Strange error when loading application

We are trying to load our application and have increased the Execute
Queue thread count from 50 to 100 (nowt scientific - just want to see
what it does and will then look to tune in a more structure fashion).
Also increased the JDBC connection pool as well.
When we start WLS all is OK but the moment the load starts everything
hangs and WLS has the following exception in the log.
It seems very strange as it seems to think that the jts_jdbc pool
already exists, yet we only have one entry in the config.xml as
follows:
<JDBCConnectionPool CapacityIncrement="1"
DriverName="oracle.jdbc.driver.OracleDriver"
InitialCapacity="50" MaxCapacity="100" Name="ejbPool"
Properties="user=javelin;password=javelin;dll=ocijdbc8;server=fhukstdb.f
undshub.com;protocol=oci8"
Targets="javelin" URL="jdbc:oracle:oci8:"/>
I suppose that by loading with 250 simulated users, 50 connections are
being created initially and then we are making WLS create the other 50
- but Oracle is set to 300 concurrent processes and we don't seem to
be getting as far as the database!
Any ideas?
TIA
<07-Jun-02 00:09:57 BST> <Error> <JTA> <Unable to create resource
runtime bean
javax.management.InstanceAlreadyExistsException:
javelinDomain:Location=javelin,Name=JTAResourceRuntime_weblogic.jdbc.jts.Connection,ServerRuntime=javelin,Type=TransactionResourceRuntime
at com.sun.management.jmx.RepositorySupport.addMBean(RepositorySupport.java:134)
at com.sun.management.jmx.MBeanServerImpl.internal_addObject(MBeanServerImpl.java:2352)
at com.sun.management.jmx.MBeanServerImpl.registerMBean(MBeanServerImpl.java:874)
at weblogic.management.internal.RemoteMBeanServerImpl.registerMBean(RemoteMBeanServerImpl.java:177)
at weblogic.management.runtime.RuntimeMBeanDelegate.register(RuntimeMBeanDelegate.java:94)
at weblogic.management.runtime.RuntimeMBeanDelegate.<init>(RuntimeMBeanDelegate.java:83)
at weblogic.management.runtime.RuntimeMBeanDelegate.<init>(RuntimeMBeanDelegate.java:53)
at weblogic.management.runtime.RuntimeMBeanDelegate.<init>(RuntimeMBeanDelegate.java:63)
at weblogic.transaction.internal.JTAStatisticsImpl.<init>(JTAStatisticsImpl.java:25)
at weblogic.transaction.internal.TransactionResourceRuntimeImpl.<init>(TransactionResourceRuntimeImpl.java:25)
at weblogic.transaction.internal.JTARuntimeImpl.registerResource(JTARuntimeImpl.java:191)
at weblogic.transaction.internal.ResourceDescriptor.registerMBean(ResourceDescriptor.java:1164)
at weblogic.transaction.internal.ResourceDescriptor.initXAResource(ResourceDescriptor.java:231)
at weblogic.transaction.internal.ResourceDescriptor.getOrCreate(ResourceDescriptor.java:325)
at weblogic.transaction.internal.ServerResourceInfo.<init>(ServerResourceInfo.java:173)
at weblogic.transaction.internal.ServerTransactionImpl.enlistResource(ServerTransactionImpl.java:364)
at weblogic.jdbc.jts.Driver.createLocalConnection(Driver.java:166)
at weblogic.jdbc.jts.Driver.connect(Driver.java:135)
at com.company.server.impl.generated.SecurityAdminServiceSB.hasAccessToFeature(impl/generated/SecurityAdminServiceSB.java:273)
at com.company.server.impl.generated.SecurityAdminServiceSB_tjkg0y_EOImpl.hasAccessToFeature(SecurityAdminServiceSB_tjkg0y_EOImpl.java:4833)
at com.company.servlet.LoginAPI.hasAccessToFeature(LoginAPI.java:400)
at java.lang.reflect.Method.invoke(Native Method)
at com.company.applicationServices.Dish.dishInit(Dish.java:299)
at com.company.applicationServices.Dish.<init>(Dish.java:84)
at com.company.servlet.PublicServlet.doImplementation(PublicServlet.java:241)
at com.company.servlet.PublicServlet.doGet(PublicServlet.java:137)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:740)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
at weblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubImpl.java:263)
at weblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubImpl.java:200)
at weblogic.servlet.internal.WebAppServletContext.invokeServlet(WebAppServletContext.java:2390)
at weblogic.servlet.internal.ServletRequestImpl.execute(ServletRequestImpl.java:1959)
at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:137)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:120)
--------------- nested within: ------------------
weblogic.management.ManagementException: - with nested exception:
[javax.management.InstanceAlreadyExistsException:
javelinDomain:Location=javelin,Name=JTAResourceRuntime_weblogic.jdbc.jts.Connection,ServerRuntime=javelin,Type=TransactionResourceRuntime]
at weblogic.management.runtime.RuntimeMBeanDelegate.register(RuntimeMBeanDelegate.java:96)
at weblogic.management.runtime.RuntimeMBeanDelegate.<init>(RuntimeMBeanDelegate.java:83)
at weblogic.management.runtime.RuntimeMBeanDelegate.<init>(RuntimeMBeanDelegate.java:53)
at weblogic.management.runtime.RuntimeMBeanDelegate.<init>(RuntimeMBeanDelegate.java:63)
at weblogic.transaction.internal.JTAStatisticsImpl.<init>(JTAStatisticsImpl.java:25)
at weblogic.transaction.internal.TransactionResourceRuntimeImpl.<init>(TransactionResourceRuntimeImpl.java:25)
at weblogic.transaction.internal.JTARuntimeImpl.registerResource(JTARuntimeImpl.java:191)
at weblogic.transaction.internal.ResourceDescriptor.registerMBean(ResourceDescriptor.java:1164)
at weblogic.transaction.internal.ResourceDescriptor.initXAResource(ResourceDescriptor.java:231)
at weblogic.transaction.internal.ResourceDescriptor.getOrCreate(ResourceDescriptor.java:325)
at weblogic.transaction.internal.ServerResourceInfo.<init>(ServerResourceInfo.java:173)
at weblogic.transaction.internal.ServerTransactionImpl.enlistResource(ServerTransactionImpl.java:364)
at weblogic.jdbc.jts.Driver.createLocalConnection(Driver.java:166)
at weblogic.jdbc.jts.Driver.connect(Driver.java:135)
at com.company.server.impl.generated.SecurityAdminServiceSB.hasAccessToFeature(impl/generated/SecurityAdminServiceSB.java:273)
at com.company.server.impl.generated.SecurityAdminServiceSB_tjkg0y_EOImpl.hasAccessToFeature(SecurityAdminServiceSB_tjkg0y_EOImpl.java:4833)
at com.company.servlet.LoginAPI.hasAccessToFeature(LoginAPI.java:400)
at java.lang.reflect.Method.invoke(Native Method)
at com.company.applicationServices.Dish.dishInit(Dish.java:299)
at com.company.applicationServices.Dish.<init>(Dish.java:84)
at com.company.servlet.PublicServlet.doImplementation(PublicServlet.java:241)
at com.company.servlet.PublicServlet.doGet(PublicServlet.java:137)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:740)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
at weblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubImpl.java:263)
at weblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubImpl.java:200)
at weblogic.servlet.internal.WebAppServletContext.invokeServlet(WebAppServletContext.java:2390)
at weblogic.servlet.internal.ServletRequestImpl.execute(ServletRequestImpl.java:1959)
at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:137)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:120)

Just for the benefit of anybody running into similar surprising difficulties: it is, in my case, a sniffer-problem.
For determining the client browser's java-vendor from the applet, I used an old trick that used to work pretty well. The relevant part is where the vendor is SUN, but a distinction must be made between SUN java on SUN machines and SUN-java in MSIE. This is done as follows:
     String s = System.getProperty("java.vendor");
     if (s.indexOf("Microsoft") != -1) setJavaVendor(MICROSOFT);
     else if (s.indexOf("Netscape") != -1) setJavaVendor(NETSCAPE);
     else if (s.indexOf("Sun") != -1) {
          try {
// ***> ay, there's the rub:
               getWindow().eval("window.statusbar.visible");
               setJavaVendor(SUN);
          } catch (Exception e) {
               setJavaVendor(SUNINIE);
     } else setJavaVendor(UNKNOWN);
The point is that the java-error is correctly caught (so the end result is as desired), but not the Javascript error that is generated external to the applet by the eval-command. So that is what triggers that error-popup in MSIE6, which does not have any consequences apart from being a nuisance.
Why older MSIE-versions don't seem to mind and ignore the error escapes me, and is not a very intersting question anyway. The thing is just to replace the "statusbar" test by something not involving Javascript.
One more reason to avoid using javascript for such purposes anyway is that Apple cannot make heads or tails of livewire (applets tapping into javascript).
Rik

Similar Messages

Safari Strange Errors When Loading WebPages

It is not every webpage but it is most, when i load it safari is not displaying the page correctly, includes many .gov .com websites such as www.reddit.com
Please help, below is how the page is loaded on most sites, almost like it is HTML without any graphics whatsoever???

It is not every webpage but it is most, when i load it safari is not displaying the page correctly, includes many .gov .com websites such as www.reddit.com
Please help, below is how the page is loaded on most sites, almost like it is HTML without any graphics whatsoever???

Error when loading XSLT mapping of the application

Hi,
I am using XSLT mapping in XI.
It is working ok when I test it in Interface Mapping but it gives below error when I test end to end scenario.
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
- 
- <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="">
<SAP:Category>Application</SAP:Category>
<SAP:Code area="MAPPING">TRANSFORMER_CONF_EX</SAP:Code>
<SAP:P1>com/cba/***.xsl</SAP:P1>
<SAP:P2>urn:**:**</SAP:P2>
<SAP:P3>450326d0-1559-11dd-99a1-d89c0a0a380b</SAP:P3>
<SAP:P4>-1</SAP:P4>
<SAP:AdditionalText />
<SAP:ApplicationFaultMessage namespace="" />
<SAP:Stack>Error when loading XSLT mapping of the application</SAP:Stack>
<SAP:Retry>M</SAP:Retry>
</SAP:Error>
Yes, I have activated it
Regards,
Anirudh.

hi
please assure that if you save your xslt stylesheet locally, that it is saved in UTF-8 format, before you import it.
Pls do export the imported archive as a zip file to your local disk and try opening the same. If its not then the zip file which you have uploaded might have got corrupted/is not fully uploaded.
Try activating the imported archive and do a check before you do that. This you can do with a minor change in the description or so.
reward points if found helpfull
regards
chandra.k

Error while loading application

Hi,
I'm not sure this is the right forum, but I try anyway.
I'm trying to use a 3rd party Java application Unico (just use it, I don't develop anything of that) that after working for weeks, suddenly refuses to load at startup, and returns an error like "Error while loading application" (no error code number no other hint about the problem).
The tests that did not work: 1. I installed the Unico again, 2. I created a new login and installed Unico in that login, 3. I started in safe mode (pressing shift at startup) - I always had the same message and loading aborted.
The only workaround I found is to use an external startup disk, that I fortunately had available to face cases like this: when starting the system up from that disk Unico WORKS, not only, but I can even use the same application in my internal disk that does not load otherwise.
My first conclusion is that something wrong happened to my system on the startup disk that prevents loading a Java application. The user Library seems to make no difference.
So my questions to the Java experts are:
- what in the system could suddenly block the loading of a Java application ? where should I look in the system (I can use the terminal and know something about UNIX) to fix this ? could this be caused by a permission problem ? (it looks a lot alike, but repairing permissions in Disk Utility didn't help) if so where are the Java support files stored in the Library and System Library to check and compare between the good and the bad system ?
- is there a better workaround to this problem, other than starting up from a different disk ?
Some additional info:
- the application Unico is freely provided by the Italian tax organization, so there is basically no support to use it...
- Unico requires Java 1.3.1: my system is constantly updated/upgraded and it runs the most recent release that is 1.4.0 (I guess...) and anyway worked very well till a week ago.
- since the last time the application had worked I installed two (non Apple) packages: the TomTom (GPS navigator) setup application, and new Epson printer drivers for my new printer.
- in all cases I repaired permissions and I also verified the disk with the disk utility
- Unico does not uses printers (it creates pdf files instead) and does not use USB, which in turn is used by both the Epson driver and the TomTom app.
So I cannot connect the Unico malfunctioning to this new SW except for the fact that I cannot find any other answer...
Thanks to anybody having any suggestion about
Piero

I made some research: it seems to me that most (if not all) the Java machine is in the /System/Library/Framework/JavaVM.framework folder: but I found no evident difference in the file permissions between the good and the bad system (see my previous posts).
There are other locations where there are java related files: eg in Javaconfig.plist (in /System/Library/Java) that seems to name the locations for all components of the java machine. I checked some files in /usr/bin referenced in the .plist: again no difference.
Something "could" be a clue; just before the crashing point the Unico (java) program causes a message in the Console:
"[JavaAppLauncher Warning] Specifying a specific version for JVMVersion 1.3.1 is deprecated. Use the more general 1.3* instead."
This would be a clue... except that this message appears also when the program loads without problem (in the "good" system where it works). So it is more a warning.
Another clue is the message that appears in the console in the "good" system when the Unico loads correctly; and this seems really an error message (whateve it means):
"Index 1 for 'pxm#' 2062 out of range (must be between 0 and 0)
Attempted to read past end of 'pxm#'(2062) resource"
The funny thing is that when this message appears, Unico loads with no probem, while in the "bad" system it doesn't even get to this point.
So in my opinion both messages are irrilevant to identify the problem.
Or not ?
And again my main question is: what in the system could suddenly block the loading of a Java application ?
Thanks for any hint
Piero

Design Studio Error while loading application

Since our upgrade to 1.3 we get an error when loading a specific application. Everything else is fine.
Where can we find further information? In the error log in eclipse is nothing to see.
edit: where does sap save the application-files? maybe we can find and save them...

try deleting the content of the folder below and reload the app.
C:\Users\<user ID>\Analysis-workspace\.metadata

Strange error when Bootcamp attempts to create partition for Windows

I get a strange error when I tell Bootcamp to create a partition for Windows. I get to the Create a Partition stage. I select 20GB for Windows leaving 91GB (39GB free) for OS X. I then click Partition and it gives me the following error
*The disk cannot be partitioned because some files cannot be moved.*
Back up the disk and use Disk Utility to format it as a single Mac OS Extended (Journaled) volume. Restore your information to the disk and try using Boot Camp Assistant again.
My disk is formatted in Mac OS Extended (Journaled), I have closed all applications (besides Bootcamp Assistant) and I have even restarted and tried again to see if that might help. Nothing. I can't get it to partition. Any thoughts? Can I partition my disk manually through disk utility and then select it in Bootcamp?

Hi,
this gets asked at least a thousand times by now.
Have a look at this thread for solution http://discussions.apple.com/thread.jspa?messageID=10540273&#10540273
Regards
Stefan

403 error when loading WAP

I am getting a 403 error when loading WAP from the site https://localhost:30091.
It was working and suddenly stopped. How do I troubleshoot this issue ?

Hi,
Do you use any proxy on the WAP server? If yes, please disable the proxy and try again.
Also, please check if there is any warning or error in the event viewer of the WAP server.
We can check the event of Azure Pack at Applications and Services Logs-->Microsoft-->WindowsAzurePack
Best Regards.
Steven Lee Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected]

Error 1013000 loading application: Unable to Create Request Server Thread

We are currently getting the following error "Error 1013000 loading application: Unable to Create Request Server Thread" when attempting to load more than 5 applications onto our new Essbase server. The O/S is Windows 2003 and we are running Essbase 6.5.5. Our old server, running Windows 2000, is not experiencing this problem.

I think I've found the problem! It seems the server team didn't set up the swap file, hence, when physical memory started to run a little low on the box, the thread could not be created. FYI, we had already increased the SERVERTHREADS option in the Essbase.cfg file.

ORA-00054 error when loading Oracle table using Data Services

Hello,
we are facing ORA-00054 error when loading Oracle table using BO Data services
(Oracle 10g database, BODS Xi 3.2 SP3)
Test Job performs
1- truncate table
2- load table (tested in standard and bulk load modes)
Scenario when issue happens is:
1- Run loading Job
2- Job end in error for any Oracle data base error
3- When re-running the same Job, Job fails with following error
ORA-00054: resource busy and acquire with NOWAIT specified
It seems after first failure, Oracle session for loading the table stays active and locks the table.
To be able to rerun the Job, we are forced need to kill Oracle session manually to be able to run the Job again.
Expected behaviour would be : on error rollback modifications made on table and BODS stops Oracle session in a clean way.
Can somebody tell me / or point me to any BODS best practice about Oracle error handling to prevent such case?
Thanks in advance
Paul-Marie

the ora-0054 can occure depending how the job failed before. If this occures you will need the DBA to release the lock on the table in question
Or
AL_Engine.exe on The server it creates the Lock. Need to Kill Them. Or stop it..
This Problem Occurs when we select The Bulkloading Option in orclae We also faced the same issue,Our admin has Killed the session. Then everything alright.

Error when loading data in Infopackage

Hi Friends,
I'm getting the following error when loading please help it is quite urgent.
Value 'ZSATX #1 ' (hex. '436F6E7461696E6572202331 ') of characteristic ZSIGNI contains invalid characte BRAIN
Thnaks ,

Hi Smily,
It refers to an invalid char found in this InfoObject value. Does your system have anything maintained in RSKC?
For good info you can refer to Eugene's blogs:
/people/sap.user72/blog/2006/07/08/invalid-characters-in-sap-bw-3x-myths-and-reality-part-1
/people/sap.user72/blog/2006/07/23/invalid-characters-in-sap-bw-3x-myths-and-reality-part-2
Hope this helps...

Error when loading lower case

Hi Friends,
I getting an error when loading the Infopackage ,
"Value 'sss ' (hex. '737373 ') of characteristic Zapple contains invalid characters"
I used the formula "To upper" in my T/R still I was getting the same error" and also I edited the value in PSA to "SSS" and loaded and still pointing to the same error. when I do a find for "sss" I dont see any value in PSA.
Please advice, it will be really appreciated,
thanks alot in advance

Hi,
U cont see the special characters in display mode in PSA...
for that First the check the reason for error,
it is from PSA, and the status in the monitor turned to red with errors or collection eneded with source system.. then go to manage of data target delete the red request... now go to PSA in modelling then select ur infosource right click select the option edit PSA data..
Now u can see the some special characteristics in the record that error occured... once it is complete then save come back to PSA screen then once again right click on the Infosource select immeadiate update.. it will work fine..
Siddhu

Error -5000 and: Error when loading the transcode setting

For a couple of days I've been trying to export my project on a DVD, but on the half way of the transcoding it comes the Error -5000, and then there is such a message, something about the navigation, can't be found etc... I work on a mac OS X, using Encore CS3, all my data I've got on my external harddisk, with space of 80 GB.
Besides, when I'm trying to export my project on a blu-ray disc, there comes a message: Error when loading the transcode setting! I know that there are only two codecs there - H.264 and MPEG-2, and there are only MPEG-2 movie files there, so I set the MPEG-2 codec. And there comes such a thing! Having set the H.264, there comes the same. What can it be?
And the last one is the copy protection. I know that it can be activated, with CGMS and Macrovision, only if the CSS option is set on "permit no copies". So I do, and then there comes a message - "for these settings there is no copy protection provided". So what now to do?

My flash drive PNY comes up with error -5000 and i do not know what to do can you help me with this problems

JAVAMAP-Sax Parser ...............Linkage error when loading the class.

Dear all,
Do we have any extra things to execute the Java mapping using the Sax Parser?
When I am executing the interface mapping ,I am getting the" Linkage error when loading the class" error.
Kindly let me know your personnel maildId so that I can mail you the screen shots.
Thanks,
Srinivasa

Dear sunil,
Find the File.
Source:
<MTO_FTP_MAT_DETAILS>
<MATDETAILS>
<MAKTX>
<MATNR>
<WERKS>
<LABST>
<MEINS>
<PERCNT>
TARGET
MTI_FTP_MAT_DETAILS
<MATDETAILS>
<MAKTX>
<MATNR>
<WERKS>
<LABST>
<MEINS>
<PERCNT>
Source:
<MTO_FTP_MAT_DETAILS>
<MATDETAILS>
<MAKTX>
<MATNR>
<WERKS>
<LABST>
<MEINS>
<PERCNT>
TARGET
MTI_FTP_MAT_DETAILS
<MATDETAILS>
<MAKTX>
<MATNR>
<WERKS>
<LABST>
<MEINS>
<PERCNT>
import java.io.IOException;
import java.io.InputStream;
import java.io.OutputStream;
import java.util.Map;
import javax.xml.parsers.SAXParser;
import javax.xml.parsers.SAXParserFactory;
import org.xml.sax.Attributes;
import org.xml.sax.SAXException;
import org.xml.sax.helpers.DefaultHandler;
import com.sap.aii.mapping.api.StreamTransformation;
class Echo {
public static OutputStream out;
public class myEcho extends DefaultHandler implements StreamTransformation {
private Map map;
public void setParameter(Map param) {
map = param;
public void execute(InputStream in, OutputStream out) {
DefaultHandler handler = this;
SAXParserFactory factory = SAXParserFactory.newInstance();
try {
SAXParser saxParser = factory.newSAXParser();
Echo.out = out;
saxParser.parse(in, handler);
} catch (Throwable t) {
t.printStackTrace();
public void startDocument() throws SAXException {
try {
Echo.out.write("<?xml version='1.0' encoding='UTF-8'?>".getBytes());
} catch (IOException e) {
e.notify();
public void endDocument() throws SAXException {
try {
Echo.out.flush();
} catch (IOException e) {
throw new SAXException("I/O error", e);
public void startElement(String namespaceURI, String sName, // simple name
String qName, // qualified name
Attributes attrs) throws SAXException {
String eName = sName; // element name
if ("".equals(eName))
eName = qName; // not namespace-aware
if ("ns0:MTO_SAP_MAT_DETAILS".equals(qName)) {
try {
Echo.out.write(("<MTI_FTP_MAT_DETAILS>").getBytes());
} catch (Exception e) {
e.printStackTrace();
} else {
try {
Echo.out.write(("<" + qName + ">").getBytes());
} catch (Exception e) {
e.printStackTrace();
public void endElement(String namespaceURI, String sName, // simple name
String qName // qualified name
) throws SAXException {
String eName = sName; // element name
if ("".equals(eName))
eName = qName; // not namespace-aware
if ("ns0:MTO_SAP_MAT_DETAILS".equals(qName)) {
try {
Echo.out.write(("</MTI_FTP_MAT_DETAILS>").getBytes());
} catch (Exception e) {
e.printStackTrace();
} else {
try {
Echo.out.write(("</" + qName + ">").getBytes());
} catch (Exception e) {
e.printStackTrace();
public void characters(char buf[], int offset, int len)
throws SAXException {
String s = new String(buf, offset, len);
try {
Echo.out.write(s.getBytes());
} catch (Exception e) {
e.printStackTrace();

I now get an 500 Internal Server error when loading Firefox, after updating RealPlayer

I now get an 500 Internal Server error when loading Firefox, after updating RealPlayer.
When I try to open Firefox, it opens. But there is the error message.
What is this? How do I did rid of it?
'''bold text'''

Clear the cache and the cookies from sites that cause problems.
* "Clear the Cache": Tools > Options > Advanced > Network > Offline Storage (Cache): "Clear Now"
* "Remove the Cookies" from sites causing problems: Tools > Options > Privacy > Cookies: "Show Cookies"
Start Firefox in [[Safe Mode]] to check if one of the add-ons is causing the problem (switch to the DEFAULT theme: Tools > Add-ons > Appearance/Themes).
* Don't make any changes on the Safe mode start window.
See:
* [[Troubleshooting extensions and themes]]
You can also check the connection settings in Tools > Options > Advanced : Network : Connection<br />
If you do not need to use a proxy to connect to internet then select "No Proxy"
See "Firefox connection settings":
* [[Firefox cannot load websites but other programs can]]

Report Designer - Error when Loading Report

Hi,
We have created a report in Report Designer (7.0) and saved it. When we execute it runs fine. After closing the report and trying to reopen it, the report does not open. It gives an error "Error when Loading Report". Our BI frontend patch is 14.
Did anyone encounter this issue and is there a solution to this.
Thanks
Hemant

Hello,
Please go to SE38 -> RS_REPORT_MAINTAIN,
Type your report name, and DT als "Report Type".
Goto edit mode, copy&paste this XML into txt file and send it to me ([email protected]). I will check whats going on with this report. Loading should be always possible.
Regards, Karol Kalisz, BI Development

Strange error when loading application

Similar Messages

Maybe you are looking for