Display driver doesn't work after Win 8.1 upgrade

I have just upgraded my laptop's operating system from Win 7 Premium to Win 8.1 Enterprise.
After the upgrade, my display driver Intel HD graphics 3000 seemed to have stopped working. PC had got stuck on 1024 x 768 resolution.
I tried downloading Intel HD graphics 3000 from HP support "hp.com/in", but it was only compatible for Win 7 x86 and x64. Then searched on Intel website "downloadcenter.intel.com", I could see Intel graphic driver only for 2nd generation cores(i3, i5, i7), unfortnately mine was a first gen core i5 (i5-2430M). I also downloaded Intel(R) driver update utility 2.0 which is a auto drivers detect tool from Intel. It searched for missing display drivers, downloaded and installed, but still it is not a perfect match for my system.
I have been missing my laptop's high resolution quality for the past few days and its like going through hell. Any help from you ladies and gentlemen of HP or any computer experts will be much appreciated. Thank You.
I will provide my laptop specs below:
Product name: HP Pavilion dv6-6154TX
Processor: Intel(R) Core(TM) i5-2430M CPU @2.40 GHz 2.40 GHz
Max screen resolution: 1366 x 768
Operating system: Windows 8.1 Enterprise 32 bit
System type: 32 bit operating system, x64 based processor
Display drivers: Intel(R) HD graphics 3000, AMD Radeon HD 7400M series.
Direct X version : DX 11
I am not sure whether, I have provided all the info necessary for you guys to assess. But i can put on any more info if you need.
Once again, I thank you very much for your time in reading and the help you would provide.
~Dinesh

Hi @dinesh_kumar ,
Thank you for visiting the HP Support Forums and Welcome. I have looked into your issue about your HP Pavilion dv6-6154tx Entertainment Notebook and downloading Windows 8.1 Enterprise. This is not compatible with Windows 7 Home Premium with 64 Bit. Here is a link to the Windows 8.1 upgrade assistant.
Here is a link to system requirements from Windows for Windows 8.1 Enterprise.
Hope this helps.
Thanks.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the bottom to say “Thanks” for helping!

Similar Messages

Portege Z930 - Display Driver doesn't work correctly

Hello,
we have a Portege Z930 with Windows 7 64 bit in use where the Intel Display Driver seem to work incorrectly.
First problem is the slow presentation on display - if we open a picture (simple JPG) and move the window, the window frame will break during the move and be shown very bizarre.
Next we installed a dynadock U3.0 docking station for using two external displays additionally. This works even worse. For the docking station we used the driver from the CD included on delivery, and we connect it over an USB 3.0 slot.
On booting switching onto the 2 displays instead of the internal notebook display doesn't work - so we use the workaround of using an extended desktop over all 3 displays (2 externals and the internal notebook display as third).
In Internet Explorer we had to switch off GPU Rendering and use Software Rendering instead because otherwise we observed critical misfunctions on the external displays (having 2 windows open the display froze or couldn't show moving windows). Nevertheless the display is not satisfactioning.
We already tried 3 different versions of the recommendet Intel Driver which is also offered by Toshiba for download; we loaded it there and also 2 more versions (one newer, one older) from Intel directly.
So how can we get that working correctly?
Thanks in advance and regards,
N. Cochems

Most importantly. make sure you have Win7 Service Pack 1 installed. New notebooks have problems running in win7 RTM (no service packs).
Sounds like Windows is using the standard VGA driver instead of the Intel driver. Uninstall all the display drivers from Control Panel->Programs and Features then go to the Toshiba website and install the Intel Chipset Utility then the Intel Display Driver, then go to DisplayLink.com and install the latest DisplayLink driver for the dynadock. The new DisplayLink v7.xx driver fixes many problems found in the v6.xx drivers.
Double check that the Intel drivers are installed correctly in Device Manager.

External Combo Drive doesn't work after installing Snow Leopard

This Mini was bought used with a defective combo drive. I purchased a "No-Brand" external Combo Drive (USB connected and powered) off eBay. Everything worked fine under Leopard. I used the external drive to install Snow leopard but could not eject the DVD at the completion of the installation process. I manually ejected the DVD and discovered the external drive now doesn't work with either DVD's or CD"s.
Any ideas what the problem is?
Ken

Mark this up to "cockpit' trouble on my part. The external combo drive now works.

Optical drive doesn't work after installing itunes 11.0.5.5

After updating to iTunes 11.0.5.5 my optical drive does not work. I have put the same CD in another PC and it works fine. When I right click on the optical disc drive in 'Computer' I get the error message "Windows cannot access the specified device, or file. You may not have the appropriate permission to access the item." If a CD is in the drive, the drive will either keep popping open or not open at all on its own. The CD will not open in any other player such as Windows Media Player either.

I read this article:
http://www.gearsoftware.com/wiki/index.php/CD/DVD_drives_disappear_after_install ing_iTunes
I did not have any AFS drivers.
This is what I did and my optical drive is now working:
1. Backed up iTunes
2. Unistalled iTunes
3. Tried to install iTunes 10.7 for Windows 64
http://support.apple.com/downloads/#itunes
4. When iTunes tried to launch I received the message "iTunes Library.itl cannot be read because it was created by a newer version of iTunes"
5. My computer would not recongize the optical drive at all now
6. I re-installed iTunes 11.0.5 for Windows 64
http://support.apple.com/downloads/#itunes
7. All my iTunes data is there and my optical drive works now
Note: I should clarify that before uninstalling iTunes 11.0.5 my optical drive worked sometimes. It would play maybe one song, both in iTunes and Windows Media Player and then stop working. The drive would also pop open on its own whether there was a disc in there or not. Also sometimes I had to manually open the drive with a paper clip.

Cd drive doesn't work after upgrade

why doesnt the cd drive work after upgrade to mountain lion 10.8.5

sometimes they stay in, but it doesnt sound normal, weird clicking noises, and sometimes it just spits the cd out.

CD/DVD drive does not work after Win 8 intsallation

from a month i've updated my windows into windows 8, everything is working great but the DVD-RW .
When i put empty cd and try to open it, it gives me error while opening saying:
"windows was unable to complete the format"
So is that a software or a hardware problem?!
waiting for the help !

Does this mean that your CD/DVD drive does not work anymore and is not recognized by system?
If yes, then I would recommend checking this Toshiba document which I found on the knowledge base portal webpage:
+Why does my CD/DVD Drive not work after upgrading to Windows 8?+
http://aps2.toshiba-tro.de/kb0/FAQ2B03F10002R01.htm
You will need to uninstall the Toshiba programs:
TOSHIBA Recovery Media Creator
TOSHIBA Disc Creator

Cd drive doesn't work after installing iTunes

I installed iTunes and started to try and rip cd's into the library but the cd drive isn't working any more.. Something about the driver, which I updated, or it also says the registry is incomplete for the cd drive. I ran into this once before on another computer, but I forget how to fix this. I tried to do a system restore to before I installed iTunes, but my computer wouldn't let me restore. Any suggestions?

Hello banjo1971,
The following article provides steps which can help correct this issue and get your disc drive working with iTunes again.
iTunes for Windows: "Registry settings" warning when opening iTunes
http://support.apple.com/kb/TS3299
Cheers,
Allen

RE: Drive doesn't boot after 10.5.8 upgrade

After upgrading to 10.5.8, it was a struggle to shut down my machine, especially after typing in Firefox caused it to lock up. When I decided it would be best to restart the machine and start fresh, the screen stayed gray, without the apple on bootup. After a few reboots, I had the computer boot to one of my FireWire drives. Initially, the internal ATA drive didn't show up at all in either DiskUtility or DiskWarrior. After a few hours, the drive began to show up in DiskUtility, with the brand name of the drive listed, but no down arrow with the name I gave the drive. It also doesn't allow me to select any of the buttons for verify/repair disk permissions or verify/repair disk, as they are greyed out. There is no change with DiskWarrior, as it doesn't show me the drive in the pull down menu. And in TechTool Pro, it shows the drive off to the side as disk4s, but doesn't allow me to mount the drive.
Any solutions to get my drive back up and running, and to archive files/programs onto a backup drive?

Update:
After coming to the realization that no software was going to get me up and running with the drive, after testing the Seagate I drive on another G4, and getting similar, if not worse results on that one (as I couldn't even get it to be listed in the DiskUtility window that I had previously, even though I couldn't verify/repair disk on my computer either) — I took the mindset that by partitioning the drive — if it still was a kosher drive — that I could then take it to a data recovery place as a last resort.
I had planned on taking the drive for data recovery to a place near my home, but of course they closed up shop after more than a decade in the community just last month. Being antsy and wanting some resolution, upon reading that by partitioning a drive, it would not zero out my data, made it sound that it should be an easy recovery, and at least start the process.
Then again, I was wondering if there was some software that I could get to be able to do that myself, or some method so I don't have to fork over $$$$ if it's an easy thing to do myself? After reading up on partitioning, it indicated that I wasn't deleting anything, and that it was in essence re-jigging my drive. So I took my 75GB drive, and split it 15GB/60GB. In an blink I had two drives that I could access once again. I ran the verify/repair options, with no errors coming up. From there, I then began to reinstall OSX 10.5 on one partition, but stopped immediately, knowing that having the OS wasn't necessary at this point, as I still have an outboard FireWire drive to boot to.
I then rebooted the machine to that FireWire drive, and to my sadness, while the two partitions appeared on the desktop, one was a completely empty partition (60GB) and one with just 64K (15GB).
I knew it wouldn't be that easy.
Having already scoured Disk Utility, DiskWarrior and found nothing to recover the data, and used the Data Recovery "tool" in TechTool Pro 5, with it only bringing up about 30 System files at the most based on a single search for one letter in the alphabet, I'm all ears at this point at what I can do possibly on my end.
At least I know that the drive is in working order, despite the few people I talked to who tried to tell me that the drive just suddenly breathed it's last breath, and would never work again. The 10.5.8 update has something to do with why the drive fried, and there doesn't seem to be anything physically wrong with the drive.
Thanks in advance.

Touch screen doesn't work after Vista Home64-bit upgrade to Windows 7 64-bit Home Premium on IQ506

Hello, right before I upgraded to Win7, I made sure that the Touchsmart software worked and that the touch screen itself worked. As soon as I performed the upgrade (not the clean upgrade that wipes all your existing data, but rather the upgrade that carries over your applications and files), the touch screen ceased to work.
I didn't panic, thinking that I probably had to run some windows/hp updates, which I did to no avail. I also manually updated ALL the driver/software files found at this link http://h10025.www1.hp.com/ewfrf/wc/softwareList?os=4063&lc=en&dlc=en&cc=us〈=en&product=3752245
Yup, every single one. As a last resort, I tried some of the HP troubleshooting for touch screens not working. It said to shut down the computer, pull the plug on the computer, hold the power button for 5 seconds, plug the computer back in, and boot it up again. Didn't help at all.
I'm at the end of my rope and there is no additional HP support on this. I'm waiting for a reliable driver update for win7 for this **bleep** touch screen. I'm dead in the water -- I've got a touchscreen computer whose touchscreen doesn't work! Someone else out there must be having this problem! Any leads?

Did you try installing the Touch Driver?
http://h10025.www1.hp.com/ewfrf/wc/softwareList?os=4063&lc=en&dlc=en&cc=us&product=3752245&lang=en
Driver
Date
Version
Previous
Size
» NextWindow Multi-Touch Device Driver Update
11-2009
1.3.0.2
2.83M

External Hard Drive doesn't work after Time Machine cancelation

First post on the forum.
So far i've had 2 hard drives broken because of a simple Time Machine.
I own a MBP and an HP so my hard drives usually have 2 partitions, one for mac, the other for pc. About a month or so i was doing a Time Machine on my Iomega 1TB (the partition used for the time machine is formatted in Mac Os Expanded (with journaling)), and, because the time machine was extremely slow i stopped it. Then came the problems. I tried to connect the Iomega to the mac, but the partition in which i had the time machine doesn't mount. the other partition is mountable and i even managed to delete some files in it, so it worked. But now the partitions don't mount. I can still see the two partitions in Disk Utility, with the correct names i gave them, but cannot mount.
Right now i don't have the disk with me because i went to a "professional" to try and at least recover my files. What a joke that was. First they told me they had my recovered files and them the files were not mine. The switched the disks and gave me someone elses files. And now they ask me for 1100$ to recover my files because it is a hardware malfunction. Obviously i dont have that amount of money available and i cannot afford the recovery atm, and i do not believe that a software can cause hardware to fail. (just guessing)
Resume: 1 external hard drive, with 2 partitions, one mac os expanded and the other is a Windows NT Filesystem. None of the partitions are corrently mounting on mac but the disk utility recognizes the partitions and the names i gave them.
So guys can u help a poor little girl that needs her photographies so that she can go and show her portfolio to get a job. :/
Kinda desperate at this point.
ps: sorry for bad english, second language

One can't read the other.
Just to be clear Mac's can read/write FAT32 but windows cannot use OS X Extended. So to use a drive on both systems it needs to be formatted FAT32
FAT32 does have limitations and possibly the best solution is to use NTFS, a more modern, robust filesystem. The drawback here is that OS X does not natively read NTFS so a third party kernel extension is needed.

CD/DVD doesn't work after Win 8 upgrade on Satellite L750

Hello,
after upgrading my Satellite L750 to Windows 8 I can't access my CD/DVD-unit anymore (error-code 19 invalid invalid or not complete registry entry). Same error occurs when I connect my USB BD-writer.
Who can help?
Frank

Hi guys
Found a solution here:
http://www.csd.toshiba.com/cgi-bin/tais/support/jsp/bulletinDetail.jsp?pf=true&soid=3516888
*Uninstall the Toshiba programs:*
TOSHIBA Recovery Media Creator
TOSHIBA Disc Creator
Then restart your PC using the Power-->Restart option in Windows 8.
Your CD/DVD should be accessible now.
For help with uninstalling these programs follow the instructions below
*To Uninstall a program or application:*
1. At the START screen type Control Panel
2. Select Programs --> Uninstall a program
3. Find the two programs listed above and uninstall these applications
4. After the application programs are uninstalled restart your computer using the Power-->Restart option in Windows 8
5. When the computer power back on the CD/DVD drive should be available
If the CD/DVD drive still does not appear follow the instructions below to uninstall a device driver
*To uninstall a device driver:*
1. At the START screen type Device Manager
2. Select Device Manager > DVD/CD-ROM drives > right click on the device displayed > select Uninstall.
3. After the driver uninstalls, power down you computer using the restart method. The driver will install automatically when the computer restarts.
4. The CD/DVD drive should now be shown.

X60 display driver doesn't work!

Info: I reformatted my hard drive, and I'm trying to install all the drivers I need. I'm using Windows XP Pro.
Problem: The video driver on the drivers website for X60 does not work
Error Message: When I click on setup.exe, I receive the following error message: "This computer does not meet the minimum requirements for installing this software. Setup will exit."
Questions:
1. What video driver do I have anyway? How do I check?
2. Where can I download the driver for my video driver?
(3. Why doesn't the video driver on the website work?)
Thanks in advance for any help.

Please do the following...
Start > Control Panel > System
Go to the "Hardware" tab
Click on "Device Manager"
Double-click on the graphics device
Go to the "Details" tab
From the drop-down box select "Hardware Ids"
Post the Hardware ID as shown there
For example, on my T61 with Intel x3100 graphics, the device is shown as follows...
PCI\VEN_8086&DEV_2A02&SUBSYS_20B517AA&REV_0C
\\ I do not respond to PM regarding individual tech support. Keep discussions in the forum for the benefit of others //

Printer doesn't work after Panther to Tiger upgrade

After upgrading from Panther to Tiger my usb connected Canon PIXMA iP5000 printer no longer works. In printer setup utility when I click "add" I see the ip5000 but the "Print Using" dialog box says "please select a driver or printer model". In the drop down list under Canon there is no driver listed that corresponds to my iP5000 (also, only gimp-print drivers are listed for some reason).
I reinstalled the printer software from the disk that came with the printer but still nothing relevant appears in the list under Canon. I installed a newer OSX driver from the Canon website but still nothing relevant (and still only the gimp-print drivers in the list under Canon).
Using the finder search function I located a file called ip5000.ppd on the hard drive. I selected this file in the "Print Using" dialog box and was then able to add the printer. When I try to print though nothing comes out of the printer.
I installed a driver from www.printfab.com for the iP5000. This works fine but apparently I have to buy a license for $61 to use the software?
Can anyone out there tell me what's going on? Why is the driver from the Canon web site not showing up under the Canon tab in the printer setup utility? Any idea where it is or what file extension it should have so I can search for it?
Thanks,
Stickman007
imac G5 PowerPC Mac OS X (10.4.8)

In step 3, I moved the contents of the BJPrinters
folder to the desktop instead of deleting them
(deleting is so final).
We need to delete and empty the trash. It seems that for some setups, leaving the files on the system (including the trash) interferes with the new driver installation/operation.
In step 4, the only file that seemed close to what
you mentioned was CanonPrinterDrivers.pkg. I moved
it to the desktop also.
This is the original package included with the OS for the Canon BJ drivers we are deleting. In case you ever need to add an old Canon driver then it would be best to put this file back. But it is odd that there is no other Canon package. I expected there to be one for the iP5000 that you installed.
The result was the same as before - when I try to add
the printer the "Print Using" menu still shows a
greyed out "please select a driver of printer model".
The Canon folder still shows the same gimp-print
options, none of which are related to the iP5000.
Yes. The iP5000 won't appear in the list as it hasn't been written to do so. As I said before, the driver, upon detection of the printer, adds the printer to the list. You cannot browse to it.
Let me know if you have any other ideas (or if I need
to delete the files rather than just move them to the
desktop).
So, I think you need to do the steps again, this time delete the contents of the CanonBJ folder and empty it from the trash. The thing I would add this time is turn off the iP5000 (unplug the power cord but leave the USB connected) at Step 6 (you may need to shutdown rather than restart the Mac). Then start the Mac, install the latest driver (which is v4.1.9) do the disk permissions and then, before you open the Printer Setup Utility, reconnect the power cord to the printer. Hopefully now the driver will detect the printer and add it to the list.
Paul

HP wireless TV connect no longer working after Win 8.1 "upgrade"

Help, my transmitter will not link to the box now that I have upgraded from Windows 8 to Windows8.1.
When first plugged in, the Trans light blinks 5 times fast, then no lights. The receiver continually blinks slower and when the trans button is held, the lights both blink at the same speed, but will not link.
I removed and tried to "add new video source" but the "Please activate registration on transmitter unit" pops up and when attempting to push button, the two won't sync...
I looked for the HP trans in the devices but could not find it. I check the HDMI card (disabled and enabled) to no avail...
Are there firmware patches for this device. I need help ASAP as I need this functionality for work, but I had to have the upgrade for work as well...
I am getting a "tone" when the receiver fails from the laptop speakers

PROBLEM SOLVED ON ENVY 17 INTEL QUAD: Using Windows 8.1 with HP Wireless TV connect NOT linking issues. I had the total 8.1 installed 4/12/2014 and even at this late a date, not all the wireless drivers were updated to their latest rev. HP Support has a set of Intel driver updates and downloades; just select the ones you need, save and update. With the update to all the associated applications, I believe there were 3 of them for my computer, I am now working well. I am under warranty with my unit so I was fortunate to have, Likshima, a second level supervisor at HP who took the time to research this problem and find the solution, personally correct my issues! Hope this helps because to my comprehension, an update is by far the safest solution!!!

Http web proxy doesn't work after iOS 8.0 upgrade

Hi ,
I upgraded my ipad air to ios 8. But after this change I am not able to connect to any web site through http web proxy. I think this has to be related io8 specifaciton.
Please let me know any solution for this.
Regards ,
Gokhan

Ever since the iOS 8.0.2 update my iphone 4 will not update any of my apps. I have 12 apps stuck on updates. Is anyone listening at Apple?

Display driver doesn't work after Win 8.1 upgrade

Similar Messages

Maybe you are looking for