Directory monitoring - unreadable directory?
Hi,
this may be related to my previous question.
I want to use directory monitor to watch /var/core on all systems.
I set up an Instance to do this in the appropriate module, but
in fact it's not working because /var/core is unreadable under normal circumstances:
# ls -la /var/core/
total 13
drwx------ 2 root root 2 Feb 21 10:19 .
drwxr-xr-x 42 root sys 42 Feb 22 10:08 ..
Without changing any permissions or ownership on /var/core, what is the procedure to allow SMC to watch this
directory and read into it?
Sorry for all the questions. We are doing a major deployment of SMC and relying on it for critical
systems and need to come up to speed quickly - we are working through many of our issues and
this forum has been extremely helpful.
rachel
Hi Rachel,
virag064 wrote:
I created an instance of Dirsize monitor with an Instance Name "core dumps".
I set it to alarm me if the dirsize is greater than 8192kb (ie a core dump).
I just ran gcore against a process to create a core dump and it exceeded the alarm rate.
So then I saw the field light up in Yellow (it didn't do this before, so I must've mis-set something previously).
But when I select the instance and do a Probe and select "Recursively list files" i(to return a file list) it
returns with:
/var/core:
total 2
/var/core: Permission deniedThat is why I am wondering if I have security not set properly - if it runs as root, it should be able to browse the directory
from a probe?Ah... although SunMC runs as root... so it can monitor that directory properly and send alarms (as you have seen)... many of the probe commands are configured to run as "nobody". As a security feature lots of the probes that show directory/file listings don't run as root... so you can't go poking around and see things you're not supposed to as a SunMC admin.
It probably wouldn't be hard to change that behavior (likely a single-line change in the Directory Monitor config file)... but be aware it would allow anybody in the SunMC "esadm" group to look at the contents of every directory on that Agent (i.e. you couldn't easily allow people to only look in /var/core... it would apply to any directory you were monitoring).
[email protected]
http://www.HalcyonInc.com
New !! : http://forums.HalcyonInc.com !!
Similar Messages
-
Please Help. How can you monitor a directory using jndi connection to a ldap server?
How can you monitor a directory using jndi connection to a ldap server? I
want the ldap server to monitor the content change in a file system
directory on another computer on the network. Can someone please help.
Thanks
FredHi,
Why do you want to use LDAP for Hard disk monitoring..???
U can do this by creating a MD5 checksum for all the files existing in some
perticular
directory and every hour or any configurable period u can recalculate the
checksum
to find out the change in the content.
I guess all u need is to get the code for "updatedb" utility of Linux and
instrument it for ur needs..
Hope it helps...
-aseem
mr wrote:
How can you monitor a directory using jndi connection to a ldap server? I
want the ldap server to monitor the content change in a file system
directory on another computer on the network. Can someone please help.
Thanks
Fred -
Directory monitor in Java, help
Hey everyone,
I'm attempting to write a directory monitor in java but I'm stuck. I'm trying to find something in Java that is like FileSystemWatcher in .NET but I don't think java does. From what I read is that you have to continually poll the directory for changes. What I would like to know is that are there any events and/or signals raised when a changes are made so that one could catch and process them? If not, could someone explain how to simply poll the directory for changes?
Thanks
Barefootbarefootsanders wrote:
This is exactly what I need to do. Now, i already have been working on the last modified time comparison which is relatively simple. What I was stuck on was finding what was different between the two file lists. Would I have to iterate through the entirety of the list and compare each item to find what was different or is there a more efficient way of doing this?The simplest thing to do would be to use Collection's removeAll method to get the difference between the two. This will show you which files have been added (using newList.removeAll(oldList)) and which have been removed (using oldList.removeAll(newList)).
A few notes:
* removeAll modifies the collection on which you call it, so you'll need to make copies.
* File's equals method docs say: Returns true if and only if the argument is not null and is an abstract pathname that denotes the same file or directory as this abstract pathname. Whether or not two abstract pathnames are equal depends upon the underlying system. On UNIX systems, alphabetic case is significant in comparing pathnames; on Microsoft Windows systems it is not.
So you'll need to decide if that's good enough, or if you want to implement your own comparison for files. Also, it's not clear from the above how shortcuts or symbolic links are handled--whether the shortcut and the original are considered equal or not.
* Based on the above, you may get different results with a List vs. a Set, so play around and see which one better suits your needs.
* I think a directory's mod time only changes if you add or remove or rename files, or explicitly change it, as with the touch command in unix. I don't think modifying the contents of an existing directory cause that directory's mod time to be updated. If you want to know when a file has changed, you'll probably have to poll that file's mod time explicitly.
In light of the above, I suggest you start by writing a small program that does nothing but poll a directory every, say, 5 or 10 or 30 seconds and print out whether it's changed or not. Then, while that program is running, do various things like add, delete, rename, rename with same letters but different case, etc. and see if the program gives you the results you want. If not, you'll have to tweak it based on your findings. -
Copy file from directory to another directory
I need to copy a file from a directory to another directory, but that file is longer than 2M.
I put the data into a array of bytes and then i passed to a destination directory.
Now i'm using a BufferedOutputStream but, as i have a file whith 2M, and this dont work.
How can i resolve this problem.
Thanks, LuisI use This, and it works with all kinds of files. I use it for backups with thousands of files and subdirectories.
you can use this like "copyFiles("D:\\Source", "D:\\Destination")
The two directories in the parameter list must exist. Subdirectories will be generated from the method.
I hope this will help you.
private void copyFiles(String fromPath, String toPath)
// copies all files and it�s subdirectories from fromPath to toPath
// fromPath and toPath must exist
if (fromPath != null)
File dir = new File(fromPath);
if (dir.exists() && dir.isDirectory())
File [] fileList = dir.listFiles();
int count = fileList.length;
int i = 0;
while (i < count)
File f = fileList;
i++;
if (f.isFile())
String toFile = toPath + File.separator + f.getName();
copyFile(f.getPath(), toFile);
else
if (f.isDirectory())
File newPath = new File(toPath + File.separator + f.getName());
newPath.mkdirs();
copyFiles(f.getPath(), newPath.getPath());
}// while (i < count
}// if (dir.exists() && dir.isDirectory())
}// if (fromPath != null)
}// copyFiles(String fromPath, String toPath)
private void copyFile(String src, String dest)
// Copies a single File with date and time attributes
long fileTime;
try
FileChannel in = new FileInputStream(src).getChannel();
FileChannel out = new FileOutputStream(dest).getChannel();
File inInfo = new File(src);
fileTime = inInfo.lastModified();
in.transferTo(0, in.size(), out);
in.close();
out.close();
File outInfo = new File(dest);
outInfo.setLastModified(fileTime);
} catch (IOException ioe)
System.out.println("An error occured: " + ioe.getMessage()); -
Retreiving the file names from directory inside another directory from application server
Hi,
I had a problem in retreiving the file names from a directory inside another directory.
I tried using the FM's SUBST_GET_FILE_LIST, RZL_READ_DIR_LOCAL and EPS_GET_DIRECTORY_LISTING
But here I am getting only one directory details.
Actually my file is located a directory inside one more directory and one more directory and inside the files are located.
i.e total 3 directories inside the 3rd one my files are there.
I need to read the latest file name in the directory.
So that i can do some manipulation after getting the file name.
Is there option like OPEN DATASET , READ DATASET and CLOSE DATASET?
Can anyone please let me know How can i acheive this one.
Regards
RamHi Ram,
Following thread can be helpful for you, were it shows in the tables structure rsfillst a field RSFILLST-TYPE whether its a directory or file..........
http://scn.sap.com/thread/865272
thanks and regards,
narayan -
How to duplicate a file in a directory to another directory?
I am a student just has just learn some basic Java programming...May i know how to duplicate a file in a directory to another directory?
How to start in doing this?
Thank YouI was suggesting to use java to send commands to the system shell so to speak....
I don't know of a way to do this... under the File class you can delete files, but there is no provision to copy Files so to speak....
one way would to be to open the file you want to copy with a file reader, and then write it all out to your new file.
see http://java.sun.com/j2se/1.3/docs/api/java/io/FileReader.html for information of FileReaders -
10.6 home directory mounting with active directory and open directory integration
Hi guys i am having some issues in my new mac environment. I have a windows network with an server 2008 active directory. I have just recentlly created a "magic triangle" setup with active directory and open directory. When my users login via windows their home folders mount perfect. When any user logs in to any iMac in the building it does not work. They login perfectly fine, but their home folders do not mount. When i try mounting them manually with smb, i get a prompt for credentials. I am thinking this is my issue, my Single sign on with kerbos is working but for some reason is not logging in correctly. If i type in my credentials with my domain first then my name it works.
For example DOMAIN\jsmith works, but the way i think the mac and active directory is doing it now is just jsmith without the DOMAIN.
I feel like this is the problem with the home folders not mounting.
Can anyone provide some help with this?
Thanks,
DaniHi dani190,
are you using the fully qualified domain name of the network server? ie if your server is bob. and your domain is domain.company.com. then the FQDNS would typically be bob.domain.company.com or bob.company.com.
If the FQDNS works, then have you checked in the AD to make sure the path to the network home folder uses the FQDNS?
For the contact search path, did you put the AD at the top the list? (in directory utility)
Did you set the WINS work group on your client computer to your domain?
ie:Apple Menu, System Preferences, Network, Active Network Port (ethernet and or airport) , Advanced Button, WINS Tab, set workgroup to the name of your domain. ie domain.company.com and or company.com -
Hi ,
I have uploaded image in AL11 and trying to link to thorough OA_UPLOAD_AND_LINK program. But when crosschecked it is existing there.
passed values in selection screen link below= >
while doing it an error is coming 'Either no file exists in the directory or the directory cannot be found'.
Directory is identified by program but file does not.
Any solution?
P.S. files are uploaded and saved in JPG formatTry to clear the flag "Processing in Front End", in this way the program will search for the file on application server and not from the front end.
Or select a file directly from your computer.
Regards. -
Event ID 91 Could not connect to the Active Directory. Active Directory Certificate Services
Could not connect to the Active Directory. Active Directory Certificate Services will retry when processing requires Active Directory access.
Event ID: 91
Task Category: None
Level: Error
Keywords: Classic
User: SYSTEM
Computer: DC1.chickbuns.com
Description:
Could not connect to the Active Directory. Active Directory Certificate Services will retry when processing requires Active Directory access.
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider Name="Microsoft-Windows-CertificationAuthority" Guid="{6A71D062-9AFE-4F35-AD08-52134F85DFB9}" EventSourceName="CertSvc" />
<EventID Qualifiers="49754">91</EventID>
<Version>0</Version>
<Level>2</Level>
<Task>0</Task>
<Opcode>0</Opcode>
<Keywords>0x80000000000000</Keywords>
<TimeCreated SystemTime="2014-01-07T19:34:00.000000000Z" />
<EventRecordID>819</EventRecordID>
<Correlation />
<Execution ProcessID="0" ThreadID="0" />
<Channel>Application</Channel>
<Computer>DC1.chickbuns.com</Computer>
<Security UserID="S-1-5-18" />
</System>
<EventData Name="MSG_E_DS_RETRY">
</EventData>
</Event>
:\Users\Administrator>dcdiag /fix
Directory Server Diagnosis
Performing initial setup:
Trying to find home server...
Home Server = DC1
* Identified AD Forest.
Done gathering initial info.
Doing initial required tests
Testing server: Default-First-Site-Name\DC1
Starting test: Connectivity
......................... DC1 passed test Connectivity
Doing primary tests
Testing server: Default-First-Site-Name\DC1
Starting test: Advertising
Warning: DC1 is not advertising as a time server.
......................... DC1 failed test Advertising
Starting test: FrsEvent
......................... DC1 passed test FrsEvent
Starting test: DFSREvent
......................... DC1 passed test DFSREvent
Starting test: SysVolCheck
......................... DC1 passed test SysVolCheck
Starting test: KccEvent
......................... DC1 passed test KccEvent
Starting test: KnowsOfRoleHolders
......................... DC1 passed test KnowsOfRoleHolders
Starting test: MachineAccount
......................... DC1 passed test MachineAccount
Starting test: NCSecDesc
......................... DC1 passed test NCSecDesc
Starting test: NetLogons
......................... DC1 passed test NetLogons
Starting test: ObjectsReplicated
......................... DC1 passed test ObjectsReplicated
Starting test: Replications
......................... DC1 passed test Replications
Starting test: RidManager
......................... DC1 passed test RidManager
Starting test: Services
......................... DC1 passed test Services
Starting test: SystemLog
......................... DC1 passed test SystemLog
Starting test: VerifyReferences
......................... DC1 passed test VerifyReferences
Running partition tests on : ForestDnsZones
Starting test: CheckSDRefDom
......................... ForestDnsZones passed test CheckSDRefDom
Starting test: CrossRefValidation
......................... ForestDnsZones passed test
CrossRefValidation
Running partition tests on : DomainDnsZones
Starting test: CheckSDRefDom
......................... DomainDnsZones passed test CheckSDRefDom
Starting test: CrossRefValidation
......................... DomainDnsZones passed test
CrossRefValidation
Running partition tests on : Schema
Starting test: CheckSDRefDom
......................... Schema passed test CheckSDRefDom
Starting test: CrossRefValidation
......................... Schema passed test CrossRefValidation
Running partition tests on : Configuration
Starting test: CheckSDRefDom
......................... Configuration passed test CheckSDRefDom
Starting test: CrossRefValidation
......................... Configuration passed test CrossRefValidation
Running partition tests on : chickbuns
Starting test: CheckSDRefDom
......................... chickbuns passed test CheckSDRefDom
Starting test: CrossRefValidation
......................... chickbuns passed test CrossRefValidation
Running enterprise tests on : chickbuns.com
Starting test: LocatorCheck
Warning: DcGetDcName(TIME_SERVER) call failed, error 1355
A Time Server could not be located.
The server holding the PDC role is down.
Warning: DcGetDcName(GOOD_TIME_SERVER_PREFERRED) call failed, error
1355
A Good Time Server could not be located.
......................... chickbuns.com failed test LocatorCheck
Starting test: Intersite
......................... chickbuns.com passed test Intersite.My test lab one sinle domain controller server 2008 R2 Sp1 and member exchange server is using,the event error 91 is generated as per the technet article http://technet.microsoft.com/en-us/library/cc774525(v=ws.10).aspx the domain
computer and domain users in public key services container is not listed ..
C:\Users\Administrator>netdom /query fsmo
Schema master DC1.chickbuns.com
Domain naming master DC1.chickbuns.com
PDC DC1.chickbuns.com
RID pool manager DC1.chickbuns.com
Infrastructure master DC1.chickbuns.com
The command completed successfully.
Command Line: "dcdiag.exe
/V /D /C /E"
Directory Server Diagnosis
Performing initial setup:
Trying to find home server...
* Verifying that the local machine DC1, is a Directory Server.
Home Server = DC1
* Connecting to directory service on server DC1.
DC1.currentTime = 20140110072353.0Z
DC1.highestCommittedUSN = 131148
DC1.isSynchronized = 1
DC1.isGlobalCatalogReady = 1
* Identified AD Forest.
Collecting AD specific global data
* Collecting site info.
Calling ldap_search_init_page(hld,CN=Sites,CN=Configuration,DC=chickbuns,DC=com,LDAP_SCOPE_SUBTREE,(objectCategory=ntDSSiteSettings),.......
The previous call succeeded
Iterating through the sites
Looking at base site object: CN=NTDS Site Settings,CN=Default-First-Site-Name,CN=Sites,CN=Configuration,DC=chickbuns,DC=com
Getting ISTG and options for the site
* Identifying all servers.
Calling ldap_search_init_page(hld,CN=Sites,CN=Configuration,DC=chickbuns,DC=com,LDAP_SCOPE_SUBTREE,(objectClass=ntDSDsa),.......
The previous call succeeded....
The previous call succeeded
Iterating through the list of servers
Getting information for the server CN=NTDS Settings,CN=DC1,CN=Servers,CN=Default-First-Site-Name,CN=Sites,CN=Configuration,DC=chickbuns,DC=com
objectGuid obtained
InvocationID obtained
dnsHostname obtained
site info obtained
All the info for the server collected
DC1.currentTime = 20140110072353.0Z
DC1.highestCommittedUSN = 131148
DC1.isSynchronized = 1
DC1.isGlobalCatalogReady = 1
* Identifying all NC cross-refs.
* Found 1 DC(s). Testing 1 of them.
Done gathering initial info.
===============================================Printing out pDsInfo
GLOBAL:
ulNumServers=1
pszRootDomain=chickbuns.com
pszNC=
pszRootDomainFQDN=DC=chickbuns,DC=com
pszConfigNc=CN=Configuration,DC=chickbuns,DC=com
pszPartitionsDn=CN=Partitions,CN=Configuration,DC=chickbuns,DC=com
fAdam=0
iSiteOptions=0
dwTombstoneLifeTimeDays=180
dwForestBehaviorVersion=3
HomeServer=0, DC1
SERVER: pServer[0].pszName=DC1
pServer[0].pszGuidDNSName (binding str)=771aab3d-96cd-4fb1-90cd-0899fa6b6207._msdcs.chickbuns.com
pServer[0].pszDNSName=DC1.chickbuns.com
pServer[0].pszLdapPort=(null)
pServer[0].pszSslPort=(null)
pServer[0].pszDn=CN=NTDS Settings,CN=DC1,CN=Servers,CN=Default-First-Site-Name,CN=Sites,CN=Configuration,DC=chickbuns,DC=com
pServer[0].pszComputerAccountDn=CN=DC1,OU=Domain Controllers,DC=chickbuns,DC=com
pServer[0].uuidObjectGuid=771aab3d-96cd-4fb1-90cd-0899fa6b6207
pServer[0].uuidInvocationId=771aab3d-96cd-4fb1-90cd-0899fa6b6207
pServer[0].iSite=0 (Default-First-Site-Name)
pServer[0].iOptions=1
pServer[0].ftLocalAcquireTime=ea9513a0 01cf0dd4
pServer[0].ftRemoteConnectTime=ea2bca80 01cf0dd4
pServer[0].ppszMaster/FullReplicaNCs:
ppszMaster/FullReplicaNCs[0]=DC=ForestDnsZones,DC=chickbuns,DC=com
ppszMaster/FullReplicaNCs[1]=DC=DomainDnsZones,DC=chickbuns,DC=com
ppszMaster/FullReplicaNCs[2]=CN=Schema,CN=Configuration,DC=chickbuns,DC=com
ppszMaster/FullReplicaNCs[3]=CN=Configuration,DC=chickbuns,DC=com
ppszMaster/FullReplicaNCs[4]=DC=chickbuns,DC=com
SITES: pSites[0].pszName=Default-First-Site-Name
pSites[0].pszSiteSettings=CN=NTDS Site Settings,CN=Default-First-Site-Name,CN=Sites,CN=Configuration,DC=chickbuns,DC=com
pSites[0].pszISTG=CN=NTDS Settings,CN=DC1,CN=Servers,CN=Default-First-Site-Name,CN=Sites,CN=Configuration,DC=chickbuns,DC=com
pSites[0].iSiteOption=0
pSites[0].cServers=1
NC: pNCs[0].pszName=ForestDnsZones
pNCs[0].pszDn=DC=ForestDnsZones,DC=chickbuns,DC=com
pNCs[0].aCrInfo[0].dwFlags=0x00000201
pNCs[0].aCrInfo[0].pszDn=CN=5fc582f9-b435-49a1-aa54-41769fc24206,CN=Partitions,CN=Configuration,DC=chickbuns,DC=com
pNCs[0].aCrInfo[0].pszDnsRoot=ForestDnsZones.chickbuns.com
pNCs[0].aCrInfo[0].iSourceServer=0
pNCs[0].aCrInfo[0].pszSourceServer=(null)
pNCs[0].aCrInfo[0].ulSystemFlags=0x00000005
pNCs[0].aCrInfo[0].bEnabled=TRUE
pNCs[0].aCrInfo[0].ftWhenCreated=00000000 00000000
pNCs[0].aCrInfo[0].pszSDReferenceDomain=(null)
pNCs[0].aCrInfo[0].pszNetBiosName=(null)
pNCs[0].aCrInfo[0].cReplicas=-1
pNCs[0].aCrInfo[0].aszReplicas=
NC: pNCs[1].pszName=DomainDnsZones
pNCs[1].pszDn=DC=DomainDnsZones,DC=chickbuns,DC=com
pNCs[1].aCrInfo[0].dwFlags=0x00000201
pNCs[1].aCrInfo[0].pszDn=CN=9e1c2cb8-b90b-4e9f-90dd-9903f935e4af,CN=Partitions,CN=Configuration,DC=chickbuns,DC=com
pNCs[1].aCrInfo[0].pszDnsRoot=DomainDnsZones.chickbuns.com
pNCs[1].aCrInfo[0].iSourceServer=0
pNCs[1].aCrInfo[0].pszSourceServer=(null)
pNCs[1].aCrInfo[0].ulSystemFlags=0x00000005
pNCs[1].aCrInfo[0].bEnabled=TRUE
pNCs[1].aCrInfo[0].ftWhenCreated=00000000 00000000
pNCs[1].aCrInfo[0].pszSDReferenceDomain=(null)
pNCs[1].aCrInfo[0].pszNetBiosName=(null)
pNCs[1].aCrInfo[0].cReplicas=-1
pNCs[1].aCrInfo[0].aszReplicas=
NC: pNCs[2].pszName=Schema
pNCs[2].pszDn=CN=Schema,CN=Configuration,DC=chickbuns,DC=com
pNCs[2].aCrInfo[0].dwFlags=0x00000201
pNCs[2].aCrInfo[0].pszDn=CN=Enterprise Schema,CN=Partitions,CN=Configuration,DC=chickbuns,DC=com
pNCs[2].aCrInfo[0].pszDnsRoot=chickbuns.com
pNCs[2].aCrInfo[0].iSourceServer=0
pNCs[2].aCrInfo[0].pszSourceServer=(null)
pNCs[2].aCrInfo[0].ulSystemFlags=0x00000001
pNCs[2].aCrInfo[0].bEnabled=TRUE
pNCs[2].aCrInfo[0].ftWhenCreated=00000000 00000000
pNCs[2].aCrInfo[0].pszSDReferenceDomain=(null)
pNCs[2].aCrInfo[0].pszNetBiosName=(null)
pNCs[2].aCrInfo[0].cReplicas=-1
pNCs[2].aCrInfo[0].aszReplicas=
NC: pNCs[3].pszName=Configuration
pNCs[3].pszDn=CN=Configuration,DC=chickbuns,DC=com
pNCs[3].aCrInfo[0].dwFlags=0x00000201
pNCs[3].aCrInfo[0].pszDn=CN=Enterprise Configuration,CN=Partitions,CN=Configuration,DC=chickbuns,DC=com
pNCs[3].aCrInfo[0].pszDnsRoot=chickbuns.com
pNCs[3].aCrInfo[0].iSourceServer=0
pNCs[3].aCrInfo[0].pszSourceServer=(null)
pNCs[3].aCrInfo[0].ulSystemFlags=0x00000001
pNCs[3].aCrInfo[0].bEnabled=TRUE
pNCs[3].aCrInfo[0].ftWhenCreated=00000000 00000000
pNCs[3].aCrInfo[0].pszSDReferenceDomain=(null)
pNCs[3].aCrInfo[0].pszNetBiosName=(null)
pNCs[3].aCrInfo[0].cReplicas=-1
pNCs[3].aCrInfo[0].aszReplicas=
NC: pNCs[4].pszName=chickbuns
pNCs[4].pszDn=DC=chickbuns,DC=com
pNCs[4].aCrInfo[0].dwFlags=0x00000201
pNCs[4].aCrInfo[0].pszDn=CN=CHICKBUNS,CN=Partitions,CN=Configuration,DC=chickbuns,DC=com
pNCs[4].aCrInfo[0].pszDnsRoot=chickbuns.com
pNCs[4].aCrInfo[0].iSourceServer=0
pNCs[4].aCrInfo[0].pszSourceServer=(null)
pNCs[4].aCrInfo[0].ulSystemFlags=0x00000003
pNCs[4].aCrInfo[0].bEnabled=TRUE
pNCs[4].aCrInfo[0].ftWhenCreated=00000000 00000000
pNCs[4].aCrInfo[0].pszSDReferenceDomain=(null)
pNCs[4].aCrInfo[0].pszNetBiosName=(null)
pNCs[4].aCrInfo[0].cReplicas=-1
pNCs[4].aCrInfo[0].aszReplicas=
5 NC TARGETS: ForestDnsZones, DomainDnsZones, Schema, Configuration, chickbuns,
1 TARGETS: DC1,
=============================================Done Printing pDsInfo
Doing initial required tests
Testing server: Default-First-Site-Name\DC1
Starting test: Connectivity
* Active Directory LDAP Services Check
Determining IP4 connectivity
Failure Analysis: DC1 ... OK.
* Active Directory RPC Services Check
......................... DC1 passed test Connectivity
Doing primary tests
Testing server: Default-First-Site-Name\DC1
Starting test: Advertising
The DC DC1 is advertising itself as a DC and having a DS.
The DC DC1 is advertising as an LDAP server
The DC DC1 is advertising as having a writeable directory
The DC DC1 is advertising as a Key Distribution Center
The DC DC1 is advertising as a time server
The DS DC1 is advertising as a GC.
......................... DC1 passed test Advertising
Starting test: CheckSecurityError
* Dr Auth: Beginning security errors check!
Found KDC DC1 for domain chickbuns.com in site Default-First-Site-Name
Checking machine account for DC DC1 on DC DC1.
* SPN found :LDAP/DC1.chickbuns.com/chickbuns.com
* SPN found :LDAP/DC1.chickbuns.com
* SPN found :LDAP/DC1
* SPN found :LDAP/DC1.chickbuns.com/CHICKBUNS
* SPN found :LDAP/771aab3d-96cd-4fb1-90cd-0899fa6b6207._msdcs.chickbuns.com
* SPN found :E3514235-4B06-11D1-AB04-00C04FC2DCD2/771aab3d-96cd-4fb1-90cd-0899fa6b6207/chickbuns.com
* SPN found :HOST/DC1.chickbuns.com/chickbuns.com
* SPN found :HOST/DC1.chickbuns.com
* SPN found :HOST/DC1
* SPN found :HOST/DC1.chickbuns.com/CHICKBUNS
* SPN found :GC/DC1.chickbuns.com/chickbuns.com
[DC1] No security related replication errors were found on this DC!
To target the connection to a specific source DC use /ReplSource:<DC>.
......................... DC1 passed test CheckSecurityError
Starting test: CutoffServers
* Configuration Topology Aliveness Check
* Analyzing the alive system replication topology for DC=ForestDnsZones,DC=chickbuns,DC=com.
* Performing upstream (of target) analysis.
* Performing downstream (of target) analysis.
* Analyzing the alive system replication topology for DC=DomainDnsZones,DC=chickbuns,DC=com.
* Performing upstream (of target) analysis.
* Performing downstream (of target) analysis.
* Analyzing the alive system replication topology for CN=Schema,CN=Configuration,DC=chickbuns,DC=com.
* Performing upstream (of target) analysis.
* Performing downstream (of target) analysis.
* Analyzing the alive system replication topology for CN=Configuration,DC=chickbuns,DC=com.
* Performing upstream (of target) analysis.
* Performing downstream (of target) analysis.
* Analyzing the alive system replication topology for DC=chickbuns,DC=com.
* Performing upstream (of target) analysis.
* Performing downstream (of target) analysis.
......................... DC1 passed test CutoffServers
Starting test: FrsEvent
* The File Replication Service Event log test
Skip the test because the server is running DFSR.
......................... DC1 passed test FrsEvent
Starting test: DFSREvent
The DFS Replication Event Log.
......................... DC1 passed test DFSREvent
Starting test: SysVolCheck
* The File Replication Service SYSVOL ready test
File Replication Service's SYSVOL is ready
......................... DC1 passed test SysVolCheck
Starting test: FrsSysVol
* The File Replication Service SYSVOL ready test
File Replication Service's SYSVOL is ready
......................... DC1 passed test FrsSysVol
Starting test: KccEvent
* The KCC Event log test
Found no KCC errors in "Directory Service" Event log in the last 15 minutes.
......................... DC1 passed test KccEvent
Starting test: KnowsOfRoleHolders
Role Schema Owner = CN=NTDS Settings,CN=DC1,CN=Servers,CN=Default-First-Site-Name,CN=Sites,CN=Configuration,DC=chickbuns,DC=com
Role Domain Owner = CN=NTDS Settings,CN=DC1,CN=Servers,CN=Default-First-Site-Name,CN=Sites,CN=Configuration,DC=chickbuns,DC=com
Role PDC Owner = CN=NTDS Settings,CN=DC1,CN=Servers,CN=Default-First-Site-Name,CN=Sites,CN=Configuration,DC=chickbuns,DC=com
Role Rid Owner = CN=NTDS Settings,CN=DC1,CN=Servers,CN=Default-First-Site-Name,CN=Sites,CN=Configuration,DC=chickbuns,DC=com
Role Infrastructure Update Owner = CN=NTDS Settings,CN=DC1,CN=Servers,CN=Default-First-Site-Name,CN=Sites,CN=Configuration,DC=chickbuns,DC=com
......................... DC1 passed test KnowsOfRoleHolders
Starting test: MachineAccount
Checking machine account for DC DC1 on DC DC1.
* SPN found :LDAP/DC1.chickbuns.com/chickbuns.com
* SPN found :LDAP/DC1.chickbuns.com
* SPN found :LDAP/DC1
* SPN found :LDAP/DC1.chickbuns.com/CHICKBUNS
* SPN found :LDAP/771aab3d-96cd-4fb1-90cd-0899fa6b6207._msdcs.chickbuns.com
* SPN found :E3514235-4B06-11D1-AB04-00C04FC2DCD2/771aab3d-96cd-4fb1-90cd-0899fa6b6207/chickbuns.com
* SPN found :HOST/DC1.chickbuns.com/chickbuns.com
* SPN found :HOST/DC1.chickbuns.com
* SPN found :HOST/DC1
* SPN found :HOST/DC1.chickbuns.com/CHICKBUNS
* SPN found :GC/DC1.chickbuns.com/chickbuns.com
......................... DC1 passed test MachineAccount
Starting test: NCSecDesc
* Security Permissions check for all NC's on DC DC1.
* Security Permissions Check for
DC=ForestDnsZones,DC=chickbuns,DC=com
(NDNC,Version 3)
* Security Permissions Check for
DC=DomainDnsZones,DC=chickbuns,DC=com
(NDNC,Version 3)
* Security Permissions Check for
CN=Schema,CN=Configuration,DC=chickbuns,DC=com
(Schema,Version 3)
* Security Permissions Check for
CN=Configuration,DC=chickbuns,DC=com
(Configuration,Version 3)
* Security Permissions Check for
DC=chickbuns,DC=com
(Domain,Version 3)
......................... DC1 passed test NCSecDesc
Starting test: NetLogons
* Network Logons Privileges Check
Verified share \\DC1\netlogon
Verified share \\DC1\sysvol
......................... DC1 passed test NetLogons
Starting test: ObjectsReplicated
DC1 is in domain DC=chickbuns,DC=com
Checking for CN=DC1,OU=Domain Controllers,DC=chickbuns,DC=com in domain DC=chickbuns,DC=com on 1 servers
Object is up-to-date on all servers.
Checking for CN=NTDS Settings,CN=DC1,CN=Servers,CN=Default-First-Site-Name,CN=Sites,CN=Configuration,DC=chickbuns,DC=com in domain CN=Configuration,DC=chickbuns,DC=com on 1 servers
Object is up-to-date on all servers.
......................... DC1 passed test ObjectsReplicated
Starting test: OutboundSecureChannels
* The Outbound Secure Channels test
** Did not run Outbound Secure Channels test because /testdomain: was
not entered
......................... DC1 passed test OutboundSecureChannels
Starting test: Replications
* Replications Check
DC=ForestDnsZones,DC=chickbuns,DC=com has 1 cursors.
DC=DomainDnsZones,DC=chickbuns,DC=com has 1 cursors.
CN=Schema,CN=Configuration,DC=chickbuns,DC=com has 1 cursors.
CN=Configuration,DC=chickbuns,DC=com has 1 cursors.
DC=chickbuns,DC=com has 1 cursors.
* Replication Latency Check
......................... DC1 passed test Replications
Starting test: RidManager
ridManagerReference = CN=RID Manager$,CN=System,DC=chickbuns,DC=com
* Available RID Pool for the Domain is 1600 to 1073741823
fSMORoleOwner = CN=NTDS Settings,CN=DC1,CN=Servers,CN=Default-First-Site-Name,CN=Sites,CN=Configuration,DC=chickbuns,DC=com
* DC1.chickbuns.com is the RID Master
* DsBind with RID Master was successful
rIDSetReferences = CN=RID Set,CN=DC1,OU=Domain Controllers,DC=chickbuns,DC=com
* rIDAllocationPool is 1100 to 1599
* rIDPreviousAllocationPool is 1100 to 1599
* rIDNextRID: 1103
......................... DC1 passed test RidManager
Starting test: Services
* Checking Service: EventSystem
* Checking Service: RpcSs
* Checking Service: NTDS
* Checking Service: DnsCache
* Checking Service: DFSR
* Checking Service: IsmServ
* Checking Service: kdc
* Checking Service: SamSs
* Checking Service: LanmanServer
* Checking Service: LanmanWorkstation
* Checking Service: w32time
* Checking Service: NETLOGON
......................... DC1 passed test Services
Starting test: SystemLog
* The System Event log test
Found no errors in "System" Event log in the last 60 minutes.
......................... DC1 passed test SystemLog
Starting test: Topology
* Configuration Topology Integrity Check
* Analyzing the connection topology for DC=ForestDnsZones,DC=chickbuns,DC=com.
* Performing upstream (of target) analysis.
* Performing downstream (of target) analysis.
* Analyzing the connection topology for DC=DomainDnsZones,DC=chickbuns,DC=com.
* Performing upstream (of target) analysis.
* Performing downstream (of target) analysis.
* Analyzing the connection topology for CN=Schema,CN=Configuration,DC=chickbuns,DC=com.
* Performing upstream (of target) analysis.
* Performing downstream (of target) analysis.
* Analyzing the connection topology for CN=Configuration,DC=chickbuns,DC=com.
* Performing upstream (of target) analysis.
* Performing downstream (of target) analysis.
* Analyzing the connection topology for DC=chickbuns,DC=com.
* Performing upstream (of target) analysis.
* Performing downstream (of target) analysis.
......................... DC1 passed test Topology
Starting test: VerifyEnterpriseReferences
......................... DC1 passed test VerifyEnterpriseReferences
Starting test: VerifyReferences
The system object reference (serverReference)
CN=DC1,OU=Domain Controllers,DC=chickbuns,DC=com and backlink on
CN=DC1,CN=Servers,CN=Default-First-Site-Name,CN=Sites,CN=Configuration,DC=chickbuns,DC=com
are correct.
The system object reference (serverReferenceBL)
CN=DC1,CN=Topology,CN=Domain System Volume,CN=DFSR-GlobalSettings,CN=System,DC=chickbuns,DC=com
and backlink on
CN=NTDS Settings,CN=DC1,CN=Servers,CN=Default-First-Site-Name,CN=Sites,CN=Configuration,DC=chickbuns,DC=com
are correct.
The system object reference (msDFSR-ComputerReferenceBL)
CN=DC1,CN=Topology,CN=Domain System Volume,CN=DFSR-GlobalSettings,CN=System,DC=chickbuns,DC=com
and backlink on CN=DC1,OU=Domain Controllers,DC=chickbuns,DC=com are
correct.
......................... DC1 passed test VerifyReferences
Starting test: VerifyReplicas
......................... DC1 passed test VerifyReplicas
Starting test: DNS
DNS Tests are running and not hung. Please wait a few minutes...
See DNS test in enterprise tests section for results
......................... DC1 passed test DNS
Running partition tests on : ForestDnsZones
Starting test: CheckSDRefDom
......................... ForestDnsZones passed test CheckSDRefDom
Starting test: CrossRefValidation
......................... ForestDnsZones passed test
CrossRefValidation
Running partition tests on : DomainDnsZones
Starting test: CheckSDRefDom
......................... DomainDnsZones passed test CheckSDRefDom
Starting test: CrossRefValidation
......................... DomainDnsZones passed test
CrossRefValidation
Running partition tests on : Schema
Starting test: CheckSDRefDom
......................... Schema passed test CheckSDRefDom
Starting test: CrossRefValidation
......................... Schema passed test CrossRefValidation
Running partition tests on : Configuration
Starting test: CheckSDRefDom
......................... Configuration passed test CheckSDRefDom
Starting test: CrossRefValidation
......................... Configuration passed test CrossRefValidation
Running partition tests on : chickbuns
Starting test: CheckSDRefDom
......................... chickbuns passed test CheckSDRefDom
Starting test: CrossRefValidation
......................... chickbuns passed test CrossRefValidation
Running enterprise tests on : chickbuns.com
Starting test: DNS
Test results for domain controllers:
DC: DC1.chickbuns.com
Domain: chickbuns.com
TEST: Authentication (Auth)
Authentication test: Successfully completed
TEST: Basic (Basc)
The OS
Microsoft Windows Server 2008 R2 Enterprise (Service Pack level: 1.0)
is supported.
NETLOGON service is running
kdc service is running
DNSCACHE service is running
DNS service is running
DC is a DNS server
Network adapters information:
Adapter [00000007] Intel(R) PRO/1000 MT Network Connection:
MAC address is 00:0C:29:DE:7F:EB
IP Address is static
IP address: 192.168.1.30
DNS servers:
192.168.1.30 (dc1.chickbuns.com.) [Valid]
The A host record(s) for this DC was found
The SOA record for the Active Directory zone was found
The Active Directory zone on this DC/DNS server was found primary
Root zone on this DC/DNS server was not found
TEST: Forwarders/Root hints (Forw)
Recursion is enabled
Forwarders Information:
192.168.1.1 (<name unavailable>) [Valid]
TEST: Delegations (Del)
Delegation information for the zone: chickbuns.com.
Delegated domain name: _msdcs.chickbuns.com.
DNS server: dc1.chickbuns.com. IP:192.168.1.30 [Valid]
TEST: Dynamic update (Dyn)
Test record dcdiag-test-record added successfully in zone chickbuns.com
Test record dcdiag-test-record deleted successfully in zone chickbuns.com
TEST: Records registration (RReg)
Network Adapter
[00000007] Intel(R) PRO/1000 MT Network Connection:
Matching CNAME record found at DNS server 192.168.1.30:
771aab3d-96cd-4fb1-90cd-0899fa6b6207._msdcs.chickbuns.com
Matching A record found at DNS server 192.168.1.30:
DC1.chickbuns.com
Matching SRV record found at DNS server 192.168.1.30:
_ldap._tcp.chickbuns.com
Matching SRV record found at DNS server 192.168.1.30:
_ldap._tcp.48c41195-2630-4461-aaef-ec2a63cd8bf3.domains._msdcs.chickbuns.com
Matching SRV record found at DNS server 192.168.1.30:
_kerberos._tcp.dc._msdcs.chickbuns.com
Matching SRV record found at DNS server 192.168.1.30:
_ldap._tcp.dc._msdcs.chickbuns.com
Matching SRV record found at DNS server 192.168.1.30:
_kerberos._tcp.chickbuns.com
Matching SRV record found at DNS server 192.168.1.30:
_kerberos._udp.chickbuns.com
Matching SRV record found at DNS server 192.168.1.30:
_kpasswd._tcp.chickbuns.com
Matching SRV record found at DNS server 192.168.1.30:
_ldap._tcp.Default-First-Site-Name._sites.chickbuns.com
Matching SRV record found at DNS server 192.168.1.30:
_kerberos._tcp.Default-First-Site-Name._sites.dc._msdcs.chickbuns.com
Matching SRV record found at DNS server 192.168.1.30:
_ldap._tcp.Default-First-Site-Name._sites.dc._msdcs.chickbuns.com
Matching SRV record found at DNS server 192.168.1.30:
_kerberos._tcp.Default-First-Site-Name._sites.chickbuns.com
Matching SRV record found at DNS server 192.168.1.30:
_ldap._tcp.gc._msdcs.chickbuns.com
Matching A record found at DNS server 192.168.1.30:
gc._msdcs.chickbuns.com
Matching SRV record found at DNS server 192.168.1.30:
_gc._tcp.Default-First-Site-Name._sites.chickbuns.com
Matching SRV record found at DNS server 192.168.1.30:
_ldap._tcp.Default-First-Site-Name._sites.gc._msdcs.chickbuns.com
Matching SRV record found at DNS server 192.168.1.30:
_ldap._tcp.pdc._msdcs.chickbuns.com
Total query time:0 min. 3 sec.. Total RPC connection
time:0 min. 0 sec.
Total WMI connection time:0 min. 6 sec. Total Netuse connection
time:0 min. 0 sec.
Summary of test results for DNS servers used by the above domain
controllers:
DNS server: 192.168.1.1 (<name unavailable>)
All tests passed on this DNS server
Total query time:0 min. 0 sec., Total WMI connection
time:0 min. 5 sec.
DNS server: 192.168.1.30 (dc1.chickbuns.com.)
All tests passed on this DNS server
Name resolution is functional._ldap._tcp SRV record for the forest root domain is registered
DNS delegation for the domain _msdcs.chickbuns.com. is operational on IP 192.168.1.30
Total query time:0 min. 3 sec., Total WMI connection
time:0 min. 0 sec.
Summary of DNS test results:
Auth Basc Forw Del Dyn RReg Ext
Domain: chickbuns.com
DC1 PASS PASS PASS PASS PASS PASS n/a
Total Time taken to test all the DCs:0 min. 9 sec.
......................... chickbuns.com passed test DNS
Starting test: LocatorCheck
GC Name: \\DC1.chickbuns.com
Locator Flags: 0xe00033fd
PDC Name: \\DC1.chickbuns.com
Locator Flags: 0xe00033fd
Time Server Name: \\DC1.chickbuns.com
Locator Flags: 0xe00033fd
Preferred Time Server Name: \\DC1.chickbuns.com
Locator Flags: 0xe00033fd
KDC Name: \\DC1.chickbuns.com
Locator Flags: 0xe00033fd
......................... chickbuns.com passed test LocatorCheck
Starting test: FsmoCheck
GC Name: \\DC1.chickbuns.com
Locator Flags: 0xe00033fd
PDC Name: \\DC1.chickbuns.com
Locator Flags: 0xe00033fd
Time Server Name: \\DC1.chickbuns.com
Locator Flags: 0xe00033fd
Preferred Time Server Name: \\DC1.chickbuns.com
Locator Flags: 0xe00033fd
KDC Name: \\DC1.chickbuns.com
Locator Flags: 0xe00033fd
......................... chickbuns.com passed test FsmoCheck
Starting test: Intersite
Skipping site Default-First-Site-Name, this site is outside the scope
provided by the command line arguments provided.
......................... chickbuns.com passed test Intersite -
Event properties – Event 91, Level Error, Event ID 91, Date and time 5/10/2012 11:29:48AM, Service CertificationAuthority
General:
Could not connect to the Active Directory.
Active Directory Certificate Services will retry when processing requires Active Directory access.
We have a Windows 2008 Server Enterprise with AD . I would like to enable the service "Certificate Services" that
allow me to enable radius to authenticate users wireless with the active directory.Hi,
Can you please check this forum or someone from Microsoft, as we have post here dating back from October that are not being answered.
Everything for us is exactly the same as szucsati and Racom
NMNM,
Please give us an answer on this as the link provided is absolutely useless.
Thank you. -
GRC CUP how to pull manager from Global directory or Active directory
Hi,
how can i pull manager from global directory or active directory as approver.We are designing dual control approval process.First manager from global directory can approve then role owner.In workflow stages i can only see approvers information has to be entered manaually in CAD.Also i am looking when requestor requesting request,it should automatically fetch manager information on the request page,once user id selected.
Thanks
MushuDear Mushu,
Two things you need to do
1.) Maintain the Manager's Field in Active Directory and do mapping in CUP>Configuration>Field Mapping-->LDAP Mapping
2.) Keep LDAP as authentication system so that whenever a User has to log into the CUP he will do using his network id and his manager is automatically pulled from Active Directory.
Then in the workflow you can keep the approver determinator as Manager by which the request will routed to the appropriate manager. Hope that helps.
Edited by: celestemay17 on Dec 8, 2010 12:05 PM -
Revision: 4321
Author: [email protected]
Date: 2008-12-15 18:22:07 -0800 (Mon, 15 Dec 2008)
Log Message:
Fixing name of strokes directory in the directory skeleton for fxgutils.
QE: No
Doc: No
Added Paths:
flex/sdk/trunk/modules/fxgutils/src/java/flash/fxg/dom/strokes/
Removed Paths:
flex/sdk/trunk/modules/fxgutils/src/java/flash/fxg/dom/stokes/HFS+ is case insensitive. So it is working as it is supposed to work.
There is a Case Sensitive version of HFS+ which you can use to format your disk. Be aware that use of this version is known to cause problems and is only recommended when it is absolutely required.
Allan -
Content generation
[Error: Unable to access the output directory. The directory is not writable, so the folio cannot be saved.]
This means?
This is fun BTW. Two days and two different silly errors applying themselves arbitrarily. Yesterday was the network, today its this.heres the fix i used for on a Mac
1. While in the Finder, select the menu command Finder > Preferences.
2. In the General panel, ensure the option "Connected Servers" is selected under the heading "Show these items on the desktop:", then close the preferences dialog box.
3. Choose the menu command Finder > Hide Others.
4. Close all open Finder windows to ensure you can see all items on your desktop.
5. If you locate what appears to be a mounted volume with the name "Users", Control + Click on its icon and choose the contextual menu command Eject "Users".
6. Add or update your article(s).
7. Cross fingers
8. If doesn't work ask for a refund -
Physical directory and logical directory
What is the difference between physical directory and logical directory in BPEL
Hi,
Physical : We need to Specify the complete directory.
Example: <Drive name>:\Temp\data
Logical: We need to specify a logical name for directory. It is defined as a property in the 'bpel.xml' file.
Example: if you specify 'READ' as the logical name, the following property is added to the bpel.xml file: <property name="READ"></property>
After this, u must have define the directory path.
For example, <Drive name>:\Temp\data for the file adapter: <property name="MyDirectory"><Drive name>:\Temp\data </property>
cheers,
Abhi -
I need to upload my files from one directory into other directory.
i need to upload my files from one directory into other directory.( all its contents,folders,sub folders, files etc)
for this task
suppose my source folder is C:/test/test1/test2/test3
and my destination is D:/
first i have to check whether my dest dirctory already contains source directory..and its files
if it contains the same structure then i have to replace the destination dir structure to source dir structure( to upadte changes)
if it(dest dir) not contains source dir ..means it doesn't contain source folder then
i have to create same source folder directory structure ( test.test1/test2/test3...) at destination(D:/) and copy all its contents frm source directory...
( means i don;t want to create manually same dir structure as source at destnation dir to copy all contents)I believe you need to read up on the class File.java (it comes with java).
Some examples:
File file = new File("C:/myDirectory");
if(file.isDirectory())
System.out.println("this is a directory");
if(file.isFile())
System.out.println("this is a file").
You will then need to read up on other classes to read/write to the file such as FileReader and FileWriter.
Maybe you are looking for
-
How do we make the apple icon on Macbook pro?
Hi, I wonder how I can make the apple icon on Macbook pro and how i make a heart ( not like this - <3) Someone knos what I have to do?
-
Dear Experts, We are not able to get vendor bank details in payment praposal or payment list when executing F110. we are using Payment medium program -RFFOD__U; and Name of print dataset-LIST3S as per our clinet country requiremtn we are using these
-
Interactive Report "Group By" Limitation
Hi, Anybody installed the latest APEX? i believe it's 4.2.3. Could you please tell me is the limitation for interactive report "group by" action increased? (3 columns max for my 4.2 version) I consider this is a major drawback... Thanks, John
-
Error when calling add method of UDO object
Hi all i've created a UDO object. when i invoke the method "add" i get the following error message: "Ref count for this object is higher then 0" anyone can tell me how to fix this? appreciate the help Yoav
-
Trouble signing in to adobe account.
When I try to open my software, it tells me to sign in, so I do, but it says I'm offline. Then I try to log into my account and it wont let me. Anyone else having this issue?