Display Indictor value when boolean is true

Hey,
This ia a very basic issue I have been facing for quite some time and am unable to figure out a solution for this.
I have an indicator display that has to update the value it shows only whenever a boolean is ON. The indicator displays the average of ten samples, and has to update only after ten samples have been acquired. The boolean goes ON after the acquisition of every tenth sample.
I have tried keeping the indicator in a case structure, but it ends up displaying 0 all the time. I then tried to pass the wire through the case structure keeping the indicator outside, and even that didn't work.
Can you please suggest a solution ?
Thank you
Dheeraj Bharadwaj
IIT-Madras

It is not productive to provide an answer to a question that has not been asked. First you need to answer the actual question and at the end you could offer good arguments for alternative solutions. Here, we want to constantly display an average of 10 measurements. This is often a useful solution in the presence of noise, where the indicator would otherwise flicker too much. or where the actual update rate would be too fast to really see. It is silly to suggest to only show the indicator for an instant and then hide it most of the time. That would make no sense at all!
Ranjeet_Singh wrote:
Hiding an indicator is better becasue when user will see the indicator may be it was not updated. Hence will convey the wrong message. Hence after reading 10th data update and make the indicator visible
The indicator constantly shows the average of 10 measurement. That is NOT the wrong message but a value that is useful and exactly defined at all times. Right?
LabVIEW Champion . Do more with less code and in less time .

Similar Messages

Displaying hex values when editing a numeric control

The hex display is removed when editing a numeric control (in Control Settings) in cvi 2012. Is this a bug or am I missing something?
Solved!
Go to Solution.

I have informed our R&D department of the format of the control settings in CVI 2012 . I have filed a Corrective Action Request (CAR# 379345) on this issue, but can not guarantee when this behavior will be fixed. You can check if this issue has been fixed in future versions of CVI by looking for the CAR identification number listed previously in the CVI Bug Fix Information.
Regards,
Anjelica W.
National Instruments
Applications Engineer

Dynamic PDF field value doesn't display XFDF value when no keyboard focus

I created a simple PDF (test.pdf) file (one text field), and saved it as a "static PDF". I created a XFDF file, and when I double-click on the XFDF file, the sample PDF opens and the field is populated.
Here's the problem: I save test.pdf as a "dynamic pdf" file. I double-click on the xfdf file and the pdf opens up, but the data is not displayed in the field. If you click on the field, the text appears. If you click out of the field, it disappears. If you update the field value, and navigate away, the value stays.
There is nothing but the field on the page, no scripts, no subforms, nothing.
Is this a bug in Adobe Reader 7.0? or is there some weird setting in Live Cycle Designer that I'm missing?
Thanks

What is your xfdf file look like? Something like: <?xml version="1.0" encoding="UTF-8"?> <xfdf xmlns="http://ns.adobe.com/xfdf/" xml:space="preserve"> <f href="file:///C|/test3.pdf" /> <fields> <field name="firstName"> <value>William</value> </field> <field name="lastName"> <value>White</value> </field> </fields> </xfdf>

Calling and displaying BAPI values when the initial view is displayed

hi Gurus,
I am creating an application where I am calling a BAPI.
Now my problem is that the values should be called and displayed when I am starting the application ie in the first view itself.
Is there any way to execute the BAPI so as to retrieve the values from back end and get the values displayed in the initial screen/view.
Or else is there any onPageLoad method which can be used in such cases.
please help me how to go ahead.
Thanks and regards,
kris

Hi
Create a method in controller and insert the code,
wdContext.current<BAPI>Element().modelObject().execute();
And call the method in view, and check the size of BAPI's output node.If it is greater than 0, your BAPI is returning something. using any loop and get the Output
Saravanan K

FMS displaying previous value when refreshing by Total

Hi
I have a formatted search for a UDF that requires "Gross Profit (LC)" in its calculations but when I refresh regularly by either Document Total or Line Total it returns the previous gross profit value instead of the current one.
The reason I refresh by these values is because the FMS changes based on multiple conditions and this was suggested in a previous Forum post.
Re: Is it possible to auto refresh a FMS field based on multiple conditions?
All the other fields used in the FMS return the correct values except for the Gross Profit. Here is the FMS I used to test the values returned for Gross Profit.
select $[$38.123.number]
Example of values returned:
Original Gross Profit for an item: 8.52
Gross Profit after change of unit price: 9.52
When you enter an item the UDF displays 0
Change the unit price the UDF displays 8.52
Change the unit price back the UDF displays 9.52
I have tested this in multiple DBs using SAP BO 8.81 PL: 07
I would like to know why it does this and if there is workaround to this problem?
Thank you for your time.

Hi
Yes I have and it returns the correct value but unfortunately I can't use that because the FMS changes for multiple conditions that is why I'm trying to use Totals.
Thanks
Andrew

Displaying zero values when there was no data

There are two columns 'A' and 'B' in the report which has some values.IF there was no data in the report,it shows the following system message
+"No Results+
+ The specified criteria didn't result in any data. This is often caused by applying filters that are too restrictive or that contain incorrect values. Please check your Request Filters and try again. The filters currently being applied are shown below."+
My requirement was to shows the zero values instead of this message in the table format and should show the chart at 0 axis.
Please give me your inputs and help me finding the solution
Thanks in Advance.
Edited by: user10414249 on Dec 1, 2009 2:22 PM

Because a report with no records will not produce a record "with zeroes," you have to think of another way to let the client know that the report was produced successfully, but simply with no data. We faced this issue with auditing. If no report shows, how does the auditor know that there were no data rather than the report itself not working that day? So what I did is build a "NIL Report." It is a simple report that consists of two columns. The first column is the system date column. The second column is column in which in the fx button (edit formula), I put in a text like "There are no records for this day." The first column serves two purposes: one, to timestamp the report so the user knows what day the 'NIL Report" was generated, and two, to serve as a column because OBI requires at least one column for the report to run.
I also added a footer to the report which had the name of the original report in the left pane and the run date in the right pane. The Title View also contains the name of the original report. Now when viewed, this report has all the essentials to indicate to the user that 1) the report ran successfully; 2) the title of the original report so the client knows which report is associated with the "NIL Report"; and 3) the date the report was run to timestamp the report.
So in one of the two sections, in the Section>Properties, you will use the guid. nav. feature of the section to look at the ORIGINAL report, but this section will have the "If request returns nothing" checkbox" checked off. Put the "NIL Report" in this section. When the original report produces no records, this section will display so the client knows that there were no records.
This is what I mean by a "meaningful report" -- a report that conveys the necessary information to let the user know what is going on. There is no way (that I know) where you can have the original report display "zeroes" when in fact there are no records at all.
HTH,
David

Problem displaying the value zero in dashboard

Hello,
I have a problem displaying the value zero.
When I am Treat Numbers As number, the value that appears
When Treat Numbers As Percentage box is empty.
Can you tell me how to display this value when the criterion
is in percentage format.
thanks for answers
Best regards

cast the number as float or multiply by 1.00 e.g. 1.00 * table.column

When i change the value of a combo box using a property node it displays the value not the item label

I am using a combo box as a select list for text serial commands. I have items like "engineering", "GUI", and "Scan" for the commands "MDE", "MDN", and MDS respectively which i have input as the corresponding value in the combo box. so for example the label "engineering" has the value "MDE" in the combo box items list. when the Vi starts it needs to read the current value MDE, MDN, or MDS and then i want it to display on the front panel the item text corresponding to that command value.
To do this i have tried to read the serial command, ie MDS and then wire that to a "value" property of a property node of the combo-box, but instead of displaying the corresponding item label, "Scan", it displays the value "MDS" on the front panel instead. i want the front panel to use the label text when choosing and displaying but the block diagram to use the serial commands. Can this be done with a combo box? I'm trying to use a combo box so i can keep it all text and avoid having to build a case statement to convert enums or rings from a numerical value to the text command.
The correct text value is wired to the value property and it does exist in the combo-box. I have unchecked "values match items" and selected to not allow undefined values.

Don't use the value property node. Use the Text.Text property node. When creating the property node, select Text, then in the next pop-up box, select Text.
- tbob
Inventor of the WORM Global

How to update zero to a column value when record does not exist in table but should display the column value when it exists in table?

Hello Everyone,
How to update zero to a column value when record does not exist in table but should display the column value when it exists in table
Regards
Regards Gautam S

As per my understanding...
You Would like to see this
Code:
SELECT COALESCE(Salary,0) from Employee;
Regards
Shivaprasad S
Please mark as answer if helpful
Shiv

Dump when trying to display characteristic values in QUERY DESIGNER

Hi Experts,
Life seems to become a struggle with 7.0 for me :-(.
My current problem:
If I try to display characteristic values in Query Designer (left section of screnn, wthin dimensions) system dumps frequently.
It's that kind of dump, that doen't help really (to my oponion)_
What happened?
    The exception 'CX_RSR_X_MESSAGE' was raised, but it was not caught anywhere
     along
    the call hierarchy.
    Since exceptions represent error situations and this error was not
    adequately responded to, the running ABAP program
     'CL_RSBOLAP_BICS_SERVICES======CP' has to be
    terminated.
How to correct the error
    If the error occures in a non-modified SAP program, you may be able to
    find an interim solution in an SAP Note.
    If you have access to SAP Notes, carry out a search with the following
    keywords:
    "UNCAUGHT_EXCEPTION" "CX_RSR_X_MESSAGE"
    "CL_RSBOLAP_BICS_SERVICES======CP" or "CL_RSBOLAP_BICS_SERVICES======CM003"
    "HANDLE_UNCAUGHT_EXCEPTION"
... etc.
BW 79, SP21
GUI 7100.4.14.3136
Any ideas?
Thanks in Advance and Regards
Joe

Hi Vikram,
Thanks for reply. Reinstalling GUI was successful, but - error still occurs. ..
Regards
Joe
Edited by: J.F.B. on May 28, 2010 3:02 PM

StageWebView(useNative = true) displays a blank when running on Mac OS if renderMode is set to direct or gpu

Dear Adobe AIR Team,
I've already submitted the bug report, and it's already got 10 votes and counting:
Bug#3829934 - StageWebView displays a blank when running on Mac OS if renderMode is set to direct or gpu
Please take 5 minutes of your time to look at this bug, thanks so much!
DarkStone
2014-09-24

Despite the fact that changing hostnames after the machine is booted is not a great idea, you're making it hard for yourself.
NetBoot already has the ability to set hostnames for each client. There's a clue in Apple's Knowledgebase Article on the subject, as well as in the Mac OS X Server manuals, namely:
Optional: Click Sharing Prefs and in the Computer Name field, type the name that the NetBoot or Network Install client gets after installation or booting. Note: Each client will have its computer name and local hostname set to the name you supplied plus the MAC address (without the colons) of the client. Note: Alternatively, type the path to a tab-delimited .txt or .rtf file that has a list of MAC addresses and their corresponding computer names and local hostnames. Each client will get the name that corresponds to its MAC address in the specified file.
So you just need to build a .txt file map of MAC addresses to hostnames, then point your NetBoot image to that.

Dialogue tick boxes un-hiding all fields, not just the ones where value has changed to true

I am hoping someone can help me make what I want to happen, happen if certain check boxes are ticked withing the dialogue box
right now I can see on the console print that the tick box turns the value from false to true but the OK button is also un-hiding all my fields rather than just the ones where the value has turned to true. What am I missing here
//Create a Dialogue box for staff to state how many of the account owners are in branch in order for the names to show in the signing section
var Signors =
    result:"cancel",
    DoDialog: function(){return app.execDialog(this);},
    bChk2:false,
    bChk3:false,
    bChk4:false,
    bChk5:false,
    initialize: function(dialog)
        var dlgInit =
                "Chk2": this.bChk2,
                "Chk3": this.bChk3,
                "Chk4": this.bChk4,
        dialog.load(dlgInit);
    commit: function(dialog)
        var oRslt = dialog.store();
        this.bChk2 = oRslt["Chk2"];
        this.bChk3 = oRslt["Chk3"];
        this.bChk4 = oRslt["Chk4"];
    description:
        name: "Signors",
        elements:
                type: "view",
                elements:
                        type: "view",
                        char_height: 10,
                        elements:
                                type: "static_text",
                                item_id: "stat",
                                name: "Who is here to sign:",
                                char_width: 15,
                                alignment: "align_fill",
                                font: "dialog",
                                type: "view",
                                char_width: 8,
                                char_height: 8,
                                align_children: "align_top",
                                elements:
                                        type: "view",
                                        char_width: 8,
                                        char_height: 8,
                                        elements:
                                                type: "check_box",
                                                item_id: "Chk2",
                                                name: "Primary Applicant",
                                                type: "check_box",
                                                item_id: "Chk3",
                                                name: "Associate 1",
                                                type: "check_box",
                                                item_id: "Chk4",
                                                name: "Associate 2",
                        type: "ok_cancel",
// did the value change when ticked - lets check
Signors.bChk2 = false;
Signors.bChk3 = false;
Signors.bChk4 = false;
if("ok" == Signors.DoDialog())
    if (Signors.bChk2 = true)
getField("Signor1").hidden = false;
getField("Staff1").hidden = false;
getField("Date1").hidden = false;
getField("Date2").hidden = false;
if (Signors.bChk3 = true)
getField("Signor2").hidden = false;
getField("Staff2").hidden = false;
getField("Date3").hidden = false;
getField("Date4").hidden = false;
if (Signors.bChk4 = true)
getField("Signor3").hidden = false;
getField("Staff3").hidden = false;
getField("Date5").hidden = false;
getField("Date6").hidden = false;
    console.println("Chk2:" + Signors.bChk2);
    console.println("Chk3:" + Signors.bChk3);
    console.println("Chk4:" + Signors.bChk4);
    console.println("Chk5:" + Signors.bChk5);
//console.println shows if bChk.. is true or false
    console.println("Chk2:" + Signors.bChk2);
    console.println("Chk3:" + Signors.bChk3);
    console.println("Chk4:" + Signors.bChk4);
    console.println("Chk5:" + Signors.bChk5);
//Yeah, confirmed values have changed, now show fields based on staff input
//was primary applicant ticked
doWhatIWant: function(results) {
if (results [Signors.bChk2] = true)
getField("Signor1").hidden = false;
getField("Staff1").hidden = false;
getField("Date1").hidden = false;
getField("Date2").hidden = false;
//was Associate 1 ticked
if (results [Signors.bChk3] = true)
getField("Signor2").hidden = false;
getField("Staff2").hidden = false;
getField("Date3").hidden = false;
getField("Date4").hidden = false;
//was Associate 2 ticked
if (Signors.bChk4 = true)
getField("Signor3").hidden = false;
if (Signors.bChk4 = true)
("Staff3").hidden = false;
if (Signors.bChk4 = true)
("Date5").hidden = false;
if (Signors.bChk4 = true)
("Date6").hidden = false;

You're missing some curly brackets, using the incorrect equality operator, and using the long deprecated field.hidden property. Try this:
if ("ok" == Signors.DoDialog()) {
    if (Signors.bChk2) {
        getField("Signor1").display = display.visible;
        getField("Staff1").display = display.visible;
        getField("Date1").display = display.visible;
        getField("Date2").display = display.visible;
    if (Signors.bChk3) {
        getField("Signor2").display = display.visible;
        getField("Staff2").display = display.visible;
        getField("Date3").display = display.visible;
        getField("Date4").display = display.visible;
    if (Signors.bChk4) {
        getField("Signor3").display = display.visible;
        getField("Staff3").display = display.visible;
        getField("Date5").display = display.visible;
        getField("Date6").display = display.visible;
    console.println("Chk2:" + Signors.bChk2);
    console.println("Chk3:" + Signors.bChk3);
    console.println("Chk4:" + Signors.bChk4);
    console.println("Chk5:" + Signors.bChk5);
I don't know if that will deal with all of the problems, but it's a good start.

How to set default values for boolean columns

I'm trying to deploy some content types and columns into a site with a feature. All it's ok, except that I'm trying to set a default value for boolean columns with no success.
I've tried to set default value at column level:
<Field ID="{EFE23A1D-494E-45cf-832E-45E41B17F0CF}" Name="ScopeSpanish" DisplayName="Se publican noticias en español"
Type="Boolean" Hidden="FALSE" Group="Columnas ShaCon" >
<Default>TRUE</Default>
</Field>
and at content type level:
<FieldRef ID="{EFE23A1D-494E-45cf-832E-45E41B17F0CF}" Name="ScopeSpanish" DefaultValue="TRUE" Required="TRUE" />
But in any case, when i create a new item with this content type, default value is applied.
Can anyone tell how to set default values for boolean columns?
Thanks in advance,
Regards,
Sergio

In the field definition you can set
<Default>1</Default>
or
<Default>0</Default>
How to set the default value Null?

Conditional read only radiogroup item losing value when saving

Apex 3.2
I have a radiogroup item that is set to read only after it's populated and the user is not in the ADMIN Role. When non ADMIN users edit the page, it shows the value and they cannot change it, but if they save the page, it loses the value. Works fine if the user has ADMIN role.
This is the Pl/SQL function in the "Item is read only when" section
begin
if :p3_event_detail_id is not null and :p3_notification_period_id != -1 and not apex_util.public_check_authorization('ADMIN') then
return true;
else
return false;
end if;
end;
There is also a Not Null validation on this radiogroup item.
I changed the item type to select list and it works fine, but user like the radiogroup button.
Any ideas?

It's using a shared component LOV cleverly called LOV_YN which consists of a static LOV with
1 Display=Yes, Return=Y
2 Display=No, Return=N
The settings in the LOV section on the item iteself:
Named LOV: LOV_YN
Display Extra values: No Dynamic translation: Not translated
Number of columns: 2 Display null: No
Null display value is blank as is null return value
Item was setup as a radio group and was only converted over to a select list to work around this issue. Let me know what else you need and thanks again.
Rgds/Mark M.

I want to display a text when button pressed

Hi guys
I want to display a text when a button is pressed , but the compiler says cannot resolve variable text ,can you please help me
here is my program
import java.awt.Color .*; import java.awt .*; import java.awt.event.*; import java.awt.event.*; import javax.swing.*; import javax.swing.JTable.*; public class sannaa extends JFrame implements ActionListener {[code] public sannaa( ) {
super("�� " ); setLayout(new FlowLayout()); TextField text = new TextField(20); JButton ok=new JButton( "return" ); add(text); ok.addActionListener(this);
Container contentPane = getContentPane( );
JLabel hellolabel=new JLabel("google"); hellolabel.setForeground(Color.black); hellolabel.setBackground(Color.blue); String[ ] columnNames =
{"First Name", "Last Name", "Sport",
 "# of Years",
 "Vegetarian"};
 Object [ ][ ] data =
{"Mary", "Campione", "Snowboarding", new Integer(5), new Boolean(false)},
{"Alison", "Huml", "Rowing", new Integer(3), new Boolean(true)},
{"Kathy", "Walrath", "Knitting", new Integer(2), new Boolean (false)},
{"Sharon", "Zakhour", "Speed reading", new Integer(20), new Boolean(true)},
{"Philip", "Milne", "Pool", new Integer(10), new Boolean(false)} };
JTable table = new JTable(data, columnNames); JButton enter=new JButton( "search" ); ok.setBackground(Color.pink); ok.setForeground(Color.white); JFrame frame=new JFrame("EL "); enter.setMaximumSize(new Dimension(900,
 100)); enter.setForeground(Color.blue); contentPane.setBackground( Color.white); for(int i=0;i<10;i++) {[code]JButton rami=new JButton( ""+ "" +i );
contentPane.add(rami);
rami.setBackground(Color.blue); }
contentPane.add(ok);
JPanel panel=new JPanel(new BorderLayout(500,500) ); contentPane.setLayout(new FlowLayout( )); contentPane.add(panel); panel.add(enter, BorderLayout.PAGE_START); panel.add(table, BorderLayout.PAGE_START); panel.add(hellolabel, BorderLayout.PAGE_START); panel.setBackground( Color.white ); panel.setLayout(new BorderLayout()); panel.add(table.getTableHeader(),BorderLayout.PAGE_START ) panel.add(table, BorderLayout.CENTER); panel.add(hellolabel,BorderLayout.PAGE_END); setVisible(true); }
public void actionPerformed(ActionEvent e ) { [code] text.setText("Button Clicked ");
public static void main (String [] args) {[code] sannaa van=new sannaa( );
} }

Thanks
I have changed my program to the following and its compiled truely, but when I press thte button in the application no text appeared?
help me please
import java.awt.Color .*; import java.awt .*; import java.awt.event.*; import java.awt.event.*; import javax.swing.*; import javax.swing.JTable.*; public class sannaa extends JFrame implements ActionListener {
public sannaa( ) {
super("�� " ); JButton ok=new JButton( "return" );
ok.addActionListener(this);
Container contentPane = getContentPane(
JLabel hellolabel=new JLabel("google");
hellolabel.setForeground(Color.black); hellolabel.setBackground(Color.blue);
 String[ ] columnNames =
{"First Name", "Last Name", "Sport",
 "# of Years",
"Vegetarian"};
 Object [ ][ ] data =
{"Mary", "Campione", "Snowboarding", new Integer(5),
new Boolean(false)},
{"Alison", "Huml", "Rowing", new Integer(3), new
Boolean(true)},
{"Kathy", "Walrath", "Knitting", new Integer(2),
new Boolean (false)},
"Sharon", "Zakhour", "Speed reading", new
Integer(20), new Boolean(true)},
{"Philip", "Milne", "Pool", new Integer(10),
new Boolean(false)} };
JTable table = new JTable(data,
columnNames); JButton enter=new JButton( "search"
 ); ok.setBackground(Color.pink); ok.setForeground(Color.white); JFrame frame=new JFrame("EL "); enter.setMaximumSize(new Dimension(900,
100));
enter.setForeground(Color.blue); contentPane.setBackground( Color.white);
for(int i=0;i<10;i++) { [code]JButton rami=new JButton( ""+ "" +i );
contentPane.add(rami);
rami.setBackground(Color.blue); }
contentPane.add(ok);
JPanel panel=new JPanel(new
BorderLayout(500,500) ); contentPane.setLayout(new FlowLayout(
)); contentPane.add(panel); panel.add(enter, BorderLayout.PAGE_START);
panel.add(table,
BorderLayout.PAGE_START); panel.add(hellolabel,
 BorderLayout.PAGE_START); panel.setBackground( Color.white ); panel.setLayout(new BorderLayout()); panel.add(table.getTableHeader(),BorderLayout.PAGE_START ) ;
 panel.add(table, BorderLayout.CENTER);
panel.add(hellolabel,BorderLayout.PAGE_END);
 setVisible(true); }
public void actionPerformed(ActionEvent e )
{ [code] TextField text=new TextField ("") ;
text.setText("Button Clicked "); }
public static void main (String [] args)
sannaa van=new sannaa( ); } }

Display Indictor value when boolean is true

Similar Messages

Maybe you are looking for