Display format for Chapter numbers

I would like to be able to use automated chapter numbers however I am required to have a RH header which displays the chapter number in the header as a Two rather than 2. Is it possible to create some alternate display for the numeric chapter number.

In your book file, right click on the chapter, select Numbering, and on the Chapter tab specify "text" and then type "Two" as the field entry.
Repeat for each chapter -- you can't automatically increment a text entry.
Save and update.

Similar Messages

  • Multiple display formats for several records coming from the same table

    Hello all,
    I want to create one Crystal Reports XI report to display several records coming from one table, but I need different display format for different records from that one table.
    There is a field RecordType and based on that value, the record will be displayed differently on the report page.
    Can I have several sections in the report and to define different SQL query in each of them?
    Example of the report I need to see on paper:
    ================================================
    Summary of 216 vehicles:  (the value 216 comes from record with RecordType=1)
    Vehicle Category    Number of Vehicles
              A                   5          (this value 5 comes from record with RecordType=2)
              B                   7          (this value 7 comes from record with RecordType=3)
              D                   4          (this value 4 comes from record with RecordType=4)
    Category A vehicle numbers:
    2345   6789   8765   5543   3452    (these five values come from records with RecordType=5)
    Category B vehicle numbers:
    9876   8876   9987   4321   6754   5215   4543    (these values come from records with RecordType=6)
    Category D vehicle numbers:
    2343   2344    2348   2377    (these values come from records with RecordType=8)
    ==============================================================
    Text is fixed (labels), number values are coming from table records.
    What would be a good way to do this in Crystal Reports XI ? In Cognos ReportNet, I would just create several Queries (SQL sentences) and place their outputs on a page, one after the other.
    I use Crystal Reports XI R2 and Oracle 10g database through and ODBC connection.
    Thank you,
    Milan

    Obaid and Debi,
    Thank you for your replies.
    I can create multiple sections in the report, but I don't know how to split the 20 records that I get back from the database to be displayed in 5 different report sections.
    How can I define different SQL statement for each of 5 report sections?
    How can I use cross-tabs to display what I need? Can I define SQL statement for each cross-tab and then I could place only RecordType=1 records into cross-tab-1 and all RecordType=2 records into cross-tab-2 ?
    In Cognos ReportNet, I defined 2 Queries (SQL statements) and I just placed them in the report one below the other. Query_1 returns 1 record where RecordType value =1. Query_2 returns 5 records where RecordType value =2 and etc. So each record "section" displays record in the way I want it.
    ================================
    Summary of 216 vehicles:  (the value 216 comes from record where RecordType=1)
    Category A vehicle numbers:
    2345   6789   8765   5543   3452    (these values come from records where RecordType=2)
    ================================
    How can I do that in Crystal Reports XI ?
    How can I run several SQL statements from one report?
    Thank you,
    Milan

  • Display format for Exif Tag: ExposureTime

    Hello,
    I'm a user of Adobe Photoshop Elements 3.0, in which the image editor component displays "File Info" (Exif and XMP information) embedded in the image file using the Adobe Photoshop Information Panels, which are XMP files (
    DOCTYPE panel SYSTEM "http://ns.adobe.com/custompanels/1.0").
    Unfortunately, my camera embeds the Exif tag
    ExposureTime instead of the Exif tag
    ShutterSpeedValue.
    In the camera1.txt XMP panel file, the ShutterSpeedValue field is defined as (the Adobe Forum Web UI will break the formatting)
    static_text(name: '$$$/AWS/FileInfoLib/Panels/Camera1/ShutterSpeed=Shutter Speed:', font: font_big_right, vertical: align_center);
    edit_number(format: apex_shutterspeed,  precision: 2, format_addin: '$$$/AWS/FileInfoLib/Panels/Camera1/ShutterSpeedFormat=^0 sec',locked: true, horizontal: align_fill, xmp_ns_prefix: 'exif', xmp_namespace: 'http://ns.adobe.com/exif/1.0/', xmp_path: 'ShutterSpeedValue');
    I changed this to:
    static_text(name: '$$$/AWS/FileInfoLib/Panels/Camera1/ShutterSpeed=Shutter Speed:', font: font_big_right, vertical: align_center);
    edit_number(format: decimal,  precision: 4, format_addin: '$$$/AWS/FileInfoLib/Panels/Camera1/ShutterSpeedFormat=^0 sec',locked: true, horizontal: align_fill, xmp_ns_prefix: 'exif', xmp_namespace: 'http://ns.adobe.com/exif/1.0/', xmp_path: 'ExposureTime');
    in order to display the correct Exif tag.
    But how can I display the usual reciprocal shutter speed format ("1/160th sec") instead of the decimal format ("0.0063 sec")?
    Any help much appreciated!

    Don't know about the display format problem ... but there seems to be another quirk. Obviously you are confusing shutter speed with shutter speed value. These are two different things. The shutter speed value is the inverted base-two logarithm of the shutter speed in seconds. Example: shutter speed = 1/128 s --> shutter speed value = 7.
    By the way, there's a similar difference between aperture and aperture value; the latter is twice the base-two logarithm of the f-stop number. Example: aperture = f/8 --> aperture value = 6.
    -- Olaf

  • Different format for page numbers on different pages

    Hi guys,
    Currently I'm about to finish my thesis. Pages has been a great help with everything, until now. The problem is that I want to add page numbers, but some pages should have a different numbering then others. To clarify here is my table of contents with the desired page numbers:
    -Figures          i
    -Tables          ii
    -Acronyms     iii    
    -Chapter 1     1
    -Chapter 2     15    
    -Chapter 3     27
    -Appendix     iv
    -Summary     v
    So the stuff that is not directly main content should be numbered in roman numbers. The chapters then can have normal numbers.
    I've been trying for a while to make this happen now, but without luck. Anyone know how to accomplish this? I would be very thankful.

    Divide into Sections by inserting section breaks between and make the Roman numerals the first part and restart the numbering at Chapter 1:
    Inspector > Layout > Section > Start at: 1 / uncheck Use previous headers and footers
    To change the numbering format in the header or footer, right click on the page number and choose what you want.
    Peter

  • Generated RTF TOC displaying 0 for page numbers

    Hi,
    I have an issue where I created a table of contents using Styles in Microsoft Word in my .rtf template. This is how it is displayed in the template and how I wish to display it in the generated .rtf:
    Section 2.3 : Section 2.3 Test...................48
    Section 2.3.1: Section 2.3.1 Test.............48
    Section 2.3.2: Section 2.3.2 Test.............48
    Section 2.3.3: Section 2.3.3 Test.............49
    Section 2.3.4: Section 2.3.4 Test.............50
    Section 2.3.5: Section 2.3.5 Test.............50
    When I go to generate the .rtf, the page numbers all turn to '0'. The hyperlink works correctly but the page numbers are not displaying the correct numbers. If I generate in a .pdf format, the numbers appear correctly. Unfortunately I need this to be in .rtf format. Anyone have any ideas? I cannot find anything on this issue.
    Generated in .rtf:
    Section 2.3 : Section 2.3 Test...................0
    Section 2.3.1: Section 2.3.1 Test.............0
    Section 2.3.2: Section 2.3.2 Test.............0
    Section 2.3.3: Section 2.3.3 Test.............0
    Section 2.3.4: Section 2.3.4 Test.............0
    Section 2.3.5: Section 2.3.5 Test.............0
    Thanks.

    Its identified as a word issue.
    You need to manually update the TOC in generated RTF to refresh page numbers.
    Check the note 'Table Of Contents Page Numbering In RTF Output Is Incorrect (Doc ID 473505.1)'

  • Fix for chapter numbering?

    I use Frame 8.  I have a book with four chapters, and I added one between 1 and 3.  The autonumbering changed the order to Chapter 1, Chapter 3, Chapter 1, Chapter 3.
    I have tried to use the Document -> Pagination window to tell it to "continue from previous" or put in the number I specify. I've also tried the same thing with the whole book.  Strangely but happily, the TOC does the numbering perfect when I update the book.  I have also tried importing formats from another document with correct numbering.
    Any ideas?
    Thanks!

    You have to set the numbering at the Book level. Book settings always trump Document settings. Select all files in the Book, right-click and select Numbering. Set the Chapter tab to Continue from previous, provided you're using the <$chapnum> variable.

  • What is the format for contact numbers

    Is it important to have parenthesis around area code when typing contacts and does that effect the notification screen when contact calls?

    Doubt you're still looking, but I just put up a blog post on the format:
    http://blog.lib.umn.edu/mcfa0086/discretecosine/160784.html

  • Matching Chapter Numbering in Table of Contents (TOC)

    I have applied the <$chapnum> and <n+> building blocks to the paragraph styles used in my TOC, but instead of displaying the correct chapter numbers, every chapter section starts with "1".
    Could someone please tell me what I need to do in order to match the TOC numbering with the book numbering?
    Thanks in advance,
    Douglas

    douglas131313 wrote:
    I have applied the <$chapnum> and <n+> building blocks to the paragraph styles used in my TOC, but instead of displaying the correct chapter numbers, every chapter section starts with "1".
    Could someone please tell me what I need to do in order to match the TOC numbering with the book numbering?
    Douglas,
    I assume that the chapter numbering works correct through all the chapters, and only the TOC numbering is wrong. Correct?
    In this case you shouldn't have an own (independent) numbering definition in your TOC paragraph styles, but READ the original numbering from the respective paragraphs/chapters. You do this by adding the <$paranum> variable to the TOC reference page, so the entry/entries there should read equal or similar to:
    <$paranum> (Tab) <$paratext> (Tab) <$pagenum>
    Define the tabulators for the TOC paragraph styles as if there was a numbering definition, and the number read from the chapters will appear correctly formatted in the TOC.
    Bernd

  • Numver format for readonly setted af:inputText

    Hello All,
    <af:inputText id="itTtlDue" readOnly="true" value="#{bindings.return.inputValue}"
    required="#{bindings.return.hints.mandatory}"
    columns="#{bindings.return.hints.displayWidth}"
    maximumLength="#{bindings.return.hints.precision}">
    How can I set display format for above tag?
    Note:
    When I execute above tag with a numerical value as "25.333333333336" , then it display as 25.333333333336.
    So it correct..!
    But how can I display it with formated output as #######.## (So result should be 25.33)
    Thanks.

    Hi
    you can use <af:convertNumber> tag with pattern attribute inside the your inputText
    <af:inputText id="itTtlDue" readOnly="true" value="#{bindings.return.inputValue}"
    required="#{bindings.return.hints.mandatory}"
    columns="#{bindings.return.hints.displayWidth}"
    maximumLength="#{bindings.return.hints.precision}">
    <af:convertNumber pattern=""#######.##>
    </af:inputText>

  • How Do I Change Default Chapter Numbers When Compressing for iPad?

    Basically, I'd like to export a program from a FCP 7 timeline with included chapter and compression markers and compress it using Compressor 3.5 or 4.  The program is intended for distribution via iPad and I'd like to include medical disclaimers and a production company logo prior to the start of the program.  The problem is that the chapter numbering seems to default to 1, 2, 3, etc. which makes the program's beginning read as Chapter 2.  Is there any way to reset the default first chapter marker to Chapter 0 or similar?  Or is there a way to do away with the automatic chapter numbering?

    I understand that the markers can be named in the timeline.  The problem I'm having is that, once the file is encoded and moved onto the iPad, the chapter names gain an additional number.  So in my case there is a marker at the beginning of the sequence that I've named Medical Disclaimers and another at the beginning of the program that I've named Program Start and a third marker that I've named Chapter 1.
    When the chapters display on the iPad it reads something like this:
    Chapter 1
    Medical Disclaimers
    Chapter 2
    Program Start
    Chapter 3
    Chapter 1
    You see my problem?  Chapter 3 / Chapter 1 doesn't really work. I can name the chapters anything I want in FCP, but as soon as they're loaded on the iPad they get a shiny new chapter number attached to them no matter what I do with the markers in FCP.  I can of course rename Chapter 1 so that it's not so obvious, but I'd still like the program to start at Chapter 1 rather than Chapter 2 (or, if possible, have no automatic chapter number generation at all).

  • Where does one manage date formats for display and input

    the user specification is that dates be displayed as YYYY-MON-DD. Is there a config or properties file which contains the date format for display? Is there a calendar drop-down that can be positioned next to a date input field for a question on a screen?
    Thanks,
    Allan

    Hi Allan,
    Curious why the rule project wasn't created with "English (Canada)" initially? If your project is English (UK) with the default configurations for that locale, then I assume your currency values are appearing in OWD with the GBP symbol (£) instead of a dollar sign ($)?
    As for the impact of switching… I highly recommend getting confirmation from the OPA Dev team before doing it, but in the meantime, if you wanted to experiment on your own with a separate test rulebase (as opposed to whatever formal rulebase you're working on), here are my observations from an initial look… (FYI, I'm an experienced OPA rulie, but I'm non-technical and not in the Dev team, so best to check with them!)
    I poked around the language parser files and saw that English (UK) has an English (UK) verb list, whereas English (Canada) uses the English (US) verb list. The vast majority of verbs are identical in all the variations of English, however, there are a couple which differ. So if you've used any verbs which have a different spelling between the 2 lists, there may be some attribute text to tweak, e.g.
    - English (UK): the person travelled to Australia
    - English (US): the person traveled to Australia
    - English (UK): the person cancelled the reservation
    - English (US): the person canceled the reservation
    I saw some other different files between English (Canada) vs English (UK), but didn't notice anything in them which I'd expect to impact the rulebase.
    As for how it might impact other components:
    * screens file and the properties file – May be some tweaking depending on how you addressed the verb spelling issue above.
    * regression test files – May be some tweaking depending on how you addressed the verb spelling issue above.
    * messages.(locale).properties – The default messages.(locale).properties file appears to be based on the Language setting of the Project. I just tested this and OWD used a different messages.(locale).properties file when I changed the Project Language (OPM | File menu | Project Properties | Common Properties | General | Language).
    * Siebel Connector – don't know what the impact would be.
    OPA Dev team – Can you review what I've said here? And add any relevant further detail?
    Cheers,
    Jasmine

  • Document Numbering Formats for Extended Fields

    Hi, experts.
         I want to create a document numbering formats for my extended fields.
         1) I want to add my document numbering format to Fine Tune Activity.
              2) I want something like this. But I want to add more fields to the following screen like a prefix and some other validations.
              3) I want to use that numbering formats for my extended fields.
                 Are those possible?
      Regards,
      Fred.

    Hi, Horst.
         Thanks,
         I read your docu. And tested the new feature.That's great.
         That is really a reasonable way to create number ranges.
         But here, what I want is to get a "numbering format" feature for my extension fields like the way I explained above.
    Regards,
    Fred.

  • 24 hour format for time display

    How does on comigure firefox os to display time in 24 hout format on the home screen?

    Hello,
    This is not currently possible for the English locale of the Firefox OS. In v1.0 the time format is tied to the locale:
    • 12h-format for en-US
    • 24h-format for pt-BR, es, fr
    There is a bug report discussing this here: [https://bugzilla.mozilla.org/show_bug.cgi?id=811242 Bug 811242]
    Hopefully this feature will be added in a future version of Firefox OS.
    I hope this helps.

  • Need help in query to display lot and serial numbers for a Wip Job Component

    Hi ALL,
    I have a requirement as below.
    I need to display lot and serial numbers for a Wip Job Component, i have a xml report in that for each wip job component i need to check whether it is a lot control item or serial control item based on that i need to display some data. so can you please help me to get the query to indentify the lot and serial number for a wip job component.
    Thanks

    Thank you for replying Gordon.  I did not remember I had asked this before.  I no longer have access to the other account. 
    What I need on the query is that I want  a list of items with the on order quantity and when we are expecting this order to be received.  The receiving date is based on the PO delivery date.  The trick here is that  I need to Master sku to show the delivery date of the component sku.  In my scenario all components have the same delivery date for the Master sku.  If there are mulitple delivery dates because each warehouse is getting them on a different date then I want to get the delivery date for that warehouse.
    Let me know if this is possible and if yes please guide towards a query for it.
    Thank you.

  • HT201272 I have numbers and pages on my iPhone but cannot seem to transfer them to the mac I purchased today ? Are they formatted for the iPhone only ? They appear to be downloaded but I cannot find them on the MAC - where should I look ?

    I have numbers and pages on my iPhone but cannot seem to transfer them to the mac I purchased today ? Are they formatted for the iPhone only ? They appear to be downloaded but I cannot find them on the MAC - where should I look ?

    Welcome to the Apple community.
    The apps you have purchased for your mobile device will not work on a computer. You will need to download the appropriate versions on your Mac from the Mac apps store.

Maybe you are looking for