Disable Logging of Failed Tests by Individual Step
Hello All,
I have an experimental version of a test sequence that will loop through and attempt several different sets of input parameters until it obtains the desired outcome. When it does obtain the desired outcome, I then log/report the set of input parameters that were used, and disregard all others. The issue I am having is that I do not know how to disable logging of the step iterations that failed (the ones I want to disregard). I can disable reporting of failed tests for the entire sequence, but I do not know how to do limit it so specific tests/steps. I've tried a few ideas related to deleting the current element from the report, but that doesn't seem to work correctly for my application. Please advise.
Thanks in advance,
GSinMN
There is sure another way to solve it. How about looking into the "Step Execution" topic in the TestStand help?
You can see that as "Action Number" 18 (21/24 when looping) is evaluation of the Status. In Action Number 29, the Post Action is performed.
You can call a Sequence when the step result is passed or failed (independently).
The idea is to call a subsequence passing the Step reference and enter the results into the ResultList in there. The calling step(s) would not record their results.
Norbert
CEO: What exactly is stopping us from doing this?
Expert: Geometry
Marketing Manager: Just ignore it.
Similar Messages
-
Disable logging to database for a single step
I need to record a step to report but that particular step should not be recorded to database. Any suggestions on how to achieve this?
A part of the database schema I have is:
The schema handles results as follows:
- Logs UUT Results to the UUT_RESULT table.
- Logs Step Results to STEP_RESULT table.
- Logs sequence call step details to STEP_SEQCALL table.
Currently all the steps are getting recorder under STEP_RESULT table.
Also is there a way to make it generic so that when this particular step type is used it never gets logged to database but does show on the report?
Thanks.
CLD,CTD
Attachments:
DatabaseOptions.JPG 51 KBlvrat -
I believe you have two options to ignore a specific step type:
1) You can set the Precondition setting for the STEP_RESULT statement to something like:
Logging.StepResult.TS.StepType != "MyStepTypeNameToIgnore"
2) You can set the Result Filtering Expression setting for the Database Options tab to
Logging.StepResult.TS.StepType != "MyStepTypeNameToIgnore"
If there was a unique property for these steps, you could use the existence of that property.
- Scott
Scott Richardson
National Instruments -
[svn:osmf:] 12689: Disable failing test.
Revision: 12689
Revision: 12689
Author: [email protected]
Date: 2009-12-08 23:18:46 -0800 (Tue, 08 Dec 2009)
Log Message:
Disable failing test.
Modified Paths:
osmf/trunk/framework/MediaFrameworkFlexTest/org/osmf/MediaFrameworkTests.as -
Report results of test in different step
Hello All,
I have a section of a test sequence that loops through several iterations while looking for an acceptable result. The only result I am interested in is the passing result (or the last iteration if a passing result is not found). I've tried a few different things like removing the result of the failed step from the result list, but this doesn't work if on-the-fly reporting is enabled.
I have read a few different articles and posts that sound like they may have a better solution. If I disable result recoding on the individual step inside the loop, then use a seperate step, after the loop to only record the result of the last iteration, the failed steps will never get into the report, even if on the fly reporting is enabled (presumably).
My question is this: It is unclear to me how to set up that extra step outside the loop to copy the result from a previous step. Please advise.
Thanks in advance,
GSinMNGive this one a try. I think it is what you are looking for. If you set up the looping on the step correctly it will only display the last result. I have to stop looping if the step is pass.
Let me know if you have questions or concerns.
Regards,
jigg
CTA, CLA
teststandhelp.com
~Will work for kudos and/or BBQ~
Attachments:
DiscardFails.seq 6 KB -
The report server has encountered a configuration error. Logon failed for the unattended execution account. (rsServerConfigurationError)
Log on failed. Ensure the user name and password are correct. (rsLogonFailed)
Logon failure: unknown user name or bad password
am using Windows integrated security,version of my sql server 2008R2
I have go throgh the different articuls, they have given different answers,
So any one give me the exact soluction for this problem,
Using service account then i will get the soluction or what?
pls help me out it is urgent based.
Regards
Thanks!Hi Ychinnari,
I have tested on my local environment and can reproduce the issue, as
Vaishu00547 mentioned that the issue can be caused by the Execution Account you have configured in the Reporting Services Configuration Manager is not correct, Please update the Username and Password and restart the reporting services.
Please also find more details information about when to use the execution account, if possible,please also not specify this account:
This account is used under special circumstances when other sources of credentials are not available:
When the report server connects to a data source that does not require credentials. Examples of data sources that might not require credentials include XML documents and some client-side database applications.
When the report server connects to another server to retrieve external image files or other resources that are referenced in a report.
Execution Account (SSRS Native Mode)
If you still have any problem, please feel free to ask.
Regards
Vicky Liu
Vicky Liu
TechNet Community Support -
Proxy Log On failed(Error Code 12154)
Hello There!
Can someone P'se help on this
Installation
WIN2K-Pro
Oracle8iEE-1.7..
Oracle9iAS
Two different Oracle homes
Problem
I am trying to test for the first time my portal but i am receiving the following error messages
1)when I type in <http://mysever/pls/dad> this is the result:
Proxy log On failed.
Please verify that you have specified correct connectivity information i.e.username, password & connect-string in the Database Access Descriptor
Error-Code:12640
Error TimeStamp:Mon, 06 Aug 2001 04:25:15 GMT
Database Log In Failed
TNS is unable to connect to destination. Invalid TNS address supplied or destination is not listening. This error can also occur because of underlying network transport problems.
Verify that the TNS name in the connectstring entry of the DAD for this URL is valid and the database listener is running.
2)Also when I try this <http://myserver/pls/admin/gateway.htm>the result is as follows:
Mon, 06 Aug 2001 20:01:28 GMT
No DAD configuration Found
DAD name:
PROCEDURE : gateway.htm
URL : http://nt2kserver.learning.local:80/pls/admin/gateway.htm
PARAMETERS :
===========
ENVIRONMENT:
============
PLSQL_GATEWAY=WebDb
GATEWAY_IVERSION=2
SERVER_SOFTWARE=Oracle HTTP Server Powered by Apache/1.3.12 (Win32) ApacheJServ/1.1 mod_ssl/2.6.4 OpenSSL/0.9.5a mod_perl/1.24
GATEWAY_INTERFACE=CGI/1.1
SERVER_PORT=80
SERVER_NAME=nt2kserver.learning.local
REQUEST_METHOD=GET
QUERY_STRING=
PATH_INFO=/admin/gateway.htm
SCRIPT_NAME=/pls
REMOTE_HOST=
REMOTE_ADDR=127.0.0.1
SERVER_PROTOCOL=HTTP/1.1
REQUEST_PROTOCOL=HTTP
REMOTE_USER=
HTTP_CONTENT_LENGTH=
HTTP_CONTENT_TYPE=
HTTP_USER_AGENT=Mozilla/4.0 (compatible; MSIE 5.01; Windows NT 5.0)
HTTP_HOST=nt2kserver.learning.local
HTTP_ACCEPT=*/*
HTTP_ACCEPT_ENCODING=gzip, deflate
HTTP_ACCEPT_LANGUAGE=en-us
HTTP_ACCEPT_CHARSET=
HTTP_COOKIE=
Authorization=
HTTP_IF_MODIFIED_SINCE=
HTTP_REFERER=Hello Teijo
sorry about this, but I have checked on both of my two standalone servers(Running similar softwares and settings(host name...etc) independently) I can't see any service registerd by APACHE LISTENER.The only listener service available is for ORACLE8i under the oracle8iHome.
The only running service under the 9iASHome is HTTPServer.During both installations I didn't encounter any problems,everything ended succefully.Can you p'se let me know if this sounds Ok to you?
Hashim
<BLOCKQUOTE><font size="1" face="Verdana, Arial">quote:</font><HR>Originally posted by Teijo Lallukka ([email protected]):
This looks like a tnsnames.ora issue. I copied a reply from a similar post:
Since you have multiple Oracle homes, you are probably looking at the wrong tnsnames.ora. The reason why SQL*Plus is working is because it is being picked up from an Oracle Home where the correct tnsnames.ora resides. Here is a quick way to confirm this
- Stop the Apache Listener service
- Open a "Console prompt window"
- Go to $IAS_HOME/Apache/Apache
- Set TNS_ADMIN=Directory_with_correct_tnsnames.ora
- Issue "tnsping your_dbalias_name" to verify that you can ping the database. If this does not work, then your tnsnames.ora is incorrect
- If it works, startup Apache by issuing "start Apache -k start"
- Try connecting to Portal thru your browser
- This should work.
- Post a reply if this does not work<HR></BLOCKQUOTE>
null -
For PostUUT in the NI teststand II courese example 4-1 Modifying callback.seq, there are two steps, one is Test Passed,
the other is Test Failed, both set each preconditions, for example, Parameters.Result.Status == "Failed" in the test failed step, if the step failed in the main sequence,the string "failed " is filled into Parameters.Result.Status
but I can't find where the string "failed" is created in steps in the main sequence.
Because I can't find any expression in any steps to fill into Parameters.Result of the test failed step in the PostUUT.
In fact, when running if step fails, the string "failed " is filled into Parameters.Result.Status
Would you please explain for it ?
thanks,Hi,
Look at the Sequential Model Sequence File, and either the sequence SinglePass of Test UUTs for the step that invokes the step Post UUT.
Then look at the Parameter List for the SequenceCall for that step. you will find your answer.
Regards
Ray Farmer -
Hi All,
I have the environment like DC1- 2k3 Service Pack 2 which is holding FSMO roles and now I build a new ADC DC2 – 2k8 R2 OS on different location (Subnet) . After completing ADC I run the DCDAIG on DC2 where I am getting below error
Not: I tried the configuration D4 and D2 for Burflag but no luck
Note: DC1 and DC2 both are on different location with different subnet.
Any suggestion or solution please
Doing primary tests
Testing server: indai\DC2
Starting test: Advertising
Warning: DsGetDcName returned information for
\\DC1.test.com, when we were trying to reach
DC2.
SERVER IS NOT RESPONDING or IS NOT CONSIDERED SUITABLE.
......................... DC2 failed test Advertising
Starting test: FrsEvent
There are warning or error events within the last 24 hours after the
SYSVOL has been shared.
Failing SYSVOL replication problems may cause
Group Policy problems.
Starting test: NCSecDesc
Error NT AUTHORITY\ENTERPRISE DOMAIN CONTROLLERS doesn't have
Replicating Directory Changes In Filtered Set
access rights for the naming context:
DC=DomainDnsZones,DC=mh-man,DC=biz
Error NT AUTHORITY\ENTERPRISE DOMAIN CONTROLLERS doesn't have
Replicating Directory Changes In Filtered Set
access rights for the naming context:
DC=ForestDnsZones,DC=mh-man,DC=biz
......................... DC2 failed test NCSecDesc
Starting test: NetLogons
Unable to connect to the NETLOGON share! (\\DC2\netlogon)
[DC2] An net use or LsaPolicy operation failed with error
67, The network name cannot be found..
......................... DC2 failed test NetLogons
Starting test: SystemLog
A warning event occurred. EventID: 0x0000008E
Time Generated: 09/17/2014 16:40:54
Event String:
The time service has stopped advertising as a time source because the local clock is not synchronized.
A warning event occurred. EventID: 0x00000032
Time Generated: 09/17/2014 16:40:54
Event String:
The time service detected a time difference of greater than 5000 milliseconds for 900 seconds. The time difference might be caused by synchronization with low-accuracy time sources or by suboptimal
network conditions. The time service is no longer synchronized and cannot provide the time to other clients or update the system clock. When a valid time stamp is received from a time service provider, the time service will correct itself.
A warning event occurred. EventID: 0x0000008E
Time Generated: 09/17/2014 16:41:53
Event String:
The time service has stopped advertising as a time source because the local clock is not synchronized.
A warning event occurred. EventID: 0x0000008E
Time Generated: 09/17/2014 16:43:06
Event String:
The time service has stopped advertising as a time source because the local clock is not synchronized.
A warning event occurred. EventID: 0x0000008E
Time Generated: 09/17/2014 16:45:15
Event String:
The time service has stopped advertising as a time source because the local clock is not synchronized.
A warning event occurred. EventID: 0x0000008E
Time Generated: 09/17/2014 16:47:14
Event String:
The time service has stopped advertising as a time source because the local clock is not synchronized.
A warning event occurred. EventID: 0x0000008E
Time Generated: 09/17/2014 16:48:22
Event String:
The time service has stopped advertising as a time source because the local clock is not synchronized.
A warning event occurred. EventID: 0x0000008E
Time Generated: 09/17/2014 16:49:34
Event String:
The time service has stopped advertising as a time source because the local clock is not synchronized.
A warning event occurred. EventID: 0x0000008E
Time Generated: 09/17/2014 16:50:45
Event String:
The time service has stopped advertising as a time source because the local clock is not synchronized.
A warning event occurred. EventID: 0x0000008E
Time Generated: 09/17/2014 16:52:55
Event String:
The time service has stopped advertising as a time source because the local clock is not synchronized.
An error event occurred. EventID: 0x00000406
Time Generated: 09/17/2014 16:52:59
Event String:
The processing of Group Policy failed. Windows attempted to retrieve new Group Policy settings for this user or computer. Look in the details tab for error code and description. Windows will
automatically retry this operation at the next refresh cycle. Computers joined to the domain must have proper name resolution and network connectivity to a domain controller for discovery of new Group Policy objects and settings. An event will be logged when
Group Policy is successful.
A warning event occurred. EventID: 0x0000008E
Time Generated: 09/17/2014 16:54:21
Event String:
The time service has stopped advertising as a time source because the local clock is not synchronized.
A warning event occurred. EventID: 0x0000008E
Time Generated: 09/17/2014 16:58:35
Event String:
The time service has stopped advertising as a time source because the local clock is not synchronized.
A warning event occurred. EventID: 0x0000008E
Time Generated: 09/17/2014 16:59:48
Event String:
The time service has stopped advertising as a time source because the local clock is not synchronized.
A warning event occurred. EventID: 0x0000008E
Time Generated: 09/17/2014 17:00:59
Event String:
The time service has stopped advertising as a time source because the local clock is not synchronized.
A warning event occurred. EventID: 0x0000008E
Time Generated: 09/17/2014 17:02:11
Event String:
The time service has stopped advertising as a time source because the local clock is not synchronized.
A warning event occurred. EventID: 0x0000008E
Time Generated: 09/17/2014 17:03:24
Event String:
The time service has stopped advertising as a time source because the local clock is not synchronized.
A warning event occurred. EventID: 0x0000008E
Time Generated: 09/17/2014 17:05:39
Event String:
The time service has stopped advertising as a time source because the local clock is not synchronized.
A warning event occurred. EventID: 0x0000008E
Time Generated: 09/17/2014 17:06:47
Event String:
The time service has stopped advertising as a time source because the local clock is not synchronized.
A warning event occurred. EventID: 0x00000018
Time Generated: 09/17/2014 17:11:36
Event String:
Time Provider NtpClient: No valid response has been received from domain controller DC1.test.com after 8 attempts to contact it. This domain controller will be discarded as a time source and
NtpClient will attempt to discover a new domain controller from which to synchronize. The error was: The peer is unreachable.
......................... DC2 failed test SystemLog
Pradip SisodiyaHello,
please upload the following files so we could understand your setup:
ipconfig /all >c:\ipconfig.log [from each DC/DNS Server]
dcdiag /v /c /d /e /s:dcname >c:\dcdiag.log
repadmin /showrepl dc* /verbose /all /intersite >c:\repl.log ["dc* is a place holder for the starting name of the DCs if they all begin the same (if more then one DC exists)]
dnslint /ad /s "DCipaddress" (http://support.microsoft.com/kb/321045)
ADREPLSTATUS
http://www.microsoft.com/en-us/download/details.aspx?id=30005 can also be exported to file.
As the output will become large, DON'T post them into the thread, please use Windows OneDrive (https://onedrive.live.com) [with open access!]
and add the link from it here. Also the /e in dcdiag scans the complete forest, so better run it on COB.
Best regards
Meinolf Weber
MVP, MCP, MCTS
Microsoft MVP - Directory Services
My Blog: http://blogs.msmvps.com/MWeber
Disclaimer: This posting is provided AS IS with no warranties or guarantees and confers no rights.
Twitter: -
I am able to run the report fine in BIDS in the preview window, and it deployes fine. When it goes to view the report in the browser, I get the following error. There is no domain, I am using a standalone computer with SQL Server and SSRS on
this one machine.
Can anyone point to where I might configure the permission it is looking for? thanks! Steven
The report server has encountered a configuration error. Logon failed for the unattended execution account. (rsServerConfigurationError)
Log on failed. Ensure the user name and password are correct. (rsLogonFailed)
The user name or password is incorrect
Steven DeSalvoHi StevenDE2012,
Based on the error message "The report server has encountered a configuration error. Logon failed for the unattended execution account. (rsServerConfigurationError)", it seems that the Unattended Execution Account settings in Reporting Services
Configuration is not correct.
Reporting Services provides a special account that is used for unattended report processing and for sending connection requests across the network. Unattended report processing refers to any report execution process that is triggered by an event rather than
a user request. The report server uses the unattended report processing account to log on to the computer that hosts the external data source. This account is necessary because the credentials of the Report Server service account are never used to connect
to other computers. To configure the account, please refer to the following steps:
Start the Reporting Services Configuration tool and connect to the report server instance you want to configure.
On the Execution Account page, select Specify an execution account.
Type the account and password, retype the password, and then click Apply.
In addition, please verify you have access to the Report Server database by following steps:
Go to SQL Server Reporting Services Configuration Manager, make sure the configuration is correct.
Go to Database, Verify that you can connect to the database.
Make sure you are granted public and RSExecRole roles.
Reference:
Configure the Unattended Execution Account
Configure a Report Server Database Connection
If the problem is unresolved, i would appreciate it if you could give us detailed error log, it will help us move more quickly toward a solution.
Thanks,
Wendy Fu -
How can assign a PASS/FAIL test to each element of a cluster?
I would like to pass a cluster from Labview 8.6 to TestStand 4.1.1 and apply a pass/fail test to each boolean element of the cluster. For elements of the cluster that are string values, I would like to apply a string value test. For elements of the cluster that are numeric values, I would like to apply numeric value or limit tests. How can I do this?
Hi epsilon-delta,
The best way to do this would be to create a custom data type from that cluster and store the output of your vi to a local variable. You can then add Pass/Fail Test, Numeric Limit Test and String Value Test steps (using the None adapter) after the Action step to test each element of the cluster.
Eric B.
National Instruments -
Hi,
My redo log backup failed and I've no clue on the errors. Below is the job log. Please advise. TIA !
Job started
Step 001 started (program RSDBAJOB, variant &0000000000064, user ID BACKUP_USER)
No application server found on database host - rsh/gateway will be used
Execute logical command BRARCHIVE On host bering
Parameters:-u / -jid LOG__20090313130000 -c force -p initprd.sap -cds
SXPG_COMMAND_EXECUTE(LONG)
COMMANDNAME = BRARCHIVE
OPERATINGSYSTEM = ANYOS
TARGETSYSTEM = bering
DESTINATION = SAPXPG_DBDEST_BERING
BR0002I BRARCHIVE 7.00 (32)
BR0181E Option '-cds' not supported for 'disk'
BR0007I End of offline redo log processing: aeactnyg.log 2009-03-13 13.00.19
BR0280I BRARCHIVE time stamp: 2009-03-13 13.00.21
BR0005I BRARCHIVE terminated with errors
External program terminated with exit code 3
BRARCHIVE returned error status E
Job finished
DLHi,
You tried to backup redo log on disk.
Option -cds (create second copy, delete and the first copy serial) is not supported when you do a redolog backup using disk as backup device type.
Try to change the option to -sd (save first copy and delete)
rgds,
fendhy. -
Log On Failed. COMException (0x80000000): No Error.
Version of Crystal Reports Designer: 12.0.0683
Visual Studio 2005
OS Vista Ultimate
I have designed a report that uses an XML file as a data source. In the deigner, the connection I am using is XML and Web Serivces. I specify the XML and the schema file.
I have a Windows application that creates a dataset from an XML file and sets it as the report's data source.
After I run VerifyDatabase I get the following error:
Log on failed., System.Runtime.InteropServices.COMException (0x80000000):
No error.
at CrystalDecisions.ReportAppServer.ClientDoc.ReportClientDocumentClass.VerifyDatabase()
at CrystalDecisions.ReportAppServer.ReportClientDocumentWrapper.VerifyDatabase()
at CrystalDecisions.CrystalReports.Engine.ReportDocument.VerifyDatabase()
Here is my code:
Try
Dim PathToDB As String = mReportLog
Me.crPrinterUse = New AXIARReports
Dim ds As Data.DataSet = clsDataSet.ReportDataSet(PathToDB)
Me.crPrinterUse.SetDataSource(ds)
Me.crPrinterUse.Database.Tables(0).SetDataSource(ds.Tables(0))
Dim SubReport As CrystalDecisions.CrystalReports.Engine.ReportDocument
For i As Integer = 0 To Me.crPrinterUse.Subreports.Count - 1
SubReport = Me.crPrinterUse.Subreports(i)
SubReport.SetDataSource(ds)
SubReport.Database.Tables(0).SetDataSource(ds.Tables(0))
Next
Me.crPrinterUse.VerifyDatabase()
Me.crv.ReportSource = Me.crPrinterUse
Catch ex As Exception
MessageBox.Show("Error setting report data: " & ex.Message & vbLf & "Check the log file for more details.", _
"Report Data Error", MessageBoxButtons.OK, MessageBoxIcon.Error)
cGlobal.Log("Error setting report data: " & ex.Message & ", " & ex.InnerException.ToString)
Throw New Exception(ex.Message)
End Try
I ran the modules appliacation and noticed that the development machine version is slightly different from the deployed machine.
Version of file on the deployed machine: 12.0.0.840
Could this be causing my porblem? If so, how do I solve this?
I also have VS 2008 installed on my machine.
Thanks,
KarenThanks for your reply Ludek.
I performed the steps in your blog. Using the XML file that the data set creates with the embeded schema gives me no mapping errors.
I simplifiied my report to the simplest form, just a few fields in the details. I simplified the XML source file to just two records and found that the report is loading the data file in the connection used at design time. I have checked off Save Data with Report. So there must be some step that I am missing so that the report at runtime accepts the data set as the new data an not attempt to connect.
I will review my code again and see if there is something essential that I missed. I will report back.
Karen -
Multiple Numeric Limit Test - Accessing only the failed tests
I would to access only the failed tests in a multiple numeric limit test. The specific information I want to access is the measurement value, low limit, high limit, and comparator type. I need to access these pieces of information during runtime from a Message Popup, therefore i have to use the Message Expression field in the "Text and Buttons" tab of the Message Popup step to access this information.
[DL]Hi,
PostStepFailureCallback is the one you want to start with. The only difference is where you get the data from the Step.Results.
For the Limits etc you will need to look in the Measurement property. Also, beware that you are dealing with an array of data.
Regards
Ray Farmer -
Hi,
I want to log the failed logins.
I did :
touch /var/adm/loginlog
chmod 600 /var/adm/loginlog
chgrp sys /var/adm/loginlog
in /etc/default/login : retries=5 is uncommented ans syslog=yes and syslog_failed_logins=5
svcadm refresh system/system-log
vi /etc/security/policy.conf-----lock_after_retries=yes
Still when I login with the wrong password 5 times by root or ordinary user then check the /var/adm/loginlog file
It is empty
It is not showing any logs
Please help.
Thanks
Neha
[email protected]What command are you using to attempt the (failed) logins?
I was able to get this to work by using these 3 steps:
# touch /var/adm/loginlog
# chmod 600 /var/adm/loginlog
# chgrp sys /var/adm/loginlog
Then, I attempted 5 login attempts into this system with rlogin.
The newly created log looks like this:
# more /var/adm/loginlog
cindys:/dev/pts/1:Thu Mar 22 15:59:07 2012
cindys:/dev/pts/1:Thu Mar 22 15:59:20 2012
cindys:/dev/pts/1:Thu Mar 22 15:59:29 2012
cindys:/dev/pts/1:Thu Mar 22 15:59:42 2012
cindys:/dev/pts/1:Thu Mar 22 15:59:51 2012 -
Trouble with the pass/fail test
I started having this trouble just recently and I can't figure out the problem. Just all of a sudden (without me changing anything anywhere apparently), whenever I call a pass/fail test and if the test fails, the sequence execution immediately goes to the <End Group> step. I want the execution to proceed with the next step regardless of a pass or a fail. I have rechecked the run options repeatedly and there's nothing in there that might be causing this. Also, if a pass/fail step fails and I am running on single pass, even the report does not get generated.
I know it can be really hard for someone out there to tell me what the problem is. I am posting this message here just to see if people have any general comments/suggestions on what might be going on (perhaps this is a common problem which someone has run into before). The comments/suggestions might help me debug the problem.
Thanks
AnujHi Anuj,
Do you have other step type in the same sequence or just Pass/Fail type?
What adapter type are you using, LabVIEW, CVI, etc...
Does it happen in the just one sequence or any sequence?
What versions are you using?
Posting an example would help.
Regard
Ray Farmer
Regards
Ray Farmer
Maybe you are looking for
-
Ipod Nano not showing in Itunes or Windows
hi, when i connect my ipod to my computer it charges but does not show under itunes or in windows. i've tried all the Rs except one...restore. and the only reason i haven't tried restore is because i can't access my ipod under itunes to run the resto
-
MacBook can no longer see internal hard drive or replacement
This morning, when forcing a restart of a MacBook (It was non responsive in sleep) it restarted with 2 or 3 of those ominous tones and then the standard Mac startup sound. I then got the blinking folder indicating there was no system disk available.
-
Windows Server 2012 R2 - ALL HF's Failing to install as "Does Not Apply to this computer"
Hi, A general question about hot fix installs. I have multiple servers that are all Windows 2012 R2. They do not have internet connections, so I have to install the Hotfixes manually. I download the HF's from the ISO download page (https://support.mi
-
HT201210 i am trying to restore an iphone 3g but it keeps failing
can anyone help with this ?
-
Setting System DSN for MS Access Database using Java Code
How to set the system DSN for Access database using Java Code at runtime....??? Replies are deeply appreciated...