Disabling the IRda controller

Hi All,
I am not sure if this is the right forum to post in.. but..
I need some help with writing and applescript/bash script that will disable the IRda controller (and stop the remotes working)
Preferably something i can automate (I have over 700 computers to do this on), unfortunately using the server to do this is not an option, all the computers a re bound to a windows AD network, no OD controller.
any help would be greatly appreciated.
Thanks
Matt

Easier to build an automator app and push it out via casper to the startup items folder when i have 700 systems to do it on.

Similar Messages

P45NE02 managing the jmicron controller & ICH10R controller in BIOS

Can anyone shed light on how to manage these controllers in the BIOS? Under integrated peripherals, there are selections for:
Extra RAID/IDE Controller
This item allows you to enable/disable the onboard RAID/IDE controller.
RAID Mode
This item is used to select RAID mode for the JMicron RAID controller. There are three
options: IDE, RAID and AHCI.
And then clicking on intergrated peripherals we see:
On-Chip SATA Controller
These items allow users to enable or disable the SATA controller.
RAID Mode
This item is used to enable/disable the RAID function for SATA devices.
Which entries control which controller?
Thanks!

Extra RAID/IDE Controller = JMicron Controller
On-Chip SATA Controller = ICH10R integrated controller (primary controller, not "extra" = Secondary Controller
Which RAID Mode setting is relevant for which of is the controller is pretty obvious as the relation is indicated by the contiguity of the options.

Where the interrupt routine vectors stored in if I disable the AXI interrupt controller fast interrupt option?

In an IPI system, I have several IPs connected their interrupt output with AXI interrupt controller. In the software part, I can create several interrupt callback functions for different interrupts. I wonder Where the interrupt routine vectors stored in if I disable the AXI interrupt controller fast interrupt option? Are they stored inside the specific IP?
E.g.: if I have an VDMA and setup its callback function for general and error, then the callback function starting addresses are stored inside VDMA registers?
Thank you.

>> The address of the ISR is stored in this table", so is the table stored inside the interrupt controller on inside ARM cpu? But when I used microblaze, it seems there is no interrupt controller inside the microblaze
No, that table is in a memory which implements the processor's address space. If you use MB, you can add an interrupt controller to it but that's not relevant. Interrupt controllers cause processors to jump to a fixed location in their address space. At this point in time there are two main options: either some program has registered to respond to this interrupt or not. In the latter case, the OS, bare-metal app etc takes a decision on what to do: ignore the interrupt, crash, just turn off that interrupt and return etc. If an interrupt has been registered to respond to that interrupt, the address of the interrupt service routine is in table belonging to the OS, bare-metal app etc so the code at the fixed offset jumps to the address inside that table ie it jumps to the ISR.

JRE 1.7 / Java Plug-in - Long delay in retrieving the applet File(JAR) due to a request to the Domain Controller(on port 53)

Description:
A specific group of users/customers (using Windows7 OS with IE and FireFox web browsers) are facing problems with retrieving the applet File, after they upgraded the JRE on the system(PC) to JRE 1.7.0_25-b17 from JRE version 1.6.0_29-b11.
With JRE 1.7.0_25-b17 it is noticed that when the Java plugin requests for the applet File; it sends a request to the Domain Controller of the user, which causes a delay of 2 to 5 minutes and sometimes hangs. The problem occurs consistently.
The current temporary workaround for this group of users is to use JRE version 1.6.0_29-b11.
Problem analysis:
To investigate the problem the below steps were executed:
1) Collected the Java console outputbelow details from the user's system. (The complete output is not posted due to lengthy content, though can be added further to this post if required.)
(a) Works fine with JRE version 1.6.0_29-b11. Kindly refer to Java console output in the code ‘section A’ towards the end of this post.
(b) The problem occurs with problem with JRE version 1.7.0_25-b17. Kindly refer to Java console output in the code ‘section B’ towards the end of this post. The step where the problem is observed, is indicated as(##<comment>##).
2) The network settings in the user's browser was checked. Internet Options > Connections > LAN setting
The configured option is 'Use automatic configuration script' and the value is http://www.userAppX.com/proxy.pac
This configuration remains the same irrespective of the JRE version in use.
3) The network settings in the Java Control Panel was checked.
The used/selected option is "Use browser settings", although values for 'Use proxy server' and 'use automatic proxy configuration script' are filled-in as 'user-proxy.com' and 'http://www.userAppX.com/proxy.pac' respectively.
This configuration remains the same irrespective of the JRE version in use.
4) The proxy PAC file was checked and debugging was done for the request 'https://myAppletHost.com/download/...'. The FindProxyForUrl function (including the conditions defined in it, for the hostname and domain checks) returns PROXY user-proxy.com:80
5) The user also tried the below
a. Changed the option in the network settings in the browser to 'Proxy server' with Address 'user-proxy.com' and Port '80'
b. Restarted the browser.
c. Tried with Java Plug-in 1.6.0_29, JRE version 1.6.0_29-b11. There was no problem and no request to the Domain Controller of the user.
d. Tried with Java Plug-in 10.40.2.43, JRE version 1.7.0_40-b43. The problem occurs with the delay and a request to the Domain Controller of the user is observed.
Kindly refer to Java console output in the code ‘section C’ towards the end of this post.
6) The user also tried setting the below property in the Java Control panel; restarted the browser, and try with JRE 1.7.0_40-b43. The problem stil persists.
-Djava.net.preferIPv4Stack=true
7) The Global Policy Management of the Domain Controller was verified by the user. It has GPO for proxy setting but nothing related to Java security.
Questions:
The problem seems be specific to a particular (user) environment setup, and the user faces the problem when using JRE 1.7.
We would like to know if the issue is in the (user) environment setup or in JRE 1.7.
Could you please help with information/ideas/suggestions to identify the root cause and solution for this problem?
Section A:
Java Plug-in 1.6.0_29
Using JRE version 1.6.0_29-b11 Java HotSpot(TM) Client VM
User home directory = C:\Users\userA
basic: Plugin2ClassLoader.addURL parent called for https://myAppletHost.com/download/myApplet.jar
network: Connecting https://myAppletHost.com/download/myApplet.jar with proxy=HTTP @ user-proxy.com/194.xxx.xx.xx:80
network: Server https://myAppletHost.com/download/myApplet.jar requesting to set-cookie with "BCSI-CS-b1bb5056c5b0e83f=2; Path=/"
network: Server https://myAppletHost.com/download/myApplet.jar requesting to set-cookie with "BCSI-CS-b1bb5056c5b0e83f=2; Path=/"
security: Loading Root CA certificates from C:\Program Files (x86)\Java\jre6\lib\security\cacerts
security: Loaded Root CA certificates from C:\Program Files (x86)\Java\jre6\lib\security\cacerts
security: Loading SSL Root CA certificates from C:\Program Files (x86)\Java\jre6\lib\security\cacerts
security: Loaded SSL Root CA certificates from C:\Program Files (x86)\Java\jre6\lib\security\cacerts
security: Loading certificates from Deployment session certificate store
security: Loaded certificates from Deployment session certificate store
security: Loading certificates from Internet Explorer ROOT certificate store
security: Loaded certificates from Internet Explorer ROOT certificate store
security: Checking if certificate is in Deployment denied certificate store
network: Connecting https://myAppletHost.com/download/myApplet.jar with cookie "JSESSIONID=0000IK4bEMoqXH10zsl88rwvoRI:175oe9tjd; BCSI-CS-b1bb5056c5b0e83f=2"
network: Downloading resource: https://myAppletHost.com/download/myApplet.jar
                Content-Length: 403.293
                Content-Encoding: null
Dump system properties ...
https.protocols = TLSv1,SSLv3
java.vm.info = mixed mode, sharing
java.vm.name = Java HotSpot(TM) Client VM
java.vm.specification.name = Java Virtual Machine Specification
java.vm.specification.vendor = Sun Microsystems Inc.
java.vm.specification.version = 1.0
java.vm.vendor = Sun Microsystems Inc.
java.vm.version = 20.4-b02
javaplugin.nodotversion = 160_29
javaplugin.version = 1.6.0_29
javaplugin.vm.options =
os.arch = x86
os.name = Windows 7
os.version = 6.1
trustProxy = true
deployment.proxy.auto.config.url = http://www.userAppX.com/proxy.pac
deployment.proxy.bypass.local = false
deployment.proxy.http.host = user-proxy.com
deployment.proxy.http.port = 80
deployment.proxy.override.hosts =
deployment.proxy.same = false
deployment.proxy.type = 3
deployment.security.SSLv2Hello = false
deployment.security.SSLv3 = true
deployment.security.TLSv1 = true
deployment.security.mixcode = ENABLE
Section B:
Java Plug-in 10.25.2.17
Using JRE version 1.7.0_25-b17 Java HotSpot(TM) Client VM
User home directory = C:\Users\userA
basic: Added progress listener: sun.plugin.util.ProgressMonitorAdapter@12adac5
basic: Plugin2ClassLoader.addURL parent called for https://myAppletHost.com/download/myApplet.jar
network: Connecting https://myAppletHost.com/download/myApplet.jar with proxy=HTTP @ user-proxy.com/194.xxx.xx.xx:80
network: Server https://myAppletHost.com/download/myApplet.jar requesting to set-cookie with "BCSI-CS-2d4ce94a2ae7b460=2; Path=/"
network: Connecting http://10.x.x.xx:53/ with proxy=DIRECT
                (##THE ABOVE REQUEST CAUSES THE DELAY OR HANGS##)
network: Server https://myAppletHost.com/download/myApplet.jar requesting to set-cookie with "BCSI-CS-2d4ce94a2ae7b460=2; Path=/"
security: Loading Root CA certificates from C:\Program Files (x86)\Java\jre7\lib\security\cacerts
security: Loaded Root CA certificates from C:\Program Files (x86)\Java\jre7\lib\security\cacerts
security: Loading SSL Root CA certificates from C:\Program Files (x86)\Java\jre7\lib\security\cacerts
security: Loaded SSL Root CA certificates from C:\Program Files (x86)\Java\jre7\lib\security\cacerts
security: Loading certificates from Deployment session certificate store
security: Loaded certificates from Deployment session certificate store
security: Loading certificates from Internet Explorer ROOT certificate store
security: Loaded certificates from Internet Explorer ROOT certificate store
network: Connecting https://myAppletHost.com/download/myApplet.jar with proxy=HTTP @ user-proxy.com/194.xxx.xx.xx:80
network: Server https://myAppletHost.com/download/myApplet.jar requesting to set-cookie with "BCSI-CS-2d4ce94a2ae7b460=2; Path=/"
network: Server https://myAppletHost.com/download/myApplet.jar requesting to set-cookie with "BCSI-CS-2d4ce94a2ae7b460=2; Path=/"
network: Connecting https://myAppletHost.com/download/myApplet.jar with cookie "JSESSIONID=0000UQuXWY5tjxjpwcKHlfJKe_8:175oe9j45; BCSI-CS-2d4ce94a2ae7b460=2"
network: ResponseCode for https://myAppletHost.com/download/myApplet.jar : 200
network: Encoding for https://myAppletHost.com/download/myApplet.jar : null
network: Server response: (length: -1, lastModified: Thu Feb xx yy:yy:yy CET 2013, downloadVersion: null, mimeType: text/plain)
network: Downloading resource: https://myAppletHost.com/download/myApplet.jar
                Content-Length: -1
                Content-Encoding: null
Section C:
Java Plug-in 10.40.2.43
Using JRE version 1.7.0_40-b43 Java HotSpot(TM) Client VM
User home directory = C:\Users\userA
basic: Plugin2ClassLoader.addURL parent called for https://myAppletHost.com/download/myApplet.jar
network: Connecting https://myAppletHost.com/download/myApplet.jar with proxy=HTTP @ user-proxy.com/194.xxx.xx.xx:80
network: Server https://myAppletHost.com/download/myApplet.jar requesting to set-cookie with "BCSI-CS-1d67c8b6508ca09c=2; Path=/"
network: Connecting http://10.x.x.xx:53/ with proxy=DIRECT
                (##THE ABOVE REQUEST CAUSES THE DELAY OR HANGS##)
network: Checking for update at: https://javadl-esd-secure.oracle.com/update/blacklist
network: Checking for update at: https://javadl-esd-secure.oracle.com/update/blacklisted.certs
network: Checking for update at: https://javadl-esd-secure.oracle.com/update/baseline.version
network: Connecting https://javadl-esd-secure.oracle.com/update/blacklist with proxy=HTTP @ user-proxy.com/194.xxx.xx.xx:80
network: Connecting https://javadl-esd-secure.oracle.com/update/baseline.version with proxy=HTTP @ user-proxy.com/194.xxx.xx.xx:80
network: Connecting https://javadl-esd-secure.oracle.com/update/blacklisted.certs with proxy=HTTP @ user-proxy.com/194.xxx.xx.xx:80
security: Loading Root CA certificates from C:\Program Files (x86)\Java\jre7\lib\security\cacerts
security: Loaded Root CA certificates from C:\Program Files (x86)\Java\jre7\lib\security\cacerts
security: Loading SSL Root CA certificates from C:\Program Files (x86)\Java\jre7\lib\security\cacerts
security: Loaded SSL Root CA certificates from C:\Program Files (x86)\Java\jre7\lib\security\cacerts
Dump system properties ...
https.protocols = TLSv1,SSLv3
java.vm.info = mixed mode, sharing
java.vm.name = Java HotSpot(TM) Client VM
java.vm.specification.name = Java Virtual Machine Specification
java.vm.specification.vendor = Oracle Corporation
java.vm.specification.version = 1.7
java.vm.vendor = Oracle Corporation
java.vm.version = 24.0-b56
javaplugin.nodotversion = 10402
javaplugin.version = 10.40.2.43
os.arch = x86
os.name = Windows 7
os.version = 6.1
trustProxy = true
active.deployment.proxy.auto.config.url = http://www.userAppX.com/proxy.pac
active.deployment.proxy.bypass.local = false
active.deployment.proxy.http.host = user-proxy.com
active.deployment.proxy.http.port = 80
active.deployment.proxy.same = false
active.deployment.proxy.type = 3
deployment.browser.path = C:\Program Files (x86)\Internet Explorer\iexplore.exe
deployment.proxy.auto.config.url = http://www.userAppX.com/proxy.pac
deployment.proxy.bypass.local = false
deployment.proxy.http.host = user-proxy.com
deployment.proxy.http.port = 80
deployment.proxy.override.hosts =
deployment.proxy.same = false
deployment.proxy.type = 3
deployment.security.SSLv2Hello = false
deployment.security.SSLv3 = true
deployment.security.TLSv1 = true
deployment.security.TLSv1.1 = false
deployment.security.TLSv1.2 = false
deployment.security.authenticator = true
deployment.security.disable = false
deployment.security.level = HIGH
deployment.security.mixcode = ENABLE
PS:
Since the JRE 1.7.0_25-b17 update, it is noticed that when the Java plugin requests for the applet File; it sends a request to the Domain Controller of the user, which causes a delay of 2 to 5 minutes and sometimes hangs.
The problem occurs consistently, and also with JRE 1.7.0_45-b18.
Java Plug-in 10.45.2.18
Using JRE version 1.7.0_45-b18 Java HotSpot(TM) Client VM
User home directory = C:\Users\userA
c:   clear console window
f:   finalize objects on finalization queue
g:   garbage collect
h:   display this help message
l:   dump classloader list
m:   print memory usage
o:   trigger logging
q:   hide console
r:   reload policy configuration
s:   dump system and deployment properties
t:   dump thread list
v:   dump thread stack
x:   clear classloader cache
0-5: set trace level to <n>
cache: Initialize resource manager: com.sun.deploy.cache.ResourceProviderImpl@134a33d
basic: Added progress listener: sun.plugin.util.ProgressMonitorAdapter@1971f66
basic: Plugin2ClassLoader.addURL parent called for https://myAppletHost.com/download/myApplet.jar
network: Connecting https://myAppletHost.com/download/myApplet.jar with proxy=HTTP @ user-proxy.com/194.xxx.xx.xx:80
network: Server https://myAppletHost.com/download/myApplet.jar requesting to set-cookie with "BCSI-CS-f797d4d262467220=2; Path=/"
network: Connecting http://10.x.x.xx:53/ with proxy=DIRECT
network: Connecting http://10.x.x.xx:53/ with proxy=DIRECT
                (##THE ABOVE REQUEST CAUSES THE DELAY AND SOMETIMES HANGS##)

My organization is experiencing very similar problems. We have resolved it through several steps.
We upgraded the client to Java 8 and we saw in the console that the hanging connection with the Domain Controller no longer occurs. This may be all that is necessary for your environment as well.

How do I disable the onboard sound in CMOS?

I have a KT4 Ultra, and I want to disable the onboard sound so I can use my own Soundblaster card. How do I do this? I've looked through the BIOS, and nothing seems to stand out. Do I have to do it on the board itself?

I just downloaded the KT4 Ultra book and will run you thorugh what you have to do....
Your board has "C-Media 8738MX 6-channel audio with SPDIF out" so you will have to disabled it in Bios if you want to use a PCI sound card.
1. Reboot your PC and press "DELETE" to enter Bios.
2. Select "Integrated Peripherals"
3. Scroll down until you see "OnBoard PCI Controller" and then "Audio Controller". (It's last on the list!).
4. Select "DISABLED"
5. Select "SAVE & EXIT SETUP".
6. Turn off your PC.
7. Put your new PCI Sound Card in...I recommend PCI Slots 2-5. Try to keep PCI 1 and 6 clear....
8. Reboot. Your OS will go into "FOUND NEW HARDWARE". Wait until it's done.
9. Put your new PCI Sound card driver CD in and load the new drivers....REBOOT.

With new bios resolved problem of the two controller

Blank I would want to know if with last bios the 7,5 the problem of the controller intel and jmicron that they cannot work together and be resolved.
Thanks.

Quote from: lucabis on 19-June-07, 23:06:12
Blank I would want to know if with last bios the 7,5 the problem of the controller intel and jmicron that they cannot work together and be resolved.
Thanks.
Quote from: Jack the Newbie on 21-June-07, 17:33:56
This time I think I understand him:
Mainboard: MSI 975X Platinum PowerUp-Edition (MS-7246 v.2.1)
He wants to know if the incompatibility issue between JMicron and the Intel RAID controller that appeared with the 7.2x BIOS-Versions has been resolved in the latest official BIOS (7.5). The JMicron controller has to be completely disabled in order to use Intel RAID. One IDE and one SATA port are rendered useless due to this BIOS bug.
HOW??! How you can read his mind??!?

Disable the Select-options field in the viewcontainer

Hi,
I have two select option fields(Date,Number) in a viewcontainer .
Now i need to disable one of the select-option field(Date) in the view container based on the condition.If I give Enability for the view container then both the select options will get diasbled.Is there any way to disable only Date select-option field in the view container.
Thanks in Advance.
Regards,
bala.

Hi,
I just tested this solution and it is working for me....Following on Thomas's suggestion...I did the following....
I just had one select-option on my scr...but it can be done with two too...
step1:
created three attributes at component level under the attribute tab ( as suggested by Thomas )
ENABLE_PRI_SELECTOPTION type WDY_BOOLEAN
M_HANDLER type ref to     IF_WD_SELECT_OPTIONS
M_WD_SELECT_OPTIONS type ref to     IWCI_WDR_SELECT_OPTIONS
Note: all are with public check box checked....so that all your views can see these attributes
I created a method at componenet controller leverl: create_select_option....in this method i have following code:
DATA:
lt_range_table TYPE REF TO data,
* rt_range_table TYPE REF TO data,
read_only TYPE abap_bool,
typename TYPE string.
DATA:
lr_componentcontroller TYPE REF TO ig_componentcontroller,
l_ref_cmp_usage TYPE REF TO if_wd_component_usage.
* create the used component
l_ref_cmp_usage = wd_this->wd_cpuse_select_options( ).
IF l_ref_cmp_usage->has_active_component( ) IS INITIAL.
    l_ref_cmp_usage->create_component( ).
ENDIF.
* get a pointer to the interface controller of the select options
*component
wd_this->m_wd_select_options = wd_this->wd_cpifc_select_options( ).
* init the select screen
wd_this->m_handler = wd_this->m_wd_select_options->init_selection_screen( ).
* create a range table that consists of this new data element
lt_range_table = wd_this->m_handler->create_range_table(
i_typename = 'PERSNO' ).
* add a new field to the selection
wd_this->m_handler->add_selection_field(
i_id = 'PERSNO'
I_VALUE_HELP_TYPE = if_wd_value_help_handler=>CO_PREFIX_SEARCHHELP
I_VALUE_HELP_ID = 'ZHELP_WDA_PERNR'
I_NO_INTERVALS = abap_true
it_result = lt_range_table
i_read_only = wd_this->ENABLE_PRI_SELECTOPTION ).   <-----pls see here how i am controlling the read only property
I assume you know this much...already....but i am just putting everything down....
step2:
in my view where i want to display the select-options....i added this code under my wddoinit method
DATA lo_componentcontroller TYPE REF TO ig_componentcontroller .
lo_componentcontroller =   wd_this->get_componentcontroller_ctr( ).
lo_componentcontroller->ENABLE_PRI_SELECTOPTION = abap_false.    <--pls see initially we want this field to be open
lo_componentcontroller->create_select_option(
step3:
i did not have much logic to control the select option field so i added a button which if user presses the field become disable...
under that button action method i added the following code:
DATA lo_componentcontroller TYPE REF TO ig_componentcontroller .
lo_componentcontroller =   wd_this->get_componentcontroller_ctr( ).
lo_componentcontroller->ENABLE_PRI_SELECTOPTION = abap_true.
   "<---pls see here how i am changing the global *attribute which Thomas has suggested for controlling the "read only" attibute for the select-option field....you can put this under *your "if" statement....
"this step is very important if you do not remove the field you will get the dump...since it will try to add the same field again
"which produces dump from system....
lo_componentcontroller->m_handler->REMOVE_SELECTION_SCREEN_ITEM(
i_id = 'PERSNO' ).
"now call the same method which we created at component level to create the select_options...
lo_componentcontroller->create_select_option(
that is all....it works great for me.....let us know if still have any questions....
Thanks...
AS...

How disable the full screen option in the standard or wireframe video player ?

I was wondering if (and how) it's possible to just disable the full screen option in the controls that appear below the video player (standard or wireframe).
I want to have a video player with the progression bar, play / pause options, the counter without the full screen option because: "When someone clicks the Full Screen button during playback, the video opens in a pop-up window. Any interaction used to transition to a new state in the application does not work."
http://help.adobe.com/en_US/flashcatalyst/cs/using/WS4bebcd66a74275c3-326fcb52123816c0204- 7fed.html
Thanks for your help.
//Catalyster33//

I don't think so from within Flash Catalyst. That is all part of the component. I took a quick look at the docs, and did not see that element at as a parameter. There are only two options I can think of: either build a custom controller in Flash Catalyst (which may not have all the same functionality as the stock controller) or take your project into Flash Builder and modify the controller skin there.
Chris

A bug in Hide Caption Titlebar Plus (2.4.x) causes browser borders to toggle and window content to jump and no addon setting affects this. Can I do anything to fix this except disable the addon?

Hide Caption Titlebar causes the window content to be displaced when mousing over certain areas and controls. These areas includes mousing over the left window edge as well as leaving any control on the topmost area (buttons, location bar, search bar or tab).
When this happens the window content is shifted right and up, approx 10 and 5 pixels, respectively, and a border to be displayed around the full inside of the window area, overwriting existing contents, the border being thicker to the left and bottom, and thinnest to the top. This border disappears after about half a second and the content is shifted back to its original position.
This bug has followed me since FF4 and only disabling the addon makes the glitch go away.

http://ww2.cs.fsu.edu/~rosentha/linux/2.6.26.5/docs/DocBook/libata/ch07.html#excatATAbusErr wrote:
ATA bus error means that data corruption occurred during transmission over ATA bus (SATA or PATA). This type of errors can be indicated by
ICRC or ABRT error as described in the section called “ATA/ATAPI device error (non-NCQ / non-CHECK CONDITION)”.
Controller-specific error completion with error information indicating transmission error.
On some controllers, command timeout. In this case, there may be a mechanism to determine that the timeout is due to transmission error.
Unknown/random errors, timeouts and all sorts of weirdities.
As described above, transmission errors can cause wide variety of symptoms ranging from device ICRC error to random device lockup, and, for many cases, there is no way to tell if an error condition is due to transmission error or not; therefore, it's necessary to employ some kind of heuristic when dealing with errors and timeouts. For example, encountering repetitive ABRT errors for known supported command is likely to indicate ATA bus error.
Once it's determined that ATA bus errors have possibly occurred, lowering ATA bus transmission speed is one of actions which may alleviate the problem.
I'd also add; make sure you have good backups when ATA errors are frequent

The box indicating that this domain controller is the last controller for the domain is unchecked. However, no other Active Directory domain controllers for that domain can be contacted

I have 2 domain controllers running 2003 server, server1 and server2. I ran dcpromo on server1 and removed AD and removed him from the domain and disconnected from network. I then added a 2012 server
with the same name and IP address server1 with no problem. Replication from sites and services work fine on both controllers.
The new 2012 server1 is GC. I transferred all FSMO roles to server1. Again no problem and replicating using sites and services. AD on server1 is populated correctly.
Now what I had intended on doing was a dcpromo to remove server2 from the domain so I can then add another 2012 server. That is when I get the: "The box indicating that this domain controller is the last controller for the domain
is unchecked. However, no other Active Directory domain controllers for that domain can be contacted.
I have DNS installed on both servers and both look good with replicating there. Strange thing is when on the 2012 server within DNS if I right click and connect to another DNS server I can add server2 just fine but from server2 adding server1 it tells me it
is not available.
Help please!

Hi,
As there is server 2012 DC (SERVER1) DC is operational in a domain then "This domain controller is the last controller for the domain" should be remain unchecked when you demote SERVER2 DC.
If you are getting error "Active Directory domain controllers for that domain can be contacted" while demoting SERVER2 DC then check the DNS pointing on both as per below article, disable windows firewall on all DC, less possiblities but worth to check if both
are different site then check the ports are open on firewall.
http://abhijitw.wordpress.com/2012/03/03/best-practices-for-dns-client-settings-on-domain-controller/
http://technet.microsoft.com/en-us/library/cc766337(v=ws.10).aspx
http://social.technet.microsoft.com/wiki/contents/articles/584.active-directory-replication-over-firewalls.aspx
run “ipconfig /flushdns & ipconfig /registerdns“, restart DNS server and NETLOGON service on each DC and try to demote server2 DC.
If issue reoccurs, post dcdiag /q result.
NOTE: If initial replication was completed between both DC (new 2012 and old DC) then you may remove the server2 DC from Active Directory forcefully (DCPROMO /FORCEREMOVAL) and perform metadata cleanup.
Active Directory Metadata Cleanup
http://abhijitw.wordpress.com/2012/03/03/active-directory-metadata-cleanup/
Best regards,
Abhijit Waikar.
MCSA | MCSA:Messaging | MCITP:SA | MCC:2012
Blog: http://abhijitw.wordpress.com
Disclaimer: This posting is provided "AS IS" with no warranties or guarantees and confers no rights.

I cant seem to disable the Subtitles. I have tried on the iPad Settings and on the ATV settings, NOTHING!!

I cant seem to disable the Subtitles. I have tried on the iPad Settings and on the ATV settings, NOTHING!!

If they are actually rendered in the video then you can't turn them off. They are part of the image. That is controlle by the copyright holder. You can only turn them off if they are done as captions.

Error Disabling the Clock Rate on Interface

When i try to disable the clock rate on a Serial interface of a 3640 Router the router returns the following error:
Router(Config-if)#no clock rate 56000
FECPM PM doesn't support clock rate 0
HOw can i disable the clock rate

Hi
I even kept the interface in admin shut mode but it refuses to accept the command no clock rate
After using show controller interfaces serial 0/1
it gives o/p as serail not connected
Kindly see how to remove the command
regards
Sohail JKB

Can you disable the DSL modem on 837 Router

Hello is there any way to turn off / disable the DSL modem on the 837 router? I have shutdown the ATM0 interface but the modem is still trying to train up. I'm trying to disable it as I am now using an external modem with PPPOE.

Hi Jeff,
Hmm, there does not seem to be any command that would deactivate the modem. I do not have such a router handy though - can you enter the global config mode and try writing the controller ? command including the question mark? Is it recognized? If yes, does it allow you to refer to either the ATM or a DSL interface? If yes, try entering the mode provided by the controller command, and use shutdown to deactivate it. As I said, though - I am not sure if this command is supported on your platform. Perhaps try entering the service internal command as the very first command before trying playing with the controller - this hidden command in the global config unlocks some of other hidden features.
In any case, do you have any problems with the modem still running? I understand it is kind of irritating to know that the modem continuously stays up and tries to bring up the link. Then again, it shouldn't do any harm...
Best regards,
Peter

How do I disable the cube effect when switching between accounts?

Hello, I have a friend who wants to turn off the animated cube effect that happens when they switch between theirs and their wife's accounts. After a lot of googling I am not having much luck finding out how to do it. Does anyone here know?
Interestingly, you can see what a difference it makes by loading "Quartz Debug" and unchecking "Enable Quartz Extreme" - makes fast user switching really fast! But I don't want to permanently disable Quartz Extreme, I just want to turn off this one animation.

You can't disable the animation, as it is a part of the system/account controller as far as I know.

Disable the approve button when ever nonapprover login

Hi Friends,
i want to disable the approve button , when ever non approvers login into that requisitions page. please let me know, how to do. only approvers will have to see that approve button. can we achieve through OAF personalizations or Extensions.
Thanks
vamshi.

Hi,
You can extend the Controller of that page and in extended controller on page load
Capture the Requistion details and valid approvers from a Prepared Statement.
Then match the Approvers with the Login user name (pageContext.getUserName())
If the user name is not there in the valid approvers then set the disabled property of button to true,
bean.setDiasbled(true);
Thanks,
Gaurav

Disabling the IRda controller

Similar Messages

Maybe you are looking for