Dim. SCD2 issue, when parent value change. The child loses parent history.

oracle DB: 10.2
owb: 10.2.0.4
Create a SCD2 type dimension with six levels in it. Alle levels have the same columns, see below (change the nr for the level)
L1_KPL_PK
L1_DATA_TILL
L1_SLEUTEL
L1_DESC
L1_DATA_FROM
L1
When running the mapping, the hierachie is perfectly inserted into the table. When changing the
value of the L1 parent in te source and running the mapping again the following
is happend:
He closed the parent record with the old value and insert a till date.
He update alle child record with the new value
He inserts a new record with the new value of the parent.
What i should expect wat would happen was:
He closed the parent record with the old value and insert a till date.
He close alle child records with the old value and insert a till date.
He inserts new records for all child with the new value of the parent.
He inserts a new record with the new value of the parent.
I searched on the net for this issue and i found oracle fixed it in a patch 10.2.04 The bug is know under nr 6004133
"Child looses parent reference when SCD2 attribute change in parant.
Installed the patch(7005587) and renewed my dimension, table, and mapping in the repository. Ran the mapping, but the result is not what i expexted as
descriped above.
Help needed to fix this issue. So alle histoy is beeing saved.

Hi
There was a change in OWB 10.2.0.3 (I think it was this patch) to support this scenario.
If you go to the SCD settings panel for your dimension, each level also has the parent level's identifying column (this is the new bit) and you can set the Record History property for the parent identifier in order that a change in this will trigger history in the level (so the hierarchy can be versioned). So if you set this and synchronize the dimension operator in your map and redeploy the map, you should be in shape.
So for example if you had L1, L2, L3 with attributes ID, NAME, ATT, EFF_DATE and EXP_DATE then the SCD panel would have;
*L1
ID
NAME
EFF_DATE eff date
EXP_DATE exp date
ATT trigger history
*L2
ID
NAME
EFF_DATE eff date
EXP_DATE exp date
ATT trigger history
L1_ID trigger history
*L3
ID
NAME
EFF_DATE eff date
EXP_DATE exp date
ATT trigger history
L2_ID trigger history
Let me know if its unclear.
Cheers
David

Similar Messages

Any pointer to look into, when buyers cannot change the payment terms

Any pointer to look into, when buyers cannot change the payment terms on the POs due to the error u201CExpected/Overall value should be equal or greater than invoiced amountu201D
A thought process to look around, to investage this issue is appreciated.
Thx/RICK

Rick,
this message may be due to the user trying to change a Purchase order item payment terms when there is already a blocked supplier invoice registered for the item. The vendor invoice payment terms normally override the PO payment terms. Users sometimes think they can speed up payment to a vendor by changing the payment terms on the PO. This can only be done before an invoice is registered and the PO term can be overridden at invoice entry time in any case.
Have a look at the terms on any associated invoice and the vendor record for the Purch org.
You may also want to have a look at your business process for blocked invoice resolution.
If the user wishes to speed up payment of an invoice they need to contact the users who are responsible for the vendor payments. We call them AP staff in our org - stands for Accounts Payable.
Hope this helps
Allen

Workflow not triggered when i have changed the PO

Hi,
We have custom fields (Price) in PO Header as well as in item. when we update in header the price should get distributed to items.
we have custom workflow evernt (changed) to update the items if user change in header. But the issue is if user changes the items and save the po, it is not updating immediatly. after we come back to Purcahse Order and save the purcahse order again then it updates the table.
Is there any reason why the event is not triggered when the PO was changed initially.

Hello,
"We have custom fields (Price) in PO Header as well as in item. when we update in header the price should get distributed to items. "
If you update a price in the header, how/why would that be distributed to the items? Is this a total price of the whole PO? Why not just have it in the header?
"we have custom workflow evernt (changed) to update the items if user change in header."
OK. Strange, but OK.
"But the issue is if user changes the items and save the po, it is not updating immediatly"
I thought it was supposed to happen when the users changed the header, not the items.
If you really have a workflow to update the items when the header is changed, then maybe it's not succeeding if the PO items are locked, eg by having them on your screen. Did the worklow actually start? Any error messages?
rgards
Rick Bakker
hanabi technology

Graphic card problem maybe? Since when I have changed the hard drive to my macbook pro and I installed all the new softwares, my mac is very slow and the screen gives crazy pictures,could maybe be the graphic card, does anybody have experienced this?

Graphic card problem maybe? Since when I have changed the hard drive to my macbook pro and I installed all the new softwares, my mac is very slow and the screen gives crazy pictures,could maybe be the graphic card, does anybody have experienced this?

after a restart it works for a time, but always slow. I went to the Applestore this afternoon and the made a check and said it would be the logicboard and they would have to change it for CHF 600 and it would be ready in 10 - 15 days

Hi there! So I am using Lightroom 3 on a pc and I have ran into an issue when exporting images. The DPI and image size (in inches) that I am selecting during the export process. For example I just exported a collection and set the dpi to 180 and the size

Hi there! So I am using Lightroom 3 on a pc and I have ran into an issue when exporting images. The DPI and image size (in inches) that I am selecting during the export process. For example I just exported a collection and set the dpi to 180 and the size to 7 inches on the long edge. My exported result is 457 dpi and sized at 3200x2134 pixels.. Any ideas on why this is happening and what I can do to correct it?

The DPI setting in a digital image has no meaning at all. You need to learn how to calculate what you need in your exported image. The only measurement in a digital image that has any meaning is the number of pixels in each direction. It doesn't matter what you set that DPI to (actually it's PPI or pixels per inch). The image will have the same number of pixels regardless of the setting. If you need an image that is 5 x 7" (for example) at 200 PPI then you would want an image that measured:
5 x 200 = 1000 pixels
7 x 200 = 1400 pixels
So you would need an image that is 1000 x 1400 pixels to have a 5 x 7" image at 200 PPI. The reason your exported image had such a high PPI setting is because you specified the number of inches you wanted the image to be. And there were enough pixels in the image that it calculated out to be that high PPI setting.
I apologize, I don't explain this very well. But you need to learn to do the math to determine how large you really want your exported images to be.

I recently changed my wallpaper and when i was on safari the rainbow wheel popped up and i had to restart my computer, now theres no wallpaper it just a grey denim and when i try change the wallpaper only the tool bar changes not the background, help ?

i recently changed my wallpaper and when i was on safari the rainbow wheel popped up and i had to restart my computer, now theres no wallpaper it just a grey denim and when i try change the wallpaper only the tool bar changes not the background, help ?

Hi. When you were in the recovery drive doing permissions, did you try and run a repair of the boot drive? Did you try single user mode? Try these first and then go back and try to reinstall the operating system.When I say repair boot drive I don't mean permissions. There are both options in disk utilities.When you open disk utilities ,you will see in the left column two drives plus possibly a boot partition that look like an external driv. click on the second drive and in first aid use repair disk. If you still can't boot and it will not let you restore, you may have to do a clean install. http://support.apple.com/kb/PH18869?viewlocale=en_US

How is the resolution variable or when would we change the resolution of an image and why?

How is the resolution variable or when would we change the resolution of an image
and why?

It all depends on the output:
* for viewing on screen 90 -120 ppi
* for printing on a laser printer 180 -300 ppi
* for printing on a desktop printer 240 - 300 ppi
Some people claim 360 ppi is optimum but I don't see any difference compaired to 300 ppi at least not with the naked eye...

Job scheduling(passing the values to the child program)

when i'm trying to schedule a background job(using job_open job_submit and job_close) i'm passing the values of the selection screen(parent program) to my child program using set parameter id. And trying to get the values using get parameter id in the cild program.
But the values of the parent program are not being passed to the child program what may be the cause for it?

rathan,
Why con't you use
SUBMIT... [VIA SELECTION-SCREEN]
[USING SELECTION-SET <var>]
[WITH <sel> <criterion>]
[WITH FREE SELECTIONS <freesel>]
[WITH SELECTION-TABLE <rspar>].
When you start an executable program, the standard selection screen normally appears, containing the selection criteria and parameters of both the logical database connected to the program and of the program itself (see Direct Execution - Reports). When you start an executable program using SUBMIT, there are various additions that you can use to fill the input fields on the selection screen:
SUBMIT... [VIA SELECTION-SCREEN]
[USING SELECTION-SET <var>]
[WITH <sel> <criterion>]
[WITH FREE SELECTIONS <freesel>]
[WITH SELECTION-TABLE <rspar>].
These options have the following effects:
VIA SELECTION-SCREEN
The selection screen of the called executable program (report) appears. If you transfer values to the program using one or more of the other options, the corresponding input fields in the selections screen are filled. The user can change these values. By default, the system does not display a selection screen after SUBMIT.
USING SELECTION-SET <var>
This option tells the system to start the called program with the variant <var>.
WITH <sel> <criterion>
Use this option to fill individual elements <sel> of the selection screen (selection tables and parameters). Use one of the elements <criterion>:
<op> <f> [SIGN <s>], for single value selection
If <sel> is a selection criterion, use <op> to fill the OPTION field, <f> to fill the LOW field, and <s> to fill the SIGN field of the selection table <sel> in the called program.
If <sel> is a parameter, you can use any operator for <op>. The parameter <sel> is always filled with <f>.
[NOT] BETWEEN <f1> AND <f2> [SIGN <s>], for interval selection
<f1> is transferred into the LOW field, <f2> into the HIGH field, and <s> into the SIGN field of the selection table <sel> in the called program. If you omit the NOT option, the system places the value BT into the OPTION field; if you use NOT, the system fills OPTION with NB.
IN <seltab>, transferring a selection table
This addition fills the selection table <sel> in the called program with the values of the table <seltab> in the calling program. Table <seltab> must have the structure of a selection table. Use the RANGES statement to create selection tables.
WITH FREE SELECTION <freesel>, user dialog for dynamic selections
To use this option, the called program must be connected to a logical database that supports dynamic selections. In the calling program, use the function modules FREE_SELECTIONS_INIT and FREE_SELECTIONS_DIALOG. They allow the user to enter dynamic selections on a selection screen. One export parameter of these function modules has structure RSDS_TEXPR from the RSDS type group. Transfer the values of this export parameter by means of the internal table <freesel> of the same structure to the called report.
WITH SELECTION-TABLE <rspar>, dynamic transfer of values
You need an internal table <rspar> with the Dictionary structure RSPARAMS. The table then consists of the following six fields:
SELNAME (type C, length 8) for the name of the selection criterion or parameter
KIND (type C, length 1) for the selection type (S for selection criterion, P for parameter)
SIGN, OPTION, LOW, HIGH as in a normal selection table, except that LOW and HIGH both have type C and length 45.
This table can be filled dynamically in the calling program with all of the required values for the selection screen of the called program. If the name of a selection criterion appears more than once, the system creates a multiple-line selection table for that criterion in the called program. If the name of a parameter appears more than once, the system uses the last value. Note that LOW and HIGH have type C, so that the system executes type conversions to the criteria of the called program. This is important for date fields, for example. Before your program is used in a live context, you should check it using the VIA SELECTION-SCREEN addition.
Except for WITH SELECTION-TABLE, you can use any of the above options several times and in any combination within a SUBMIT statement. In particular, you can use the WITH <sel> option several times for one single criterion <sel>. In the called program, the system appends the corresponding lines to the selection tables used. For parameters, it uses the last value specified. The only combination possible for the WITH SELECTION-TABLE option is USING SELECTION-SET.
If the input fields on the selection screen are linked to SPA/GPA parameters, you can also use this technique to pass values to the selection screen (see Passing Data Between Programs).
The following executable program (report) creates a selection screen containing the parameter PARAMET and the selection criterion SELECTO:
REPORT demo_program_submit_rep1.
DATA number TYPE i.
PARAMETERS      paramet(14) TYPE c.
SELECT-OPTIONS selecto FOR number.
The program DEMO_PROGRAM_SUBMIT_REP1 is called by the following program using various parameters:
REPORT demo_program_submit_sel_screen NO STANDARD PAGE HEADING.
DATA: int TYPE i,
      rspar TYPE TABLE OF rsparams,
      wa_rspar LIKE LINE OF rspar.
RANGES seltab FOR int.
WRITE: 'Select a Selection!',
SKIP.
FORMAT HOTSPOT COLOR 5 INVERSE ON.
WRITE: 'Selection 1',
     / 'Selection 2'.
AT LINE-SELECTION.
CASE sy-lilli.
    WHEN 4.
      seltab-sign = 'I'. seltab-option = 'BT'.
      seltab-low = 1.   seltab-high   = 5.
      APPEND seltab.
      SUBMIT demo_program_submit_rep1 VIA SELECTION-SCREEN
                      WITH paramet eq 'Selection 1'
                      WITH selecto IN seltab
                      WITH selecto ne 3
                      AND RETURN.
    WHEN 5.
      wa_rspar-selname = 'SELECTO'. wa_rspar-kind = 'S'.
      wa_rspar-sign = 'E'. wa_rspar-option = 'BT'.
      wa_rspar-low = 14. wa_rspar-high = 17.
      APPEND wa_rspar TO rspar.
      wa_rspar-selname = 'PARAMET'. wa_rspar-kind = 'P'.
      wa_rspar-low = 'Selection 2'.
      APPEND wa_rspar TO rspar.
      wa_rspar-selname = 'SELECTO'. wa_rspar-kind = 'S'.
      wa_rspar-sign = 'I'. wa_rspar-option = 'GT'.
      wa_rspar-low = 10.
      APPEND wa_rspar TO rspar.
      SUBMIT demo_program_submit_rep1 VIA SELECTION-SCREEN
                      WITH SELECTION-TABLE rspar
                      AND RETURN.
ENDCASE.
Pls. reward if useful...

Issue using JS to change the value of an output text component dynamically

I am developing an application and I need to change the output text component value at run time when the mouse moves over a field. I am using javascript and then using UIComponent.setproperty to change the value.
I am not able to do this and am getting nothing.
Kindly let me know what am I doing wrong
I am using ADF 11g (10th November release).
Regards,
Deepak

Hi i'm doing the same thing with an input text
here is my code
jspx:
<af:inputText value="#{bindings.MiddleName.inputValue}"
label="#{bindings.MiddleName.hints.label}"
required="#{bindings.MiddleName.hints.mandatory}"
columns="#{bindings.MiddleName.hints.displayWidth}"
maximumLength="#{bindings.MiddleName.hints.precision}"
shortDesc="#{bindings.MiddleName.hints.tooltip}"
id="it4" autoSubmit="true">
<f:validator binding="#{bindings.MiddleName.validator}"/>
<af:clientListener type="valueChange" method="mo_UpperCase"/>
</af:inputText>
js:
function mo_UpperCase(event){
var inputField = event.getSource();
if (event.getNewValue().toUpperCase()!=event.getNewValue())
inputField.setValue(event.getNewValue().toUpperCase());
In my case i change the input text to upercase when the value is changing
I hope it works with output text also,
change my examples clientlistener type from valueChange to mouseOver
If you have more than one component and you need to pass parameters check this thread also:
bug at af:clientAttribute 11.1.1.2.0
Tilemahos

When I try change the color of the edge ui only change the color of the top line

Hi,
When I have tried to change the color of the edge field with this command:
$.ui.#textEdit.border.edge.color.value="255,255.255" only change the color of the top line.
Somebody know why?
Thanks
Ruben

I'd like to add i've encountered the same issue. I've found out that you can use the object appearance options to reset the borders to the same properties for all edges and corners. We have custom properties for the border of a field and i needed to set the border to 0mm and back to the default 0.018 mm and our color using the option "edit together". After that, the script to change the border color works for all edges, i suppose it'll work the same for the presence.
Regards,
Marijn Sponselee.

How to put a page break when a value changes

Hi there, I am very new to BI Publisher. I realize this is a really SIMPLE question, but I can't seem to find a CLEAR answer.
I have a set of data that I have a repeating group for in my RTF template and it works great. But I want to have a page break each time one of the values changes and I cannot figure out how.
here is the xml
<?xml version="1.0" encoding="UTF-8" ?>

<PIR05>
<LIST_G_ITEM_NO>
<G_ITEM_NO>
<PAGE_NO>0</PAGE_NO>
<ITEM_NO>4242301</ITEM_NO>
<ITEM_DESC1>13MM Aries Cell Assembly</ITEM_DESC1>
<LOT_NO>123</LOT_NO>
<LOT_DESC>4242301</LOT_DESC>
<SUBLOT_NO />
<LOCATION>2IRE</LOCATION>
<GRADE_CODE>NONE</GRADE_CODE>
<ITEM_UM>Each</ITEM_UM>
<ITEM_UM2 />
<LINE_NO>614</LINE_NO>
<COUNT_NO>614</COUNT_NO>
<P_ITEMUM2LABEL />
<P_ITEMUM2DASH />
<F_ITEMUM2>1</F_ITEMUM2>
<P_CSITEMUM2_LABEL />
<P_CSITEMUM2_DASH />
</G_ITEM_NO>
- <G_ITEM_NO>
<PAGE_NO>0</PAGE_NO>
<ITEM_NO>4242301</ITEM_NO>
<ITEM_DESC1>13MM Aries Cell Assembly</ITEM_DESC1>
<LOT_NO>1232</LOT_NO>
<LOT_DESC>4242301</LOT_DESC>
<SUBLOT_NO />
<LOCATION>2IRE</LOCATION>
<GRADE_CODE>NONE</GRADE_CODE>
<ITEM_UM>Each</ITEM_UM>
<ITEM_UM2 />
<LINE_NO>615</LINE_NO>
<COUNT_NO>615</COUNT_NO>
<P_ITEMUM2LABEL />
<P_ITEMUM2DASH />
<F_ITEMUM2>1</F_ITEMUM2>
<P_CSITEMUM2_LABEL />
<P_CSITEMUM2_DASH />
</G_ITEM_NO>
<G_ITEM_NO>
<PAGE_NO>0</PAGE_NO>
<ITEM_NO>4242301</ITEM_NO>
<ITEM_DESC1>13MM Aries Cell Assembly</ITEM_DESC1>
<LOT_NO>562354</LOT_NO>
<LOT_DESC>4242301</LOT_DESC>
<SUBLOT_NO />
<LOCATION>WOR RECV</LOCATION>
<GRADE_CODE>NONE</GRADE_CODE>
<ITEM_UM>Each</ITEM_UM>
<ITEM_UM2 />
<LINE_NO>603</LINE_NO>
<COUNT_NO>603</COUNT_NO>
<P_ITEMUM2LABEL />
<P_ITEMUM2DASH />
<F_ITEMUM2>1</F_ITEMUM2>
<P_CSITEMUM2_LABEL />
<P_CSITEMUM2_DASH />
</G_ITEM_NO>
</LIST_G_ITEM_NO>
<WHSE_DESC>OPM INVENTORY ORG</WHSE_DESC>
<CS_NODATA>617</CS_NODATA>
<CYCLE_NO>000000014</CYCLE_NO>
</PIR05>
I want the g_item_no (repeating group) to have a page break each time LOCATION changes.

You can declare two variables, to hold the previous and current LOCATION values and break the page when it differs.
Or just before your end-for-each, have this code.
<?if:position()!=1 and position()!=last() and LOCATION!=following::LOCATION[1]?><xsl:attribute name="break-before">page</xsl:attribute><?end if?>
Ensure that its placed in a form field.
This will have a page break when LOCATION changes.

LineChart and -fx-text-fill issue: how do I change the color of the labels

Hello everyone,
I'm currently facing an issue when I'm trying to style my LineChart with some CSS. Indeed I would like to change the color of the labels of my xAxis (CategoryAxis) and yAxis (NumberAxis) but it's not working.
In my FXML file I tried to use the style attribute on my LineChart tag using: <LineChart style="-fx-text-fill: white"> with no result, the text remains black (even for the title of my chart). In order to know if the style attribute is well parsed I changed it to: style="-fx-background-color: red; -fx-text-fill: white;". The background is becoming red but the text still remains black.
Finally I tried to define a stylesheet in my controller class with the same properties (red background and white text). My stylesheet is this one:
.chart {
-fx-text-fill: white;
-fx-background-color: red;
}In my controller I do the following line in order to load my CSS file:
this.chart.getStylesheets().add(getClass().getResource("statistics-style.css").toExternalForm());Even with this option the text remains white, while the background becomes red.
What I also tried is to put the -fx-text-file CSS property directly on my axises, but again it seems it is ignored.
I followed the steps described in Figure 8-2 of this site: http://docs.oracle.com/javafx/2/charts/css-styles.htm
Does anybody have an idea or encountered this issue?
Thank you very much,
Thierry.
PS: I'm using JFX 2.1 on MacOS X
Edited by: twasyl on May 8, 2012 7:57 AM
Edited by: twasyl on May 8, 2012 7:59 AM

Hi,
I figured a solution out to solve my problem. Currently in the documentation it is said to redefine the .chart CSS class in order to change the color of the title and labels text. But this is not working. Strangely the following code changes the font-size of both title and labels but ignores the -fx-text-fill property:
.chart {
-fx-font-size: 20pt;
-fx-text-fill: white;
}In order to change the color of the title I override the .chart-title CSS class:
.chart-title {
-fx-text-fill: white;
}And for the labels:
.axis-label {
-fx-text-fill: white;
}Well I don't know if there still is a bug on the .chart CSS class or maybe that behavior is expected.

How to Get checkbox value when List value changed in classic report

hi ,
i worked with apex 4.2 and i create normal classic report with one checkbox column and one column change it to select list(named loved) now i want when user change list
take value of checkbox item and show it in message .
SQL for report
SELECT
'<INPUT TYPE="checkbox" NAME="f01" VALUE="'
||SEQ
||'">' SEQ,
ID,
DEPT_NO,
EMP_NAME} i change the column attributes of Dept_NO to Display as Select list of department name (named lov).
now i want when user change name of department the value of SEQ SHOW IN ALERT MESSAGE
i create JavaScript on the page
function test(pThis) {
var f01_value = $('select[name="f01"]').value;
alert('#SEQ : '+ f01_value);
</script>
I call this javascript function when list change but the value undefined..
My Question :
How can get this value Or any value of item in reports
regards
Ahmed

Hi Ahmed,
>
i worked with apex 4.2 and i create normal classic report with one checkbox column and one column change it to select list(named loved) now i want when user change list
take value of checkbox item and show it in message .
SQL for report
SELECT
'<INPUT TYPE="checkbox" NAME="f01" VALUE="'
||SEQ
||'">' SEQ,
ID,
DEPT_NO,
EMP_NAME} i change the column attributes of Dept_NO to Display as Select list of department name (named lov).
>
You should not create checkboxes like this. Either use the APEX_ITEM.CHECKBOX2 API or change the Column Type to Simple Checkbox.
>
now i want when user change name of department the value of SEQ SHOW IN ALERT MESSAGE
i create JavaScript on the page
function test(pThis) {
var f01_value = $('select[name="f01"]').value;
alert('#SEQ : '+ f01_value);
</script>
>
name="f01" returns an array, what you need is single element value.
Try
<script type="text/javascript>
function test(pThis) {
var f01_value = $v(pThis);
alert('#SEQ : '+ f01_value);
</script>
{code}
{quote}
I call this javascript function when list change but the value undefined..
My Question :
How can get this value Or any value of item in reports
{quote}
Depends in how you are invoking/triggering the change event. Are you using DA or have you written an "onchange" event on the element?
Cheers,

Estimated recalc flag not set when option value changed

Hi,
Here is the problem.
when i change the option value using front end and ran the procedure in dev, one for exprecalc and the other for estm recalc,then estimated flag & expense flag changed to 25964.which is correct.
when i repeated the same process in UAT,only expense is changing 25964
but not estimated,it remains 26040.
only one record is there.
for '03/14/2003', i changed the option value
select estm_reclcn_c,exps_reclcn_c from grn
where grn_d=to_date('03/14/2003','mm/dd/yyyy')
and org_grp_i=44;
what might be the reason.Any clue
Thanks in advance.

Hello 511111,
You haven't given us much to go on but it sounds like there are differences in either the software (PL/SQL, SQL etc) or the data between your dev and uat environments that is causing the differing behaviour.
Cheers,
Colin

Error when trying to change the look of a site collection

Hello everyone!
I have a single-server on-premise installation of SharePoint 2013 and I noticed that you can change the way fonts, colors etc. are used on a site collection by selecting "Change the look" from the site settings. However when I browse the page I
get an empty page with the spinner on the right just going in circles.
The browser log displays an error from _layouts/15/designgallery.js with this message:
SyntaxError: JSON.parse: unexpected character
The file is minified so unfortunately it does not tell me much more. However I also noticed a call to the webservice at /_layouts/15/designdata.ashx?hashcode=-1638098219&lcid=1033. Although this call returned a http 200 response the page turned out to
be the "Sorry, something went wrong"-page with a correlation id as well. Looking up the correlation id in the trace log I found this unexpected error
Application error when access /_layouts/15/designdata.ashx, Error=Object reference not set to an instance of an object.
at Microsoft.SharePoint.Utilities.ThemeFontFace.Create(XPathNavigator xpnFontNode, XmlNamespaceManager nsm)
at Microsoft.SharePoint.Utilities.ThemeFont.Populate()
at Microsoft.SharePoint.Utilities.SPFont.Initialize(Stream stream)
at Microsoft.SharePoint.Utilities.SPFont.Open(SPFile file, Boolean readPublishedVersion)
at Microsoft.SharePoint.Utilities.SPFont.GetFontSchemesFromFolder(SPWeb themesWeb, String folderUrl)
at Microsoft.SharePoint.Utilities.SPFont.GetFontSchemesFromFolder(SPSite site, String strThemeFolder)
at Microsoft.SharePoint.ApplicationPages.DesignDataDownloadHandler.GenerateFontSchemeData()
at Microsoft.SharePoint.ApplicationPages.DesignDataDownloadHandler.ProcessRequest(HttpContext context)
at System.Web.HttpApplication.CallHandlerExecutionStep.System.Web.HttpApplication.IExecutionStep.Execute()
at System.Web.HttpApplication.ExecuteStep(IExecutionStep step, Boolean& completedSynchronously)
Has anyone encountered this error before or knows what the issue might be? I suspect that this error prevents me from changing the look of the site collection.

Hi,
According to your post, my understanding is that the “Change the look” page displayed blank, and it still shown working on it.
This issue is always related to system requirenment. Did your environment fit for the hardware and software requirements for SharePoint ?
You can check with the following article:
http://technet.microsoft.com/en-us/library/cc262485.aspx
Did the issue occur in other site collection or web application?
You can refresh the page or reopen the page to check whether it loading.
Did you find any error or unexpected occurred in the ULS log or event log?
For SharePoint 2013, by default, ULS log is at
C:\Program Files\Common Files\Microsoft Shared\Web Server Extensions\15\LOGS
Thanks & Regards,
Jason
Jason Guo
TechNet Community Support

Dim. SCD2 issue, when parent value change. The child loses parent history.

Similar Messages

Maybe you are looking for