DMS Error 26136 - File coule not be accessed

HI,
I am facing this issue wherein a user is getting this error "File could not be accessed- Message 26136" when trying to open the
original from SAPGUI.
Also the lock is open in the SAPGUI but the DIR Change History (Environment--> Display changes)doesnt have any entry for
the checkout of the DIR.
I have gone through all the threads in SDN for this error but none of it seems to resolve our issue.
Any help is appreciated.
Thanks& Regards
Neha

Hi Christoph,
I referred the article on Wiki
http://wiki.sdn.sap.com/wiki/display/PLM/26136-Filecouldnotbe+accessed.
After debugging I realise that its failing in this code only but there are no exceptions occurring and the value of lf_exist is INITIAL only
IF pf_check_file = 'X'.
PERFORM doc_file_existence_check
USING space space
pf_file
CHANGING lf_exist.
IF lf_exist IS INITIAL.
MESSAGE e136 WITH pf_file RAISING file_not_found.
ENDIF.
The below code is returning INITIAL value for lf_rc but there are no exceptions thrown so I conclude that the parameter values in the DC20 should be fine.I have also checked the DC20 customisings and we are using "\" only .
Main Program SAPLCV120
Source code of LCV120F29
FORM DOC_FILE_EXISTENCE_CHECK
Check if file exists
lf_file = pf_file.
CALL METHOD cl_gui_frontend_services=>file_exist
EXPORTING: file = lf_file
RECEIVING: result = lf_rc
EXCEPTIONS: cntl_error = 1
error_no_gui = 2
wrong_parameter = 3
not_supported_by_gui = 4
OTHERS = 5.
IF lf_rc = abap_true.
Also its not getting into below code at all ... it throws the error b4 this only ... i placed a breakpoint here and it didn't get into it so I guess we cannot say anything abt SAPHTTP & SAPCMS connectins... NOT SURE...
Main Program   SAPLSCMS_HTTP                                               
Sourcecode of    LSCMS_HTTPU18                                               
FUNCTION         SCMS_HTTP_GET_FILE                                                                               
if frontend = 'X'.                                                         
    perform crep_check_bad using crep_id changing crep_is_bad.               
  endif.                                                                     
  if crep_is_bad = space.     <<<<<<< set Breakpoint                         
    perform perf_init.                                                       
    perform http_get_file                                                    
      tables response_headers                                                
      using crep_id absolute_uri path status_code status_text frontend t
The original that I am trying to open is showing lock open in SAPGUI but the change history doesnt have any entry for checkout.The storage category is also dispalyed correctly.
Hope this helps you to figure out whats happening.I am kind of lost because this error is not consistent and it occurs only sometimes....
Regards
Neha

Similar Messages

  • ERROR: file can not be accessed or does not exist

    I have a client online at this very moment that just went on and did all their page edits... about 2 hours of work for him.
    He went to save the file & received the error "...file can not be accessed or does not exist, Error" (no error number or anything. Here are the steps he took:
    Edit page
    Save ... received error
    Done... received same error
    Call me in panic
    Anyone???

    Hello Tommy,
    The editing session should not time out for 24 hours for a normal login. The period is even longer if “remember me” was checked at login... And if the session timed out, you should have been prompted with the login dialog, not thrown an error.
    I've sent you a private message regarding further troubleshooting.
    Best regards,
    Corey

  • Setup.exe file can not by accessed by system

    OS is WinXP Home SP3. When either installing complete all-in-one software from disc or downloaded rw2_021_w02_enu.exe, the install stops when trying to access Setup.exe "The File Can not Be Accessed from the System".Does anyone have a solution to this issue?

    Hi , and welcome to the HP Forums! I see you are having software errors.  I would like to help! I would recommend removing the ink cartridges from the printer, and perform a power reset.  Disconnect the power cord from the printer and the power outlet, then wait 60 seconds. After 60 seconds, plug the printer back in. Ensure you plug the printer directly to a wall outlet. Make sure to bypass any sort of surge protector or power bar. I would then suggest Uninstalling the Printer Software. Once it is uninstalled, I would suggest putting your system into clean boot mode within the Microsoft configuration.  You can do so by following this document: How to perform a clean boot in Windows. Once the computer is in clean boot mode, I would suggest reinstalling the HP Printer Install Wizard for Windows. Good luck and please let me know the results of your troubleshooting steps. Thank you for posting on the HP Forums!

  • Time Machine Error Message: "sparsbundle could not be accessed (error-1)

    hi,
    I am running snow leopard on my iMac and have a mac mini connected via ethernet running Mac Leopard Server version 10.6.
    I backed up my iMac onto my Mac Leopard Server using Time Machine about a year ago and then I turned it off and haven't done it since. I turned it on today and was attempting to back it up, but I keep getting the following Time Machine Error Message: "sparsbundle could not be accessed (error-1) when i try backing it up.
    Any thoughts on why and how to fix this? I can access my server via screen share, so i know its accessible and I can get online with it as well, so its connected to the Internet.
    Any ideas?
    Thanks,
    Josh

    jnp1 wrote:
    not backing up yet, but more progress than before...now its on an infinite loop of "preparing" and "scanning"...just keeps doing that over and over...but never actually backs anything up.
    Anything in the log files on either the client or the server?
    Usually, when Time Machine is being flaky, the easiest solution is just to delete the backup and start a new one. Since you have a server, you could just move that sparsebundle file elsewhere instead of deleting it. That is, of course, assuming you can still open it. If not, then it doesn't matter because that backup is toast.

  • Quicktime file error: 1 file(s) recognized, 0 access denied, 1 unkown

    Hey All,
    I'm trying to import a QuickTime file of a screen capture I took. In QuickTime player I went to file-new screen recording and created a .mov file of my screen. I saved it as a .mov file, a H.264 1080p .mov file, I tried re-exporting it as an Apple ProRes 422 .mov file, I tried saving it as a m4v file and nothing will import to FCP7. I get this error: "file error: 1 file(s) recognized, 0 access denied, 1 unkown"
    I read that if file is a reference and not self contained then it won't import, but I've saved it self contained many ways. I don't know what to do anymore, please help!

    FCP doesn't work natively with H.264, M4V, MP4 or other MPEG formats.  Try converting to ProRes again,
    -DH

  • Help!  File Error: 1 file(s) recognized, 0 access denied, 1 unknown.

    Hi folks,
    I just recently upgraded to Final Cut Studio and while my first week of working went smoothly, I'm now beginning to have a weird issue. Whenever I export a clip to work in motion without embedding the motion content, and then try and import the new motion file, I get the following error message:
    File Error: 1 file(s) recognized, 0 access denied, 1 unknown.
    I'm using the standard steps to export and import the clip, and what's more I was initially able to do it with no problem. I've already downloaded all the relevent updates, and I've also tried creating a test user. The test user gets the same result. Even weirder, occasionally (though not everytime) despite giving me that error, I will discover that the video layer did import as it's own sequence instead of as a clip, and with none of the motion elements.
    My apps are installed on a PowerMac G5 DualCore 2.3 GHZ, I have a gig of ram, and my scratch disk is an external dedicated Firewire drive.
    Motion files will import if they originated in motion with no video layer, but that's kind of a drag when the whole point of having all these apps in one box is to be able to keep your workflow streamlined.
    I've seen other posts with error message, but I couldn't find any answers. Any help would be greatly appreciated.
    Thanks,
    Avi
    PowerMac G5, DualCore 2.3 GHZ Mac OS X (10.4.5) Final Cut Studio
    PowerMac G5, DualCore 2.3 GHZ   Mac OS X (10.4.5)  

    The only other things I can think of are: 1) try re-installing QuickTime by deleting the QuickTime related receipts (In /Library/Receipts) downloading the installer from http://www.quicktime.com/ and running it... and 2) have you done the "Pro Apps" update? Search the Motion Forum for a link. Which brings me to my final thought - ask your question there. You'll find more Motion experts there that may offer new thoughts...
    Patrick

  • File Error: 1 file(s) recognized, 0 access denied, 1 unknown • PLEASE HELP!

    This is REALLY hurting business as nothing seems to work. I wll explain what is going on. When i attempt to log a clip, the clip doesn't show up in the bin. When i do a capture now, the clip doesn't show up in the bin, but when i look at the Final Cut Pro Documents/Capture Scratch folder the clip is there. If i try to drag the clip in the bin i get the error message (File Error: 1 file(s) recognized, 0 access denied, 1 unknown). Our system has the AJA i/O and a KONA LHe card. I have removed the KONA LHe card, and i did not plug back in the connections for the XSERVE RAID. I am now zeroing out the drive (FRESH FACTORY REINSTALL), and i have installed Final Cut Studio 2 first, but i made all of the software upgrades first. Even when i did that i still got the error message "File Error: 1 file(s) recognized, 0 access denied, 1 unknown." Can someone please help me as i have a commercial due tomorrow and as it stands i am SCREWED! I'm sure that you feel my pain, but nothing is working. It won't let me import any file from any drive because i will get the error message "File Error: 1 file(s) recognized, 0 access denied, 1 unknown"

    Installation is complete on all of the updates and i installed Final Cut Studio 2. I still have not hooked up my Lacie drives (2 500 GB drives stripped to 1TB RAID), and i have not hooked back up my XSERVE RAID. I opened Final Cut and used my second internal drive and imported in audio from that drive. IT WORKED! Now i need to hook up the Lacie drives and see if i can import something from that drive. I have not installed the AJA i/O drivers yet. Trying to go one step at a time to see what is happening. Please advise someone.

  • RW-00023: Error:  DBC file was not created- When try to install 11i on OEL5

    I got an erorr in the appl-top log file as below, also my installation wizard showing post installation checks did not succeed. Please advice.....:-)
    DBC File Check
    RW-00023: Error: - DBC file was not created:
    File = /d01/oracle/visappl/fnd/11.5.0/secure/VIS_oracleapp1/vis.dbc
    HTTP Check
    checking URL = http://oracleapp1.srini.co.uk:8000
    RW-50015: Error: - Portal is not responding. The service might not have started on the port yet. Please check the service and use the retry button.
    RW-50015: Error: - Portal is not responding. The service might not have started on the port yet. Please check the service and use the retry button.
    JSP Check
    checking URL = http://oracleapp1.srini.co.uk:8000/OA_HTML/jsp/fnd/fndhelp.jsp?dbc=/d01/oracle/visappl/fnd/11.5.0/secure/VIS_oracleapp1/vis.dbc
    RW-50015: Error: - JSP is not responding. The service might not have started on the port yet. Please check the service and use the retry button.
    PHP Check
    checking URL = http://oracleapp1.srini.co.uk:8000/OA_HTML/US/ICXINDEX.htm
    RW-50015: Error: - Login Page is not responding. The service might not have started on the port yet. Please check the service and use the retry button.
    JSP Check
    checking URL = http://oracleapp1.srini.co.uk:8000/OA_HTML/jsp/fnd/fndhelp.jsp?dbc=/d01/oracle/visappl/fnd/11.5.0/secure/VIS_oracleapp1/vis.dbc
    RW-50015: Error: - JSP is not responding. The service might not have started on the port yet. Please check the service and use the retry button.
    PHP Check
    checking URL = http://oracleapp1.srini.co.uk:8000/OA_HTML/US/ICXINDEX.htm
    RW-50015: Error: - Login Page is not responding. The service might not have started on the port yet. Please check the service and use the retry button.

    Hi JD,
    I am able to fix this issue.....:-) Thanks for your help JD.
    As per the Metalink note 747424.1, i replaced all occurances of LD_ASSUME_KERNEL with XD_ASSUME_KERNEL only in DB-tier, but not in the Apps tier. So this was causing the
    above issue in the instalation of oracle 11i on OEL5
    --Once again i alter and replaced all occurances of LD_ASSUME_KERNEL with XD_ASSUME_KERNEL in both the files....
    (db tier)
    <DB_HOME>/appsutil/bin/adgetlnxver.sh (did it earlier)
    (apps tier)
    <APPL_TOP>/ad/11.5.0/bin/adgetlnxver.sh
    --run  the autoconfig in apps tier with completed successfully result (and also generated the  DBC files)
    --run the adstrtal.sh and retry the rapidwiz once more. ( Oracle Discoverer services VIS_oracleapp1 - addisctl.sh - this one is Failed)
    --This time everything checked OK in the instalation wizard.                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                           

  • HTTP Error 404 :File does not exist

    Hi all,
    On Test instance we are not able to open the help file,it give an error
    HTTP Error 404 :File does not exist
    can anybody have solution for this
    it's very urgent
    Thanks
    shekhar

    I have changed the note server definition in the external app to add the mail directory in front of the mail file name 'mail/mufile.nfs' and I get the following error:
    05/04/21 15:15:07 lotusnotes: [instance=(null), id=97176201941,7] ERROR: LotusServiceSession: getConfigProperties(): An error occured
    while reading/ retrieving the properties from the the configuration file.
    05/04/21 15:15:07 lotusnotes: [instance=(null), id=97176201941,7] ERROR: Unhandled exception in SOAP call
    oracle.portal.provider.v2.ProviderException: LotusServiceSession: getConfigProperties(): An error occured while reading/ retrieving the
    properties from the the configuration file.

  • ITunes will no longer play my music, all the albumss are there but it if I click on a song to play it I get a message saying " The song (name of song) could not be played because the original file coul not be found. Would you like to locate it."

    iTunes will no longer play my music, all the albumss are there but it if I click on a song to play it I get a message saying " The song (name of song) could not be played because the original file coul not be found. Would you like to locate it."

    You get this message because  iTunes can’t find the file. This can happen for a number of reasons:
    The song file or a folder in its path was renamed
    The song file or the folder it is in has been moved
    The song file has been deleted
    The device containing the song files e.g. external drive is not accessible or the drive letter has changed.
    Do any of these aply to you?

  • When i download any file it start in a second but when i pause the downloading file & after some time when i open it amessage flash 'download error' source file could not be read please try again later or contact the server administrator.

    when i download any file it works frequently and downloading start in a second but when i pause the downloading file & after some time when i open it,The downloading not start proper and after some time a message flash 'download error' source file could not be read please try again later or contact the server administrator.

    I downloaded the Microsoft Autoruns package and ran it.  There are no programs in the LSA Providers tab, and Apple's Bonjour is the only program in the Winsock Providers tab.  I also did the "netsh winsock reset" and rebooted.  It didn't fix the problem.  Any more ideas?

  • Getting error logical file name not maintained adequtely

    Hi,
    when i execute a z report and press the download botton getting error logical file name not maintained adequtely,see long text.
    Below code i wriien. Please somebody help..
        DATA: lt_rows TYPE lvc_t_row.
        CASE e_ucomm.
          WHEN 'DOWNL'.
    Determine and construct OS specific file name                        *
            PERFORM get_file_name_for_os.
    in the  above perform , i wriien
    FORM build_file_name USING pf_os
                               pf_with_file_extension
                               pf_param_1
                               pf_format
                               pf_fname.
      DATA: lf_para1(20) TYPE c.
    pf_param_1 hold the materialnr with leading zeros not prefered in    *
    download file name                                                   *
      WRITE pf_param_1 TO lf_para1.
      CALL FUNCTION 'FILE_GET_NAME'
        EXPORTING
      CLIENT                        = SY-MANDT
          logical_filename              = 'Z_MATERIAL_BOM_FILE'
          operating_system              = pf_os
          parameter_1                   = lf_para1
      PARAMETER_2                   = ' '
      PARAMETER_3                   = ' '
      USE_PRESENTATION_SERVER       = ' '
          with_file_extension           = pf_with_file_extension
      USE_BUFFER                    = ' '
        IMPORTING
      EMERGENCY_FLAG                =
        file_format                   = pf_format
        file_name                     = pf_fname
    EXCEPTIONS
       file_not_found                = 1
       OTHERS                        = 2
    Error handling.
      CASE sy-subrc.
        WHEN '1'.
          MESSAGE e014(ba) WITH 'Z_MATERIAL_BOM_FILE'.                     "error message i am getting      LEAVE.
        WHEN '2'.
          MESSAGE e213(ky) WITH 'Z_MATERIAL_BOM_FILE'.
          LEAVE.
      ENDCASE.

    Hi.
    In file txn,
    click on "Logical File Name Definition, Cross-Client" from the left.
    Then click position and check for your logical file name.
    If you dont get it, it means you need to create it. You can click on New Entries to create.
    Thanks
    Mani

  • Has anyone had the error "The file could not be read due to an error" when selecting ignore or replace image links. The linked images are in Dropbox if that helps.

    I am working on a Mac 10.9.5 with Adobe CS6. My files are locally in Dropbox but once we moved files to network and tried opening the AI - the file would not recognize the original folder location. I tried ignoring the missing images but then I receive the error - The file could not be read due to an error." The same error happens when I try replacing the first missing image. I know the problem lies in the images are linked back to my Dropbox but the AI file doesn't care since it won't let me replace or ignore the image links.

    Jasion,
    Maybe a bit beside the question, but it is always recommended here to open/save from/to own hard disk, and to copy from/to networks and removable media. You may be lucky, at least for a while, but it is better to be safe than sorry.
    In addition to the (far greater) risk of file corruption, some issues are mentioned here:
    http://helpx.adobe.com/illustrator/kb/illustrator-support-networks-removable-media.html

  • Has anyone had the error "The file could not be read due to an error" when selecting ignore or replace? The linked images are in Dropbox if that helps.

    I am working on a Mac 10.9.5 with Adobe CS6. My files are locally in Dropbox but once we moved files to network and tried opening the AI - the file would not recognize the original folder location. I tried ignoring the missing images but then I receive the error - The file could not be read due to an error." The same error happens when I try replacing the first missing image. I know the problem lies in the images are linked back to my Dropbox but the AI file doesn't care since it won't let me replace or ignore the image links.

    Jasion,
    Maybe a bit beside the question, but it is always recommended here to open/save from/to own hard disk, and to copy from/to networks and removable media. You may be lucky, at least for a while, but it is better to be safe than sorry.
    In addition to the (far greater) risk of file corruption, some issues are mentioned here:
    http://helpx.adobe.com/illustrator/kb/illustrator-support-networks-removable-media.html

  • Error - Server file should not be empty- while uploading Text files in RAR

    Hi,
    We are uploading SU24 text files but we are getting the error "Server file should not be empty" while uploading the Description files in RAR 5.3
    We followed the same naming covention and also used UTF-8 format for the text files. We placed the file in our Desktop as well and tried uploading into RAR - but still the same error is being thrown?
    Are we missing something here?
    Thanks and Best Regards,
    Srihari.K

    Hi and thanks to the answers so far.
    I forgot to mention some points :
    - I'm using forground import
    - we are trying to use RAR to run risk analysis on non-sap systems as well as SAP (single or cross-systems).
    So the file I'm trying to upload does not come from a SAP backen, but was created from scratch.
    However the data in the files are coherent (and I compared with a SAP extraction, the format is the same)
    here is a sample of the file I try to upload : (an that is actually what I'm trying to import as a test file)
    sap_auth.txt:
    OEITIAC     GTIAC     SEL     1     
    OEITIAC     GTIAC     MOD     1     
    OEITIAC     GTIAC     INS     1     
    OEITIAC     GTIAC     SUP     1     
    each element (ACT/PRM/FLD/VAL) is defined in the sap_desc.txt file that I loaded first (without error).
    note that each column is separated by a single TAB (with an empty column at the end of each line).
    each line is terminated by a CR/LF
    I tried UTF-8 with and W/O BOM
    Regards,

Maybe you are looking for