Display itab values coloum wise

hi all,
i want to display my itab values coloum wise instead row wise .
eg.
12
13
111
25
23
not like this but like below
12 13 111 25 23
thanks.

Hi,
After briniging your data into your internal table itab,
Loop at itab.
write: / itab-field1.   "by this slash before itab-field1
                            "each new entry will be displayed
                            "in next line and not row wise
Endloop.
Hope it helps
Regards
Mansi

Similar Messages

How to display itab values in text boxes?

hi friends,
i am filling ITAB with some fields, now i have to get one by one field and i have to display this field values in textboxes in BSP layout page.
for exaple my ITAB contains 2 fields,
ID, NAME.
In layout there are two Input boxes.
now i have to display ITAB fields ID and NAME fields in layout inputboxes.
plz Any helps with some example code.......
Regards,
Shankar.

hi shankar,
try this code Oninputprocessing event,
DATA: event type ref to cl_htmlb_event,
event = cl_htmlb_manager=>get_event( runtime->server->request ).
if event->id = 'btn'.
wa-id = '123'.
wa-name = 'abcd'.
append wa to itab.
if itab is not initial.
loop at itab into wa.
i_id = wa-id.
i_name = wa-name.
endloop.
endif.
endif.
Page attributes
i_id type string
i_name type string
Regards,
sri

How To display the value of outer loop with inner loop fields

Hi All
I have a issue that i have to display the values flexfield wise ,like i have 3 DFF values in xmlp layout ,each will have some list of records which will be displayed under the DFF values,so it means
DFF values will be in outer loop with its group
while related records of DFF will comes in inner loop with its group
my problem is that i have to display the DFF values also with respective inner records ,
Would somebody please suggest how can we achieve this ,please let me know if my question is not clear.
Thanks
Pratap

I think you will be having xml structure like this:
<G_HEADER>
<LIST_G_LINES>
<G_LINES>
</G_LINES>
</LIST_G_LINES>
</G_HEADER>
So in this case, if you want to refer G_HEADER details in G_LINES then, you should navigate 2 levels above.
It will be <?../../element_name?>

How to display values year wise in a request

Hi All,
My requirement is I have 3 years of data. I need to display that data year-wise in different tables at a time i.e., suppose if i have 2010,2011,2012 data then i need to display 2010 data in one table ,2011 data in next table and 2012 data in another table in same request. At a time i should get all three years of data but in different tables.
Here table in the sense data should be separated year_wise.
How can I achieve this?
Thanks in Advance,
Regards,
Sindhu

Hi,
It is good know you got your requirement.
Pivot table is on of the specialized view we are using to create the report. The options available in the view is same like Microsoft Excel Pivot table view.
Pivot table optioins:
Page: It is like prompt in the view itselft. If we are adding column in the page it will show all the values of that column for e.g if you are adding year column into that page tab it will show the values of the year, so we can select any particular year and can filter the report in the view itself.
Section: It will separate the report into different section by the column value which we are having in section tab.
Measures: It is the special place for adding number columns (e.g amount, employee count, quantity,revenue and etc, like that ) basically called measures in the fact table. The column dragged into the measures have special aggregation rules such as sum, min, max, avg,count and etc
excluded: if want to add any column in the saved request but donot want to display, you can drag that column into excluded tab.
Rows: These option will display the report by value of the column wise.
Columns: It will separate the measure value by the column what we are having in this tab. (for e.g if we are putting year in column tab the column 'Revenue' in the measure table will be separated by year wise.
Please mark the answer if it helpful.

How to display 7 values of single field in row wise.

hi,
how to display 7 values of single field in row wise.
thankx in advance.

hi ,
do it like this :
1 Place ur UI element in tranparent container with Layout as Row Data and Layout Data as Row Head Data
2 Ur first UI , which contains the first value as Row Head Data ,
3 Others as Row Data
u can do it with Matrix Data as well
if u want to give space , u can use HORIZONTAL GUTTER and set its width to medium / large / Xlarge
also there is a UI element "INVISIBLE ELEMENT" ,
1 u can use this UI element to provide space between ur other UI elements in the view
2 u can insert a text element as well , and in the Text property of the element press ALT + 0160.
u can give the space bw UIs as desired.
regards,
amit

How To Display Minus value in SAP SCript

Hello Guys.
I am working on a Script. My Problem is that For a fields BSAD-DMBTR.
I have to show this fields value as minus or plus as per condition with fields
bsad-shkzg. In my Internal table it's update as minus but when I am calling Write form with loop. the value is not display with minus sign.
How can I display value with minus sign in SAP script.
Regards
Swati,,

Hello Guys..
Thanks for Reply. But I am doing that thing already. My Internal table is updated with minus value. My Problem is not That.
let's suppose.
itab-name = 'xyz'.
itab-value = 100.
append itab.
itab-name = 'xyz1'.
itab-value = -1 * 100.
append itab.
loop at itab.
CALL FUNCTION 'WRITE_FORM'
 EXPORTING
 element = 'LINE'
 function = 'SET'
 type = 'BODY'
 window = 'MAIN'
 EXCEPTIONS
 element = 1
 function = 2
 type = 3
 unopened = 4
 unstarted = 5
 window = 6
 bad_pageformat_for_print = 7
 spool_error = 8
 codepage = 9
 OTHERS = 10.
 IF sy-subrc <> 0.
 MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
 WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
 ENDIF.
endloop.
Now when value is printed in SAP Script both value is display as plus .I want to display secound value as minus.
Please reply it's urgent.
Thanks
Swati....

How to get GL plan value plant wise

Hello,
Can you tell anybody where to updated GL plan value plant wise. In GP12N there is no planner profile for plant wise.
Thanks & reagrds,
Preethi kadkol

Hi,
Go toT.code FAGLL03 (GL Account Line Item Display G/L View).You Select the Custom Selections (Ctrl+F1) Button and there In GL Account Line Items select Plant and Click on Copy Selected Button at the bottom and provide the Plant Details and Saveyou have an option to change the layout and select the available fields in the layout. Plant and have it in the line items report, provided you maintain it as a special field using T. Code: OBVU/O7R3 (Line layaout variant for special fields).
Thanks,
Raviteja

Display variable values in Web report

Hi Bw Mates,,,
I am trying to display the variable values in Web Report.
I put one text Item in Template and checked the Variable Display and entered the variable name in List.
still I cannot see the variable values in the report.
Thanks for your help.
RSB

<object>
 <param name="OWNER" value="SAP_BW"/>
 <param name="CMD" value="GET_ITEM"/>
 <param name="NAME" value="TEXTELEMENTS_1"/>
 <param name="ITEM_CLASS" value="CL_RSR_WWW_ITEM_TEXT_ELEMENTS"/>
 <param name="DATA_PROVIDER" value="DATAPROVIDER_1"/>
 <param name="GENERATE_LINKS" value=""/>
 <param name="GENERATE_CAPTION" value="BORDER"/>
 <param name="SHOW_COMMON_ELEMENTS" value=""/>
 <param name="ELEMENT_TYPE_1" value="VARIABLE"/>
 <param name="ELEMENT_NAME_1" value="Z_CP_018"/>
 ITEM: TEXTELEMENTS_1
</object>
as the other poster mentioned the variable name has to be in upper case.
if only_values = 'X' you will just get the value other wise
you will get something like below.
variable description = variable value
Regards
Raja
Reward the helpful answers and close the thread once its answered.
sorry for the delay in answering, it was weekend for us

Total net order value Customer wise

Dear All,
I want to extract total Net sales order value customer wise for developing a report. I need to know SAP table details to get Total sales order values customer wise.
Standard report does not match my requirment.
I need to extract details from VBAP, customer wise. Please advise me to build a logic.
Thanks,
sajeewa.

You can get the Net value from VBAP-NETWR by line item & the sold to is on VBAK-KUNNR, then make a join on VBAK-VBELN & VBAP-VBELN, then group it by KUNNR to display totals by Customer.

Displaying the value of an variable on the stage

I have managed to display the values contained in string variables on stage, and I am happy with that, however when I wish to display the value of an int and convert it to a string as one is supposed to do the output to the stage just calls it [class int] and does not give its value. any suggestions?
My rogram contains a stage at frame 1 which displays a word. The user must input a word. Frame 30 then displays the word which was displayed and the word input by the user. That all works fine. But the value of the variable NumberRight, which has been assigned to that variable will only display as [class int] without showing its value. (even though I have converet it to a string using the .to string function you see below).
My code is as follows;
trace( "The number correct was" + NumberRight); //This works fine in the output window and shows the value of the variable as NumberRight [class int]1 (showing the value to be 1)
outputText.appendText("in/"+textAtIN); //this works fine displaying the word presented and word input by user as in/in
outputText.appendText( NumberRight.toString(     )); //here lies the problem as it just displays [class int] and nothing else.
Yes I have managed to overcome that problem it was some code on the first frame, please excuse, however, now, is there any way to remove the [class int] bit from the displays, I wish to have the results as a clear copy of the results so that they can be printed out, without [class int] all over the place?

Hi Ned thanks for that. Yes I had accidently created blank spaces in the String() argument. (wanted to check if there was a subsequent difference in display and forgot to return them to normal ...Sorted )
Your next suggestion has eliminated the [class int] but I get a value now of 0.
My code on the first frame for a correct response for example is;
function keyPressedIN(event:KeyboardEvent):void
          if (event.keyCode == 13)/*Normally,this will move straight on to the next frame-
          recording a correct response and all that that implies in terms of scores etc. But now I have re directed it to Frame 30 to check are the variables working properly*/
                    //insert code for correct responses vowels etc.
                    VowelI = VowelI+1;
                    NumberRight = NumberRight +1;
                    stage.focus = stage;
                    //There is no need to display the text box as this is a correct response.
                    pupilsResponseIN.visible = false;
                    mainText.visible = false;
                    gotoAndPlay(30);//at the moment this takes me to the display frame to check if all is ok
On the first frame when the user say hits the Return key my code assigns the value of +1 to the variable; eg
NumberRight=NumberRight+1;
and the value of +1 to the value of VowelI
VowelI=VowelI+1
At Frame 30 the code is as follows;
stop();
trace( "The number correct was"+ NumberRight);
outputText.appendText("in/"+textAtIN);
outputText.appendText( "\n");
outputText.appendText("Vowels Correct ="+(int(VowelI).toString()));
outputText.appendText( "\n");
outputText.appendText("TotalCorrect="+(int(NumberRight).toString()));
//outputText.appendText( VowelI.toString());
Now what I am getting is
in/in
Vowels Correct = O
Total Correct = O
Yet the trace (output box) records the Number correct as [class int]1
many years ago I wrote this same program in Authorware using similar code. I am trying to re write it in FlashCS5 using ActionScript 3 and It take days to solve small problems. I notice also that If for example the user of the program makes an error and I record the error as NumberRight =NumberRight -1 the program records it as Total Correct = NaN .
I gave up on this a few months back but I am trying again. I think there must be a better way to do this. Variables do not seem to add up or subtract for me at present. no doubt its me thats got it wrong.

Form displays NULL values

A page is using PL/SQL script to display data. There are 2 display variables. Instead of bringing initial set of data, it displays NULL values. It "fixes" itself after changing variable values from a drop down menu. Why is that and how to fix it?

If you plan on performing all of the work under the Click event, then you won't need to worry about assigning a Script scope to the variables, but if you are planning on using those variables outside of the Event, then David's answer is the way to go.
Another option is to use a hash table as it also works around the issue with variable scope in a UI Event.
#Define at beginning of script
$hashtable = @{}
$OKButton.Add_Click({$hashtable.SelectedTemplate=$Something})
Boe Prox
Blog |
Twitter
PoshWSUS |
PoshPAIG | PoshChat |
PoshEventUI
PowerShell Deep Dives Book

I am trying to build a basic TCL skeleton script that reads a remote SNMP OID and displays the value on the screen.

I am trying to build a basic TCL skeleton script that reads a remote SNMP OID and displays the value on the screen.
I don't want it to be an EEM Event, I just want to run it from the (tcl)# prompt.
So I guess I'm asking if you can use cli_exec and other commands in the "namespace import ::cisco::eem::*" in a normal non-EEM script - can I do that?
This is the error I get:
OTN.159(tcl)#source flash:TCL_SNMP_Remote_Read.tcl
invalid command name "::cisco::eem::event_register_none"             ^
% Invalid input detected at '^' marker.
What am I missing?
================= TCL_SNMP_Remote_Read.tcl ==============================
::cisco::eem::event_register_none
namespace import ::cisco::eem::*
namespace import ::cisco::lib::*
if [catch {cli_open} RESULT]
    { error $RESULT $errorInfo }
    else { array set cli1 $RESULT }
if [catch {cli_exec $cli1(fd) "snmp get v2c 192.168.1.100 public timeout 1 oid 1.3.6.1.2.1.1.1.0" } RESULT]
       { error $RESULT $errorInfo }
       else { set SnmpSysDesc $RESULT }
if [catch {cli_close $cli1(fd) $cli1(tty_id)} RESULT] {
            error $RESULT $errorInfo
puts $SnmpSysDesc
=========================================================================
In the sho-run config I have:
event manager directory user policy "flash:/"
event manager session cli username "cisco"
Any help to get me started would be greatly appreciated!
Tim

If you don't want an EEM policy, then don't use any of the EEM constructs. Instead, all you need is this:
set output [exec "snmp get v2c 192.168.1.100 public timeout 1 oid 1.3.6.1.2.1.1.1.0"]puts $output

Displaying default value for a field in ALV table

Hai all,
 I am having an ALV table in which I want to display Requisition number by default using a value which i generated randomly and it is stored in a variable.
While displaying ALV table my req number field should display that value by default when ever user is inserting a row( all the coloumns n my alv are editable.
Is it possible??
Kindly give some suggestions.
Thanks in Advance,
Nalla.B

Hai Kris,
 I took help from ur link and i declared a global attribute request_number.
and i created an event handler ON_ALV_INSERT and did the follwing coding for giving default value wen ever am inserting new row.
FIELD-SYMBOLS: <wa_row> LIKE LINE OF r_param->t_inserted_rows.
DATA bill_details TYPE REF TO zdom_bill_detail.
LOOP AT r_param->t_inserted_rows ASSIGNING <wa_row>.
 bill_details ?= <wa_row>-r_value.
 IF bill_details->REQ_NUMBER IS INITIAL.
DATA lo_nd_bill_detail TYPE REF TO if_wd_context_node.
DATA lo_el_bill_detail TYPE REF TO if_wd_context_element.
DATA ls_bill_detail TYPE wd_this->Element_bill_detail.
navigate from <CONTEXT> to <BILL_DETAIL> via lead selection
lo_nd_bill_detail = wd_context->get_child_node( name = wd_this->wdctx_bill_detail ).
lo_el_bill_detail = lo_nd_bill_detail->get_element( index = <wa_row>-index ).
 lo_el_bill_detail->set_attribute(
 EXPORTING
 name = 'REQ_NUMBER'
 value = wd_comp_controller->request_number
Wen am setting the value of wd_comp_controller->request_number to my context attribute am getting NULL object ref error.
lo_el_bill_detail->set_attribute(
 name = `REQ_NUMBER`
 value = wd_comp_controller->request_number ).
Pls give some suggestions,
Thanks in Advance,
Nalla.B

How to display the values stored in the database in the combobox on load?

I am develping one application where in
I wanted to display the values in the combobox which I am taking from the database and in the same form passing that value in same form after selecting it,My program is running fine for the first time but next time it is giving me NullPointerException.
So can anyone tell me please how I should develop the this application to avoid this exception?
Thank You
Praddy

Thanx a lot for showing interest in answering my query.I am pasting my code for ur reference.Please try to reply ASAP.
Thank You,
Praddy.
CODE:
======
<html>
<head>
 <script language="javascript">
 function submitthisform(thisForm)
 thisForm.submit();
 </script>
</head>
<body>
<form method=post name=samepgm>
Select City: <select name=city onChange='submitthisform(samepgm)'> 
<option value=''></option>
<option value='All'>All</option>
<%@ page language="java" import="java.sql.*" %>
<%
 String scity = request.getParameter("city");
 System.out.println(scity);
 Connection con = null;
 Class.forName("sun.jdbc.odbc.JdbcOdbcDriver");
 con = DriverManager.getConnection("jdbc:odbc:property","","");
 Statement st = con.createStatement();
 ResultSet rs1 = st.executeQuery("select distinct hcity from housefinance");
 while(rs1.next())
 //String ohname = rs1.getString("hname");
 String ocity = rs1.getString("hcity");
 //out.println(ohname +" ");
 out.println(ocity +" ");
%>
 <option value='<%=ocity%>'><%=ocity%></option> 
<% }
 rs1.close();
 if(scity.equals("All"))
 ResultSet rs2 = st.executeQuery("select * from housefinance");
 while(rs2.next())
 String ohname = rs2.getString("hname");
 String ohadd1 = rs2.getString("hadd1");
 //String ohadd2 = rs2.getString("hadd2");
 String ohcity = rs2.getString("hcity");
 String ohpcode = rs2.getString("hpcode");
 String ohtelno = rs2.getString("htelno");
 String ohfaxno = rs2.getString("hfaxno");
 String ohemail = rs2.getString("hemail");
 String ohmobile = rs2.getString("hmobile");
%>
<pre>
<tr>
<td>Company : <%=ohname%> </td>
<td>Address : <%=ohadd1%></td>
<td>City : <%=ohcity%> </td>
<td>Pin : <%=ohpcode%></td>
<td>Telphone : <%=ohtelno%></td>
<td>Fax No: : <%=ohfaxno%></td>
<td>Email : <%=ohemail%></td>
<td>Mobile No. : <%=ohmobile%></td>
</tr>
</pre>
<%
 else
ResultSet rs = st.executeQuery("select * from housefinance where hcity like '%"+scity+"%'");
 while(rs.next())
 String ohname = rs.getString("hname");
 String ohadd1 = rs.getString("hadd1");
 //String ohadd2 = rs.getString("hadd2");
 String ohcity = rs.getString("hcity");
 String ohpcode = rs.getString("hpcode");
 String ohtelno = rs.getString("htelno");
 String ohfaxno = rs.getString("hfaxno");
 String ohemail = rs.getString("hemail");
 String ohmobile = rs.getString("hmobile");
%>
<tr>
<td>Company : <%=ohname%> </td>
<td>Address : <%=ohadd1%></td>
<td>City : <%=ohcity%> </td>
<td>Pin : <%=ohpcode%></td>
<td>Telphone : <%=ohtelno%></td>
<td>Fax No: : <%=ohfaxno%></td>
<td>Email : <%=ohemail%></td>
<td>Mobile No. : <%=ohmobile%></td>
</tr>
<hr>
<% }
%>
</select>
</form>
</body>
</html>

How can I display the value of the Target Currency variable in my query

We have a query which has a key figure set to prompt for a Target Currency at runtime. Because the user did not want the currency displayed in each cell they used the NODIM function to remove it. They do however want to display the Target Currency in a cell within the report. Using Report Designer, I've tried to set up a Text Box to display this value, however, it is not in the list when looking at Constants, Filters or Variables or trying to display it in a Text box. Has anyone found a way to be able to do this?

Hi and thanks for the reply. I should have stated that because this was a validated query, we'd like to do this without modifying the query and thus having to go through another lengthy validation process. That's why we did not go the route of adding Unit to the query but we may have to. Another thing we can do is use a text variable in the headers that displays the currency. That works but, again, it's a query change whereas finding it in Report Designer will not require a query modification.

Display itab values coloum wise

Similar Messages

Maybe you are looking for