Display a text conditionally in a form view

Hi Experts,
I have a BAPI being used as a data service in my model.
It returns a table.
If that table is empty, i need to diplay a plain text message "Success".
If the table has atleast one entry, I should display a text message "Not Success".
How can this be achieved in Visual Composer?
Regards,
Ravi Kanth Talagana

Drag a line from the output port of the bapi and select "Aggregate Data".
Select the new sigma operator that was added to the storyboard and in the configure element task panel select the field that you want to count and in the sigma field select 'count'.
Drag a line from the out port of the Sigma operator and select form view.
In the "Select Display Fields" box - select the field that the was counted by the sigma.
Add a plain text control to the form. Select the control properties and in the Label field at the Display tab write the formula - "IF((@ - select the field from the form>0),'Succeess','Not Success')"
Good-Luck,
Dafna

Similar Messages

Using a text field as well as a display as text field on a form

I have a text field that a user will enter in an employee id and from there it will populate a display as text field with their first and last name. I am trying to accomplish this using a javascript process but can not get the name to display. This does work if i change the display as text field to a select list. Can someone tell me what im doing wrong? Thanks
My code is below:
Application Process
DECLARE
v_desc VARCHAR2(255);
BEGIN
SELECT last_name||','||first_name
INTO v_desc
FROM org1
WHERE radionum = :P2_technician1_radio;
htp.prn(v_desc);
END;
HTML Form Attributes for p2technician1_radio_
onblur="set_Item();"
Javascript in HTML header
<script language="JavaScript" type="text/javascript">

</script>
Edited by: Dclipse03 on Dec 1, 2008 9:48 AM

Javascript:
<script language="JavaScript" type="text/javascript">

</script>
Setitem Process:_
DECLARE
v_technician1_name VARCHAR2 (200);
CURSOR cur_c
IS
SELECT last_name||','||first_name d,last_name||','||first_name r
FROM org1
WHERE radionum = v('p2_TEMP_APPLICATION_ITEM'));
BEGIN
FOR c IN cur_c
LOOP
v_technician1_name := c.technician1_name;
END LOOP;
OWA_UTIL.mime_header ('text/xml', FALSE);
HTP.p ('Cache-Control: no-cache');
HTP.p ('Pragma: no-cache');
OWA_UTIL.http_header_close;
HTP.prn ('<body>');
HTP.prn ('<desc>this xml genericly sets multiple items</desc>');
HTP.prn ('<item id="P2_technician1_name">' || v_technician1_name || '</item>');
HTP.prn ('</body>');
EXCEPTION
WHEN OTHERS
THEN
OWA_UTIL.mime_header ('text/xml', FALSE);
HTP.p ('Cache-Control: no-cache');
HTP.p ('Pragma: no-cache');
OWA_UTIL.http_header_close;
HTP.prn ('<body>');
HTP.prn ('<desc>this xml genericly sets multiple items</desc>');
HTP.prn ('<item id="P2_technician1_name">' || SQLERRM || '</item>');
HTP.prn ('</body>');
END;

I am not able to display the text conditionally

i am not able to display the text conditionally

Please check the below formula.
i am not able to print all the below text,the text is printing only one line and some is missing.
Please do the needful.
@(If(("@Endrdesc1."=="EWWC006"),"12 It is hereby understood and agreed that any work in connection with the delivery or cartage of goods other than by hand, handcart, cycle or bicycle is expressly excluded from the indemnity granted under this policy 97 It is hereby understood and agreed that any work away from shop or studio is expressly excluded from the indemnity granted under this policy.",""))

How to display long text of info in webdynpro view

Hi all
I want to retrive a text of 500 characters in TextEdit UI element from R3,but the attribute through which we have bind this UI element is mapped to model attribute which is coming in the form of table i.e. first row of that table contains first 132 characters and the second row contains next 132 characters. Now the problem is how to retrieve the whole text and display in that UI element.
Same is the problem for submitting this 500 text.

Hi,
You can use String concatenation for this:
String textToShow = <get first 132 characters from the model node>;
textToShow += <get next 132 characters from the model node>
//set textToShow to the context attribute bound to the TextEdit UI element.
Regards,
Satyajit.

Display null text field in tabular form

Seems too simple to ask in this forum but I know how to display null for a select list but how can I have a text field display blank instead of '(null)' in a tabular form?

Hi,
Go edit report attributes and check that attribute "Show Null Values as" do not have any value.
Regards,
Jari
My Blog: http://dbswh.webhop.net/dbswh/f?p=BLOG:HOME:0
Twitter: http://www.twitter.com/jariolai

Using xsl stylesheet with List View Web Part to display custom text

Hi
i have an xsl stylesheet with sharepoint listview webpart. The list view shows some items based on a filter. I want to display custom text such as "No Items" when there are zero items in the list view using the xsl stylesheet. How do i achieve
this. I have spent hours searching but couldnt find the exact answer. Please help me out. I am a light user not a hard core developer so I dont use Visual Studio. Thanks in advance

Hi
I have customised the list view webpart using a custom xsl file by including it in the xsl link of the list view webpart. So i think i need to include the condition in the xsl file itself else it wont work. Since the list view webpart isnt using the default
xsl. Please let me kknow if you have any idea about including a condition in xsl to check if there are not items in view.
The code of the xsl is included below.

<xsl:stylesheet
xmlns:x="http://www.w3.org/2001/XMLSchema"
xmlns:d="http://schemas.microsoft.com/sharepoint/dsp"
version="1.0"
exclude-result-prefixes="xsl msxsl ddwrt"
xmlns:ddwrt="http://schemas.microsoft.com/WebParts/v2/DataView/runtime"
xmlns:asp="http://schemas.microsoft.com/ASPNET/20"
xmlns:__designer="http://schemas.microsoft.com/WebParts/v2/DataView/designer"
xmlns:xsl="http://www.w3.org/1999/XSL/Transform"
xmlns:msxsl="urn:schemas-microsoft-com:xslt"
xmlns:SharePoint="Microsoft.SharePoint.WebControls"
xmlns:ddwrt2="urn:frontpage:internal">
<xsl:output method="html" indent="no"/>
<xsl:template match="/" xmlns:x="http://www.w3.org/2001/XMLSchema">
<xsl:variable name="Rows" select="/dsQueryResponse/Rows/Row" />
<table>
<xsl:for-each select="$Rows">
<xsl:call-template name="dvt_1.rowview"></xsl:call-template>
</xsl:for-each>
</table>
</xsl:template>
<xsl:template name="dvt_1.rowview">
<tr>
<td><img height="78" width="60"><xsl:attribute name="src"><xsl:value-of select="@Photo"/></xsl:attribute></img></td>
<td>
<table style="margin-left:10px;">
<tr><td><xsl:value-of select="@FullName"/></td></tr>
<tr><td><xsl:value-of select="@DOBinWords"/></td></tr>
</table>
</td>
</tr>
</xsl:template>
</xsl:stylesheet>

How to display Long text information in my view

Hi
I have a long text of static information , which i need to show in my view. its like agreement information. The user must be able to read it . It has some 20 lines of text. Which is the appropriate control to be used to show the information ?

Hi Naresh
I had some options of displaying the long text in the view.
option 1 - The long text in sap table was in multiple rows in terms of having each line as one record and when displayed looks like a paragraph statement. So I used a webdynpro table to populate the rows and made invisible the row/column lines. So When you run it on the browser it will display like a long text. By default, SAP table will have column some length of 72 characters, which I changed to 140 charcs, to get a long sentence formation.
option 2 - If the long text is not from SAP table and its kind of direct information, then just keep on pasting the text in the text view by providing spaces appropriately, so that the display will be a continous form of paragraph. This is a trial and error way and providing the spaces between the lines.
option 3 - Store the long text in a text file and call a import parameter, which will read the whole text and store it in string (node) and display it text view. ( alignment cannot be gauranteed)
option 4 - Last one, is to call a office (msword) or a pdf control , which will display the long text through the word editor or a pdf form.
If you have any specific issues do write back to the forum.
thanks
sathya

Conditional display of "Custom" Buttons in Portal Forms

Could someone tell me if the following is possible, and briefly explain the steps to a beginner in Portal (but reasonably familiar with PL/SQL):
Problem - How to display "Custom Buttons" conditionally
Example -
a) Assume you have a certain record ("patient_address"). The hospital requires that every patient address be authorized before submitting records to health insurance. However, authorized records should not be authorized again.
b) Also assume that the "patient_address" table has a column "authorized" (which can contain Y or N)
* The requirement is to show an "Authorize" button whenever the record being viewed has the "authorized" column as "N" only
* If possible, this can be further improved by obtaining whether the person viewing the information has permission to authorize, but this can be taken as a next step
Approaches -
1. If possible, achieve this in Portal Forms
2. (worst case) - show the button, but show a message if it is pressed and the action does not apply
Somehow, it seems as though Portal Forms is not suitable (or does not have the documentation readily accessible) of how to do specific, custom, real world forms design as in this example - could someone please elaborate
Also, would this be better done by using one of the following in combination with Portal:
- HTT (will this be supported, given that it is an Oracle internal technology)
- PHP (is this even compatible with Portal?)
null

Hi,
Conditional display/hide of custom buttons is not yet supported in Portal.
However, if you are willing to modify the generated form package this could be done.
Each form has a procedure called row_function which conditionally hides Insert/Update buttons depending on the mode. By default all elements of a form are visible, then row_function modifies the "visibility" property to hide that element.
for example, this is a fragment of row_function code which hides the Insert button in update mode:
"_form_state" := p_session.get_value_as_varchar2(
p_block_name => "_block",
p_attribute_name => '_FORM_STATE');
if "_form_state" = 'UPDATE_AND_DELETE' then
"_idx" := get_index('INSERT_TOP');
p_form.items("_idx").visible := 'N';
end if;
You can add any additional code to check form's session storage/custom package variable/function whatever is more suitable in your case.
Then you just set visible to 'N'.
"_idx" := get_index('MY_CUSTOM_BUTTON');
p_form.items("_idx").visible := 'N';
Of course the biggest drawback of this is every time you edit your form you will loose your change and must edit the package manually. To minimize the effect you can create a custom package/procedure with type signature matching that of row_function and place your code there, so you will need to add only one line of code to the row_function.
Hope this will help to resolve the problem, I don't know the status/plans for HTT/PHP support in Portal.
Thanks,
Dmitry

View Received HTML Emails - ONLY Displays Plain Text!

I've got Apple Mail set up running two IMAP Email accounts (including .Mac), and two POP3 accounts. For quite some time now, Mail refuses to display ANY email message (no matter what email address receives the message) that has HTML/images in it. For example:
The Apple newsletters for Apple Computer, and the iTunes store that come out periodically, they never display with the images- it's always a boat load of hyperlinks, random text here and there and HTML all over the place. I've purchased e-tickets from United Airlines online and have been unable to print out my confirmation because the email comes through with just the HTML, some text and everything all over the place.
I operate heavily with my email and this is an issue that may get me to ditch Mail permanently if I can't get it to work properly. I am diligent about doing Apple Software Updates, I've gone through the Preferences of Mail time and again, I even erased my harddrive and did a complete system-rebuild just to see if this would fix the problem, and alas no such luck.
I'm not even getting the drop down bar that asks "Do you want to view images associated with this email?" And when I do get an email that I know has images in it and is in the form of HTML, the images aren't even located in attachments.
Does anyone have ANY ideas? I've tried deleting the com.apple.mail.plist file several times to no avail. Is there anything that I could be overlooking? I'd really hate to ditch Mail for Thunderbird or worse, Entourage.
Thanks in advance.

Or you could try this:
To make Plain Text the preferred alternative for viewing messages (which may or may not accomplish what you want), quit Mail, open /Applications/Utilities/Terminal, type the following command (you can just copy it here and paste it in Terminal), and press <Return>:
defaults write com.apple.mail PreferPlainText -bool TRUE
You can revert to the default setting with the following command:
defaults delete com.apple.mail PreferPlainText
And you can reverse the setting regardless of what the default setting is with the following command:
defaults write com.apple.mail PreferPlainText -bool FALSE

How to display Formatted text in adobe form

In adobe form, I want to display the text which is inputed by formatted text edit in WD ABAP application.
It is always displayed as plain text like '<p>this is test text.</p>'. I have set the attribute Data Format to XHTML, Field Format to Rich Text for the Text Field in adobe form. But it doesn't work.
How to display these formatted text?
Thanks and Best Regards,
Jun

Hi Juergen,
I found Your blog and found it really interesting... though I was not able to use it: I (like Jun Li is asking, I guess) need to use a dynamic text, containing formatting informations (according the xhtml syntax).
I tried to pass it to the form by an ABAP-dictionary based interface and by means of the context (in a webdynpro page), but both tries failed.
Some suggestion will be greatly appreciated.
Thankyou
Simone

How to display TEXT vertically in SMART FORM

Hai,
I need to display the column name of a table vertically (readable from bottom to top) in smart form.
Could any one please tell me how to do this?
Thanks & Best Regards,
Maniyam Bhaskar.

Hi,
Go through these threads for the discussions happened on similar issue... hope it helps you..
how to print text vertically in smart forms
vertical and horizontal printing in same page with smartforms or sapscript
Good luck
Narin

Display Hint Text in Oracle Forms 6i at Text Item

Dear all seniors
I want to show Hint text at Text Item in Oracle Forms 6i.
when my cursor Focus goes at that item. I mean when I go with Tab key or Enter button then it show display text.
even though my mouse is not on that item.
please how it would be possible
thanks.
G.Y

Please create a display_item(for eg. Disp_Mess) just below the text field (For eg:-MyField) where you want to show hint. And then assighn Hint text to "DISP_MESS" in NEW-FORM-INSTANCE or at Initial value. Then create a PRE-TEXT-ITEM and POST-TEXT-ITEM trigger for MyField.
-- PRE-TEXT-ITEM trigger write following code.
SET_ITEM_PROPERTY('DISP_MESS',VISIBLE,PROPERTY_TRUE);
--POST-TEXT-ITEM write following code.
SET_ITEM_PROPERTY('DISP_MESS',VISIBLE,PROPERTY_FALSE);
It will work for you.
Regards
Ahamed Rafeeque Cherkala

Display form view title dynamically..

Hi Experts,
I have a requirement could u plz give me some inputs..
i am fetching account details based on account name. it is displaying both business partner and contact person details.
when i select CP on the result then CP details is displayed in the top of form view along with contact person number on the top of the title like Identify Account (ID: 20000907). i want to change that contact person no into there corresponding BP number dynamically..
plz refer the below image.
thanks & regards,
Srinivas

Hi Fabian Mayerhofer,
thanks a lot i full fill my requirement..
this is the code i wrote in IF_BSP_WD_HISTORY_STATE_DESCR~GET_STATE_DESCRIPTION of view BuPaMainVS
in component CRMCMP_BPIDENT.
CONSTANTS:lc_bp_role1 TYPE bu_partnerrole VALUE 'BUP001'.
   DATA lv_bp_number      TYPE bu_partner.
   DATA: lr_cucobupa    TYPE REF TO cl_crmcmp_b_cucobupa_impl.
   DATA: lv_bp_role       TYPE bu_partnerrole,
         lv_bp_number2        TYPE bu_partner,
        lv_customer       TYPE string,
        lv_bp_partner TYPE bu_partner.
   TYPES : BEGIN OF ty_but100,
            partner TYPE but100-partner,
            rltyp TYPE but100-rltyp,
          END OF ty_but100.
   TYPES : BEGIN OF ty_but050,
           partner1 TYPE but050-partner1,
           partner2 TYPE but050-partner2,
           END OF ty_but050.
   DATA : lt_but100 TYPE STANDARD TABLE OF ty_but100,
          lt_but050 TYPE STANDARD TABLE OF ty_but050,
          ls_but100 TYPE ty_but100,
          ls_but050 TYPE ty_but050.
   TRY .
       lr_cucobupa ?= get_custom_controller( if_iccmp_global_controller_con=>cucobp ).
     CATCH cx_sy_move_cast_error.
       RETURN.
   ENDTRY.
   description = cl_wd_utilities=>get_otr_text_by_alias( 'CRM_IC_APPL/IDENTIFY_CUSTOMER' ).
   IF lr_cucobupa->is_bp_search_done( ) EQ abap_true.
     lv_bp_number = lr_cucobupa->typed_context->customers->get_s_struct( attribute_path = 'STRUCT.BP_NUMBER' component = 'BP_NUMBER') .
ENDIF.
     CALL FUNCTION 'CONVERSION_EXIT_ALPHA_INPUT'
       EXPORTING
         input = lv_bp_number
       IMPORTING
         output = lv_bp_number.
     SELECT partner rltyp FROM but100 INTO TABLE lt_but100 WHERE partner = lv_bp_number and rltyp = lc_bp_role1.
*    READ TABLE lt_but100 INTO ls_but100 WITH KEY rltyp = lc_bp_role1 BINARY SEARCH.
     IF sy-subrc = 0.
       SELECT partner1 partner2 FROM but050 INTO TABLE lt_but050 WHERE partner2 = lv_bp_number.
       IF sy-subrc = 0.
         READ TABLE lt_but050 INTO ls_but050 INDEX 1.
         IF sy-subrc = 0.
           lv_bp_partner = ls_but050-partner1.
           IF lv_bp_partner IS NOT INITIAL.
             CONCATENATE lv_bp_partner ')' INTO lv_bp_partner.
             CONCATENATE description '(ID:' lv_bp_partner INTO description SEPARATED BY space.
           ENDIF.
         ENDIF.
       ENDIF.
ELSE.
       CONCATENATE lv_bp_number ')' INTO lv_bp_number.
       CONCATENATE description '(ID:' lv_bp_number INTO description SEPARATED BY space.
endif.
thanks & Regards,
Srinivas

How to display links in a text-field in Portal forms?

In a database the content in a varchar2 field could include a link:
'Shortname <a ref="#" title="Full or long item name">Long name</a>'
In a Portal report this field is displayed like:
Shortname {color:#0000ff}_Long name_
{color}
where the last part is a link. When pointing to this link with the mouse, the full item name is displayed. If this field is displayed in a Portal form, however, it is displayed exactly as written first:
Shortname <a ref="#" title="Full or long item name">Long name</a>
Could anybody tell how this field could be displayed as a link in Portal forms? The field itself does not need to be updated, it serves as an identifier for trailing fields in the details of a MD-form. If the long name should be displayed in the field, you would need to scroll horizontal to see the other details.

Yes your point is clearer now. You wish to see an abridged form of a field data with the facility to see the full data when you hover on that data. just like what we see sometimes in hyperlinks.
Both of the methods I told you work to display a modified data value* (without modifying them in the databse) and I floated them after testing. Have used slightly different functionalities in some applications a while back.
To get the 'mouse hover' display, you may want to use the java-script event-handlers of the form elements.
Both methods work with the premise that we do not want to change field data in DB; only displayed-data needs to be different.
1. The idea to edit info using sql-queries or functions from default value attribute work is the main thing. how and what should we edit the data to produce is a plsql-coding problem. So for instance, for a data example like yours, the following works!
assumption: the desired field is LINKS and is a column in PORTAL.TBL_TEST_FORMLINKS
SELECT DECODE(LINKS, NULL,NULL,SUBSTR(LINKS,INSTR(LINKS,'>','1')+1, LENGTH(LINKS)-INSTR(LINKS,'<','2'))) FROM PORTAL.TBL_TEST_FORMLINKS
If you need a different output or have a different requirement, then the example should be sufficient to guide you how to help yourself.
2. The other case of javascript embedded html in an additional plsql code also works. One such example is this:
<pre>
BEGIN
HTP.PRINT('<SCRIPT LANGUAGE="JavaScript1.1">
// find the element you want to edit first;
// hint: you may use this scheme and some basic jscript to extract the field LINKS : FORM_NAME.DEFAULT.LINKS.01
// now use javascript to get its value; treat it to fit your requirement; and equate it back to the LINKS element;
</SCRIPT>');
EXCEPTION
When Others THEN
null;
END;
</pre>
-- now follow my other instruction on FORM attributes in my second reply to see what you want to see.
these hints should be more than enough for anyone familiar with these technologies.
AMN

Viewing text in filled-in form on Acrobat 6.06?

h'lo all, first time here....
I'm using Mac Acrobat 6.06 on OS 10.6.3. I've downloaded a pdf tax form from Gov. and done a "save as"...
I can enter text in to any form field and it will print, but when I re-open the pdf, all of the fields *appear* to be blank.
But when I click on a field, it shows the text that I put in, but when I click on another field, the text from the first dissappears and the text from other is now visible!
bottom line, I'd like to see all of the text in all of the fields, but can't find the problem?
many thanks,
b myers

Larry G. Schneider wrote:
It sounds like you didn't use Acrobat/Reader to fill out the form but opened it in Preview instead.
That would be my first guess too but it also may be that the PDF isn't completely compatible with Acrobat 6.

Display a text conditionally in a form view

Similar Messages

Maybe you are looking for