Discrepancy in Sales area data display of an Account in WEBUI and SAPGUI .
Hi Guru's ,
There is a custom program which deletes sales area data for an account .
This program basically deletes values from table crmm_but_lnk0010, crmm_but_lnk0011 , crmm_but_lnk0020 , crmm_but_lnk0021 , crmm_but_lnk0030 , crmm_but_lnk0031, crmm_but_lnk0140 , crmm_but_lnk0141 and crmm_but_frg0100 for the given account .
After running the program the maintained sales area value for the given account gets deleted from SAPGUI .
But strangely , the value still exists in some buffer and is getting displayed on WEBUI in sales area assignment block of an account .
I need this value to be deleted also from WEBUI . Can someone tell where the flaw can be and which method in webui framework needs to be coded for to remove the issue OR custom report program needs to be enhanced to delete value from some other tables . Thanks in advance !
regards
Piyush
Hi Kavindra ,
Actually the program was written by someone many days back . The program was written to directly update db tables as mentioned before .
Is that the reason for the inconsistency between GUI and Webui ? The buffered BOL layer is having values where as values are deleted from db tables so not appearing on GUI ?
If this is the case then report program needs to be updated with BOL programming statements deleeting sales area values from buffered entities and then saving and commiting bol . thanks in advance !
Regards
Piyush
Similar Messages
-
Preset Sales Area Data in a new account of a company - CRM WebClient UI 7.0
Hello,
how can I preset the Sales Area Data with Sales Org. ID, Distribution Channel and Division when I apply a new company (account).
Thanks for your help!
KristinHi Aaron Smith,
It will be great, if you guide us in how to delete the sales area of a business partner from Web UI.
I had tried SAP Note 1906379 and 725857 but i still can't delete sales area as such from business partner.
Your response is much appreciated!!!! -
CRM 5.0 Sales Area Data - Organization Tab
Hi All,
We have upgraded to CRM5.0 and as a result, under Sales Area Data a tab called 'Organization' has appeared and I cannot seem to remove it through field groupings even though all the fields available under field groupings are hidden.
Under field groupings there are 3 fields for configuration:
District
Sales Group
Sales Office
These are all hidden. Yes on the Sales Area Organiation tab two greyed out buttons appear:
Own Data (with create icon)
Own Data (with delete icon)
Also under sales area data there are other tabs such as 'Shipping' and 'Fact Sheet', all their fields are cojnfigured to be hidden and as a result their respective tabs (correctly) do not appear on the screen.
Does anyone knowe if it is possible to remove these and what is the correct way to remove this tab from the screen?
Many Thanks for any help/advice given.
DavidThank you, Gregor.
I'm still confused by the following portion of the release notes "<i>The person and organization are saved with the target group."</i>
It would be a problem for my company if organizations remained in the final target group.
Thanks again, Matt -
Prospective Account Sales Area Data on CRM Online
Hi Experts,
I am using CRM2007 SP4, and i am trying to assign Sales Area Data to a Prospective Account on CRM Online. However, unlike a reqular Sold-to account (CRM000) there does not seem to be a Sales Area Data Button where the Sales Area can be maintained for a Prospective account.
The BP Role for the Prospective account is BUP002.
It only seems possible to maintain this through the Web Client. Is there anyway which the Sales Area can be assigned to a Prospective Account through CRM Online.
Any assistance would be appreciated.
Thanks,
JonathanHi Sasha,
I've been checking it in our system (CRM 6.0). The field Price group (cust) from ECC (KNVV-KONDA) gets standard replicated to field Price Group (Cust) on the billing tab of customer data (BP).
No additional customizing or development is needed.
The field is stored in: CRMM_BUT_SET0030-PRICE_GROUP
regards,
Wim -
Sales area data view is not visible
Hi All,
the salea area data view is not visible for all BP roles in BP master data
please help me how can i need to put in a visiblehi
sales area data tab is not visible for each and every BP role,
it is visible for sold to party,ship to party roles,
there is aview associated with this role that is CRM 000
if you want to have sales area data tab visible in the role like BP general you have to assign this view to your role
but i should make you one thing very clear that sales area data tab is meant for the customer who has purchased the order and final order has been given and within this tab you have each and every info regarding the sales office,sales group etc that where the order is to be delieverd or purchased from,
once a final order is given it can be sold to party role,ship to party role or bill payable role ,u urself tell in the role of customer how can u see the sales info if the customer hasnt purchased the order ,
likewise the consumer role also has sales data info so sales area data tab is visible in this role too
hope it clears all your doubt,
in case of any doubt do revert back
best regards
ashish -
CRM BP type Sold-to-party Sales Area Data button not displayed
Hi Gurus,
Currently we are in the system preparation stage, but there's a problem in BP maintenance. For the BP type Sold to Party, the sales area data button is not showing up in the button bar with the General data. I only can see General data and Relationships here.
The sales area has been maintained in the system already and can be displayed in the reference bp. Not sure any config will affect.
Appreciate if anyone can give me a clue.
Rgs, MichelleHi,
If you have chosen the role, and the button is not coming up following could be the possibilities:
1. It might sound funny but it is a possibility that You might ALREADY be in the Sales Area data screens. Check if the "General Data" button is active. if it IS active then you ARE in the Sales area data.
2. If not 1, above, then check the authorisation for the id to create BP for Sold to party and / or Sales area.
3. Still No, then check if the screen config for creating BP is std or its a customised one wherein maybe the button has been rendered inactive. You can check by taking an existing BP who might already be a sold to part for a sales area. If this is your first case for a Sold to party then you might look at the screen config for sure.
Do write back if you still need help.
Regards,
Tariq -
Display sales area data in view mode?
Hello,
we use CRM 7.0 with the WebUI. In Account view we have the assignment block of sales area data. but in this assignment block we only have the possibility to open the sales area data in Edit mode.
Is there a way to open the sales area data in view mode and if how does it work?Hi Fabian,
If you see this block as delivered by SAP, its in display mode with possibility of edit( button to edit ). If you want to take out this button/disable this button then you will have to redefine GET_OCA_T_TABLE from IMPL class of respective view ( BPSALES/CorpAccountSalesAreasOV) also you will have to remove buttons for adding new entry by redefining DO_PREPARE_OUTPUT.
Regards,
BJ -
Business Partner creation - Sales Area Data retrieves blank divisions
During business partner creation, the sales area data assignment block will retrieve a list of all relevant sales organizations, distribution channels, and divisions that are replicated from ECC. This is working fine. However, it also adds to this list with the sales organizations, distribution channels, and blank divisions. Blank divisions do not exist in either ECC or CRM. It appears to be using the dummy division settings, but I have attempted to configure with the indicator "CRM Header Div. Active" as both active and inactive, to no effect. The only time I have been able to condense this list into a single line has been when I actually activated dummy divisions -- to which CRM would now retrieve only sales organizations, distribution channels, and blank divisions. This is not an ideal solution either.
How do I get the system to remove the blank divisions from being displayed? It is very confusing to the users, not to mention polluting the screen.
Example (both are being displayed, I only want the one with an actual value to be displayed):
Sales Org = 1000, Dist Chan = 10, Division = blank
Sales Org = 1000, Dist Chan = 10, Division = 10any insight woudl be much appreciated. thanks.
-
Trying to add sales area data to sold to party in CRM using
Hi all,
i am trying to add sales area data to a sold to party business partner and i used the BAPI BAPI_BUPA_FRG0010_ADD. it executes i dont get runtime error but i get the error "invalid sales and distribution area" in return table.
also i see that the sales area data of the sold to party is not updated after i execute my program
can anyone tell me what i am missing
Edited by: jessica sam on Nov 13, 2008 8:17 PMhey Rob i dont know if the configuration is done.but if i try to create a sold to party business partner in the screen in CRM i sales area data tab----->sales area, i find the drop down list with the values for sales organization, ditribution channel and division.
i am able to create a sold to party in CRM and it is replicating in ECC. but if i try to display the sales area data of a sold to party that i created using the function module BAPI_BUPA_FRG0010_GETDETAIL
it throws me an error saying invalid sales area data.
Also i find that data is there in CRMM_BUT_LNK0021, CRMM_BUT_LNK0031 tables but not even one entry in CRMM_BUT_LNK0011
Also i find that data is there in CRMM_BUT_SET0020, CRMM_BUT_SET0030 tables but not even one entry in CRMM_BUT_SET0010
is some thing missing in functional configuration. the CRM guy did an intial upload from R3 and brought the sales organization to CRM. -
Customer Master Screen Enhancement XD02 / XD03 / XD01 in sales area data
Hi,
My requirement is to add custom fields for customer master enhancement XD01/ XD02 / XD03 in sales area data.
There are 5 tabs in sales area data. I want to add fields in sales tab after subscreen Agency business.
subscreen similar to Agency Business should be added.
I tried to create Screen group in SPRO and implemented BADI as explained in link below, even then my custom program is not displayed in customer master
http://wiki.sdn.sap.com/wiki/pages/viewpage.action?pageId=77005819
Please help.Hi,
Please don't mind but I want to know have you activated the implementation?
regards,
Sarbajit -
Credit management....sales area data
hi gurus,,
I have some doubts in Credit Management>
1. In my development Server....Customer Master data > Sales Area Data > Billing Tab Page>CREDIT CONTROL AREA...is not reflecting.
using version 4.7... why is was not reflecting... any configaration settings is required??.
Anybody having configuration material of CREDIT MANAGEMENT and FREE GOODS DETERMINATION..
MAIL ID::: [email protected]Hi ravi,
Notes on Credit mangement
SAP SD Credit Management
All business have their own credit management needs, SAP allows you to specify your own automatic credit checks based on a variety of criteria. You can also specify at which critical points in the sales and distribution cycle the system carries out these checks.
SM30 - Table/View
V_TVTW - Define Distribution Channel
V_TVTA_KKB - Assign sales area to credit control area
V_T014 - FI - Define Credit Control Area
T001CM - FI - Assign Permitted Credit Control Area to company code
OVXG - Set up Sales Areas
e.g. Sales Organization
Distribution Channel
Division
Distribution Channel
Division
FD32 - Customer Credit Management
OVAK - Define credit limit check by sales document type
Check Credit
A - Credit limit check and warning message
B - Credit limit check and error message (no sales order can be created)
C - Credit limit check and delivery block (block delivery if hit credit limit)
Options B and C -> used for checking open order values (when you create/change the sales order)
D - Automatic credit control with open order values
More control in transaction OVA8 - Automatic credit control
You check for open orders and deliveries, or just open deliveries.
or open order values with other options
Credit group
Allows you to combine different sales document types for the credit limit check
VKM1 - Blocked SD Documents - Finance have to released the delivery block
OVAD - Define credit limit check by delivery order
whether the automatic credit check occurs at the time of delivery creation and/or goods issue
OVA7 - Define credit limit check by item category
Set whether to include/exclude item category for credit limit check
OVA6 - Define credit group. You can groups together different business transactions which should be dealt with in the same manner with regard to the credit check.
You enter the credit groups when you configure the sales document types for credit management and define the (D - automatic credit check).
SAP default credit groups
01 - credit group for sales order
02 - credit group for delivery
03 - credit group for goods issue
OVA8 - Automatic credit control - Double click on the line items
You can have the followings credit limit check :-
Static
Depends on the customer total value of open orders, deliveries, billing documents and open items.
Open items
No of days open
Overdue open items checks is based on the ratio of open items that are overdue by a certain number of days.
Max open items %
The customer balance must not exceed a certain percentage.
Oldest open items
If you don't want to deliver to the customer at all when even only 1 invoice is overdue.
Tick the Check for Oldest Open Item and Set the field Days oldest item = 1.
Days oldest item
No of days allowed for overdue or payment terms.
Use of the credit check Oldest Open Item. If a user attempts to alter the order quantity of a released sales document
that was previously blocked, it would be reblocked again by the system. The system only reblocks the sales document if the new order quantity is above a certain % amount.
Released documents are still unchecked
The preset % is whatever you want to set it as when configuring your automatic credit processing. You enter a deviation % and number of days,eg, you can set it so that an order can be changed by up to 10% within 30 days of original order entry date without it going back on credit block.
Next Review Date
If a customer has a credit limit of 1000 USD, and you would like to restrict this credit limit only to be available in current month (say March). If the document day is in April then the credit limit is zero.
You can use the "NextReview date" and "Number of days" fields and combined it with the "Last int.review" field in customer credit master "Status" view (FD32).
VOKR - Display of work list for credit management (configure the display variant)
Free goods determination
Free Goods Determination in Sales Order
Free goods has the following limitations:
- Free goods can only be supported on a 1:1 ratio. This means that an order item can lead to a free goods item. Agreements in the following form are not supported: With material 1, material 2 and material 3 are free of charge or If material 1 and material 2 are ordered at the same time, then material 3 is free of charge.
- Free goods are not supported in combinations with material structures (for example, product selection, BOM, variants with BOM explosion).
- Free goods are only supported for sales orders with document category C (for example, not quotations).
- Free goods are not supported for deliveries without reference to a sales order.
- Free goods cannot be used in make-to-order production, third-party order processing and scheduling agreements.
- If you defined a free goods for variants in a generic article (only SAP Retail), you can only process the variants in the purchase order and goods receipt individually (as single articles). In other words, you cannot process them using the generic article matrix.
4.6x
Not all Sales Order can be used for free goods determination. You have to check the SD document category if it does not work. Only category 'C' are supported. Check transaction VOV8.
Assume that you want to configure an inclusive FREE goods routine. Customers must order a minumum quantity of 5 before any free goods can be assign. For every quantity of 3, the customer will be given 1 free goods.
WC07 - Maintain Number Range Intervals
e.g.
No From number To number
01 0000010000 0000099999
IMG -> Sales and Distribution -> Basic Functions -> Free Goods ->
Maintain Access Sequences
New Entries
Acsq
NA00
Save
Maintain Condition Types
New Entries
Ctyp Name AcSq
FREE Free Goods NA00
Save
Maintain Pricing Procedures
Procedures
New Entries
Procedure Description
FREE Free Goods
Select Procedure FREE then click Control data
Step Cntr Ctyp
10 10 FREE
V/N6 - Activate Free Goods Determination
Assign Order Type OR with Document Procedure A with Procedure FREE
VBN1 - Create free goods determination
e.g. FREE inclusive
Material Min qty From are free good Calc Rule Free Goods
5 3 1 1 1
In this example, if you create a Sales Order for a quantity of 10, SAP will prompt you 7 as the customer order qty and 3 will be free. Customer only pay for the 7 quantity.
Reward points if it helpful -
Hi All,
I have a requirement that when i click on the kunnr field in alv report it should go to
transaction XD02 and should be on screen Customer sales area data..
if i use call transaction 'XD02' and skip first screen it goes to 'Company code screen'
and hot the sales area data screen
so can anybody pls tell me how to achiece this means can we use BDc if yes pls provide the cdoe
i used bdc but when i record it goes screen by screen and finaly reaches sales area data.
if i use display all screen if i use 'N' mode it do not got to sales area screen
but the user want to directly navigate to sales area data screen when he cick kunnr field.
thanksHi pankesh,
while recordin in SHDB when the screen moves to sales data screen record the screen by inputting some error data and while calling the transaction through CALL TRANSACTION use processing mode as 'E' so that the the BDC will get stuck in the sales screen and the user can rectify the data and then continue.
Regards,
Anil N. -
Business Partner - CRM Sales Area Data disabled
Hi Experts,
Facing a small problem in Business Partner screen.
I have created a Sold-to-Party role and when i go to the <b>Sales Area Data</b>
data set, i should be able to Choose Sales Area for determining the Sales Org and Distribution Channel. But the Button <b>Choose Sales Area</b>
is not enabled. Kindly help me out in Enabling this button so that i can choose Sales Area and determine the Sales Org and Distribution Channel.
Thanks
ShivaHi,
1. Go to transaction sm30
2. Open T77OMATTR in display mode.
3. Select SALE and go to Attributes/Scenarios.
4. Now go to the detail of attributes IS_SA_GRP, IS_SA_OFF and
IS_SA_ORG.
There you will see that Flag is not checked for 'Simulated'. For
Enhanced model it should be checked. Check the checkbox for all the
three attributes and then run the report
HRBCI_ATTRIBUTES_BUFFER_UPDATE.
Smita. -
Deletion of assigned sales area data
Hi *,
I am looking for a possibility to delete sales area data that were wrongly assigned to business partners. In our case the BPs were not uploaded to ECC yet.
Any ideas?
Kind regards
ThomasHi Thomas,
There's no easy way to do it. You have to adapt report from note 725857 to allow deletion of sales area for specific BP. You can get also more information on notes 1955713, 1906379.
Kind regards,
Bruno -
User Exit for XD02 in Sales area data in Sales tab
Hi Sap Gurus,
I have a problem . I need help .
The requirement is
In XD01 transaction , In Sales area data, In Sales tab i need to add a Check box which i already have added.This check box refers to KNVV table-Zflag
In VA01 transaction , In menu goto -> header -> Sales , In Additional data B .
I have another Check box. This check box refers to Vbaktable-Zflag .
<b>I need the code and exact locations where to put this to get my issue resolved which is given below in Functional Description</b>.
Functional Description where you can understand better.
Our custom logic will be initiated once the Sold-to Party (VBAK-KUNNR) is entered for any order type. When the sold-to party is entered the user exit program will check table KNVV for the custom field ZFLAG that corresponds to the Print Prices on Delivery Note flag (hereafter referred to as the Pricing Flag) and populate the same setting of the flag into the ZFLAG that will be on the Additional data B tab on a sales order at the header. The user can manually change VBAK-ZFLAG Pricing Flag setting to something different than what is populated for the customer master level.
If the user happens to change the sold-to party for any reason then the user exit program should take the following approach when populating the ZFLAG Pricing Flag in a sales order:
- Recheck the ZFLAG Pricing Flag setting in the customer master for the sold-to party that the user has newly selected.
The user will still have the option to manually ZFLAG Pricing Flag on a sales order after the user exit program defaults it.Transaction Code - XD02 Change Customer (Centrally)
Exit Name Description
SAPMF02D User exits: Customer master data
No of Exits: 1
USER EXIT
http://www.sap-img.com/abap/a-short-tutorial-on-user-exits.htm
http://www.sapgenie.com/abap/code/abap26.htm
http://www.sap-img.com/abap/what-is-user-exits.htm
http://wiki.ittoolbox.com/index.php/HOWTO:Implement_a_screen_exit_to_a_standard_SAP_transaction
http://www.easymarketplace.de/userexit.php
http://www.sap-img.com/abap/a-short-tutorial-on-user-exits.htm
http://www.sappoint.com/abap/userexit.pdfUser-Exit
http://www.sap-img.com/ab038.htm
http://help.sap.com/saphelp_46c/helpdata/en/64/72369adc56d11195100060b03c6b76/frameset.htm
http://www.sap-img.com/abap/a-short-tutorial-on-user-exits.htm
http://www.sap-img.com/abap/what-is-user-exits.htm
http://expertanswercenter.techtarget.com/eac/knowledgebaseAnswer/0,295199,sid63_gci982756,00.html
Rewards if useful.........
Minal
Maybe you are looking for
-
Unable to deploy a simple ADF Mobile app to iPhone
I have been able to deploy the app on iOS simulator, and also on an Android device. I have also created provisioning profile and certificate from apple developer site. My XCode is also setup properly and can deploy the app on iPhone. However when i t
-
Set default Button and provide a KeyEvent to a component with focus !!!
What is to do ??? I have following program: public class DefaultButton extends Frame implements ActionListener private Button close; public DefaultButton() super("Default-Button"); setLayout(null); setSize(400,
-
Password, is there some way to retrieve my System Preferences password?
Is there some way to retrieve my password ysed to login and install? I have lost my sytem password...
-
Discoverer URL - Hide password without having to use public connection
Hi, I would like to call Discoverer Viewer without having to expose the schema password and without having to use public connections. Is this possible? Disco Viewer is called directly from my application, with custom authorization and authentication.
-
"iTunes cannot be found or created" all of a sudden
Please help- I recently installed OSX Leopard without any problems. That was until iTunes started playing up- it says "the folder itunes cannot be found or created, and is required...." The itunes folder is in the correct place in the "music" folder-