Display of certain nodes and subnodes in a hierarchy

Hello Friends,
        I have a hierarchy under which I need to restrict to just few nodes and subnodes. I don't want to see all the sub nodes under few nodes and at the same time I need to see just few nodes and not subnodes under them. When I say restrict and pull all the nodes and subnodes I need in the report it shows all the values under each of them.
         How can I avoid this?
Ex:
World
...-> America
........->      NJ
........->      NY
...-> Europe
........->      Paris
........->      Germany
...-> Asia
........>      India
..............->       Hyderabad.
In the above example I need to see values in my report row as:
America
Germany
Hyderabad
Any idea will be greatly appreciated.
Thanks,
Nikki

You can do more line in the report with the needed node as selection; in that case you can't explode the subnode.
If you can, pute the query in a workbook, adjust the result with the explosion needed and save the workbook; next time you will obtain the same result.
Hope it help you.
Regards.
Paolo

Similar Messages

Nodes and Subnodes in a Structure of SOLMAN

Hi Gurus,
Please let me know the procedure how to create Nodes and Subnodes in a Structure of SOLMAN.
Structure
    Node A
       Sub Node 1
       Subnode 2
   Node B
       Sub node 3
      Sub node 4..
etc..
Thanks and regards,
Varun

Hi Varun
I am not getting what your exact requirement
you meant to stay project structure in business blue print??
if yes [http://help.sap.com/saphelp_sm32/helpdata/en/55/93f63aad7e3014e10000000a11402f/frameset.htm|http://help.sap.com/saphelp_sm32/helpdata/en/55/93f63aad7e3014e10000000a11402f/frameset.htm]
check this blog for steps [/people/sapna.modi/blog/2007/06/28/sap-solution-manager-40-project-management--business-blueprint-phase-part-iii|/people/sapna.modi/blog/2007/06/28/sap-solution-manager-40-project-management--business-blueprint-phase-part-iii]
SAP tutor here [https://websmp103.sap-ag.de/sapidb/011000358700005456182006E.sim|https://websmp103.sap-ag.de/sapidb/011000358700005456182006E.sim]
Thanks,
Jansi

How to create a new node and its subnodes(zreports) in Transaction SRET

Hi Expets,
My requirement is to create a new node and subnodes(zreports) in the Transaction SRET.
Where as i am able to create a subnode(zreports) under the existing node but not able to create a New Node and
Subnodes(zreports) under it.
To create the subnodes(zreports) i used Transaction SERP and i was able to create the new node in SERP but not able to find it in SRET.
So please help me out.
Thanks,
Krishna

Dear Pushpa,
Transaction Code :SHD0 is working fine.
Please accept my sincere thanks for your sharing your Knowledge.
I am able to fulfill my
Regarding the enhancement, I have not tried.
Once I will complete, I will award the fulll marks to you.
With Best Regards,
Raghu Sharma

Get a certain node of a JTree

Hi to all!
I' m using JTree combined with DefaultMutableTreeNode and DefaultTreeModel.
My problem is that I have the path of a certain node and I just want to get a certain node of this path in order to edit (or better to update) its "userObject".
Maybe it's a silly question but I'm new to JTree and I feel a little lost with all these methods provided.
Thank you in advance.

For starters: excellent photography, and great lighting knowledge and skills. With great photography and lighting, you really don't need to do major alterations other than some minor improvements. i would say instead of looking for lightroom to make it better, instead improve the quality of your photos. lightroom is a tool, not a result to good photos.
with that said, reference these links:
http://thelightroomlab.com/2009/10/camera-raw-profiles-in-adobe-photoshop-lightroom/
http://layersmagazine.com/photographic-workflow-from-lightroom-to-photoshop.html
http://tv.adobe.com/watch/getting-started-with-adobe-photoshop-lightroom-4/lightroom-4-cre ate-stunning-images/
janelle

Reading XML file into Dynamic Node and Display its output as Table.

Hi All,
Following is the output of XML file:
   <Company>
     <Employee>
          <Name>John</Name>
          <Age>23</Age>
          <***>Male</***>
          <Location>Frankfurt</Location>
     </Employee>
     <Employee>
          <Name>Tina</Name>
          <Age>21</Age>
          <***>Female</***>
          <Location>Boston</Location>
     </Employee>
     <Department>
          <Name>Sales</Name>
          <HQ>Chicago</HQ>
          <Emplyoees>2300</Employees>
     </Department>
I'm able to read the output through DOM parser. But How do I convert this into dynamic node and display this in Web dynpro as Table?
Any pointers in this regard will be great help?
Thanks
Srikant

Hi Maksim,
I've used your example and its now helping as there is kind of agreement on that I'll be knowing the structure of Xml and I can fill the nodes.
But suppose if you have Xml has following structure :
<?xml version="1.0" encoding="utf-8"?><DATA>
<item><MAILERID TYPE="C" SIZE="000030">21</MAILERID><ORG_CODE TYPE="C" SIZE="000004">1232</ORG_CODE><EVENTID TYPE="C" SIZE="000015">CONTRACT</EVENTID><SUBSCR_VALUE TYPE="C" SIZE="000001">0</SUBSCR_VALUE></item>
<item><MAILERID TYPE="C" SIZE="000030">21</MAILERID><ORG_CODE TYPE="C" SIZE="000004">1232</ORG_CODE><EVENTID TYPE="C" SIZE="000015">CREDIT</EVENTID><SUBSCR_VALUE TYPE="C" SIZE="000001">0</SUBSCR_VALUE></item>
<item><MAILERID TYPE="C" SIZE="000030">21</MAILERID><ORG_CODE TYPE="C" SIZE="000004">1232</ORG_CODE><EVENTID TYPE="C" SIZE="000015">EMPRESS</EVENTID><SUBSCR_VALUE TYPE="C" SIZE="000001">0</SUBSCR_VALUE></item>
<item><MAILERID TYPE="C" SIZE="000030">21</MAILERID><ORG_CODE TYPE="C" SIZE="000004">1232</ORG_CODE><EVENTID TYPE="C" SIZE="000015">PAYMENT</EVENTID><SUBSCR_VALUE TYPE="C" SIZE="000001">0</SUBSCR_VALUE></item>
<item><MAILERID TYPE="C" SIZE="000030">21</MAILERID><ORG_CODE TYPE="C" SIZE="000004">1232</ORG_CODE><EVENTID TYPE="C" SIZE="000015">PRICE</EVENTID><SUBSCR_VALUE TYPE="C" SIZE="000001">0</SUBSCR_VALUE></item>
</DATA>
How we will do in this case?
Can we have something similar using DOM? Also what is the best method for displaying data being sent in form of XML. And generalize it for cases like this.
Thanks
Srikant

Is there a way to "mix" the nodes and leaves of the tree so if they are at the same level, they will display in a specified order.

Is there a way to "mix" the nodes and leaves of the tree so that even if they are at the same level (1,2,3...), they will display in a specified order (via sort sequence, alphabetical, etc.).
History:
We are using the Tree UI element to display/manage a material bom interface. We seem to be running into an issue with displaying the nodes/leaves of the tree.. regardless of the order that the context is built (which is currently the order of the exploded BOM from from CS_BOM_EXPL_MAT_V2), the bom is displayed with the nested boms at the top of each level and the single materials below them. For example. If TK1 contains Material1, Material2, Material3, Kit1(containing component1, comp2, comp3), Material4, Kit2(containing comp4, comp5, comp6), and Material5 (in this order), the tree will display with the A level node as TK1, the next node as Kit1 (with its subleaves of comp1,comp2,comp3), Kit2(with subleaves of comp4,comp5,comp6), THEN Material1, material2, material3, material4, material5. Our users are adamant about the items displaying in the correct order (which should be alphabetical based on the description for one report and by location for purposes of inventory for another). I've searched but not been able to locate a similar question. If I've missed it, please point me in the right direction. The users want the tree, not a "tree" table. This is our first attempt at the tree, so maybe we're missing something basic?
TK1
-Mat1
-Mat2
-Mat3
-Kit1
--Comp1
--Comp2
--Comp3
-Mat4
-Kit2
--Comp4
--comp5
--comp6
-Material5
displays as
TK1
-Kit1
--Comp1
--Comp2
--Comp3
-Kit2
--Comp4
--Comp5
--Comp6
-Mat1
-Mat2
-Mat3
-Mat4
-Mat5

co-workers said example picture is misleading.. we can make the order work if everything is a "folder" but not a mix of "folders" and "files" (if making a visual reference to the windows browser). i.e - a file is represented as an empty folder.
TK1
. Mat1
. Mat2
. mat3
> kit1
.. comp1
.. comp2
.. comp3
. mat4
> kit2
.. comp4
.. comp5
.. comp6
. mat5
displays at
TK1
> kit1
.. comp1
.. comp2
.. comp3
> kit2
.. comp4
.. comp5
.. comp6
. mat1
. mat2
. mat3
. mat4
. mat5
we can make it work if everything is a folder. This is our current workaround.
TK1
> mat1
> mat2
> mat3
v kit1 (when expanded)
.. comp1
.. comp2
.. comp3
> mat4
> kit2 (when not expanded)
> mat5

How To Display attributes of Child Node and Parent Node in same view

Suppose I have two view Carview and CarDetail View...IN Component context I have Parent Node Called Cars and It have its attribute as Price,Warranty,Year and also One Child Node Called as Brand Name Whose attribute are PrimaryBrand and SecondaryBrand..Now If I do Mapping of My First View i.e CarView with Child node of BrandName..and then I Have To Show Whole Detail of Car in CarDetailView.......How Can I Achieve it..

Hi Vinay,
You can map the child node and even the paren tnode to the same view if u want to display in the same window..
If not if ur requirment is to dispaly in the sme view but should not map the child and parent to the Same view then you can take another new view.. and insert 2 view containers and then add the Child view and parent view in that view containers and then Diaplay the newly created view.
Regards,
Raju Bonagiri

Safari not displaying certain icons and background music while viewing

I'm new to Mac OS.
I tried to view a website I used to visit but the 27" iMac wouldn't display certain icons and the background music when Windows 7 could.
I recalled when I was in the Windows 7, the internet Explore brought down a small yellow bar from the top page asking me whether I'd like to install the ActiveX so that the site can play back the backgound music, java script and so on.
I downloaded and tried the Google's Crome and the Firefox browsers but they were the same as the Safari.
Is there a remedy for it?
Your help is greatly appreciated.

HI,
If you could post a link to the site it would help.
From the Safari Menu Bar click Safari / Preferences and select the Security tab.
Where you see: Web content: Make sure the top 3 buttons are checked. Relaunch Safari and try that site.
If you would take a moment and click My Settings on the right side of this window and tell us which Mac OS X version your iMac is running and which version of Safari, that helps us trouble shoot for you. Thanks!
Carolyn

Nodes and links are not displaying in IE10 browser - mapviewer ps6

Hi,
Node and link are not visible on the IE10 browser where as in IE9 they are displaying properly.
In IE10 browser ,
when we set compatibility settings - Display All websites in compatibility view --> node are displaying properly.
when we deselect this node are not displaying properly
Is there any existing bug on mapviewer?
Thanks in Advance
Aruna

DRK Montreal,
try opening Terminal, and running the following command in the Terminal window:
nslookup www.pinatize.me
If you still have access to some of those other Mac computers, try running the same command on them also for comparison.
Please include in your reply the full output from that command.

Strange behaviour with ActiveX invoke node and Excel

I want to send a table of numbers from LV50.1f to Excel97. After getting a
reg to Excel8.Application I retrieve the Workbooks property, Invoke Item to
select a certain Workbook reference, retrieve the Worksheets collection
reference, Invoke Item and then get a reference to WORKBOOKS again.
Strangely, there is an example code from the NI web site that does exactly
the same, but in the last step a variant is returned in stead of a
reference, which is converted using Variant to G to a Worksheet reference.
when I copied that last invoke node to my VI I also had a variant returned,
so on one diagram I had to invoke nodes connected to the same sources, one
returning a ref, the other returning a variant!
Disco
nnecting the sources to my Invoke node and rewiring gave no change.
Also type casting the ref to workbooks to a worksheets ref, didn't work - I
get errors in the following property node that retrieves a Range - which
exists in Worksheet, but not in Workbooks.
Appearantly, LV gets the returned type mixed up sometimes, and there is no
way to fix it other then copying a invoke node from another diagram?
Finally I got it working though, but this behaviour puzzles me. Contrary to
the example from NI, I now managed to send a table (2d array of strings) in
one call to Excel (don;t need to loop over cells or columns).
PS
I used to do the same using DDE but ranges are different for each language
version of Excel (i.e. R1C1 for English and R1K1 for Dutch), so my VI's need
to know the language of Excel. Also with NT and Win98, getting a DDE
connection often hangs LV. But a big progress has been made - now I need
different VI's for each version of Excel!!!
Ferry Toth
Enraf BV, The Netherlan
ds

Hi Enric,
Can you try your queries again using the new release of DB XML? It contains some improvements in this area.
http://www.oracle.com/technology/software/products/berkeley-db/xml/index.html
John

I'm on a windows laptop using iTunes sharing through the family to connect with Apple TV. After choosing the folder of photos to be shared and displayed on the appletv and when I choose to show on screen, they are not shown in the order they are in the or

I'm on a windows laptop using iTunes sharing through the family to connect with Apple TV.
After choosing the folder of photos to be shared and displayed on the appletv and when I choose to show on screen, they are not shown in the order they are in the original folder.
How to pair show in a certain order, for example, sorted by name.
grateful
Julio Cesar

Not that I'm aware of. You just export JPEG copies to a folder that you can point iTunes to. For instance, I have created a folder in my Pictures folder called Apple TV. And within that folder I have other folders of pictures that I can choose from in iTunes to share with Apple TV. But there doesn't seem to be any way to share a Lightroom slideshow. If you have laid to create a video file that would probably work. Apple TV is a little clunky in my opinion. Some things are a little more difficult to do now than they were a while back. I probably haven't provided you with much help, but just keep experimenting and I think you will figure it out.

Fonts Do Not Display Correctly in Safari and Firefox

Certain fonts do not display smoothly in Safari and Firefox. They appear to have little pieces of the letters missing. I'm sure others have experienced this problem before but I could not find how to fix this. On the Apple Discussions the fonts look fine... on Google for example, they look messed up. I do not know specifically which font(s) are displayed weird but it happens frequently. This happens in Safari and Firefox on my MacPro and MacBookPro. Is there a setting to fix this?
Thanks,
-flash

Hello Flash, welcome to Apple discussions; )
Look for Helvetica Fractions and Times Phonetic Fonts, if you have them,
they can be the usual suspects.
Check the Text encoding in both Safari & FF, under the "View" menu.
In System preferences-> Personal (top section) in Appearance tab->
on the last portion of the panel Font smoothing Style: set that to Automatic
If those don't help, see this users tip excellent article Kurt Lang's ~ Font Management in Mac OS X
Look into this application to find any corrupt font[s]Font Finagler
Good luck, let us know how you fare.
Eme'~{)
edited by: Eme

How to Create Instances in the Transient Root Node and Sub Nodes from Root Node Query Method ?

Hi All,
I am Creating a BOPF BO with 3 Nodes,
Node 1) ROOT -- > contains a query,
using Root Node I have created Search UIBB Configuration in FBI.
In testing -- > when i enter Data in the Search Criteria Fields am able to get the details in to the query method
from Imporing parameter : 'IT_SELECTION_PARAMETERS'.
HERE I am fetching data from a standard table and trying to fill the data in the Node : 'MNR_SEARCH_RESULT'.
How to Append data to the Sub node 'MNR_SEARCH_RESULT' when there is no Node instance created in the ROOT Node ?
For This I have created an instance in the ROOT Node and Using that I tried to create Instance in the Sub Node 'MNR_SEARCH_RESULT'.
Below is my code which i have placed in the Query method ..
DATA : LR_DATA TYPE REF TO ZBO_S_ROOT1.
DATA : LR_SEARCH_RES TYPE REF TO ZBO_S_MNR_SEARCH_RESULT.
DATA : LO_CI_SERVICE_MANAGER TYPE REF TO /BOBF/IF_TRA_SERVICE_MANAGER,
        LO_TRANSACTION_MANAGER TYPE REF TO /BOBF/IF_TRA_TRANSACTION_MGR.
   LO_CI_SERVICE_MANAGER = /BOBF/CL_TRA_SERV_MGR_FACTORY=>GET_SERVICE_MANAGER( IV_BO_KEY = ZIF_BO_TEST_PO_C=>SC_BO_KEY ).
   LO_TRANSACTION_MANAGER = /BOBF/CL_TRA_TRANS_MGR_FACTORY=>GET_TRANSACTION_MANAGER( ).
CREATE DATA LR_DATA.
LR_DATA->KEY = LO_CI_SERVICE_MANAGER->GET_NEW_KEY( ).
LR_DATA->ROOT_KEY   = IS_CTX-ROOT_NODE_KEY.
LR_DATA->PIPO_MAT_ID = '100100'.
LR_DATA->PIPO_MAT_DESC = 'MATERIAL'.
LR_DATA->PIPO_SPRAS = 'E'.
LR_DATA->PIPO_MATL_TYPE = 'ZPMI'.
LR_DATA->PIPO_MATL_GROUP = 'ZKK'.
     DATA lt_mod      TYPE /bobf/t_frw_modification.
     DATA lo_change   TYPE REF TO /bobf/if_tra_change.
     DATA lo_message TYPE REF TO /bobf/if_frw_message.
     FIELD-SYMBOLS: <ls_mod> LIKE LINE OF lt_mod.
    APPEND INITIAL LINE TO lt_mod ASSIGNING <ls_mod> .
    <ls_mod>-node        =   ZIF_BO_TEST_PO_C=>sc_node-ROOT.
    <ls_mod>-change_mode = /bobf/if_frw_c=>sc_modify_create.
    <ls_mod>-key         = LR_DATA->KEY.
    <ls_mod>-data        = LR_DATA.
DATA : LT_CHG_FIELDS TYPE /BOBF/T_FRW_NAME.
DATA : LS_CHG_FIELDS LIKE LINE OF LT_CHG_FIELDS.
DATA : LV_KEY TYPE /BOBF/CONF_KEY.
CALL METHOD IO_MODIFY->CREATE
   EXPORTING
     IV_NODE            = ZIF_BO_TEST_PO_C=>sc_node-ROOT
     IV_KEY             = LR_DATA->KEY
     IS_DATA            = LR_DATA
     IV_ROOT_KEY        = IS_CTX-ROOT_NODE_KEY
   IMPORTING
     EV_KEY             = LV_KEY .
CREATE DATA LR_SEARCH_RES.
LR_SEARCH_RES->KEY           = LO_CI_SERVICE_MANAGER->GET_NEW_KEY( )..
LR_SEARCH_RES->PARENT_KEY    = LV_KEY.
LR_SEARCH_RES->ROOT_KEY    = LV_KEY.
LR_SEARCH_RES->MATNR    = '123'.
LR_SEARCH_RES->ERSDA    = SY-DATUM.
LR_SEARCH_RES->ERNAM    = SY-UNAME.
**LR_SEARCH_RES->LAEDA    = .
**LR_SEARCH_RES->AENAM    = .
**LR_SEARCH_RES->VPSTA    = .
*LR_SEARCH_RES->LVORM    = .
LR_SEARCH_RES->MTART    = 'ZPI'.
LR_SEARCH_RES->MBRSH    = 'ZTP' .
LR_SEARCH_RES->MATKL    = 'MAT'.
**LR_SEARCH_RES->BISMT    = ''
**LR_SEARCH_RES->MEINS    =
CALL METHOD io_modify->create
           EXPORTING
             iv_node            = ZIF_BO_TEST_PO_C=>sc_node-MNR_SEARCH_RESULT
             is_data            = LR_SEARCH_RES
             iv_assoc_key       = ZIF_BO_TEST_PO_C=>sc_association-root-MNR_SEARCH_RESULT
             iv_source_node_key = ZIF_BO_TEST_PO_C=>sc_node-root
             iv_source_key      = LV_KEY
             iv_root_key        = LV_KEY.
I am Unable to set data to the Node . I did not get any error message or Dump while executing . when i tried to retrive data I got the details from the node but am unable to view those details in the FBI UI and BOBT UI while testing .
Please provide your valuable Suggestions.
Thanks in Adv.
Thanks ,
Kranthi Kumar M.

Hi Kranthi,
For your requirement you need only two nodes. Root Node and Result node. Use the same structure for both.
To create Instance while search.
Create Query method with input type which has the required fields for selection criteria.
Fetch the data and create instance in the root node.
Pass the new instance key as exporting parameter form Query Method.
To Move data from ROOT to Result.
Create a action at root node.
Write a code to create new entries in Result node.
Then configure the Search UIBB and display result in List UIBB. Add button and assign the action MOVE_MAT_2_RESULT.
Create another List uibb to display data from Result node.
Connect the UIBBs using wire schema. SEARCH -> LIST(ROOT) ---> LIST(RESULT).
Give src node association for ROOT to RESULT Configuration.
Regards,
Sunil

How to assign ALV for parent node and child node that uses supply method.?

HI Dear friends,
I need to display header details ( VBAK ) and Item details ( VBAP ). I have created two node like HEADER_NODE inside this i have created ITEM_NODE for this item node i use supply function 'GET_ITEMS' any way it is working only when crete two separate table and binding but when i come to work with ALV i am totally confused .. i have created two 'View Controller UI Elements' when i try to map HEADER_NODE it mapped properly but for ITEM_NODE it shows mapping already defined. return status message as 'Action Cancelled' . In result both ViewContainer shows only HEADER_NODE data only.
How to achive ALV for Parent, child node that uses supply function ? ?
Thank you

Delete Mapping is not enabled, that means there is no mapping done yet.
I just tried what you are saying and the application works and i am able to map the header table and item table and also again i could map the tables any number of times.. i didn't get any such message, sorry i couldn't recreate the scenario. might be there is something wrong in the context.
i just did it like this.
Please also move this to Web DynPro Discussion, Hope that would be helpful.
Message was edited by: Syed Ghulam Ali

Setting Dialog, Tree Node and Menu Font in JDeveloper 11.1.1.4/11.1.1.5

Hi,
I'm near sighted and thus dependent on being able to choose larger fonts. For the code editor, this poses no problem. For the widgets in the views surrounding the editor (containing tree nodes) and dialogs (with the Preferences dialog being one example), the font is very small at high screen resolutions (I don't want to resort to a lower resolution since I would like the fonts to appear as detailed as possible).
Is there any way to override the menu, tree node, and dialog font via command line switches and/or property/config files during JDeveloper startup in a platform independent way?
If it can't be done platform independently, what are the necessary steps on Linux (probably for the GTK lib) and Windows?
Thanks in advance!
Kind regards,
Holger

I previously developed under full screen option and my PC resolution was 1600x1200. But when the application was ran on other screens it was displaying with some page contents being cut out. It was due to other machines running on lower resoultion. I will need now redesign the pages to run on user defined lower resolution of 1280x1024. How do I setup Jdeveloper design tab to show for 1280x1024.
Thanks
Edited by: user5108636 on Feb 14, 2011 5:23 PM

Display of certain nodes and subnodes in a hierarchy

Similar Messages

Maybe you are looking for