Disabling service auto-discovery
a client has a 10.5.x server that was "converted" to an advanced config from standard.
it seems whatever determines service auto-discovery for clients is still active, and i need to disable this feature. so, for instance, when a user logs into client machine, ichat, ical, and mail automatically configure themselves with accounts, even though the details may not be correct.
how do i disable this?
thanks for any help.
replying to myself…
i think this might be it, but can anyone confirm?
in wgm, there's a ServiceConfiguration record. the relevant bit looks like this:
<dict>
<key>IsStandardConfig</key>
<true/>
i'm guessing changing that key to false will prevent clients from automatically discovering and configuring services, correct?
Similar Messages
-
I have installed CUOM 2.2 and am trying to monitor a Call manager 4.2 cluster. I have configured all Call Manager servers with the SNMP string and host in windows services.
When I run an Auto Discovery in CUOM with the Publisher as the Seed Device I expected all CCMs, VGs and Phones to be discovered however CUOM discovered the Publisher only.
Can anyone advise what I have missed?
Many Thanks
PeteI think it seems like SNMP string issues. Please check at both CUOM and Device side for SNMP.
check
1. Network connectivity between CUOM and device
2. Check SNMP are working fine at device side.
3. Check SNMP configuration at CUOM
If there is problem and is fixed, please rediscover the device in CUOM. -
2012 R2 DirectAccess multi domain forest: Is it possible Limit Auto-discovery of domain controllers?
I've just successfully implemented Multisite server 2012 R2 DirectAccess in a child domain of a global company with numerous sub domains. I'd like to limit the scope of the auto discovery of management servers in 2012 R2 DA is anyone aware of
any way of doing this?
During the default initial configuration of DirectAccess Auto-discovery of domain controllers is performed for all domains in the same forest as the DirectAccess server and client computers.
In my scenario the number of sub domains and multinational nature of the company means that the DA servers cannot contact all DCs for every child domain in the forest.
This means the Operations Status page in the Remote Access Management console always shows the status of the Domain Controller check as "critical" leaving a red X amongst my nice green ticks. It's untidy and at first glance it looks like there
are major problems with the service.
The DA servers, Client machines and users are in a single sub domain so we have no need to contact the other child domain DCs.
I looked into using the Remove-DAMgmtServer PowerShell cmdlet however this is not applicable since it cannot be used to remove automatically configured management servers such as DCs.
Also the child domain DCs don't actually appear in the management servers list.Hi, a colleague of mine had the same problem in a DirectAccess deployment in a large organization tat have a multi-domain forest. He had no choice to open network flow to have at least one domain controller per domain in the forest.
BenoitS - Simple by Design http://danstoncloud.com/blogs/simplebydesign/default.aspx -
Hi,
I have EMC12 installed on WinServer2008 R2 SP1. Cygwin ssh deamon started and configured. Agent is running on local account (LA) with administrative privileges and additional setting configured according to docs. OMS is running on local system account.
When I start target auto discovery I get following error:
Status Failed
Exit Code 4
Step ID 1022
Started 01-Jun-2012 11:06:54 GMT+02:00
Ended 01-Jun-2012 11:06:54 GMT+02:00
Step Elapsed Time 0 seconds
Management Service OracleEM.Myhost:4889_Management_Service
Output Log
Host discovery job failed. Exception: Unable to create directory:discoveryunder:C:/MiddlewareHome/agent/agent_inst
Even I had created such directory manually it stills shows the same error. I have also verified that LA account has full control to C:/MiddlewareHome/agent/agent_inst directory.
Cygwin doesnt have sudo option installed (not needed according to docs on Windows, although job credentials require sudo delegation - what for?).
Any ideas?
Thanks,
JPLogs show following:
[2012-06-04T15:40:46.267+02:00] [EMGC_OMS1] [WARNING] [] [oracle.sysman.Util.class] [tid: [ACTIVE].ExecuteThread: '11' for queue: 'weblogic.kernel.Default (self-tuning)'] [userId: SYSMAN] [ecid: d70f67283c055146:772f8397:137b7b1143f:-8000-0000000000000252,0] [APP: emgc] oracle.sysman.core.discovery.uimodel: MissingResourceException: nlsid=OSB_DISCOVERY_TEXT, rb=oracle.sysman.db.rsc.ob
[2012-06-04T15:41:27.281+02:00] [EMGC_OMS1] [WARNING] [] [oracle.sysman.emdrep.disc.nmap.jobs.RunNMapCommand] [tid: RemoteJobWorker 1931] [userId: SYSMAN] [ecid: 0000JUrgIZnFKA05zzK6yW1FnBYO000001,1:26629:3] [APP: emgc] Exception occurred while creating discovery directory under:C:/MiddlewareHome/agent/agent_inst:java.security.PrivilegedActionException: oracle.sysman.emSDK.agent.client.exception.PerformOperationException: Failed to launch process: Cannot run program "mkdir": CreateProcess error=2, The system cannot find the file specified
[2012-06-04T15:41:27.281+02:00] [EMGC_OMS1] [WARNING] [] [oracle.sysman.emdrep.disc.nmap.jobs.RunNMapCommand] [tid: RemoteJobWorker 1931] [userId: SYSMAN] [ecid: 0000JUrgIZnFKA05zzK6yW1FnBYO000001,1:26629:3] [APP: emgc] Unable to create discovery directory:discoveryunder:C:/MiddlewareHome/agent/agent_inst
[2012-06-04T15:41:27.312+02:00] [EMGC_OMS1] [WARNING] [] [oracle.sysman.emdrep.disc.nmap.jobs.RunNMapCommand] [tid: RemoteJobWorker 1931] [userId: SYSMAN] [ecid: 0000JUrgIZnFKA05zzK6yW1FnBYO000001,1:26629:3] [APP: emgc] executeNMapCommand: Exception: Unable to create directory:discoveryunder:C:/MiddlewareHome/agent/agent_inst[[
java.lang.Exception: Unable to create directory:discoveryunder:C:/MiddlewareHome/agent/agent_inst
at oracle.sysman.emdrep.disc.nmap.jobs.RunNMapCommand.executeNMapCommand(RunNMapCommand.java:633)
at oracle.sysman.emdrep.disc.nmap.jobs.RunNMapCommand.executeCommand(RunNMapCommand.java:337)
at oracle.sysman.emdrep.jobs.CommandStepExecutor.execute(CommandStepExecutor.java:153)
at oracle.sysman.emWebservices.inbound.jobs.worker.ConsoleJobStepExecutor.execute(ConsoleJobStepExecutor.java:316)
at oracle.sysman.emWebservices.inbound.jobs.worker.ConsoleJobStepExecutor.executeStep(ConsoleJobStepExecutor.java:182)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
at oracle.j2ee.ws.server.jaxws.ServiceEndpointRuntime.processMessage(ServiceEndpointRuntime.java:369)
at oracle.j2ee.ws.server.jaxws.ServiceEndpointRuntime.processMessage(ServiceEndpointRuntime.java:201)
at oracle.j2ee.ws.server.jaxws.JAXWSRuntimeDelegate.processMessage(JAXWSRuntimeDelegate.java:479)
at oracle.j2ee.ws.server.provider.ProviderProcessor.doEndpointProcessing(ProviderProcessor.java:1187)
at oracle.j2ee.ws.server.WebServiceProcessor$1.run(WebServiceProcessor.java:1089)
at java.security.AccessController.doPrivileged(Native Method)
at javax.security.auth.Subject.doAsPrivileged(Subject.java:517)
at oracle.security.jps.internal.jaas.AccActionExecutor.execute(AccActionExecutor.java:47)
at oracle.security.jps.internal.jaas.CascadeActionExecutor$SubjectPrivilegedExceptionAction.run(CascadeActionExecutor.java:79)
at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:363)
at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:146)
at weblogic.security.Security.runAs(Security.java:61)
at oracle.security.jps.wls.jaas.WlsActionExecutor.execute(WlsActionExecutor.java:48)
at oracle.security.jps.internal.jaas.CascadeActionExecutor.execute(CascadeActionExecutor.java:52)
at oracle.security.jps.internal.jaas.AbstractSubjectSecurity.executeAs(AbstractSubjectSecurity.java:138)
at oracle.j2ee.ws.server.provider.GenericProviderPlatform.runAs(GenericProviderPlatform.java:304)
at oracle.j2ee.ws.server.WebServiceProcessor.invokeEndpointImplementation(WebServiceProcessor.java:1096)
at oracle.j2ee.ws.server.provider.ProviderProcessor.doRequestProcessing(ProviderProcessor.java:581)
at oracle.j2ee.ws.server.WebServiceProcessor.processRequest(WebServiceProcessor.java:232)
at oracle.j2ee.ws.server.WebServiceProcessor.doService(WebServiceProcessor.java:192)
at oracle.j2ee.ws.server.WebServiceServlet.doPost(WebServiceServlet.java:484)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:727)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:820)
at weblogic.servlet.internal.StubSecurityHelper$ServletServiceAction.run(StubSecurityHelper.java:227)
at weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelper.java:125)
at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:300)
at weblogic.servlet.internal.TailFilter.doFilter(TailFilter.java:26)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
at oracle.sysman.eml.app.EMRepLoginFilter.doFilter(EMRepLoginFilter.java:315)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
at oracle.sysman.emas.fwk.MASConnectionFilter.doFilter(MASConnectionFilter.java:41)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
at oracle.adf.library.webapp.LibraryFilter.doFilter(LibraryFilter.java:175)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
at oracle.sysman.eml.app.ContextInitFilter.doFilter(ContextInitFilter.java:555)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
at oracle.adfinternal.view.faces.caching.filter.AdfFacesCachingFilter.doFilter(AdfFacesCachingFilter.java:129)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
at oracle.security.jps.ee.http.JpsAbsFilter$1.run(JpsAbsFilter.java:111)
at java.security.AccessController.doPrivileged(Native Method)
at oracle.security.jps.util.JpsSubject.doAsPrivileged(JpsSubject.java:313)
at oracle.security.jps.ee.util.JpsPlatformUtil.runJaasMode(JpsPlatformUtil.java:413)
at oracle.security.jps.ee.http.JpsAbsFilter.runJaasMode(JpsAbsFilter.java:94)
at oracle.security.jps.ee.http.JpsAbsFilter.doFilter(JpsAbsFilter.java:161)
at oracle.security.jps.ee.http.JpsFilter.doFilter(JpsFilter.java:71)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
at oracle.dms.servlet.DMSServletFilter.doFilter(DMSServletFilter.java:136)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
at weblogic.servlet.internal.RequestEventsFilter.doFilter(RequestEventsFilter.java:27)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.wrapRun(WebAppServletContext.java:3715)
at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(WebAppServletContext.java:3681)
at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:120)
at weblogic.servlet.internal.WebAppServletContext.securedExecute(WebAppServletContext.java:2277)
at weblogic.servlet.internal.WebAppServletContext.execute(WebAppServletContext.java:2183)
at weblogic.servlet.internal.ServletRequestImpl.run(ServletRequestImpl.java:1454)
at weblogic.work.ExecuteThread.execute(ExecuteThread.java:209)
at weblogic.work.ExecuteThread.run(ExecuteThread.java:178)
That seems strange as mkdir is WinSrvr system command.
JP -
Windows Tablet workplace turn on device management failed on auto-discovery without any error
Hi
I am using windows surface pro 3 to test windows mdm function. I set up a CNAME for my test domain and pointed it to my develop desktop. My discovery service uses a publicly signed cert from VeriSign. If I turn off the auto detect server address switch and
input the discovery server manually, everything works well. But if I using the auto-discovery, the enrollment stopped before sending the discovery SOAP request.
Below is the network traffic between my tablet and my server:
step1: https to enterpriseenrollment.mydomain.com and failed for SSL certificate mismatch
step2: http to enterpriseenrollment.mydomain.com and get 302 redirect(my discovery service)
step3: https get to my discovery server and get HTTP 200.
Then the tablet does not send any request any more, it should send a HTTP get again with Content-Type: soap+xml and then a POST with soap but it not.
These work flow is as same as the Windows Intune and Intune works! I don't know why.
Thanks for any help!Yes, because if you are using the actual hostname in the manual address, something like
https://yourServer/..., and if the SSL Certificate is issued to "yourServer" (CN=yourServer), then there is no certificate name mismatch or SSL errors during certificate validation.
However, when the automatic enrollment happens and the HTTPS request is sent to
https://enterpriseenrollment.yourServer.com/..., then even though the underlying connection is made to yourServer IP Address, the certificate that the server presents is for yourServer, not enterpriseenrollment.yourServer.com.
So there will be a certificate name mismatch and the secure channel establishment will fail.
For this automatic scenario to work properly, the server certificate must be issued to the correct domain - such as a wildcard certificate (*.yourServer.com). That should ensure that there are no secure channel errors and then the enrollment process can
continue further.
You can use the manual address for development/testing purposes, but once you decide to release the solution, you may want to use the automatic discovery for easier end user interaction and use the right SSL certificates - issued to the right CN.
Windows Store Developer Solutions, follow us on Twitter:
@WSDevSol|| Want more solutions? See our blog -
Dear Team,
In my Network we have 192.168.3.x series and 192.168.5.x series IP range. When we check in network it is visible only my series(192.168.3.x or 192.168.5.x) of computers, it will not show other series connected computes.
Could you please advise on this issue.
Thanks in Advance.
Regards,
Lavakumar Reddy MHi Lavakumar Reddy M ,
Here is a blog about how to disable the network discovery network.
http://blogs.technet.com/b/networking/archive/2010/12/06/disabling-network-discovery-network-resources.aspx
Here is a list of the services involved:
•Computer Browser
•SSDP Discovery
•UPnP Device Host
•Registry
•Function Discovery Resource Publication
•Function Discovery Provider host
•Link-Layer Topology Mapper
There are predefined rules for Network Discovery
•TCP 2869 - UPNP
•TCP 5357 - WSDAPIEvents
•TCP 5358 - WSDEvents Secure
•UDP 5355 - LLMNR
•UPD 3702 - WSD publishing
•UDP 1900 - SSDP
Here is the ruls for NetBIOS
•UDP 138 - NetBIOS Datagram
•UDP 137 - NetBIOS Name
We need to confirm these service is open and these port are not denied by the firewalls.
Best regards,
Fangzhou CHEN
Fangzhou CHEN
TechNet Community Support -
How to disable yum auto-update in OL6
Hello,
What is the correct procedure to disable yum auto-updates?
The "yum-updatesd" daemon that existed in OL 5 does no longer exist in OL 6.
I found out that the "PackageKit Update Applet" seems to be responsible for running the auto-update. It can be enabled or disabled in the new Preferences/Startup Applications control panel. There is also the "gpk-prefs" control panel to set the update interval to "never". However, both control panels work on a per-user/login basis and cannot be used to disable yum auto-update system-wide.
Finally I found /etc/PackageKit/PackageKit.conf, which has a DefaultBackend parameter, but I don't know what I should put there.
Is there here a way, to disable the yum auto-update system-wide without uninstalling PackageKit?
I already checked the documentation at http://docs.redhat.com/docs/en-US/Red_Hat_Enterprise_Linux/6/html/Deployment_Guide/ch-PackageKit.html but it was not helpful.
Thanks!The actuall problem I'm trying to fix is the following error:
<pre>
Another app is currently holding the yum lock; waiting for it to exit...
The other application is: PackageKit
Memory : 45 M RSS (357 MB VSZ)
Started: Tue Jul 10 09:27:04 2012 - 04:09 ago
State : Sleeping, pid: 2317
</pre>
The above error can happen if you have an active Gnome session and e.g. connect as root using ssh session and try to use yum.
I may have found a way now to disable the automatic system updates, however, I don't know if this is the proper solution since I cannot find any information about it.
I modified */etc/PackageKit/PackageKit.conf* and changed:
<pre>
DefaultBackend=yum -> DefaultBackend=nobackend
</pre>
It requires a re-login of your Gnome X session to take affect.
Then Administration/Software update does no longer scan for updates, and apparently no longer lock yum at the system level. At least the problem seems to be fixed globally that way.
I will mark this question as answered, but any ideas are still welcome.
Thanks!
Btw, here is a link to previous older thread to disable it on a per-user basis:
Disable PackageKit Update Applet -
A lot of sites have video ads that load and start playing while safari is loading the entire page - slows everythiing down. Also a couple news sites I go to have autoload/play content. Is there a way to disable these auto loads?
Install the ClickToFlash or ClickToPlugin Safari extension.
-
I want to change my region and everytime it says my itunes match subscription is active. I disabled the auto renewal without any success!! I even called apple support that promised me to call within 2 hours, that was 10 days ago!! Any help??
Hi Roger
Thank you for your reply.
My original feed is: http://casa-egypt.com/feed/
However, because I modified the feed http://feeds.feedburner.com/imananddinasbroadcast and nothing changed, I redirected it to another feed and then I deleted this feed.
Is there any way to change the feed in itunes? The only feed I have now is http://feeds.feedburner.com/CasaEgyptStation
I tried to restore the feed http://feeds.feedburner.com/imananddinasbroadcast but feedburner refused.
I know that I missed things up but I still have hope in working things out.
Thanks is advance.
Dina
Message was edited by: dinadik -
Disable JRE Auto update in Vista for all users?
I feel like a complete idiot that I can't figure this out, but it's either so obvious I'm overlooking it, or I just plain can't figure it out, so I'm hoping someone here can help.
We have not yet been able to figure out how to simply disabled the Auto Update option when installing JRE under Vista, so it will never check for updates, no matter what user is logged into a pc. I've just installed the newest version 1.6.0_05-b13, but get the same results.
Basically, we are creating a "base clone image" of a Vista workstation and we need the auto update feature of the JRE to be disabled so it doesn't check for updates. When a new user logs into the pc, we want them to 'inherit' this setting from the default user profile, or we simply want a 'global' setting on the pc that stops all JAVA update checks from occuring. But even though there are multiple registry keys that 'look' like they control the auto update function, no matter how we set them the update option still shows it is enabled when you open the JAVA control panel.
We have 2 basic problems:
- When a standard user runs the JAVA Control Panel applet and they select the 'Update' tab, the option to "uncheck" autoupdates is "grayed out". If we make the user a local administrator, then it is not grayed out anymore and they can set the option. Problem is, we have thousands of users and none of them are local administrators, hence the problem of getting it to already be defaulted to not check for updates. How do we get the update checkbox to NOT be grayed out for a NON-administrator?
- How do we set the 'global' (or default) option to disable the auto update checkbox for ALL users? No matter what we try, when a new user logs in, the auto update feature is still enabled after their initial profile is generated from the first time login.
I was able to figure out if I change the "EnableJavaUpdate" value in the below registry key, it will "remove" the Update tab from the JAVA Control Panel. But does the simply remove the tab? Or does it remove the tab AND disable auto updates for ALL users on the computer?
HKEY_LOCAL_MACHINE\SOFTWARE\JavaSoft\Java Update\Policy
I've sent multiple emails to Sun asking for help on what should be a simple thing to do, but have never received a reply from them.
Keith HemmelmanThank you for the reply. I apologize for not getting back here sooner.
We actually already use a deployment.properties file located under the Default User profile on our Vista setup. It's located under the "C:\Users\Default\AppData\LocalLow\Sun\Java\Deployment" folder. This file does get copied over to a new user profile when a new person logs in. This is what we want since we have set things like the maximum cache size and temporary file location.
The problem though is there is no setting that disables the automatic update check within this file. The best I can figure out is that for some reason under the Vista environment, the auto update setting is controlled in the registry at: HKEY_CURRENT_USER\Software\JavaSoft\Java Update\Policy
There is a REG_BINARY key there that appears to control this option. It is named "EnableAutoUpdateCheck". The problem is that the value of this key is "several" characters long and it is "different" from one user to the next. I tried disabling auto update under the Java Control Panel and then copied the value of this key into the same aread of the Default User hive but when a new user logs in, it ignores that setting and auto update is still enabled. I also tried using a simple "0" to disable the autoupdate or a "1" to enable it for this key, but it doesn't work either. (This is very frustrating why there isn't a simple 1 or 0 setting to turn the auto update setting on/off.)
We had no problem getting this to work under XP. Basically we didn't have to do anything special in XP. We simply created a temporary user account and made all the settings we wanted and then copied that profile over to our Default User profile and the Java autoupdate setting under the Java Control Panel was disabled for all new users. We did the same thing under Vista, but the auto update setting was ignored and re-enabled for all new users.
I read through the settings for the deployment.properties file located at the below link, but there is nothing there to control the auto update setting.
http://java.sun.com/j2se/1.5.0/docs/guide/deployment/deployment-guide/properties.html
Thus, we can't get the auto update setting to be disabled in the default user profile so it will in turn be disabled for all new users that log into the computer. This is extremely frustrating.
The other equally frustrating problem we have run into under the Vista environment is that when you run the Java Control Panel, the option to disable the auto update check is "grayed out" and the user can't uncheck this option to disable auto update. We have found you must be an administrator before this option is no longer grayed out. Since none of our thousands of users are admins, this is also a problem for us. (This option works fine for a standard user if you are on a XP machine though. It's just Vista where things have changed.)
I've sent repeated emails to Sun in the past asking for help, but they never replied.
Keith -
How can I disable the auto resizing in NetBeans?
Hello,
how can I disable the auto resizing in NetBeans?
I cannot resize nor displace components due to this automation.first what do u mean by auto resizing ? if u mean the layout that automatically aligns itself then ..... if that's yr question then u need to set the layout to null
if using netbeans then right click on the the mainPanel and setlayout to null if eclipse the frame.getContent.setlayout(null);
NetBean doesn't have a forum it has mailing list u can subscribe there
http://www.netbeans.org/servlets/TLogin
Edited by: raven_roy on Mar 12, 2008 2:58 AM -
HI
in sharepoint 2013 WFE servers event viewer i receive following error many times
Log Name: Application
Source: Microsoft-Windows-IIS-W3SVC-WP
Date: 4/14/2015 2:23:56 PM
Event ID: 2303
Task Category: None
Level: Warning
Keywords: Classic
User: N/A
Computer: TSharepint2013.test.com
Description:
There was an error during processing of the managed application service auto-start for application pool: 'SecurityTokenServiceApplicationPool'. Some application services may not have been processed correctly. Please check the configuration for application
service auto-start for the application(s) assigned to this application pool. The data field contains the error code.
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider Name="Microsoft-Windows-IIS-W3SVC-WP" Guid="{670080D9-742A-4187-8D16-41143D1290BD}" EventSourceName="W3SVC-WP" />
<EventID Qualifiers="32768">2303</EventID>
<Version>0</Version>
<Level>3</Level>
<Task>0</Task>
<Opcode>0</Opcode>
<Keywords>0x80000000000000</Keywords>
<TimeCreated SystemTime="2015-04-14T11:23:56.000000000Z" />
<EventRecordID>183840</EventRecordID>
<Correlation />
<Execution ProcessID="0" ThreadID="0" />
<Channel>Application</Channel>
<Computer>TSharepint2013.test.com</Computer>
<Security />
</System>
<EventData>
<Data Name="ApplicationPool">SecurityTokenServiceApplicationPool</Data>
<Binary>02000780</Binary>
</EventData>
</Event>
adilHI
in sharepoint 2013 WFE servers event viewer i receive following error many times
Log Name: Application
Source: Microsoft-Windows-IIS-W3SVC-WP
Date: 4/14/2015 2:23:56 PM
Event ID: 2303
Task Category: None
Level: Warning
Keywords: Classic
User: N/A
Computer: TSharepint2013.test.com
Description:
There was an error during processing of the managed application service auto-start for application pool: 'SecurityTokenServiceApplicationPool'. Some application services may not have been processed correctly. Please check the configuration for application
service auto-start for the application(s) assigned to this application pool. The data field contains the error code.
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider Name="Microsoft-Windows-IIS-W3SVC-WP" Guid="{670080D9-742A-4187-8D16-41143D1290BD}" EventSourceName="W3SVC-WP" />
<EventID Qualifiers="32768">2303</EventID>
<Version>0</Version>
<Level>3</Level>
<Task>0</Task>
<Opcode>0</Opcode>
<Keywords>0x80000000000000</Keywords>
<TimeCreated SystemTime="2015-04-14T11:23:56.000000000Z" />
<EventRecordID>183840</EventRecordID>
<Correlation />
<Execution ProcessID="0" ThreadID="0" />
<Channel>Application</Channel>
<Computer>TSharepint2013.test.com</Computer>
<Security />
</System>
<EventData>
<Data Name="ApplicationPool">SecurityTokenServiceApplicationPool</Data>
<Binary>02000780</Binary>
</EventData>
</Event>
adil -
In Weblogic we need to define the managed server in the administration server first for it to be a part of the cluster. Which means that if the administration server is not available for any reason the configuration of the cluster cannot be altered.
Is there a concept of Auto-Discovery available in weblogic (similar to JBoss) where-in the cluster nodes are automatically converged into a cluster if the partion-name and the multicast IP address and port are the same within the same subnet.A server can join a cluster if the admin server is not up, but all servers must be configured and the admin server is required for that.
The usual deployment strategy would be to pre-configure all the servers you may want to run but only boot an initial set. Then there is no requirement for the admin server to be up.
I'd have some concerns about the auto-discovery approach. We tend to be relatively conservative for production environments and wanting it to be extremely deterministic for admins.
-- Rob
WLS Blog http://dev2dev.bea.com/blog/rwoollen/ -
Disable iPhoto auto launch w/ plist?
I know you can disable iPhoto auto launch from the Image Capture app, but I would like to know where Image Capture saves its preferences so I can disable it by editing or replacing a plist.
I need to change preferences on a whole lab of Macs, and I would prefer to do it remotely on all of them at once if possible.
I looked but I can't seem to find where the preferences are saved. If anyone knows or knows of an easy way to do it let me know. Thanks.
Power Mac G4 Mac OS X (10.4.7)It seems to be this file:
"/Users/yourname/Library/Preferences/ByHost/com.apple.ImageCapture2.00039343a1a8 .plist"
At any rate, that is the file that contains this entry, as the sole thing in the file:
HotPlugActionPath String /Applications/Image Capture.app
So you can try adding/deleting this file and see if that will do what you want.
Francine
Francine
Schwieder -
Auto-Discovery BlackList Alert
Hi Everyone,
Is any way to configure the WAAS CM to send a SNMP Trap or Syslog Message when an IP Address start to appears in the
Auto-Discovery BlackList Server Table..
I wanna to alert the NOC when the traffic to a specific server be not optimized cause the BlackList Reason
Thanks in Advanced
Andre LomonacoDo i need to package my tag handler in a jar file?no.
If
i put the full qualified uri in the jsp file like
this
<jsp:root xmlns:jsp="http://java.sun.com/JSP/Page"
xmlns:bmw="urn:jsptld:/WEB-INF/bmw-taglib.tld"
version="1.2">
it works perfectly, but i don't want to hard-code my
tld path in the jsp files or in the web.xml.you have two options:
1. you do not put anything about the taglib into web.xml. then you must use the path to the tld as URI. the path is relative to the root of the application. i think in your case you would have to use "/WEB-INF/bmw-taglib.tld" as URI and not "/test-taglib".
2. you introduce the taglib in the web.xml and then you are free what URI you use.
The specification in section JSP7.4.3 ("Implict Map
Entries from TLDs") sais, that an <uri> tag in the tld
is sufficient and a corresponding entry in the web.xml
is generated automatically.yes, option 1.
robert
Maybe you are looking for
-
How to install adobe in mac book pro
i need help installing adobe on mac book pro
-
How can l block users from backing dating transactions
1. How can l block users from back dating transactions in SAP B1. It was discovered that, in production dept there is this allowance given to them to keep producing for the previous month in the new month; this according to line staff is to enable th
-
Any one tell me the standard Return Delivery form name( smart forms or sap script ) anything? thanks in advance JK
-
Dropdownlist values problem urgent
Hi all, I developed a page in jdev 9.0.3. And I deployed to R11 application. Page needs user id to generate data for the dropdownlist in view objects where clause like user_id = fnd_profile('USER_ID'). When I open the page after restarting apache the
-
Dear all, I have a valid backup of 10.2.0.4.0 database taken using RMAN (veritas netbackup )..I tried restoring this version database in 10.2.0.3.0 database.. it failed with the error version incompatible.. anyway can I restore 10.2.0.4. databsae in