Disk Utility hangs during new image

Probably a corrupted SDHC, but usually the sane cards copy fine. Last two have hung half way through although the progress bar seems active.
They both play OK in the camera so media is intact. I realise this is a bit blind but is there something I can do to check this?
Keith

Are they movies or pic's...?
I import everything into iPhoto and iMovie, then backup my Libraries to multiple external hard drives using CarbonCopyCloner.
If I just wanted to copy files from one SD card to another. I would either drag n drop copy the files to my desktop and then copy them to the new card. Or get a second USB external card reader and simply drag n drop copy the files from one card to the other.
If I only wanted to backup the SD cards and not move the files to my Mac, I would simply drag n drop the media files from the SD cards to an external hard drive.

Similar Messages

Can Disk Utility make a "New Image" from a desktop copy of a DVD?

I have not been able to get Disk Utility to make "new images" of a couple of DVDs. For one of the DVDs, it may have something to do with a hyphen in the title. I haven't a clue why I'm failing with the second of the two DVDs. (Previously, I've had no trouble with about a dozen DVDs so far.)
Several members of this discussion group recommended me to copy&paste or drag&drop the files from a DVD to a new folder (say on the desktop), and then to drag the resulting new folder into the box in Disk Utility, and then to make a disk image using Disk Utility.
(Note: While I believe the original DVDs are not encrypted, I ran an experiment to make double sure, by using MacTheRipper first to produce folders containing clean files.)
However, when I drag the new folder into the box in Disk Utility, and let go of the mouse button, then the folder does not stay in Disk Utility window, but instead springs back to the desktop.
How can I get Disk Utility to make new images from the new desktop folders?
Note:
As a partially successsful work around:
For one of the two original DVDs - which has only about 3.7GB on it - I can sometimes (only sometimes) succeed in doing without Disk Utility simply by dragging the audio and video files from the new desktop folder onto a blank DVD, and then burning that DVD. However, in an average of about two out of every three attempts so far, my Mac rejects the new disk as unusable during the burn process.
For the other original DVD - which has about 4.36GB on it - the contents of the new desktop folder won't fit onto a blank DVD. It then gets messy - shrinking the files - so I'd like to avoid all of that by getting DIsk Utility to work properly.

For the answer, see the following excerpt from my own posting dated 2 May 2006, i.e.:
"I finally found out for myself (from Disk Utility Help) that to make a new image from a file/folder, rather than dragging the folder to the Disk Utility pane, in the top menu bar in Disk Utility you select Images/New/Image from Folder."

Disk utility hangs during disk verify

Initially 'disk verify' registered errors on exit - minor error/issue it said,some kind of header problem, so I ran disk utility off the install disk. Now the machine's native version of disk utility hangs during disk verify, blue & white spirals forever.
This coincidentally straight after my gmail/google address/account was hacked a couple of days ago.

Have you tried booting in SafeBoot mode (shift key held on start
until login screen appears) then launch Disk Utility and then run
its 'repair disk permissions' item, selecting the Macintosh HD;
and then note the repair window. It should fix something.
And when Disk Utility is done, quit it, and restart the Mac normally.
{...It is unlikely something from gmail affected your computer unless
you open up unknown sourced emails or go to odd web sites where
something may be downloaded from there, which you would almost
have to install (as admin, etc) for malware to work. You can get and
try ClamXAV for free to see if it sees any malware virus content.}
If you use Gmail, and do not log in using the https:// (secure http)
you should change the habit and bookmark the secure login site.
And when booted from the Installer disk and running Disk Utility
from there, see about running "repair disk" and not verify. The
repair choice will verify; but verify will not repair. Could be if
you cannot use the Utility to Repair the issues, and the other
SafeBoot mode and the computer's Disk Utility to get it working
you may need to further troubleshoot and/or get third-party tools.
In any event...
Good luck & happy computing!

Disk Utility Hangs during format

Yes, I've seen a hundred other posts on this but all have been archived with no solution.
It seems very likely there is a 10.4 problem. When I try to format a 160GB drive connected via USB Disk Utility hangs and never completes. I have tried to partition it as well with no luck.
Is there a fix? Is Apple working on the problem? Is there a workaround? Even a commandline fix would be acceptable.

This is ridiculous. I have tried 4 different physical drives in 4 different physical enclosures (3 different brands) and it still hangs Disk Utility.
I know I'm not the only one with this problem. What the **** is going on? I can't format a disk and therefore I can't use it. This is absolutely unacceptable.
Sometimes my machine hangs in such a way that I can't even reboot it, it requires a physical power down.
I have been forced to format these on a Windows machine with FAT32 (using a 3rd party app to get past the GB limitation MS sets). I don't want FAT32, I want HFS+. But I can find no other way to do this in Tiger as it ALWAYS hangs regardless of drive, enclosure, filesystem type, size, number of partitions, etc, etc.
Is OS X truly this bad that it can't even format a drive properly? Am I really going to have to rely on Windows and FAT32 whenever I want to format?

Using disk utility to burn new image dvd's

Ok I just learned to burn DVD'd using Disk Utility and New image.
But I have come to halt in my burning with a new issue.
My issue is that I have a file that is 4.63GB. When I make a new image so that I can burn it, it increases the size of the file(Video TS) to 5.13GB. Making it to big for a 4.7GB DVD.
My question is is this normal for the new image file to increase in size, and is there a way for me to stop this from happening. Or can anyone give me any other suggestions. Please help.

Ok I have never tried that, as this is the first time it is suggested to me.
The reason i have been doing it via DU, is because this has been to only way to get it to play on
home DVD player and burn with the UDF setting. I was told to do it this way when I was trying to burn
copies of my nieces fifteens that was prof. done on a DVD.
I am trying to burn a copy of a movie so that it can be played on home dvd players. Yes I have done this before and the copies I burned via DU/new image, worked perfectly. And the ones I burned by just choosing file and burning it did not work.
So any help would be great.

Disk Utility hangs during DMG file creation

I use disk utility to create DMG files from folders (with the corresponding command from the File -> New menu). Every now and then (and quite often, really), Disk Utility will not complete this process, but instead hang forever. It seems that something in the kernel gets stuck, because the machine can get increasingly unresponsive after the hang has started (for instance, I wanted to look in the system log right now, but running less on /var/log/system.log would create long hangs on the whole UI). The only way out is a reboot.
The machine is otherwise very stable.
(Ah, and Time Machine started at the same time now, and doesn't seem to be able to run - maybe disk utility and time machine are creating some deadlock situation?)
Anyone who has seen similar behaviour?

I haven't had this issue this since upgrading to Snow Leopard, so I assume it has been fixed.

Boot Camp Assistant / Disk Utility Stuck during Partitioning

Hello Apple / Apple customers,
I have a 15" MacBook Pro (Mid-2010) with a 320GB hard drive. I recently partitioned my hard drive to install Windows 7 in order to install and play a Windows game. Everything installed fine, but I discovered that I didn't have enough space partitioned to fit the game (I did not anticipate it taking 14 GB to install). So I deleted the partition. Now I'm attempting to make a larger partition and restore a Winclone image that I made of the previous partition on that new partition. The problem I am receiving occurs when I attempt to make a new partition in both Boot Camp Assistant and Disk Utility. During the partitioning process, Boot Camp Assistant stalls at about 30% and stays that way for hours, and Disk Utility also stalls during the "shrinking disk" part at about 30% as well. Is there anyway that I can fix this? I already tried repairing my hard drive by running Disk Utility via the Installation Disc, and it says that my hard drive is fine. Thanks in advance for the help.

Reinstall Leopard, but first use the Leopard install DVD Disk Utility to reformat the HD to one partition. See:
http://docs.info.apple.com/article.html?path=Mac/10.4/en/mh14.html
It's for Tiger, but applies for Leopard as well.
WARNING, you must have your data saved somewhere else.
Message was edited by: xnav

Disk Utility hangs ("not responding") when attempting to Repair Disk on Time Capsule sparsebundle. Help.

I am trying to improve the performance of my Time Machine backup and retrievals via my 2nd Gen. Time Capsule from my iMac Core 2 Duo hard drive with SL 10.6.8. The incremental backups generally take 20 - 40 minutes each hour generally with fewer than 100 MB of data being backed up. I have read through numerous threads on these forums about Time Capsule and Time Machine issues as well as the very helpful Pondini site (http://web.me.com/pondini/Time_Machine/Home.html) and have tried many other suggestions (listed below), but have been unable to attempt a Disk Utility repair disk on the Time Capsule sparsebundle file.
After locating the sparsebundle 'file' in the finder under Shared/TC/Data, I am only sometimes able to drag the sparsebundle into the Disk Utility volumes and disk window. About fifty percent of the time, Disk Utility hangs when attempting to drag in the sparsebundle. If I am able to get it listed and click on "repair disk", then the beach ball begins to spin and nothing happens. This occurs whether or not I first use AirPort Utility to "Disconnect All Users" from the Time Capsule. I have given it over one hour to attempt the repair disk, but nothing happens, i.e., not a single message shows up in the detail window. The beach ball just spins, and Disk Utility shows up in red as "not responding" under the Force Quit menu.
Also note that on my new Macbook Air, Time Machine runs quite quickly via this same Time Capsule from my new Macbook Air using OS X Lion (which seems to indicate that the Time Capsule drive itself is OK).
I would appreciate any tips on getting Disk Utility to run "repair disk" on my sparsebundle, as I seem to have exhausted most other options (see below) for improving Time Capsule performance -- aside of course, from wiping the Time Capsule clean and starting all over.... (which I really don't want to do, and from what I've read, has not helped some people who've tried this anyway).
Many thanks!
Although I would like to focus this thread on the Disk Utility / sparsebundle "Repair Disk" problem, I should mention that I have tried the following other things:
1. Repaired disk permissions on my hard drive
2. Used Disk Utility to run "repair disk" on my hard drive after starting up from a SuperDuper external backup
3. Run DiskWarrior on my hard drive, again, from a separate startup disk
4. Did the "full reset of Time Machine", a la Pondini Troubleshooting #A4
5. Changed my computer and Time Capsule names to simple short names with only alphanumeric characters and no spaces
6. Ensured that my Time Capsule is being accessed only via ethernet
7. Relaunched the finder
8. And finally, attempting to use Disk Utility to repair the sparsebundle - thus the nature of this post

OK, no takers out there, but I answered my own question (sort of).
The answer is that even though Disk Utility shows up as "not responding" under the Force Quit menu and appears to hang, it is actually still working. A bit of patience shows that after about an hour, my Disk Utility was able to show the 1.44 TB Time Machine sparsebundle from Time Capsule in the disk window on the left hand side. Once this appeared, I was able to click on "Repair Disk" (note that prior to doing this, I had to "Disconnect All Users" from my Time Capsule using the Airport Utility program; otherwise you will get a "could not unmount disk" error). Again, the Repair Disk function appeared to hang Disk Utility as it showed up as "not responding" under the Force Quit menu. However, after about 8 hours, Disk Utility did run the entire Repair Disk protocol on the sparsebundle. The results DO NOT show up in the Disk Utility details window - so even if you are patient enough to let it complete, you will not see anything and may think that nothing happened. However, you can find the familiar results of the Repair Disk function by looking on Console - find the "DiskUtility.log" under Files: ˜/Library/Logs.
Unfortunately, I was hoping to find a problem that would have been subsequently repaired which would result in dramatically increased Time Capsule speed, but this was not the case. Disk Utility showed everything to be "OK" and I am stuck with a very slow Time Capsule....
(And of note, my new Macbook Air (OS Lion) Time Machine functions blazingly fast on both backup and retrieval to and from the very same Time Capsule - even though, these are occuring wirelessly via AirPort -- granted the size of this sparsebundle is an order of magnitude smaller at this point, i.e., only 10 GB right now)
Would still be happy to hear of any similar experiences or tips on getting Time Capsule to work more quickly.

Disk Utility hangs when erasing external disk

In Time Machine I wasn't able to figure out how to attach an external drive via USB. I guessed that it probably wouldn't work on a MS-DOS filesystem, so I started Disk Utility, which I never have used before. I have formatted disks before on Linux and on Windows, so it's nice to see a great app for this.
In the Time Machine brief help text, there is not mentioned what kind of filesystem that is required or if it work with any filesystem. So I searched, and it seems as if HFS+ journaled case-insensitive is the filesystem that one should choose. Can anyone confirm this?
When I click erase then the Disk Utility program hangs and I see the spinning beachball. The Activity Monitor program shows that disk activity stops after a few seconds. There is no more activity, so after 5 minutes I stop the program.
I have tried several times, and I see the same behavior. I even tried restarting the computer. But no luck.
Now my external disk no longer shows that it's a MS-DOS filesystem, but shows that it's HFS+ journaled case-insensitive. Probably not ok so far. I try creating a single patition, with format: HFS+ journaled case-insensitive, without OS 9 drivers installed. When I click apply then spinning beachball again and diskactivity stops after a few seconds, and I stop the program after some minutes where it has been inactive.
My guess is that the disk-erasing task failed and has left the disk in a broken state. During this task Disk Utility began to hang for a reason that I don't know.
My second guess to why the create-partition task failed, is that the disk is in a broken state, and thus the partition cannot be created, and Disk Utility hangs.
How do I format the external disk from the command line?

In Disk Utility, select the drive mechanism (not the volume on it) and click the Partition button. Use the Options button to choose the GUID partition scheme, then make one HFS+ (Journaled) volume.
There is no point in using the command line for this task, because if Disk Utility cannot deal properly with the disk, Mac OS X will not either. Disk Utility is using diskutil to do the partitioning and formatting.

Disk Warrior/Disk Utility Hangs with External HD

okay, so i will try to make this as quick as possible.
last year, i had an external hard drive that i had been saving all my audio work on. one day i had to restart (i was having a lot of problems with my then IBook G4) so i did, and the drive was no where to be found. made sure there was no connection problems (ie my USB ports) and everything seemed fine. let it sit for a while, thinking maybe it was just tired or something. tried again, same story, and it also made disk utility hang. tried it on a friends mac, same issue.
i also had a a lot of video/music that i watched with my xbox 360. i could still access those files with the xbox, which was weird.
so then my ibook eventually died, and here i am with a newer G5 quad. i tried it again, and still the disk utility hangs, and ive also tried Disk warrior 4. this also hangs.
also, i have tried switching the enclosure to no avail.
its not the end of the world if i cant get the data back, but i would REALLY like to.
any suggestions?

System Profiler shows the same thing: "Manufacturer: PI-236" for each of these HDs. I'm not sure how to rename these drives (I'm not talking about the partitions on them, which I've given descriptive names).
The strange thing is that on my MacBook Air (upgraded to Lion) one of these HDs (now connected via USB) shows up in Disk Utility as "Ext Hard Disk Media" instead of "PI-236". Still not a whole lot of information, you'll notice.
Another external HD (partitioned earlier under Snow Leopard) is shown correctly as "SAMSUNG HD501LJ Media" on both computers.

Disk Utility hanging on all user accounts

Hi,
I suspect that my son applied new permissions to enclosed items somewhere and that this is the reason that Disk Utility hangs (doesn't respond) when I start it. As a remedy I repaired permissions while started from an external disk and then applied some command lines that I learned for resetting user account permission (http://discussions.apple.com/thread.jspa?threadID=1655174&tstart=0). But still DU is unresponsive and must be force quit. Additionally I cannot open the DVD tray and Firefox tells me "...update available but you do not have the systems permissions required to install it....".
So I think my user permissions reset was not successful. My question is: did the command line language change from Leopard to SnowLeopard because Terminal gave me some feedback that "-H makes sense only with R" or something to that effect.
Do you have any idea about these things? What's the best way to proceed? Thanks.

Has command line language changed in SnowLeo compared to Leopard?
There are a few changes that reflect the differences between the two OS versions but the vast majority of commands are the same. There are hundreds of commands. Including the flags, switches, & options available for them there are thousands of variations. Plus, characters like spaces, slashes, dashes, & quote marks have special meaning depending on where they appear in the command line so even a minor typo can dramatically change a command into something other than what you want.
Because of this, you should not use a command unless it is specifically recommended for an issue you have explained completely or you have at least a fundamental understanding of command line syntax & the options for a command you are going to use. Each command has a manual page ("man page" for short) that you can access in Terminal by typing the word "man" followed by a space followed by the command name. For example, try "man man" to see the manual page explaining that command.
It would help greatly if you could provide the exact command & flags you used, plus any error messages they generated. Also, "standard procedures" doesn't tell us much since different users consider different things standard.
I suspect your problem is not caused by mis-set permissions, although they may have lead to the condition that caused it. But without more info it is hard to say what the problem is or how to fix it. It might be simplest just to reinstall the OS (which for Snow Leopard is not that big a deal), let Software Update bring it up to current versions, & then deal with any remaining user level permission issues separately.

Disk Utility Hang

I am trying to diagnose a problem with my Time Capsule and whenever I load Disk Utility when my backup image is loaded, the program hangs and I have to force quit. I can open the image with Disk Warrior, but for some reason there is a problem opening with DU. Here is the error log (the beginning at least):
Date/Time: 2011-01-11 03:47:37 -0500
OS Version: 10.6.5 (Build 10H574)
Architecture: x86_64
Report Version: 6
Command: Disk Utility
Path: /Applications/Utilities/Disk Utility.app/Contents/MacOS/Disk Utility
Version: 11.5.2 (298.4)
Build Version: 27
Project Name: DiskUtility
Source Version: 2980400
Parent: launchd [180]
PID: 1178
Event: hang
Duration: 4.74s (sampling started after 2 seconds)
Steps: 27 (100ms sampling interval)
Pageins: 13
Pageouts: 0
Process: Disk Utility [1178]
Path: /Applications/Utilities/Disk Utility.app/Contents/MacOS/Disk Utility
UID: 501
Need anymore info?

The disk has some serious problems that Disk Utility cannot fix or get past. You need to stop using that Mac immediately and get yourself a copy of DiskWarrior to repair that drive.
Mulder
If this answered you question, please consider awarding some points. Why Reward Points?
iMac G4 700Mhz Mac OS X (10.3.9)

Disk utility hangs MAC G4?

Why does Disk Utility hang when starting? ~ Doug

Hi, Doug.
A little more detail on how you are launching Disk Utility on the stated "G4" would help. Some more details about the specific G4, and the problems that may have led to you attempting to run Disk Utility on it would also be useful.
Try running steps 1-2 of the Procedure specified in my "Resolving Disk, Permission, and Cache Corruption" FAQ.
Good luck!
Dr. Smoke
Author: Troubleshooting Mac® OS X
Note: The information provided in the link(s) above is freely available. However, because I own The X Lab™, a commercial Web site to which some of these links point, the Apple Discussions Terms of Use require I include the following disclosure statement with this post:
I may receive some form of compensation, financial or otherwise, from my recommendation or link.

Disk Utility hangs up

Running a G5 IMac with 10.5.1. Tried to repair permissions and Disk Utility hangs up at about 25% of the way through the process. Ran Disk Warrior. Still hangs up. Started up form Leopard Install and tried to repair permissions. Still hangs up. Otherwise the system seems to be running OK. Any help or thoughts would be appreciated.

Disk Warrior is NOT compatible with Leopard at this time.
I would not use my Disk Warrior.
Permissions take from 10 to 30 minutes with 10.5.1
Give it time.
It seems like it just sits there on "Less than 1 minute" but it will eventually finish.
Again, give it time.

Disk Utility hangs attempting to erase SimpleTech 100gb external USB disk

I'm attempting to erase and format a SimpleTech 100gb external USB disk. Disk Utility hangs. The system error log says:
"AppleUSBEHCI[0x1d59000]::Found a transaction past the completion deadline on bus 91, timing out!
Jul 21 17:30:35 Kari-Hohnbaums-Computer-2 kernel[0]: USBF:"
The console log (and Disk Utility log) shows:
Preparing to erase : “PBEX1”
Creating Partition Map
error writing partition map: Device not configured (6)
Disk Erase failed with the error:
What is the problem? This disk is recognized by Tiger but only as read-only as it ships as an NTFS volume and must be erased and reformatted before it can be used by a MAC.
All help appreciated.

I tried the partition approach and it unfortunately failed as well. The same "hung" symptoms as before. The green light (disk activity) on the disk flashed several times at the initial request, but that was all. I eventually interrupted it after a hourn which generated the same system log message: AppleUSBEHCI[0x1d59000]::Found a transaction past the completion deadline on bus 91, timing out!
The disk utility log says:
Preparing to partition disk: “SAMSUNG HM100JC Media”
Partition Scheme: Apple Partition Scheme
Mac OS 9 Disk Drivers installed
1 partitions will be created
Partition 1
Name : “PBEX1”
Size : 93.2 GB
Filesystem : Mac OS Extended (Journaled)
Creating Partition Map
Partition failed for disk SAMSUNG HM100JC Media Device not configured
Partition complete.
I don't have easy access to a Window's box. I do have access to a Linux system. Perhaps I can configure it there and it will work on my PB.

Disk Utility hangs during new image

Similar Messages

Maybe you are looking for