Dispatcher stops after starting SAP and turning from green to grey
After starting SAP on the SAP Console, the dispatcher turns from green to grey and logging on to SAP is not possible. Below is the developer trace file for the process:
SAPPRD\saploc\PRD\DVEBMGS00\work\dev_disp
trc file: "dev_disp", trc level: 1, release: "640"
Tue Mar 27 14:47:21 2007
kernel runs with dp version 128(ext=102) (@(#) DPLIB-INT-VERSION-128)
length of sys_adm_ext is 312 bytes
systemid 560 (PC with Windows NT)
relno 6400
patchlevel 0
patchno 43
intno 20020600
make: multithreaded, ASCII
pid 3732
***LOG Q00=> DpSapEnvInit, DPStart (00 3732) [dpxxdisp.c 1100]
shared lib "dw_xml.dll" version 43 successfully loaded
shared lib "dw_xtc.dll" version 43 successfully loaded
shared lib "dw_stl.dll" version 43 successfully loaded
shared lib "dw_gui.dll" version 43 successfully loaded
Tue Mar 27 14:47:34 2007
WARNING => DpNetCheck: NiHostToAddr(www.doesnotexist0000.qqq.nxst) took 13 seconds
Tue Mar 27 14:47:51 2007
WARNING => DpNetCheck: NiAddrToHost(1.0.0.0) took 17 seconds
***LOG GZZ=> 2 possible network problems detected - check tracefile and adjust the DNS
settings [dpxxtool2.c 3886]
MtxInit: -2 0 0
DpSysAdmExtInit: ABAP is active
DpSysAdmExtInit: JAVA is not active
DpShMCreate: sizeof(wp_adm) 21528 (828)
DpShMCreate: sizeof(tm_adm) 2219848 (11044)
DpShMCreate: sizeof(wp_ca_adm) 18000 (60)
DpShMCreate: sizeof(appc_ca_adm) 6000 (60)
DpShMCreate: sizeof(comm_adm) 192000 (384)
DpShMCreate: sizeof(vmc_adm) 0 (320)
DpShMCreate: sizeof(wall_adm) (22440/34344/56/100)
DpShMCreate: SHM_DP_ADM_KEY (addr: 04BA0040, size: 2520320)
DpShMCreate: allocated sys_adm at 04BA0040
DpShMCreate: allocated wp_adm at 04BA17A8
DpShMCreate: allocated tm_adm_list at 04BA6BC0
DpShMCreate: allocated tm_adm at 04BA6BE8
DpShMCreate: allocated wp_ca_adm at 04DC4B30
DpShMCreate: allocated appc_ca_adm at 04DC9180
DpShMCreate: allocated comm_adm_list at 04DCA8F0
DpShMCreate: allocated comm_adm at 04DCA908
DpShMCreate: allocated vmc_adm_list at 04DF9708
DpShMCreate: system runs without vmc_adm
DpShMCreate: allocated ca_info at 04DF9730
DpShMCreate: allocated wall_adm at 04DF9738
MBUF state OFF
EmInit: MmSetImplementation( 2 ).
<ES> client 0 initializing ....
<ES> InitFreeList
<ES> block size is 1024 kByte.
Using implementation flat
<EsNT> Memory Reset disabled as NT default
<ES> 2264 blocks reserved for free list.
ES initialized.
Tue Mar 27 14:47:52 2007
rdisp/http_min_wait_dia_wp : 1 -> 1
***LOG Q0K=> DpMsAttach, mscon ( SAPPRD) [dpxxdisp.c 9736]
CCMS: Initalizing shared memory of size 40000000 for monitoring segment.
CCMS: start to initalize 3.X shared alert area (first segment).
DpMsgAdmin: Set release to 6400, patchlevel 0
MBUF state PREPARED
MBUF component UP
DpMBufHwIdSet: set Hardware-ID
***LOG Q1C=> DpMBufHwIdSet [dpxxmbuf.c 1025]
DpMsgAdmin: Set patchno for this platform to 43
Release check o.K.
Tue Mar 27 14:48:32 2007
ERROR => W0 (pid 5396) died [dpxxdisp.c 12187]
ERROR => W1 (pid 1536) died [dpxxdisp.c 12187]
ERROR => W2 (pid 5404) died [dpxxdisp.c 12187]
ERROR => W3 (pid 1520) died [dpxxdisp.c 12187]
ERROR => W4 (pid 4208) died [dpxxdisp.c 12187]
ERROR => W5 (pid 3584) died [dpxxdisp.c 12187]
ERROR => W6 (pid 4512) died [dpxxdisp.c 12187]
ERROR => W7 (pid 5484) died [dpxxdisp.c 12187]
ERROR => W8 (pid 5488) died [dpxxdisp.c 12187]
ERROR => W9 (pid 5500) died [dpxxdisp.c 12187]
ERROR => W10 (pid 888) died [dpxxdisp.c 12187]
ERROR => W11 (pid 5512) died [dpxxdisp.c 12187]
my types changed after wp death/restart 0xbf --> 0xbe
ERROR => W12 (pid 5520) died [dpxxdisp.c 12187]
ERROR => W13 (pid 5528) died [dpxxdisp.c 12187]
ERROR => W14 (pid 5532) died [dpxxdisp.c 12187]
ERROR => W15 (pid 5536) died [dpxxdisp.c 12187]
ERROR => W16 (pid 5468) died [dpxxdisp.c 12187]
my types changed after wp death/restart 0xbe --> 0xbc
ERROR => W17 (pid 5564) died [dpxxdisp.c 12187]
my types changed after wp death/restart 0xbc --> 0xb8
ERROR => W18 (pid 1676) died [dpxxdisp.c 12187]
ERROR => W19 (pid 5652) died [dpxxdisp.c 12187]
ERROR => W20 (pid 4704) died [dpxxdisp.c 12187]
ERROR => W21 (pid 1796) died [dpxxdisp.c 12187]
ERROR => W22 (pid 5568) died [dpxxdisp.c 12187]
my types changed after wp death/restart 0xb8 --> 0xb0
ERROR => W23 (pid 6084) died [dpxxdisp.c 12187]
my types changed after wp death/restart 0xb0 --> 0xa0
ERROR => W24 (pid 5704) died [dpxxdisp.c 12187]
ERROR => W25 (pid 3580) died [dpxxdisp.c 12187]
my types changed after wp death/restart 0xa0 --> 0x80
DP_FATAL_ERROR => DpWPCheck: no more work processes
DISPATCHER EMERGENCY SHUTDOWN ***
increase tracelevel of WPs
killing W0-5396 (SIGUSR2)
ERROR => DpWpKill(5396, SIGUSR2) failed [dpxxtool.c 2468]
killing W1-1536 (SIGUSR2)
ERROR => DpWpKill(1536, SIGUSR2) failed [dpxxtool.c 2468]
killing W2-5404 (SIGUSR2)
ERROR => DpWpKill(5404, SIGUSR2) failed [dpxxtool.c 2468]
killing W3-1520 (SIGUSR2)
ERROR => DpWpKill(1520, SIGUSR2) failed [dpxxtool.c 2468]
killing W4-4208 (SIGUSR2)
ERROR => DpWpKill(4208, SIGUSR2) failed [dpxxtool.c 2468]
killing W5-3584 (SIGUSR2)
ERROR => DpWpKill(3584, SIGUSR2) failed [dpxxtool.c 2468]
killing W6-4512 (SIGUSR2)
ERROR => DpWpKill(4512, SIGUSR2) failed [dpxxtool.c 2468]
killing W7-5484 (SIGUSR2)
ERROR => DpWpKill(5484, SIGUSR2) failed [dpxxtool.c 2468]
killing W8-5488 (SIGUSR2)
ERROR => DpWpKill(5488, SIGUSR2) failed [dpxxtool.c 2468]
killing W9-5500 (SIGUSR2)
ERROR => DpWpKill(5500, SIGUSR2) failed [dpxxtool.c 2468]
killing W10-888 (SIGUSR2)
ERROR => DpWpKill(888, SIGUSR2) failed [dpxxtool.c 2468]
killing W11-5512 (SIGUSR2)
ERROR => DpWpKill(5512, SIGUSR2) failed [dpxxtool.c 2468]
killing W12-5520 (SIGUSR2)
ERROR => DpWpKill(5520, SIGUSR2) failed [dpxxtool.c 2468]
killing W13-5528 (SIGUSR2)
ERROR => DpWpKill(5528, SIGUSR2) failed [dpxxtool.c 2468]
killing W14-5532 (SIGUSR2)
ERROR => DpWpKill(5532, SIGUSR2) failed [dpxxtool.c 2468]
killing W15-5536 (SIGUSR2)
ERROR => DpWpKill(5536, SIGUSR2) failed [dpxxtool.c 2468]
killing W16-5468 (SIGUSR2)
ERROR => DpWpKill(5468, SIGUSR2) failed [dpxxtool.c 2468]
killing W17-5564 (SIGUSR2)
ERROR => DpWpKill(5564, SIGUSR2) failed [dpxxtool.c 2468]
killing W18-1676 (SIGUSR2)
ERROR => DpWpKill(1676, SIGUSR2) failed [dpxxtool.c 2468]
killing W19-5652 (SIGUSR2)
ERROR => DpWpKill(5652, SIGUSR2) failed [dpxxtool.c 2468]
killing W20-4704 (SIGUSR2)
ERROR => DpWpKill(4704, SIGUSR2) failed [dpxxtool.c 2468]
killing W21-1796 (SIGUSR2)
ERROR => DpWpKill(1796, SIGUSR2) failed [dpxxtool.c 2468]
killing W22-5568 (SIGUSR2)
ERROR => DpWpKill(5568, SIGUSR2) failed [dpxxtool.c 2468]
killing W23-6084 (SIGUSR2)
ERROR => DpWpKill(6084, SIGUSR2) failed [dpxxtool.c 2468]
killing W24-5704 (SIGUSR2)
ERROR => DpWpKill(5704, SIGUSR2) failed [dpxxtool.c 2468]
killing W25-3580 (SIGUSR2)
ERROR => DpWpKill(3580, SIGUSR2) failed [dpxxtool.c 2468]
NiWait: sleep (10000 msecs) ...
NiISelect: timeout 10000 ms
NiISelect: maximum fd=1521
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Tue Mar 27 14:48:42 2007
NiISelect: TIMEOUT occured (10000 ms)
dump system status
Workprocess Table (long) Tue Mar 27 13:48:42 2007
========================
No Ty. Pid Status Cause Start Err Sem CPU Time Program Cl User Action
Table
0 DIA 5396 Ended no 1 0 0
1 DIA 1536 Ended no 1 0 0
2 DIA 5404 Ended no 1 0 0
3 DIA 1520 Ended no 1 0 0
4 DIA 4208 Ended no 1 0 0
5 DIA 3584 Ended no 1 0 0
6 DIA 4512 Ended no 1 0 0
7 DIA 5484 Ended no 1 0 0
8 DIA 5488 Ended no 1 0 0
9 DIA 5500 Ended no 1 0 0
10 DIA 888 Ended no 1 0 0
11 DIA 5512 Ended no 1 0 0
12 UPD 5520 Ended no 1 0 0
13 UPD 5528 Ended no 1 0 0
14 UPD 5532 Ended no 1 0 0
15 UPD 5536 Ended no 1 0 0
16 UPD 5468 Ended no 1 0 0
17 ENQ 5564 Ended no 1 0 0
18 BTC 1676 Ended no 1 0 0
19 BTC 5652 Ended no 1 0 0
20 BTC 4704 Ended no 1 0 0
21 BTC 1796 Ended no 1 0 0
22 BTC 5568 Ended no 1 0 0
23 SPO 6084 Ended no 1 0 0
24 UP2 5704 Ended no 1 0 0
25 UP2 3580 Ended no 1 0 0
Dispatcher Queue Statistics Tue Mar 27 13:48:42 2007
===========================
--------++++--
+
Typ
now
high
max
writes
reads
--------++++--
+
NOWP
0
3
2000
10
10
--------++++--
+
DIA
6
6
2000
6
0
--------++++--
+
UPD
0
0
2000
0
0
--------++++--
+
ENQ
0
0
2000
0
0
--------++++--
+
BTC
0
0
2000
0
0
--------++++--
+
SPO
0
0
2000
0
0
--------++++--
+
UP2
0
0
2000
0
0
--------++++--
+
max_rq_id 14
wake_evt_udp_now 0
wake events total 9, udp 8 ( 88%), shm 1 ( 11%)
since last update total 9, udp 8 ( 88%), shm 1 ( 11%)
Dump of tm_adm structure: Tue Mar 27 13:48:42 2007
=========================
Term uid man user term lastop mod wp ta a/i (modes)
RM-T26, U27, , SAPPRD, 14:48:24, M0, W-1, , 1/0
Workprocess Comm. Area Blocks Tue Mar 27 13:48:42 2007
=============================
Slots: 300, Used: 2, Max: 1
--------++--
+
id
owner
pid
eyecatcher
--------++--
+
0
DISPATCHER
-1
WPCAAD000
1
DISPATCHER
-1
WPCAAD001
NiWait: sleep (5000 msecs) ...
NiISelect: timeout 5000 ms
NiISelect: maximum fd=1521
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Tue Mar 27 14:48:47 2007
NiISelect: TIMEOUT occured (5000 ms)
Shutdown server ...
DpJ2eeDisableRestart
DpModState: buffer in state MBUF_PREPARED
NiBufSend starting
NiIWrite: write 110, 1 packs, MESG_IO, hdl 3, data complete
MsINiWrite: sent 110 bytes
MsIModState: change state to SHUTDOWN
DpModState: change server state from STARTING to SHUTDOWN
Switch off Shared memory profiling
ShmProtect( 57, 3 )
ShmProtect(SHM_PROFILE, SHM_PROT_RW
ShmProtect( 57, 1 )
ShmProtect(SHM_PROFILE, SHM_PROT_RD
DpWakeUpWps: wake up all wp's
Stop work processes...
Stop gateway
killing process (1844) (SOFT_KILL)
Stop icman
killing process (5376) (SOFT_KILL)
Terminate gui connections
send SHUTDOWN to REM TM 26
blks_in_queue/wp_ca_blk_no/wp_max_no = 2/300/26
LOCK WP ca_blk 2
return errno (-17) to T26
errormsg without overhead: take mode 0
NiBufIAlloc: malloc NiBufadm, to 0 bytes
try to send 14 to M0
NiBufSend starting
NiIWrite: write 14, 1 packs, MESG_IO, hdl 7, data complete
REL WP ca_blk 2
set status of T26 to TM_DISCONNECTED
NiSelClear: removed hdl 7 from selectset
DpDelSocketInfo: del info for socket 7 (type=3)
NiBufClose: clear extensions for hdl 7
NiBufSetStat: bufstat of hdl 7 changed from OK to OFF
NiICloseHandle: shutdown and close hdl 7 / socket 1216
dp_tm_adm[26].stat = DP_SLOT_FREE
DpGetSchedule: next schedule 1175003332
DpGetSchedule: no schedule found
DpITmSlotRelease: release slot 26
DpListInsert: insert elem 26 into tmadm_free_list (at begin)
DpListInsert: 175 elems in tmadm_free_list
DpListRemove: remove elem 26 from tmadm_inuse_list
DpListRemove: 26 elems in tmadm_inuse_list
[DpProcDied] Process lives (PID:1844 HANDLE:1500)
waiting for termination of gateway
NiWait: sleep (1000 msecs) ...
NiISelect: timeout 1000 ms
NiISelect: maximum fd=1521
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Tue Mar 27 14:48:48 2007
NiISelect: TIMEOUT occured (1000 ms)
[DpProcDied] Process died (PID:1844 HANDLE:1500)
[DpProcDied] Process died (PID:5376 HANDLE:1492)
DpHalt: cancel all lcom connections
MPI CancelAll 2 -> 0
MPI DeleteAll 2 -> 0
NiIMyHostName: hostname = 'SAPPRD'
AdGetSelfIdentRecord: >
<
AdCvtRecToExt: opcode 60 (AD_SELFIDENT), ser 0, ex 0, errno 0
AdCvtRecToExt: opcode 4 (AD_STARTSTOP), ser 0, ex 0, errno 0
DpConvertRequest: net size = 163 bytes
NiBufSend starting
NiIWrite: write 562, 1 packs, MESG_IO, hdl 3, data complete
MsINiWrite: sent 562 bytes
send msg (len 110+452) to name -, type 4, key -
detach from message server
***LOG Q0M=> DpMsDetach, ms_detach () [dpxxdisp.c 9962]
NiBufSend starting
NiIWrite: write 110, 1 packs, MESG_IO, hdl 3, data complete
MsINiWrite: sent 110 bytes
MsIDetach: send logout to msg_server
MsIDetach: call exit function
DpMsShutdownHook called
NiSelClear: removed hdl 3 from selectset
MBUF state OFF
AdGetSelfIdentRecord: >
<
AdCvtRecToExt: opcode 60 (AD_SELFIDENT), ser 0, ex 0, errno 0
AdCvtRecToExt: opcode 40 (AD_MSBUF), ser 0, ex 0, errno 0
AdCvtRecToExt: opcode 40 (AD_MSBUF), ser 0, ex 0, errno 0
blks_in_queue/wp_ca_blk_no/wp_max_no = 2/300/26
LOCK WP ca_blk 2
make DISP owner of wp_ca_blk 2
DpRqPutIntoQueue: put request into queue (reqtype 1, prio LOW, rq_id 20)
MBUF component DOWN
NiBufClose: clear extensions for hdl 3
NiBufSetStat: bufstat of hdl 3 changed from OK to OFF
NiICloseHandle: shutdown and close hdl 3 / socket 1504
MsIDetach: detach MS-system
EsCleanup ....
***LOG Q05=> DpHalt, DPStop ( 3732) [dpxxdisp.c 8495]
Good Bye .....
what is the name of your hostname? 'pun-idmqa-vm1'?
Try changing the hostname for another one with 8 characters...
good luck,
Similar Messages
-
I got my Dads old iPhone 3GS for Christmas and reset it to its factory settings. It had this problem with my Dad to, thats why he got a new phone. It was claiming that the battery was dead when I opened certain apps eventhough it had plenty of battery, It made me charge it and then said it was plenty charged. Why? That happened multiple times. That's what happened to my Dad as well. This however, is me only. O.K. so, the other day, it did it's battery dead shutdown thing, so I plugged it in, but it kept starting up, then shutting down again, starting up, and shutting down again. Now I've left it on the charger for about a days, it's not on the charger now, and it won't turn on. Help!!!!!!
Basic troubleshooting from the User's Guide is reset, restart, restore (first from backup then as new). Try each of these in order until the issue is resolved.
If the issue persists, take the device to Apple for evaluation and possible replacement. -
CC stops after start up and won't finish initializing
It won't finish cc for desktop
http://myleniumerrors.com/installation-and-licensing-problems/creative-cloud-error-codes-w ip/
http://helpx.adobe.com/creative-cloud/kb/failed-install-creative-cloud-desktop.html
or
A chat session where an agent may remotely look inside your computer may help
Creative Cloud chat support (all Creative Cloud customer service issues)
http://helpx.adobe.com/x-productkb/global/service-ccm.html -
I have a password problem. After importing data and settings from one MacBook Pro to a new one, I have to put my iCloud password in when re-starting the new computer, but the password from the old computer in when waking the computer from sleep. I want to use my iCloud password on both computers consistently. How can I fix this?
The only other place to change a password for the computer login is in Users & Groups preferences. But I don't really know enough here to fix your problem. You can try fixing the keychain:
iCloud- Frequently asked questions about iCloud Keychain
Tutorial: Resolving Keychain Issues
If you can't access your keychain, or forget your password If you can't get into your keychain file because you've forgotten your password or the keychain file appears to be corrupt, there are a couple of options.
First, if you've forgotten your password, you can use the "Keychain First Aid" utility to make the keychain password the same as the login password. This can be accomplished via the following process:
1. Open Keychain Access (located in Applications/Utilities)
2. Go to the "Keychain Access" menu and select "Preferences"
3. Click the "First Aid" tab
4. Make sure the "Synchronize login keychain password" box is checked
5. Close the Preferences window
6. Go to the "Keychain Access" menu and select "Keychain First Aid"
7. Enter your username and password
8. Click the "Repair" button
The second option is to completely delete your keychain then recreate it. This routine is useful if your keychain appears to be corrupt or otherwise inaccessible. This can be accomplished as follows:
1. Launch Keychain Access (located in Applications/Utilities)
2. Click "Show Keychains" in the lower-left corner of the window.
3. Select the problematic keychain from the left-hand pane.
4. Navigate to the "File" menu and select "Delete Keychain '(name of keychain)'"
5. Check all options for deletion and press "OK"
6. Create a new keychain by going to the "File" menu, then "New" and selecting
"New Keychain"
7. You can now make this keychain your default if you desire by selecting it, then
going to the "File" menu and selecting "Make '(name of keychain)' Default"
Login as root and perform repair In some cases, problems with keychains can only be resolved when logged in as the root user.
First, you want to enable the root user:
1. OS X Mountain Lion: Enable and disable the root user
2. OS X Lion: Enable and disable the root user
3. Mac OS X 10.6: Enabling the root user
4. Enabling and using the "root" user in Mac OS X
After enabling the root user, and logging in under this account, again open Keychain Access. First attempt repairs using Keychain First Aid, and failing that, delete then recreate the keychain as described above while logged in as root.
Persistently asked for stored passwords If you are persistently asked for passwords in various applications that you have specified should be remembered in a keychain, your "login" keychain may not be active for one reason or another.
Navigate to ~/Library/Keychains/ (this is the Library folder inside your user's home folder). Find the file named "login.keychain" and double-click it.
Failing that, select the "login" keychain within the Keychain Access application and make sure it is the default keychain by going to the "File" menu and selecting "Make 'Login' Default"
Turn off Keychain synchronization in applications having problems If specific applications are experiencing issues when accessing password-protected material, the Keychain may be to blame.
The above comes from an article published on MacFixit.com. -
I purchased Fifa13 from the App Store, downloaded it in my pc..,but when i am trying to install it in my ipad frpm the pc, i couldnt do it. The installation process stops after some time and the ipad shows some thing like "can sync..,failed to install fifa13"
What can i do?
btw....,its happeniing only wth the fifa13, installed other apps from pc previously.anybody answer me fast
-
I have had nothing but problems after downloading Lion and turning on ICloud. Can anyone tell if I can delete photos from Photostream and if not why not! it is infuriating
PhotoStream is purely a conduit for transferring pictures added to or taken on one device onto all the others seamlessly. Photos are held there only for 30 days. There is no way of accessing, viewing or deleting individual photos; you can reset the entire Photostream, erasing everything.
http://support.apple.com/kb/HT4890 -
Starting and stopping services of SAP and database
pls tell what are the Starting and stopping services of SAP and database
Hi Ranga,
The services dealing with SAP and database(Ex: Oracle in this case) are:
SAP<SID>_<Instance No.> (For ex: SAPECC_01)
SAPOsCol
Oracle<SID><No>Listener
OracleCSSservice
OracleService<SID>
Reward points if it is helpful##
Thanks & Regards,
Santhosh P
Please change the status to answered if you got the solution...
Message was edited by:
Santhosh Kumar P -
Dispatcher stops while starting J2EE processes
Hi All,
While starting the instance the dispatcher stops while starting J2EE processes.
The contents of <b>dev_ms</b> file are as follows:
trc file: "dev_ms", trc level: 1, release: "700"
[Thr 1260] Fri Aug 10 10:52:00 2007
[Thr 1260] MsSSetTrcLog: trc logging active, max size = 20971520 bytes
systemid 560 (PC with Windows NT)
relno 7000
patchlevel 0
patchno 26
intno 20050900
make: multithreaded, Unicode
pid 3116
[Thr 1260] ***LOG Q01=> MsSInit, MSStart (Msg Server 1 3116) [msxxserv.c 1828]
[Thr 1260] load acl file = D:\usr\sap\EC6\SYS\global\ms_acl_info.DAT
[Thr 1260] MsGetOwnIpAddr: my host addresses are :
[Thr 1260] 1 : [10.112.51.63] hsdnt24s12.noida.hcltech.com (HOSTNAME)
[Thr 1260] 2 : [127.0.0.1] HSDNT24S12.noida.hcltech.com (LOCALHOST)
[Thr 1260] MsHttpInit: full qualified hostname = hsdnt24s12.noida.hcltech.com
[Thr 1260] HTTP logging is switch off
[Thr 1260] set HTTP state to LISTEN
[Thr 1260] MsHttpOwnDomain: own domain[1] = noida.hcltech.com
[Thr 1260] ms/icf_info_server : HSDNT24S12.noida.hcltech.com
[Thr 1260] *** I listen to port sapmsEC6 (3603) ***
[Thr 1260] *** I listen to internal port 3903 (3903) ***
[Thr 1260] *** HTTP port 8103 state LISTEN ***
[Thr 1260] CUSTOMER KEY: >Q0671421507<
[Thr 1260] Fri Aug 10 10:53:40 2007
[Thr 1260] *** ERROR => MsSClientHandle: no server provides service ENQ (4), requested from HSDNT24S12_EC6_03 [msxxserv.c 4680]
Kindly help me out to solve this issue.
Thanking in Advance,
AbhishekHi Santosh,
Contents of <b>dev_ms</b> are as follows:
trc file: "dev_ms", trc level: 1, release: "700"
[Thr 7592] Fri Aug 10 14:16:19 2007
[Thr 7592] MsSSetTrcLog: trc logging active, max size = 20971520 bytes
systemid 560 (PC with Windows NT)
relno 7000
patchlevel 0
patchno 26
intno 20050900
make: multithreaded, Unicode
pid 3580
[Thr 7592] ***LOG Q01=> MsSInit, MSStart (Msg Server 1 3580) [msxxserv.c 1828]
[Thr 7592] load acl file = D:\usr\sap\EC6\SYS\global\ms_acl_info.DAT
[Thr 7592] MsGetOwnIpAddr: my host addresses are :
[Thr 7592] 1 : [10.112.51.63] hsdnt24s12.noida.hcltech.com (HOSTNAME)
[Thr 7592] 2 : [127.0.0.1] HSDNT24S12.noida.hcltech.com (LOCALHOST)
[Thr 7592] MsHttpInit: full qualified hostname = hsdnt24s12.noida.hcltech.com
[Thr 7592] HTTP logging is switch off
[Thr 7592] set HTTP state to LISTEN
[Thr 7592] MsHttpOwnDomain: own domain[1] = noida.hcltech.com
[Thr 7592] ms/icf_info_server : HSDNT24S12.noida.hcltech.com
[Thr 7592] *** I listen to port sapmsEC6 (3603) ***
[Thr 7592] *** I listen to internal port 3903 (3903) ***
[Thr 7592] *** HTTP port 8103 state LISTEN ***
[Thr 7592] CUSTOMER KEY: >Q0671421507<
[Thr 7592] Fri Aug 10 14:17:59 2007
[Thr 7592] *** ERROR => MsSClientHandle: no server provides service ENQ (4), requested from HSDNT24S12_EC6_03 [msxxserv.c 4680]
[Thr 7592] *** ERROR => MsSRead: NiBufReceive (rc=NIECONN_BROKEN) [msxxserv.c 10547]
[Thr 7592] *** ERROR => MsSClientHandle: MsSRead C1 (HSDNT24S12_EC6_03), MSEINTERN [msxxserv.c 4164]
Contents of file <b>dev_w0</b> is as follows:
trc file: "dev_w0", trc level: 1, release: "700"
ACTIVE TRACE LEVEL 1
ACTIVE TRACE COMPONENTS all, MJ
B
B Fri Aug 10 14:16:49 2007
B create_con (con_name=R/3)
B Loading DB library 'D:\usr\sap\EC6\DVEBMGS03\exe\dboraslib.dll' ...
B Library 'D:\usr\sap\EC6\DVEBMGS03\exe\dboraslib.dll' loaded
B Version of 'D:\usr\sap\EC6\DVEBMGS03\exe\dboraslib.dll' is "700.08", patchlevel (0.18)
B New connection 0 created
M sysno 03
M sid EC6
M systemid 560 (PC with Windows NT)
M relno 7000
M patchlevel 0
M patchno 33
M intno 20050900
M make: multithreaded, Unicode
M pid 6020
M
M kernel runs with dp version 206000(ext=109000) (@(#) DPLIB-INT-VERSION-206000-UC)
M length of sys_adm_ext is 572 bytes
M ***LOG Q0Q=> tskh_init, WPStart (Workproc 0 6020) [dpxxdisp.c 1288]
I MtxInit: 30000 0 0
M DpSysAdmExtCreate: ABAP is active
M DpSysAdmExtCreate: VMC (JAVA VM in WP) is not active
M DpShMCreate: sizeof(wp_adm) 22528 (1408)
M DpShMCreate: sizeof(tm_adm) 3939600 (19600)
M DpShMCreate: sizeof(wp_ca_adm) 24000 (80)
M DpShMCreate: sizeof(appc_ca_adm) 8000 (80)
M DpCommTableSize: max/headSize/ftSize/tableSize=500/8/528056/528064
M DpShMCreate: sizeof(comm_adm) 528064 (1048)
M DpFileTableSize: max/headSize/ftSize/tableSize=0/0/0/0
M DpShMCreate: sizeof(file_adm) 0 (72)
M DpShMCreate: sizeof(vmc_adm) 0 (1268)
M DpShMCreate: sizeof(wall_adm) (38456/34360/64/184)
M DpShMCreate: sizeof(gw_adm) 48
M DpShMCreate: SHM_DP_ADM_KEY (addr: 05F80040, size: 4602896)
M DpShMCreate: allocated sys_adm at 05F80040
M DpShMCreate: allocated wp_adm at 05F81E28
M DpShMCreate: allocated tm_adm_list at 05F87628
M DpShMCreate: allocated tm_adm at 05F87658
M DpShMCreate: allocated wp_ca_adm at 06349368
M DpShMCreate: allocated appc_ca_adm at 0634F128
M DpShMCreate: allocated comm_adm at 06351068
M DpShMCreate: system runs without file table
M DpShMCreate: allocated vmc_adm_list at 063D1F28
M DpShMCreate: allocated gw_adm at 063D1F68
M DpShMCreate: system runs without vmc_adm
M DpShMCreate: allocated ca_info at 063D1F98
M DpShMCreate: allocated wall_adm at 063D1FA0
X EmInit: MmSetImplementation( 2 ).
X MM diagnostic options set: 0
X <ES> client 0 initializing ....
X Using implementation flat
M <EsNT> Memory Reset disabled as NT default
X ES initialized.
M
M Fri Aug 10 14:16:50 2007
M ThInit: running on host HSDNT24S12
M
M Fri Aug 10 14:16:51 2007
M calling db_connect ...
C Prepending D:\usr\sap\EC6\DVEBMGS03\exe to Path.
C Client NLS settings: AMERICAN_AMERICA.UTF8
C Logon as OPS$-user to get SAPSR4's password
C Connecting as /@CN6 on connection 0 (nls_hdl 0) ... (dbsl 700 310805)
C Nls CharacterSet NationalCharSet C EnvHp ErrHp ErrHpBatch
C 0 UTF8 1 05C7FBC8 05C85164 05C849EC
C Attaching to DB Server CN6 (con_hdl=0,svchp=05C84938,svrhp=05C96204)
C
C Fri Aug 10 14:16:52 2007
C Starting user session (con_hdl=0,svchp=05C84938,srvhp=05C96204,usrhp=05CAB0D8)
C Now '/@CN6' is connected (con_hdl 0, nls_hdl 0).
C *** ERROR => ORA-1403 when accessing table SAPUSER
[dbsloci.c 10379]
C Disconnecting from connection 0 ...
C Closing user session (con_hdl=0,svchp=05C84938,usrhp=05CAB0D8)
C Now I'm disconnected from ORACLE
C Try to connect with default password
C Connecting as SAPSR4/<pwd>@CN6 on connection 0 (nls_hdl 0) ... (dbsl 700 310805)
C Nls CharacterSet NationalCharSet C EnvHp ErrHp ErrHpBatch
C 0 UTF8 1 05C7FBC8 05C85164 05C849EC
C Starting user session (con_hdl=0,svchp=05C84938,srvhp=05C96204,usrhp=05CAB0D8)
C Now 'SAPSR4/<pwd>@CN6' is connected (con_hdl 0, nls_hdl 0).
C Database NLS settings: AMERICAN_AMERICA.UTF8
C Database instance CN6 is running on HSDNT24S12 with ORACLE version 10.1.0.4.0 since 20070810
B Connection 0 opened (DBSL handle 0)
B Wp Hdl ConName ConId ConState TX PRM RCT TIM MAX OPT Date Time DBHost
B 000 000 R/3 000000000 ACTIVE NO YES NO 000 255 255 20070810 141651 HSDNT24S12
M db_connect o.k.
I MtxInit: 0 0 0
M SHM_PRES_BUF (addr: 0A9E0040, size: 4400000)
M SHM_ROLL_AREA (addr: 788A0040, size: 61440000)
M SHM_PAGING_AREA (addr: 0AE20040, size: 32768000)
M SHM_ROLL_ADM (addr: 066B0040, size: 615040)
M SHM_PAGING_ADM (addr: 0CD70040, size: 525344)
M ThCreateNoBuffer allocated 544152 bytes for 1000 entries at 0CE00040
M ThCreateNoBuffer index size: 3000 elems
M ThCreateVBAdm allocated 12160 bytes (50 server) at 0CE90040
X EmInit: MmSetImplementation( 2 ).
X MM diagnostic options set: 0
X <ES> client 0 initializing ....
X Using implementation flat
X ES initialized.
C *** ERROR => ORA-376 occurred when executing SQL statement (parse error offset=0)
[dbsloci.c 11501]
C sc_p=05BD2F74,no=1,idc_p=05BE3998,con=0,act=1,slen=66,smax=256,#vars=0,stmt=05CAC8C8,table=DDNTT
C SELECT COUNT(*) FROM DDNTT WHERE TABFORM <> 'J' AND TABFORM <> 'V';
C sc_p=05BD2F74,no=1,idc_p=05BE3998,con=0,act=1,slen=66,smax=256,#vars=0,stmt=05CAC8C8,table=DDNTT
C prep=0,lit=0,nsql=0,lobret=0,#exec=1,dbcnt=0,upsh_p=00000000,ocistmth_p=05C9C038
C IN : cols=0,rmax=0,xcnt=0,rpc=0,rowi=0,rtot=0,upto=-1,rsize=0,vmax=0,bound=0,iobuf_p=00000000,vda_p=00000000
C lobs=0,lmax=0,lpcnt=0,larr=00000000,lcurr_p=00000000,rret=0
C OUT: cols=1,rmax=1,xcnt=1,rpc=0,rowi=0,rtot=0,upto=-1,rsize=4,vmax=32,bound=1,iobuf_p=05CB0AA8,vda_p=05CACB38
C lobs=0,lmax=0,lpcnt=0,larr=00000000,lcurr_p=00000000,rret=0
C SELECT COUNT(*) FROM DDNTT WHERE TABFORM <> 'J' AND TABFORM <> 'V';
B ***LOG BY4=> sql error 376 performing SEL on table DDNTT [dbstat#4 @ 693] [dbstat 0693 ]
B ***LOG BY0=> ORA-00376: file 62 cannot be read at this time
ORA-01110: data file 62: 'G:\ORACLE\CN6\SAPDATA4\SR4_11\SR4.DATA11' [dbstat#4 @ 693] [dbstat 0693 ]
B init: Got no entries from DDNTT !
B init failed
B db_stinit failed
M *** ERROR => ThCallHooks: event handler db_init for event CREATE_SHM failed [thxxtool3.c 260]
M *** ERROR => ThIPCInit: hook failed [thxxhead.c 2072]
M ***LOG R19=> ThInit, ThIPCInit ( TSKH-IPC-000001) [thxxhead.c 1519]
M in_ThErrHandle: 1
M *** ERROR => ThInit: ThIPCInit (step 1, th_errno 17, action 3, level 1) [thxxhead.c 10017]
M
M Info for wp 0
M
M stat = 4
M reqtype = 1
M act_reqtype = -1
M rq_info = 0
M tid = -1
M mode = 255
M len = -1
M rq_id = 65535
M rq_source = 255
M last_tid = 0
M last_mode = 0
M semaphore = 0
M act_cs_count = 0
M control_flag = 0
M int_checked_resource(RFC) = 0
M ext_checked_resource(RFC) = 0
M int_checked_resource(HTTP) = 0
M ext_checked_resource(HTTP) = 0
M report = > <
M action = 0
M tab_name = > <
M vm = V-1
M
M *****************************************************************************
M *
M * LOCATION SAP-Server HSDNT24S12_EC6_03 on host HSDNT24S12 (wp 0)
M * ERROR ThInit: ThIPCInit
M *
M * TIME Fri Aug 10 14:16:52 2007
M * RELEASE 700
M * COMPONENT Taskhandler
M * VERSION 1
M * RC 17
M * MODULE thxxhead.c
M * LINE 10202
M * COUNTER 1
M *
M *****************************************************************************
M
M PfStatDisconnect: disconnect statistics
M Entering TH_CALLHOOKS
M ThCallHooks: call hook >ThrSaveSPAFields< for event BEFORE_DUMP
M *** ERROR => ThrSaveSPAFields: no valid thr_wpadm [thxxrun1.c 720]
M *** ERROR => ThCallHooks: event handler ThrSaveSPAFields for event BEFORE_DUMP failed [thxxtool3.c 260]
M Entering ThSetStatError
M ThIErrHandle: do not call ThrCoreInfo (no_core_info=0, in_dynp_env=0)
M Entering ThReadDetachMode
M call ThrShutDown (1)...
M ***LOG Q02=> wp_halt, WPStop (Workproc 0 6020) [dpnttool.c 327]
Regards,
Abhishek -
Start up and waking from sleep problems. early 2011 macbook pro i-7 2.0
Been having problems with my computer starting up and waking from sleep. If i shut the lid it wont wake up upon reopening the lid unless i hit the power button. After hitting the power button it will restart automatically and you hear the chime and the cdrom ejecting , once the gray screen pops up it restarts again this time you hear the cd rom making the ejecting sound twice then it will start up as normal. Once it finally starts up my date and time has been reset to jan 2008. Other times when i open the lid hit the power button it does nothing at all. Even holding the power button for multiple seconds to force shut down it does nothing. Only way to get it to start up at that power is if i connect the charging cable. I have tried reseting the smc multiple times with no results and pram(even though it doesnt have anything to do with start up problems just did it anyways). It all started i last time i updated not completely sure what all updates i got but im still running 10.7. It seems like a battery issue which would make sense since its nearly 3 years old and i use it extensivly. Last thing that just started recently after i go threw the whole mess of getting it to start up if i pick it up or nudge it the thing will just shut off out of no where. Almost like there is a short somewhere, cant really be sure if its linked with the waking up from sleep/start up problems but seems right up the same ally. Any suggestions to what could be wrong would be greatly apreciated. Im assuming my battery may be on its last leg but the thing still holds a charge and my battery life hasnt dimished at all so cant really be totally sure. Thanks agian
Power or other problems related to unexpected system sleep, shutdown, lights or fans call for an SMC reset. It may not fix the problem but it would be the first thing an Apple Store would do if you were to bring it to them with this complaint.
If bumping the Mac causes problems it's an intermittent internal connection that the SMC reset is not likely to help.
Read all the steps.
Before Resetting the SMC
Try each of the following steps in this order before you reset the SMC. Test the issue after completing each troubleshooting step to determine if the issue still occurs.
Press Command + Option + Escape to force quit any application that is not responding.
Put your Mac to sleep by choosing the Apple () menu from the upper-left menu bar and then choosing Sleep. Wake the computer after it has gone to sleep.
Restart your Mac by choosing the Apple () menu from the upper-left menu bar and then choosing Restart.
Shut down your Mac by choosing the Apple () menu from the upper-left menu bar and then choosing Shut Down.
Resetting the SMC on portables with a battery you should not remove on your own
Shut down the computer.
Plug in the MagSafe power adapter to a power source, connecting it to the Mac if it's not already connected.
On the built-in keyboard, press the (left side) Shift-Control-Option keys and the power button at the same time. The power adapter indicator light will cycle off / on once.
Release all the keys and the power button at the same time.
Press the power button to turn on the computer. -
Synching iPhone after factory restore and restore from backup; synching appears stuck on Step 5 of 5, "waiting for items to copy." That message displays for hours with no apparent progress.
I never had this problem, but just noticed it happening.. Please note it's a BUG. I went out and bought a 128GB iPhone just to hold all my songs. It wouldn't work. This never happened with the iPhone 3/3s/4/5/5s but started happening with the iPhone 6. After 40 hours of working through all possible solutions on the web and with Apple cares support (supposedly senior level) They finally suggested what the problem was. I had "Convert higher bit songs to 128 aac" Checked. This does not work One more thing when I unchecked that, the sync took like 3.5 hours instead of the 9-12 hours is usually took even on the smaller iphones. I have 98.7GB of music. Before I was just syncing a list of specific songs.
The syncing seems to be random when it has the problem though. -
white screen appears instead of the wallpaper after starting up and all the funtions are working properly like the brightness and the vol
Hello again V.K,
I'm taking the computer to assistance as suggested. Even tho I'm almost 100% sure that this isn't a hardware issue.
Here is why I'm not wasting my time on my affirmative. I'm computer science bacharelor, I know about computer architeture and S.O architeture and also I'm computer developer for more than 10 years now. All behaviors presented have no connection with hardware problems. What I'm trying to say is that I'm not just saying things for saying, I have a logic behind what I say.
For a short example, whenever mouse right click stops working on a specific window/software, if I click on the window top border and drag it around and go back to the window content, the click works again.
Also, my keyboard and mouse work via usb. Usb is working normally. If I plug a usb memory stick it shows that usb is working as it should be.
On windows, right button click is also not working inside any software window, but if I click on start button, icons on desktop, anything on windows epxlorer, it works as it should be. Isnt't there bootcamp underneath windows ?
on top of it, it's a brand new mac, i have it for 5 months.
All these people that have the same problem, do u think all of them have hardware issues? Do you think Apple would keep releasing new computers with hardware problems and they wont have any information/recall for them? and worst, the problems start in a random date ?
This is my first mac and all these problems, being hardware or not, makes me lose all confidence on Apple products.
Davi. -
Mac osx freezes right after start up and all desktop files disappeared and the mouse can't click on anything..help?, Mac osx freezes right after start up and all desktop files disappeared and the mouse can't click on anything..help?
This is sometimes caused by Bad Blocks on the Hard Drive.
If 10.7, hold down Command-R at startup, and choose Disk Utility.
If 10.6 or earlier, boot to the Installer/Utilities DVD, answer only the "what language" question and wait for the MenuBar to be drawn. Choose Disk Utility from the Utilities Menu.
Select your Hard drive by Make & Model and check the SMART Status (lower right of the right window). Choose "Repair Disk" . This ONLY examines and repairs the Directory area of the drive, but may improve things a bit. If errors cannot be repaired, you may need a stronger tool, or a new drive. -
How To Start Forms and Reports From Start Command
Hi All,
How to start Oracle Forms and Reports in Oracle8i My OS is Windows 2000.Please tell the procedure to get into forms and reports.
Otherwise we have to install other software for Forms and Reports.
Thanks
SujanSujan,
what does the database have to do with starting Forms and Reports ? If you are on Wondows2000 then navigate to the \bin directory if the Oracle Home you installed Oracle9iDS to. Type ifbld90 for Forms and rwbuilder for Reports design environment.
If your ability to start Forms and Reports from the command line is your only exit criteria in evaluating software for a project , how far will you go with it?
Frank -
After updating Firefox and Thunderbird from 8.0.1 to 9.0.1 I am no longer able to pin either application to the Windows 7 Toolbar (running Home Premium 64-bit).
I RESOLVED THE ISSUE. I uninstalled the converter. Re installed after a cold boot.
The sites that would not load properly: I did a ixquick search of the titles that wouldn't download and found them at another location. They then downloaded perfectly. from the new location -
When i try to update cc downloadcenter it, stops after a while and shows an error
when i try to update cc downloadcenter it, stops after a while and shows an error ?
i tried every solution you suggested but nothing helped. And when i tried to download the cc desktop app.again it stopped downloading and gave an error code 207 and message that it could not
contact the server. ( i had internet open all the time and every other site wasconnected ) My premiere pro cc does also quit working when i try to do something ?
Maybe you are looking for
-
How to monitor if portal access through browser is down
I would like to catch the alert before users report Web site not accessible(HTTP 404). I'm thinking of an unix cron job. But what should I querry to check the status of Portal?
-
Footer not staying at bottom of page
http://www.mrjindustrial.com.au/index_newicons.html The footer is not sticking to the bottom of the page when viewed on a reasonable-sized monitor. There's a large space beneath it. I have not been able to work out exactly why this is happening, and
-
HI Can anybody plz send the T.code where we see the Reason wise & Department wise sales oders ( Target & Achieved)
-
Need help in solving conversion row to columns issue
Hi friends I came across a strange situation/ problem. The problem is in one table say source_metadata I have 4 attribute matching_Table matching_columns source_table source_col OTREDW.PARTY_ALT_ID Src_key rcw Source_key OTREDW.PARTY_ALT_ID party_id
-
Restore Domain Controller Server with Snapshot in HyperV
Dear Team, I have a Domain Controller (Windows Server 2008R2) hosted in my HyperV, and Accidentally its got corrupted and i have a snapshot backup which took 20 days back. when i restore that snapshot, i am unable to establish communication with al