Dimension member formulas

Hello Xperts,
What is meant by dimension member formulas

Dimension formulas , can be specified in FORMULA propety. If account A has dimension formula Account.B-Account.C , value of Account A is calculated on the fly . Calculate value is not stored in cube .Only at the time of reporting values are calculated .
Hope this helps.

Similar Messages

SAP BPC - Recursive Dimension Member Formulas

Hi BPC community,
We have a customer requirement to create recursive dimension member formulas. Has anyone dealt with this topic before?
Example:
Account A = Account B * .05
Account B = Account A + Account C.
Account D = Account B * .10
Thanks,
Jeff Holdeman
EPM RIG

Hi Nicolas,
Thanks for pointing us in the right direction. The math actually turns out a little different, as I think you slipped a decimal. But none the less, your contribution is MUCH appreciated.
Here is the proposed solution. For more details, we also need to utilize the solve_order parameter to force the system to calculate the dimension formulas in the proper sequence. Zero is the highest priority.
Assume...
A = B * .05
B = A + C
C = input
D = B * .10
Therefore solving for B...
B = (B * .05) + C
B = .05B + C
B - .05B = C
.95B = C
B = (1 / .95) * C
And...
D = (1 / .95) * C * .10
For example, if C = 100...
B = (1 / .95) * 100 = 105.26
A = 105.26 * .05 = 5.26
D = 105.26 * .10 = 10.53
I'll assume there are two accounts for "C"; one for input and one as a formula.
[Account].[C] = [Account].[C input][, solve_order = 1]
[Account].<b> = [Account].[C] * 1 / .95[, solve_order = 2]
[Account].[A] = [Account].<b> * .05[, solve_order = 3]
[Account].[D] = [Account].<b> * .10[, solve_order = 4]
Edited by: Jeffrey Holdeman on Aug 11, 2008 5:58 PM

Need to create a dimension member formula refering hierarchy.

Hello Experts ,
System : BPC 10 NW SP 11
Dimension : BOOK – entity type
Dimension : ACCOUNT - Account type
Scenario : create a ACCOUNT dim member formula effecting only members exists in Entity dimension PARENTH3, with property MGMT_CALC = Calc.
I tried below syntax : but none of them working.
IIF([BOOK.PARENTH3].CURRENTMEMBER.PROPERTIES("MGMT_CALC")="CALC", (IIF ([PNC_REV]=0,0,[ACCOUNT].[PNC_UUND_TOT]/[ACCOUNT].[PNC_REV])),NULL); SOLVE_ORDER=10
IIF([BOOK].[PARENTH3].CURRENTMEMBER.PROPERTIES("MGMT_CALC")="CALC", (IIF ([PNC_REV]=0,0,[ACCOUNT].[PNC_UUND_TOT]/[ACCOUNT].[PNC_REV])),NULL); SOLVE_ORDER=10
IIF([BOOK.H3].CURRENTMEMBER.PROPERTIES("MGMT_CALC")="CALC", (IIF ([PNC_REV]=0,0,[ACCOUNT].[PNC_UUND_TOT]/[ACCOUNT].[PNC_REV])),NULL); SOLVE_ORDER=10
In case I am not reading hierarchy as in below syntax, it works fine.
IIF([BOOK].CURRENTMEMBER.PROPERTIES("MGMT_CALC")="Calc", (IIF ([PNC_REV]=0,0,[ACCOUNT].[PNC_UUND_TOT]/[ACCOUNT].[PNC_REV])),NULL); SOLVE_ORDER=10
The requirement is to read PARENTH3 members with specific property value.
Thanks in advance
Pavan

Hi Pavan,
I believe there is a similar thread to which I have responded.
Your formula is based on a condition with a property. A property value is applicable to the member irrespective of which hierarchy it belongs to. So, why do you need to consider the hierarchy for your formula?
Hope this helps.

How can I create a dimension member formulas involving parent member?

Hi everyone,
I'm trying to learn BPC- Planning and I've got the following issue:
Behind each key figure is a calculated formula which will not be calculated in the aggregated parent member ( Energie Kosten). It's a IF formula based on percentage. As far as I understood it's not possible in BPC NW 10. to store values at parent level and parent member doesn't aggreagte child values that are calculated members. What can I do to solve the problem? The only solution will be the logic scripts?
Any input is appreciated.
Thank you!

Hi Vadim,
thank your for your answear.
Here it's my formula:
IIF([KENNZAHL].[S_PSTROM] = 0 , [KENNZAHL].[E_PSTROM] ,[KENNZAHL].[S_PSTROM] * ([KENNZAHL].[BELGES] *[KENNZAHL].[TAGEMON] ))
where: S_PSTROM = percentage key figure
         E_PSTROM = manual input key figure
         BELGES = allocation
         TAGEMON= days per month
The formula is used to calculate the energy. If there are adjustments used then will be calculated using the percentage if there are no adjustment needed that should take automatically the manually entered values.
It's used only a hierarchy- PARENTH1. And only the dimension without calculated members are calculated in nodes.
Thank you a lot!

Do the custom rollup member formulas work recursively for parent child dimension?

Hi
We have custom rollup set up for Account dimension which is parent child.
It seems to work fine when the custom member formula refers to a base account member i.e. if the formula for MemberKey4 is (MemberKey1 + MemberKey2) then it shows the sum of the underlying members 1 and 2.
But if the formula for MemberKey10 is (MemberKey3 + MemberKey4) then it should evaluate the value for MemberKey4 first and then add to it value for MemberKey3 to come up with final number for MemberKey10.
Do the custom rollup work fine with the recursive calculations? Is this recursion limited to some level?
Thanks
Shailesh

Hi Jorg,
Thanks for your input.
Actually the hierarhcy is more determined by the parent child relationship. So we cannot move the members as per the formula. And further the formulas are not always additive, there are divisions and multiplactions happening also.
Further the calculated members (account members) are used in different places, the usage level of calculated members could be 3 in some cases i.e. MemberKey15 = (calculated using MemberKey10 = (calculated using MemberKey7 = (Calculated using MemberKey4 = (calculated using base members)))). Now inserting the base members in place of a calcuated member becomes more of string manipulation.
And on the top of above complexity, the formulas are not static and they are more user defined, they may change between time periods, which forces us to write a dynamic procedure to translate the 'business formula' into SSAS formula. We expect the custom rollup to work as expected (i.e. if the formula contains a calculation involving the calculated member, it should resolve that first and so on) and we have written generic procedure to replace the Account Code in the 'business formula' with the accont key value with the account hierarchy char string.
In the link http://doc.ddart.net/mssql/sql2000/html/olapdmad/agmdxadvanced_6jn7.htm for AS2000, it talks about the calculation pass deapth, it says:
.......If a cube has custom rollup formulas or custom rollup operators, a second calculation pass is performed to handle the computations needed to calculate these features.......
Now from the above, it is obvious that the OLAP engine will automatically go into recursion if the formula contains a cacluated member and it knows that the calculated member has to be resolved first before calculating the final formula result. The above article also talks about 'Calculation Pass Number' property in the AdvanceCube Editor (AS2000), which can be set to the value depending on the expected number of passes required in a given scenario. I don't find such an equivalent peoperty for SSAS 2005.
Would anybody please throw some more ideas / insights on this issue?
Jorg, thanks again for your input...
Shailesh

Essbase ASO - How to aggregate all Parents in multiple dimensions when using member formulas

We are trying to add a few MDX member formulae on some of our Accounts in the ASO cube. We recently understood that member formulas in ASO calculate both LEVEL0 and Parent members of other dimensions, So we are trying to tell Essbase to calculate LEVEL0's only and to aggregate all other levels in all dimensions. However we are unable to get the syntax right. Below is what we so far have
AccA has below formula:
CASE WHEN ISLEVEL([Period].Currentmember,0)
THEN
AccX+AccY
WHEN ISLEVEL([Period].Currentmember,1) OR ...etc
THEN SUM({LEAVES([Period].Currentmember)},[AccA])
END
This does work fine and gives correct values for Parent members in Period dimension. But we also have 3 other dimensions like Product, Area and Entity. We tried the below but this throws an error during retrival.
CASE WHEN ISLEVEL([Period].Currentmember,0)
THEN AccX+AccY
WHEN ISLEVEL([Period].Currentmember,1) OR ...etc
THEN SUM({LEAVES([Period].Currentmember),LEAVES([Product].Currentmember)},[AccA])
END
Should we add multiple SUM commands in there? All we want to do is tell Essbase to aggregate all other dimensions to parent levels. Please help.

Sorry to reiterate the post again.
DanPressman Was wondering what would be other way to write calculations other than Accounts.
I have a case where the user wants to calculate Ending Equity and this should be calculated at level0 using the rates and all parents of entity has to aggregate.
1. Level0 of entities calculate with rates
2. aggregate its children to parent entity
I have used solve order to get it work but taking a lot of time.
Is there any other alternative way of doing it? Which other dimension i can choose to perform this calculation? This is exactly similar to productsum calculation

Help needed in BPC 10 Member Formula

Hello Experts,
We are in BPC 10 NW SP 11.
Facing below error in report for Ratios hierarchy after
member formula is built.
Formulas is related to ratio
IIF([ACCOUNT_GL].[RE_IREV]=0, NULL, [ACCOUNT_GL].[RE_IAADJ]/[ACCOUNT_GL].[RE_IREV]);SOLVE_ORDER=10
RE_IREV is Income node
RE_IAADJ is expense node.
I have tried formula by removing square brockets for ACCOUNT
DIM member. Still no success.
Surprisingly, same formula, same hierarchy works fine in
another Model.
I have also compared measures in both the models, both are
identical.
Error in the report as below.
Server message:
code: UJO_READ_EXCEPTION_018
severity: error
description: MDX statement error: Value RE_IREV
/CPMB/WADNXJI for characteristic /CPMB/WADNXJI unknown
log id: KoFXP08mHM3X08002fJHZW
DATAVALUE: Value RE_IREV /CPMB/WADNXJI for characteristic
/CPMB/WADNXJI unknown
MDX: WITH MEMBER
[Measures].[PERIODIC] AS 'IIF([/CPMB/WADNXJI
PARENTH2].[2/CPMB/ACCTYPE]="INC",-[Measures].[/CPMB/SDATA],IIF([/CPMB/WADNXJI                 PARENTH2].[2/CPMB/ACCTYPE]="EXP",[Measures].[/CPMB/SDATA],IIF([/CPMB/WADNXJI
PARENTH2].[2/CPMB/ACCTYPE]="AST",([Measures].[/CPMB/SDATA],
CLOSINGPERIOD([/CPMB/WADBQQD
PARENTH1].[LEVEL02])),IIF([/CPMB/WADNXJI                 PARENTH2].[2/CPMB/ACCTYPE]="LEQ",-([Measures].[/CPMB/SDATA],
CLOSINGPERIOD([/CPMB/WADBQQD
PARENTH1].[LEVEL02])),-[Measures].[/CPMB/SDATA]))))' SOLVE_ORDER=3 MEMBER [/CPMB/WADNXJI                 PARENTH2].[RE_ALAE_RATIO] AS
'IIF([/CPMB/WADNXJI
PARENTH2].[RE_IREV                         /CPMB/WADNXJI]=0,
NULL, [/CPMB/WADNXJI
PARENTH2].[RE_IAADJ
/CPMB/WADNXJI]/[/CPMB/WADNXJI                 PARENTH2].[RE_IREV                         /CPMB/WADNXJI])'
SOLVE_ORDER=10 SELECT NON EMPTY {[/CPMB/WADBQQD                 PARENTH1].[2013.Q1                         /CPMB/WADBQQD]
,[/CPMB/WADBQQD
PARENTH1].[2013.Q2                         /CPMB/WADBQQD]
,[/CPMB/WADBQQD                 PARENTH1].[2013.Q3                         /CPMB/WADBQQD]
,[/CPMB/WADBQQD
PARENTH1].[2013.Q4                         /CPMB/WADBQQD]
,[/CPMB/WADBQQD
PARENTH1].[2013.TOTAL                      /CPMB/WADBQQD] } * {[/CPMB/WADNXJI                 PARENTH2].[RE_ALAE_RATIO]
,[/CPMB/WADNXJI
PARENTH2].[RE_ALL_RATIOS                   /CPMB/WADNXJI] ,[/CPMB/WADNXJI                 PARENTH2].[RE_COMBINED_RATIO]
,[/CPMB/WADNXJI
PARENTH2].[RE_EXPCOMM_RATIO] ,[/CPMB/WADNXJI                 PARENTH2].[RE_LOSS_RATIO]
,[/CPMB/WADNXJI
PARENTH2].[RE_OTHERCOMM_RATIO] ,[/CPMB/WADNXJI                 PARENTH2].[RE_STAT_COMB_RATIO]
,[/CPMB/WADNXJI
PARENTH2].[RE_STAT_EXP_RATIO] ,[/CPMB/WADNXJI                 PARENTH2].[RE_TOT_EXP_RATIO]
,[/CPMB/WADNXJI
PARENTH2].[RE_TOT_LOSS_RATIO] ,[/CPMB/WADNXJI                 PARENTH2].[RE_ULAE_RATIO] } ON
0 from
[/CPMB/WAMSZKS/!!O/CPMB/WAMSZKS]
WHERE ( [Measures].[PERIODIC] ,[/CPMB/WAD3OFZ                 PARENTH1].[ACTUAL]
,[/CPMB/WAD0VHV
PARENTH1].[ALL_CHANNELS                    /CPMB/WAD0VHV] ,[/CPMB/WAD021F                 PARENTH1].[LEGAL                           /CPMB/WAD021F]
,[/CPMB/WADME7W                 PARENTH1].[ALL_DATASRC                     /CPMB/WADME7W]
,[/CPMB/WAD0DZ0
PARENTH1].[FGI
/CPMB/WAD0DZ0] )
V1:Value RE_IREV /CPMB/WADNXJI for characteristic /CP
V2:MB/WADNXJI unknown
V3:
V4:
Thanks,
Senoy

Hello Vadim,
Thanks for the reply.
I am able to process ACCOUNT_GL dimension.
Also, I am using standard TIME dimension.
I found that the virtual provider(created by using source of data for my model) too is showing the error, when I place above member formula.
I am attaching the error messae when I try to do list records in the virtual provider.
When I remove the member formula, everything is fine
Thanks

@ATTRIBUTESVAL works properly in Calc script but not in Member Formula.

We are using Essbase 11.1.2 –
"Global_Period" is a Dynamic Calc Member. Below is its Member Formula:
"ProjType " is an attribute (text) dimension.
"Global_Period" ="ValidAccount";
IF (@ISLEV ("Total_Expenses", 0) AND @ISMBR("HSP_InputValue") AND @ISLEV ("Version",0) AND
@ISMBR("No_GL_Account") AND @ISLEV ("Scenario",0) AND @ISLEV ("Years",0) AND @ISMBR ("Local")
AND @ISLEV("Tot_Org",0) AND NOT @ISIDesc ("Service_Division") AND @ISLEV("Tot_PRJ",0) )
"Global_Period"->"No_GL_Account"-> @CURRMBR ("Projects") =
1* "ValidAccount"->"Global_Version" ->"Global_Scenario"->&Budget_Year->"Global_Entity"->
"No_GL_Account"->"HSP_InputValue"->"Local"->
@MEMBER(@NAME(@CONCATENATE ("Proj_",@ATTRIBUTESVAL("ProjType"))));
ENDIF
The above Member- Formula is failed to work when opening a Data Form that contain "Global_Period".
The error messages in the log file are as follow:
[Thu Mar 1 16:55:39 2012]Local/Projects/Plan1/admin@Native Directory/1122748736/Error(1200370)
Error executing formula for [Global_Period] (line 1): attempt to cross a null member in function [@X]
[Thu Mar 1 16:55:39 2012]Local/Projects/Plan1/admin@Native Directory/1122748736/Error(1200370)
Error executing formula for [Global_Period] (line 0): attempt to cross a null member in function [@_VAL]
When converting the "Global_Period" to be a Store member.
The Calc Script below is exactly equivalent to the Formula, and run perfectly with no Errors.
"Global_Period" ="ValidAccount";
FIX ("HSP_InputValue", "Local","No_GL_Account", @RELATIVE ("Total_Expenses", 0),
@RELATIVE ("Version",0), @RELATIVE("Scenario",0), @RELATIVE ("Years",0),
@REMOVE (@RELATIVE ("Tot_Org",0),@IDESCENDANTS ("Service_Division")),
@RELATIVE ("Tot_PRJ",0))
SET CREATENONMISSINGBLK ON;
"Global_Period"
("Global_Period"->"No_GL_Account" -> @CURRMBR ("Projects")=
1* "ValidAccount"->"Global_Version" ->"Global_Scenario"->&Budget_Year->
"Global_Entity"->"No_GL_Account"->"HSP_InputValue"->"Local"->
@MEMBER(@NAME(@CONCATENATE ("Proj_",@ATTRIBUTESVAL("ProjType"))));
SET CREATENONMISSINGBLK OFF;
ENDFIX
For many reasons we prefer to use the Dynamic Calc Formula for "Global_Period".
As result of some checking I discover that the problem is with the function @ATTRIBUTESVAL,
because the formula has worked fine when I replace the @ATTRIBUTESVAL with a string.
Please help, what is the right way to write the formula in order to make it work.
Thanks
Tami Kedem

Dear Cameron Lackpour,
Thank you very much, for your reply.
I'd given it a try, but it didn't help.
The purpose of this formula is as follow:
We holds 1's (ones) for allowable combinations of "Project_Type and Accounts", namely, each project type has different list of accounts that are allowed for input.
I need to populate the input 1's to all projects (and their children) according to its "ProjType".
The Data forms has periods in columns, thus by putting "Global_Period" (Hide) as the first column, and use "Suppress Missing rows" - for each project (on the "Page") , the form will show just the allowable Accounts in rows.
(we have around 300 Accounts, 50,000 members in Project dimension and around 25 Types of projects).
Please help.
Thanks!
Regards,
Tami Kedem

How to use local variable in member formula?

Hi Expert,
We would like to use a {local variable} in a member formula, so that it can pick up the prompt from webform upon save. Would like to know if it is possible to do? If so, what is the correct syntax?
We attempted to use brace {scenario}, blacket [scenario], blacket with quote ["scenario"]. None of these work.
We are using 11.1.2.1 version, EPMA, Hyperion Planning.
Thanks in advance for your help!

One other pointer. Where did you define your variable? Hopefully you went into Calc Manager and selected <Tools>, <Variables>. From there, navigate to your application or database. Right-click on your application or database and select "New". In the bottom panel, you'll need to select your Variable Type. Make sure you select "Member", and not "Members". You cannot pass "Members" (plural) to a web input form. Also, if you want to define a variable for a custom dimension, you'll need to do it at the database level. Standard dimension member variables can be defined at the app level. (Not sure why this is the case, especially when my custom dimension exists in all plan types . . . . )
Anyway, hope this helps,
- Jake

Block creation problem in member formula

Hi,
I have a member formula as below :
IF(.....)
x = a/b;
ENDIF
where a,b have their own member formulas.
There is no issue with the calculations of x,a or b, but I am facing an issue with block creation of x.
Is there a way to handle block creation through member formulas? I know the way out through calc scripts, but i am trying to limit the use of calc scripts.
Thanks!
Note:The storage property of all three members is store. Also, a and b lie in the same intersection (same block), and x lies in another intersection.

In the following section of the dbag: http://docs.oracle.com/cd/E12825_01/epm.111/esb_dbag/frameset.htm?dcaoptcs.htm...
Under the sub-section: In Equations in a Dense Dimension...
It states as follows:
In Equations in a Dense Dimension
When you use a cross-dimensional operator in an equation in a dense dimension, Essbase does not automatically create the required blocks if both of these conditions apply:
Resultant values are from a dense dimension.
The operand or operands are from a sparse dimension.
You can use the following techniques to create the blocks and avoid the performance issue.
Ensure that the results members are from a sparse dimension, not from a dense dimension. In this example, the results member Budget is from a sparse dimension:
FIX(Sales)
Budget = Actual * 1.1;
ENDFIX
FIX(Expenses)
Budget = Actual * .95;
ENDFIX
Use the DATACOPY calculation command to create and then calculate the required blocks. See Using DATACOPY to Copy Existing Blocks.
Use a member formula that contains the dense member equations:
FIX(Sales, Expenses)
Budget (Sales = Sales -> Actual 1.1;*
Expenses = Expenses -> Actual .95;)*
ENDFIX
The phrasing of that last part would lead me to believe that block creation via a member formula is possible. Though I'm not sure of the member to which that formula should be applied. Furthermore, the code looks funky in that we're fixing on Sales and fixing on Expenses, and them on the left side of the equation within the fix.
Thoughts anyone?

Need help in member formula

Hi All,
i need a help in memberformula
i've two sparce dimenions as below:
Dim1:
A
--B
--C
Dim2:
a
---b
---c
d
---e
---f
i need to write member formula on C from Dim1 if member is parent level member from dim2 then its to sum up with its childen values against B from dim1.
If member is parent level memer from dim2 ex:d
C->d = B->e + B->f
Thanks in advance,
Kiran
Edited by: kirannch on Oct 16, 2012 4:16 PM

Hi Tim,
Thanks for your response.
I'm using all HFM dimensions in Essbase Except Cust2 and Cust4.
In my outline Account, Period and Year are dense dimensions and rest are Sparse.
i'm comparing the data at parenttot with usdtot, contr as we are using flat members.
Below script is not updating any parent level value of USDTOT combination. i'm running the aggregation with exclude elim data before executing this calc script.
USDTOT,Contr are sparse dimension members and Entity also sparse.
Please can you help on the below scripts.
SET CALCPARALLEL 3;
SET AGGMISSG OFF;
SET FRMLBOTTOMUP OFF;
SET CACHE HIGH;
SET LOCKBLOCK HIGH;
EXCLUDE ( "Elim")
/Calculation "USDTOT" at Parent level of Entity Dimension with sum of children same parent entity with Contr member */
SET UPDATECALC OFF;
FIX("ACT","FY12")
"USDTOT"(
IF(NOT @ISLEV("ENTITY", 0));
"USDTOT" = @SUM(@CHILDREN(@CURRMBR("ENTITY"->"Contr")));
ENDIF;);
ENDFIX;
ENDEXCLUDE;
Thanks in advance,
Kiran
Edited by: kirannch on Oct 24, 2012 7:38 PM

IF ELSE Statement in Member Formula

I believe that I am in my final step of completing my database. But, I need to create a member formula that converts lbs to kg. I have gotten help on this question in the past and have a basic formula that works. However, I have 2 exceptions to the formula that are not successfully calculating.
This much of the formula has been tested and works when isolated:
IF (@ISMBR(@LIST(AccountCapacityTypeX,AccountCapacityTypeY,AccountCapacityTypeZ)))
"LBS"/2.2046;
ELSEIF ((@ISMBR(@List(AccountCapacityTypeA, AccountCapacityTypeB) )) and (@ISMBR(@LIST(MbrNm1, MbrNm2,"Jan","Feb","Mar","Apr","May","Jun","Jul","Aug","Sep","Oct","Nov","Dec","Qtr1","Qtr2","Qtr3","Qtr4"))))
@round(("LBS"/2.2046),0);
else
@round(("LBS"/(2.2046*5)),0)*5;
ENDIF
However, the following checks out when I verify my syntax, but when it is added to the above formula the formula does not load:
IF ((@ismbr(MbrNm3)) and
(@ISMBR(@LIST("Region1","ParentOfRegion1","GrandparentOfRegion1","Y2008","Y2009","Y2010","Y2011","Y2012","Y2013","Y2014","2015","Y2016","Y2017","Y2018")) and (@ISMBR(@List(AccountCapacityTypeA, AccountCapacityTypeB)))))
105;
ENDIF
IF ((@ismbr(MbrNm4)) and
(@ISMBR(@LIST("Region1","ParentOfRegion1","GrandparentOfRegion1","Y2012","Y2013","Y2014","Y2015","Y2016","Y2017","Y2018")) and (@ISMBR(@List(AccountCapacityTypeA, AccountCapacityTypeB)))))
425;
ENDIF
Members MbrNm1-4 are all stored, zero level members of the same dimension. My years, months, and qtrs are dense dimensions, everything else is sparce. AccountCapacityTypes contain both calculated and stored members. Region dimension contains all stored members. Also lbs are a stored member.
Any ideas on how to make these 2 exceptions work?
Thank you,
C-Lo

Hello Cameron Lackpour,
I have tried several iterations of this calc script, and gotten it to mostly work. The issue that I have is that it calculates everything correctly, but when I @remove the one year that want the calc script to calculate differently that year retrieves values for #missing as desired, but when I try to write a calc script for that single excluded year the second calc script still doesn't run for the whole condition that is defined. I don't know if any of that makes any since, but below is an example:
FIX("JOLEFINS_JCP")
FIX(@REMOVE(@RELATIVE("Years", 0), @Member("Y2008")))
*"KMT"*
IF (@ismbr(@list("MajorTurnarounds","InventoryCtrl","Feedslate/ProdMixImpct","ActsOfNat","Fdstk/RawMtlAvail",
*"OtherExtEvents","ExternalLPOs","InternalLPOs","PlndMntc","Mech/ProcLoss","AbvCapProd","Other","Actual","Adjusted","MaxDmstdCap")))*
*"MMLBS"/2.2046;*
ELSEIF(@ISMBR("Published Capacities","EOY_PubCap"))
*@round(("MMLBS"/(2.2046*5)),0)*5-1.25;*
ENDIF
ENDFIX (everything in bold is calculating correctly)
FIX (@RELATIVE("Years", 0), @member("2008"))
+"KMT"+
+(+
IF (@ismbr(@list("MajorTurnarounds","InventoryCtrl","Feedslate/ProdMixImpct","ActsOfNat","Fdstk/RawMtlAvail",
+"OtherExtEvents","ExternalLPOs","InternalLPOs","PlndMntc","Mech/ProcLoss","AbvCapProd","Other","Actual","Adjusted","MaxDmstdCap")))+
+"MMLBS"/2.2046;+
ENDIF
IF(@ISMBR("Published Capacities"))
+@round(("MMLBS"/2.2046),0)/1.08;+
ENDIF This portion in italics returns #Missing . However, the loaded data ("MMLBS") does return data for this year.
IF (@ISMBR("EOY_PubCap"))
*8.75;*
ENDIF This portion seems to be calculating as well.
ENDFIX
ENDFIX
CALC ALL;
Any additional suggestions?
Thanks,
C-Lo

Member formula restriction problem

I have made a customized form in Capex the layout of the form is that on row side i have Line Item dimension with 5 members and their parent and on coloumn side i have account dimension with 7 members selected.
I am using a member formula on the parent of the line item member on row side and in that member formula i have restricted one of the 7 account dimension member on the column with the help of IF statement. My problem is that if i dont use that if statment the member formula works fine but it also works on the other 6 members of the account dimension (on column) and if i use the IF statment then the member fornmula does not work at all.
My requirement is that the member formula should work on the combination of that 1 member of account dimension and parent of line item on row side.
Can anybody help me with that?

Hi Nilanjan,
1) all the members are in the same hierarchy (in fact, there is only one hierarchy)
2) all these members come from different branches of the hierarchy, they are not siblings, some are parents of others, however.
The values I specified are real values which I actually get when putting the accounts in an EVDRE report. Therefore, separately in EVDRE I see the calculated value 6 for account A and the fixed value 1 for account C. So, I expect to see also the value 1 for the account B and instead I see 2 meaning that for BPC 6 <= 1.
That is why I assume that BPC does not recalculate the account A used in the account B. And that is why I assume that solve_order is the problem. And I can not make this solve_order work in any way. What are the rules of SolveOrder's usage?
Thanks for help.
Valera

How to have a member formula to reference a text data type member?

Hi there
I am just wondering how do you use a member formula to grab the text in a text data type member?
Our situation is that we have a text data type member in the Accounts dimension (called Project Manager). This is a free text field users can input a project manager's name. However, for our reporting purposes we want to report the Project Manager next to a list of Accounts (i.e. in the same row). The way we have tried to achieve this is to create dynamic calc text data type members in the Version dimension that simply refer to the Project Manager account using the reference function (->).
Although this works, when we run a report we get a number (assuming this is just the reference ID to the RDBMS field) instead of the actual name. We have set the dynamic calc member to text data type as well. We are using a planning connection as well.
Does anyone know how to make this work?
Thanks

Are you talking about FR reports, does it display the text if you reference the original member using a planning connection, if it does then it probably looks like you can't do it using the method you are trying as it is an essbase formula and in theory it will just return a number.
Cheers
John
http://john-goodwin.blogspot.com

Error: Invalid dimension member with special character / in BPC NW 7.5 SP7

Hi experts,
We are encountering the following problem in our Financial Planning application.
We are migrating our existing BPC solution from one server to another through backup and restore. The existing solution was on BPC NW 7.5 SP 5. The profit_centre dimension in the existing solutions has several member ids with special character '/' (forward slash). The dimension never threw an error when processed in the existing solution and there is planning transactional data against these member ids.
While the entire configration , appset , files were successfully restored through UJBR on the new system (BPC 7.5 SP7) through UJBR (backup and restore), the masterdata could not be restored only for this Profit_centre (masterdata for other dimensions were processed successfullu). All the member ids with / are rejected for this dimension. The same error is thrown if processed through the admin client from the member sheet.
Error: Dimension member PC_FF/WS/NT is an invalid member ID
Error in Admin module
Is there any setting which need to be made to allow / character in member ids? Any suggestion to get around this problem would be much appreciated.
Thanks
Abhiman

Hi Abhiman,
Yes, you need to maintain the transformation file to correct all dimension member IDs. Can you please refer to the following link with a similar issue:
conversion file formula not working
Hope this helps.
Rgds,
Poonam

Dimension member formulas

Similar Messages

Maybe you are looking for