Dispatcher running but not connected to message server :( please help .
trc file: "dev_disp", trc level: 1, release: "700"
sysno 00
sid DEV
systemid 562 (PC with Windows NT)
relno 7000
patchlevel 0
patchno 144
intno 20050900
make: multithreaded, Unicode, 64 bit, optimized
pid 3744
Mon Oct 26 12:37:38 2009
kernel runs with dp version 232000(ext=109000) (@(#) DPLIB-INT-VERSION-232000-UC)
length of sys_adm_ext is 576 bytes
SWITCH TRC-HIDE on ***
***LOG Q00=> DpSapEnvInit, DPStart (00 3744) [dpxxdisp.c 1243]
shared lib "dw_xml.dll" version 144 successfully loaded
shared lib "dw_xtc.dll" version 144 successfully loaded
shared lib "dw_stl.dll" version 144 successfully loaded
shared lib "dw_gui.dll" version 144 successfully loaded
shared lib "dw_mdm.dll" version 144 successfully loaded
rdisp/softcancel_sequence : -> 0,5,-1
use internal message server connection to port 3900
Mon Oct 26 12:37:50 2009
WARNING => DpNetCheck: NiHostToAddr(www.doesnotexist0211.qqq.nxst) took 12 seconds
Mon Oct 26 12:38:06 2009
WARNING => DpNetCheck: NiAddrToHost(1.0.0.0) took 16 seconds
***LOG GZZ=> 2 possible network problems detected - check tracefile and adjust the DNS settings [dpxxtool2.c 5371]
MtxInit: 30000 0 0
DpSysAdmExtInit: ABAP is active
DpSysAdmExtInit: VMC (JAVA VM in WP) is not active
DpIPCInit2: start server >noptqas_DEV_00 <
DpShMCreate: sizeof(wp_adm) 25168 (1480)
DpShMCreate: sizeof(tm_adm) 5652128 (28120)
DpShMCreate: sizeof(wp_ca_adm) 24000 (80)
DpShMCreate: sizeof(appc_ca_adm) 8000 (80)
DpCommTableSize: max/headSize/ftSize/tableSize=500/16/552064/552080
DpShMCreate: sizeof(comm_adm) 552080 (1088)
DpSlockTableSize: max/headSize/ftSize/fiSize/tableSize=0/0/0/0/0
DpShMCreate: sizeof(slock_adm) 0 (104)
DpFileTableSize: max/headSize/ftSize/tableSize=0/0/0/0
DpShMCreate: sizeof(file_adm) 0 (72)
DpShMCreate: sizeof(vmc_adm) 0 (1864)
DpShMCreate: sizeof(wall_adm) (41664/36752/64/192)
DpShMCreate: sizeof(gw_adm) 48
DpShMCreate: SHM_DP_ADM_KEY (addr: 000000000EE70050, size: 6348592)
DpShMCreate: allocated sys_adm at 000000000EE70050
DpShMCreate: allocated wp_adm at 000000000EE72150
DpShMCreate: allocated tm_adm_list at 000000000EE783A0
DpShMCreate: allocated tm_adm at 000000000EE78400
DpShMCreate: allocated wp_ca_adm at 000000000F3DC2A0
DpShMCreate: allocated appc_ca_adm at 000000000F3E2060
DpShMCreate: allocated comm_adm at 000000000F3E3FA0
DpShMCreate: system runs without slock table
DpShMCreate: system runs without file table
DpShMCreate: allocated vmc_adm_list at 000000000F46AC30
DpShMCreate: allocated gw_adm at 000000000F46ACB0
DpShMCreate: system runs without vmc_adm
DpShMCreate: allocated ca_info at 000000000F46ACE0
DpShMCreate: allocated wall_adm at 000000000F46ACF0
MBUF state OFF
DpCommInitTable: init table for 500 entries
ThTaskStatus: rdisp/reset_online_during_debug 0
EmInit: MmSetImplementation( 2 ).
MM global diagnostic options set: 0
<ES> client 0 initializing ....
<ES> InitFreeList
<ES> block size is 4096 kByte.
<ES> Info: em/initial_size_MB( 16383MB) not multiple of em/blocksize_KB( 4096KB)
<ES> Info: em/initial_size_MB rounded up to 16384MB
Using implementation view
<EsNT> Using memory model view.
<EsNT> Memory Reset disabled as NT default
<ES> 4095 blocks reserved for free list.
ES initialized.
rdisp/http_min_wait_dia_wp : 1 -> 1
***LOG CPS=> DpLoopInit, ICU ( 3.0 3.0 4.0.1) [dpxxdisp.c 1633]
Mon Oct 26 12:38:07 2009
***LOG Q0K=> DpMsAttach, mscon ( noptqas) [dpxxdisp.c 11822]
DpStartStopMsg: send start message (myname is >noptqas_DEV_00 <)
DpStartStopMsg: start msg sent
CCMS: AlInitGlobals : alert/use_sema_lock = TRUE.
CCMS: start to initalize 3.X shared alert area (first segment).
DpMsgAdmin: Set release to 7000, patchlevel 0
MBUF state PREPARED
MBUF component UP
DpMBufHwIdSet: set Hardware-ID
***LOG Q1C=> DpMBufHwIdSet [dpxxmbuf.c 1050]
DpMsgAdmin: Set patchno for this platform to 144
Release check o.K.
Mon Oct 26 12:38:47 2009
ERROR => DpHdlDeadWp: W0 (pid 276) died [dpxxdisp.c 14532]
ERROR => DpHdlDeadWp: W1 (pid 5532) died [dpxxdisp.c 14532]
ERROR => DpHdlDeadWp: W2 (pid 3696) died [dpxxdisp.c 14532]
ERROR => DpHdlDeadWp: W3 (pid 4928) died [dpxxdisp.c 14532]
ERROR => DpHdlDeadWp: W4 (pid 6040) died [dpxxdisp.c 14532]
ERROR => DpHdlDeadWp: W5 (pid 3892) died [dpxxdisp.c 14532]
ERROR => DpHdlDeadWp: W6 (pid 3860) died [dpxxdisp.c 14532]
ERROR => DpHdlDeadWp: W7 (pid 4564) died [dpxxdisp.c 14532]
ERROR => DpHdlDeadWp: W8 (pid 3940) died [dpxxdisp.c 14532]
ERROR => DpHdlDeadWp: W9 (pid 3288) died [dpxxdisp.c 14532]
my types changed after wp death/restart 0xbf --> 0xbe
ERROR => DpHdlDeadWp: W10 (pid 5136) died [dpxxdisp.c 14532]
my types changed after wp death/restart 0xbe --> 0xbc
ERROR => DpHdlDeadWp: W11 (pid 5128) died [dpxxdisp.c 14532]
my types changed after wp death/restart 0xbc --> 0xb8
ERROR => DpHdlDeadWp: W12 (pid 4452) died [dpxxdisp.c 14532]
ERROR => DpHdlDeadWp: W13 (pid 4680) died [dpxxdisp.c 14532]
ERROR => DpHdlDeadWp: W14 (pid 5664) died [dpxxdisp.c 14532]
my types changed after wp death/restart 0xb8 --> 0xb0
ERROR => DpHdlDeadWp: W15 (pid 5540) died [dpxxdisp.c 14532]
my types changed after wp death/restart 0xb0 --> 0xa0
ERROR => DpHdlDeadWp: W16 (pid 4312) died [dpxxdisp.c 14532]
my types changed after wp death/restart 0xa0 --> 0x80
DP_FATAL_ERROR => DpWPCheck: no more work processes
DISPATCHER EMERGENCY SHUTDOWN ***
increase tracelevel of WPs
NiWait: sleep (10000ms) ...
NiISelect: timeout 10000ms
NiISelect: maximum fd=309
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Mon Oct 26 12:38:57 2009
NiISelect: TIMEOUT occured (10000ms)
dump system status
Workprocess Table (long) Mon Oct 26 07:08:57 2009
========================
No Ty. Pid Status Cause Start Err Sem CPU Time Program Cl User Action Table
0 DIA 276 Ended no 1 0 0
1 DIA 5532 Ended no 1 0 0
2 DIA 3696 Ended no 1 0 0
3 DIA 4928 Ended no 1 0 0
4 DIA 6040 Ended no 1 0 0
5 DIA 3892 Ended no 1 0 0
6 DIA 3860 Ended no 1 0 0
7 DIA 4564 Ended no 1 0 0
8 DIA 3940 Ended no 1 0 0
9 DIA 3288 Ended no 1 0 0
10 UPD 5136 Ended no 1 0 0
11 ENQ 5128 Ended no 1 0 0
12 BTC 4452 Ended no 1 0 0
13 BTC 4680 Ended no 1 0 0
14 BTC 5664 Ended no 1 0 0
15 SPO 5540 Ended no 1 0 0
16 UP2 4312 Ended no 1 0 0
Dispatcher Queue Statistics Mon Oct 26 07:08:57 2009
===========================
SiSelNRemove: removed sock 196 (pos=2)
SiSelNRemove: removed sock 196
NiSelIRemove: removed hdl 2
MBUF state OFF
AdGetSelfIdentRecord: > <
AdCvtRecToExt: opcode 60 (AD_SELFIDENT), ser 0, ex 0, errno 0
AdCvtRecToExt: opcode 40 (AD_MSBUF), ser 0, ex 0, errno 0
AdCvtRecToExt: opcode 40 (AD_MSBUF), ser 0, ex 0, errno 0
blks_in_queue/wp_ca_blk_no/wp_max_no = 1/300/17
LOCK WP ca_blk 1
make DISP owner of wp_ca_blk 1
DpRqPutIntoQueue: put request into queue (reqtype 1, prio LOW, rq_id 15)
MBUF component DOWN
NiICloseHandle: shutdown and close hdl 2 / sock 196
NiBufIClose: clear extension for hdl 2
MsIDetach: detach MS-system
cleanup EM
EsCleanup ....
EmCleanup() -> 0
Es2Cleanup: Cleanup ES2
***LOG Q05=> DpHalt, DPStop ( 3744) [dpxxdisp.c 10421]
Good Bye .....
Thanks in advance
Shakeel.
Please check this forums subject. It is SAP Business One System Administration - dedicate to SAP Business One System only.
Close your thread and post to a proper forum. To make other members read your message easily, at least some line breaks are needed in your message.
Thanks,
Gordon
Similar Messages
-
SAP MMC Says Dispatcher running but not connected to message server
I installed the ABAP Stack Sneak Preview Netweaver.I see all the relevant NSP entries in my Services file.But when i disconnect my internet I see in SAP MMC that Disptacher says its running but not connected Message Server(turns yellow) and also the SAP gets logged off. Is Internet connection required for running NSP(ABAP System SID)??
If I want to get rid of this internet dependency what settings i need to change ??
My current Message trace file says as follows..
Trace File of Message Server
trc file: "dev_ms", trc level: 1, release: "640"
[Thr 4516] Mon Sep 26 21:51:06 2005
[Thr 4516] systemid 560 (PC with Windows NT)
[Thr 4516] relno 6400
[Thr 4516] patchlevel 0
[Thr 4516] patchno 43
[Thr 4516] intno 20020600
[Thr 4516] pid 4512
[Thr 4516] ***LOG Q01=> MsSInit, MSStart (Msg Server 1 4512) [msxxserv.c 1661]
[Thr 4516] Mon Sep 26 21:51:07 2005
[Thr 4516] MsHttpInit: full qualified hostname = sai
[Thr 4516] HTTP logging is switch off
[Thr 4516] set HTTP state to LISTEN
[Thr 4516] *** I listen to port sapmsNSP (3600) ***
[Thr 4516] *** HTTP port 8100 state LISTEN ***
[Thr 4516] CUSTOMER KEY: >K0201639721<
[Thr 4516] Mon Sep 26 21:52:46 2005
[Thr 4516] MsHttpReadUrl: H-1 url = /sap/public/icf_info/urlprefix (403 Forbidden)
[Thr 4516] Mon Sep 26 21:52:50 2005
[Thr 4516] MsHttpReadUrl: H-1 url = /sap/public/icf_info/logon_groups (403 Forbidden)
Looking for your valuable solutions.. Will definitely reward good points if gets solved
Thanks
Sreeni.There is now also a Weblog about https://weblogs.sdn.sap.com/pub/wlg/2479 [original link is broken] [original link is broken] [original link is broken] [original link is broken] [original link is broken] [original link is broken] [original link is broken] [original link is broken] [original link is broken] [original link is broken].
Regards
Gregor -
Dispatcher running but not connecd to message server
hi..
iam trying to start my server, in process list iam getting dispatcher is not getting start.first iam getting 'DISPATCHER IS RUNNING BUT NOT CONNETED TO MESSAGE SERVER' it is in yellow color, after some time , it is changing to green color but the message is ' MESSAGE SERVER IS OK BUT DIALOG QUEUE IS STAND STILL' afere some time its getting stop.
can any one help me pls what is the problem?thanku for your advise..
ok.. the following the are developer traces for 0,1,2.
0.
trc file: "dev_w0", trc level: 1, release: "620"
ACTIVE TRACE LEVEL 1
ACTIVE TRACE COMPONENTS all, M
B
B Wed Jul 11 16:54:32 2007
B create_con (con_name=R/3)
B Loading DB library 'C:\usr\sap\DEV\SYS\exe\run\dboraslib.dll' ...
M *** ERROR => DlLoadLib: LoadLibrary(C:\usr\sap\DEV\SYS\exe\run\dboraslib.dll) Error 126 [dlnt.c 226]
M Error 126 = "The specified module could not be found."
B *** ERROR => Couldn't load library 'C:\usr\sap\DEV\SYS\exe\run\dboraslib.dll'
[dbcon.c 3789]
M systemid 560 (PC with Windows NT)
M relno 6200
M patchlevel 0
M patchno 251
M intno 20020600
M pid 4872
M
M ***LOG Q0Q=> tskh_init, WPStart (Workproc 0 4872) [dpxxdisp.c 1016]
I MtxInit: -2 0 0
X
X Wed Jul 11 16:54:33 2007
X EmInit: MmSetImplementation( 2 ).
X <ES> client 0 initializing ....
X Using implementation std
M <EsNT> Memory Reset enabled as NT default
X ES initialized.
M
M Wed Jul 11 16:54:39 2007
M calling db_connect ...
B create_con (con_name=R/3)
B Loading DB library 'C:\usr\sap\DEV\SYS\exe\run\dboraslib.dll' ...
M *** ERROR => DlLoadLib: LoadLibrary(C:\usr\sap\DEV\SYS\exe\run\dboraslib.dll) Error 126 [dlnt.c 226]
M Error 126 = "The specified module could not be found."
B *** ERROR => Couldn't load library 'C:\usr\sap\DEV\SYS\exe\run\dboraslib.dll'
[dbcon.c 3789]
M ***LOG R19=> tskh_init, db_connect ( DB-Connect 008192) [thxxhead.c 1098]
M in_ThErrHandle: 1
M *** ERROR => tskh_init: db_connect (step 1, th_errno 13, action 3, level 1) [thxxhead.c 8277]
M
M Info for wp 0
M
M stat = 4
M reqtype = 1
M act_reqtype = -1
M tid = -1
M mode = 255
M len = -1
M rq_id = -1
M rq_source = 255
M last_tid = 0
M last_mode = 0
M rfc_req = 0
M report = > <
M action = 0
M tab_name = > <
M
M *****************************************************************************
M *
M * LOCATION SAP-Server pandu_DEV_00 on host pandu (wp 0)
M * ERROR tskh_init: db_connect
M *
M * TIME Wed Jul 11 16:54:39 2007
M * RELEASE 620
M * COMPONENT Taskhandler
M * VERSION 1
M * RC 13
M * MODULE thxxhead.c
M * LINE 8408
M * COUNTER 1
M *
M *****************************************************************************
M
M Entering TH_CALLHOOKS
M ThCallHooks: call hook >SAP-Trace buffer write< for event BEFORE_DUMP
M ThCallHooks: call hook >ThrSaveSPAFields< for event BEFORE_DUMP
M *** ERROR => ThrSaveSPAFields: no valid thr_wpadm [thxxrun1.c 672]
M *** ERROR => ThCallHooks: event handler ThrSaveSPAFields for event BEFORE_DUMP failed [thxxtool3.c 235]
M Entering ThSetStatError
M Entering ThReadDetachMode
M call ThrShutDown (1)...
M ***LOG Q02=> wp_halt, WPStop (Workproc 0 4872) [dpnttool.c 345]
1.
trc file: "dev_w1", trc level: 1, release: "620"
ACTIVE TRACE LEVEL 1
ACTIVE TRACE COMPONENTS all, M
B
B Wed Jul 11 16:54:35 2007
B create_con (con_name=R/3)
B Loading DB library 'C:\usr\sap\DEV\SYS\exe\run\dboraslib.dll' ...
M
M Wed Jul 11 16:54:36 2007
M *** ERROR => DlLoadLib: LoadLibrary(C:\usr\sap\DEV\SYS\exe\run\dboraslib.dll) Error 126 [dlnt.c 226]
M Error 126 = "The specified module could not be found."
B *** ERROR => Couldn't load library 'C:\usr\sap\DEV\SYS\exe\run\dboraslib.dll'
[dbcon.c 3789]
M systemid 560 (PC with Windows NT)
M relno 6200
M patchlevel 0
M patchno 251
M intno 20020600
M pid 4244
M
M ***LOG Q0Q=> tskh_init, WPStart (Workproc 1 4244) [dpxxdisp.c 1016]
I MtxInit: -2 0 0
X
X Wed Jul 11 16:54:37 2007
X EmInit: MmSetImplementation( 2 ).
X <ES> client 1 initializing ....
X Using implementation std
M <EsNT> Memory Reset enabled as NT default
X ES initialized.
M
M Wed Jul 11 16:54:39 2007
M calling db_connect ...
B create_con (con_name=R/3)
B Loading DB library 'C:\usr\sap\DEV\SYS\exe\run\dboraslib.dll' ...
M *** ERROR => DlLoadLib: LoadLibrary(C:\usr\sap\DEV\SYS\exe\run\dboraslib.dll) Error 126 [dlnt.c 226]
M Error 126 = "The specified module could not be found."
B *** ERROR => Couldn't load library 'C:\usr\sap\DEV\SYS\exe\run\dboraslib.dll'
[dbcon.c 3789]
M ***LOG R19=> tskh_init, db_connect ( DB-Connect 008192) [thxxhead.c 1098]
M in_ThErrHandle: 1
M *** ERROR => tskh_init: db_connect (step 1, th_errno 13, action 3, level 1) [thxxhead.c 8277]
M
M Info for wp 1
M
M stat = 4
M reqtype = 1
M act_reqtype = -1
M tid = -1
M mode = 255
M len = -1
M rq_id = -1
M rq_source = 255
M last_tid = 0
M last_mode = 0
M rfc_req = 0
M report = > <
M action = 0
M tab_name = > <
M
M *****************************************************************************
M *
M * LOCATION SAP-Server pandu_DEV_00 on host pandu (wp 1)
M * ERROR tskh_init: db_connect
M *
M * TIME Wed Jul 11 16:54:39 2007
M * RELEASE 620
M * COMPONENT Taskhandler
M * VERSION 1
M * RC 13
M * MODULE thxxhead.c
M * LINE 8408
M * COUNTER 1
M *
M *****************************************************************************
M
M Entering TH_CALLHOOKS
M ThCallHooks: call hook >SAP-Trace buffer write< for event BEFORE_DUMP
M ThCallHooks: call hook >ThrSaveSPAFields< for event BEFORE_DUMP
M *** ERROR => ThrSaveSPAFields: no valid thr_wpadm [thxxrun1.c 672]
M *** ERROR => ThCallHooks: event handler ThrSaveSPAFields for event BEFORE_DUMP failed [thxxtool3.c 235]
M Entering ThSetStatError
M Entering ThReadDetachMode
M call ThrShutDown (1)...
B dbtbxbuf: Buffer TBX_SINGLE not available
M ***LOG Q02=> wp_halt, WPStop (Workproc 1 4244) [dpnttool.c 345]
2.
trc file: "dev_w2", trc level: 1, release: "620"
ACTIVE TRACE LEVEL 1
ACTIVE TRACE COMPONENTS all, M
B
B Wed Jul 11 16:54:37 2007
B create_con (con_name=R/3)
B Loading DB library 'C:\usr\sap\DEV\SYS\exe\run\dboraslib.dll' ...
M *** ERROR => DlLoadLib: LoadLibrary(C:\usr\sap\DEV\SYS\exe\run\dboraslib.dll) Error 126 [dlnt.c 226]
M Error 126 = "The specified module could not be found."
B *** ERROR => Couldn't load library 'C:\usr\sap\DEV\SYS\exe\run\dboraslib.dll'
[dbcon.c 3789]
M systemid 560 (PC with Windows NT)
M relno 6200
M patchlevel 0
M patchno 251
M intno 20020600
M pid 5888
M
M ***LOG Q0Q=> tskh_init, WPStart (Workproc 2 5888) [dpxxdisp.c 1016]
I
I Wed Jul 11 16:54:39 2007
I MtxInit: -2 0 0
X EmInit: MmSetImplementation( 2 ).
X <ES> client 2 initializing ....
X Using implementation std
M <EsNT> Memory Reset enabled as NT default
X ES initialized.
M
M Wed Jul 11 16:54:40 2007
M calling db_connect ...
B create_con (con_name=R/3)
B Loading DB library 'C:\usr\sap\DEV\SYS\exe\run\dboraslib.dll' ...
M *** ERROR => DlLoadLib: LoadLibrary(C:\usr\sap\DEV\SYS\exe\run\dboraslib.dll) Error 126 [dlnt.c 226]
M Error 126 = "The specified module could not be found."
B *** ERROR => Couldn't load library 'C:\usr\sap\DEV\SYS\exe\run\dboraslib.dll'
[dbcon.c 3789]
M ***LOG R19=> tskh_init, db_connect ( DB-Connect 008192) [thxxhead.c 1098]
M in_ThErrHandle: 1
M *** ERROR => tskh_init: db_connect (step 1, th_errno 13, action 3, level 1) [thxxhead.c 8277]
M
M Info for wp 2
M
M stat = 4
M reqtype = 1
M act_reqtype = -1
M tid = -1
M mode = 255
M len = -1
M rq_id = -1
M rq_source = 255
M last_tid = 0
M last_mode = 0
M rfc_req = 0
M report = > <
M action = 0
M tab_name = > <
M
M *****************************************************************************
M *
M * LOCATION SAP-Server pandu_DEV_00 on host pandu (wp 2)
M * ERROR tskh_init: db_connect
M *
M * TIME Wed Jul 11 16:54:40 2007
M * RELEASE 620
M * COMPONENT Taskhandler
M * VERSION 1
M * RC 13
M * MODULE thxxhead.c
M * LINE 8408
M * COUNTER 1
M *
M *****************************************************************************
M
M Entering TH_CALLHOOKS
M ThCallHooks: call hook >SAP-Trace buffer write< for event BEFORE_DUMP
M ThCallHooks: call hook >ThrSaveSPAFields< for event BEFORE_DUMP
M *** ERROR => ThrSaveSPAFields: no valid thr_wpadm [thxxrun1.c 672]
M *** ERROR => ThCallHooks: event handler ThrSaveSPAFields for event BEFORE_DUMP failed [thxxtool3.c 235]
M Entering ThSetStatError
M Entering ThReadDetachMode
M call ThrShutDown (1)...
M ***LOG Q02=> wp_halt, WPStop (Workproc 2 5888) [dpnttool.c 345] -
Dispatcher running but not connected to mesage server
Hello,
The message server is not able to connect to the dispatcher and we are neither able to work in portal nor connect to backend.
Found the following error message in log files
ERROR => MsSCheckConnections: no response from client
ERROR => MsSCheckConnections: disconnect now
Can anyone suggest what can be done.
Regards,
KarthikPlease check this forums subject. It is SAP Business One System Administration - dedicate to SAP Business One System only.
Close your thread and post to a proper forum. To make other members read your message easily, at least some line breaks are needed in your message.
Thanks,
Gordon -
Disp+work.exe Running but not connected to Message server
Dear All,
I install SAP NetWeaver 7.0 ABAP Trial Version on my PC (Win XP SP2, Proc 2.4 GHZ, RAM 1 GB) installation success, but when I start the application server through mmc the dispatcher failed to start.
I've tried to restart my machine, the problem still there.....
Please help me to fix this problem...
Thanks.
EndiI got the same error, anyone can help ???
-
'DISPATCHER IS RUNNING BUT NOT CONNETED TO MESSAGE SERVER'
hi..
iam trying to start my server, in process list iam getting dispatcher is not getting start.first iam getting 'DISPATCHER IS RUNNING BUT NOT CONNETED TO MESSAGE SERVER' it is in yellow color, after some time , it is changing to green color but the message is ' MESSAGE SERVER IS OK BUT DIALOG QUEUE IS STAND STILL' afere some time its getting stop.
can any one help me pls what is the problem?Dear friend
Your database is notworking
shailesh Tiwari -
Disp+work.exe is running but not conneceted to message server
Hi All
disp+work.exe is running but not conneceted to message server
Regards
BlueHi,
Did you tried restarting the server ?
is there any error related to the shared memory ?
I suggest you to restart and check ..if still no luck..
better post the query in SAP Basis Forum with all the dump you are getting ..you willget quicker responses..
HTH
Rajesh -
My Ipad has stopped receiving emails today. It has IOS7 on it. The settings are correct but says "connection to the server failed" help!
It is the same accout that has been working find for years and just after I updated the software this has happened. My Mac is still receiving and sending via Outlook with the same account and settings. My Iphone 5C has also stopped and I tried deleting the account and adding again (via exchange as it's an exchange accout) the same way I always do and it won't even recognise it to add the settings.
So annoying. Can anyone help?iOS: Unable to send or receive email
http://support.apple.com/kb/TS3899
Can’t Send Emails on iPad – Troubleshooting Steps
http://ipadhelp.com/ipad-help/ipad-cant-send-emails-troubleshooting-steps/
iPad Mail
http://www.apple.com/support/ipad/mail/
Cheers, Tom -
my macbook connects to my wifi but when i bring up safari it says you are not connected to the internet, please help...
Try restarting the browser or computer..
if it still doesn't work, try with a different browser like chrome or mozilla -
I bought new Macbook Pro 13" around two months before .My Apple ID is working on all other things except app store . It is buffering for a lot of time and lastly coming on screen " can not connect to app store " Please help me
Have you tried repairing disk permissions : iTunes download error -45054
-
PC crashed. CD-Rom not working. Downloaded CS5 Web Premium but not able to install. Please Help. Help.
I had problem with my CD-rom, it not able to open. On top of that recently my PC crashed.
I managed to install other software, but not able to install CS5 Web Premium.
Ive downloaded the electronic version via Adobe Downloads, but not able install it. -
I can listen to my music with samsung soundbar wh 550 but i cannot do that with my mac book air.
I can connect to samsung soundbar with my mac but the connection drops immediately. Please help.
MacBook Air, iOS 10.9.4Contact Samsung for help.
Barry -
Dispatcher Running But Not Server Connected?
Hi Everyone,
we have bi portal in our landscape.
bi portal is automatically goes down.it works some time and some times it is not working.
and also it is very slow.how to improve the performance of server and stable the portal.
it autoomatically goes down and after some time server is up.
this gives this one
503 service unavailable
SAP WebAS Engine is starting
Message: Dispatcher Running but no server connected
Please Do Needful.
Thanks
SubbaRao ChintaDear Subba Rao,
Refer to SAP Notes: 943498, 764417 and figure out the logs for dev_jcontrol, dev_bootstrap, std_server0.out which would give you an understanding of the issue.
Good Luck!
Sandeep Tudumu -
I connected my ipad and iphone to itunes this morning and downloaded updates...the iphone is fine..but my ipad is giving me the message...you have not signed up for a data plan..but, when it asks me to sign up..the message says Safari can't open the page because it isn't connected to the server...Mail isn't working either...help.
Try this:
1. Turn off iPad. Press and hold the Sleep/Wake button for a few seconds until the red slider appears, slide to turn off.
2. Connect USB cable to computer
3. Press and hold the Home button down and connect the docking end of cable to iPad
4. Continue holding the Home button until you see the "Connect To iTune" screen
5. Release the Home button
6. Open iTune (make sure you have the newest version of iTune)
7. You should see "iTunes has detected an iPad in recovery mode"
8. Use iTune to restore iPad
Note: You need to be patient and repeat the above many times to recover your iPad -
Workprocesses not connecting to message server
Hi all,
the sapinstance is not comming up after restart.
the problems are
1.R3trance -d return code =0000
2.At SQL prompt> ORA-12154 error coming .
3. trace file for dispatcher.
trc file: "dev_disp", trc level: 1, release: "700"
sysno 00
sid EC6
systemid 560 (PC with Windows NT)
relno 7000
patchlevel 0
patchno 144
intno 20050900
make: multithreaded, Unicode, optimized
pid 4072
Mon Sep 15 12:28:59 2008
kernel runs with dp version 232000(ext=109000) (@(#) DPLIB-INT-VERSION-232000-UC)
length of sys_adm_ext is 576 bytes
SWITCH TRC-HIDE on ***
***LOG Q00=> DpSapEnvInit, DPStart (00 4072) [dpxxdisp.c 1243]
shared lib "dw_xml.dll" version 144 successfully loaded
shared lib "dw_xtc.dll" version 144 successfully loaded
shared lib "dw_stl.dll" version 144 successfully loaded
shared lib "dw_gui.dll" version 144 successfully loaded
shared lib "dw_mdm.dll" version 144 successfully loaded
rdisp/softcancel_sequence : -> 0,5,-1
use internal message server connection to port 3900
Mon Sep 15 12:29:04 2008
WARNING => DpNetCheck: NiAddrToHost(1.0.0.0) took 5 seconds
***LOG GZZ=> 1 possible network problems detected - check tracefile and adjust the DNS settings [dpxxtool2.c 5371]
MtxInit: 30000 0 0
DpSysAdmExtInit: ABAP is active
DpSysAdmExtInit: VMC (JAVA VM in WP) is not active
DpIPCInit2: start server >H2SEC6_EC6_00 <
DpShMCreate: sizeof(wp_adm) 18672 (1436)
DpShMCreate: sizeof(tm_adm) 4270848 (21248)
DpShMCreate: sizeof(wp_ca_adm) 24000 (80)
DpShMCreate: sizeof(appc_ca_adm) 8000 (80)
DpCommTableSize: max/headSize/ftSize/tableSize=500/8/528056/528064
DpShMCreate: sizeof(comm_adm) 528064 (1048)
DpSlockTableSize: max/headSize/ftSize/fiSize/tableSize=0/0/0/0/0
DpShMCreate: sizeof(slock_adm) 0 (96)
DpFileTableSize: max/headSize/ftSize/tableSize=0/0/0/0
DpShMCreate: sizeof(file_adm) 0 (72)
DpShMCreate: sizeof(vmc_adm) 0 (1544)
DpShMCreate: sizeof(wall_adm) (38456/34360/64/184)
DpShMCreate: sizeof(gw_adm) 48
DpShMCreate: SHM_DP_ADM_KEY (addr: 05DE0040, size: 4930904)
DpShMCreate: allocated sys_adm at 05DE0040
DpShMCreate: allocated wp_adm at 05DE2090
DpShMCreate: allocated tm_adm_list at 05DE6980
DpShMCreate: allocated tm_adm at 05DE69B0
DpShMCreate: allocated wp_ca_adm at 061F94B0
DpShMCreate: allocated appc_ca_adm at 061FF270
DpShMCreate: allocated comm_adm at 062011B0
DpShMCreate: system runs without slock table
DpShMCreate: system runs without file table
DpShMCreate: allocated vmc_adm_list at 06282070
DpShMCreate: allocated gw_adm at 062820B0
DpShMCreate: system runs without vmc_adm
DpShMCreate: allocated ca_info at 062820E0
DpShMCreate: allocated wall_adm at 062820E8
MBUF state OFF
DpCommInitTable: init table for 500 entries
ThTaskStatus: rdisp/reset_online_during_debug 0
EmInit: MmSetImplementation( 2 ).
MM global diagnostic options set: 0
<ES> client 0 initializing ....
<ES> InitFreeList
<ES> block size is 1024 kByte.
Using implementation view
<EsNT> Using memory model view.
<EsNT> Memory Reset disabled as NT default
<ES> 4095 blocks reserved for free list.
ES initialized.
ERROR => DpAsCreate: CreateProcess (3: No such process) [dpntdisp.c 467]
***LOG Q0I=> DpAsCreate, CreateProcess ( CreateProcess 3) [dpntdisp.c 469]
Memory diagnostic *
Systeminformation
Processor-Typ : Intel Pentium Pro
Processor-Count : 8
Operating System : NT 5.2, Build 3790
Service Pack : Service Pack 1
NT Pagefile Informations
Config. minimum size : 8388608 K
Config. maximum size : 12582912 K
Avail. maximum size : 12582912 K
Num
Pagefile
Min.Size
Max.Size
Avail.Max
Curr.Size
1
c:\pagefile.sys
8388608 K
12582912 K
12582912 K
8372224 K
NT Task Manager Informations
Total Handles : 0
Total Threads : 0
Total Processes : 0
Commit Charge Total : 5845420 K
Commit Charge Limit : 12382576 K
Commit Charge Peak : 5845452 K
Phys.Memory Total : 54 K
Phys.Memory Available : 92263112 K
File Cache : 17376774 K
Kernel Memory Total : 2084091208 K
Kernel Memory Paged : 0 K
Kernel Memory Nonpaged : 92263140 K
Memory usage of current process
Total virt.address space : 2097024 K
Avail.virt.address space : 735836 K
Private Pages : 0 K
Total heap size : 12947 K
Virtual memory regions : 0 K
Uncommitted heap memory : 6068 K
Allocated heap memory : 6748 K
Moveable heap memory : 0 K
DDE shared heap memory : 0 K
Memory usage of all processes
PID
Image
Instance
Work.Set
WS Peak
Priv.Pages
PP Peak
Pg Fault
592
sapstartsrv.exe
16188 K
16204 K
19096 K
19120 K
4
3832
msg_server.EXE
[MS] EC6_01
7752 K
7752 K
10316 K
10316 K
1
984
enserver.EXE
[**] EC6_01
13644 K
13644 K
53448 K
53448 K
3
1484
msg_server.EXE
[MS] EC6_00
8160 K
8160 K
10696 K
10696 K
2
4072
disp+work.EXE
31972 K
32032 K
67548 K
67652 K
7
1860
igswd.EXE
[**] EC6_00
2612 K
2860 K
1484 K
1756 K
0
Sum
80328 K
162588 K
DP_FATAL_ERROR => Gateway could not be started - I better exit now
DISPATCHER EMERGENCY SHUTDOWN ***
increase tracelevel of WPs
NiWait: sleep (10000ms) ...
NiISelect: timeout 10000ms
NiISelect: maximum fd=1557
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Mon Sep 15 12:29:14 2008
NiISelect: TIMEOUT occured (10000ms)
dump system status
Workprocess Table (long) Mon Sep 15 06:59:14 2008
========================
No Ty. Pid Status Cause Start Err Sem CPU Time Program Cl User Action Table
0 DIA -1 Run no 0 0 0
1 DIA -1 Run no 0 0 0
2 DIA -1 Run no 0 0 0
3 DIA -1 Run no 0 0 0
4 DIA -1 Run no 0 0 0
5 DIA -1 Run no 0 0 0
6 UPD -1 Run no 0 0 0
7 ENQ -1 Run no 0 0 0
8 BTC -1 Run no 0 0 0
9 BTC -1 Run no 0 0 0
10 BTC -1 Run no 0 0 0
11 SPO -1 Run no 0 0 0
12 UP2 -1 Run no 0 0 0
Dispatcher Queue Statistics Mon Sep 15 06:59:14 2008
===========================
--------++++--
+
Typ
now
high
max
writes
reads
--------++++--
+
NOWP
0
0
2000
0
0
--------++++--
+
DIA
0
0
2000
0
0
--------++++--
+
UPD
0
0
2000
0
0
--------++++--
+
ENQ
0
0
2000
0
0
--------++++--
+
BTC
0
0
2000
0
0
--------++++--
+
SPO
0
0
2000
0
0
--------++++--
+
UP2
0
0
2000
0
0
--------++++--
+
max_rq_id 0
wake_evt_udp_now 0
wake events total 0, udp 0 ( 0%), shm 0 ( 0%)
since last update total 0, udp 0 ( 0%), shm 0 ( 0%)
Dump of tm_adm structure: Mon Sep 15 06:59:14 2008
=========================
Term uid man user term lastop mod wp ta a/i (modes)
Workprocess Comm. Area Blocks Mon Sep 15 06:59:14 2008
=============================
Slots: 300, Used: 0, Max: 0
--------++--
+
id
owner
pid
eyecatcher
--------++--
+
NiWait: sleep (5000ms) ...
NiISelect: timeout 5000ms
NiISelect: maximum fd=1557
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Mon Sep 15 12:29:19 2008
NiISelect: TIMEOUT occured (5000ms)
DpHalt: shutdown server >H2SEC6_EC6_00 < (normal)
DpJ2eeDisableRestart
Switch off Shared memory profiling
ShmProtect( 57, 3 )
ShmProtect(SHM_PROFILE, SHM_PROT_RW
ShmProtect( 57, 1 )
ShmProtect(SHM_PROFILE, SHM_PROT_RD
DpWakeUpWps: wake up all wp's
[DpWpDied] W0 handle not set (PID:-1)
[DpWpDied] W1 handle not set (PID:-1)
[DpWpDied] W2 handle not set (PID:-1)
[DpWpDied] W3 handle not set (PID:-1)
[DpWpDied] W4 handle not set (PID:-1)
[DpWpDied] W5 handle not set (PID:-1)
[DpWpDied] W6 handle not set (PID:-1)
[DpWpDied] W7 handle not set (PID:-1)
[DpWpDied] W8 handle not set (PID:-1)
[DpWpDied] W9 handle not set (PID:-1)
[DpWpDied] W10 handle not set (PID:-1)
[DpWpDied] W11 handle not set (PID:-1)
[DpWpDied] W12 handle not set (PID:-1)
Stop work processes
Terminate gui connections
wait for end of work processes
not attached to the message server
cleanup EM
EsCleanup ....
EmCleanup() -> 0
Es2Cleanup: Cleanup ES2
***LOG Q05=> DpHalt, DPStop ( 4072) [dpxxdisp.c 10421]
Good Bye .....
Please help
SudhakarareddyHi,
If possible to restart the server and check it.
some times buffer not clear.
Regards,
Anil
Maybe you are looking for
-
Plz help me... Applet error...
Hi... I have a problem... I don't understand... I thing that right... but... Error #: 360 : unreported exception: java.lang.ClassNotFoundException; must be caught or declared to be thrown at line 191, column 23 --> Class.forName ("net.avenir.jdbc2.Dr
-
ICloud sync not working with BBQ10
Hello. Having recently swapped my iPhone 5 to BBQ10 I have been hit by an enormous amount of hassle. The main thing being the ability to sync my contacts and calender from my Mac on to the Q10. I have followed the online instructions and it is not wo
-
Problem Purchase order created in SAP R/3 sent in to File XI?
Hi all, I am new to XI, learning it myself. I am trying to "send purchase order created in SAP R/3 into XI". For that I am following the document titled as <b>"A Beginners Guide to SAP XI Settings, Part I "</b>. But I am getting problem in connectin
-
SM30 going to dump for a Ztable whose fields I recently changed
Hi All, Need to resolve a very urgent issue. We added a new field to a Ztable in DEV & hit the table maintenance generator with screen 8. However when I transport these changes to TS1, the SM30 transaction goes into dump with the error stating scree
-
Dear Experts, I'm having a problem with the use of the Planning Board. Basically, I don't know how to use it. Has anyone has a tutorial or documentation regarding the use of the planning board? I'm really hoping you'd answer this coz I need to use it