Dump when trying to display characteristic values in QUERY DESIGNER

Hi Experts,
Life seems to become a struggle with 7.0 for me :-(.
My current problem:
If I try to display characteristic values in Query Designer (left section of screnn, wthin dimensions) system dumps frequently.
It's that kind of dump, that doen't help really (to my oponion)_
What happened?
    The exception 'CX_RSR_X_MESSAGE' was raised, but it was not caught anywhere
     along
    the call hierarchy.
    Since exceptions represent error situations and this error was not
    adequately responded to, the running ABAP program
     'CL_RSBOLAP_BICS_SERVICES======CP' has to be
    terminated.
How to correct the error
    If the error occures in a non-modified SAP program, you may be able to
    find an interim solution in an SAP Note.
    If you have access to SAP Notes, carry out a search with the following
    keywords:
    "UNCAUGHT_EXCEPTION" "CX_RSR_X_MESSAGE"
    "CL_RSBOLAP_BICS_SERVICES======CP" or "CL_RSBOLAP_BICS_SERVICES======CM003"
    "HANDLE_UNCAUGHT_EXCEPTION"
... etc.
BW 79, SP21
GUI 7100.4.14.3136
Any ideas?
Thanks in Advance and Regards
Joe

Hi Vikram,
Thanks for reply. Reinstalling GUI was successful, but - error still occurs. ..
Regards
Joe
Edited by: J.F.B. on May 28, 2010 3:02 PM

Similar Messages

All Dates displayed for "Characteristic Values" in Query Designer

Hello Experts,
We are on BI 7.0, level 13. I am having an issue within the Query Designer with regards to dates. I have a write-optimized DSO that contains 3 date fields (for example, ZDATE1, ZDATE2, and ZDATE3). Each date InfoObject is of type DATS so the system automatically creates it with reference to 0DATE.
When I create a query in the Query Designer, on the left hand side, I expand the "Characteristic Values" node under each date field. The Query Designer shows the same list of values for each of the 3 dates even though they are not valid values posted in the DSO for those fields.
For example, ZDATE1 only has 1 value posted in the DSO (01/01/2005).
ZDATE2 only has 1 value posted in the DSO (01/01/2006).
ZDATE3 only has 1 value posted in the DSO (01/01/2007).
Bute when I expand the "Characteristic Values" node in the Query Designer, I see ALL THREE values under each date field. I would expect to only see the 1 value posted for the InfoObject in the DSO. Also note that each InfoObject is defined to show "Only posted values in InfoProvider".
It appears that Query Designer will show all values for the reference InfoObject 0DATE instead of the ones posted to the actual InfoObject in the DSO. If I delete the data in the DSO, the Characteristic Values list still remains because they exist in 0DATE. Anyone encounter this before? How can I get the Characteristic Values list to only show posted values for that InfObject?
Thanks for your help!
J

Thanks for the response. I went into the DSO and right clicked on each of the Date fields. I looked at the Provider-specific properties and there is the option for "Query Exec.FilterVal" which only restricts what values appear when restricting during execution, not during query creation.
Is there someplace else I should look or someplace else I can make change to only display posted dates when creating a query? Thanks!

Short Dump when trying to display transformations.

hello Experts,
When I am trying to display the rule details in the transformations i am facing the follwing shortdump messages. I just want to see the rooutine in the rule details of the transformation.Could you please help me to resolve this issue.
"MESSAGE_TYPE_X" " "
"CL_RSTRAN_STEP_ROUT===========CP" or "CL_RSTRAN_STEP_ROUT===========CM008"
"MAINTAIN_ROUT"
Regards,

Step 1: After u see the error message when you open the transformation, try TC su53. This will tell you if you are missing any authorization.
Step2 : If everything is fine! Is your Tran 'deactivated' id 'white' in color ? Activate you source n target again & try to open the TRAN

Hide a row or column for characteristic value # in Query Designer

Hi gurus,
I would if we could hide a result row / column if one of the characteristic value is #. The requirement is actually to remove the meaningless row / column from the whole result set. For example, I have a char Material Group in the column. Since not every Material is assigned to a Material Group, I will get the following layout:
Material_Group A
Material_Group B
Material_Group C
Is it possible to define in query designer so that the column with # will automatically not be displayed?
Thanks,
Meng

Hi Meng,
I guess we have the same users..
But there is one thing that is going to make a non sense on the report: if you do not display the "#" for material group, then the total of your query by material group will not be the summation of what is displayed on the screen...and if the user explort the information in Excel (pretty sure they will do so), you will have some calls that your query does not balance....
Based on that assumption, tell the users to assign a material group to the materials, so that this unassigned column disappears. You could even give them a control report listing all the parts that do not have a material group
If this is a standard business rule not to have a material group for all parts, then, what you could do is to change the text for empty rows for Material group, then the "#" will disappear and wil be under the text description you defined.
But keep in mind that your data is made of materials which do not have a material group in their definition, noraml or not ?
PY

Released Notification to Approver dumps when trying to display

Hi Guys!
We have in place N Step approval workflow and configured the system that approvers get a notification when the shopping cart is released.
This works fine.
But when the recipeints open their Inbox this notification is executable (What function is behind this?) When the recipients click on the notification in their Inbox the error message ".....BC/BSP/SAP/SMART_FORMS/DEFAULT.CSS is not available". Even when Service SMART_FORMS was activated in SICF the error message persists. I can find the Service SMART_FORMS but I cannot fine "DEFAULT.CSS". How can I fix this? What function is expected when the notification will be executed?
Rgds.
Dieter

Hi Muthu,
that was very helfull. I get this message when a notification (not workitem!) is sent to the approver when the shopping cart is released. This is a standard task within WS14500015 or WS14500015. I don't know the the task number because its weekend and I don't have access to the system now, can give you details on Monday
But I'm still not clear what I have to do. I guess my css is "DEFAULT.CSS" the same as error message populates it but its unclear to me. How can I find this out? Does that mean I have to develop something or is it just configuration in the ICF Service "SMART_FORMS. I don`t understand your link to SAP Help properly because I don`t have experience in Smart Forms. Any advice is appreciated. What I think is that when you click on that notification the details of the released shopping cart should be displayed. Therfore a Web enabled Smart Form is used. We did not make any modifications to this task it'sSAP standard procedure and I would have expected that it works without any development.
Rgds.
Dieter

Getting error message when trying to display error messages on a ProfilePage

Hi All,
I'm getting following error message when trying to display error on a Profile page.
On page i'm seeing this:
     org.apache.jasper.JasperException: java.lang.IllegalStateException: getOutputStream() has already been called for this response
          org.apache.jasper.servlet.JspServletWrapper.handleJspException(JspServletWrapper.java:515)
          org.apache.jasper.servlet.JspServletWrapper.service(JspServletWrapper.java:405)
In condole, i'm seeing this:
     18:23:00,206 ERROR [[jsp]] Servlet.service() for servlet jsp threw exception
          java.lang.IllegalStateException: getOutputStream() has already been called for this response
             at org.apache.catalina.connector.Response.getWriter(Response.java:621)
             at org.apache.catalina.connector.ResponseFacade.getWriter(ResponseFacade.java:198)
Please let me know what could be the reason.
Thanks,
Vishnu

HI David And Nitin,
Here is the code using which i'm trying to display the error messages on registration page, but this code fragment is outside registration form will that cause any problem?
<dsp:droplet name="Switch">
<dsp:param name="value" bean="ProfileFormHandler.formError"/>
<dsp:oparam name="true">
<table>
<dsp:droplet name="ProfileErrorMessageForEach">
<dsp:param name="exceptions" bean="ProfileFormHandler.formExceptions"/>
<dsp:oparam name="output">
<tr style="color: red">
<td><dsp:valueof param="message"></dsp:valueof></td>
</tr>
</dsp:oparam>
</dsp:droplet>
</table>
</dsp:oparam>
</dsp:droplet>
Thanks,
Vishnu

Error when trying to display a report

Hi,
when trying to display a report in Forms 11g 11.1.1.4 the window do not shows anything, the weblogic 10.3.4 is installed on Windows Server 2008 R2
The logs i saw are these, what could be the reason of the error, what should i do to fix it ??
rwserver_diagnostic.log
[2012-11-13T06:10:13.861-08:00] [WLS_REPORTS] [WARNING] [] [oracle.reports.server] [tid: 15] [userId: weblogic] [ecid: 8d029db4c88cfa6e:72f4635e:13ab3dc02b9:-8000-000000000000ccd7,0] [APP: reports#11.1.1.2.0] Multicast:init java.net.SocketException: Unrecognized Windows Sockets error: 0: no Inet4Address associated with interface
[2012-11-13T06:10:13.861-08:00] [WLS_REPORTS] [WARNING] [] [oracle.reports.server] [tid: 15] [userId: weblogic] [ecid: 8d029db4c88cfa6e:72f4635e:13ab3dc02b9:-8000-000000000000ccd7,0] [APP: reports#11.1.1.2.0] Multicast:init java.net.SocketException: Unrecognized Windows Sockets error: 0: no Inet4Address associated with interface
rwservlet_diagnostic.log
[2012-11-13T06:10:10.272-08:00] [WLS_REPORTS] [WARNING] [] [oracle.reports.servlet] [tid: 11] [userId: weblogic] [ecid: 8d029db4c88cfa6e:72f4635e:13ab3dc02b9:-8000-000000000000ccd7,1:29117] [APP: reports#11.1.1.2.0] Multicast:init java.net.SocketException: Unrecognized Windows Sockets error: 0: no Inet4Address associated with interface
[2012-11-13T06:10:10.288-08:00] [WLS_REPORTS] [WARNING] [] [oracle.reports.servlet] [tid: 11] [userId: weblogic] [ecid: 8d029db4c88cfa6e:72f4635e:13ab3dc02b9:-8000-000000000000ccd7,1:29117] [APP: reports#11.1.1.2.0] Multicast:init java.net.SocketException: Unrecognized Windows Sockets error: 0: no Inet4Address associated with interface
[2012-11-13T06:10:13.689-08:00] [WLS_REPORTS] [WARNING] [] [oracle.reports.servlet] [tid: 11] [userId: weblogic] [ecid: 8d029db4c88cfa6e:72f4635e:13ab3dc02b9:-8000-000000000000ccd7,1:29117] [APP: reports#11.1.1.2.0] RWClient:startInProcessServer start inprocess server rep_wls_reports_srvweblogic_asinst_1
[2012-11-13T06:10:14.656-08:00] [WLS_REPORTS] [WARNING] [] [oracle.reports.servlet] [tid: 15] [userId: weblogic] [ecid: 8d029db4c88cfa6e:72f4635e:13ab3dc02b9:-8000-000000000000ccd7,0] [APP: reports#11.1.1.2.0] Multicast:init java.net.SocketException: Unrecognized Windows Sockets error: 0: no Inet4Address associated with interface
[2012-11-13T06:10:14.656-08:00] [WLS_REPORTS] [WARNING] [] [oracle.reports.servlet] [tid: 15] [userId: weblogic] [ecid: 8d029db4c88cfa6e:72f4635e:13ab3dc02b9:-8000-000000000000ccd7,0] [APP: reports#11.1.1.2.0] Multicast:init java.net.SocketException: Unrecognized Windows Sockets error: 0: no Inet4Address associated with interface
WLS_REPORTS-diagnostic.log
[2012-11-09T13:44:41.421-08:00] [WLS_REPORTS] [NOTIFICATION] [] [oracle.reports.adminlogconfig] [tid: [ACTIVE].ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'] [userId: <WLS Kernel>] [ecid: 0000Jfb8SNZ4YrWFLziOOA1GbN_0000002,0] [APP: reports#11.1.1.2.0] LogConfig.load: logging.xml
[2012-11-13T06:10:14.032-08:00] [WLS_REPORTS] [NOTIFICATION] [] [oracle.security.oes.util.logging.Log4jConfigurator] [tid: Thread-36] [userId: weblogic] [ecid: 8d029db4c88cfa6e:72f4635e:13ab3dc02b9:-8000-000000000000ccd7,0] Could not find log4j configuration for MicroSM.
[2012-11-13T06:10:14.235-08:00] [WLS_REPORTS] [NOTIFICATION] [JPS-03258] [oracle.jps.authorization.provider] [tid: Thread-36] [userId: weblogic] [ecid: 8d029db4c88cfa6e:72f4635e:13ab3dc02b9:-8000-000000000000ccd7,0] Initializing UserUtils; mbean: com.bea.security.providers.authorization.asi.ASIAuthorizationProviderMBeanImpl@f6467a1e([ASI Authorization Provider]), instance: null
[2012-11-13T06:10:14.235-08:00] [WLS_REPORTS] [NOTIFICATION] [JPS-03258] [oracle.jps.authorization.provider] [tid: Thread-36] [userId: weblogic] [ecid: 8d029db4c88cfa6e:72f4635e:13ab3dc02b9:-8000-000000000000ccd7,0] Initializing UserUtils; using directory: RootOrg!AdminDir, anonymous user: anonymousRegards
Carlos

This is not really the correct forum to be posting Reports issues. However, if I were to guess, your issue is likely related to the known issues related to installing FMw11R1 on machines which had IPv6 enabled. In most cases, disabling IPv6 would correct the problem, however some issues were not resolved even after disabling IPv6 post-install. I would recommend patching to WLS 10.3.6 and FMw 11.1.1.6 as these versions include fixes for all of those issues as far as I recall.
Consider referring to this MyOracleSupport document if you have access:
Steps to Maintain Oracle Fusion Middleware 11g Release 1 (11.1.1) (Doc ID 1073776.1)

"Output could not be issued" when trying to display the layout of the order

"Output could not be issued" error comes when trying the display layout of the order confirmation.
Thanks

Hi,
This error is faced generlly when output type has not been assigned to the document type.In sales order Follow the path
Goto-Extras-Output-Header-Edit.
Here mention the output type and communication medium and save the document.
Now try to issue the output.
I assume that you have maintain the output determination procedure in SPRO.
For automatic determination of output maintain the output condition record
Reward points if useful
Regards,
Amrish Purohit

When trying to display census pages I get error ActiveX controls missing

What are ActiveX controls and how can I install them? When trying to display certain images such as a census page I get the message that certain ActiveX controls are missing. I am using Windows XP and the current version of Firefox.

ActiveX is an Internet Explorer plugin system and will not work in Firefox or many other browsers. If the site requires ActiveX you will need to use Internet Explorer to access the site.

MSS UCF_AcroForm error displayed when trying to display form in PCR

I receive a pop-up UCF_AcroForm error when trying to display a PCR form. I believe it is a configuration problem. I wonder if anyone has ever received this type of error before, and if yes, how was it solved. Thank you.
Edited by: Emmanuel Filosi on May 9, 2008 5:41 PM

I have found a way to get rid of this by configuring my ADS Service (thanks to my colleague N.Pothuraj)
Creating an ADS Service:
========================
1) Add the following java settings for the server in the offline config tool
"Dorg.omg.PortableInterceptor.ORBInitializerClass.com.sap.engine.services.ts.jts.ots.PortableInterceptor.JTSInitialize". Restart the server after the settings
2) create the ADS User in the R/3 system.
3) create the destination of type "HTTP connection to External Server"service between R/3 and the ADS user.
4) Define the destination service under destinations>HTTP>FP_ICF_DATA
    URL:http://usai4qpt.wdf.sap.corp:50077
    User: ADSUser ( ADS_AGENT1 in my case)
    pwd: initial ( in my case)
This destination service is to establish the connection between R/3 and WebDynpro J2EE server
5) Active the webservice clients ( establish connection between ADS server and the WebDynpro J2EE server. This is the case only when the WebDynpro J2EE server and the ADS server are different, other use teh default URL service ).
com.sap.tc.webdynpro.adsproxy.AdsProxy*ConfigPort_Document is the service, under custom type user the below mentioned URL http://pwdf3092.wdf.sap.corp:50090 /AdobeDocumentServices/Config?style=rpc ( Remote ADS server )
username: adsuser2 (Login for the remote ADS server)
pwd:adobeads123    (Password for the remote ADS server)

COIS024 When trying to display the goods movement in COR2/COR3

Gents,
the system is issuing a COIS024 message (There is no data for the selection) when trying to display the documented goods movements for any process order. The order has both GI & GR. The message is also refering to OPJB saying we should set the type of this message to S in OPJB.
Any ideas why this is happening, or better a solution?
Regards,
Kenneth

Hi,
2 things:
1. In COR4, for plant - order type combination check in implementation tab if you have flagged the check boxes under documentation of goods movement. If it is not done, then flag the same, then all future goods movement will be documented.
2. If the above is done, then run SU53 & check if you have some authorization issue.
Regards,
Vivek

Error when trying to Display WSDL for Sender Agreement

Hi,
I'm getting an error when trying to display WSDL for a sender agreement. The error message is as follows:
Adapter Engine af.xxx.yyy for communication channel not registered in SLD Unable to find the SLD element (SAP_XIAdapterFramework, [CreationClassName, SAP_XIAdapterFramework, string, Name, af.xxx.yyy, string], [AdapterType, SOAP, string])
The SOAP adapter being used is from the non-central AE. I I immediately checked for inconsistent SLD components per note 746176 but everything is in order there. I tried re-registering manually the non-central AE manually as well.
Anyone else ever had the same error? Any hints much appreciated!

Hi Luqman,
go to the sender channel and replace the Adapter Type.
Select the type as SOAP from SWCV SAP BASIS 7.xx or SAP BASIS 3.0
The channel is referring to a swcv which is not present in esr.
As you might know, the adapter metadata is fetched from ESR/IR, so if the SWCV containing the metadata inside namespace http://sap.com/xi/XI/System etc, is not available then it will throw error.
If you do not want to change the Adapter Type in the channel, import the swcv from SLD to ESR and create/import the respective adapter metadata.
Should resolve your issue.
Cheers!
Souvik

Dump when trying to create FI-SL planning layout

I get a dump when trying to create an FI-SL plannign layout. See details below.
Runtime Errors         MESSAGE_TYPE_X
Date and Time          27.07.2010 13:02:45
Short text
     The current application triggered a termination with a short dump.
What happened?
     The current application program detected a situation which really
     should not occur. Therefore, a termination with a short dump was
     triggered on purpose by the key word MESSAGE (type X).
Error analysis
     Short text of error message:
     Combination ledger-version not allowed
     Long text of error message:
     Technical information about the message:
     Message class....... "GLPL"
     Number.............. 710
     Variable 1.......... " "
     Variable 2.......... " "
     Variable 3.......... " "
     Variable 4.......... " "
Trigger Location of Runtime Error
     Program                                 SAPLKPP_FISL
     Include                                 LKPP_FISLU08
     Row                                     69
Module type                             (FUNCTION)
Module Name                             G_PP_DIMENSIONS_FILL
ce Code Extract
SourceCde
9 ************************************************************************
0 * T8PL01 : fill dimensions
1 ************************************************************************
2 *
3   REFRESH: itkpp0d.
4   CLEAR : itkpp0d.
5 *
6   SELECT * FROM t8pl01
7            WHERE
8            appl     = appl     AND
9            subclass = subclass AND
0            tabname = tabname.
1     MOVE-CORRESPONDING t8pl01 TO itkpp0d.
2     MOVE t8pl01-hierlevel TO itkpp0d-level.
3     IF NOT t8pl01-fieldname = 'RACCT'.
4       t8pl01-dinit = 'X'.
5     ENDIF.
6     APPEND itkpp0d.
7   ENDSELECT.
8   EXPORT itkpp0d TO MEMORY ID 'ITKPP0D'.
9 *
0 * Check if WER
T-dimension is available in the present set of
1 * dimenions.
2 *
3   READ TABLE itkpp0d WITH KEY dim_werte.           "Kein Binary Search
And so on and so fourth. Please what could the problem be?

Hi,
You type wrong tcode name. The correct name is: GLPLINSTALL
Detail in Sapnote 757269.
Regards,
Thanh.
Edited by: Thanh Tu Van on Nov 8, 2010 5:27 AM

Value for a characteristic changed with an other value in Query Design

I want to change the value for a characteristic (Type) in Query Design (not the description, the value).
In my cube I have these values:
Customer *** Type
22222********SmallCorp
22223********SmallCorp
22224********MedCorp
The report should like:
Customer *** Type
22222********LEGALENTITIES
22223********LEGALENTITIES
22224********LEGALENTITIES
Or only the "SmallCorp" value should be changed in LEGALENTITIES.
How to do that?
Thanks,
Dragos

You can write an exit to replace Type SmallCorp to LEGALENTITIES.
But this will reflect in other queries too....
Or If change in modelling is still an option, you can add one more Type 2 in the cube and update in the transformation with Constant = LEGALENTITIES. Use the Type 2 in the queries.

Receiving error 109 when trying to download trial CS 5.5 Design Premium, what is wrong?

Receiving error 109 when trying to download trial CS 5.5 Design Premium, what is wrong?

What location did you choose to download your install files too?

Dump when trying to display characteristic values in QUERY DESIGNER

Similar Messages

Maybe you are looking for