Discount header condition should adjust automatically in line items

Hi,
I have a discount header group condition which is adjusting automatically in line items based on net price. Even if I delete one line item out of two lien items, header discount value is adjusting to balance 1st line automatically. This is hapneing in QT and in sales order without reference, but not hapening for sales order where I referenced with quotation.
Ex: I have created QT with ZD03 = -2000. This distributed for line item 1 as -1500 and 2nd line item as -500. (Here in QT if I delete the 2nd line item, then ZD03 for 1st line item is automatically adjusted as -2000 and header remains same as -2000). Now if I converted this QT to SO with same 2 line items and then in that SO if I delete 2nd line item, ZD03 for 1st line item remains as -1500 only and header changing from -2000 to -1500.
I don't want this to happen. I want the header value to remain same as -2000, irrespective of what I do for the sales order line items.
Kindly suggest.
Ratna

Hi,
Just test your requirement by going into the Condition type configuration TC V/06 for the "ZD03" ,under changes which can be made remove the Header condition and mark it as item condition and try the sales cycle.
Regards,
Ravi

Similar Messages

  • Header Condition not to impact the line items

    Hi Gurus,
    The customer has a requirement where they want to add manual condition in the header at the time of Billing. These conditions will be absolute values (Fixed Amount).
    I have created the relevant condition but the problem is as following:-
    If there are 10 line items on the invoice and the user gives 1 USD at the header level the system assumes this 1 USD for each item on the Invoice and hence the value is summed up to 10 USD.
    The requirement is that this should remain as 1 USD on the header.
    Pl. tell me if there is any standard routine available to achieve this.
    Thanks.
    Edited by: Sunny SD on Feb 2, 2012 2:31 PM

    In t.code V/06, for the condition type, check the box group condition and maintain value 2  in the group condition routine. Then test again. Note that the header value will always split and distribute to all line items depending on the settings of the condition type.
    Regards,

  • How to assign profit center to automatically generated line items

    Hi, Experts,
                       My problem is that I want system automatically assign profit center to automatically generated line items.
                       Eg.
                             (Vat is @ 10%)
                                        Transaction                             Amount                            Profit Center                    
                              Purchase                   Dr                    Rs.1000/-                           XYZ
                              Vat                             Dr                    Rs.100/-
                              To Vendor                  Cr                                      Rs 1100/-
    Here I have to assign Profit Center in VAT G/L by double clicking on it, in reality, system should automatically assign profit center to VAT G/L same as to purchase, because this vat amount belongs to same purchase G/L.
    Kindly help me
    Thanks in advance

    Hi,
    1. In which SAP version you are working ? Are you using SAP 4.7 or ECC 6.0. ?
    2. If you are in ECC 6.0, have you activated New G/L ?
    3. Segment reporting is happening with Profit Center is one of the scenario ?
    Auto updation of Profit Center will depend upon these conditions. Accordingly one can provide you the solution.
    Regards,
    Shridhar

  • FB60 - Substitution rule to generate Text in automatic generated line item

    Hello SAP genious,
    While we post vendor invoice ( FB60) and customer invoice (FB70), at this time along with Dr and Cr line items one automatic additional line item is getting generated this is based on Tax type which you select while making invoice.
    now, I want to show some text in this automatically created line items. This might be possible by creating some substitution rule but i am not sure.
    and if it is possible through substitution rule then what could be my prerequisite, and check would be..?????
    can you please tell how can i get Text in this additional line item getting created due to VAT tax code.
    Thanks a Lot for your input.
    your reply will be rewarded with points.
    Thanks
    Jignesh

    Thanks for all your replies.
    I Want the field BSEG- KOBEZ i.e description field in the accounting doc of the offsetting entry to be replaced in the GL account  text field.
    Ex :
    PK    Account        Description                  Amount           Text
    31    100000         Furniture  Vendor             50             Sales
    40    1999             Inter Compy                     50             Furniture Vendor
    I want the description of offsetting entry vendor description i.e Furniture vendor (field BSEG-KOBEZ) to be replaced in GL line item text BSEG-SGTXT.
    I cant find the field BSEG- KOBEZ while i search in the substituion to replace in Text field.
    How do i write in substitution to say that the offsetting entry description should be in text field of GL account.

  • Change of additional acct. assignment in automatically created line items

    Hello,
    How can we change the additional account assignment of automatically created line items in transaction MIRO. In my case the tax line item is created automatically in MIRO.
    I am able to change the account assignment of consumption line item. But not Tax line item.
    Best Regards,
    Tapan

    But FBZP is for APP not for Tax line item. Is it possible to change the additional account assignement (from cost center to internal order) in tax line item in MIRO.
    Best Regards,
    Tapan

  • Tax Cide Field as editable for Automatically created Line Item

    Hi
    How can we make the tax code editable for automatically created line item, when an FI Document is simulated.
    Thanks & Regards
    Sanil K Bhandari

    Hi
    I want to edit the line item which has been created by the system, when the document is in simulation mode. The entry has not been posted yet.
    Thanks & Regards
    Sanil K Bhandari

  • RWIN to automatically add line items in FI document

    Hi all!
    I wish to know if is possible to automatically add line items in a FI document via RWIN and how.
    My final goal is the following:
    A user try to create an FI document with FB01 transaction.
    He/She insert the appropriate line items manually.
    He/She press the "Simulation" button
    In simulation screen there are user's line items, PLUS some more that are necessary in some circumstances.
    Is it possible to achieve this scenario?

    Hi Marinos,
    i think it's  possible via table <b>TRWPR</b> and an
    appropriate function module but it's hold for a modification by SAP.
    other possible solutions:
    - user exit ?
    - interface ( e.g. Intranet-appl. / excel)
      and posting via RFBIBL00 / BAPI
    regards Andreas

  • Tax code input for Automatically Generated Line Items

    Hi Guys,
    We want to input a tax code for the Automatically generated line item..for exchange rate differences in F-28.
    Once i simulate the F-28 , and i try to input the tax code in the Automatically generated line item for exchange rate difference,
    I cannot input the tax code in that screen..and it is greyed out.
    Is there a way we can assign a tax code for this GL account line item that is automatically generated by the system ?
    Thanks,
    Srikanth.

    Hello,
    you have to add the tax code in GL master data. if that's not possible (several codes possible), I would set up a substitution.
    kr
    Nico

  • Error " TR should have atleast one  line item "

    Hi,
    While trying to create TO for the TR , system through the error " TR should have atleast one  line item "
    but the TR have the line item.
    pls trhu some light. actually it properly working in development server but not working in production.

    Hi
    Thos error message does not make any sense if what you are saying is true in that the TR does have one line item.
    The only thing I can think of is Has the stock situation changed since the TR was created.
    Do you in fact have any stock?
    Check the TR in LB02 to make sure it is OK
    I hope that this helps
    Frenchy

  • Automatically created line items will be deleted-Withholding tax

    Dear Experts,
    Please let me know the reason for generating message as Automatically created line items will be deleted while simulating.On second simulation onwards,TDS entries is deleting and the same is disappearing on posting.

    Hi,
    You might be getting this error while do clearing of vendor who is liable for withholding tax.
    You are getting this error because you have to do payment of Withholding tax.
    If this is not the scenario please revert with exactly when you are getting said error.
    Regards,
    Tejas

  • EDI order to automatically reject line items that cannot be allocated( AFS)

    Hi All
    The requirement is as follows
    1. A specific type of customer EDI order enters SAP via IDOC
    2. We need to identify these specific orders in SAP and have the ability to automatically reject lines that cannot be allocated (AFS allocation)
    3. What are our options using standard functionality of SAP/AFS?  Iu2019d prefer an element other than a new doc type.  Something such as order reason, or Purchase Order Type (preferred)
    4. How is this possible?
    Appreciate your quick help and response.
    Thanks
    Yella

    Hi Roja,
      After seeing your query it can be done through user exit only,there is no option in standard.
    User exit in program MV45AFZZ - USEREXIT_MOVE_FIELD_TO_VBAP or
    MV45AFZZ - USEREXIT_SAVE_DOCUMENT
    take ABAPer help he can fix the problem
    in the program you can tell in which conditions the order should be created with automatic reason for rejection.
    Regards
    Ram

  • SAPF181 discount program not posting material to FI line item

    We are having an issue with the SAPF181 discount program. Currently when we run it it makes the adjustments for the fields that the documentation states it should, but we need the material in the Coding Block section of the line items to be filled in, which it is not currently doing or does not seem to be an option anywhere on SAPF181. The reason we need this is that although the material, or product, is on the Profitability Segment, it is not on the FI line item and because of this it does not flow through to PA, which is where our issue lies.  Does anybody out there know how we could get this material filled in for the FI line item when running the SAPF181 program?

    Hi,
    BKPF-TCODE = 'F-02' is not the right field: you should use SY-TCODE, as BKPF-TCODE is not the exact transaction that the user enters. Also, as general rule, if your subsitution does not work, you can set a trace and run the transaction: you'll see exactly which condition is incorrect.
    Regards,
    Eli

  • Header data in xml tags and line items in fixed length but both in same fil

    Hi,
    In my scenario target side in header level i am passing all the values are fixed values and line item vaues are getting from the source data.how to write udf for this scenario.It should be graphical mapping.
    Please help to me
    please reply fast
    Thanks&Regards
    Swathi
    Edited by: SWATHIP on Feb 4, 2011 7:16 AM

    Hi,
    1) If your values are numerical you can use the "FormatNum" function under Arithmetic Functions.
    This will help you fix the length of the number and even the decimal part.
    2) If you want to fix the length of field which is of type string, you can try the following code:
    public String setLength(String var1, String var2,  Container container) throws StreamTransformationException
         /*   var1 will have the String Value, in var2 pass a constant integer of fixed length you want  */
         int len = Integer.parseInt(var2);
         String rslt = var1;
         if( var1.length() < len)
             for(int i = var1.length(); i < len; i++)
                 rslt = rslt + " "; // appending space
         else
               rslt = rslt.substring(0,var1.length - 1)l
         return rslt;
    regards,
    Aravind
    Edited by: ajnayak on Feb 7, 2011 7:25 AM

  • Automatic 2nd line item in sales order

    Hi All,
    We are using variant configuration.
    I have one requirement where if i input the first line item in sales order for a material, system should automatic input 2nd line itme of another material based on configuration mainatined.
    Please let me if it is possibel.
    Regard,
    Satyajit

    Dear Satyajit?
    Material based on configuration mainatined.
    What do you mean by the above statement? Whether you are looking for such a configuration
    or
    that you have maintained such combination somewhere in the system?
    Have you checked the possibilities of using a BOM?
    You can also check the possiblity of material listing.
    Thanks & Regards,
    Hegal K Charles

  • Header data not getting updated in line item level

    Hi,
    We are trying to update Pricing date at header level but it is not gettting copied to item level.
    getting an message "The header business data does not apply to item xxxx"
    i have checked the item category and "business item" field is checked. and for the same sales order previously we were able to change the pricing date at header level and it got applied to item level but this time is is not getting applied.
    kindly suggest.

    If there are multiple line items which are having different data; in your case, Pricing Date, then in that case, when you try to change at header level, system will pop up this message.
    You can also have a look at the following note:-
    Note 336660 - Message V1403 in sales order with article order no
    G. Lakshmipathi

Maybe you are looking for

  • How to load classes dynamically?

    Hi all! I have folowing problem. In my applet I need to load different classes form the same Web server. The main class is located in parent directory and different are in it's subdirectories. Security Manager allows to do this, but I find it difficu

  • Referring to startpage by clicking a button

    Hello to all, I have a bsp-application (MVC) with two controllers. When I fire an event in the second controller, the first controller is called. But this is wrong. Why? Please can someone help me? Thanks in advance. Andreas

  • Error message: Unknown error (-69)

    Recently, when I sync new songs to my iPod, all it will do is sync one, two, or even no songs and then stop syncing. This error message will come up: "Attempting to copy to the disk "CAMERON'S I" failed. An unknown error occured (-69)." "CAMERON'S I"

  • My iPhone does not synced with windows 7 but synced with windows Xp

    My iPhone does not synced with windows 7 but synced with windows Xp

  • Connection element

    I am creating a class to handle all my DB access stuff.... I set up a connection instance variable to use when I need it. I will close it at the end of the app. Is this practice acceptable or should I be reconnecting each time?