Dimension's default selection

How can I change the dimension's default selection? For example, if I select any measure in query builder and press "Ok", it will ask me for applying of default selection and makes it as "First 1 all levels". How can I control this default selection?

This is the default because it ensure only a small
dataset is returned.I see it. It's a good default decision, but only default. I wish to control separately defaults for dimensions as specified by customers - for example, set 'last six monthes' as default for all time dimensions.
As a fact, customer said: "I mean <this> if I make no explicit selection" - and I should realize this.
If necessary you can modify this behaviour within
an end user application by creating your own hooks
using the various API calls.That's exactly what I need. Can you render concrete these 'various calls' please?

Similar Messages

How to Display key/text in default selection screen?

HI Gururs,
I want to display key/text in variable default selection screen in BI Analyzer in Quality.
please give me any suggestions to resolve this.
Thanks
vadlamudi

hi,
What i have done is in the cube level, in the dimensions i have made specific properties and set to key/text in development, so its working fine in development of the analyzer, but still its showing text only in quality analyzer.
please give me the solutions if you know any.
regards
vadlamudi

No dimensions available for selection in Query Wizard

Good afternoon. I have created some presentations in JDeveloper and am quite happy with the results thus far. However, I recently began working with Reports and have stumbled across an error for which I may be responsible.
I had no problems whatsoever in JDeveloper. When trying to create a query in Reports, there are no dimensions available for selection, only measures. I researched this somewhat and ran across the statement in the OLAP API docs that states the creation of 'measure folders' in the OLAP DB is necessary in order for that information to become avaiable elsewhere.
I believe this hypothesis is correct because (please ocrrect me if I am wrong) JDeveloper uses JDBC to connect with OLAP by default. However, I believe that Reports uses the OLAP API.
The reason I am not 100% certain that this is the culprit, is the fact that I am still able to see the measures; just that when I select the measures, there are no dimensions associated with them (which thereby prohibits me from proceeding in setting up the query).
Has anyone else seen this behavior, and is it caused by not having measure folders setup? Thanks.
-Jeff Trudeau

Np. I am running the 9.0.3.4 maintenance release of JDeveloper and the corresponding release of BIBeans. As for Reports, I am running the version that was included with the latest 9i Developer Suite (release 2). I am not aware that a more recent version of Reports has been released.
I am running a 9i database with the latest patches. Again, JDeveloper with BIBeans is working fine, but the problem lies in setting up a query in Reports. Thanks for the help.
-Jeff

How can I pre-define the default selection in a SelectOneChoice?

How can I pre-define the default selection in a SelectOneChoice?
(1) Here's my JSF-code:
<af:selectOneChoice label="#{res['usercreate.input.sex']}"
value="#{bindings.Sex.inputValue}"
binding="#{SelectListBean.sexlist}"
readOnly="false" autoSubmit="false">
<af:selectItem label="#{res['data.sex.women']}" value="1"/>
<af:selectItem label="#{res['data.sex.man']}" value="2"/>
</af:selectOneChoice>
(2): manged bean: to set the default value to be the first in the list, my managed bean as follows:
import oracle.adf.view.faces.component.core.input.CoreSelectOneChoice;
public class MBSListBean {
private CoreSelectOneChoice sexlist;
public MBSListBean() {
public void setSexlist(CoreSelectOneChoice sexlist) {
this.sexlist = sexlist;
this.sexlist.setValue(1);
public CoreSelectOneChoice getSexlist() {
return sexlist;
(3) when i launch the page, it often gives me such warnings:
WARNUNG: Could not find selected item matching value "1" in CoreSelectOneChoice[UIXEditableFacesBeanImpl, id=_id7]
how to solve the problem ?
Thanks,
wzzdx

You could also set the default on your entity or viewobject, in the properties of your attribute.

How to hide some fields in default selection screen in hr abap

Hi experts,
I have created default selection screen,in that in the Period option I wants display only 'Today'.
And in the selection criteria i wants to display personnel number,companycode,personnelsubarea,employee status and instead of payroll area i wants to display 'Org unit'.please tell me step by step procedure,that could be greate helpfull.
Thanks in advance,
mohan

use this logic to display only today in the period option
**Local constants
   CONSTANTS:
          c_0                   VALUE '0' ,
          c_089     TYPE char3 VALUE '089',
          c_091     TYPE char3 VALUE '091',
          c_095     TYPE char3 VALUE '095',
          c_097     TYPE char3 VALUE '097'.
                 At Selection Screen
at selection-screen output.
LOOP AT screen.
      IF
           screen-group4 = c_089 OR
           screen-group4 = c_091 OR
           screen-group4 = c_095 OR
           screen-group4 = c_097 .
      screen-active = c_0.
      MODIFY SCREEN.
     ENDIF.
ENDLOOP.

How to change default selection in compensation planning

Hi experts,
We have upgraded our portal to EHP1 sp04.
I need to change the default selection which it currently shows in "Employee Selection" under
Compensation Planning-->Compensation Planning.
When a user clicks on Compensation Planning>Compensation PLanning> he comes in an iview with 4 steps:
There is one "Employee Selection" scroll down view, I need the default to be "Direct Reports"
http://rapidshare.com/files/308150359/DirectReports.jpg
The default it shows is "Employees from organizational units", I need to change it to "Direct reports". Can someone tell me how I should proceed about it.
Please guide me
Regards,
Rajat Sharma

Hi,
I have solved this issue.
Go into SPRO>integration with other sap system>business packages>mysaperp>organizational structure view
group organizational structure view.
select mss_ecm_sel and change the nos. accordingly.
thanks,
Rajat

Logical database EQI (equipment) .. I dont want to use the default selecti

i am using Logical database EQI (equipment) its realated to PM module.....
i dont want to use the default selection screen.
instead i want to process my own selection screen inputs..
(ie..) i want to fetch the data using the GET event using my own selection screen inputs.
my selection screen inputs is   equipmentnumber (equnr)
and the output list : 1.equnr      "equipment number
                              2.shtxt       "Equipment Description
                              3.tplnr        "Functional Location
                              4.pltxt        "Functional Location Description
                              5.qmnum    "Notification Number
                              6.qmtxt      "Notification Description
             and so on ..........
how to do this ... can any one give sample code... or logic

Hi Victor,
I have a simple solution for this.i think it will help you.Do u have any idea about query designer in SAP.
by using it we can satisfy u r reuqirement.follow the below steps.
1)Go to SQ01
2)In the screen click on QuickViewer option.then you will go to another screen.
3)In that screen give any name starting with 'Z' in the QuickView box and then click on create.
4)In the dialogbox enter title and comments and then select LogicalDatabase as the DATASOURCE and give DataSourceLogicalDatabase as EQI.check the radio button Basis Mode and then click on ok.
5)then on the screen in the first half of leftside you will get another screen with the columns DATAFIELDS,LISTFIELDS,SELECTIONFIELDS,TECHNICALNAME.
6)In the DATAFIELDS column expand the tree,then u can see the fields what we have,and what you want.and also you can see the check boxes in front of the columns LISTFIELDS,SELECTIONFIELDS.
7)LISTFIELDS means the output fields,SELECTIONFIELDS means the selection screen fields(equnr).
check the checkboxes as per u r requirement and click on execute.
8)then a progam will be created.to know the program name after executing the program GO TO
SYSTEM->STATUS.then u can see the program name there.
If u know all these,let me know so that i can try for another solution.
Thanks,
N.K.C

How to change the text in default selection screen

Hi,
I have created the default selection screen(using PNP Logical database) ,In that I wants to display 'Data Selection Period' instead of 'Period'.
Please send me the related code.
Thanks in advace
mohan

HR Logical Database is PNP
Main Functions of the logical database PNP:
Standard Selection screen
Data Retrieval
Authorization check
To use logical database PNP in your program, specify in your program attributes.
Standard Selection Screen
Date selection
Date selection delimits the time period for which data is evaluated. GET PERNR retrieves all records of the relevant infotypes from the database. When you enter a date selection period, the PROVIDE loop retrieves the infotype records whose validity period overlaps with at least one day of this period.
Person selection
Person selection is the 'true' selection of choosing a group of employees for whom the report is to run.
Sorting Data·
The standard sort sequence lists personnel numbers in ascending order.
· SORT function allows you to sort the report data otherwise. All the sorting fields are from infotype 0001.
Report Class
· You can suppress input fields which are not used on the selection screen by assigning a report class to your program.
· If SAP standard delivered report classes do not satisfy your requirements, you can create your own report class through the IMG.
regards
vinod

Hiding some fields in default selection screen in hr abap created by pernr

Hi experts,
I have created default selection screen,in that in the Period option I wants display only 'Today'.
And in the selection criteria i wants to display personnel number,companycode,personnelsubarea,employee status and instead of payroll area i wants to display 'Org unit'.please tell me step by step procedure,that could be greate helpfull.
Thanks in advance,
mohan

hi mohan,
try this
   **Local constants
   CONSTANTS:
          c_0                   VALUE '0' ,
          c_089     TYPE char3 VALUE '089',
          c_091     TYPE char3 VALUE '091',
          c_095     TYPE char3 VALUE '095',
          c_097     TYPE char3 VALUE '097'.
                 At Selection Screen
at selection-screen output.
LOOP AT screen.
      IF
           screen-group4 = c_089 OR
           screen-group4 = c_091 OR
           screen-group4 = c_095 OR
           screen-group4 = c_097 .
      screen-active = c_0.
      MODIFY SCREEN.
     ENDIF.
ENDLOOP.

Input box on default selection screen

Hi,
how to create an input box on the default selection screen which will accept only 1275 characters.
Can u please help me?
Thanks in Advance,
Sreekala.

Hi Sreekala,
You need to use the CL_GUI_TEXTEDIT for creating the box, also you need use the dialog program for that.
For more info on that class check this
Usage of CL_GUI_TEXTEDIT
Text box on selection screen
Hope they helps you.
Regards!

How to set the default selection to "Select All" in a Multi valued parameter in SSRS 2008?

Hello Everyone,
How to set the default selection to "Select All" in a Multi valued parameter in SSRS 2008?
Regards
Gautam S
Regards

You need to specify "Default Values" in the report parameter property. Choose similar option used in the "Available Values" option, this will allow the parameter to check "Select All".
Regards, RSingh

How to get the dimensions of the selected cell in java client

hi,
I am able to retrieve the value of a particular cell using the data access package.i want to know how can i get the measure and dimension of a particular cell in java client.is it possible to get the row and edge of the selected cell?please help me in this.
thanks and regards
S.Sharanya

hi,
I am able to get the value like 'RM00' of the dimension by using the method,
m_activeView.getModel().getDataAccess().getValueQDR(1,1,1).getDimMember(m_activeView.getModel().getDataAccess().getValueQDR(1,1,1).getDimensions().nextElement().toString()));
but this give all the values of the each dimension for each cell of the crosstab.but i want the values of dimension which is selected.i am able to get the selected dimension usind qdr method,for which i am getting the output like
MDM!MEASUREDIMENSION(MDM!D_DEMO1.RESIDUAL_DIM 'RM00', MDM!MEASUREDIMENSION 'MDM!M_DEMO1.PD_BR_RMT_LDRUN_CUBE.PBRL_SIM', MDM!D_DEMO1.PRODUCT_DIM 'G001', MDM!D_DEMO1.LOADRUN_DIM '3', MDM!D_DEMO1.BRANCH_DIM 'HO01')
i want to know the method so that i can get only values ,like RM00,G001,3,H001.is there any method,so that i can get all these value alone.pls help me.i am not able to proceed without this.
thanks
s.sharanya

How to get the default selection color from JTable

Hi, there,
I have a question for how to get the default selection color from JTable. I am currently implementing the customized table cell renderer, but I do want to set the selection color in the table exactly the same of default table cell renderer. The JTable.getSelectionBackgroup() did not works for me, it returned dark blue which made the text in the table unreadable. Anyone know how to get the window's default selection color?
Thanks,
-Jenny

The windows default selection color is dark blue. Try selecting any text on this page. The difference is that the text gets changed to a white font so you can actually see the text.
If you don't like the default colors that Java uses then use the UIManager to change the defaults. The following program shows all the properties controlled by the UIManager:
http://www.discoverteenergy.com/files/ShowUIDefaults.java
Any of the properties can be changed for the entire application by using:
UIManager.put( "propertyName", value );

How to set default selection in html:radio

hai
how to set default selection in <html:radio>.

No it won't help.
You can't set a value into an <input type="file"> control at all. The user has to put values in themselves.
The reason behind this is security. If the programmer could put any value they liked in there, you could upload any file at all from a users computer without their intervention. eg C:\windows\system32\passwords.txt
Bottom line: you can't put a default value into the input type="file" control.
And a good thing too ;-)

PDF as default selection for Select printing cotrol (for Web)

Hi
Can someone point me to righ direction? What we are trying to do is, in Infoview, set PDF as default selection for "Select printing Control (for Web)", so that each user does not have to do this in preferences in infoview.
Is it possible to do so? If yes, how?
Thank you
Regards
IMS

Take a look for a .vbs sample that synchs the ADMINISTRATOR preferences to all users on the BOE platform.
You can schedule this as a PROGRAM OBJECT in InfoView so that it runs on a regular schedule to apply the change to new users.

Dimension's default selection

Similar Messages

Maybe you are looking for