Digital trigger to start other device

Hello can anyone help me create Vi to generate digital trigger to start another device. I have agilent u2531A measure card and LabView 2010, and want to generate digital trigger to start generate signal on Rigol 4000 generator.

Ok, here is a possible solution to your problem. But I am not sure it will work properly so please give me some feedback. Also, as you will see, I set a sine wave as a defaut output signal from Rigol DG4000. 
To have the functions I used for your devices, you have to install the appropriate drivers: LabVIEW>Help> Find Instruments Drivers  then select the manufacturer and select the driver from the list.
Besides, note that we usually do not support customer for the Rigol device.
I hope the attached file will work for you.
Tamara Moullet
National Instruments
Attachments:
AgilentTrigger_RigolGen.vi ‏31 KB

Similar Messages

  • Hardware digital trigger to start stop continuous analog acquisition

    Hi I have seen the following example to use digital trigger to start and stop for finite number of samples. The example names is (DigitalStartandStopTrigger.vi)
    in this example Reference Digital edge is used to stop acquisition but if I change to  continuous then Reference Digital edge stops and show an errir. Could you please let me know how can I use hardware digital trigger to start stop continuous analog acquisition. An example would be really great
    many thanks

    HI tintin_99,
    The way that example works (by modifying the read position of the buffer) essentially performs the same operation that the continuous samples mode does. That is to say, it is already a continuous acquisition.
    The article below explains this in more detail, and the reasoning behind specifying buffer size manually and other tricks used. You may have already visited it in order to get the example VI, in which case it may be worth another read over.
    http://digital.ni.com/public.nsf/allkb/BA775B0E445BFA79482571FE0032CCEB
    Kind Regards,

  • How do I open a library book on a recently acquired Samsung Nook?  I get "too many activations" error. I have an active adobe digital editions and my other devices work fine.  Custumer Support was unable to get the new device activated.

    I have a library book on the bookshelf of a newly acquired Samsung Nook but I cannot open it.  My other devices work fine but I cannot activate the new unit.  I get a "too many activations" error message.  Customer Services say I have a valid license but they deemed my problem to be a technical issue and referred me to the forum.  Thanks

    Step 1 - by trial and error...
    So far, I have been able to create physical files containing MP3 and JPG on the NAS using the Windows XP systems to copy from shared locations on the Vista and Win7 boxes.  This process has been aided by the use of a 600 GB SATA 2 capable hard drive enclosure.  I first attach to Win 7 or Win Vista and reboot to see the local drive spaces formatted on the portable device.  Then I copy files from the user's private directories to the public drive space.  When the portable drive is wired to an XP box, I can use Windows to move the files from the portable device to the NAS without any of the more advanced file attributes being copied to the NAS.  Once the files are on the NAS, I can add the new folder(s) to iTunes on any of the computers and voila, the data becomes sharable via iTunes.  So far, this works for anything that I have completely purchased, or for MP3's I made from the AIC files created when I purchased alblums via iTunes. 
    I have three huge boxes full of vynl records I've accumulated.  The ones that I've successfully digitized via a turntable attached to the sound card on one of my computers and third party software, have found their way to the NAS after being imported into iTunes and using it to bring down available album art work.  In general I've been reasonably well pleased with the sound quality of digital MP3 files created this way, but the software I've been using sometimes has serious problems automatically separating individual songs from the album tracks and re-converting "one at a time" isn't very efficient.

  • Reusing digital trigger on PCI-6733

    I am working with a PCI-6733 analog output card. I would like to use the digital trigger to start a waveform, then use it to start another waveform without stopping the first (then start a third while the first two are running, and so on). I don't need to reroute the trigger signal - all the pulses can (but don�t have to) come through the same PFI terminal.
    I haven't been able to do this with NI-DAQmx (I get errors, e.g. -50103, -89137, saying the "resources are in use"). Is it possible? Can it be done using register level programming? - looking through the register level programming guides, I didn�t see anything that indicated setting a new trigger would stop the currently running waveforms.
    Thanks in advance,
    Matt

    Hello Matt,
    I believe you can do it only if you use different PFI lines to trigger your waveforms. You won't be able to do it with one digital trigger, that's why you were getting those errors.
    Try using three PFI lines to trigger each waveform and let me know if it works please.
    LA

  • How do I use a push button digital trigger with my 6034E DAQ board?

    I am only a Lab View toddler.
    I am currently using a push button, wired to PFIO/TRIG1 and DGND, with a anolog trigger. However noise is causing my program to be triggered. I was told that a digital trigger would help to reduce the random triggering. How do I create a push button digital trigger?
    Thanks

    implement a schmitt trigger.
    Struggling with Labview wrote in message
    <[email protected]>...
    >I am only a Lab View toddler.
    >I am currently using a push button, wired to PFIO/TRIG1 and DGND, with
    >a anolog trigger. However noise is causing my program to be triggered.
    >I was told that a digital trigger would help to reduce the random
    >triggering. How do I create a push button digital trigger?
    >Thanks

  • Why does Start Digital Edge in Start Trigger.vi do a kind of timeout?

    Hi I am doing a manual trigger on my hardwareboard by inserting a 5 volt source into the selected triggerchannel a couple of seconds after I push the start button.
    The generation never starts. But if I put the trigger signalchannel  equal to the external sampling clock the appended vi work.
    Example I use PFI7 as trigger source which is also the source of the sampling clock.
    Could somebody explain?
    Kindest regards,
    Lasse
    Solved!
    Go to Solution.
    Attachments:
    Cont Gen Voltage Wfm-Ext Clk-Dig StartA.vi ‏36 KB

    One cannot just insert a wire with a 5 V potential to PFI6 for instance if PFI6 is used as a trigger for "Start Digital Edge" daqmx -vi. The pin is floating and just inserting 5V does not guarantee a low to high edge.
    If I use a potentiometer to pull the channel low first, and then increse the voltage, the trigging happens.

  • I am having problems with my outlook 2011. While i am able to check and SEND email on all my other devices ( Ipad, iphone, Macbook), I am unable to do so with my iMac. This problem started suddenly and the error message i get is error 5.7.8. Please Help

    I  am having problems with my outlook 2011. While i am able to check and SEND email on all my other devices ( Ipad, iphone, Macbook), I am unablesend any email with my iMac ( i can recieve email) . This problem started suddenly and the error message i get is error 5.7.8. I have read the threads on line and went into settings, even created a new profile, nothing helps...Please advice..is this something to do with my keychain Access?

    As Outlook is not an Apple product, you will find more helpers familiar with Outlook here:
    Office for Mac forums

  • HT1539 Digital copy transferred successfully to my computer, but not showing up in purchased list on other devices.

    Digital copy transferred successfully to my computer, but not showing up in purchased list on other devices. This is the first time I've encountered this issue. Package insert says copy is iPad compatible. Is there anything I can do to fix this? (The movie was Kung Fu Panda)

    it's a known issue. Everyone is experiencing this issue. Give it time for Apple to rectify the issue.

  • Using FF7; Syncing my data between laptop and desktop; everything syncs fine, but for the tabs. I have no history of the open tabs of the other device, nor can I find an option to let start a session the latest session of the other device

    FF7.0 beta
    sync on laptop and desktop
    no tab history of the other devices
    solution to start session with latest session of synced device?
    win 7 64bit

    Good instinct not to shut down!
    Open your current Firefox settings (AKA Firefox profile) folder using
    Help > Troubleshooting Information > "Show Folder" button
    Copy all sessionstore files (e.g., sessionstore.bak, sessionstore.js) to a safe location (e.g., your Documents folder). Whatever was saved before is in one or both of those files.
    This problem of a window sometimes loading the correct number of tabs but the tabs not being navigated to the corresponding pages has been mentioned before, but I do not recall anyone identifying what causes it or how to solve it. If Firefox saved the URLs of those pages, they will be in one or both of those sessionstore files.
    These threads have suggestions on how to "mine" the old file to extract the URLs:
    * Using Firefox's Browser Console (formerly known as Error Console): https://support.mozilla.org/en-US/questions/969046#answer-471950
    * Using Firefox developer tool "Scratchpad": http://forums.mozillazine.org/viewtopic.php?f=38&t=622036&start=60&p=12098147#p12098147
    * Using a third party website: https://firefox-session-restore.herokuapp.com/
    Can you recover them?

  • How to un-authorize adobe digital edition from other devices?

    Hi,
    I have used a few devices that had bluefire or adobe digital installed on it. when i made an attempt to install an e-book on a new device i was informedd that i could not download new content because i have used digital additions on too many devices.
    Could someone point me in the right direction in obtaining or un-authorizing those devices that I no longer have in hand.

    When you deactivate a device, the used activation is not added back to the pool.
    How do I increase the number of activations if I run out?
    You can go to this Adobe page to increase the number of activations: http://www.adobe.com/support/digitaleditions/.

  • Mac connects to wifi, but internet doesn't work. Network diagnostics shows problem starts at ISP. All software is updated and all other devices are able to effectively use the wifi source.

    Mac connects to wifi, but internet doesn't work. Network diagnostics shows problem starts at ISP. All software is updated and all other devices are able to effectively use the wifi source.

    Hi, KK93. 
    Sometimes a simple power cycle of the router and Mac can resolve the issue.  However, try the steps in the article below to troubleshoot the Wi-Fi issue with your MacBook.
    Troubleshooting Wi-Fi issues in OS X
    http://support.apple.com/kb/HT4628
    Also, see the article below to make sure the router setting have been optimized for performance.
    iOS and OS X: Recommended settings for Wi-Fi routers and access points
    http://support.apple.com/kb/HT4199
    Cheers,
    Jason

  • Problems concerning unknown login by other devices that I created for Adobe Digital Edition

    I downloaded a PDF of Toronto Notes 2014 which I bought. I downloaded the Adobe Digital Edition and creadted an account. However when I loaded the same login to Bluefire reader on my Iphone, The login was not recognized as the same login used when the pdf was downloaded. I was wondering if someone could help me reset the pdf's login info since I now can't add the pdf onto any other devices.
    Thank you
    Miroslav

    OverDrive | How to authorize Adobe Digital Editions ...

  • How not allow music start when conect the iphone5 to other device by using Bluetooth?

    How not allow music start when conect the iphone5 to other device by using Bluetooth?

    Hi Ralph,
    Ty for answer. I connect my iPhone5 to my car audio system by Bluetooth. I can listen sounds from any app installed on my iPhone. The music app starts immediatly, without any command, when the connection via Bluetooth is done. It disturbs me because I want to hear sound from another application. At this moment I do not want to listen to music. I stop the music but it return again and again every time the other app stop momentarily to talk. (This is a navigation app)
    I would like to know how to configure my iPhone5 to avoid this.
    Kind regards
    Edilson

  • How to use digital trigger with analog I/O

    How do I program analog input and/or analog output to start on a digital trigger (PFI pin) on PCI-4451/4551.
    I have tried out various configuration and succeeded in starting analog input, simultanuous input and output triggered by the the anlaog input signal. I have also succeded i triggering 4551 from the dedicated EXTTRIG pin.
    The problem is to trigger on a selectable PFI pin. I find the help for "AI Trigger Config" and "AO Trigger and Gat Config" misleading - some unsupported features seem to work while selecting PFI pin as source make the PC restart immediately.
    I have not been able to find any LabVIEW example that shows how to use PFI pin as trigger input.
    Using LabVIEW 7.1, NI-DAQ 7.3 on Windows 2000.
    Kind regards / Med venlig hilsen
    Torben

    Hello
    The PCI-4451 does not have any PFI lines. If you look at the user manual in the link beneath you will be able to confirm this by looking at the connector signal discriptions. The same is valid for the PCI-4451
    http://digital.ni.com/manuals.nsf/websearch/6A32358C53BB15F086256660007392DC?OpenDocument&node=132090_US
    The two ways of triggering that you have succeded are the analog triggering and digital triggering that you can peform with the PCI-4451.
    Regards
    Mohadjer

  • Generate counter output based on a digital trigger

    I am trying to output a train of pulse based on a digital trigger (GO bit). When the GO bit goes high, I want to output a pulse train after an initial delay (ie: 2 seconds). When the GO bit goes low, I want to stop this pulse train. When the GO bit goes high again, I want to start the same pulse train with the same initial delay.
    The output pulse train has 2 frequencies so I am using 2 counters that generate the same pulse but one of them is delayed by a certain amount. Then I combine the output from both counters into one output using simple BNC T connector. Since I am using 2 counters (max # of counters available to me), I can't create a finite pulse train.
    If I use a pause trigger, the only problem is that  the second time the GO bit goes high, the initial delay is not used (each channel or counter has a different delay).
    So far the only way I can think of is by software timing the counter (by counting the time since the task has started) and stopping the task once certain amount of time has passed. Then I wait for a second trigger which should start the pulse train again with the initial delay.
    Is there a better way to do this? 

    One more thing:
    Is there any way to use a digital trigger that is based on two different digital signals ANDed together? I basically want to output the pulses when 2 digital inputs are binary 1 at the same time.

Maybe you are looking for