Disable/Grey out all objects on the FP.

Is there a VI or an invoke node method that disables & enables all controls in the FP? I know you can use control refs for all the FP ojects but maybe you know of an alternative.
I am using an event stucture that fills a queue. When my queue gets full it waits for a dequeue before it can enqueue this locks/block my ES therefore I need to freeze the FP when the queue is 90% full. I would not like to use an enqueue timeout so freezing avenues that trigger an enqueue is the elegant way out.

I think I will be able to solve this problem using the example "Locking Front Panel Controls".
thanks

Similar Messages

  • How to disable (grey-out) the ticks of a JSlider?

    Hi everyone,
    In my GUI, I have a JSlider that I want to be disabled (greyed out)
    because it should be only actived on my application next version.
    (It is important though to have it to preserve GUI appearence).
    Problem is that I was unable to greyout the ticks even though
    already managed to grey out the slider and the number labels.
    Right now, it is pretty uggly to have a partial disabled slider,
    because due to ticks not being disabled.
    Questions:
    1) Does anyone have an idea of how to do it?
    A small part of my code is shown below:
    JSlider dynSl = new JSlider();
    dynSl.setMajorTickSpacing(1);
    dynSl.setValue(0); //Default
    dynSl.setMaximum(7);
    dynSl.setMinimum(0);
    dynSl.setPaintLabels(true);
    dynSl.setPaintTicks(true);
    dynSl.setFont(new java.awt.Font("Dialog", 0, 9));
    dynSl.setSnapToTicks(true);
    dynSl.setEnabled(false);
    // small code just to put the numbers of the slider smaller
    Enumeration enum = dynSl.getLabelTable().elements();
    while (enum.hasMoreElements()) {
    JLabel elem = (JLabel)enum.nextElement();
    elem.setFont(new Font("Dialog",0,8));
    elem.setEnabled(false);
    2) If not possible, how do I change the colour of a JSlider (including
    the Ticks)?
    My idea is to change Slider's colour to the same grey colour one used
    to disable it, making at the end the slider look as if it was disabled.
    Thanks in advance,
    Jorge

    Hi again,
    Thanks for the help.
    I was trying to avoid not having the ticks at all but it seems to be
    the best choise because I could not solve the problem of greying out
    them.
    I did some more troubleshooting though and for my surprise, if I use
    the same code alone, i.e, a simple frame with just the slider it works
    fine. I even thought that it was related with having Windows LnF as
    opposed to Metal (Java) LnF, but that was not the problem.
    The only thing it comes to mind, is that there may be some problem by including the slider on a GridBagLayout !?!?!?
    Anyway,
    What has no simple solution, solved is! :-)
    Jorge

  • BADI/user exit for me22n - disable/grey out field quantity (MEPO1211-MENGE)

    Dear all SAP gurus,
    When changing PO (ME22N), I need to disable (grey out) the quantity field on item (MEPO1211-MENGE), when all scheduled quantity is already received (EKET-MENGE = EKET-WEMNG).
    Have tried using LMEIGICJI and Handle_event method in CL_SCREEN_VIEW_MM. But still doesn't go to the screen that wants to be disabled.
    Tried using BADI ME_PROCESS_PO_CUST, but couldn't find how to disable the quantity field.
    (IF_EX_ME_PROCESS_PO_CUST~FIELDSELECTION_ITEM only works for custom field).
    Please kindly advise
    thanks in advance

    Hi Ahmad,
    No need of ABAP, follow this IMG Path.
    Material Management -> Purchasing - Purchase Order ->  Define Screen Layout at Document Level
    After Executing it . Choose ME22 from list and then choose display icon.
    than double click Quantity and Price here uncheck opt. Entry and check display.
    save your work.
    Hope this works.
    Regards
    Ahsan

  • Adding a track when out of Objects in The Environment

    Hi,
    I use GarageBand 2 (GB2) to get the idea down quickly when the inspiration strikes. It works perfectly for that purpose. To take a song from that initial idea to the finished product, I import the song into Logic Pro 7.1.1 (LP7).
    All in all, LP7 is a very good-, comprehensive- and versatile product, but the one thing that keeps frustrating me beyond belief is "The Environment". I have read and re-read the documentation on "The Environment" several times, but I just hit a road block every time I need to add a track if I'm out of objects in The Environment (Audio, Midi or Audio Instrument). When I choose "Track -> Create With Next Instrument" and there is no "Next Instrument" left, I'm stuck.
    My current workaround is that I add plenty additional "Real Instrument" and "Soft Instrument" tracks in GB2 before importing the song into LP7. The import routine takes care of setting up The Environment. But sometimes I don't add enough tracks and then I'm stuck again.
    Can anyone suggest a reasonably straight forward way of adding a track once you're out of objects (Audio-, Midi- or Audio Instrument) in The Environment, please?
    Thx & brgds,
    ...tt

    Well, I've tried both of those and that's where the problems arise.
    If I do "Track -> Create Multiple..." I get the error message "No more tracks available".
    If I create an Audio Object in the Environment, double-click on its icon to transform it into a channel strip, and then try to assign the desired channel, only the channels that are already taken appear in the pull-down menu. If I go back to the Arrange Window and choose "Track -> Create" a new track is created given the same name and linked to the same Audio object and channel as the previously last Audio track. Going back to The Environment I still only have the same channels as before to choose from.
    In GB2, in Cubase and in Sonar all you have to do is create a new track and choose whether you want it to be an Audio track or a Midi track. I just don't get why it has to be so complicated in Logic?
    What am I doing wrong?
    ...tt

  • Help needed. I have a 3TB external hard drive partitioned into 1TB's. I used one partition as backup for the main computer hard drive. But now it is greyed out as shown in the disk utility and its name changed, i dont know how that happened, i tried verif

    Help needed. I have a 3TB external hard drive partitioned into 1TB's. I used one partition as backup for the main computer hard drive. But now it is greyed out as shown in the disk utility and its name changed, i dont know how that happened, i tried verifying and repairing it but had no luck. I also tried mounting and unmounting it but still no solution. Anyone to help please?

    Looks bad. I would strongly advise backing up the stuff on the other two partitions as soon as possible in case the rest of the drive goes wrong.
    Beyond that, Disk Utility has limited abilities to repair disks, DiskWarrior uses a different approach and might, emphasis might be more successful. It has certainly done the job for me in the past when Disk Utility could not.
    See http://www.alsoft.com/diskwarrior/

  • Undable to drop tablespace ORA-01561: failed to remove all objects in the

    hi,
    i am unable to drop table tablespace how can i do that??
    please advise
    DROP TABLESPACE tbs_tp2 INCLUDING CONTENTS AND datafiles
    ERROR at line 1:
    ORA-01561: failed to remove all objects in the tablespace specified
    Thanks in advance
    siva
    chennai

    Have you tried dropping the objects individually? You can see which objects still belong to this tablespace by using the DBA_SEGMENTS view as shown below:
    SELECT OWNER, SEGMENT_NAME, SEGMENT_TYPE, TABLESPACE_NAME
    FROM DBA_SEGMENTS
    WHERE TABLESPACE_NAME=tbs_tp2;HTH!

  • When releasing a transp. req.not all object in the request could  be locked

    When trying to release a transport request I get error message that "not all object in the request could  be locked. Do you want to release them anyway"
    I found an unreleased request (from someone else) containing few objects from my request. However I do not know the owner of that request (and I can not felete it). What to do?
    If I release the transport anyway what could happen?

    Hi Tina,
    If ur sure that u only want to release object which u have created and not the other objects then proceed in following way.
    1. Go to SE10 and click on create button
    2. u will get a popup select the 3rd radio button(ToC)
    3 Give the decsription of the Tp
    4. u will get  anext screen here in menu select request
    task->object lise ->Include object (new screen) here u select radio button freely selet obkect -> then new screen then selected the radio button selected objet. Here u give ur object and those object will be store in the created request then u can transport
    Regard
    Anees Ahned

  • List of all objects in the data dictionary

    How to capture the list of all objects in the data dictionary named like PSDFDI and verify they are granted to the FDIREADR role

    See the database security guide http://docs.oracle.com/cd/B28359_01/network.111/b28531/authorization.htm#BABFHBFH
    Finding Information About User Privileges and Roles
    This section discusses the system views that have the grant information.
    The tricky part of this is that because roles can be granted to other roles the data is hierarchical.
    So start with the grants made to the FDIREADR role. So referring to the doc above;
    select * from role_role_privs where role = 'FDIREADR'will list the roles granted to your role.
    You will want to look at ROLE_ROLE_PRIVS, ROLE_TAB_PRIVS and ROLE_SYS_PRIVS.
    I suggest you walk thru the views manually to see how the information is related. Then write a test script that queries the views for you.

  • Grey-out button dynamically in the application toolbar

    Hi,
    How can I grey-out button dynamically in the application toolbar?
    It's not an ALV grid, where it's easy.
    SET PF-STATUS '100' EXCLUDING 'SOMETHING'. hides completely the button.
    Thanks,
    Peter

    Hi,
    Sorry forgot to add something to my previous reply...
    The complete steps will be as follows :
    1. Create Two PF status , One with active Button and Function code and Second with Inactive Function code and Greyed button (This can be acheive by using Push Button assignment as specified in the thread)
    2. Dynamically change the PF status to Second one when you want to deactivate the specified Function from the application tool bar.
    regards,
    Sumeet Mishra
    Reward point if this helps : )

  • TS1398 My iPhone 4s will no longer pick up or connect to any WiFi network. The WiFi button isn't greyed out or dimmed but the phone won't pick up any of the networks I have been connected to. I have updated to iOS 7, reset the network settings but no luck

    The WiFi button is not greyed out or dimmed but the phone won't pick up or connect toany of the networks I have previously been connected to. I have updated to iOS 7, reset the network settings but no luck. Any suggestions?

    If it's grayed out:
    Reset Network Settings - if that doesn't fix it, then Backup and Restore AS A NEW DEVICE.
    If it's still grayed out, unfortunately that means your Wi-Fi antenna quit, and it needs service.

  • Transport Release Error: Not all objects in the request could be locked.

    Hi all!
    I hope you can help me with this one.
    We need to transport a particular request in our QA and Production client. However, upon releasing of the transport request number, a warning/error message appeared on the screen:
    'Not all objects in the request could be locked. Do you want to release anyway?'
    I tried to display the error and below is the object messages:
    Object messages: R3TR TABU ZLIFNR
    Task F5DK900107 belongs to a different category
    I don't know what that means, but I noticed that there are too many objects under the customizing task which I think is not part of the latest customization. I'm not sure what to do, I hope somebody could give me some advise.
    Thank you very much.
    Regards,
    April

    Hi!
    There are many IMG activities under that same request which is not supposed to be transported to QAS. Is it possible to transfer the IMG activity and other customization into a new transport request? if possible, how?
    I'm thinking if I can just try to change/save again the new configuration to a new transport request number. But if there's an easier way to solve this problem, I will consider that option.
    =) Thank you...

  • Unable to group objects - it's greyed out all the time

    Hello,
    I am using Page's 09 (version 4.0.3 build 766). I have a document with many self made graphics using text boxes, shapes and connection lines. No matter what, I can not select group objects. If I select two, three, four, or more it is always greyed out.
    Is this a nasty issue with Pages? Anyone else experiencing this?
    - Aaron

    Sorry, Aaron, I must have been seeing fruhulda's equipment profile and thinking it was yours.
    Well, there have been an incredible number of manifestations of problems with iWork and the 10.6.2 incremental update. I wonder if there are any other issues that you may not have mentioned because they don't seem related to this one.
    As Yvan says, what you want to do is something that works well on a properly functioning system. All manner of things have gone wrong for those who have installed 10.6.2.
    I haven't installed 10.6.2, so I don't have first hand experience with this, but posts indicate that you must have a properly updated iWork first, and then do the Combo Update. After that you hold crossed fingers behind your back, or something like that.
    Jerry

  • Want to disable/"grey out" dial-up connection "settings" button in the "connections" tab of Internet Options

    Hi, I'm looking to "grey out" a dial-up connection for some users in workplace, so that they are forced to use our VPN client in order to access the web. Does anyone know if this is possible?
    I know you can disable all settings on that tab using local group policy, (e.g. Administrative Templates\Windows Components\Internet Explorer) but I only want to disable a specific dial-up connection (for usb 3G modems).
    I've read of various IE settings being locked down in the registry here, HKEY_CURRENT_USER\Software\Policies\Microsoft\Internet Explorer\Restrictions, but havent seen the settings I want.
    The actual connection is visible here, HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Internet Settings\Connections, I just cant figure out how to grey it out. Any ideas? Thanks!

    http://technet.microsoft.com/en-us/library/cc732613(v=WS.10).aspx
    The following Group Policy settings can be edited and applied to users that are members of the Group Policy object (GPO) in which the Group Policy setting is included. By default, the Group Policy settings are not configured.
    Prohibit deletion of remote access connections. If you enable this Group Policy setting, then affected users cannot delete any remote access connections, including those they create themselves.
    Prohibit access to the Remote Access Preferences item on the Advanced menu. If you enable this Group Policy setting, then affected users cannot access the
    Remote Access Preferences setting on the Advanced menu of the Network Connections folder. The top menu bar, including the
    Advanced menu, appears when you press the ALT key.
    Prohibit access to properties of a LAN connection. If you enable this Group Policy setting, then affected users cannot change any of the properties of a LAN connection.
    Ability to change properties of an all user remote access connection. If you enable this Group Policy setting, then affected users can modify the properties of a remote access connection that is shared with the other users on the computer.
    By default, standard users can only modify properties for a connection that is not shared.
    Prohibit connecting and disconnecting a remote access connection. If you enable this Group Policy setting, then affected users cannot connect by using any remote access connection, or disconnect any that are currently connected.
    Prohibit changing properties of a private remote access connection. If you enable this Group Policy setting, then affected users cannot change the remote access connection properties that are not shared. By default, standard users can modify
    connections that are not shared.
    Prohibit renaming private remote access connections. If you enable this Group Policy setting, then affected users cannot rename remote access
    connections that are not shared. By default, standard users can modify connections that are not shared.
    Rob^_^

  • Disable/Grey out a row in ABAP Objects

    HI,
    I have a reqmt where in which in the report -
    when check box display BOM is checked only BOM components needs to be displayed in the output but should not allow user to select the row and make changes by pressing anybutton.
    The display rows should get greyed out. How to achieve this functionality thru ABAP objects.
    Thanks

    Hi Namit,
    Open the particular page , and select dynamic navigation (from the right hand side corner Display drop down menu ) .
    U will get all the links which r there in the detailed navigation.
    and uncheck the visible property .
    Surekha.

  • Tiger - All Sahring Options/Services disabled, greyed out

    Hello from Portugal!
    I noticed that on System Preferences I had all my Sharing services disabled and cannot select any of them (greyed out). Also, the Firewall Tab was disabled to (greyed out), and I couldn't select it either. I noticed that as the first option (also greyed out) I had a new service called "M82" ( ? ) that I had never seen before.
    1- So I did a Archive and Install from Tiger 10.4.0 original DVD to try to find out what update cause this strange behavior.
    2- After that I updated from 10.4.0 to 10.4.11 (Combo update) with Software Update.
    3- After that I checked the Sharing services and all was well and normal. I could select/activate all the Sharing Option and the Firewall Tab was back to normal again.
    4- I returned to Software Update and Made the folowing updates/instalations:
    . Java 1.3.1 and 1.4.2 Release 2 (2.0)
    . QuickTime (7.6)
    . Migration and DVD/CD Sharing (1.1)
    . Safari 3.2.1
    5- After the restart I checked again and all my Sharing services and Firewall Tab were once again disabled. Also, the mysterious new service "M82" (also disabled) was back again.
    So the cause of this problem is one (or more) of the updates I made in step 4 (maybe not Safari 3.2.1).
    What can I do to resolve this issue without having to install Tiger 10.4.0 again?
    Thank you for your help!
    pedro
    Message was edited by: Pedro Taquelim

    Thanks for your help BDAqua,
    I modified my system language from Portuguese (Portugal) to english an all got back to normal.
    altought it's a solution to resolve this specific problem, it's forces me t use english instead of my mother language. Not wise. I'm going to contact Apple to fix this.
    Thanks again!
    pedro

Maybe you are looking for