Dispatcher status showing stopped for disaster recovery server.
HI,
today to test the data in our disaster recovery server for which we have log shipping every 30minutes we started the server in sap level during the process we can see that work +disp status is showing stopped.when i checked the log files in work directory it is showing below errors.
C sloledb.cpp [OpenOledbConnection,line 22822]: Error/Message: (err 4060, sev 0), Cannot open database "INP" requested by the login. The login failed.
M * LOCATION SAP-Server atriooonsapdr01_INP_00 on host terhsapdr01 (wp 0)
M * ERROR tskh_init: db_connect
M *
M * TIME Mon Oct 06 16:31:42 2008
M * RELEASE 640
M * COMPONENT Taskhandler
M * VERSION 1
M * RC 13
M * MODULE thxxhead.c
M * LINE 9780
M * COUNTER 1
kindly suggest what to check and how to resolve.
Hi Anil.
you should be sure if user SAPINPDB exists in the database system and it is mapped to the SAPINPDB user of the DB.... this if you use SQL Server, but the rule should be something like this in other DB systems!!!
Regards
Pedro
Similar Messages
-
Dispatcher status showing stopped when we start the sap.
Hi,
when i am starting the sap dispacher is getting stopped after 5 to 10 seconds.kindly see the log below and advise what might have gone wrong.
trc file: "dev_w1", trc level: 1, release: "640"
ACTIVE TRACE LEVEL 1
ACTIVE TRACE COMPONENTS all, M
B
B Fri Oct 17 17:44:02 2008
B create_con (con_name=R/3)
B Loading DB library 'E:\usr\sap\INP\SYS\exe\run\dbmssslib.dll' ...
B Library 'E:\usr\sap\INP\SYS\exe\run\dbmssslib.dll' loaded
B Version of 'E:\usr\sap\INP\SYS\exe\run\dbmssslib.dll' is "640.00", patchlevel (0.152)
B New connection 0 created
M sysno 00
M sid INP
M systemid 560 (PC with Windows NT)
M relno 6400
M patchlevel 0
M patchno 175
M intno 20020600
M make: multithreaded, Unicode
M pid 4584
M
M ***LOG Q0Q=> tskh_init, WPStart (Workproc 1 4584) [dpxxdisp.c 1162]
I MtxInit: -2 0 0
M DpSysAdmExtCreate: ABAP is active
M DpShMCreate: sizeof(wp_adm) 30272 (1316)
M DpShMCreate: sizeof(tm_adm) 2969176 (14772)
M DpShMCreate: sizeof(wp_ca_adm) 24000 (80)
M DpShMCreate: sizeof(appc_ca_adm) 8000 (80)
M DpShMCreate: sizeof(comm_adm) 290000 (580)
M DpShMCreate: sizeof(vmc_adm) 0 (424)
M DpShMCreate: sizeof(wall_adm) (38456/34360/64/184)
M DpShMCreate: SHM_DP_ADM_KEY (addr: 08060040, size: 3401424)
M DpShMCreate: allocated sys_adm at 08060040
M DpShMCreate: allocated wp_adm at 08061B88
M DpShMCreate: allocated tm_adm_list at 080691C8
M DpShMCreate: allocated tm_adm at 080691F0
M DpShMCreate: allocated wp_ca_adm at 0833E048
M DpShMCreate: allocated appc_ca_adm at 08343E08
M DpShMCreate: allocated comm_adm_list at 08345D48
M DpShMCreate: allocated comm_adm at 08345D60
M DpShMCreate: allocated vmc_adm_list at 0838CA30
M DpShMCreate: system runs without vmc_adm
M DpShMCreate: allocated ca_info at 0838CA58
M DpShMCreate: allocated wall_adm at 0838CA60
X EmInit: MmSetImplementation( 2 ).
X <ES> client 1 initializing ....
X Using implementation flat
M <EsNT> Memory Reset disabled as NT default
X ES initialized.
M
M Fri Oct 17 17:44:03 2008
M calling db_connect ...
C Thread ID:4876
C Thank You for using the SLOLEDB-interface
C Using dynamic link library 'E:\usr\sap\INP\SYS\exe\run\dbmssslib.dll'
C dbmssslib.dll patch info
C patchlevel 0
C patchno 152
C patchcomment Connection check on (0,0) (988711)
C np:(local) connection used on TERHSAPDR01
C CopyLocalParameters: dbuser is 'inp'
C Using Provider SQLNCLI
C OpenOledbConnection: MARS property was set successfully.
C OpenOledbConnection: line 22822. hr: 0x8000ffff Login failed for user 'NT AUTHORITY\SYSTEM'.
C sloledb.cpp [OpenOledbConnection,line 22822]: Error/Message: (err 18456, sev 0), Login failed for user 'NT AUTHORITY\SYSTEM'.
C Procname: [OpenOledbConnection - no proc]
C sloledb.cpp [OpenOledbConnection,line 22822]: Error/Message: (err 4060, sev 0), Cannot open database "INP" requested by the login. The login failed.
C Procname: [OpenOledbConnection - no proc]
C sloledb.cpp [OpenOledbConnection,line 22822]: Error/Message: (err 0, sev 0), Invalid connection string attribute
C Procname: [OpenOledbConnection - no proc]
C Using Provider SQLNCLI
C OpenOledbConnection: MARS property was set successfully.
C OpenOledbConnection: line 22822. hr: 0x8000ffff Login failed for user 'NT AUTHORITY\SYSTEM'.
C sloledb.cpp [OpenOledbConnection,line 22822]: Error/Message: (err 18456, sev 0), Login failed for user 'NT AUTHORITY\SYSTEM'.
C Procname: [OpenOledbConnection - no proc]
C sloledb.cpp [OpenOledbConnection,line 22822]: Error/Message: (err 4060, sev 0), Cannot open database "INP" requested by the login. The login failed.
C Procname: [OpenOledbConnection - no proc]
C sloledb.cpp [OpenOledbConnection,line 22822]: Error/Message: (err 0, sev 0), Invalid connection string attribute
C Procname: [OpenOledbConnection - no proc]
C Using Provider SQLNCLI
C OpenOledbConnection: MARS property was set successfully.
C OpenOledbConnection: line 22822. hr: 0x8000ffff Login failed for user 'NT AUTHORITY\SYSTEM'.
C sloledb.cpp [OpenOledbConnection,line 22822]: Error/Message: (err 18456, sev 0), Login failed for user 'NT AUTHORITY\SYSTEM'.
C Procname: [OpenOledbConnection - no proc]
C sloledb.cpp [OpenOledbConnection,line 22822]: Error/Message: (err 4060, sev 0), Cannot open database "INP" requested by the login. The login failed.
C Procname: [OpenOledbConnection - no proc]
C sloledb.cpp [OpenOledbConnection,line 22822]: Error/Message: (err 0, sev 0), Invalid connection string attribute
C Procname: [OpenOledbConnection - no proc]
C failed to establish conn to np:(local).
C Retrying without protocol specifier: (local)
C Using Provider SQLNCLI
C OpenOledbConnection: MARS property was set successfully.
C OpenOledbConnection: line 22822. hr: 0x8000ffff Login failed for user 'NT AUTHORITY\SYSTEM'.
C sloledb.cpp [OpenOledbConnection,line 22822]: Error/Message: (err 18456, sev 0), Login failed for user 'NT AUTHORITY\SYSTEM'.
C Procname: [OpenOledbConnection - no proc]
C sloledb.cpp [OpenOledbConnection,line 22822]: Error/Message: (err 4060, sev 0), Cannot open database "INP" requested by the login. The login failed.
C Procname: [OpenOledbConnection - no proc]
C sloledb.cpp [OpenOledbConnection,line 22822]: Error/Message: (err 0, sev 0), Invalid connection string attribute
C Procname: [OpenOledbConnection - no proc]
C Using Provider SQLNCLI
C OpenOledbConnection: MARS property was set successfully.
C OpenOledbConnection: line 22822. hr: 0x8000ffff Login failed for user 'NT AUTHORITY\SYSTEM'.
C sloledb.cpp [OpenOledbConnection,line 22822]: Error/Message: (err 18456, sev 0), Login failed for user 'NT AUTHORITY\SYSTEM'.
C Procname: [OpenOledbConnection - no proc]
C sloledb.cpp [OpenOledbConnection,line 22822]: Error/Message: (err 4060, sev 0), Cannot open database "INP" requested by the login. The login failed.
C Procname: [OpenOledbConnection - no proc]
C sloledb.cpp [OpenOledbConnection,line 22822]: Error/Message: (err 0, sev 0), Invalid connection string attribute
C Procname: [OpenOledbConnection - no proc]
C Using Provider SQLNCLI
C OpenOledbConnection: MARS property was set successfully.
C OpenOledbConnection: line 22822. hr: 0x8000ffff Login failed for user 'NT AUTHORITY\SYSTEM'.
C sloledb.cpp [OpenOledbConnection,line 22822]: Error/Message: (err 18456, sev 0), Login failed for user 'NT AUTHORITY\SYSTEM'.
C Procname: [OpenOledbConnection - no proc]
C sloledb.cpp [OpenOledbConnection,line 22822]: Error/Message: (err 4060, sev 0), Cannot open database "INP" requested by the login. The login failed.
C Procname: [OpenOledbConnection - no proc]
C sloledb.cpp [OpenOledbConnection,line 22822]: Error/Message: (err 0, sev 0), Invalid connection string attribute
C Procname: [OpenOledbConnection - no proc]
C failed to establish conn. 0
B ***LOG BY2=> sql error 0 performing CON [dbsh#3 @ 1204] [dbsh 1204 ]
B ***LOG BY0=> <message text not available> [dbsh#3 @ 1204] [dbsh 1204 ]
B ***LOG BY2=> sql error 0 performing CON [dblink#3 @ 428] [dblink 0428 ]
B ***LOG BY0=> <message text not available> [dblink#3 @ 428] [dblink 0428 ]
M ***LOG R19=> tskh_init, db_connect ( DB-Connect 000256) [thxxhead.c 1281]
M in_ThErrHandle: 1
M *** ERROR => tskh_init: db_connect (step 1, th_errno 13, action 3, level 1) [thxxhead.c 9595]
M
M Info for wp 1
M
M stat = 4
M reqtype = 1
M act_reqtype = -1
M rq_info = 0
M tid = -1
M mode = 255
M len = -1
M rq_id = 65535
M rq_source = 255
M last_tid = 0
M last_mode = 0
M int_checked_resource(RFC) = 0
M ext_checked_resource(RFC) = 0
M int_checked_resource(HTTP) = 0
M ext_checked_resource(HTTP) = 0
M report = > <
M action = 0
M tab_name = > <
M
M *****************************************************************************
M *
M * LOCATION SAP-Server terhsapdr01_INP_00 on host terhsapdr01 (wp 1)
M * ERROR tskh_init: db_connect
M *
M * TIME Fri Oct 17 17:44:03 2008
M * RELEASE 640
M * COMPONENT Taskhandler
M * VERSION 1
M * RC 13
M * MODULE thxxhead.c
M * LINE 9780
M * COUNTER 1
M *
M *****************************************************************************
M
M PfStatDisconnect: disconnect statistics
M Entering TH_CALLHOOKS
M ThCallHooks: call hook >ThrSaveSPAFields< for event BEFORE_DUMP
M *** ERROR => ThrSaveSPAFields: no valid thr_wpadm [thxxrun1.c 730]
M *** ERROR => ThCallHooks: event handler ThrSaveSPAFields for event BEFORE_DUMP failed [thxxtool3.c 254]
M Entering ThSetStatError
M Entering ThReadDetachMode
M call ThrShutDown (1)...
B dbtbxbuf: Buffer TBX_SINGLE not available
M ***LOG Q02=> wp_halt, WPStop (Workproc 1 4584) [dpnttool.c 357]
regards
anilHi,
This is related to user permission or password is wrong.
Pls check the user name and permission.
Regards,
Anil -
Disaster Recovery server for SAP and HACMP Cluster script for SAP ECC 6.0
Hi,
I need document for Disaster Recovery server for SAP? I have to configure the DR Server If you have, please share this document if possible.
Have you any cluster script ( HACMP Cluster script for SAP ECC 6.0 ) ?
Thanks & Regards,Hello, I'm doing a "Plant ECC6 to do a test disatre / Recovery.
During the installation, I would use the same <sidadm> existing as it is in the PRD.
If I tell you to install it during the same <sidadm> it will overwrite what already exists, or do I just enter the password of existing <sidadm>? -
SAP dispatcher status is stopped in Console how can i start it
Hi All
Help me out
*SAP dispatcher status is stopped in Console how can i start it
Dispatcher turns green to yellow suddenly and status changes to stopped and all WP elemets shows status as ended.
Alert from Syslog : SAP Basis System: Message server disconnected
Tracert : Disp+work.exe
trc file: "dev_disp", trc level: 1, release: "640"
Thu Oct 02 12:32:52 2008
kernel runs with dp version 128(ext=102) (@(#) DPLIB-INT-VERSION-128)
length of sys_adm_ext is 312 bytes
systemid 560 (PC with Windows NT)
relno 6400
patchlevel 0
patchno 21
intno 20020600
make: multithreaded, ASCII
pid 736
***LOG Q00=> DpSapEnvInit, DPStart (00 736) [dpxxdisp.c 1100]
shared lib "dw_xml.dll" version 21 successfully loaded
shared lib "dw_xtc.dll" version 21 successfully loaded
shared lib "dw_stl.dll" version 21 successfully loaded
shared lib "dw_gui.dll" version 21 successfully loaded
Thu Oct 02 12:32:58 2008
WARNING => DpNetCheck: NiAddrToHost(1.0.0.0) took 5 seconds
***LOG GZZ=> 1 possible network problems detected - check tracefile and adjust the DNS settings [dpxxtool2.c 3886]
MtxInit: -2 0 0
DpSysAdmExtInit: ABAP is active
DpSysAdmExtInit: JAVA is not active
DpShMCreate: sizeof(wp_adm) 6624 (828)
DpShMCreate: sizeof(tm_adm) 2219848 (11044)
DpShMCreate: sizeof(wp_ca_adm) 18000 (60)
DpShMCreate: sizeof(appc_ca_adm) 6000 (60)
DpShMCreate: sizeof(comm_adm) 192000 (384)
DpShMCreate: sizeof(vmc_adm) 0 (320)
DpShMCreate: sizeof(wall_adm) (22440/34344/56/100)
DpShMCreate: SHM_DP_ADM_KEY (addr: 05270040, size: 2505416)
DpShMCreate: allocated sys_adm at 05270040
DpShMCreate: allocated wp_adm at 052717A8
DpShMCreate: allocated tm_adm_list at 05273188
DpShMCreate: allocated tm_adm at 052731B0
DpShMCreate: allocated wp_ca_adm at 054910F8
DpShMCreate: allocated appc_ca_adm at 05495748
DpShMCreate: allocated comm_adm_list at 05496EB8
DpShMCreate: allocated comm_adm at 05496ED0
DpShMCreate: allocated vmc_adm_list at 054C5CD0
DpShMCreate: system runs without vmc_adm
DpShMCreate: allocated ca_info at 054C5CF8
DpShMCreate: allocated wall_adm at 054C5D00
MBUF state OFF
EmInit: MmSetImplementation( 2 ).
<ES> client 0 initializing ....
<ES> InitFreeList
<ES> block size is 1024 kByte.
Using implementation std
<EsNT> Memory Reset enabled as NT default
<EsNT> EsIUnamFileMapInit: Initialize the memory 2450 MB
<ES> 2449 blocks reserved for free list.
ES initialized.
rdisp/http_min_wait_dia_wp : 1 -> 1
***LOG Q0K=> DpMsAttach, mscon ( home) [dpxxdisp.c 9719]
CCMS: Initalizing shared memory of size 40000000 for monitoring segment.
CCMS: start to initalize 3.X shared alert area (first segment).
DpMsgAdmin: Set release to 6400, patchlevel 0
MBUF state PREPARED
MBUF component UP
DpMBufHwIdSet: set Hardware-ID
***LOG Q1C=> DpMBufHwIdSet [dpxxmbuf.c 1025]
DpMsgAdmin: Set patchno for this platform to 21
Release check o.K.
Thu Oct 02 12:33:38 2008
ERROR => W0 (pid 1500) died [dpxxdisp.c 12170]
ERROR => W1 (pid 3796) died [dpxxdisp.c 12170]
my types changed after wp death/restart 0xbf --> 0xbe
ERROR => W2 (pid 3548) died [dpxxdisp.c 12170]
my types changed after wp death/restart 0xbe --> 0xbc
ERROR => W3 (pid 1464) died [dpxxdisp.c 12170]
my types changed after wp death/restart 0xbc --> 0xb8
ERROR => W4 (pid 3368) died [dpxxdisp.c 12170]
ERROR => W5 (pid 3400) died [dpxxdisp.c 12170]
my types changed after wp death/restart 0xb8 --> 0xb0
ERROR => W6 (pid 2620) died [dpxxdisp.c 12170]
my types changed after wp death/restart 0xb0 --> 0xa0
ERROR => W7 (pid 380) died [dpxxdisp.c 12170]
my types changed after wp death/restart 0xa0 --> 0x80
DP_FATAL_ERROR => DpWPCheck: no more work processes
DISPATCHER EMERGENCY SHUTDOWN ***
increase tracelevel of WPs
killing W0-1500 (SIGUSR2)
ERROR => DpWpKill(1500, SIGUSR2) failed [dpxxtool.c 2468]
killing W1-3796 (SIGUSR2)
ERROR => DpWpKill(3796, SIGUSR2) failed [dpxxtool.c 2468]
killing W2-3548 (SIGUSR2)
ERROR => DpWpKill(3548, SIGUSR2) failed [dpxxtool.c 2468]
killing W3-1464 (SIGUSR2)
ERROR => DpWpKill(1464, SIGUSR2) failed [dpxxtool.c 2468]
killing W4-3368 (SIGUSR2)
ERROR => DpWpKill(3368, SIGUSR2) failed [dpxxtool.c 2468]
killing W5-3400 (SIGUSR2)
ERROR => DpWpKill(3400, SIGUSR2) failed [dpxxtool.c 2468]
killing W6-2620 (SIGUSR2)
ERROR => DpWpKill(2620, SIGUSR2) failed [dpxxtool.c 2468]
killing W7-380 (SIGUSR2)
ERROR => DpWpKill(380, SIGUSR2) failed [dpxxtool.c 2468]
NiWait: sleep (10000 msecs) ...
NiISelect: timeout 10000 ms
NiISelect: maximum fd=1593
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Thu Oct 02 12:33:48 2008
NiISelect: TIMEOUT occured (10000 ms)
dump system status
Workprocess Table (long) Thu Oct 02 07:03:48 2008
========================
No Ty. Pid Status Cause Start Err Sem CPU Time Program Cl User Action Table
0 DIA 1500 Ended no 1 0 0
1 DIA 3796 Ended no 1 0 0
2 UPD 3548 Ended no 1 0 0
3 ENQ 1464 Ended no 1 0 0
4 BTC 3368 Ended no 1 0 0
5 BTC 3400 Ended no 1 0 0
6 SPO 2620 Ended no 1 0 0
7 UP2 380 Ended no 1 0 0
Dispatcher Queue Statistics Thu Oct 02 07:03:48 2008
===========================
--------++++--
+
Typ
now
high
max
writes
reads
--------++++--
+
NOWP
0
3
2000
8
8
--------++++--
+
DIA
5
5
2000
5
0
--------++++--
+
UPD
0
0
2000
0
0
--------++++--
+
ENQ
0
0
2000
0
0
--------++++--
+
BTC
0
0
2000
0
0
--------++++--
+
SPO
0
0
2000
0
0
--------++++--
+
UP2
0
0
2000
0
0
--------++++--
+
max_rq_id 13
wake_evt_udp_now 0
wake events total 9, udp 7 ( 77%), shm 2 ( 22%)
since last update total 9, udp 7 ( 77%), shm 2 ( 22%)
Dump of tm_adm structure: Thu Oct 02 07:03:48 2008
=========================
Term uid man user term lastop mod wp ta a/i (modes)
Workprocess Comm. Area Blocks Thu Oct 02 07:03:48 2008
=============================
Slots: 300, Used: 1, Max: 0
--------++--
+
id
owner
pid
eyecatcher
--------++--
+
0
DISPATCHER
-1
WPCAAD000
NiWait: sleep (5000 msecs) ...
NiISelect: timeout 5000 ms
NiISelect: maximum fd=1593
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Thu Oct 02 12:33:53 2008
NiISelect: TIMEOUT occured (5000 ms)
Shutdown server ...
DpModState: buffer in state MBUF_PREPARED
NiBufSend starting
NiIWrite: write 110, 1 packs, MESG_IO, hdl 3, data complete
MsINiWrite: sent 110 bytes
MsIModState: change state to SHUTDOWN
DpModState: change server state from STARTING to SHUTDOWN
Switch off Shared memory profiling
ShmProtect( 57, 3 )
ShmProtect(SHM_PROFILE, SHM_PROT_RW
ShmProtect( 57, 1 )
ShmProtect(SHM_PROFILE, SHM_PROT_RD
DpWakeUpWps: wake up all wp's
Stop work processes...
Stop gateway
killing process (676) (SOFT_KILL)
Stop icman
killing process (924) (SOFT_KILL)
Terminate gui connections
[DpProcDied] Process lives (PID:676 HANDLE:1564)
waiting for termination of gateway
NiWait: sleep (1000 msecs) ...
NiISelect: timeout 1000 ms
NiISelect: maximum fd=1593
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Thu Oct 02 12:33:54 2008
NiISelect: TIMEOUT occured (1000 ms)
[DpProcDied] Process died (PID:676 HANDLE:1564)
[DpProcDied] Process died (PID:924 HANDLE:1556)
DpHalt: cancel all lcom connections
MPI CancelAll 2 -> 0
MPI DeleteAll 2 -> 0
NiIMyHostName: hostname = 'home'
AdGetSelfIdentRecord: > <
AdCvtRecToExt: opcode 60 (AD_SELFIDENT), ser 0, ex 0, errno 0
AdCvtRecToExt: opcode 4 (AD_STARTSTOP), ser 0, ex 0, errno 0
DpConvertRequest: net size = 163 bytes
NiBufSend starting
NiIWrite: write 562, 1 packs, MESG_IO, hdl 3, data complete
MsINiWrite: sent 562 bytes
send msg (len 110+452) to name -, type 4, key -
detach from message server
***LOG Q0M=> DpMsDetach, ms_detach () [dpxxdisp.c 9945]
NiBufSend starting
NiIWrite: write 110, 1 packs, MESG_IO, hdl 3, data complete
MsINiWrite: sent 110 bytes
MsIDetach: send logout to msg_server
MsIDetach: call exit function
DpMsShutdownHook called
NiSelClear: removed hdl 3 from selectset
MBUF state OFF
AdGetSelfIdentRecord: > <
AdCvtRecToExt: opcode 60 (AD_SELFIDENT), ser 0, ex 0, errno 0
AdCvtRecToExt: opcode 40 (AD_MSBUF), ser 0, ex 0, errno 0
AdCvtRecToExt: opcode 40 (AD_MSBUF), ser 0, ex 0, errno 0
blks_in_queue/wp_ca_blk_no/wp_max_no = 1/300/8
LOCK WP ca_blk 1
make DISP owner of wp_ca_blk 1
DpRqPutIntoQueue: put request into queue (reqtype 1, prio LOW, rq_id 19)
MBUF component DOWN
NiBufClose: clear extensions for hdl 3
NiBufSetStat: bufstat of hdl 3 changed from OK to OFF
NiICloseHandle: shutdown and close hdl 3 / socket 1572
MsIDetach: detach MS-system
EsCleanup ....
Thu Oct 02 12:33:55 2008
***LOG Q05=> DpHalt, DPStop ( 736) [dpxxdisp.c 8478]
Good Bye .....
Trace from WP table DIA 1
trc file: "dev_w0", trc level: 1, release: "640"
ACTIVE TRACE LEVEL 1
ACTIVE TRACE COMPONENTS all, M
B
B Thu Oct 02 12:32:59 2008
B create_con (con_name=R/3)
B Loading DB library 'C:\usr\sap\SUD\SYS\exe\run\dboraslib.dll' ...
B Library 'C:\usr\sap\SUD\SYS\exe\run\dboraslib.dll' loaded
B Version of 'C:\usr\sap\SUD\SYS\exe\run\dboraslib.dll' is "640.00", patchlevel (0.19)
B New connection 0 created
M systemid 560 (PC with Windows NT)
M relno 6400
M patchlevel 0
M patchno 21
M intno 20020600
M make: multithreaded, ASCII
M pid 1500
M
M ***LOG Q0Q=> tskh_init, WPStart (Workproc 0 1500) [dpxxdisp.c 1160]
I MtxInit: -2 0 0
M DpSysAdmExtCreate: ABAP is active
M DpSysAdmExtCreate: JAVA is not active
M DpShMCreate: sizeof(wp_adm) 6624 (828)
M DpShMCreate: sizeof(tm_adm) 2219848 (11044)
M DpShMCreate: sizeof(wp_ca_adm) 18000 (60)
M DpShMCreate: sizeof(appc_ca_adm) 6000 (60)
M DpShMCreate: sizeof(comm_adm) 192000 (384)
M DpShMCreate: sizeof(vmc_adm) 0 (320)
M DpShMCreate: sizeof(wall_adm) (22440/34344/56/100)
M DpShMCreate: SHM_DP_ADM_KEY (addr: 05A70040, size: 2505416)
M DpShMCreate: allocated sys_adm at 05A70040
M DpShMCreate: allocated wp_adm at 05A717A8
M DpShMCreate: allocated tm_adm_list at 05A73188
M DpShMCreate: allocated tm_adm at 05A731B0
M DpShMCreate: allocated wp_ca_adm at 05C910F8
M DpShMCreate: allocated appc_ca_adm at 05C95748
M DpShMCreate: allocated comm_adm_list at 05C96EB8
M DpShMCreate: allocated comm_adm at 05C96ED0
M DpShMCreate: allocated vmc_adm_list at 05CC5CD0
M DpShMCreate: system runs without vmc_adm
M DpShMCreate: allocated ca_info at 05CC5CF8
M DpShMCreate: allocated wall_adm at 05CC5D00
X EmInit: MmSetImplementation( 2 ).
X <ES> client 0 initializing ....
X Using implementation std
M <EsNT> Memory Reset enabled as NT default
X ES initialized.
M calling db_connect ...
C Got ORACLE_HOME=C:\oracle\ora92 from environment
C Client NLS settings: AMERICAN_AMERICA.WE8DEC
C Logon as OPS$-user to get SAPSUD's password
C Connecting as /@SUD on connection 0 ...
C Attaching to DB Server SUD (con_hdl=0,svchp=040D325C,svrhp=040D3E34)
C Starting user session (con_hdl=0,svchp=040D325C,srvhp=040D3E34,usrhp=040DC614)
C *** ERROR => OCI-call 'OCISessionBegin' failed: rc = 1033
[dboci.c 3721]
C Detaching from DB Server (con_hdl=0,svchp=040D325C,srvhp=040D3E34)
C *** ERROR => CONNECT failed with sql error '1033'
[dbsloci.c 9753]
C Try to connect with default password
C Connecting as SAPSUD/<pwd>@SUD on connection 0 ...
C Attaching to DB Server SUD (con_hdl=0,svchp=040D325C,svrhp=040D3E34)
C Starting user session (con_hdl=0,svchp=040D325C,srvhp=040D3E34,usrhp=040DC614)
C *** ERROR => OCI-call 'OCISessionBegin' failed: rc = 1033
[dboci.c 3721]
C Detaching from DB Server (con_hdl=0,svchp=040D325C,srvhp=040D3E34)
C *** ERROR => CONNECT failed with sql error '1033'
[dbsloci.c 9753]
B ***LOG BV3=> severe db error 1033 ; work process is stopped [dbsh#2 @ 1195] [dbsh 1195 ]
B ***LOG BY2=> sql error 1033 performing CON [dblink#1 @ 419] [dblink 0419 ]
B ***LOG BY0=> ORA-01033: ORACLE initialization or shutdown in progress [dblink#1 @ 419] [dblink 0419 ]
M ***LOG R19=> tskh_init, db_connect ( DB-Connect 000256) [thxxhead.c 1271]
M in_ThErrHandle: 1
M *** ERROR => tskh_init: db_connect (step 1, th_errno 13, action 3, level 1) [thxxhead.c 9379]
M
M Info for wp 0
M
M stat = 4
M reqtype = 1
M act_reqtype = -1
M rq_info = 0
M tid = -1
M mode = 255
M len = -1
M rq_id = 65535
M rq_source = 255
M last_tid = 0
M last_mode = 0
M int_checked_resource(RFC) = 0
M ext_checked_resource(RFC) = 0
M int_checked_resource(HTTP) = 0
M ext_checked_resource(HTTP) = 0
M report = > <
M action = 0
M tab_name = > <
M
M *****************************************************************************
M *
M * LOCATION SAP-Server home_SUD_00 on host home (wp 0)
M * ERROR tskh_init: db_connect
M *
M * TIME Thu Oct 02 12:32:59 2008
M * RELEASE 640
M * COMPONENT Taskhandler
M * VERSION 1
M * RC 13
M * MODULE thxxhead.c
M * LINE 9555
M * COUNTER 1
M *
M *****************************************************************************
M
M PfStatDisconnect: disconnect statistics
M Entering TH_CALLHOOKS
M ThCallHooks: call hook >ThrSaveSPAFields< for event BEFORE_DUMP
M *** ERROR => ThrSaveSPAFields: no valid thr_wpadm [thxxrun1.c 730]
M *** ERROR => ThCallHooks: event handler ThrSaveSPAFields for event BEFORE_DUMP failed [thxxtool3.c 246]
M Entering ThSetStatError
M Entering ThReadDetachMode
M call ThrShutDown (1)...
M ***LOG Q02=> wp_halt, WPStop (Workproc 0 1500) [dpnttool.c 357]
Thanks in advance please help me out
Edited by: sudhakar aleti on Oct 2, 2008 12:54 PM
Edited by: sudhakar aleti on Oct 2, 2008 12:56 PMHi All please find the result r3trans -d
4 ETW000 r3trans version 6.09 (release 640 - 28.04.04 - 16:14:00).
4 ETW000 ===============================================
4 ETW000
4 ETW000 date&time : 03.10.2008 - 11:02:35
4 ETW000 control file: <no ctrlfile>
4 ETW000 R3trans was called as follows: r3trans -d
4 ETW000 trace at level 2 opened for a given file pointer
4 ETW000 [dev trc ,00000] Fri Oct 03 11:02:36 2008 5494 0.005494
4 ETW000 [dev trc ,00000] db_con_init called 40 0.005534
4 ETW000 [dev trc ,00000] create_con (con_name=R/3) 26 0.005560
4 ETW000 [dev trc ,00000] Loading DB library 'dboraslib.dll' ... 33 0.005593
4 ETW000 [dev trc ,00000] load shared library (dboraslib.dll), hdl 0 139566 0.145159
4 ETW000 [dev trc ,00000] using "C:\usr\sap\SUD\SYS\exe\run\dboraslib.dll"
4 ETW000 22 0.145181
4 ETW000 [dev trc ,00000] Library 'dboraslib.dll' loaded 7 0.145188
4 ETW000 [dev trc ,00000] function DbSlExpFuns loaded from library dboraslib.dll
4 ETW000 13 0.145201
4 ETW000 [dev trc ,00000] Version of 'dboraslib.dll' is "640.00", patchlevel (0.19)
4 ETW000 2501 0.147702
4 ETW000 [dev trc ,00000] function dsql_db_init loaded from library dboraslib.dll
4 ETW000 12 0.147714
4 ETW000 [dev trc ,00000] function dbdd_exp_funs loaded from library dboraslib.dll
4 ETW000 18 0.147732
4 ETW000 [dev trc ,00000] New connection 0 created 13 0.147745
4 ETW000 [dev trc ,00000] 0: name = R/3, con_id = -000000001 state = DISCONNECTED, perm = YES, reco = NO , con_max = 255, con_opt = 255, occ = NO
4 ETW000 15 0.147760
4 ETW000 [dev trc ,00000] db_con_connect (con_name=R/3) 12391 0.160151
4 ETW000 [dev trc ,00000] find_con_by_name found the following connection for reuse:
4 ETW000 12 0.160163
4 ETW000 [dev trc ,00000] 0: name = R/3, con_id = 000000000 state = DISCONNECTED, perm = YES, reco = NO , con_max = 255, con_opt = 255, occ = NO
4 ETW000 14 0.160177
4 ETW000 [dev trc ,00000] Found ORACLE_HOME=C:\oracle\ora92 in Registry 796 0.160973
4 ETW000 [dev trc ,00000] -->oci_initialize 400 0.161373
4 ETW000 [dev trc ,00000] Client NLS settings: AMERICAN_AMERICA.WE8MSWIN1252
4 ETW000 34020 0.195393
4 ETW000 [dbsloci. ,00000] *** ERROR => Cannot connect: TNS-name missing 11 0.195404
2EETW169 no connect possible: "DBMS = ORACLE --- TWO_TASK = ''"
Thanks
Sudhakar A -
Datafiles Mismatch in production & disaster recovery server
Datafiles Mismatch in production & disaster recovery server though everything in sync
We performed all the necessary prerequisites & processes related to DRS switchover successfully also our DRS server is constantly updated through logs application in mount state whan we opened DRS database in mount state it opened successfully however when we issued command
Recover database
It dumped with foll errors:
ora-01122 database file 162 failed verification check
ora-01110 data file 162 </oracle/R3P/sapdata7/r3p*****.data>
ora-01251 unknown file header version read for file 162
as I do not remember the exact name now
However upon comparing the same file at production(which was now in shutdown state) the file sizes were mismatching so we went ahead to copy the datafile from production to DRS in database shutdown state at DRS through RCP utitlity of AIX 5.3 since our Operating system is AIX 5.3
Though this remote copy was success
we again started database in mount state & issued command
Recover database
But still it dump the same error but now for another datafile in DRS
I mean I would appreciate if somebody could point out that despite our DRS was constantly being updated through our Production in terms of continuous log application before this activity logs were sync in both the systems also origlos,mirrorlogs & controlfiles were pulled from production system as it is infact the whole structure was as replica of production system , then why did datafile sizes mismatch??
Details
SAP version :- 4.7
WAS :- 620
Database :- Oracle 9.2
Operating system :- AIX 5.3I am in a process of DR Planning.
My present setup :
O/S : HP-UX 11.31
SAP ECC 6
Oracle 10g Database.
I know about dataguard and i have implemnted same on our other application but not for SAP.
I have ame doubts and I request you to please guide me for the same.
1. SAP License key -- it required hardware key. So will i have to generate license key another hardware key i.e. for machine where standby database.
2. Database on standby site will be in manage recovery mode. Will I have to make any changes or any other file realted to SAP on standby host ? (some i know such as I upgrade SAP kernal, same i have to upgrade at standby host)
Will you give me some link related to document for DR -
How to migrate Planning from Production to Disaster-Recovery server?
We are using Planning 11.1.1.3 Oracle repository. Presently our DR Planning Application name is different than production's name, and the DR's Windows server names are different from Production's. Otherwise, all other configuration the same.
How do we migrate Planning from Production to Disaster-Recovery server? We stopped Planning on DR server. Then we exported production planning Oracle repository and imported it to DR Planning. We restarted DR's Planning. DR planning seems to be running fine, but I am afraid to click "Refresh Planning" on DR Planning - it might update Production server. So how can I be sure DR and Production planning are disconnected ?
Is there anything we need to do? This method seems to be faster than migrating with LCM.
Edited by: Essbase Fan on Oct 18, 2010 10:11 AMYou are definitely go about it the correct way, if you are migrating the whole planning application I have to agree it is a safer and quicker route.
The connection information to essbase is stored in the planning system database/schema so as long as you have not migrated that then you should be good to refresh.
To put your mind at rest, log into the planning application and edit the datasource associated with the application then you will see where the essbase server is it is going to refresh.
Cheers
John
http://john-goodwin.blogspot.com/ -
hi experts
i am using
SAP Version: ECC 6.0 SR3
Database Version: 10.2.0.4
OS Version: HP-UX B.11.31
i have a server where O/S installed. i want to make this as a disaster Recovery server.
now i want to know.
1- what is the man power needed.?
2 -which technical guys i needed.?
3-how much time it will take?
4- can a basis consultant only do this job?
5-Is any separate team for DR server installation.
kindly guide me in detail regarding this.
thanks> SAP Version: ECC 6.0 SR3
> Database Version: 10.2.0.4
> OS Version: HP-UX B.11.31
>
> i have a server where O/S installed. i want to make this as a disaster Recovery server.
> now i want to know.
> 1- what is the man power needed.?
It's possible to do all this with one guy, but if you're inventive you can surely employ more people with this.
> 2 -which technical guys i needed.?
You will need people that are actually capable to do this.
The most likely people for that seem to be HP-UX and Oracle admins.
> 3-how much time it will take?
Depends totally on the business recoverability requirements.
How much downtime can it take until your business breaks?
How much is business willing to pay for that?
Usually you build the whole backup setup around those two questions.
> 4- can a basis consultant only do this job?
Depends on the basis consultant.
Usually those guys can at least recover the database.
> 5-Is any separate team for DR server installation.
Well, if there is one in your company - yes.
Most often and usually there won't be an extrea team for that as ensuring recoverability is one of the prime tasks of every DBA.
regards,
Lars -
What to have for disaster recovery? Full backup?
What do we need to have? In case of we lose everything what to backup from where? There is an BART system I think in 4.1 does it enough for full system recovery? Or do we also need to export users from BAT->export ? Why are they seperate? (ps. I talk about 4.1)
thxHi Okan,
The Utility you are referring to is called BARS (Backup and Restore) and is the data you need for Disaster Recovery/CCM Rebuilds. You will not need the Bat-Export as all the phone details etc are captured in a .tar file during BARS Backup;
The following list shows the data that is backed up and restored for the Cisco CallManager publisher database:
Hosts and LMhosts files
Latest Cisco CallManager publisher database
DC Directory LDAP directory
For Cisco CallManager 3.3.x DirectoryConfiguration.ini from C:\dcdsrvr.
For Cisco CallManager 4.0(x) or later UMDirectoryConfiguration.ini.
Directory schema files avvid_schemaV*.txt
Publisher and subscriber configuration information to replication.ini file.
Cisco CallManager version to version.ini file.
If the option to backup CDR is chosen, CDR database and CDR/CMR flat files from Local CDR Path
TFTP files from C:\Program Files\Cisco\TFTPPath (the default path)
TFTP files from alternate file locations
Cisco Bulk Administration Tool (BAT) files-templates from C:\CiscoWebs\BAT, CSV files from C:\BAT and the BATversion.asp file.
HKLM\Software\Cisco Systems, Inc. (registry keys)
Cisco CallManager DSN
Security files (certificates) from under C:\Program Files\Cisco\Certificates. This applies only to Cisco CallManager 4.x or later.
LDAPConfig.ini for IPMA configuration.
Here is a good doc that has all the info for doing Backups and then restoring on the new box;
http://www.cisco.com/en/US/docs/voice_ip_comm/cucm/bars/4_0_11/ag-4011.html
Hope this helps!
Rob -
Crystal Disaster Recovery server
Is there a known best practice to have 2 mirrored Crystal Servers running simulaneously? We have 1 we use in production and we are trying to configure one for disaster recovery. I haven't been able to find anything on this. I welcome any help.
Hello, I'm doing a "Plant ECC6 to do a test disatre / Recovery.
During the installation, I would use the same <sidadm> existing as it is in the PRD.
If I tell you to install it during the same <sidadm> it will overwrite what already exists, or do I just enter the password of existing <sidadm>? -
TV shows stopping for no reason
I have a problem with tv shows stopping for no reason on the iPod Touch. First the sound disappears, and then the show stops and I get booted back to the main menu. This has happened with four completely different tv shows. I never had this problem with the 5th gen. What is going on?
No this is different. I am not pushing the home button. I will be in the middle of watching a video, and first the audio will stop while the video continues for a few more seconds, and then I will suddenly be bounced back to the main menu. No buttons pushed. Like it's crashing or something.
-
Hi,
I dont have data in "Client status summary" report for servers in server collection, but get data from our Windows 7?
So and idea of way I dont get data from or servers? Missing client setting for servers?
/SaiTechHi,
I do see the server in Server collections in "Monitoring--Client Status--Client Activity" but not in reports like "Clients with failed client check details" i get "No Data Available"?
/SaiTech -
Seeking best practice for disaster recovery for osx server
I am seeking a solid disaster recovery solution. I would be happy if it complements Time Machine, but I don't require that.
I use DAR2 for the linux systems, but with the aid of nice UI provided by the distro vendor. It provides all the files necessary to follow up a clean base OS install with a file restore to provide a full recovery from a disaster.
I just placed a new Mac Mini Server with the Promise Tech DS4600 in service, so I am eager to put a plan in place.
What do other Mac OS Server users do?
I would be most grateful for links to articles, products and suggestions.For anyone who comes across this post, here is what I settled on:
The server is a mac mini server and is configured with RAID 1 over the two hard disks. I use DAR to backup the linux boxes to the OSX Server. Carbon Copy Cloner is used to backup the OSX Server to a 2 terabyte storage array.
Hopefully this will suffice for the time being. I continue to look for better approaches. -
RMAN backup and restore for Disaster Recovery
Hi Guys,
I am very new to Oracle and have a question about RMAN backup and restore feature. I am simulating a disaster recovery scenario by having two VMs running oracle 11g, say hosta and hostb, hosta is sort of production db and the other a disaster recovery db (one that will be made primary when disaster occurs). My goal is to backup production db using RMAN and restore it on the other machine. For some reason when I restore the db on hostb, the command restores the previous backup but not the most recent one e.g. I took a backup yesterday (09/20) and applied it to the hostb that worked fine, but when I try to apply a fresh backup from today (09/21) it always picks up the old backup. Here's a dump of the screen:
Starting restore at 21-SEP-11
using channel ORA_DISK_1
channel ORA_DISK_1: starting datafile backup set restore
channel ORA_DISK_1: specifying datafile(s) to restore from backup set
channel ORA_DISK_1: restoring datafile 00001 to /oracle/app/dev/oradata/forums/s
ystem01.dbf
channel ORA_DISK_1: restoring datafile 00002 to /oracle/app/dev/oradata/forums/s
ysaux01.dbf
channel ORA_DISK_1: restoring datafile 00003 to /oracle/app/dev/oradata/forums/u
ndotbs01.dbf
channel ORA_DISK_1: restoring datafile 00004 to /oracle/app/dev/oradata/forums/u
sers01.dbf
channel ORA_DISK_1: reading from backup piece /oracle/app/dev/flash_recovery_are
a/FORUMS/backupset/o1_mf_nnnd0_TAG20110920T040950_77jx3zk7_.bkp
channel ORA_DISK_1: piece handle=/oracle/app/dev/flash_recovery_area/FORUMS/back
upset/o1_mf_nnnd0_TAG20110920T040950_77jx3zk7_.bkp tag=TAG20110920T040950
channel ORA_DISK_1: restored backup piece 1
channel ORA_DISK_1: restore complete, elapsed time: 00:01:05
Finished restore at 21-SEP-11
Notice that it reads the backup piece from this location /oracle/app/dev/flash_recovery_are
a/FORUMS/backupset/
whereas my latest backups are stored at a different location.
I am executing following steps at the RMAN prompt on hosta and hostb:
hosta (production site)
backup as compressed backupset database plus archivelog
backup current controlfile format'/oracle/oracle_bkup/ctl_%U'
backup spfile
hostb (Disaster site)
set dbid=13732232063
startup force nomount
restore spfile to '/oracle/app/dev/product/11.2.0/dbhome_1/dbs/spfileforums.ora' from '/export/home/dev/restore_db/backupset/2011_09_21/o1_mf_nnsnf_TAG20110921T114945_77ndg9ys_.bkp'
shutdown immediate
/* create a init<db_name>.ora file with SPFILE= /oracle/app/dev/product/11.2.0/dbhome_1/dbs/spfileforums.ora */
startup force pfile='/export/home/dev/restore_db/initforums.ora' nomount
restore controlfile from '/export/home/dev/restore_db/backupset/2011_09_21/ctl_1hmn3mic_1_1'
/* restart rman here */
quit
alter database mount;
catalog start with '/export/home/dev/restore_db/backupset/2011_09_21' noprompt;
/* call the next two commands on run */
restore database;
recover database;
alter database open resetlogs
quit
Any help will be greatly appreciated.
Thanks,
RajeshThanks guys, I really appreciate all your help here. I redid everything all over again to get all the information you guys wanted. Since I noticed that more eyes are looking into this I am going to reiterate my steps one more time followed by specific answers to questions. My first backup on Host B is located under ..../restore_db/backupset whereas the subsequent one is under .../restore_db/backupset/backupset2.
I take backup on Host A using:
rman target /
backup as compressed backupset database plus archivelog;
backup spfile;
quit;
I restore the backup on Host B using:
set dbid=13732232063;
startup force nomount;
restore spfile to '/oracle/app/dev/product/11.2.0/dbhome_1/dbs/spfileforums.ora' from '/export/home/dev/restore_db/backupset/o1_mf_nnsnf_TAG20110928T171830_787gbpxh_.bkp'
shutdown immediate;
startup force nomount;
restore controlfile from '/export/home/dev/restore_db/backupset/o1_mf_ncsnf_TAG20110928T171638_787gbkxn_.bkp'
quit;
/* restart rman here */
alter database mount;
catalog start with '/export/home/dev/restore_db/backupset' noprompt;
restore database;
recover database;
alter database open resetlogs;
quit;
I take another backup on Host A using (notice no spfile backup this time):
backup as compressed backupset database plus archivelog;
quit;
I restore the database on Host B using:
alter database mount;
catalog start with '/export/home/dev/restore_db/backupset/backupset2' noprompt;
recover database;
alter database open;
quit;
Output of List Backup of database (I have done this after I recovered the second time, also note that it is referring to backupset2 which is were my second backup is stored)
RMAN> list backup of database;
using target database control file instead of recovery catalog
List of Backup Sets
===================
BS Key Type LV Size Device Type Elapsed Time Completion Time
89 Full 261.87M DISK 00:01:37 28-SEP-11
BP Key: 91 Status: AVAILABLE Compressed: YES Tag: TAG20110928T171638
Piece Name: /export/home/dev/restore_db/backupset/o1_mf_nnndf_TAG2011092
8T171638_787g77rx_.bkp
List of Datafiles in backup set 89
File LV Type Ckp SCN Ckp Time Name
1 Full 1813849 28-SEP-11 /oracle/app/dev/oradata/forums/system01.dbf
2 Full 1813849 28-SEP-11 /oracle/app/dev/oradata/forums/sysaux01.dbf
3 Full 1813849 28-SEP-11 /oracle/app/dev/oradata/forums/undotbs01.dbf
4 Full 1813849 28-SEP-11 /oracle/app/dev/oradata/forums/users01.dbf
BS Key Type LV Size Device Type Elapsed Time Completion Time
97 Full 259.16M DISK 00:00:00 28-SEP-11
BP Key: 100 Status: AVAILABLE Compressed: YES Tag: TAG20110928T18352
7
Piece Name: /export/home/dev/restore_db/backupset/backupset2/o1_mf_nnndf
TAG20110928T183527787lv0nb_.bkp
List of Datafiles in backup set 97
File LV Type Ckp SCN Ckp Time Name
1 Full 1816853 28-SEP-11 /oracle/app/dev/oradata/forums/system01.dbf
2 Full 1816853 28-SEP-11 /oracle/app/dev/oradata/forums/sysaux01.dbf
3 Full 1816853 28-SEP-11 /oracle/app/dev/oradata/forums/undotbs01.dbf
4 Full 1816853 28-SEP-11 /oracle/app/dev/oradata/forums/users01.dbf
Output of list backup (done after restoring the control file)
RMAN> list backup;
BS Key Size Device Type Elapsed Time Completion Time
87 89.20M DISK 00:00:26 28-SEP-11
BP Key: 87 Status: AVAILABLE Compressed: YES Tag: TAG20110928T171526
Piece Name: /oracle/app/dev/flash_recovery_area/FORUMS/backupset/2011_09
_28/o1_mf_annnn_TAG20110928T171526_787g50bm_.bkp
List of Archived Logs in backup set 87
Thrd Seq Low SCN Low Time Next SCN Next Time
1 34 1302253 20-SEP-11 1306439 20-SEP-11
1 35 1306439 20-SEP-11 1307647 20-SEP-11
1 36 1307647 20-SEP-11 1307701 20-SEP-11
1 37 1307701 20-SEP-11 1311393 20-SEP-11
1 38 1311393 20-SEP-11 1311511 20-SEP-11
1 39 1311511 20-SEP-11 1332479 20-SEP-11
1 40 1332479 20-SEP-11 1344418 20-SEP-11
1 41 1344418 20-SEP-11 1350409 20-SEP-11
1 42 1350409 20-SEP-11 1350449 20-SEP-11
1 43 1350449 20-SEP-11 1350854 21-SEP-11
1 44 1350854 21-SEP-11 1350895 21-SEP-11
1 45 1350895 21-SEP-11 1353114 21-SEP-11
1 46 1353114 21-SEP-11 1353254 21-SEP-11
1 47 1353254 21-SEP-11 1353865 21-SEP-11
1 48 1353865 21-SEP-11 1353988 21-SEP-11
1 49 1353988 21-SEP-11 1375403 21-SEP-11
1 50 1375403 21-SEP-11 1376149 21-SEP-11
1 51 1376149 21-SEP-11 1376206 21-SEP-11
1 52 1376206 21-SEP-11 1376246 21-SEP-11
1 53 1376246 21-SEP-11 1379990 21-SEP-11
1 54 1379990 21-SEP-11 1380229 21-SEP-11
1 55 1380229 21-SEP-11 1380266 21-SEP-11
1 56 1380266 21-SEP-11 1380528 21-SEP-11
1 57 1380528 21-SEP-11 1380724 21-SEP-11
1 58 1380724 21-SEP-11 1380861 21-SEP-11
1 59 1380861 21-SEP-11 1381033 21-SEP-11
1 60 1381033 21-SEP-11 1381077 21-SEP-11
1 61 1381077 21-SEP-11 1402243 22-SEP-11
1 62 1402243 22-SEP-11 1423341 22-SEP-11
1 63 1423341 22-SEP-11 1435456 22-SEP-11
1 64 1435456 22-SEP-11 1454415 23-SEP-11
1 65 1454415 23-SEP-11 1490903 23-SEP-11
1 66 1490903 23-SEP-11 1491266 23-SEP-11
1 67 1491266 23-SEP-11 1491347 23-SEP-11
1 68 1491347 23-SEP-11 1492761 23-SEP-11
1 69 1492761 23-SEP-11 1492891 23-SEP-11
1 70 1492891 23-SEP-11 1493678 23-SEP-11
1 71 1493678 23-SEP-11 1493704 23-SEP-11
1 72 1493704 23-SEP-11 1494741 23-SEP-11
1 73 1494741 23-SEP-11 1494790 23-SEP-11
1 74 1494790 23-SEP-11 1510154 23-SEP-11
1 75 1510154 23-SEP-11 1514286 23-SEP-11
1 76 1514286 23-SEP-11 1531967 24-SEP-11
1 77 1531967 24-SEP-11 1543266 24-SEP-11
1 78 1543266 24-SEP-11 1558427 24-SEP-11
1 79 1558427 24-SEP-11 1566924 24-SEP-11
1 80 1566924 24-SEP-11 1578292 24-SEP-11
1 81 1578292 24-SEP-11 1596894 25-SEP-11
BS Key Size Device Type Elapsed Time Completion Time
88 84.03M DISK 00:00:30 28-SEP-11
BP Key: 88 Status: AVAILABLE Compressed: YES Tag: TAG20110928T171526
Piece Name: /oracle/app/dev/flash_recovery_area/FORUMS/backupset/2011_09
_28/o1_mf_annnn_TAG20110928T171526_787g63s9_.bkp
List of Archived Logs in backup set 88
Thrd Seq Low SCN Low Time Next SCN Next Time
1 82 1596894 25-SEP-11 1609028 25-SEP-11
1 83 1609028 25-SEP-11 1622303 25-SEP-11
1 84 1622303 25-SEP-11 1626430 25-SEP-11
1 85 1626430 25-SEP-11 1634486 25-SEP-11
1 86 1634486 25-SEP-11 1648398 25-SEP-11
1 87 1648398 25-SEP-11 1669259 26-SEP-11
1 88 1669259 26-SEP-11 1686820 26-SEP-11
1 89 1686820 26-SEP-11 1686959 26-SEP-11
1 90 1686959 26-SEP-11 1689168 26-SEP-11
1 91 1689168 26-SEP-11 1704759 26-SEP-11
1 92 1704759 26-SEP-11 1719597 27-SEP-11
1 93 1719597 27-SEP-11 1740407 27-SEP-11
1 94 1740407 27-SEP-11 1750125 27-SEP-11
1 95 1750125 27-SEP-11 1765592 27-SEP-11
1 96 1765592 27-SEP-11 1781498 28-SEP-11
1 97 1781498 28-SEP-11 1802311 28-SEP-11
1 98 1802311 28-SEP-11 1811009 28-SEP-11
1 99 1811009 28-SEP-11 1813811 28-SEP-11
BS Key Type LV Size Device Type Elapsed Time Completion Time
89 Full 261.87M DISK 00:01:37 28-SEP-11
BP Key: 89 Status: AVAILABLE Compressed: YES Tag: TAG20110928T171638
Piece Name: /oracle/app/dev/flash_recovery_area/FORUMS/backupset/2011_09
_28/o1_mf_nnndf_TAG20110928T171638_787g77rx_.bkp
List of Datafiles in backup set 89
File LV Type Ckp SCN Ckp Time Name
1 Full 1813849 28-SEP-11 /oracle/app/dev/oradata/forums/system01.dbf
2 Full 1813849 28-SEP-11 /oracle/app/dev/oradata/forums/sysaux01.dbf
3 Full 1813849 28-SEP-11 /oracle/app/dev/oradata/forums/undotbs01.dbf
4 Full 1813849 28-SEP-11 /oracle/app/dev/oradata/forums/users01.dbf -
DR (Disaster Recovery) server installation.
Dear Experts,
We have one server for BI PRD. We are not using it at the moment. We wish
to carry out DR (Disaster Recovery) trial on this server. Regarding thiswe have following queries :
1. Do we require separate SAP License key for this server when setup forDR (already SAP license key exists for it as BI server)
2. We will re-install BI on the same server after our DR test so whetherwe need to regenerate License key for BI or not?
3. We have two R/3 PRD servers in HACMP mode in SAN. Can we take the
backup of R/3 PRD and restore it on DR Trial Server? If yes, whether we
will face any problem for existing PRD server?
4. Whether Existing PRD and Trial DR Server will clash or hang since
these will be in the same local network and SAN
Please advise.
Regards,
Kailas Padwale.
BASIS Team.Hi,
As per your query you have not mentiones here what is your opreting system and whcih SAP verson you are using. If any one need related to implimentaion then we keep in mind to os,sap version,database etc.
Your Question: If you want to DR of PRD then you have to get my answer.
1. Do we require separate SAP License key for this server when setup forDR (already SAP license key exists for it as BI server)
ANS= Yes you can generated from SAP Site becasue now this is BI and you want to DR but for this you have not paid any thing to SAP its free.
2. We will re-install BI on the same server after our DR test so whetherwe need to regenerate License key for BI or not?
ANS=NO becasue you have to use only PRD copy you can not run BI here otherwise how can you say this is DR server. DR Server means you can copy in existing running server, in case you running server get down then within short period you can provide the solution. After rectificaton actual server you will shift in old one.
3. We have two R/3 PRD servers in HACMP mode in SAN. Can we take the
backup of R/3 PRD and restore it on DR Trial Server? If yes, whether we
will face any problem for existing PRD server?
ANS=You can restore backup but you have to take backup only one PRD server and restore it in DR. Just chang your IP Address and rest can be same. You will not face any issue on this if you run in the same network. I will recmond if you use database in DR server itself then good for your running system will not impect.
4. Whether Existing PRD and Trial DR Server will clash or hang since
these will be in the same local network and SAN
ANS= No because you will use seprate IP address and data will be in DR server not in SAN.
In case you need more help, pls get in touch.
Anil -
Need help for Disaster Recovery setup and configuration
Hi Gurus.
We are planning to have disaster recovery test plan. Normally we setup our network at another site and then restore data there and then do configuration and setup to run SAP system to new network.
But this is little more time consuming. We are planning to do something which will might save our time.
We want to create one Application instance on Central instance on current production server. This instance will be "deactivated" and will not run on production server.
When we will do the disaster recovery, we will restore CI filesystem to Disaster recovery network. That time this new application instance will aslo get copied. Once this is done, we just need to go to this instance and start SAP System. This way we will save our time of configuring the new instance and then starting it.
e.g
Production host -> prdhost1
Central Instance -> /usr/sap/P01/DVEBMGS00
and it's subdirectory: data, work, log, sec
create new application instance -> /usr/sap/P01/D03
and it's subdirectory: data, work, log, sec
create new instance profile -> P01_D03_prdhost1, START_D03_prdhost1
this configuration will be created but SAP instance will not be started. It will be copied to Disaster Recovery new site and in that new network , there we can start this new application instance.
Please let me know if we can do that ? if yes, are we going to face any issue in production?
Other than mentioned above, what FileSystem we need to take care for creating new instance?
Any help will be highly appreciated.
Thanks in advance
Best Regards,
Basis CKHi!
Sorry but your scenario is a little bit confusing.
Let me guess if I understood, you want to configure a "virtual" instance to be able to use it in case of DR.
I don't advise you to do things that way. Why not use virtual hosts and virtual instances like we do when implementing instances within a cluster or metrocluster.
You must have the license from DR server installed. I you use virtual hosts all DR issues like printers, logon groups, RFC groups, etc... will be solved.
If you use virtual hosts and virtual instances all you need to do is replicate the environment into DR site, restore the system and start production.
Of course... you are using UNIX and within UNIX world all these things are much easier.
Bear in mind that if you have JAVA instances then I think this is the only recommended procedure.
Cheers,
FF
Maybe you are looking for
-
I have an iPad mini and an iPad 2. I can print email to my HP 6510 from the mini, but NOT from the iPad 2. Both are on the same wi-fi network. I have tried everything I can do including unplugging everything, restarting, etc. Can anyone help?
-
Is it possible to implement a truncation of text (a "more/less") function for paragraphs in PDFs?
I work at a center for public service and we're trying to make our service handbook more user friendly. However, we're not experts when it comes to using Adobe Acrobat X Pro. Instead of having to scroll through the many pages of the handbook, we woul
-
Below in code shown I want do a count of trip_plan_key and want to include that in where clause as shown below..But I cant use the count in where clause.. any other workaround.. SELECT FOMS.MV_TASK_VIEW_OBJECT.TRIP_PLAN_KEY, FOMS.MV_TASK_VIEW_OBJECT.
-
NoClassDefFoundError while accessing JMS Queue from JDev 10.1.3.3
Hi, I'm trying to get a handle of a JMS queue, which resides on Oracle App Server 10.1.3.4, from a Java Program which I'm trying to run from JDeveloper 10.1.3.3. I'm trying to make an RMI connection to the App server from JDeveloper by passing follow
-
Hi everyone, i'm not sure where to post this so sorry if this is the wrong place. My mac's (ibook G4 late '04) dvd player sometimes just wont play some dvds, mostly this occurs with dvds with dvd rom features (eg. The Matrix), is there any way to get