Disk Swapping Issue: Error 1013000 loading application: Unable to Create Request Server Thread

I am still getting the server thread issue (see earler posting), despite having increased the SERVERTHREADS parameter. We seem to hit a limit on the number of applications that can be loaded at any one time, and as soon as it is reached, the error appears. Unload a few applications and the error temporarily goes away.When looking at the disk swapping section in the "System Info" tab of the "Server Information" dialog, the status is "Enabled, File not Found". We have less than 4Gbs of memory (3,833,168), so Essbase should be able to display the swap file. The servers that we are experiencing this problem have Windows 2003 installed, with Essbase 6.5.5. The old server that does have this problem is running Windows 2000 and Essbase 6.5.5.On the compatibility section of the Hyperion web-site, they confirm that Essbase 6.5.5 and Windows 2003 will work.Any ideas, apart from installing Windows 2000, which apparently isn't an option?!Cheers,Doug

I think I've found the problem! It seems the server team didn't set up the swap file, hence, when physical memory started to run a little low on the box, the thread could not be created. FYI, we had already increased the SERVERTHREADS option in the Essbase.cfg file.

Similar Messages

  • Error 1013000 loading application: Unable to Create Request Server Thread

    We are currently getting the following error "Error 1013000 loading application: Unable to Create Request Server Thread" when attempting to load more than 5 applications onto our new Essbase server. The O/S is Windows 2003 and we are running Essbase 6.5.5. Our old server, running Windows 2000, is not experiencing this problem.

    I think I've found the problem! It seems the server team didn't set up the swap file, hence, when physical memory started to run a little low on the box, the thread could not be created. FYI, we had already increased the SERVERTHREADS option in the Essbase.cfg file.

  • Error while loading application

    Hi,
    I'm not sure this is the right forum, but I try anyway.
    I'm trying to use a 3rd party Java application Unico (just use it, I don't develop anything of that) that after working for weeks, suddenly refuses to load at startup, and returns an error like "Error while loading application" (no error code number no other hint about the problem).
    The tests that did not work: 1. I installed the Unico again, 2. I created a new login and installed Unico in that login, 3. I started in safe mode (pressing shift at startup) - I always had the same message and loading aborted.
    The only workaround I found is to use an external startup disk, that I fortunately had available to face cases like this: when starting the system up from that disk Unico WORKS, not only, but I can even use the same application in my internal disk that does not load otherwise.
    My first conclusion is that something wrong happened to my system on the startup disk that prevents loading a Java application. The user Library seems to make no difference.
    So my questions to the Java experts are:
    - what in the system could suddenly block the loading of a Java application ? where should I look in the system (I can use the terminal and know something about UNIX) to fix this ? could this be caused by a permission problem ? (it looks a lot alike, but repairing permissions in Disk Utility didn't help) if so where are the Java support files stored in the Library and System Library to check and compare between the good and the bad system ?
    - is there a better workaround to this problem, other than starting up from a different disk ?
    Some additional info:
    - the application Unico is freely provided by the Italian tax organization, so there is basically no support to use it...
    - Unico requires Java 1.3.1: my system is constantly updated/upgraded and it runs the most recent release that is 1.4.0 (I guess...) and anyway worked very well till a week ago.
    - since the last time the application had worked I installed two (non Apple) packages: the TomTom (GPS navigator) setup application, and new Epson printer drivers for my new printer.
    - in all cases I repaired permissions and I also verified the disk with the disk utility
    - Unico does not uses printers (it creates pdf files instead) and does not use USB, which in turn is used by both the Epson driver and the TomTom app.
    So I cannot connect the Unico malfunctioning to this new SW except for the fact that I cannot find any other answer...
    Thanks to anybody having any suggestion about
    Piero

    I made some research: it seems to me that most (if not all) the Java machine is in the /System/Library/Framework/JavaVM.framework folder: but I found no evident difference in the file permissions between the good and the bad system (see my previous posts).
    There are other locations where there are java related files: eg in Javaconfig.plist (in /System/Library/Java) that seems to name the locations for all components of the java machine. I checked some files in /usr/bin referenced in the .plist: again no difference.
    Something "could" be a clue; just before the crashing point the Unico (java) program causes a message in the Console:
    "[JavaAppLauncher Warning] Specifying a specific version for JVMVersion 1.3.1 is deprecated. Use the more general 1.3* instead."
    This would be a clue... except that this message appears also when the program loads without problem (in the "good" system where it works). So it is more a warning.
    Another clue is the message that appears in the console in the "good" system when the Unico loads correctly; and this seems really an error message (whateve it means):
    "Index 1 for 'pxm#' 2062 out of range (must be between 0 and 0)
    Attempted to read past end of 'pxm#'(2062) resource"
    The funny thing is that when this message appears, Unico loads with no probem, while in the "bad" system it doesn't even get to this point.
    So in my opinion both messages are irrilevant to identify the problem.
    Or not ?
    And again my main question is: what in the system could suddenly block the loading of a Java application ?
    Thanks for any hint
    Piero

  • I am trying to export my iPhotos to an external HDD. As soon as it gets to 200 photos, I get an error message that says unable to create volumes/freecom/my pictures. Can i remove this limit or increase it? I have nearly 17,000 pictures to export.

    I am trying to export my iPhotos to an external HDD. As soon as it gets to 200 photos, I get an error message that says unable to create volumes/freecom/my pictures. Can i remove this limit or increase it? I have nearly 17,000 pictures to export.

    1. What format is the external drive? It sounds like it's ina format that Macs can't write to. Is it a NAS or NTFS?
    2. Easiest thing: just move your iPhoto Library to the external
    Make sure the drive is formatted Mac OS Extended (Journaled)
    1. Quit iPhoto
    2. Copy the iPhoto Library from your Pictures Folder to the External Disk.
    3. Hold down the option (or alt) key while launching iPhoto. From the resulting menu select 'Choose Library' and navigate to the new location. From that point on this will be the default location of your library.
    4. Test the library and when you're sure all is well, trash the one on your internal HD to free up space.
    Regards
    TD

  • Help! Unable to create new native thread

    Ok I see this problem all over the web but most of the posts are many years old and still leave me a little confused.  Often at random times on the same tags like CFLDAP I get the error "Unable to create new native thread".  Then a few minutes later the same tag on the same page works just fine.
    I have 4GB of memory in this box with 1400 MB set as the maximum Java heap size by the way.
    Here are my arguments from the jvm.config file.
    # Arguments to VM
    java.args=-server  -Xmx1400m -Dsun.io.useCanonCaches=false -XX:MaxPermSize=192m -XX:+UseParallelGC -Dcoldfusion.rootDir={application.home}/../ -Dcoldfusion.libPath={application.home}/../lib -Dcoldfusion.classPath={application.home}/../lib/updates,{application.home}/../lib,{appli cation.home}/../gateway/lib/,{application.home}/../wwwroot/WEB-INF/flex/jars,{application. home}/../wwwroot/WEB-INF/cfform/jars,"C:\\Program Files\\Apache Software Foundation\\Apache2.2\\htdocs\\InterWeb-Prod\\includes\\classes"
    Here is a typical error that comes through.
    struct     
    Browser     Mozilla/5.0 (Windows; U; Windows NT 6.1; en-US) AppleWebKit/533.4 (KHTML, like Gecko) Chrome/5.0.375.70 Safari/533.4    
    DateTime    {ts '2010-06-23 10:07:44'}  
    Diagnostics unable to create new native thread null <br>The error occurred on line 122.
    GeneratedContent      
    HTTPReferer http://--------------------/index.cfm?FuseAction=HR.main    
    Mailto      interweb@--------------------- 
    Message     unable to create new native thread      
    QueryString fuseaction=ManagedLists.MailSubscriptions     
    RemoteAddress     192.168.250.124
    RootCause   struct    
    Message     unable to create new native thread      
    StackTrace          java.lang.OutOfMemoryError: unable to create new native thread at java.lang.Thread.start0(Native Method) at java.lang.Thread.start(Thread.java:597) at com.sun.jndi.ldap.Connection.<init>(Connection.java:208) at com.sun.jndi.ldap.LdapClient.<init>(LdapClient.java:112) at com.sun.jndi.ldap.LdapCtx.connect(LdapCtx.java:2504) at com.sun.jndi.ldap.LdapCtx.<init>(LdapCtx.java:263) at com.sun.jndi.ldap.LdapCtxFactory.getInitialContext(LdapCtxFactory.java:76) at javax.naming.spi.NamingManager.getInitialContext(NamingManager.java:667) at javax.naming.InitialContext.getDefaultInitCtx(InitialContext.java:288) at javax.naming.InitialContext.init(InitialContext.java:223) at javax.naming.InitialContext.<init>(InitialContext.java:197) at javax.naming.directory.InitialDirContext.<init>(InitialDirContext.java:82) at coldfusion.tagext.net.LdapTag.do_ActionQuery(LdapTag.java:839) at coldfusion.tagext.net.LdapTag.doStartTag(LdapTag.java:616) at coldfusion.runtime.CfJspPage._emptyTcfTag(CfJspPage.java:2661) at cfadfunctions2ecfm1473603830$funcADLOOKUPUSERNAME.runFunction(C:\Program Files\Apache Software Foundation\Apache2.2\htdocs\InterWeb-Prod\includes\adfunctions.cfm:122) at coldfusion.runtime.UDFMethod.invoke(UDFMethod.java:418) at coldfusion.runtime.UDFMethod$ArgumentCollectionFilter.invoke(UDFMethod.java:324) at coldfusion.filter.FunctionAccessFilter.invoke(FunctionAccessFilter.java:59) at coldfusion.runtime.UDFMethod.runFilterChain(UDFMethod.java:277) at coldfusion.runtime.UDFMethod.invoke(UDFMethod.java:192) at coldfusion.runtime.CfJspPage._invokeUDF(CfJspPage.java:2471) at cfadfunctions2ecfm1473603830$funcADLOOKUPMULTIPLEUSERNAMES.runFunction(C:\Program Files\Apache Software Foundation\Apache2.2\htdocs\InterWeb-Prod\includes\adfunctions.cfm:54) at coldfusion.runtime.UDFMethod.invoke(UDFMethod.java:418) at coldfusion.runtime.UDFMethod$ArgumentCollectionFilter.invoke(UDFMethod.java:324) at coldfusion.filter.FunctionAccessFilter.invoke(FunctionAccessFilter.java:59) at coldfusion.runtime.UDFMethod.runFilterChain(UDFMethod.java:277) at coldfusion.runtime.UDFMethod.invoke(UDFMethod.java:192) at coldfusion.runtime.CfJspPage._invokeUDF(CfJspPage.java:2471) at cfdsp_managedlists2ecfm55598920.runPage(C:\Program Files\Apache Software Foundation\Apache2.2\htdocs\InterWeb-Prod\hr\managedlists\dsp_managedlists.cfm:232) at coldfusion.runtime.CfJspPage.invoke(CfJspPage.java:196) at coldfusion.tagext.lang.IncludeTag.doStartTag(IncludeTag.java:370) at coldfusion.runtime.CfJspPage._emptyTcfTag(CfJspPage.java:2661) at cffbx_switch2ecfm2121232114.runPage(C:\Program Files\Apache Software Foundation\Apache2.2\htdocs\InterWeb-Prod\hr\managedlists\fbx_switch.cfm:23) at coldfusion.runtime.CfJspPage.invoke(CfJspPage.java:196) at coldfusion.tagext.lang.IncludeTag.doStartTag(IncludeTag.java:370) at coldfusion.runtime.CfJspPage._emptyTcfTag(CfJspPage.java:2661) at cffbx_fusebox30_cf502ecfm1180471387._factor4(C:\Program Files\Apache Software Foundation\Apache2.2\htdocs\InterWeb-Prod\fbx_fusebox30_cf50.cfm:241) at cffbx_fusebox30_cf502ecfm1180471387._factor5(C:\Program Files\Apache Software Foundation\Apache2.2\htdocs\InterWeb-Prod\fbx_fusebox30_cf50.cfm:1) at cffbx_fusebox30_cf502ecfm1180471387.runPage(C:\Program Files\Apache Software Foundation\Apache2.2\htdocs\InterWeb-Prod\fbx_fusebox30_cf50.cfm:1) at coldfusion.runtime.CfJspPage.invoke(CfJspPage.java:196) at coldfusion.tagext.lang.IncludeTag.doStartTag(IncludeTag.java:370) at coldfusion.runtime.CfJspPage._emptyTcfTag(CfJspPage.java:2661) at cfindex2ecfm749274359.runPage(C:\Program Files\Apache Software Foundation\Apache2.2\htdocs\InterWeb-Prod\index.cfm:23) at coldfusion.runtime.CfJspPage.invoke(CfJspPage.java:196) at coldfusion.tagext.lang.IncludeTag.doStartTag(IncludeTag.java:370) at coldfusion.filter.CfincludeFilter.invoke(CfincludeFilter.java:65) at coldfusion.filter.ApplicationFilter.invoke(ApplicationFilter.java:273) at coldfusion.filter.RequestMonitorFilter.invoke(RequestMonitorFilter.java:48) at coldfusion.filter.MonitoringFilter.invoke(MonitoringFilter.java:40) at coldfusion.filter.PathFilter.invoke(PathFilter.java:86) at coldfusion.filter.ExceptionFilter.invoke(ExceptionFilter.java:70) at coldfusion.filter.ClientScopePersistenceFilter.invoke(ClientScopePersistenceFilter.java:2 8) at coldfusion.filter.BrowserFilter.invoke(BrowserFilter.java:38) at coldfusion.filter.NoCacheFilter.invoke(NoCacheFilter.java:46) at coldfusion.filter.GlobalsFilter.invoke(GlobalsFilter.java:38) at coldfusion.filter.DatasourceFilter.invoke(DatasourceFilter.java:22) at coldfusion.CfmServlet.service(CfmServlet.java:175) at coldfusion.bootstrap.BootstrapServlet.service(BootstrapServlet.java:89) at jrun.servlet.FilterChain.doFilter(FilterChain.java:86) at coldfusion.monitor.event.MonitoringServletFilter.doFilter(MonitoringServletFilter.java:42 ) at coldfusion.bootstrap.BootstrapFilter.doFilter(BootstrapFilter.java:46) at jrun.servlet.FilterChain.doFilter(FilterChain.java:94) at jrun.servlet.FilterChain.service(FilterChain.java:101) at jrun.servlet.ServletInvoker.invoke(ServletInvoker.java:106) at jrun.servlet.JRunInvokerChain.invokeNext(JRunInvokerChain.java:42) at jrun.servlet.JRunRequestDispatcher.invoke(JRunRequestDispatcher.java:286) at jrun.servlet.ServletEngineService.dispatch(ServletEngineService.java:543) at jrun.servlet.jrpp.JRunProxyService.invokeRunnable(JRunProxyService.java:203) at jrunx.scheduler.ThreadPool$DownstreamMetrics.invokeRunnable(ThreadPool.java:320) at jrunx.scheduler.ThreadPool$ThreadThrottle.invokeRunnable(ThreadPool.java:428) at jrunx.scheduler.ThreadPool$UpstreamMetrics.invokeRunnable(ThreadPool.java:266) at jrunx.scheduler.WorkerThread.run(WorkerThread.java:66)  
    I could really use some help figuring this out.  We are getting random errors a few times a day and usually in places where we are using CFLDAP.
    Thanks,
    David

    Absolutely unbelievable that this has been going on for 4 YEARS and there are still NO definitive answers from Adobe!!
    There's no definite answer from Adobe, because there's no definitive single question.  These errors come up because - for any number of possible reasons - the JVM becomes overloaded.  And it's almost always down to an issue with the application code being run, and nothing to do with CF, per-se.  So what's Adobe supposed to do?  Come and fix your application for you?  There are plenty of diagnostic tools out there - some built into CF itself - which you could use to sort the problem out.  Or you could hire someone like Mike Brunt to come and have a look at your set up.  All it takes to fix these things is to actually do something about fixing it, rather than slamming one's fist on the desk saying "why doesn't Adobe do something!"
    I thought - and my knowledge in the area isn't expansive - the inability to allocate threads was down to the app being choked up: threads are a finite commodity, and if requests are queuing up faster than the JVM can clear them, you're gonna get errors eventually.  What causes this sort of thing?  More traffic than the server can process.  This could be because of server kit, or it could be due to code that doesn't scale to the requirement.  Usually the latter.  Basically one cannot polish a turd.
    I have a 24x7 production server that services 180,000 clients in 300 countries around the clock that cannot afford to be down for more than a few minutes at a time.
    I'm running Windows 2008 32-bit with 4GB of RAM because I have some graphics software that cannot tolerate a 64-bit OS.  Everything has been running fine for the past few months, but now it's starting to crash more and more frequently.  I have CF 8.0.1.195765 and Java 1.6.0_04
    How many concurrent requests for 180000 clients generate?  The number of clients matters less than how heavily the site is used.  But, to be honest, I get the impression the implication is "it's a busy site", in which case I think your hardware is a bit on the lean side.  Also, if it's a mission-critical app, running it on a single server is probably ill-advised, just from a fault-tolerance perspective even before one starts thinking about performance.
    If I was in your situation, I'd consider the following options:
    * upgrade your JVM to the most recent version (1.6.0_21?)
    * put more RAM in the box, and run a second CF instance on it.
    * get another box.
    * refactor the environment so the graphics software runs on a different box, upgrading the CF server to 64-bit (again, with more RAM)
    * run some diagnostics on the server, seeing what's taking up threads and where any bottlenecks might be
    * get an expert in to do the analysis side of things.
    * stop expecting Adode to fix "something".
    One of my other symptoms I have noticed is that any work done using RDP starts getting really really bogged down.  Opening Windows Explorer and searching for files can take minutes.  Restarting the CF service will sometimes fail to complete, and you have to wait a few minutes before the manual Start option appears in the dropdown.  Maybe coincidentally, the Performance Monitor will fail to add any of the ColdFusion metrics, for example Running Requests and Queued Requests, and the Event Monitor shows an error relating to an 8-byte boundary not being maintained.
    You don't, by any chance, store your client variables in the registry do you?  The only time I've seen this happen is when the CF box is munging the OS environment, and the only way I can think this could happen if it was clogging the registry.  Never store client variables in the registry.
    Adam

  • Java.lang.OutOfMemoryError: unable to create new native thread

    Hi All,
    I have installed weblogic server 8 sp4 in production environment . I am facing problems with JVM issues .
    JVM is crashing very frequently with the following errro :
    ####<Jun 18, 2009 10:58:22 AM IST> <Info> <Common> <IMM90K-21> <SalesCom> <ExecuteThread: '24' for queue: 'weblogic.kernel.Default'> <<anonymous>> <> <BEA-000628> <Created "1" resources for pool "PIConnectionPool", out of which "1" are available and "0" are unavailable.>
    ####<Jun 18, 2009 11:00:09 AM IST> <Info> <EJB> <IMM90K-21> <SalesCom> <ExecuteThread: '23' for queue: 'weblogic.kernel.Default'> <<anonymous>> <> <BEA-010051> <EJB Exception occurred during invocation from home: payoutCheck.ejb.payoutCheck_s6v3so_HomeImpl@121a735 threw exception: java.lang.OutOfMemoryError: unable to create new native thread
    java.lang.OutOfMemoryError: unable to create new native thread
         at java.lang.Thread.start(Native Method)
         at payoutCheck.classes.MyThread2.MyThreadv(PayoutCheckBOImpl.java:249)
         at payoutCheck.classes.PayoutCheckBOImpl.genSP(PayoutCheckBOImpl.java:184)
         at payoutCheck.ejb.PayoutCheckSLSB.genSP(PayoutCheckSLSB.java:191)
         at payoutCheck.ejb.payoutCheck_s6v3so_EOImpl.genSP(payoutCheck_s6v3so_EOImpl.java:315)
         at payoutCheck.ejb.payoutCheck_s6v3so_EOImpl_CBV.genSP(Unknown Source)
         at payoutCheck.deligate.PayoutCheckBD.genSP(PayoutCheckBD.java:226)
         at ui.action.SearchAction.callFilter(SearchAction.java:378)
         at sun.reflect.GeneratedMethodAccessor201.invoke(Unknown Source)
         at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
         at java.lang.reflect.Method.invoke(Method.java:324)
         at org.apache.struts.actions.DispatchAction.dispatchMethod(DispatchAction.java:280)
         at org.apache.struts.actions.DispatchAction.execute(DispatchAction.java:220)
         at org.apache.struts.action.RequestProcessor.processActionPerform(RequestProcessor.java:446)
         at org.apache.struts.action.RequestProcessor.process(RequestProcessor.java:266)
         at org.apache.struts.action.ActionServlet.process(ActionServlet.java:1292)
         at org.apache.struts.action.ActionServlet.doPost(ActionServlet.java:510)
         at javax.servlet.http.HttpServlet.service(HttpServlet.java:760)
         at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
         at weblogic.servlet.internal.ServletStubImpl$ServletInvocationAction.run(ServletStubImpl.java:1006)
         at weblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubImpl.java:419)
         at weblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubImpl.java:315)
         at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(WebAppServletContext.java:6718)
         at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
         at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:121)
         at weblogic.servlet.internal.WebAppServletContext.invokeServlet(WebAppServletContext.java:3764)
         at weblogic.servlet.internal.ServletRequestImpl.execute(ServletRequestImpl.java:2644)
         at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:219)
         at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:178)
    >
    The above mentioned is coming several times , anybody please help out to get rid of this issue.
    Thanks in advance ,
    Krikar.

    This only tells you that the JVM is running out of heap space. It doesn't tell you what is causing the problem. You likely have a memory leak, but you could also try increasing the max heap size of the JVM (-Xmx command line option). It would help to watch the % mem in use statistic, but only immediately after a garbage collection cycle (you can force a GC from the admin console). If the % mem in use after the GC is increasing over time, then that likely confirms you have a memory leak. Note that looking at that statistic during the server startup probably is irrelevant. You'd need to wait until the server finishes starting up, and likely processed a few messages (to load static data).
    If you get to the point of confirming that you have a memory leak, that requires doing detailed analysis with a Java profiler (JProfiler, JProbe, YourKit, etc.) to track down the source of the leak.

  • BEA-002606 Unable to create a server socket for listening on channel

    Hi,
    I am trying to stand up JDEVELOPER suite 11.1.2 on Windows 7 64 Bit.
    When I sreate a sample app and try to compile, I get the error:
    <Error> <Server> <BEA-002606> <Unable to create a server socket for listening on channel "DefaultSecure". The address 192.168.56.101 might be incorrect or another process is using port 7102: java.net.BindException: Cannot assign requested address: JVM_Bind.>
    This IP is not active on my machine, although it was initialized at one point through a VBox instance I installed. I have tried to clean off the VBOX instance and the JDEVELOPER, rebooting between loads. Can anyone help me get what look like a ghost IP off my machine. Note: I set the weblogic server to port 8003, so I am also not sure why itis looking at port 7002.
    Thanks
    JT

    It is the integrated server. I have taken everything off (JDev adn VBOX) and cleaned some of the hard to find file structures just to make sure there wasn't a hidden config file I was missing.
    I am new to Web Logic, so I was hoping to get the integrated server running first and then learn the ins and outs of deployment to a production system.

  • Java.lang.OutOfMemoryError: unable to create new native thread on Win2000

    Dear all,
    I install a java server (SAP J2EE) on the windows machine and run into the following problem: the total number of threads cannot exceed 1200 (as i see this in the task manager)
    After it does reach this number no other tasks can be started. Thereafter i get java.lang.OutOfMemoryError: unable to create new native thread error .
    However the other machine where the same distribution of Win2000 Server is installed can easily coupe with more than 2500 theads. The same is true when the safe mode on the first machine is on: I can generate more than 1200 threads. So it seems the problem has something to do with Windows itself.
    I am really puzzled here, would really appreciate any help.
    Thanks in advance,
    Dimitry
    Surkov Dimitry
    [email protected]
    +49.1632.492618

    well, i do not supply any options when i start jvm, but it is not the course:
    it also happens with c programs. however in the safe mode it works. both for c and for java program.
    so it must be either some software (however memory is ok) or ...? i am lost. In some Unix system you can set the total number of threads allowed as an option in the kernal. But i guess this is not the case with windows.
    Thanks a lot for your reply,
    dimitry

  • It says "unable to connect requested server" every time i try

    it keeps on saying "unable to connect requested server" every time i try t open any website,wi fi is perfectly connected to phone there is no problem with wifi,it was working till yesterday but today i am facing this prblem,please let me know solution as soon as possible.
    Solved!
    Go to Solution.

    Hi and Welcome to the Forums!
    Can you clarify please? You say you cannot connect to servers, then you say WiFi is perfect. Then you say it was OK until yesterday. So I am confused about what you are attemting to do...is it via WiFi or via your carrier data network connection?
    Anytime random strange behavior or sluggishness creeps in, the first thing to do is a battery pop reboot. With power ON, remove the back cover and pull out the battery. Wait about a minute then replace the battery and cover. Power up and wait patiently through the long reboot -- ~5 minutes. See if things have returned to good operation. Like all computing devices, BB's suffer from memory leaks and such...with a hard reboot being the best cure.
    Best!
    Occam's Razor nearly always applies when troubleshooting technology issues!
    If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
    Join our BBM Channels
    BSCF General Channel
    PIN: C0001B7B4   Display/Scan Bar Code
    Knowledge Base Updates
    PIN: C0005A9AA   Display/Scan Bar Code

  • WiFi unable to find requested server...

    I have an 8120 Pearl and I successfully connected to my home WiFi network. But, whenever i try to access a website, google.com for example, I'm getting "unable to find the requested server". I don't have a BB data plan, but I shouldn't need one when using wifi, so what could it be? I have security enabled WPA and I'm able to connect using my iPhone and 3 laptops... does WPA have anything to do with it?
    The browser is set to hotspot browser and also here are my wifi diagnostics:
    WiFi
    Current Profile: HZ_wifi
    SSID: HZ_wifi
    Security Type: Pre-Shared Key (PSK)
    Local IP Address: 192.168.1.4
    Signal level: -49dBm
    Connection Data Rate: 48Mbps
    Status: Network acquired
    I've tried power cyclying the router and that didn't help, I am able to connect via wifi on my friends network so it can't be the phone, and its not the router, i can only think its that the two are incompatible, could this be the case?
    Message Edited by giyad on 06-26-2009 11:17 AM

    I do have the exact problem with my bold, I have my laptop and a nokia phone connected to home wi-fi and both working perfectly.
    the issue with the bold is that it connects to the wi-fi network but it works only for few minutes and then the browser says: "Unable to find requested server" and the Wi-fi mark changes to gray after i was able to visit few sites. i dont have or intend to have a data plan as I have access to Wi-fi connection almost all the time. I have tried resetting the router and it didn't work. Any one with the right solution???

  • I keep getting 'unable to find requested server' while trying to go on internet

    I bought the Blackberry curve last week and have had pblms connecting to home wi fi.  I have it all set up and the fone recognises the wi fi on it and only let me connect once to the wi fi. After that it keeps coming up with the message - unable to find requested server - even though it did work once the first time after I had set up the wi fi wizard.  I had put in the key.  Can someone help please.

    Hi gerrybl,
    Welcome to the Suppport Forums!
    Can you provide more information please?
    Do you have a data plan with your wireless provider that includes internet browsing?
    Are you able to complete all the steps in this blog post to connect to Wi-Fi? http://bbry.lv/oXh7oV
    Are you able to connect to any other Wi-Fi networks or Hotspots?
    Thanks,
    -FS
    Come follow your BlackBerry Technical Team on Twitter! @BlackBerryHelp
    Be sure to click Kudos! for those who have helped you.
    Click Solution? for posts that have solved your issue(s)!

  • Unable to find requested server

     have a contract with a data plan but when I try to use my wifi at home it says that I am connected but when I go to the internet brower it tells me "Unable to find requested server". This only happends on my wifi at home. My other devices work without a problem on my home wifi. What do I need to do to get my Blackberry Torch 9800 to work off from my home wifi?

    I had this problem untl I setup a Hom Network that included my smartphone which shows up with it's own separate IP address. My office PC is the host and it is ethernet or wired network. I have 2 wire gateway wifi modem and all is supported by my carrier. I feel confident if you contact your ISP and ask for help in setting up a Home Network your problem will be solved. Btw, make sure your wireless Customer Service is informed by their Internet Service Support and by yourself. Good luck

  • Strange error when loading application

    We are trying to load our application and have increased the Execute
    Queue thread count from 50 to 100 (nowt scientific - just want to see
    what it does and will then look to tune in a more structure fashion).
    Also increased the JDBC connection pool as well.
    When we start WLS all is OK but the moment the load starts everything
    hangs and WLS has the following exception in the log.
    It seems very strange as it seems to think that the jts_jdbc pool
    already exists, yet we only have one entry in the config.xml as
    follows:
    <JDBCConnectionPool CapacityIncrement="1"
    DriverName="oracle.jdbc.driver.OracleDriver"
    InitialCapacity="50" MaxCapacity="100" Name="ejbPool"
    Properties="user=javelin;password=javelin;dll=ocijdbc8;server=fhukstdb.f
    undshub.com;protocol=oci8"
    Targets="javelin" URL="jdbc:oracle:oci8:"/>
    I suppose that by loading with 250 simulated users, 50 connections are
    being created initially and then we are making WLS create the other 50
    - but Oracle is set to 300 concurrent processes and we don't seem to
    be getting as far as the database!
    Any ideas?
    TIA
    <07-Jun-02 00:09:57 BST> <Error> <JTA> <Unable to create resource
    runtime bean
    javax.management.InstanceAlreadyExistsException:
    javelinDomain:Location=javelin,Name=JTAResourceRuntime_weblogic.jdbc.jts.Connection,ServerRuntime=javelin,Type=TransactionResourceRuntime
    at com.sun.management.jmx.RepositorySupport.addMBean(RepositorySupport.java:134)
    at com.sun.management.jmx.MBeanServerImpl.internal_addObject(MBeanServerImpl.java:2352)
    at com.sun.management.jmx.MBeanServerImpl.registerMBean(MBeanServerImpl.java:874)
    at weblogic.management.internal.RemoteMBeanServerImpl.registerMBean(RemoteMBeanServerImpl.java:177)
    at weblogic.management.runtime.RuntimeMBeanDelegate.register(RuntimeMBeanDelegate.java:94)
    at weblogic.management.runtime.RuntimeMBeanDelegate.<init>(RuntimeMBeanDelegate.java:83)
    at weblogic.management.runtime.RuntimeMBeanDelegate.<init>(RuntimeMBeanDelegate.java:53)
    at weblogic.management.runtime.RuntimeMBeanDelegate.<init>(RuntimeMBeanDelegate.java:63)
    at weblogic.transaction.internal.JTAStatisticsImpl.<init>(JTAStatisticsImpl.java:25)
    at weblogic.transaction.internal.TransactionResourceRuntimeImpl.<init>(TransactionResourceRuntimeImpl.java:25)
    at weblogic.transaction.internal.JTARuntimeImpl.registerResource(JTARuntimeImpl.java:191)
    at weblogic.transaction.internal.ResourceDescriptor.registerMBean(ResourceDescriptor.java:1164)
    at weblogic.transaction.internal.ResourceDescriptor.initXAResource(ResourceDescriptor.java:231)
    at weblogic.transaction.internal.ResourceDescriptor.getOrCreate(ResourceDescriptor.java:325)
    at weblogic.transaction.internal.ServerResourceInfo.<init>(ServerResourceInfo.java:173)
    at weblogic.transaction.internal.ServerTransactionImpl.enlistResource(ServerTransactionImpl.java:364)
    at weblogic.jdbc.jts.Driver.createLocalConnection(Driver.java:166)
    at weblogic.jdbc.jts.Driver.connect(Driver.java:135)
    at com.company.server.impl.generated.SecurityAdminServiceSB.hasAccessToFeature(impl/generated/SecurityAdminServiceSB.java:273)
    at com.company.server.impl.generated.SecurityAdminServiceSB_tjkg0y_EOImpl.hasAccessToFeature(SecurityAdminServiceSB_tjkg0y_EOImpl.java:4833)
    at com.company.servlet.LoginAPI.hasAccessToFeature(LoginAPI.java:400)
    at java.lang.reflect.Method.invoke(Native Method)
    at com.company.applicationServices.Dish.dishInit(Dish.java:299)
    at com.company.applicationServices.Dish.<init>(Dish.java:84)
    at com.company.servlet.PublicServlet.doImplementation(PublicServlet.java:241)
    at com.company.servlet.PublicServlet.doGet(PublicServlet.java:137)
    at javax.servlet.http.HttpServlet.service(HttpServlet.java:740)
    at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
    at weblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubImpl.java:263)
    at weblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubImpl.java:200)
    at weblogic.servlet.internal.WebAppServletContext.invokeServlet(WebAppServletContext.java:2390)
    at weblogic.servlet.internal.ServletRequestImpl.execute(ServletRequestImpl.java:1959)
    at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:137)
    at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:120)
    --------------- nested within: ------------------
    weblogic.management.ManagementException: - with nested exception:
    [javax.management.InstanceAlreadyExistsException:
    javelinDomain:Location=javelin,Name=JTAResourceRuntime_weblogic.jdbc.jts.Connection,ServerRuntime=javelin,Type=TransactionResourceRuntime]
    at weblogic.management.runtime.RuntimeMBeanDelegate.register(RuntimeMBeanDelegate.java:96)
    at weblogic.management.runtime.RuntimeMBeanDelegate.<init>(RuntimeMBeanDelegate.java:83)
    at weblogic.management.runtime.RuntimeMBeanDelegate.<init>(RuntimeMBeanDelegate.java:53)
    at weblogic.management.runtime.RuntimeMBeanDelegate.<init>(RuntimeMBeanDelegate.java:63)
    at weblogic.transaction.internal.JTAStatisticsImpl.<init>(JTAStatisticsImpl.java:25)
    at weblogic.transaction.internal.TransactionResourceRuntimeImpl.<init>(TransactionResourceRuntimeImpl.java:25)
    at weblogic.transaction.internal.JTARuntimeImpl.registerResource(JTARuntimeImpl.java:191)
    at weblogic.transaction.internal.ResourceDescriptor.registerMBean(ResourceDescriptor.java:1164)
    at weblogic.transaction.internal.ResourceDescriptor.initXAResource(ResourceDescriptor.java:231)
    at weblogic.transaction.internal.ResourceDescriptor.getOrCreate(ResourceDescriptor.java:325)
    at weblogic.transaction.internal.ServerResourceInfo.<init>(ServerResourceInfo.java:173)
    at weblogic.transaction.internal.ServerTransactionImpl.enlistResource(ServerTransactionImpl.java:364)
    at weblogic.jdbc.jts.Driver.createLocalConnection(Driver.java:166)
    at weblogic.jdbc.jts.Driver.connect(Driver.java:135)
    at com.company.server.impl.generated.SecurityAdminServiceSB.hasAccessToFeature(impl/generated/SecurityAdminServiceSB.java:273)
    at com.company.server.impl.generated.SecurityAdminServiceSB_tjkg0y_EOImpl.hasAccessToFeature(SecurityAdminServiceSB_tjkg0y_EOImpl.java:4833)
    at com.company.servlet.LoginAPI.hasAccessToFeature(LoginAPI.java:400)
    at java.lang.reflect.Method.invoke(Native Method)
    at com.company.applicationServices.Dish.dishInit(Dish.java:299)
    at com.company.applicationServices.Dish.<init>(Dish.java:84)
    at com.company.servlet.PublicServlet.doImplementation(PublicServlet.java:241)
    at com.company.servlet.PublicServlet.doGet(PublicServlet.java:137)
    at javax.servlet.http.HttpServlet.service(HttpServlet.java:740)
    at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
    at weblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubImpl.java:263)
    at weblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubImpl.java:200)
    at weblogic.servlet.internal.WebAppServletContext.invokeServlet(WebAppServletContext.java:2390)
    at weblogic.servlet.internal.ServletRequestImpl.execute(ServletRequestImpl.java:1959)
    at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:137)
    at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:120)

    Just for the benefit of anybody running into similar surprising difficulties: it is, in my case, a sniffer-problem.
    For determining the client browser's java-vendor from the applet, I used an old trick that used to work pretty well. The relevant part is where the vendor is SUN, but a distinction must be made between SUN java on SUN machines and SUN-java in MSIE. This is done as follows:
         String s = System.getProperty("java.vendor");
         if (s.indexOf("Microsoft") != -1) setJavaVendor(MICROSOFT);
         else if (s.indexOf("Netscape") != -1) setJavaVendor(NETSCAPE);
         else if (s.indexOf("Sun") != -1) {
              try {
    // ***> ay, there's the rub:
                   getWindow().eval("window.statusbar.visible");
                   setJavaVendor(SUN);
              } catch (Exception e) {
                   setJavaVendor(SUNINIE);
         } else setJavaVendor(UNKNOWN);
    The point is that the java-error is correctly caught (so the end result is as desired), but not the Javascript error that is generated external to the applet by the eval-command. So that is what triggers that error-popup in MSIE6, which does not have any consequences apart from being a nuisance.
    Why older MSIE-versions don't seem to mind and ignore the error escapes me, and is not a very intersting question anyway. The thing is just to replace the "statusbar" test by something not involving Javascript.
    One more reason to avoid using javascript for such purposes anyway is that Apple cannot make heads or tails of livewire (applets tapping into javascript).
    Rik

  • Design Studio Error while loading application

    Since our upgrade to 1.3 we get an error when loading a specific application. Everything else is fine.
    Where can we find further information? In the error log in eclipse is nothing to see.
    edit: where does sap save the application-files? maybe we can find and save them...

    try deleting the content of the folder below and reload the app.
    C:\Users\<user ID>\Analysis-workspace\.metadata

  • Disk Utility issue-Error: The underlying task reported failure on exit

    When I run Disk Utility on the hard drive( repair permissions/verify disk), I see an "illegal name" message and the following error message and DU will not complete the "verify disk" function.
    -Error: The underlying task reported failure on exit
    What does this mean and how do I fix it?
    Thanks, Pete
    iMac 17 G5 Mac OS X (10.4.3) Igb ddr ram and winning attitude

    Thanks, I have deleted the legal and legal. files but DU is erroring with this message now;
    Volume Header needs minor repair
    The volume Macintosh HD needs to be repaired.
    Error: The underlying task reported failure on exit

Maybe you are looking for