Discount for cumulative qty in PO

Hello,
I would like help to setup the following scenario:
Vendor would like to pass discounts on the qty. we buy. However the requirement from the client is that we want to see the discounted price in the PO only and not get any subsequent settlement or after the PO is processed.
Ex: when we reach 200,000 and buy 200,001th piece that piece should be at a discounted price given by the vendor. ( not the regular scale setup) .
pls advice,
thnx in advance.

Hi,
Couldn't you just have one contract that you call off against with the target qty of the first "price break" qty.
Then have a second contract that is blocked for anything above that qty.
that way the user can reference the 1st contract until the target has been reached, then you simply unblock the second contract (with the reduced price) and start using that from that point onwards.
Or you could even try it with twwo lines on the SAME contract but the second line is for the reduced price but it is blocked until the target has been reached?
I don't think that you will find a nice clean way of doing this and so whatever happens you will have to use a workaround and the secret is to use the workaround with the least effort.
Both of these solutions are similar to the one that Charlie has proposed.
Steve B

Similar Messages

  • Blank needed for cumulative Key Figure

    Hi All,
    here's what my BEx report looks like when I run (after 10AM and before 11AM)::
    Hour            Qty          CumulativeQty
    7AM            10                    10
    8AM            20                    30
    9AM            15                    45
    10AM          13                    58
    11AM                                  58
    12PM                                  58
    But, here's what my BEx report should look like when I run (after 10AM and before 11AM)::
    Hour            Qty          CumulativeQty
    7AM            10                    10
    8AM            20                    30
    9AM            15                    45
    10AM          13                    58
    11AM                                         
    12PM                             
    Any suggestions

    Try this If.. Else Formula for Cumulative Qty
    ( Qty KF < > 0 ) * Cumulative Qty KF + ( Qty KF = = 0 ) * 0
    Finally set Zero as space in Query global properties.

  • Volume discount for whole month

    Hello sir's
    I am having one querry,
    i maintain the time dependent condition Volume discount (zvls),
    For EX:
    I want to calculate the zvls for aspecific period,
    suppose i created 10 nos of purchase order, post a GR and also settled the payment for that vendor in 1 month period,
    now my purchased quantity is reaced 500 Kg and i set a discount quantity based
    Qty       Disc
    100       20 Rs
    200       22 Rs
    500       25 Rs
    Now i want to take the discount from vendor,
    what i suggest that its only possible only in credit memo against that vendor with all other values taken manually.
    But they want to pick the condition for whole month automatically and calculate the discount for quantity for that period.
    plz suggest.

    Hi,
    I had also once faced with the same problem but i am unable to provide a solution to my client. Instead if you  configure the rebate agreement settings and process a rebate agreement for the same to avail the discount.
    Also you can have multiple line items of the same material in the PO with the varying price. But this is quite manual and tedious too.
    Regards,
    RitiG

  • Develop a report to track discount for various product

    hi
      i need to develop a report to track discount for various product depending upon the client

    Hello Noor,
    I'm not sure but if you are talking about the marketing attributes, you can definitely use FM - CRM_MKTBP_ASSIGN_ATTRIBUT_TAB
    You need to pass the profile id, partner id and marketing attributes data. Thats it.
    I think the FM you ar eusing for terrritory is fine. It should work.
    I hope this helps.
    Thanks
    Vishal

  • How to forbid any further changes for PO (QTY and price ) after it has been

    Hi,
    How to forbid any further changes for PO (QTY and price ) after it has been done GR and LIV? Thanks.

    Hi,
    Price anyway cannot be changed once GR is posted on the PO item, it can be changed only by cancelling the GR, the same applies to IR too.
    But quantity can be changed at any time.
    So if you are looking at blocking qty too, then a customized message through save exit is the option, I am not aware of any standard SAP messages that can be configured to achieve this..
    Ramesh

  • How to forbid any further changes for PO (QTY and price )?

    Hi,
       How to forbid any further changes for PO (QTY and price ) after it has been done GR and LIV? Thanks.

    Better to post this in logistic forum.
    THere will be some config option to do so but normal FI perosn would need to dig deep, a MM perosn should answer quickly.
    Reg
    Hein

  • * Values for Billing QTY in a Report

    Dear SDN,
    I am getting some values for Billing Qty as star (*)...in a Credit memos Report (SD)..
    I am using 0SD_C03 InfoCube..
    I have checked in the PSA also.. Data is available... Some value should come...but * is coming
    Help will be greatly appreciated with points..
    Thanks in advance...

    Thanks...
    But after doing the same way .. i am not getting any Units...
    Not getting * but values are ok...But without any units
    But Now client may ask to me..How to identify which are expressed in NO and TO and KG...
    Please help me out to resolve it
    Indeed, Thanks a lot for your help...

  • Z report for opening qty of material date wise

    I have to develop a zreport which will calculate date wise opening  stock of material   and closing stock of that material at particular
    location ( not to use standard reports)
    I have to display sale qty and stock transfer qty  date wise.
    Similarly receipt qty  date wise.
    For sale qty, stock transfer qty and receipt calculation are date wise ok. But problem is to get date wise opening and closing stock of particular material.
    is it possible to get location wise material wise date wise opening stock list  in z report.
    Thanks

    Hi Ravikumar,
    Hope you are an ABAPer. If not also, you can achieve this through an ABAPer. As mentioned by others, you need to check whether your requirement is met by the standard transaction MB5B. You need to check whether this transaction gives you the exact opening and closing balance for a material. If this gives what you want, then you need to make some small enhancement in the MB5B report program so that you will be getting the result of the opening and closing stock. In this enhancement you will use EXPORT to export the result to your program where you can IMPORT it. This procedure is explained in detail in a document created in SCN dated 30th November, 2012 by Sijin Siji. Have a look in that.
    That document is descriptive and it will be helping you in solving this issue. If you have any doubts, please revert back.
    Regards,
    Abijith

  • How can i create a drop down menu for set qty in my store?

    I'm wondering how i can create a drop down menu for the qty module that sits on the individual product page. My client sells in quantities of 6 packs. I currently have the minimum order at 6 but i would like to give consumers the option for 6,12,18...and so forth. I was told that it could be accomplished? Hopefully someone can help me.

    Hi Chris -
    Thank you for your reply! I had seen your article before, and just now again attempted to follow it, but I get stuck. There are two things that I'm confused by.
    First off, toward the top, referring to the initial button, you say to add this interaction:
    ON CLICK; Play Transition to comboBox: selected
    ON ROLL OUT; Play Transition to comboBox normal if comboBox is in over state
    ON ROLL OVER; Play Transition to comboBox over if comboBox is in normal
    However, I do not see these transition options. When I select the button, the only interactions I have are to Play transistion to state, Play action sequence, Go to URL, and two for videos. So that's the first roadblock for me.
    But, trying to get passed that, I went down to the portion of the article that refers to adding interaction to the dataset items. Again, I don't get it, as I see no way to add interaction to a dataset item. When I open my design-time data menu, I do see the items, and am able to rename each item, add additional rows, and change the shape of the datalist layout. However, I see no way to add an interaction to a dataset item. I must be missing a step ... Can you help with this?
    Again, thank you!
    Amy

  • Multiple invoices for single qty in PO

    Hi
    We have created the purchase order for 1 qty and cost is : 500000 Rs . The Account Assignment category is F ( Order ) of the purchase order. Becuase we are settling the total cost from order to AUC.
    Unfortunally we have received the multiple invoices from vendor of amount : 240000 aganist the same PO. Now we want to do the single MIGO for 240000 Rs and then we can do the multiple ( Number 1 to 4 in below ) MIRO for same amount . Finally we can settle the amount 240000 to AUC in this month.
    We have tried with percentage opition in MIGO but it is not working for us becuase our system is allowing upto 3 number of digists for decimal of percentage.
    Eample : PO  details :   qty - 1 & cost - 500000
    *Reived Invoice from vendor :  Number 1 - 60000*
                                                    Number 2 -  70000
                                                    Number 3 -  80000
                                                    Number 4 -  30000
    Please note : yet to not received the invoice amount : 260000 Rs for same PO
    Please let me know the process to complete the above requirement.
    Thanks
    Risha

    Hi,
    while doing MIRO we have to give proportionate quantity for the given invoice value..
    Quantities to be updated for four Invoice are as follows:
    Invoice Value : 60000     70000     80000     30000
    Quantity:          0.12     0.14     0.16     0.06
    Thanks and Regards,
    Padmaja

  • How to Calculate Net weight, Gross Price, Surhcarges for  Confirmed Qty

    Hello,
    I have a requirement where I need to calculate the Net weight, Amount( gross price), Surhcarges etc.. for the Confirmed qty of
    a sales order item. In SAP standard the pricing procedure will run for the Order Qty and all the prices are related to Order qty, not for Confirmed Qty. Confirmed Qty will be sum of all scheudle lines qty.
    Is there any standard Function Module to get the prices and weights for Confirmed qty? Just  I need to display this data in a Report.
    Pelase advise me.
    Thanks.

    Hello,
    Instead of simulating the order I am using the User Exit so that that actaul values will appear in item conditions tab. I am using the Exit USEREXIT_PRICING_PREPARE_TKOMP  where I am doing the sum of the scheduled lines confirmed qty and passing the same to TKOMP-MGAME field and the pricing is calculation is done for the confirmed qty. But I am facing some problems when the order has credit block. When the order credit is released via VKM3, the pricing doesn't updated. When doing the credit release, the order cofirms the full order qty and the pricing(Gross price) is not getting updated.
    How can we run the pricing update in Order change mode with pricing procedure as 'C'.
    Did anyone has worked on this type of req? let me know your thoughts.
    Thanks.
    prabha

  • Can you recycle your i pod shuffle for gift card to apple or get a discount for another apple product?

    Does anyone know if you can recycle your ipod shuffle to apple for a gift card or discount for another apple product?

    This page describes the programs
    http://www.apple.com/recycling/
    At the bottom, it says "10 percent discount does not apply to iPod shuffle."

  • Is there a student discount for Photoshop CS6?

    I am slightly confused about this, looking for an answer on my own I went through this process:
    I found the page for the Creative Suite 6 Products, and on the right side it says "CS6 or Creative Cloud? If you want all-new versions of your favorite creative software — including Photoshop CC and Illustrator CC — join Creative Cloud. If you prefer the previous version, CS6, you can purchase it here. For upgrade eligibility and purchasing options, see the Creative Suite 6 FAQ."
    So, I went to the Creative Suite 6 FAQ, where I saw the question, "Does Adobe offer education discounts?" with the answer, "Yes. Qualifying full- or part-time students, faculty, and staff of accredited educational institutions can purchase Adobe products at a reduced price." So, I poked around on the checkout page for Adobe Photoshop CS6, but there seemed to be no way to apply an education discount. I then clicked the Purchasing FAQ link on the checkout page, next the Education FAQ link, and from there the student and teacher product catalog under purchase options, but Creative Suite 6 is not listed in any form. The only options presented on the page are Creative Cloud Membership, Photoshop CC, Photoshop Lightroom, Creative Cloud Photography Plan, Photoshop Elements 13 & Adobe Premiere Elements 13, and Photoshop Elements 13.
    Is there another spot with other student discounts, is the CS6 FAQ misleading and there's not really a student discount for CS6, or am I missing something else?
    Thanks for the help!

    Hello,
    all my German sources say "Die Produktion von Adobe Creative Suite 6 sowie Photoshop CS6 Extended, Flash Professional CS6 und Dreamweaver CS6 als unbefristet nutzbare Student and Teacher Edition für Lehrer, Schüler und Studenten wird zum 28.02.2014 eingestellt" >>> translated, something like: ""The production of Adobe Creative Suite 6 and Photoshop CS6 Extended, Flash Professional CS6 and Dreamweaver CS6 as unlimited use Student and Teacher Edition for teachers and students will end at 28.02.2014", see:
    http://www.cobra-shop.de/8833-Produktionsende-Adobe-CS6-Student-and-Teacher-Editionen-f%C3 %BCr-Lehrer-Sch%C3%BCler-und-Studenten
    Adobe's link you will find there: https://store1.adobe.com/cfusion/store/html/index.cfm?event=displayProduct&categoryOID=725 3698&store=OLS-EDU
    Hans-Günter

  • NON PROFIT ORGANIZATIONS. Does Adobe envisage a discount for CC or single app subscription?

    Do you know if Adobe envisage a discount for CC or single app subscription dedicated to non profit organizations?
    How can I contact the Marketing division?
    Thank you.

    Non-Profit http://www.adobe.com/volume-licensing/non-profit.html

  • Post-Capitalization of Cash Discount for Asset

    Hi,
    We are in ECC 6.0 and have activated Document Splitting.
    Further, have provided asset field in Define post capitalization of cash discount to assets in Document Splitting of SPRO.
    After the both, my expectation is to see the entry as stated by SAP in the scenario of Post-Capitalization of Cash Discount for Asset.
    But unfortunately, the discount amount is not being capitalized on the payment date, but is being posted to cash discount account.
    Kindly let me know what mistake i might have carried for this.
    Thanks and Regards,
    Purna.
    Scenario: Posted invoice for asset purchase using F-90 with payment terms as 2% cash discount if paid within 15 days.
    Assume: Asset purchased on 06.01.2012 and as per the payment term if paid before 20.01.2012 i will get 2% cash discount.
    Have made the payment to vendor using T-code F-53 on 10.01.2012, even though i see a cash discount is being calculated as required, but the account is an cash discount received account. Instead, what i was expecting is the asset account.
    Hope, my question is being clear and i will look forward for a reply.

    Hi,
    Please check your config below.
    IMG->FA->AA->Transactions->Acquistions->Prevent Subsequent Capitalisation of discounts...
    If the indicator is set for your company code, system will not capitalised the subsequent discounts.
    Regards,
    Srinu

Maybe you are looking for