Transport Release Error: Not all objects in the request could be locked.

Hi all!
I hope you can help me with this one.
We need to transport a particular request in our QA and Production client. However, upon releasing of the transport request number, a warning/error message appeared on the screen:
'Not all objects in the request could be locked. Do you want to release anyway?'
I tried to display the error and below is the object messages:
Object messages: R3TR TABU ZLIFNR
Task F5DK900107 belongs to a different category
I don't know what that means, but I noticed that there are too many objects under the customizing task which I think is not part of the latest customization. I'm not sure what to do, I hope somebody could give me some advise.
Thank you very much.
Regards,
April

Hi!
There are many IMG activities under that same request which is not supposed to be transported to QAS. Is it possible to transfer the IMG activity and other customization into a new transport request? if possible, how?
I'm thinking if I can just try to change/save again the new configuration to a new transport request number. But if there's an easier way to solve this problem, I will consider that option.
=) Thank you...

Similar Messages

When releasing a transp. req.not all object in the request could be locked

When trying to release a transport request I get error message that "not all object in the request could be locked. Do you want to release them anyway"
I found an unreleased request (from someone else) containing few objects from my request. However I do not know the owner of that request (and I can not felete it). What to do?
If I release the transport anyway what could happen?

Hi Tina,
If ur sure that u only want to release object which u have created and not the other objects then proceed in following way.
1. Go to SE10 and click on create button
2. u will get a popup select the 3rd radio button(ToC)
3 Give the decsription of the Tp
4. u will get anext screen here in menu select request
task->object lise ->Include object (new screen) here u select radio button freely selet obkect -> then new screen then selected the radio button selected objet. Here u give ur object and those object will be store in the created request then u can transport
Regard
Anees Ahned

Error in File UNKNOWN.RPT: The request could not be submitted for backgroun

I receive: Error in File UNKNOWN.RPT: The request could not be submitted for background processing.
The error is on a windows Server 2008 SP2 production server. The report generates fine if I run it from within Visual studio 2008 on the server but not through IIS. The Crystal Reports is the version that came with vs2008 (10.5).
Initially I was getting unauthorized access errors so I granted full access to everyone for the bin and managed crystal report folders under program files. This fixed the unauthorized access problem but now I get the background processing error. I also tried to inpersonate an admin account with the same result. I tried to copy the crystal reports dll's to the bin folder for the project but that did not help either. I am running out of ideas. I did notice that a 16kb rpt file is generated in the Windows/temp folder every time I try to run the report.
the crashing page is here Link:[http://futuretechgroup.com/cgi-bin/crystaltest.aspx]
Here is the event log:
Event code: 3005
Event message: An unhandled exception has occurred.
Event time: 5/24/2010 12:24:56 PM
Event time (UTC): 5/24/2010 7:24:56 PM
Event ID: 87ee3d9297fb409ea7b440b059a0f07d
Event sequence: 4
Event occurrence: 1
Event detail code: 0
Application information:
    Application domain: /LM/W3SVC/5172/ROOT-1-129192026961318172
    Trust level: Full
    Application Virtual Path: /
    Application Path: C:\inetpub\vhosts\futuretechgroup.com\httpdocs\
    Machine name: FTG2009
Process information:
    Process ID: 3644
    Process name: w3wp.exe
    Account name: FTG2009\IWPD_1(yanoshftg)
Exception information:
    Exception type: CrystalReportsException
    Exception message: Load report failed.
Request information:
    Request URL: http://futuretechgroup.com/cgi-bin/crystaltest.aspx
    Request path: /cgi-bin/crystaltest.aspx
    User host address: 70.173.237.72
    User:
    Is authenticated: False
    Authentication Type:
    Thread account name: FTG2009\IWPD_1(yanoshftg)
Thread information:
    Thread ID: 5
    Thread account name: FTG2009\IWPD_1(yanoshftg)
    Is impersonating: False
    Stack trace:    at CrystalDecisions.ReportAppServer.ReportClientDocumentWrapper.EnsureDocumentIsOpened()
   at CrystalDecisions.CrystalReports.Engine.ReportDocument.Load(String filename, OpenReportMethod openMethod, Int16 parentJob)
   at CrystalDecisions.CrystalReports.Engine.ReportDocument.Load(String filename)
   at cgi_bin_CrystalTest.CreateReport() in C:\inetpub\vhosts\futuretechgroup.com\httpdocs\cgi-bin\CrystalTest.aspx.vb:line 15
   at cgi_bin_CrystalTest.Page_Load(Object sender, EventArgs e) in C:\inetpub\vhosts\futuretechgroup.com\httpdocs\cgi-bin\CrystalTest.aspx.vb:line 9
   at System.Web.UI.Control.OnLoad(EventArgs e)
   at System.Web.UI.Control.LoadRecursive()
   at System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint)

1. The OS is 32bit
2. Yes. The C drive is the primary drive
3. For the sake of simplicity and to troubleshoot the sample code has no datasource just 'Hello' in the report header. The Actual work order report that I need has ADO as datasource and it builds a PDF report without any problems when I run the page from VS2008 (development server) so I think the dll's are where thay are supposed to be. The c:\windows\assembly folder has about 25 CrystalDecisions files (10.5.37).
Do I still need to create a deployment package even though I have everything else working?
Below is the code I am using to create the report
    Sub CreateReport()
        Dim myReport As New ReportDocument
        'Try
        myReport.Load(Server.MapPath("CrystalReport.rpt"))
        'Catch ex As Exception
        'MsgBox(ex.InnerException.ToString)
        'End Try
        Dim g As Guid = Guid.NewGuid
        Dim woPath As String = "../FileTemp/" & g.ToString & ".pdf"
        'Try
        Dim CrExportOptions As ExportOptions
        Dim CrDiskFileDestinationOptions As New _
        DiskFileDestinationOptions()
        Dim CrFormatTypeOptions As New PdfRtfWordFormatOptions()
        CrDiskFileDestinationOptions.DiskFileName = _
                                    Server.MapPath(woPath)
        CrExportOptions = myReport.ExportOptions
        With CrExportOptions
            .ExportDestinationType = ExportDestinationType.DiskFile
            .ExportFormatType = ExportFormatType.PortableDocFormat
            .DestinationOptions = CrDiskFileDestinationOptions
            .FormatOptions = CrFormatTypeOptions
        End With
        myReport.Export()
        'Catch ex As Exception
        'MsgBox(ex.ToString)
        'End Try
        Response.Redirect(woPath)
    End Sub

Error: The request could not be submitted for background processing

I'm getting an intermittent error in our custom reporting application using Crystal Reports Server XI R2 w/ SP1:
Error in File C:\WINDOWS\TEMP\{F6D30537-956A-458C-96D0-84ECB520D688}.rpt: The request could not be submitted for background processing.
I'm using the Report Application Server XI Release 2 .NET SDK. This is the code that produces the exception (The export type is pdf):
ByteArray ba = this.reportClientDocument.PrintOutputController.Export(ConvertExportReportTypeToCrystalReportExportType(),0);
The error is also logged by Business Objects in the crystalras log file:
ErrorLog 2007 12 3 12:24:56.531 6624 4872 (\servers\ras\dtsagent\reporthandler.cpp:11592): CReportHandler::buildReportViewerError: CSResultException thrown. ErrorSrc:"CRPE" FileName:"\servers\ras\dtsagent\reporthandler.cpp" LineNum:11588 ErrorCode:685 ErrorMsg:" Error in File C:\WINDOWS\TEMP\{F6D30537-956A-458C-96D0-84ECB520D688}.rpt:
The request could not be submitted for background processing." DetailedErrorMsg:""
This has been happening regularly about once a week, at which point the RAS fails and no more reports can be run until the CMS and RAS servers have been restarted.
Has anyone else had this problem, or have any ideas?
Thanks

It was not a bug (not in all cases anyhow), but it is one of those error message that might as well say; something went wrong. I wrote an article on the most likely cases for the error and the article can be downloaded from here;
https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/50a6f5e8-8164-2b10-7ca4-b5089df76b33
See if the above article will help you out. Please note that having the latest SP / FP is step one. The downloads page is here;
http://service.sap.com/sap/bc/bsp/spn/bobj_download/main.htm
Ludek
Follow us on Twitter http://twitter.com/SAPCRNetSup

Making a REST webservice call. Error code: 401 Access to the requested resource is not allowed

Hi All,
I’m having a hard time figuring out how to make Rest WebService calls.
I tried executing this directly through browser and I get an error.
http:localhost:8080/rest/bean/atg/userprofiling/ProfileServices/loginUser?arg1=[email protected]&arg2=Password
13:18:20,613 ERROR [RestSecurityServlet] Error code: 401
Access to the requested resource is not allowed: /atg/userprofiling/ProfileServices
atg.rest.RestException: Access to the requested resource is not allowed: /atg/userprofiling/ProfileServices
at atg.rest.processor.RestSecurityProcessor.checkAccess(RestSecurityProcessor.java:546)
at atg.rest.processor.RestSecurityProcessor.handleGetRequest(RestSecurityProcessor.java:313)
at atg.rest.processor.RestSecurityProcessor.doRESTGet(RestSecurityProcessor.java:199)
at atg.rest.servlet.RestPipelineServlet.serviceRESTRequest(RestPipelineServlet.java:417)
at atg.rest.servlet.RestPipelineServlet.service(RestPipelineServlet.java:260)
at atg.servlet.pipeline.PipelineableServletImpl.passRequest(PipelineableServletImpl.java:157)
at atg.servlet.pipeline.PipelineableServletImpl.service(PipelineableServletImpl.java:320)
at atg.rest.servlet.RestPipelineServlet.service(RestPipelineServlet.java:264)
at atg.rest.servlet.HeadRestServlet.service(HeadRestServlet.java:130)
at atg.servlet.pipeline.PipelineableServletImpl.service(PipelineableServletImpl.java:267)
From the documentation I understand that I need to create a session, is the session only necessary to access secured components since this
particular method “ProfileServices.loginUser “ has been declared as not secure in restSecurityConfiguration.xml
Also, are there two different ways in which I can log in
1. Using RestSession.createSession providing the username and password.
2. Or using ProfileServices.loginUser or ProfileFormHandler
Can someone please clarify

If you are invoking the REST web-service from a Java client then you can create a RestSession object using the createSession method. But in your case you seem to be invoking it with a HTTP request which by default would be treated as a GET request by ATG's REST implementation. Therefore being a GET, it would try to fetch a property "loginUser" from /atg/userprofiling/ProfileServices component (based on your URL) which would always fail.
To invoke loginUser() method of ProfileServices with your passed argument you need to tell ATG's REST system to treat your incoming request not as GET but as a POST request which you can do using atg-rest-http-method control parameter in your request like this
http:localhost:8080/rest/bean/atg/userprofiling/ProfileServices/loginUser?arg1=[email protected]&arg2=Password&atg-rest-http-method=POST
It should work this way provided your restSecurityConfiguration.xml is proper.

Transport release error

Hi,
When i am trying to release a transport, I am getting the following error. I tried the first solution, but it is doing nothing. I don't understand the second solution. Could anyone help me on this as I am doing first time in my life transport management? ( i am really tired of learning sap skills, but on the other side it is really hard to get new jobs) Thanks,
Only edit objects from package Z_RFC in local requests
Message no. TK332
Diagnosis
Objects in package Z_RFC cannot be edited in transportable Workbench requests in the current system BAM. The transport routes are configured such that objects from package Z_RFC can only be edited in local Workbench requests.
System Response
The function terminates
Procedure
You have the following options:
If you want to transport objects in package Z_RFC into the target TE2 once only, without changing the configuration of the transport routes, then create a transport of copies in the extended view of the Transport Organizer (Transaction SE01). Go to the request overview and choose Request/task -> Object list -> Include objects to include your objects in this transport of copies.
If you would like objects in package Z_RFC to be transported generally into the target system TE2, contact your transport administrator. In this case, the configuration of the transport routes must be corrected in the Transport Management System (TMS). For details, see the documentation on the Transport Management System

Go to SE80
Select Package
Type Z_RFC
AND CHANGE THE TRANSPORT LAYER TO CORRECT SYSTEM
Rgds
PR

Transportation lane KEY not getting generated in the table

Transportation lane KEY not getting generated in the table
Hi folks,
The issue is like this :
We have a weekly workorders upload program from legacy systems to SAP-APO. The legacy planners send a .CSV file containing material-wise workroders. A customised zee program picks these quantities & writes them in Prod.planned keyfigures in SNP planning book. This process is done for the manufacturing locations only.
Lately workorders for two particular material M1 & M2 had failed to get upload. It gives the error 'NO VALID SOURCE OF SUPPLY COULD BE FOUND' in its Job log. We did some debugging & found that for successful materials the TRPID is getting generated in the table /SAPAPO/V_TRPROD whereas this TRPID is missing for M1 & M2. Why this is happening is our main concern. We tried deleting the PPM & creating this again, assuming that the PPMID is the precursor for generating this TRPID, but this yielded no results.
____ for successful upload______________
se16 --> /SAPAPO/V_TRPROD
Version = 000
LOCTO = LOCID KEY for manufacturing location
MATID = MATID KEY of successfully loaded workorder
Enter
This gives the following results
TRPID = TRPID KEY
LOCFR = LOCID KEY for manufacturing location
LOCTO = LOCID KEY for manufacturing location
MATID = MATID KEY for successfully loaded workorder
( This seems a self-lane, i.e both TO & FROM location are same)
____ for unsuccessful upload________
se16 --> /SAPAPO/V_TRPROD
Version = 000
LOCTO = LOCID KEY for manufacturing location
MATID = MATID KEY for unsuccessfully loaded workorder
Enter
This gives the following results
Error = No Table entries found for specified KEYS
We are perplexed why this TRPID is not getting generated for these two particular material M1 & M2?
We have deleted their PPM & re-created them to cross-check if the PPMID KEY is the trigger for generating the TRPID key. This didn't work!
Please let us know in case someone faced a similar issue.
Many Thanks.
Kumar
Edited by: Blue Lotus on Jun 9, 2011 2:44 PM

Yes Anand.
We deleted the PPM & created it again, which didn't work.
Later on we deleted the product itself from APO & re-CIFed it from R3 & then re-created the PPM.
The PPMID which was missing earlier is now getting created! However no luck with the TRPID.
Why this TRPID is not getting generated in our only concern
Regards
Kumar

Undable to drop tablespace ORA-01561: failed to remove all objects in the

hi,
i am unable to drop table tablespace how can i do that??
please advise
DROP TABLESPACE tbs_tp2 INCLUDING CONTENTS AND datafiles
ERROR at line 1:
ORA-01561: failed to remove all objects in the tablespace specified
Thanks in advance
siva
chennai

Have you tried dropping the objects individually? You can see which objects still belong to this tablespace by using the DBA_SEGMENTS view as shown below:
SELECT OWNER, SEGMENT_NAME, SEGMENT_TYPE, TABLESPACE_NAME
FROM DBA_SEGMENTS
WHERE TABLESPACE_NAME=tbs_tp2;HTH!

Could not save preferences because the file could not be found (Windows) then Error 1 on PS,AE,PR,ID

I was trying out Photoshop, everything was running fine then one day when I close it I get an error:
"Could not save preferences because the file could not be found..."
Now when I boot it I get the Configuration Error 1.
After Effects still boots, but it reset all my preferences there. For example the workplace layout was reset, all my saved Output presets were removed and my memory-cache and performance settings were reset again.
Premiere and InDesign get the error too and won't boot.
This is the second time it has happened, I'll try wiping every Adobe program and reinstalling all over again, but it had run fine before for a while and it randomly happened.
Any idea how to fix this?

Nope I havent touched the Documents folder.
Forgot to mention that I'm on Windows 7

Restlet Error "The server has not found anything matching the request URI"

I want to serve some static html pages along with my restlet services from the same app ( running in Tomcat )
Here is my web.xml
<?xml version="1.0" encoding="UTF-8"?>
<web-app id="WebApp_ID" version="2.4"
            xmlns="http://java.sun.com/xml/ns/j2ee"
            xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
            xsi:schemaLocation="http://java.sun.com/xml/ns/j2ee
                 http://java.sun.com/xml/ns/j2ee/web-app_2_4.xsd">
   <display-name>first steps servlet</display-name>
   
   <context-param>
      <param-name>org.restlet.application</param-name>
      <param-value>
         firstSteps.FirstStepsApplication
      </param-value>
   </context-param>
   
   <servlet>
      <servlet-name>RestletServlet</servlet-name>
      <servlet-class>
         org.restlet.ext.servlet.ServerServlet
      </servlet-class>
   </servlet>
   
   <servlet-mapping>
      <servlet-name>RestletServlet</servlet-name>
      <url-pattern>/*</url-pattern>
   </servlet-mapping>
</web-app>
Here is my Application router class
public class FirstStepsApplication extends Application
     @Override
     public synchronized Restlet createInboundRoot()
          Router router = new Router(getContext());
          // Defines only one route
          router.attach("/hello", HelloWorldResource.class);
          router.attach("/login", LoginResource.class);
          router.attach("/", BasicResource.class);
          return router;
}I've gone back to the basic first steps example.
It works fine if the url pattern is <url-pattern>/*</url-pattern>
localhost/rest/login returns a string from my LoginResource, same too for /hello
However a static html page I have /Mypage.html does not get returned when I enter the URL /MyPage.html
However, if I then modify the url pattern to be
<url-pattern>/login</url-pattern>
and then enter the url /MyPage.html I will get the html page.
But ...... I get the error "The server has not found anything matching the request URI" when I enter the url /login which worked ok the first case.
What must I do in order for both Restlet & Static HTML resources to work together?
Thanks ... J

yes, basicResource is my own class. It's a catch all for restlet requests that don't match any of the other ones. It just returns String = "My catch all resource"
Because you highlighted it I decided to try and remove it from my Restlet Router. Presto, it now works, the login & hello requests are serviced by my Restlet resources and the MyPage.html requests are served the mypage.html file. This now brings another question. If from my servlet mapping in web.xml all urls are to be handled by restlet "/*", how then does a mypage.html request not get serviced by my restlet? Seems to be just passed through the restlet framework when there is no router to match it? what do you think?

Error - The request could not be performed due to an error from the I/O device

Hello,
I have a Hyper-V server with a few virtual machines.
The host runs Windows Server 2012 R2 with Hyper-V.
VMs are Windows Server 2012R2 Generation 2 and Windows Server 2003 Generation 1.
All VMs running on VHDX on local host disks, no raid, no storage. Most VMs run on dedicated disks.
I am having the following error when I demand large amount of I/O on VMs:. "The request could not be performed due to an error from the I/O device"
This error happens when I run robocopy which requires large amount of writing, or on a SQL 2014 VM which also requires many reads and writes.
Whenever this error occurs, the replicas of the VMs require resynchronization and the MSSQL service stops.
Analyzing the events of the Host, I find the following warning multiple times: "The IO operation at logical block address 0x31fd01 for Disc 4 (PDO name: \ Device \ 0000005d) was retried." Disc 4 is where SQL runs.
Is there any special configuration that must be done to avoid these errors?
Thank you!
Rafael

Hi Eng.Rafael Grecco,
>>Analyzing the events of the Host, I find the following warning multiple times: "The IO operation at logical block address 0x31fd01 for Disc 4 (PDO name: \ Device \ 0000005d) was retried." Disc 4 is where SQL runs.
>>Chkdsk /r didn't return any error.
It seems that it is not a hyper-v issue .
I would suggest you to keep the driver up-to-date for your hyper-v host .
In addition , here is a similar thread :
http://answers.microsoft.com/en-us/windows/forum/windows_8-hardware/the-io-operation-at-logical-block-address-for-disk/23c32152-c2a6-4c6d-b229-95dc1470231a
Best Regards
Elton Ji
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Targeting all objects down the group structure

Hi all.
I have a tree of groups of several levels, like here
http://i43.tinypic.com/29ok7sm.jpg
Each group has some 5-10 objects, and I need to target each of them for some appearance change (the way it worked in Illustrator 9), without selecting each of them individually -- in total I have thousands of them. Clicking on "Contents" all the way down doesn't work because not all objects are on the same levels.
Basically, I want object-level targeting only, and I want to disable "smart targeting".
How do I do that?

This is a case-in-point illustration of my complaint that Illustrator doesn't know the difference between something being selected as an object and merely having all its subparts selected.
Despite Illustrator's insistence upon two selection pointers, the so-called Direct Selection tool (which I think should be renamed something sensible, like Subselect tool) doesn't always subselect. That is, as soon as you have all of the points of a path selected, the rest of the program acts as if the selection's parent (the path) is selected. So, for example, you then can't perform alignments on the supposedly direct-selected points.
That problem cascades to the rest of the selection interface; supposedly "direct select" all of the objects in a Group, and other features in the program act like you have selected the Group.
Even in math classes that involve set theory, it is stressed that a set is not the same thing as all of its members.
Nor is Illustrator consistent even in this. Select a Group, apply a fill, and the fill is applied to each of the individual members. But apply an effect, like opacity, and the effect is applied at the Group level. This is by design. That doesn't make it intuitive.
JET

LS Getting the error "The data could not be saved because the server could not be contacted" when deploying on my local desktop

Hi:
I have a very simple test LS App:
1 Table "Person" with 1 property "Name"
One totally standard Editable Grid
So no complicated calculations that could timed out...
When I hit F5 the screen launches and shows the data, but when I try to create a new Person it waits for about 2 minutes and then the following error appears:
The data could not be saved because the server could not be contacted. Please check your network connection and try saving again. The Operation timed out.
Despite the error the data gets persisted on the database.
I am on VS 2013 Pro Update 4 and SQL Server LocalDB 2012 (v11.0).

If you decide to try again I would:
1) Uninstall Visual Studio
2) Uninstall SQL Server (all versions)
3) Re-install SQL Server
4) Re-Install Visual Studio
Unleash the Power - Get the LightSwitch 2013 HTML Client / SharePoint 2013 book
http://LightSwitchHelpWebsite.com

I am trying to copy a document and I keep getting the error "Can't paste the objects. The requested transformation would make some objects fall completely off the drawing area."

I am trying to make duplicate documents with minor adjustments to each and when I try to copy the artwork from one document and paste it into the new document I keep getting the error "Can't paste the objects. The requested transformation would make some objects fall completely off the drawing area." Both documents are exactly the same size, res, color format etc. I even tried to drag and drop and get the same error message. Anyone know what I can do to resolve this issue?

Try scaling the view size down to 6% or so and then do a Select All. See if there are objects off the artboard which may be causing this error. Most often you will see this if there were guides dragged from a ruler which were selected by dragging the white arrow and then deleted. This leaves the anchor points at the edge of the work area.

Error "Not all data could be changed in LC" when running DP macro

We are getting the error, "Not all data could be changed in LC" when running DP macros and we are not sure why. It seems to only happen when we are executing it via a Process Chain but not using the DP background processing scheduling. Does anyone know why this is happening?

Hi Stacy,
I hope you are seeing this in message spool. This message comes up for various reasons. We used to see a message saying "No data saved".
Some of the reasons could be " the new value (lets say 3 ) after the macro execution is same as after execution (3)".
See if some of the values are fixed and could not be changed.
I would take a selection id with just few values and execute the job for that selection id and compare the pre and after results. That should answer all your questions.

Transport Release Error: Not all objects in the request could be locked.

Similar Messages

Maybe you are looking for