Direct Print Issue IN Crystal reports IN IE(8,9,10)

Hi All,
I am an software developer using Dot Net and I am facing an issue in direct print in crystal report viewer in IE and i tried many setting.

Dell is absolutely correct. However there is an issue with the CAB file for 'Crystal Reports Basic for Visual Studio 2008' (v. 10.5). The issue is documented in KBA: 2000455 - Unable to download the CR 10.5 PrintControl cab file. The KBA has not been yet replicated to SCN, so here is a copy of the content:
Symptom
Using Crystal Reports Basic for Visual Studio 2008 (V. 10.5.x)
When attempting to download the PrintControl.cab file the following errors are displayed:
A communication error occurred: "Operation timed out"
The Web Server man be down, too busy or experiencing other problems preventing it from responding to requests.
Internet Explorer cannot display the page
Environment
Crystal Reports Basic for Visual Studio 2008 (v. 10.5.x)
Visual Studio 2008
Cause
The published URL (http://support.businessobjects.com/CRforVS2008/PrintControl.cab) is now incorrect
Resolution
Use the following URL: http://resources.businessobjects.com/support/downloads/microsoft/vs_2008/printcontrol.cab
An alternative may be to use the Print PDF mode, though if memory serves right that was a cumbersome solution and is much better with CR 2008 (v. 12.x) and later.
- Ludek
Senior Support Engineer AGS Product Support, Global Support Center Canada
Follow us on Twitter

Similar Messages

Label Printing issues on Crystal Reports Server

I built a label that prints off beautifully on my local machine with Crystal XI installed. However, when I post the label to the reports server, and a user tries to print it off, it prints off two blank labels behind each good label. I have racked my brain on this for days. The printer settings are identical to my local machine. Any idea what might be causing this?

I think the following information might help you
Symptom
A label report was viewed over the web using the Web Component Server, and printed on a label maker printer DYMO 330. The labels were being resized to 8 1/2 x 11 instead of printing the size of the label. Even after selecting the correct size, the labels print one per page, followed by 3 blank labels.
When printing was done through a distributed report or the report designer, the labels printed to the correct size and only printed one label with no blank labels.
What is causing the label report to print incorrectly when printed from the web viewer?
Resolution
Steps to Resolve
1. Open the report in the Crystal Reports 8 designer on the web server.
2. Click on 'File' then click 'Printer Setup'. If a printer is already selected then set it to 'No Printer', click 'OK', then save the report.
3. Click on 'File' then click 'Printer Setup' again. Select the default printer and clear the 'Default Properties' checkbox.
4. Click 'OK' and save the report.
5. Click on Start > Settings > Control Panel > Services and double click 'Seagate Page Server' service. Set this service to run under an 'Administrator' account.
6. Stop and restart the service, and close down all browsers.
The label reports now will print successfully over the web.
Background
Incorrect printing from a web viewer can have several causes, including:
· The report is designed with a designated printer, but the encapsulated page format (EPF) files are being created in 'No Printer' mode.
· The server does not have access to the printer.
· A valid printer is not saved with the report on the server.
· The printer driver is not installed on the server.
Regards,
Raghavendra.G

Error print preview a crystal report

Hi,
I have an issue where i log in as a user with admin rights and try to print preview a crystal report that was created. It prompts me to log into the database, when i do this gives me a login incorrect oracle error. But when i log in as administrator i am able to do this.

Hi,
Additional Info:
CR 2008 SP3 is called by an application using .net. The Application passes a couple of parameters to the CR report. I'm able to preview the report. All the reports use the same set of parameters.
Balaji K

Print preview for crystal report

hi kings,
I have one problem . I Designed userform that form have print button when i press the print button the crystal report Open and show the data. but the report is not open when i press the button.Please any one help me out of this issue
the error Shows-Invalid index. (Exception from HRESULT: 0x8002000B (DISP_E_BADINDEX))
Dim oForm As SAPbouiCOM.Form
                    oForm = gonAppApplication.Forms.Item("Emr_NewNCMR")
                    Dim Docnum As String = ""
                    Docnum = oForm.Items.Item("txtDocNo").Specific.value
                    Dim cr As New CRAXDDRT.Report
                    Dim apcr As New CRAXDDRT.Application
                    Dim myCrystalReportViewer As CrystalActiveXReportViewerLib102.CrystalActiveXReportViewer
                    Dim RptDoc As New CrystalDecisions.CrystalReports.Engine.ReportDocument
                    RptDoc.Load(System.Windows.Forms.Application.StartupPath & "\Ncmr.rpt")
                    RptDoc.SetDatabaseLogon("sa", "Sa@123", gonComCompany.Server, gonComCompany.CompanyDB)
                    RptDoc.SetParameterValue("@Docnum", Docnum)
                    myCrystalReportViewer.rptViewer.ReportSource = RptDoc
                    myCrystalReportViewer.rptViewer.Refresh()
                    myCrystalReportViewer.ShowDialog()
thanks regards
B.lakshmi Narayanan

THANKS

Print Preview of crystal Report without add a document

Dear All,
Can i see the Print Preview of Crystal Report without add a document like PLD.
i have developed a Crystal Report through Add Command by Passing a query.
if anybody have idea on this issue please suggest me.
Thanks.
Shekhawat

Hi Shekhawat....
Through Query Crystal report it is not possible to view the Layout as Draft withou adding teh docs because Report fetch the details only when itys value goes to Database Table......
So suggest to use SAP standard CR and modify as you want....
Regards,
Rahul

Out of Memory issue in crystal report 2008 SP1

Hi ALL,
I am facing serious issue in crystal report 2008 SP1.
When i am click the page setup in crystal report 2008 ,it is prompting like "Out of Memory".
Because of this i am not able to see the default printer in the page setup.
Please give the suggestions to resolve this issue.
Thanks and Regards,
Vinay

Hi Ed,
What printer are you using as your default printer?
What happens if you change your default printer to Microsofts generic print driver? Only as a test to remove the printer being the cause.
Also, Go into Page Setup and check on Dissociate Printer..... and see if that fixes the issue.
Also, include all your OS version and patch level, Status of DEP, anti-virus turned off ( disconnect from your network while doing this test ) and Windows Firewall or any third party firewall and close all other software running.
Thanks again
Don

Need alternative for activex print control using Crystal reports 2008

I have created a .Net web application (2.0/3.5 .Net framework) with crystal reports 2008.
Reports are viewed using Crystal reports 2008 activex viewer.
On click of PRINT icon in activex viewer, activex print control download prompt will be displayed on client machine.
I need to avoid downloading of activex print control on client machine. Is there any other alternative or option to use print functionality in viewer without downloading activex print control on client machine?
Or Is there any other workaround for print functionality in Crystal reports 2008 Viewer without downloading activex print control?
Note: Activex print control download prompt will not be displayed when using Crystal reprots XI Release 2 version.
Thanks,
Jagannath

Does anyone know which files need to be registered for the ActiveX print control? We occasionally have users who somehow break their Crystal ActiveX controls, and they can no longer see the print options. In Crystal 10, I was able to fix these issues by pushing a package which registered several files on the user's computer.

Can't Print preview draft crystal report.

Print preview draft crystal report.
Error message:
One or more fields could not be found in the result set.
Use verify database to update the report. Error in file POR20009. Rowset column could not be found.
It occurs when trying to print (or preview) a DRAFT document with the report being a Crystal report. No problems when the document is NOT a draft. This happens on both SAP 8.8 PL16 and PL17.
Updating the report and saving it again (as suggested by the error message) does not fix the problem.
The DRAFT or u201CNORMALu201D document type uses the same Crystal report. Something seems to be different when passing parameters from a Draft report?
I can preview DRAFTS and NORMAL reports from the Crystal Editoru2019s preview pane. This is only happening when launching from within SAP.
Is this a bug?

Hi Maeve,
Can you please help by posting what exactly was the solution to this issue?
Thanks in advance.
Regards,
Sanil

Print Preview using crystal report in SAP B1 slow.

Dear all,
I face another problem. Print preview using crystal report in SAP B1 is very slow. Although i have create a query view in SQL server but it's still slow for my user. First time i create using table in crystal report. just drag the table. It's take more than 10 minutes. After that i move all the query to view in SQL server , it's take 1-2 minutes to print preview some time more.. But i think that it's still slow. Does any one know how to print preview fast. Just like in PLD.
Thanks in advance
bodhi86

Hello,
How do you answered to this question ?
Malika
Edited by: Malika Sanoune on May 13, 2011 1:48 PM

Can we add custom print button to crystal report launched using jsp

Hi,
I need to add a print icon in crystal report. My requirement states that I should not use the print button given in the taskbar of crystal report. Can this be done?
Thanks

Are you using Crystal Reports for Eclipse? If so, there is a new version out that suports Excel exporting:
/people/blair.wheadon/blog/2009/01/16/announcing-crystal-reports-for-eclipse-20

Print preview using crystal report in SAP B1 is very slow.

Dear all,
I face another problem. Print preview using crystal report in SAP B1 is very slow. Although i have create a layout in AR invoice form and applying the print sequences (ie 4 prints). Does any one know how to print preview fast. Just like in PLD.
Thanks in advance
Kamlesh Naware

Hi,
Basically Crystal report run with SQL statement, I would suggest to do well performance tuning on SQL query / Store Procedure.
Structure your query in DBA manner that will make some how faster such as use ( inner join, less condition,...)..
also if it simple query then use Command in Crystal report rather store Procedure..that make some how Faster your report.
Thanks
Kevin
Edited by: Kevin Shah on May 27, 2011 4:21 PM

Error when print out SAP Crystal Report in SAP B1

Dear all,
I have encountered the following message when I tried to print out SAP Crystal Report at client pc:
Could not load file or assembly 'CrystalDecision.Windows.Forms, Version = 12.0.2000.0, Culture=neutral, Publickey Token=692fbea5521e1304' or one of its dependencies. The system cannot find the file specified.
On the other hand, there's no error when I print out the SAP Crystal Report on server.
Can anyone advice on the error message as above?
Thanks alot.

Hi All,
I have SAP 2007 B,Visual Studio 2008 and Crystal report 2008 Add-on. I am facing the same problem,
"Could not load file or assembly 'CrystalDecision.Windows.form,Version=12.0.2000.0, Culture=neutral,Publickey Token =692fbea5521e1304' or one of its dependencies. The system can not find the file specified."
I have uninstalled SAP B1 and Crystal report 2008. Still I am getting the same Error message. Kindly give me your suggestions.
Regards,
Tom.

Text justification issue in crystal report

Hi,
I have MVC application with crystal report in it. I am exporting crystal report to PDF, everything except text justification (as we do in MS-Word) is not working. Even in crystal report viewer itself it's not working.
I have been trying since few days to solve text justification problem in CR. Well I have goggled a lot for this and found different available option to get the thing done. But that didn't solved my problem, I have read many replies on the crystal report discussion regarding the same but no result. I have tried four different versions of crystal report (13.0.5,13.0.6,13.0.9,13.0.13) as I found on the web that justify could work in these versions, but I was shocked when I didn't get anything useful.
For me it's like justify doesn't work in crystal report by any means. Can any one here tell me who has solved the text justification problem in crystal report. I have attached sample screen shot of word document where in I have specified my requirement of text justification.
Any positive reply would be highly appreciated.
-Sunny

Duplicate thread - Locked. Please continue discussion here:
Re: Text justification issue in crystal report
-Abhilash

InfoView not defaulting print settings from Crystal Reports XI

I have a form/report created from Crystal Reports XI published to InfoView that has the print settings set for the manual tray when printed. When running the report in InfoView, it does not default to the manual tray when printing. I am publishing directly from Crystal Reports. I have the Process/Print Setup 'Set layout to: Report file default' and the Schedule/Format 'Use options saved with report' checkbox checked. I am not finding any other settings to tell InfoView to use the report page layout/printer settings. Anyone know of any other options I should check? Thanks!
Edited by: Kelley Freelove on Oct 22, 2009 3:09 PM

That would be the correct forum as this one is for SDK issues only.
If you are not getting helped on the other BO forum you may want to consider creating a case if you have a valid support contract.
Jason

Print draft in Crystal report

Hi all,
I face a problem when printing draft document via crystal report.
when i try to print preview for non draft document , it runs well
But the problem is when i print preview in draft mode.
I use store procedure in sql.
my query is like this.
Create PROCEDURE [dbo].[Form_PO]
@Dockey numeric(19,6),
@ObjectId Numeric(19,6)
AS
BEGIN
IF @ObjectId = 22
BEGIN
          SELECT
                    --'ND' [DocuTipe],
                    a.DocEntry,
                    a.DocNum [PO NO],
                    a.NumAtCard [Reff Number],
                    a.DocDate [Document Date],
                    a.DocDueDate [Delivery Date],
                    a.TaxDate ,
                    a.CardCode [CardCode],
                    a.CardName [CardName],
                    a.Address2,
                    c.PymntGroup   [Payment Terms],
                    a.Comments [Remark],
                    a.DocCur [Currency],
                    b.ItemCode [ItemCode],
                    b.Dscription,
                    a.DocType [TypeDoc],
                    e.TrnspName [Incoterms],
                    b.Quantity,
                    b.Price [Price],
                    b.LineTotal [Amount],
                     a.DocTotal [AmountTotal],
                    d.Phone1 [Telp],
                    d.Fax [Fax],
               FROM OPOR a
                    INNER JOIN POR1 b ON a.docentry = b.docentry
                    INNER JOIN OCTG c ON a.GroupNum = c.GroupNum
                    INNER JOIN OCRD d ON a.CardCode = d.CardCode
                    LEFT JOIN OSHP e ON a.TrnspCode = e.TrnspCode
               where a.DocEntry = @Dockey
END
IF @ObjectId = 112
BEGIN
          SELECT
                    'DR' [DocuTipe],
                    a.DocEntry,
                    a.DocNum [PO NO],
                    a.NumAtCard [Reff Number],
                    a.DocDate [Document Date],
                    a.DocDueDate [Delivery Date],
                    a.TaxDate ,
                    a.CardCode[CardCode],
                    a.CardName[CardName],
                    a.Address2,
                    c.PymntGroup   [Payment Terms],
                    a.Comments [Remark],
                    a.DocCur [Currency],
                    b.ItemCode [ItemCode],
                    b.Dscription,
                    a.DocType [TypeDoc],
                    e.TrnspName [Incoterms],
                    b.Quantity,
                    b.Price [Price],
                    b.LineTotal [Amount],
                     a.DocTotal [AmountTotal],
                    d.Phone1 [Telp],
                    d.Fax [Fax],
               FROM ODRF a
                    INNER JOIN DRF1 b ON a.docentry = b.docentry
                    INNER JOIN OCTG c ON a.GroupNum = c.GroupNum
                    INNER JOIN OCRD d ON a.CardCode = d.CardCode
                    LEFT JOIN OSHP e ON a.TrnspCode = e.TrnspCode
               where a.DocEntry   = @Dockey
               and a.ObjType = 22
          END
END
So when i print draft document the objectId is 112 and will select the odrf table.
The issue is when print draft there is no data, but actually there are data in the odrf.
Is there any problem with my query ?
Regards
Jia shun

Hi,
To print draft document using stored procedure , use base document object type instead of 112.
for e.g. if you want to print purchase order draft set condition as Objtype ='22' instead if 112. It will fetch data.
Thanks,
Neetu

Direct Print Issue IN Crystal reports IN IE(8,9,10)

Similar Messages

Maybe you are looking for