Disk Setup for CS4

Hello All,
Looking for some recommendations on disk setup for CS4. Some quick specs. XP Pro 64 bit,Intel i7 extreme, 12GB DDR3 RAM, and 8 Velociraptor 300 GB Drives.
I orginally had it setup as a single Array (RAID 5 with online spare) with two partitions ( One for OS and program files, and one for storage and Scratch and Page file)on the array. I wasnt getting very good performance so I decided to wipe and reconfigure.
Would I be better off with 2 arrays? One array of 2 drives RAID 0(600 GB) for OS, Program Files, and Scratch Space. and the second array of 6 drives at RAID 5 (1.3 TB) for storage?
Or maybe even go with a single drive for OS and Program Files (300 GB). A single drive for Scratch Space (300 GB). and then the 6 Drives in RAID 5 for storage?
Also where would be the best loacation for the paging file?
Thanks in advance for the help

The speed of a 7-disk raid5 is far higher than a single disk. The speed degradation from a 7-disk to 6-disk raid may not outbalance the addition of a single disk for scratch.
I am seriously considering to move 2 single disks to my raid array, so I end up with 2 x 7 disks in a Raid30.

Similar Messages

Best disk setup for Premiere CS6

Hello,
I want to improve my disk setup for Adobe Premiere CS6 because I got long loading times.
My current setup:
Crucial RealSSD C300 60GB SSD for the program
Samsung Spinpoint F3 1TB HDD for media and Media Cache Files
Samsung Spinpoint F3 1TB HDD for projects and exports
My planed setup:
new: Kingston SSDNow V300 120GB SSD for the program
Crucial RealSSD C300 60GB SSD for Media Cache Files
2x Samsung Spinpoint F3 1TB HDD with Raid 1 for media
new: Seagate Barracuda 2 TB HDD for projects and exports
Is this the best solution to improve the performance?
Thanks
Tim

What is the advantage of getting an extra HDD for the exports?
None from a performance point of view.
And should I use the 60GB SDD for the Media Cache Files?
That is much too small. Depending on your projects, you will need at least 256 GB, but possibly even more.
With only 350 GB of media and projects, my media cache is already 72 GB.
Read Harm's articles on disk setup, raids and balanced systems here: Tweakers Page

Ideal disk setup for MDFs, LDFs, TempDB, and cube files?

I'm about to build an enterprise SQL Server that will run both OLTP and our data warehouse (OLAP). What is the proper disk setup for data files, please? Is it something like:
1 for MDFs
1 for LDFs
1 for TempDB
1 for OLAP files
Or something close to that?
Thanks for any guidance.

Please take a look at these URLs:
How to configure the hard disks for optimal performance?
Disk Partition Alignment Best Practices for SQL Server
SQL Server Storage Best Practices
T-SQL Articles
T-SQL e-book by TechNet Wiki Community
T-SQL blog

PC build and Disk Setup for a Pro-Wannabe

Hi All,
I know everyone asks these questions and I thought I will not but, when you spend more than $3000 it feels their is no "Harm" in asking the question (but hopefully their will be Harm somewhere in the comments).
So, after waiting for the Mac Pro update for 2 years (just to fool myself that I may buy it), I have decided to move from the Mac OS to Windows after 4 years. I was only using a Macbook Pro to edit and feel now have the suitable experience to begin working on an actual machine.
If you ask my budget, I didn't have any so I went on a buying frenzy with my credit cards and will hopfully be driven to work harder to pay it off .
Here are the parts I have bought:
CPU - Intel 3930K (duh! I don't see a point in waiting for the 4th Gen)
Mobo - ASUS P9X79 Pro
RAM - GSkillz 32GB (8GBx4) @ 1600MHz 9-9-9 (as 3930K is limited to 1600MHz and 1.5V)
Will buy this same set around end of this year to make it 64GB if I feel AE would eat it.
Cabinet - CoolerMaster Storm Stryker (was buying HAF-XM but could not resist the looks of this).
PSU - Seasonic 860W Platinum Plus (Thought 1k is overkill and 750 not future proof, pricey though)
Storage (I thought I will get 1 cheap SSD and 1 Hybrid but then I read all the threads and went crazy)
Samsung 840 Pro SSD- 256GB - 2 nos.
Samsung 840 (nonPro) - 128GB - 2 nos.
Seagate 7200rpm HD - 2TB - 3 nos.
Monitor (just fyi) - Dell U2412 (planning to buy ASUS PA '13 or Dell Ultra '13 24" after few months)
.. finally GPU - Not bought yet
I ordered the ASUS GTX 680 4G as 780 was too costly
but then I read the actual successor to 680 is 770. So I cancelled my 680 but the seller still has not confirmed, just hoping they cancel. Then it turns out 770-4G is not yet sold in my country (am not from the US) so I may import from US (surprisingly importing from Amazon with duties costs the same as probable street price in my country). So I will mot probably buy a..
Gigabyte GTX 770 4G
So, Question 1> Any comments on the component list?
As I plan to build this on my own, have not thought of overclocking as I am not a geek and feel I should first get comfortable. Fair thought?
And hence I have not bought any additional Fans or Coolers.
And now for the Question 2> disk setup! Can you please fill the blanks or suggest alternatives.
This is what I have planned:
C: > Samsung 840 Pro 256GB : OS and _____ ??
D: > Samsung 840 Pro 256GB: Previews and Renders and/or ____ ??
E: > Samsung 840 128GB x 2 RAID-0 : Footage and ___ ?? (the 128GB version has slowest write speed so assigned it to footage)
F: > Seagate 2TB x 2 RAID-0 HDD : Exports and General Personal Files (like Docs, Music)
G: > Seagate 2TB : Dedicated solely as Backup Drive for crictical data at any time (which for me can be on any drive, that is why no RAID3/5 I feel)
And I plan to use my old external USB2/Firewire/USB3 external drives (500GB/1TB) for manual backups.
I can buy 1 or 2 more 2TBs (not SSDs) if it is really critical for some configuration but not anything more.
Usage: I shoot only DSLR footage and use PPro and AE CS6. I have till now been using a 2009 17" Macbook Pro with an SSD. And could have been spotted sometimes using a Class 6 SD Card on a USB 2 card reader being used as the Media drive (Ouch!). I feel (a) now I have the skill to justify this as many times I end up not implementing an idea in AE as my machine just won't budge and (b) I plan to buy the BlackMagic Pocket Camera to learn capabilities of RAW media. Like many I do hope to make an indie in the next 2 or 3 years but I hope I can employ services of a professional who should at least give me respect when he looks at my machine
If you have made it till here, thanks for your time. Waiting for your comments.
Cheers!
Ps: And yes I am planning to subscribe to CC as its cheap for a CS6 owner. And then after 1 year will judge if I will continue with CC once upgrade pricing goes (hopefully yes as I wait for an extensively GPU using AE version soon).

Regarding question #1, build list, and question #2 drive setup:
everything looks great except...
add a good cpu cooler; lots of good choices out there including but not limited to: budget: Cooler Master 212 EVO, high-performance air: Noctua NH-D14, simple liquid: Corsair H110, full water cooling: many options (full water cooling is a pain to plan and build, but ooooohhh so quiet!)
RAM: suggest go for 64GB at the onset rather than trying to add RAM later
definitely plan on overclocking - 4 Ghz is a walk in the park and very safe since you aren't totally comfortable with overclocking, and the performance gain is rather significant for renders, etc.
One SSD is plenty to get started - 256GB would be good for OS, programs, as well as providing some room for AE and photoshop caching
2 drives in RAID 0 would work pretty well for all projects, media, etc. If you really want to spend more in the drive area up the RAID to a 3 or 4 drive RAID
Suggest putting your backup drive in a hot-swap tray so you can remove it and provide off-site backup capability
Regards,
Jim

Need advice on Hardware & Disk Setup for Premiere Pro CS6

I am about to purchase a Mac Pro and after reading threads on hardware requirements & different disk setups I am still a little unsure which way to go. If someone could point me in the right direction would be greatly appreciated.
Firstly this system will be used primarily for the following tasks: Editing AVCHD media (Sony HDR-XR550) and burning to disk with light editing, Creating Web Videos from AVCHD Media, editing images in Ps & Lr. This is strictly a hobby for me and I will also use the machice for some light AutoCad work.
The current system specs are as follows:
3.33GHz 6-Core Intel Xeon processor, 16GB (4x4GB) RAM, Bay 1: 1TB 7200-rpm Serial ATA 3Gb/s, Bay 2: 512GB SSD, Bay 3: 1TB 7200-rpm Serial ATA 3Gb/s, Bay 4: 1TB 7200-rpm Serial ATA 3Gb/s, ATI Radeon HD 5870 1GB, Two 18x SuperDrives.
My questions are:
1.     Reading the thread on Generic Guidelines for Disk Setup I plan to use the 4 Disk setup described. If I only have 1 SSD, should I make it C: D: E: or F:? My priority would be the editing speed rather than the exporting speed.
2.     If I can stretch my budget to include another SSD then again, should I make it C: D: E: or F:?
Thanks in advance for any advice.

Hi Harm (& Jim),
After much deliberation I agree with you and Jim. I am not sure what I was thinking!
I have decided to build my own machine based around your reccomendations in previous posts. Could you please look over the system specifications and offer any suggestions or comments?
Chassis
Lian Li PC-A77
$ 375.00
PSU
Corsair CMPSU-850AX Professional Series Gold AX850 PSU
$ 210.00
Motherboard
Asus P9x79 WS Motherboard
$ 469.00
CPU
Intel Core i7 3930K 3.2GHz CPU
$ 615.00
CPU cooler
Cooler Master Hyper 212 EVO Universal CPU Cooler
$ 40.00
RAM
G.Skill Ripjaws X F3-12800CL10Q-32GBXL 32GB (4x8GB) DDR3
$ 285.00
GPU
Gigabyte GV-N66TOC-2GD NVIDIA GeForce GTX 660 Ti 2048M
$ 319.00
Disk
SAMSUNG MMSASSD840P128 SAMSUNG 840 PRO SERIES 128GB SSD
$ 135.00
Disk
(3 of) Western Digital WD VelociRaptor 1TB 10,000RPM SATA 6.0Gb/s Hard Drives
Owned
Disk
(2 of) Western Digital WD Black WD2002FAEX 3.5" 2TB SATA 6.0Gb/s Hard Drives
$ 320.00
Burner
LG BH16NS40.AYBU10B LGE OEM BH16NS40 BLK BluRay Burner, 14xBD-R Read/ Write, 16xDVD+-R Read/ Write, SATA, Silt Play, M-Disc Support [BH16NS40.AYBU10B]
$ 88.00
TOTAL BUILD COST in Australian Dollars
$ 2856.00
I have a few questions if you would be kind enough to help.
Is the RAM specified compatible with the rest of my system?
Do you think the GPU is over spec? Could you recommend an alternative if so?
What would be the optimal disk configuration with the proposed disks? I would consider another WD Black if it would make a significant difference.
Do you have any other suggestions where this system could be improved whilst keeping the budget around the same value?
Many thanks,
Rich

Hard Disk Setup for Video Editing

Dear Forum.
My name is Tom Woods and I was hoping that you may be able to advise me or point me in the right direction, in regards to the question below....
: ) Im not sure if you are in this area or not, my apologies to you if this is the case.. Here goes..
I'm thinking of getting Adobe Production Premium installed where ill be using Photoshop, After Effects, and Premier Pro, and need some advice on my current Disk Setup to maximize performance to work with editing HD 1080i video.
My question is;
"Which of my internal 'Disks', do I assign the following processes to, these processes are;
Photoshop: SCRATCH DISK
After Effects: DISK CACHE
Premier Pro: SCRATCH DISK Captured Video / SCRATCH DISK Captured Audio / SCRATCH DISK Video Previews / SCRATCH DISK Audio Previews
Premier Pro: MEDIA CACHE FILES / DATABASE
And finally the recorded Video 'parts' ready for editing, and the 'previews', and then the 'saved project file'.
My current Disk setup is:
C: SSD - 90GB (quite full)
D: SSD - still considering size to purchase
E: SSD - still considering size to purchase
F: HDD - 500 GB (currently used for all Video Parts and all work)
*Also, for drives D & E, what 'SIZE' in GB would they need to be for assigning the Scratch, Cache and other files mentioned above? (when i purchase them)*
If you can help me out with this it would be totally amazing, im really stuck and finding internet advice very unclear..
I appreciate you will be busy but I thought I would try here first for some help! Thank you so much for reading this so far...
My Best regards to you
Timmy

Tom,
Let's start with the terminology. Once you understand that, things will become a lot easier.
MEDIA: Name for all the raw material you shot, whether video or pictures or audio recordings. It does not matter whether this was captured from tape based video cameras, or imported from card or disk based cameras.
MEDIA CACHE: When Media are imported into a project, PR automatically creates three kind of files that are stored in the location you set up in the Preferences. They are .IMS files or indexed files, .CFA or conformed audio files and last .PEK files, that display the audio waveform in the timeline.
MEDIA CACHE DATABASE: Also automatically created by PR and contains pointers to the files in the Media Cache.
Note that occasionally the Media Cache and Media Cache Database can become corrupted and in that case it is a good idea to Clean the Media Cache from Preferences. When opening a project indexing, conforming and generation of PEK files is automatically done. Just be a bit patient for that process to finish.
PREVIEWS: Also called RENDER files. When you render a timeline to turn the red bar into a green bar for preview purposes, PR stores .XMP files in the PRV directory location you have set in the Project Settings.
Media files are typically very large and require a good sustained sequential read speed. Once ingested (imported or captured) they remain unchanged, because PR is a non-destructive editor. On the one hand this makes a SSD an ideal type of disk, because it is only reading the media files and not writing, but the size may be the limiting factor.
Media cache files are typically small and many, so here sustained R/W transfer rates are important, making it less than ideal to put them on a SSD, because the major drawback of SSD's is their limited and finite number of writes.
Now Tom, to your specific situation:
C: SSD for OS & programs.
D: HDD for media and projects (because of the size of the media and frequent changes in projects).
E: SSD for static page-file and exports.
F: SSD for media cache and previews, although a HDD may give you better life expectancy but also slower performance.
Maybe this article can be helpful as well, because it shows the impact of codecs on your system: Adobe Forums: What PC to build? An update...
You may have to get additional HDD's for raid configuations, if you edit 4K material or 422 material, because it is all about transfer rates.
To give you a rough indications of what you can expect from your drives, I suggest you get HD Tune Pro to test for yourself, but here are some indicative figures:
SSD: R around 450 MB/s, W around 300 MB/s, depending on the brand/model in steady state with SATA 6G. SATA 3G is far slower. Sandforce controllers may top out around 250 MB/s W.
HDD: R around 150 MB/s, W around 140 MB/s

Disk setup for Laptop on Premiere Pro CS6

So, I have read the guidlines on disk setup but I feel that it is geared towards a desktop setup. I would like to know how do I setup a laptop that has the three (3) HDD bays. I only have two drives on it and I am looking forward to buy a new one depending on how you guys reccomend it is set up. My OS disk is 128gb Crucial M4 and the second drive is a 7200 750GB seagate momentus xt. Which will eventually become:
OS - 128gb SSD
Source - 750gb drive
Render - ?????
External - cache/export/storage
Should I go for another 7200 drive of the same kind or should I remove it and go for SSD for both source and render? Thank you very much for any help.

Good, that is a strong laptop spec.
I'd vote to go with a second matching Momentus in bay 3 for sure.
Suggest you buy it, configure it, and test it out to see if you have the drive speed with your workflow to max out your cores (monitor w/ task mgr) with just the two internal drives and nothing external. I don't have much personal experience with your particular codec (sounds like Canon DSLR?), but I suspect that you will be CPU bound more than disk I/O with this setup.
Your eSATA extrernal drive or array may only be needed for backups. If it does turn out you are want or need even more drive performance, configure the two 7200 rpm drives as a RAID 0 in the laptop and bundle with something (single 7200 or G-RAID mini) coupled externally.
Jim

4 disk setup for PPRO cs6 please

hello,
can any users throw out advice as to where to put scratch disk, media cache/files, previews, final renders for PPRO cs6
using 4 sataII 7200 drives please...
c: 1) os win7 // cs6 programs
d: 2) final renders //
e: 3) media cache // previews // encore ISO //
f: 4) footage/ PPRO_projects // encore projects
(the encore projects and iso are where they are at because writing the iso E: needs the final render D: (2 separate hdd) (and no longer needs the 'footage' on F:)
working with avchd 1920x1080 canon hfs20 footage
http://help.adobe.com/en_US/premierepro/cs/using/WS9FAF538A-BEE3-4925-B45A-DF8BE7F2A2E5.ht ml
Premiere Pro saves conformed audio in CFA audio preview files. You can determine where to save these audio preview files by specifying a Scratch Disk location for Audio Previews in the Project Settings dialog box.
yet, i find the cfa files in the media cache files folder...
thanks in advance, j

Here's what I'd do.
C: OS/Programs
D: Projects/Cache/Scratch
E: Media
F: Exports/Images

What's the Best Photoshop CS5 Scratch Disk Setup for New MacPro 12 Core?

Hello all...
I'm awaiting delivery of a new MacPro 12 Core with 16GB of RAM and a 512GB SSD drive (Bay1) + 2TB (Bay2) + 2TB (Bay3). Normally I would partition about 60GB of one of the 2TB drives to make an exclusive scratch disk for Photoshop to ensure optimum performance.... with the new spec MacPro and especially the new 512GB SSD, do I still need to do this..?
Any suggestions of comments most welcome... as I want to try to get my new machine set up as best I can before I start copying over my existing data and filling hard drives etc. Photoshop CS5 and Quark Express 8 are my two core apps that I use daily.
Regards,
Anthony MacCarthy
Irish MacUser and MacAddict

ScarCrow 28 wrote:
…Well yes, technically you've got me on that I will admit. I'll try to rephrase to be a bit more accurate. The best scratch disk is one you don't need to rely on performance wise, by having enough RAM to handle the data performance needy tasks that would otherwise be sent to the scratch disk, when enough RAM can't be accessed by Photoshop…
…Hows that?
Still wrong, alas.
The scratch disk is used always.
See this very short (two-message) thread:
http://forums.adobe.com/message/2847996#2847996
Excerpt:
[Chris Cox writes:]
…Photoshop needs to allocate scratch space for data, in case it needs to
write that data to disk later -- otherwise you would randomly fail with
"out of scratch space" in the MIDDLE of an operation…
Furthermore, Photoshop sets the size of the scratch disk ahead of time—the instant you open an image file or create a new document—basing it on assumptions the application makes taking into account your usual, past workflow practices, your settings and the pixel dimensions of the document.
Bottom line: the scratch disk always plays a part.
Do a forum search filtering the options with Chris Cox in the "Who" box, "scratch" as key word, and Photoshop Macintosh as the forum. You'll find some enlightening reading. Examples:
http://forums.adobe.com/search.jspa?q=scratch&resultTypes=MESSAGE&resultTypes=COMMUNITY&pe opleEnabled=true&dateRange=all&communityID=3341&username=Chris+Cox&numResults=15&rankBy=10 001
I'm not just insisting on arguing; I honestly want you and others to have a better Photoshop experience. Really.
Wo Tai Lao Le
我太老了

Optimal multiple disk setup for AE

I have an 8-core Mac Pro 4,1 with 24GB RAM, a Radeon 5770, an SSD (about 75MBs/125MBs), a couple of WD Caviar Blacks and some regular old 7500rpm drives. I've decided to try and extend it's life a little rather than buying a new Mac Pro. Leaving more RAM and GPU upgrades aside, I'm not quite sure where to spend my money in order to maximise performance. For example, I currently use the SSD for OS, Apps and Home folder. But if AE is loaded into RAM when I run it, surely teh SSD would be more useful for my media? I don't really care how fast the OS or Apps load because I tend to do that over coffee and then spend all day in After Effects!
…I use AE a lot. Plus a bit of C4D, PS and very rarely PP.
There is a chart here with suggestions for optimal disk allocation, but unfortunately it's aimed at PP, and doesn't mention disk or bus speed at all.
I am thinking of buying a Sonnet Tempo Pro and SSD's so that I can add very fast storage over PCIe. The Tempo Pro can mount 2 SSD's as 2 volumes or as a RAID for even more speed. I don't know which would be best - having media on a superfast RAID drive and the OS on a slower SATA one, or having one SSD for OS and one for Media.
And then there is the AE Disk Cache. Then there is the 'Conformed Media'.
I think I can figure out redundancy and backup options - I'm just keen to understand performance.

Hm - this Adobe white paper states
"Multiple drives may be used to deliver higher performance. A simple technique is to install multiple
single drives in a desktop workstation computer, and dedicate each to specific tasks: for example,
one for the operating system, one for your files (with potentially separate drives for your sources
and output, especially for Adobe Premiere Pro), and one for your temporary storage caches"
I am attempting to optimise performance here, not merely avoid problems. If I were to go ahead and get the Sonnet Tempo, Todd, are you saying there would be no noticeable performance gain by then using other (albeit slightly slower) drives for the OS? Or, to put it another way, if one's drives vary in IO speed, there is no point in using ANY of them other than the fastest one for Apps, OS and all AE Caches?

What's the optimum Scratch disk setup for a Macbook Pro?

Hello Everyone,
I'm starting to edit video on my Macbook Pro. I'm going to need a scratch disk. Should I get a dedicated 3.5" scratch disk or should I spend the same money on a new HD for my Macbook pro and just use the stock 200gb drive as the scratch disk? It's a mutiuse system... If you were in my shoes, would you put the newer, faster HD inside my computer or use it as a scratch disk?

Just to jump in on this, and add to the orignal post. I have a Macbook (not pro) and I need to get a external HD. I'll obviously go for Firewire, the only problem I can forsee is importing footage from my DV camera, which is also Firewire. My Macbook only has a single Firewire port. I know most externals have a Firewire Hub built in, enabling you to connect through there, but is that sufficient, will the transfer rates be ok for DV capture, as it seems like the footage would have to go from the camera, to the external Hard Disk, to the Macbook, and back to the Hard Disk, seems like a big effort, which could lead to dropped frames.
I'm sure this has been encountered before, just asking another question to add to the original post, and also to help me decide.
One other thing, if it is ok with DV, would it be ok with Hi Def, as I plan to upgrade the camera some time soon, so I wouldn't like to pick something, that would soon be useless.

Raid card and scratch disk setup for FCP

Hi Guys
Can anybody tell me what is the correct way to set up a raid card and scratch disk for FCP if you have 3 x 2TB internal hard drives, with the OS on HD1 and drives 2 and 3 dedicated for FCP
Also with this i also have all my documents i.e work stuff, invoices, pictures, music ect from my old windows PC and used to have them stored on HD2 with the Windows 7 OS on HD1 - i have been told that it is fine if i put this on the same drives as FCP is this correct...?
i only ask this as i have been told how to do it in different ways by 3 people......

Thanks John, although i'm rather embarrassed to admit that I am a complete newbie when it comes to technical/computer hardware terms (i.e. I have no idea about different types of disks, other than a HDD and a SSD, or even what the difference is between your media cache and a scratch disk).
This means that after reading all the links you so helpfully provided hasn't done much other than making me feel even more stupid!
The best that I can conclude from what I think that i've understood is that I will use:
Intel 530 Series 120GB SSD for O/S, Programs (and Pagefile?? No idea what this is, sorry)
Samsung 840BW 500GB - Scratch Disk (is this the media cache?) and preview
Seagate Barracuda 3TB HDD - media, projects, and exports
Please tell me if i've got something around the wrong way....
Thanks again.

I lost the installation disks for CS4 master collection. Where can I download the installation file?

Hello,
I lost the installation disks for CS4 master collection polish version. Where can I download the installation file?

Hi filmowka,
Welcome to the Community!
Go to http://prodesigntools.com/download-adobe-cs4-and-cs3-free-trials-here.html and choose Master collection CS4 from the list.
Follow the Very Important Section else the download will not start.
Thanks!
Ankit

Media/Disk cache, etc. setup for a desktop and laptop dual configuration

Hi,
(New User)
I have a desktop at home, and a laptop. I split my time about 50/50 between the two. I use it for AE, PP, PS mainly
Desktop hard drive setup:
1 SSD (Currently, Windows 8 and Adobe CC installed)
2 - 1TB (7200rpm) drives (1 drive is where I put my project files (gets sync'd with google drive) and the other drive isn't being used at the moment)
Laptop:
1TB Hard drvie (Of course, Win 8 and Adobe CC installed) (And, the folder where I do my projects gets sync'd with google drive).
As you can see, because I split my time between a laptop and desktop, I need to be working with the most current files (which is why I sync them through google drive).
My question is (please remember I am new), where should I set up disk cache, media cache, and anything else so that it is effecient and more importantly so I can use either my laptop or desktop to work on the same files?
Again, I barely know what I am talking about here. I really don't understand what media cache, disk cache, etc. is. I am trying to learn but I want to get this setup first so I can start with the tutorials on lynda.com.
Thanks,
Chris

First you do not need disk cache for all projects. For some it may even get in the way. Second, put your disk cache wherever you would like. If you have a second drive that is fast, use that. If you have room on your SSD drive, use that.
If you get into trouble with a comp and previews are fouled up or things just don't look right, empty your disk cache. It's not a necessity for working with AE, it's just a convenience for some projects that may help you work a little faster.

CS3 Design Premium won't install - Asking for CS4 disk 1

I own both CS3 Design Premium and CS4 Production Premium on my iMac with Snow Leopard. Mac OS X 10.5.8
I have all CS4 programs installed. I only have Dreamweaver installed on CS3.
I need to use InDesign and tried to install from CS3 Design Premium disk. After disk one runs for a short time, the program asks me to insert disk 1 from CS4 Production Premium. After reading that disk, it asks to put CS3 disk 1 in. These messages continue and I can't get anywhere.
Anything I can do? Uninstall both programs and reinstall?
Thanks

Inserting the disks over a dozen times a piece finished the installation.

Disk Setup for CS4

Similar Messages

Maybe you are looking for