Discoverer 11g - How to get Sales Data in different periods?

Good afternoon,
I am currently using Discoverer 4.1 and I can run reports that display all of these different types of sales.
I have a Cross tab and I want 5 columns showing the Sales below.
2013 Month Sales, 2013 YTD Sales, 2012 Month Sales, 2012 YTD Sales, and 2012 Total Sales
I installed Discoverer 11.1.1.3 and I copied my reports over, but no sales show up.
Does the NEW Discoverer need different calculations or conditions?
I couldn't find anything on it.
I have all of these checked.
My Conditions:
Short Date Range = '2013' AND Month = 'FEBRUARY'
My Calculations:
2012 Total = CASE WHEN "Year" = '2012' THEN Net Selling ELSE 0 END
2012 YTD = CASE WHEN YearMon IN ('201201', ‘201202’) THEN Net Selling ELSE 0 END
2012 Mth = CASE WHEN YearMon = '201202' THEN Net Selling ELSE 0 END
2013 YTD = CASE WHEN YearMon IN ('201301', ‘201302’) THEN Net Selling ELSE 0 END
2013 Mth = CASE WHEN YearMon = '201302' THEN Net Selling ELSE 0 END
Keep in mind, these conditions and calculations work perfectly in Discoverer 4.1.
Any help is appreciated.
Let me know if you require anymore information.
Thanks,
Andy Hoang

Have a look at the following note:-
Note 1573200 - How to restructure the statistic data of the sales information system (SIS)
But before trying to carry out the process as detailed in the above note, first check with other SIS reports like MCTA etc., and no reports are showing correctly, then you can proceed. Otherwise, you need to raise an OSS message with SAP.
G. Lakshmipathi

Similar Messages

How to get a date on different pages?

Hey everyone, I am working on a daily planner for the office and have a script that automatically generates the dates but I don´t know how to get each of the dates on a different page. I'd really appreciate if anyone could help me get each date generated by the script on teh following page of my 365 page document. The scrip is:
var months = [ "Jan", "Feb", "Mar", "Apr", "May", "Jun", "Jul", "Aug", "Sep", "Oct", "Nov", "Dec" ];
var length = [ 31, 28, 31, 30, 31, 30, 31, 31, 30, 31, 30, 31 ];
var days = [ "Sun", "Mon", "Tue", "Wed", "Thu", "Fri", "Sat" ];
count = 0;
day = 0;
month = 0;
weekday = 5;
str = "";
while (count < 365)
count++;
str += days[weekday]+", "+(day+1)+" "+months[month]+"\r";
day++;
if (day >= length[month])
day = 0;
month++;
if (month > 11)
   month = 0;
weekday = (weekday+1) % 7;
app.selection[0].contents = str;
Tanks!

Try this,
app.activeDocument.viewPreferences.rulerOrigin = RulerOrigin.pageOrigin;
app.activeDocument.zeroPoint = [0,0];
with(app.activeDocument.viewPreferences){
    horizontalMeasurementUnits=MeasurementUnits.points;
    verticalMeasurementUnits=MeasurementUnits.points;
    rulerOrigin=RulerOrigin.pageOrigin;
var months = [ "Jan", "Feb", "Mar", "Apr", "May", "Jun", "Jul", "Aug", "Sep", "Oct", "Nov", "Dec" ];
var length = [ 31, 28, 31, 30, 31, 30, 31, 31, 30, 31, 30, 31 ];
var days = [ "Sun", "Mon", "Tue", "Wed", "Thu", "Fri", "Sat" ];
count = 0;
day = 0;
month = 0;
weekday = 5;
str = [];
while (count < 365)
count++;
str[count]= days[weekday]+", "+(day+1)+" "+months[month]+"\r";
str1 =str.toString();
day++;
if (day >= length[month])
day = 0;
month++;
if (month > 11)
   month = 0;
weekday = (weekday+1) % 7;
for(i=0;i<document.pages.length;i++)
var myTextframe = document.pages[i].textFrames.add({geometricBounds:[0,0,50,150]});
myTextframe.insertionPoints[0].contents=str[i+1];
Vandy

OIM 11g - How to get modified data on a reconciliation event

Hi,
We're running OIM 11.1.1.5.2 with Ad (9.1.1) , exchange ( 9.1.1.7), dbum (9.1.0.4) and dbat (9.1.0.5) connectors.
When we run reconciliation we can get the recon data on the event management tab of the advanced administration console, but, update succeded events show all fields mapped on the reconciliation with the new values only. For example, for AD, if an account on the target resource has its "TelephoneNumber" field updated, we can see the event, but, we cannot identify what was changed on that event was the telephone number, as the event shows all fields on the Ad account...
Our requirement is to inform th customer as soon as the reconciliation has ocurred for each particular updated account, in a manner that is fast and easy to understand.
We have the audit on OIM on Resource Form (XL.UserProfileAuditDataCollection) and we can see the upa tables being populated.
Now, the question is, what is the recommended or most used way to process the information on upa tables? Is there any ootb report that maybe we're missing that shows this info? Are there api's documented to work with audit data (i just couldn't find them)?
Having in consideration our requirement, I'm thinking on creating a new task for each process form to be triggered by "Reconciliation Update Succeeded" that executes a pl/sql to find events on upa tables related to the user and resource, then parse the generated xml and send an email with old and new values, but I want to be sure there's no ootb or simpler way to do it.
Thanks.

Thanks Kevin,
I think that we found an easier way though. By setting the system property XL.EnableExceptionReports to TRUE, the tables UPA_FORMS y UPA_FORMFIELDS get populated automatically.
This tables contain information of the fields that were modified an the reason (i.e. 'Reconciliation', 'API').
I have created a database job that executes a stored procedure that searches for new records on upa_ud_formfields and gets the resource name, resource key, field name, old and new values and then sends an email with all modified data to the corresponding administrators for each resource. I use an auxiliary table on a different schema to keep track of records already read on previous runnings of the job.
It takes sometime to get the info because we depend first on the running of the recon scheduled job, then the "issue audit message task" job, and finally our own job, but it works.

How to get start date of the period for a given date from cube

I have a situation where i need to find the start day of the period for a given date. is there a way to know that. i want to use that in my report. i enter the date from my report(i have date parameter), depends on the date, i want to display the start day
of the period. how can i write expression for that in my report?
ram

Hi ramprasad74,
According to your description, you are using Analysis Services as a data source for the report, the cube has hierarchy: Fyear, FQuarter, FPeriod, fweek, Fdate. You want to add a date parameter to the report, after you changed value of the parameter, the
report will return the first day of FPeriod.
To achieve your goal, we need to add a parameter to the report, then use the parameter in mdx query. For detail information, please refer to the following steps:
In the Report Data pane, right-click on a dataset created from a SQL Server Analysis Services data source type, and then click Query. The MDX query designer opens in Design mode.
On the toolbar, click Design to toggle to Query mode.
On the MDX query designer toolbar, click Query Parameters symbol. The Query Parameters dialog box opens.
In the Parameter column, click <Enter Parameter>, and then type the name of a parameter.
In the Dimension column, choose a value from the drop-down list.
In the Hierarchy column, choose a value from the drop-down list.
In the Default column, from the drop-down list, select a single value.
Click OK.
In query designer dialog box, type the mdx query like below:
with member [Measures].[FirstChild]
as
[Date].[Fiscal].currentmember.parent.firstchild.name
select {[Measures].[FirstChild]} on 0,
[Date].[Fiscal].[Date].members on 1
from
( SELECT ( STRTOSET(@ParameterName, CONSTRAINED) ) on 0
from
[Cube]
Here are relevant threads you can reference:
https://social.msdn.microsoft.com/forums/sqlserver/en-US/c7146ac3-40ea-4d53-b321-c707aebbd405/how-to-pass-date-parameter-to-mdx-query
https://social.msdn.microsoft.com/forums/sqlserver/en-US/fd12a865-bc90-4a65-af42-ce38a8cfa29b/pass-date-time-parameter-to-mdx-query-ssrs
If you have any more questions, please feel free to ask.
Thanks,
Wendy Fu
If you have any feedback on our support, please click
here.

How to get / configure data in Tcode "MCTG" for "SIS: Sales Office Analysis Selection "?

Hello SAP Guru's,
How to get / configure data in Tcode "MCTG" for "SIS: Sales Office Analysis Selection "? We have implemented SAP ECC 6.0 EHP4 version in the organization. If anybody have any idea, need help .
Thanks in Advance.
Prashant Kunjir

Have a look at the following note:-
Note 1573200 - How to restructure the statistic data of the sales information system (SIS)
But before trying to carry out the process as detailed in the above note, first check with other SIS reports like MCTA etc., and no reports are showing correctly, then you can proceed. Otherwise, you need to raise an OSS message with SAP.
G. Lakshmipathi

How to get sales order data in substitution of fi-docu from GM posting ?

How to get sales order data in substitution of FI documents from goods movement posting?
When I posting a material document with movement type "501E", the system will creating a FI document automatically. And I need to get the sales order data in the substitution of FI document.
I tried to export the data of the material document in user-exit "MB_CF001 Updating of material document data upon posting", but this user-exit does not triggered in the posting process at all. what's the problem?
Do you have better solution or idea for this? Please help me. Thank you!

Hello Harish,
Please use BAPI_BUSPROCESSND_GETDETAILMUL to read details of sales order. This works as a remote enabled counterpart of CRM_ORDER_READ.
Similarly if you want to display sales order from R/3, use FM BAPI_BUSPROCESSND_DISPLAY.
Regards
Kaushal

How to get sales order item information

Hello All,
I ahve defined a new, custom condition type and created a routine in alternate condition type.
While creating a sales order, when the routine is getting executed, i need the sales order item information. i.e. i need to access VABP table. but when i put a break point, in the routine, i cant see the detials of item.
can some one tell me how to get item data, in the routine.
(p.s. this is while creating sales order)
thanks a lot in advance
Best Regards
Amarender Reddy B

Hi
I suppose you're speaking about pricing condition, if it's so all information u can have are in structure KOMP and KOMK. The condition record data should be in the internal table XKOMV.
If there informations u need aren't there u should enanche those structure.
Max

How to get changed data in ALV in Web Dynpro for ABAP

METHOD on_data_check .
DATA:
    node_spfli                          TYPE REF TO if_wd_context_node,
    node_sflight                        TYPE REF TO if_wd_context_node,
    itab_sflight2                        TYPE if_display_view=>elements_sflight.
node_spfli = wd_context->get_child_node( name = if_display_view=>wdctx_spfli ).
node_sflight = node_spfli->get_child_node( name = if_display_view=>wdctx_sflight ).
CALL METHOD node_sflight->get_static_attributes_table
    IMPORTING
      table = itab_sflight2.
this code is ..get all data(changed and not changed)
but i want get changed data only, not all data.
how to get changed data?
Edited by: Ki-Joon Seo on Dec 27, 2007 6:04 AM

Hi,
To get only the changed data in the ALV grid of a WD, you need to capture the "ON_DATA_CHECK" of the ALV grid.
To this please do the following in the ALV initialization of the ALV table settings :
    lr_table_settings->set_data_check(
            IF_SALV_WD_C_TABLE_SETTINGS=>DATA_CHECK_ON_CELL_EVENT ).
You may also do this:
    lr_table_settings->set_data_check(            IF_SALV_WD_C_TABLE_SETTINGS=>DATA_CHECK_ON_CHECK_EVENT)
The above two ways would depend on when do you need to check for the changed data. If you want to check the data as soon as it is entered, then use the first method. Else, use the second method.
You need to register an EVENT HANDLER for this event.(You may do this in your VIEW or Component Controller).
In this Event handler, you would find an importing parameter R_PARAM which is a ref type of      IF_SALV_WD_TABLE_DATA_CHECK.
The attribute T_MODIFIED_CELLS of this interface IF_SALV_WD_TABLE_DATA_CHECK will contain the modified cells of the ALV with the old & new values.

How to get all data from nokia to i5s

how to get all data from nokia E71 to i5s???

if you can put those data in your computer then add it in iTunes. your iPhone 5s should get it thru syncing.

How to get the data from multiple nodes to one table

Hi All,
How to get the data from multiple nodes to one table.examples nodes are like A B C D E relation also maintained
Regards,
Indra

HI Indra,
From Node A, get the values of the attributes as
lo_NodeA->GET_STATIC_ATTRIBUTES( IMPORTING STATIC_ATTRIBUTES = ls_attributesA ).
Similarily get all the node values from B, C, D and E.
Finally append all your ls records to the table.
Hope you are clear.
BR,
RAM.

How to get the data from pcl2 cluster for TCRT table.

Hi frndz,
How to get the data from pcl2 cluster for tcrt table for us payroll.
Thanks in advance.
Harisumanth.Ch

PL take a look at the sample Program EXAMPLE_PNP_GET_PAYROLL in your system. There are numerous other ways to read payroll results.. Pl use the search forum option & you sure will get a lot of hits..
~Suresh

How to get the data from Pooled Table T157E.

Hi Experts,
How to get the data from Pooled Table T157E.
Any help.
Thanks in Advance,
Ur's Harsha.

create some internal table similar to T157E and pass all data as per SPRAS.
After that use internal table in your program as per the requirement.
Regds,
Anil

How to get purchasing data from SAP R/3 to OWB (Oracle warehouse builder).

Hi,
My name is Pavan Tata. I work as a SAP BW developer. Here is the situation at my client place. Client decided to retire BW system and wants to replace with OWB(Oracle warehouse). In all this currently we have purhchasing application in BW production system and wants to move this application to OWB for the same type of reporting what they are getting currently.
Here is my question:
How to get purchasing data from SAP R/3 to OWB(Warehouse) with initial full loads and deltas mechanism in the same way as we do in BW.
Please help on this, also send me any documentation about this if you have.
Thanks,
Pavan.

Hello,
here is a short report which converts S012 entries to strings with separator semicolon. Perhaps this will help you?
Regards
Walter Habich
REPORT habitest2 LINE-SIZE 255.
TYPES:
strtab_t TYPE TABLE OF string.
CONSTANTS:
separator VALUE ';'.
DATA:
it_s012 LIKE s012 OCCURS 0,
wa_s012 LIKE s012,
strtab TYPE strtab_t,
strele TYPE string.
SELECT * FROM s012 INTO TABLE it_s012 UP TO 100 ROWS.
PERFORM data_to_string
TABLES
    strtab
USING
    'S012'. "requires it_s012 and wa_s012
LOOP AT strtab INTO strele.
WRITE: / strele.
ENDLOOP.
*&      Form data_to_string
FORM data_to_string TABLES strtab TYPE strtab_t
                    USING ittab TYPE any.
DATA:
    h_zaehler TYPE i,
    line_str TYPE string,
    l_tabellenname(10) TYPE c,
    l_arbeitsbereichsname(10) TYPE c,
    h_string TYPE string,
    h_char(255) TYPE c.
FIELD-SYMBOLS: <l_tabelle> TYPE ANY TABLE,
                 <l_arbeits> TYPE ANY,
                 <feldzeiger> TYPE ANY.
CLEAR strtab.
CONCATENATE 'IT_' ittab INTO l_tabellenname.
ASSIGN (l_tabellenname) TO <l_tabelle>.
CONCATENATE 'WA_' ittab INTO l_arbeitsbereichsname.
ASSIGN (l_arbeitsbereichsname) TO <l_arbeits>.
LOOP AT <l_tabelle> INTO <l_arbeits>.
    CLEAR: h_zaehler, line_str.
    line_str = ittab.
    DO.
      ADD 1 TO h_zaehler.
      ASSIGN COMPONENT h_zaehler OF
        STRUCTURE <l_arbeits> TO <feldzeiger>.
      IF sy-subrc <> 0. EXIT. ENDIF.
      WRITE <feldzeiger> TO h_char LEFT-JUSTIFIED.          "#EC *
      h_string = h_char.
      CONCATENATE line_str separator h_string INTO line_str.
    ENDDO.
    APPEND line_str TO strtab.
ENDLOOP.
ENDFORM.                    "data_to_string

How to get the data from mysql database which is being accessed by a PHP application and process the data locally in adobe air application and finally commit the changes back in to mysql database through the PHP application.

How to get the data from mysql database which is being accessed by a PHP application and process the data locally in adobe air application and finally commit the changes back in to mysql database through the PHP application.

If the data is on a remote server (for example, PHP running on a web server, talking to a MySQL server) then you do this in an AIR application the same way you would do it with any Flex application (or ajax application, if you're building your AIR app in HTML/JS).
That's a broad answer, but in fact there are lots of ways to communicate between Flex and PHP. The most common and best in most cases is to use AMFPHP (http://amfphp.org/) or the new ZEND AMF support in the Zend Framework.
This page is a good starting point for learning about Flex and PHP communication:
http://www.adobe.com/devnet/flex/flex_php.html
Also, in Flash Builder 4 they've added a lot of remote-data-connection functionality, including a lot that's designed for PHP. Take a look at the Flash Builder 4 public beta for more on that: http://labs.adobe.com/technologies/flashbuilder4/

How to get the date of first day of a week for a given date

Hi gurus
can any one say me how to get the date of first day(date of Sunday) of a week for a given date in a BW transformations. For example for 02/23/2012 in source i need to get 02/19/2012(Sunday`s date) date in the result. I can get that start date of a week using BWSO_DATE_GET_FIRST_WEEKDAY function module. But this function module retrieves me the start date as weeks monday(02/20/2012) date. But i need sundays(02/19/2012) date as the start date. So it would be really great if anyone sends me the solution.
Thanks
Rav

Hi,
The simplest way would be to subtract 1 from the date date which you are already getting in transformation routine, but instead of doing that subtraction manually which might need bit of errort, you can simply use another FM to subtract 1 from given date.
RP_CALC_DATE_IN_INTERVAL
Regards,
Durgesh.

Discoverer 11g - How to get Sales Data in different periods?

Similar Messages

Maybe you are looking for