Display and Printing Problems

I am using Photoshop CS5 extended on a minimac running 10.7.4. I have the lastest updates from Adobe installed for the Adobe Creative Design Premium Suite 5.5. I am having problems with photos not displaying correcting, but not all the time. This may sound strange. I am working on a project for a client with outside floor samples. The samples have smooth areas along with pitted or valleys patterns in it.  When the photo is displayed in photoshop it displays correctly for a time. I can leave the photo up or I can reopen the same file and the valleys and pits that are suppose to be displayed are now reversed and display as mountains or like a relief type of effect and prints that way too. Hopefully someone else has had a similar problem and can help.
This same problem occurs in Bridge CS5. The photos will display correctly for a short time but then the photos are reversed with the all the valleys pattern showing as mountains. I have deleted the cache, but to no avail. If I change to anothe folder go back to the original sometimes this clears the problem but not for long. So what gives?

Thanks Noel for the reply. Hopefully  this will help.
This is how the file should look like.
This is how the file usually displays.
Any help would be greatly appreciated.
Regards,
Ron Cecil

Similar Messages

  • Display and Print Problem with Reader 9.1.x

    hallo
    an external software produced pdf-documents. all of this pdf´s will work with all reader-versions 7 and 8. but with 9.x we have the problem, that the view is not korrekt. letters are not comlpete. this view will also be printed. this error is not on alle text-lines, but some lines show uncompleted letters. the manufacturer say, that is all standard and it is sure that the reader will have the problem :-)  yes surely.
    but maybe the reader is the problem. some ideas?
    the attch file shows the error. it is a label and in the middel of the label: Tamaris-TREND     or with reader 9.x T.......-TREND.
    thanks
    markus

    testing and testing and testing
    here the newest info
    it is not the letter size. small or caps letters.
    i added a new pdf. here under the bold number you must see "581*LAVENDER". but with reader 9.x it looks like the printer cardridge goes empty.
    i´ll go crazy with this sh... :-)
    thanks
    markus

  • Month view display and print format

    An earlier version of iCal would display (and print) the current month without showing the last few days of the previous month and the first few days of the next month to fill out a week. Is there any way in version 3.0.7 to display and print in this format again?

    testing and testing and testing
    here the newest info
    it is not the letter size. small or caps letters.
    i added a new pdf. here under the bold number you must see "581*LAVENDER". but with reader 9.x it looks like the printer cardridge goes empty.
    i´ll go crazy with this sh... :-)
    thanks
    markus

  • Display and camera problems... related?

    Dear Folks of Apple Support Communities.
    Recently i have started to experience a rather disturbing issues with my screen, and that made me remember of the problems with the camera.
    I have MBP retina early 2013 and. well, it is known fact that screens on this particular model are not exactly brilliant... The same could be said about the camera, which has simply tuns of blue noise! But the screen was acting pretty Ok for some time now, there always was a minor image retention, but as i had nowhere to fix this, i had to live with it. But recently the screen started to turn GREEN! Yes that emerald shade, almost like cartoon green!!! That happened to it once before, but was not so intense, well at least i was able to see something... But the other day i was completely blown away, when i turned on my mac and i sew bright-bright green screen with absolutely no picture... Why does this happen to a £2000 product i have no clue! Now it has an uneven colour (the bottom corners are blueish, and the sides are somewhat darker).
    Is there some way to resolve it? Or should i ask for the screen replacement (and the camera with it as well)?
    I will be in Glasgow starting from september, so i will have an Apple store near by... i just don't want this to happen anymore, it is really scary.
    Many thanks . Anna.

    Badlydrawnboy wrote:
    I have a new MBP that is less than 3 months old.  I've been having various display and power problems pretty much since I got it.
    You should not be having those type of problems on a brand new Mac.  Did you call AppleCare about this?  If not why not?  
    You have 90 days of free phone tech support from Apple on top of your one year warranty.  Strongly suggest that you use it before you lose it!  You already missed your 14 day from the date of purchase to return your MBP for a refund or an exchange.

  • Size & Quality - Exporting Pix from iPhoto for Display and Printing?

    I would like to export pictures from iPhoto for use in PowerPoint.
    If the pictures are in 4x3 format, exporting them using the "Custom" size option and specifying 1024 as the maximum pixels results in nice 1024 x 768 photos that fill the screen on most projectors. This is good.
    The exported photos are also at 72 pixels/inch. This is OK for onscreen display, but not so good for printing.
    Oddly, the results are the SAME (1024 x 768, 72 pixels/inch) whether one specifies Low, Med, High or Max quality in the iPhoto export panel -- though the file sizes ARE different (higher quality = larger sizes). (I used Photoshop Elements to identify the sizes of the exported photos).
    What gives? I would have thought higher quality files would have been associated with higher resolution (more pixels/inch) but this doesn't seem to be the case, and I don't understand why the file sizes are larger.
    Can someone recommend a way to export a batch of photos from iPhoto at a specific size (1024 x 768) and perhaps 300 pixels/inch) that I might use in PowerPoint for both display and printing? And perhaps explain the bloated file sizes with no apparent quality increase?
    Many thanks!

    Luxesto
    Welcome to the Apple user to user assistance forums
    If the pictures are in 4x3 format, exporting them using the "Custom" size option and specifying 1024 as the maximum pixels results in nice 1024 x 768 photos that fill the screen on most projectors. This is good.
    The exported photos are also at 72 pixels/inch. This is OK for onscreen display, but not so good for printing.
    DPI is meaningless for a digital photo until you display it - Dots Per Inch are just a meaningless number - the displayed DPI is the size of the photo in dots (pixels) divided by the inches of the display measures in inches - the DPI setting in the photo means nothing - see The Myth of DPI for a longer discussion on this.
    Oddly, the results are the SAME (1024 x 768, 72 pixels/inch) whether one specifies Low, Med, High or Max quality in the iPhoto export panel -- though the file sizes ARE different (higher quality = larger sizes). (I used Photoshop Elements to identify the sizes of the exported photos).
    What's odd? you said export with the largest dimension 1024 - that occurred just as you specified - what would be odd would be that the export were different form your specification
    What gives? I would have thought higher quality files would have been associated with higher resolution (more pixels/inch) but this doesn't seem to be the case, and I don't understand why the file sizes are larger.
    Higher quality means less compression (and therefore larger file size) - it does not mean a difference in compression - JPEGs have a compression from 1 to 12 available - iPhoto does 4 steps - small, medium, large and highest. I've not see the compression documented but I think of it as like 3, 6, 9 and 12
    Can someone recommend a way to export a batch of photos from iPhoto at a specific size (1024 x 768) and perhaps 300 pixels/inch) that I might use in PowerPoint for both display and printing? And perhaps explain the bloated file sizes with no apparent quality increase?
    Forget the DPI - just be sure the pixel sizes are correct - for printing you should have at least 150 dpi and 300 dpi is better - so at 150 DPI printing your 1024x768 photo can be printed at 6.8" x 5.12 " -- at 300 dpi it would only 3.4" x 2.55"
    LN

  • How to display and print CCR showing not only results, high, low or normal, but also normal ranges of tests.

    How do I display and print CCR showing not only my actual results, high, low or normal results, but also normal ranges of each test?  I can do this individually but not for the composite CCR.
    Thanks.

    Hi,
    I'm not exactly clear on what you are doing. I can tell you that the ranges and flags for high, low, and normal come from the lab results provider in the lab results they sent you, not from HealthVault. If you go back to the original document that came from
    the laboratory, you should be able to open it as a document and print it.
    I hope this helps. If not, please respond with more details, or if you'd prefer a private conversation, please contact HealthVault customer support by opening a support ticket with them.
    Thanks,
    Kathy

  • Display and print color matching

    Hi all. I need help because I'm coming crazy.
    I use Lightroom 5 to organize, edit, print and share my photos. I use an iMac 27" with Maverick installed, I calibrate the display using X-Rite color munki Display. I have a Canon 9500 Mark II printer and I like printing on Canon Fine Art Photo Premium Matte (FA-PM1), I also have a little Epson Stylus Photo P50.
    Here we are…I want Lightroom to manage the color when I print and I select the right Icc profile for the printer and the paper but when I print with the Canon printer the prints came out with incorrect colors; last attempt the print came out too magenta. How can I make sure the printer is not managing the color in the printer dialog box? There is nothing that say "none" or "no color management". I'm getting better results with the little Epson printer rather then the more expensive Canon printer.
    Anybody can help me?
    Thanks a lot.
    Mattia

    asdjkgh8 wrote:
    How can I display and print line numbers in FrameMaker doc? Thanks!
    Would you believe "not!" after all these years?
    Search Google for "framemaker line numbers" without quotes for a bunch of past postings and suggested workarounds.
    Add your request to the crowd at the official request location: wish
    HTH
    Regards,
    Peter
    Peter Gold
    KnowHow ProServices

  • W-2 and 1099R display and print in Portal

    Hi,
    I need to get the W-2 and 1099 forms available for an employee in the Portal, they should be able to display and print these forms. (For W2C's I will use the standard W2 reprint request).
    I have tried simulating PU19 but the parameters that needs to be passed is getting quite complex and I was wondering if someone has come across this very tricky development. I basically want the user to receive a screen with one dropdown, the year, the user can then choose a prior year and request the W2 or 1099 to be displayed and printable.
    The client is on Enterprise 4.7 Ext2.00 with EP6 SP2.
    Thank you very much and regards,
    Ronald G. Meyer
    Seems like I will be using a custom version of RPCTXSU0 for this. This doesn't seem to be something that is a requirement at clients as I had 0 responses ...
    Edited by: Ronald Meyer on Mar 21, 2008 7:33 PM

    I am reading the TemSe file which was sent to the Tax Authorities which I think is not an optimal solution as there is filename hardcoding involved but this seems to be the best option for now...

  • MBP 13'' Display and Screen Problems.

    HELP!
    I've posted about this problem before, and I've read all the threads, but my problem is not resolved despite sending my new MBP back to Apple to sort it out. They fitted a new logic board, but it has made no difference. My machine is still under warranty.
    The MBP continues to totally freeze when connected to an external projector via the mini port using VGA. The computer screen goes a funny blue-ish color with everything out of focus and the pointer freezes, too. It has also started to make a funny buzzing noise, too. I have to restart the entire machine, which is not very convenient right in the middle of using it. It is an intermittent problem. Sometimes, the machine is working OK for a few days, other days it crashes several times.
    I have read that this may be something to do with 32 bit versus 64 bit Kernel start up. Some suggest resetting the PRAM and system manager, but I'm still struggling. Does anyone know what the real issue is? A solution would be great.
    By the way, I am resorting to using my old MBP (Nov 2006 15" model) and it works perfectly still, no matter what projector it is connected to. It is frustrating the **** out of me as I bought the 13'' to have more power and RAM and it is easier to lug about the place, but I can't use it as I need to connect it up to various projectors at work.
    Any expert out there? I'd really appreciate a solution to this problem. Is it only confined to the MBP 13", or has the 15" got similar problems? From the threads, I can tell this has been a big issue for people using their computers in conjunction with a projector.

    Badlydrawnboy wrote:
    I have a new MBP that is less than 3 months old.  I've been having various display and power problems pretty much since I got it.
    You should not be having those type of problems on a brand new Mac.  Did you call AppleCare about this?  If not why not?  
    You have 90 days of free phone tech support from Apple on top of your one year warranty.  Strongly suggest that you use it before you lose it!  You already missed your 14 day from the date of purchase to return your MBP for a refund or an exchange.

  • HP Officejet 5510 all in one - stalling of printing carriage and printing problems

    I have had this All in One Printer since December 2004. It had been working fine until I replaced a cartridge at a refill store over a year ago. To deal with the problem with HP I felt would be time consuming so I  put up with the problem and if I needed good quality printing, I would take it to Kinkos.
     The print carriage is slow to respond and print from my computer and then in the middle of the task the carriage will stop and stall or bang like it wants to move, but is stuck and then, with all the lights flashing, I get a message in the copier window for me to clear the printing jam or carriage jam and then press OK.   I open the door to the carriage and then close it and press OK.  It does not always work the first time to make the carriage stop banging. Eventually it will stop and the paper will release  and then it will continue finishing the task, but a lot of the time what is printed has double printing with jagging to one side of the paper.
    This is also affecting receiving any faxes because it involves print carriage.
    I have done all the steps for clearing a paper/carriage jam. There is nothing visable to cause a jam.  I have managed to do  the self test after the printer goes through some banging and  then telling me to open the door to clear the jam.    I have done the steps to
    clean the cartridges and then again do a self test.   I downloaded the latest driver/updates for the printer, but the problem persists.
    The cartridge refill store , not seeing the problem first hand, keeps offering for me to bring back the cartridges if the problem persists and replace them. 
    Do you think it is the cartridges or the unit?   I just replaced the black cartridge in December 2009 and have not print much knowing
    the quality would be poor.  Yesterday I saw a message that I am low on black ink. That does not seem possible.
    When I do the self test it is showing white lines through the colored bars and I am missing the pink or red bar. So I know I have to replace the color cartridge.
    As far as alignment,  when I did the first of two self tests,                                                     Second Test After the Drive Download
                                                               the Vertical Cartridge to Cartridge read    -12                               -24
                                                            the Horizontal Cartridge to Cartridge read    -24                                99
                                                the Black Bidirectional Cartridge to Cartridge read    -54                                0
                                                 the Color Bidirectional Cartridge to Cartridge read      6                                 6
    After doing the steps to automatically clean the cartridges, it printed a report with symbols at the top. They look to be squeezed together and the top portions of the symbols are missing.  The black bar has some white indents along the edges and the blue and yellow bars are spread more apart with some lighter colored lines vertically.
    I have Windows XP and the HP Director was not working.  I downloaded the patch and it is working correctly telling me that both cartridges are low, the black more than the tri-color and now a message that the print carriage has stalled.  The help button tells me  to do everything I have already done.
    Do you have an answer that I  can manage by myself or would it be better to take it to a computer repair place?
    Thank You , 918nifferf

    I have a carriage jam on my HP Officejet 5510 which I cannot correct.. I have tried everything I know to do. There are two black pieces that will not spring down when the cartridges travel across. I th en get a carriage jam message.
    Do these pieces need lubricated?
    How can I get t hem to go down when the carriage goes across?
    Thanks for any information or help options
    Karol

  • PDFs display and print fine in Acrobat but not in Preview of PDFPenPro

    I have a curious problem in that check boxes in certain PDF files (insurance applications) appear as a "p" instead of a check box when I view the file in Preview or PDFPenPro. The check boxes appear and print properly when I open the PDF in Acrobat.
    I've checked the fonts with the Apple Font utility and there seems to be no issues with any of the fonts.
    Any suggestions?
    Thanks.
    Bud

    Hi,
    Strangely I'm now having exactly the same problem all of a sudden.  I've been building the book for about a month now (I've made about 6 before without any trouble) and along the way have been producing a pdf of the book to see how it will look.  Yesterday I noticed some of the images seemed to have lost colour when looking at the pdf version and then today, many pictures all of a sudden look exactly like the example you've supplied above. 
    I've tried shutting down my imac and restarting thinking it was a memory issue, have checked if I had any filters activated (which I don't and I haven't used filters in books before either), have tried repairing then rebuilding aperture, copying the book to a new library, new location, opening on a different mac and then printing again but none of this had any positive effect. 
    So from what I understand from your last post, the workaround you came up with was to revert to the original of each image that had the problem and then make the adjustments again? 

  • PDF Export And Printing Problem

    I am using VB 2005 and the Crystal Reports that is bundled with it. I have reports on my website in the Crystal Report Viewer. I have the tool bar showing the Export and Print buttons. When you try to print (or export to PDF) you get an error from Adobe Reader "Adobe Reader could not open 'AcrXXX.tmp' because it is either not a supported file type or because the file has been damaged (for example, it was sent as an email attachment and wasn't correctly decoded)."
    I can see the file in my temp folder on my c-drive and the file (AcrXXX.tmp) does not contain a pdf instead it contains html for the report (including the report viewer). I tried deleting everything in my temp folder and I still get the error. My desktop is Adobe Reader 8.0 and IE 6 and Windows XP.
    The same code will create the PDF on all development and test web servers just not on my production server.
    I have no problem exporting a report to Word.

    Hello Wendy,
    if you are not too sure whether this errro is CR or VS related pls simply try to use one of our samples and see if you can export from htere or if you get the same error:
    Sample site for NET:
    https://boc.sdn.sap.com/dotnet/samples
    general docu:
    https://smpdl.sap-ag.de/~sapidp/012002523100005853792008E/walkthrough_supportfiles.zip
    specific samples:
    https://smpdl.sap-ag.de/~sapidp/012002523100006252712008E/csharp_web_smpl.exe
    https://smpdl.sap-ag.de/~sapidp/012002523100006252812008E/net_web_smpl.exe

  • Aperture, Display and Printer Color Match/Profile Calibration ?

    I need to calibrate my HP Photosmart Plus B209a-m Printer to match what I see on my Acer X223w 22 inch display when using Aperture 3 and Photoshop CS5
    The colors are pretty close to matching but each photo I print comes out deeper in color ( shadows and highlights are off )
    I have the Acer display Color Profile set to Adobe RGB 1998, All photos shot with my Nikon D5000 in RAW format and Color Profile Adobe RGB 1998,
    Aperture 3.03 Proofing Profile Adobe RGB 1998 and when I print a photo I set HP Color Matching / ColorSync to Adobe RGB 1998
    I've been using Canon Photo Paper Plus Glossy II PP-201 for prints but can't find a profile for it to add to my HP Printer.
    If I did find a profile how would I install it so it would show up in the drop down list of paper types ?

    Well I'm pretty amazed that the prints are just slightly off, with all the things you're doing wrong in color management.
    First off, you don't seem to know the difference between a device profile and a working space (i.e. 'synthetic' profiles), since you assigned AdobeRGB to both your monitor and printer. You should profile your printer and display with special hardware, like the X-Rite Colormunki. This will generate a profile, that will translate how color should look theoretically (by the assigned working space e.g. AdobeRGB), to how they will look on the hardware.
    Secondly, RAW-images do not have a color profile! The setting in the camera only applies to in-camera JPEGs. RAW files only contain the voltages the CCD measured, this has to be translated into in image later.
    Thirdly, softproofing in AdobeRGB almost never makes any sense. It doesn't make any sense if your are softproofing in AdobeRGB if you want to match screen to print. Your softproofing profile should be the profile that is specific for your printer and paper combination. The only synthetic profile that makes sense to softproof to is sRGB, since that is the colorspace used on the web. And even that is disputable since 99.9% of web user do not have a calibrated/profiled monitor.
    Fourthly, Adding a color profile will not add a paper type to the drop down list in the printer driver. These are hard-coded in the printer driver and basically determine the amount of ink being placed on the paper.
    So I'd suggest at this point to fetch yourself a copy of 'Real World Color Management' by Bruce Fraser (ISBN 9780321267221) and read it from the front to the back before you again embark on the path of color management.

  • Adobe Professional 9.0 display and print quality.

    When I installed Adobe 9.0 it viewed and printed fine.  Now it's unreadable.  What settings do I need to change to get the viewing and printing back to where it's readable?

    This happened to me late last year and through this forum I was able to follow setting changes I believe in my Abode Preferences and it worked.  Then my computer crashed, but when I reinstalled Adobe Professional it was fine.
    Then, we hired a new assistant for me.  She installed Abode Professional 9.0 on a new computer (different version of course), and it was working fine in the beginning like mine did, and then one day she previewed a pdf and printed and the quality of the print became so low quality you couldn't read the text.  Pictures are fine.  I know it has to do something with the setting in preferences, but I cannot for the life of me remember what it was that I changed to fix this problem.  You help would be greatly appreciated.
    Thanks.
    Susan

  • Snow leopard and print problems

    I installed Snow Leopard in my MacBook and bought the new Imac desktop with Snow Leopard...now I cannot print wirelessly from either these or my old G4 (Leopard)....followed all directions and spent much time with apple support...downloaded Canon drivers and software again to be sure I had the latest and still no success. Canon then tells me the equipment does not work wirelessly even though it did on Leopard....(it is a Canon Pixma MX850)
    Any suggestions would be welcome

    I didn't see that 10.6.1 did anything for printing. BUT I did see new drivers from HP, Canon and Brother.
    In your case, I should point out that the MX850 does not use Bonjour. There is no way for the Mac to see this printer on the network without first installing Canon SW. Kind of a chicken and egg problem for the auto driver download. So you will need to manually download the latest Canon SW:
    http://support.apple.com/kb/DL899
    If you installed SW from Canon's web site / CDs, you first might want to trash /Library/Printers/Canon and reset the printing system (Hold Option and click the "-" in print and Fax Prefs).

Maybe you are looking for