Disable all the components of a panel ( panels within the main panel )
Hi guys!
I have a problem!
i have to disable all the components of a panel. please note that i am also having panels within the main panel. please tell me how to do that!!!
its urgent!!
Hi guys!
I have a problem!Wouldn't have figured that one out by myself ...
its urgent!!No, it's not.
You know, a panel is most often a subclass of Container, so all you need to do is recursively disable all child components. The methods getComponents and getComponent are very helpful when trying to access child components. Code likeif ( comp instanceof Container )
// do soemthing
}will help in determining whether a child component is yet another Container.
Similar Messages
-
Why does the Utilities Folder not Show up within the Applications folder on my Dock
Why does the Utilities Folder not Show up within the Applications folder on my Dock, but is showing within the finder view? Thanks!
Lynn Kenneth PecknoldThanks, I have reminders on my iphone, which has all the icloud stuff
-
In Yosemite Mail, there is an issue where the signatures no longer toggle as in the past. If you change the existing signature, it just adds the new one vs replacing it within the body of the message. Thoughts?
Hi howe.sc,
When I checked for how signatures in Yosemite work, I found this.
Mail (Yosemite): Include signatures in messages
Delete a signature from a message: Select the signature, then press the Delete key.
Replace a signature in a message: Delete the existing signature, then add a different signature.
That sounds similar to what you are describing.
Take care,
Nubz -
I have CS 6 installed on a Win 7 OS machine. I can not connect to the internet to get updates from within the program. How do I fix this?
IP routing doesn't work the way many folks might initially think it does; functional IP routing requires manual configuration and the establishment of static routes and default routes specific to the local network configurations, and it's very easy to get it wrong, or to get the default route swapped. Multiple NIC boxes don't magically work, either. (Been there, done that, wondered what happened to my network when the paths got reordered or my route settings were messed up, etc.)
Routing configuration errors can be quite subtle, too. (Again, voice of experience. Ever had a thousand-seat office LAN accidentally routing through your desktop? As the, um, unnamed guilty party discovered, getting into that configuration was subtle. Seeing the performance crater on the fellow's box and on the LAN was obvious.)
Knowing how IP routing works is a prerequisite to getting this configuration to work; there's manual configuration required. Clearly something has gone weird here.
What to do? Read up on IP routing. I'll again suggest the threads and the manual mentioned earlier.
And in general, I prefer to avoid using my comparatively expensive Mac boxes as sub-optimal IP routers or as firewall boxes. General-purpose operating systems and generic x86 boxes are going to be inherently poor IP routers. Dedicated routers (or embedded or surplus x86 boxes with routing software loaded) offload the Mac boxes here, and are also typically easier to configure manage. And "real" IP routers can have hardware specific to efficiently routing packets. Use of an outboard firewall or firewall-router box also greatly simplifies gateway routing, too; it's a configuration that many folks and many businesses tend to use. -
Have 3 family members with three accounts. Homesharing is supposed to be set up all computers with the same (one) account. Then, will the content ONLY of the set account be shared? or will ALL content of those who sync with those computers be shared?
Products: (2) iPhones 4s, (2)iPad2, Apple TV, iPod, Dell PC with Windows 7.There's an issue currently that a lot of us are experiencing in that we all get the error message "iTunes is currently unavailable; please try later"
It's an issue with Apple and we're awaiting an update re this
I've posted a topic in regards to this after having a long conversation with Apple support this morning and will be receiving a call from their tech team tomorrow to run through it further
As it stands iTunes cannot be accessed via ATV's and nor can it be streamed via AirPlay from iTunes to the ATV
However I can access all films/iCloud content via my Mac Mini with no issues! -
Getting the offset of a placed PDF within the container rectangle
I need to get the offset of a placed PDF inside of the container rectangle. I have figured out that this information should be available in the transformationMatrix of the placed file. So I do something like:
var pdfTransform = pdf.transformValuesOf(CoordinateSpaces.pasteboardCoordinates)[0];
var horzTranslation = pdfTransform.horizontalTranslation;
var vertTranslation = pdfTransform.verticalTranslation;
but the coordinates I get back are just weird. The horizontal value seems reasonable, but the vertical is way off what I expect.
There may be some precondition to doing this that I'm missing. Running the pageitems/TransformValuesOf.jsx sample from the Scripting Guide also gives weird values. That sample creates a rectangle with a center point of [0, 0] and then retrieves the transform. I would expect the translation to be [0, 0] but I actually get [5, -415.95] (horz, vert).
In that sample it talks about ruler coordinates, so I tried setting document.viewPreferences.rulerOrigin to different values, but that does nothing.
I'm stumped. Can someone please give me a hint on what's going on here?Thanks Peter.
Some more info: I basically want to get the coordinates of the objects in a placed file in the coordinate space of the containing document. As an extra twist, the placed file is a PDF created from an InDesign document. So, I first extract the coordinates from that InDesign file, then the coordinates for the document that contains the placed PDF, and finally I merge the coordinates of the two documents as if all the objects were contained in a single document. This workflow is then used outside of InDesign to draw frames around all the object boxes on a JPEG created from the document containing the placed PDF.
Anyhow, to answer my own original question, this seems to work thus far:
rectOffset = containingRect.resolve(AnchorPoint.TOP_LEFT_ANCHOR, CoordinateSpaces.PASTEBOARD_COORDINATES)[0];
pdfOffset = pdf.resolve(AnchorPoint.TOP_LEFT_ANCHOR, CoordinateSpaces.PASTEBOARD_COORDINATES)[0];
horzTranslation = rectOffset[0] - pdfOffset[0];
vertTranslation = rectOffset[1] - pdfOffset[1];
That gives the same values as I can see in InDesign when selecting the placed PDF. So far so good ...
BUT, that is not enough! When placing a PDF using the default option of Crop to Bounding Box, I sometimes get a bit of extra margin (different for different documents) that offsets the translation values. I have no idea where this margin comes from but I need to compensate for it.
Please help! And let me know if this description is unclear so I can try to explain better. -
Dear Friends:
When I try to update my iPhone 3Gs thru iTunes, to the latest OS I receive an error message that says: "The net conection has been without any response within the limit of time.Please see your net settings or try later". I checked my internet settings and all is OK (I have not any proxy connection). I tried lots of time to do this update since some weeks till now and I always have the same error message. Please give me an answer about this problem because I cannot do anything more.
Best Regards
Joao Aguiar.Are you running modified software on your phone? This error seems to be common if the firmware has been modified and you're trying to restore the phone again.
-
I have three accounts set up in Thunderbird, two are unified and the third one isn't. I've looked through the setting in the tools-account settings for each of the three accounts but I cannot see anything that refers to unified folders. I have the view-folders button set to on.
I've seen a solution on your forums which reads:-
Help menu (Alt +H) > troubleshooting information Click the show folder button.
Close Thunderbird
open the mail folder open the smart mailboxes folder
Delete the inbox and inbox.msf files
Restart Thunderbird.
I don't understand why this solution should make all my inbox's unified, and I don't want to loose any emails.
Can anybody help please?
Response appreciated.Bonjour Crumbleey,
Excuse me, I don't understand your problem ... Can you describe it and tell me what you want to get ?
I have been using Thunderbirds for years now, I installed it in many PCs, I solved many problems using only the standard possibilities of Thunderbird, I never had any need to intervene in the emails files and folders.
If you want to delete an account which has its own set of folders, if you want to keep its emails, first move the emails in Local folders.
Pierre -
<blockquote>Locking duplicate thread.<br>
Please continue here: [[/questions/866940]]</blockquote>
I want the entire page to zoom in and out when I use CONTROL + mouse wheel. Now the letters get larger but remain in the same size paragraph and also the pictures stay the same.It is indeed scandalous that Apple sells useless scanned music scores. There is a warning when you chose to download music tabs or notes but it doesn't say that the score lines are very small and cannot be zoomed. I spent $30 on two books but cannot really use them on my MBA as you cannot zoom except for the double click which only works page per page and is only a small improvement.
The only way I can use the score more or less is on my ipad in landscape mode by increasing the font size to the max. The music score then becomes wider and you can read 2-3 lines per page without glasses.
If you could transfer the file to the pdf "side" of the library in ibooks the zoom would work..
What does work is using the accessibility zoom mode option+command+= to zoom and then option+command+\ to smooth the picture but then your whole display desktop etc. are zoomed in. -
hello
i write a java stored procedure,and put a line as "System.out.println(...)" within the procedure,after publish it,i can test it within the sqlplus by invoke following command:
SQL>set serveroutput on;
SQL>call dbms_java.set_output(....);
but when i test it within the jdeveloper9.0.3,it can't be print,why?
thank you!You can try this:
DBMS_OUTPUT.enable(100000);
DBMS_JAVA.set_output(100000);
HTH,
Robert -
How to bind all the components in a form to have the same property
i have a form with components and containers arriving from many objects to it fill up, and although there is not one line of code to change the font any where the font is sometimes bold and sometimes plain in different components, same components every time though.
so my question is:
what is the shortest way to bind the font property of all the component and sub-components added to the form to be the same one?[UIManager Defaults|http://www.camick.com/java/blog.html?name=uimanager-defaults]
-
Hellow everyone,
I have just moved from one PC to another. They are windows pc's not macintosh. When i installed itunes on the new computer it stated that I already had 5 devices authrorized for this account. I did a little reading and went in and deathorized all 5 PC from the account as I am sure it was a couple pcs ago and a few iphones. When I try and go in and authorize an account I cant see anywhere where there is a prompt to authorize the new PC. I go into store and all it says is that there are no devices associated to this account. What I would like to do is associate my new PC and my iphone to this account and hopefully restore from the cloud all of my music and programs.
Any idea what I am doing wrong here or how I can resolve this. Thanks in advance.
Respectully.
CKif it's music then drm is not used there any more and drm can be removed from previously bought drm material without cost
-
See Question.
Yes Ideato you are correct. It was just the "Menu Bar" selection. I am ashamed to say it took me quite a while to find that. But I did not find an answer in all the searches that I did. I would mark this as "Solved" but I do not see any way to do that. I can mark it as Helpful or post a reply but those are the only options I see.
-
Too long
This had no affect on my problem. Sorry, but no help at all. I can enter safe mode with nothing checked in the dialog and the problems go away. Any further ideas?
-
Does the CC Teams membership allow others within the company to utilize the apps?
I am the Marketing Coordinator for a small business and am very interested in purchasing the team subscription for Muse, Photoshop, Illustrator, etc. Although I would be the only member using these apps our company does use Adobe Acrobat across the board for various proposals and projects. Does the team subscription allow the other members (5) access to all of these apps (including Acrobat) as well for $69.99/mo. or do other subscriptions (i.e. single subscription of Acrobat per each member utilizing it) have to be purchased?
I've noticed on the CC page that it describes the team subscription as "Purchase Creative Cloud for teams complete and single app licenses for up to 150 people" but the pricing lists as "Complete: US$69.99/mo. (per license)". I'm just looking for some clarification on this.
Thank you in advance to anyone who is able to give me insight on this!This forum is more for individuals... Team license links that may help
-http://www.adobe.com/creativecloud/buy/business.html
-team plans https://creative.adobe.com/plans?plan=team
-manage your team account http://forums.adobe.com/thread/1460939?tstart=0 -
I am trying to find the serial number for Adobe CS2 within the program?
I want to locate the serial number for adobe CS 2 within illustrator or photoshop.
There is no such thing.
Mylenium
Maybe you are looking for
-
I'm tired of this problem of not being able to access itunes on my laptop and now no internet access despite connection and strength being excellent. What are windows playing at? Worked perfectly well until recently. Very frustrating and time consumi
-
Transferring my files from my 1.1 Mac pro to my new 5k iMac FireWire to lighting?
i Just ordered the replacement for my antique 1.1 version Mac Pro which is loaded with external FireWire hard drives as well as 3 internal 1 and 2 tearabyte and the one tearabyte SSD boot drive it is of course on 10.7.5 it also has a pair of apple ci
-
Hi pls help me with this speck.. very urgent...
REPORT zm_material_prodhier_update MESSAGE-ID zsd NO STANDARD PAGE HEADING LINE-SIZE 160. Tables TABLES: mara,mvke. Data Definitions. TYPES: BEGIN OF ty_mat, matnr
-
Unable to export report to excel file from SAP
Hi all, I have a problem to download data from a report. The XL gets downloaded in a different format than my colleague. We are using the same XL version but two weeks back the SAP GUI 730 got reinstalled to my machine and since then the problem st
-
DMS Error 26136 - File coule not be accessed
HI, I am facing this issue wherein a user is getting this error "File could not be accessed- Message 26136" when trying to open the original from SAPGUI. Also the lock is open in the SAPGUI but the DIR Change History (Environment--> Display changes)d