Display PCR in production

Hi Gurus,
Can you suggest how to display a PCR in production if you dont have access to Pe02 production.
I tried using Report "RPDASC00" but through this I can dsplay A pCR which is direct under schema.
But i have a schema like A which is calling PCR B and PCR B is calling PCR C and my requirement is to display PCR C.
I want to check content of PCR C in production without PE02.
Please suggest
Regards
Dheeraj

Dear All,
we dont have access to Se16n..in production..
Through se16n we can also edit tables rite?
I have cm  across1 standrd report for displaying pcr :RPDASC00
Can any body assist how to find out which tcode is assigned to this report..i excuted through se38 in dev..bt we dont hv access to se38 in prod
Regards
Dheeraj

Similar Messages

  • Image time display discrepancies between product

    The following is an example of a problem I've observed in many places in my photo collection.
    I have two files taken 8 seconds apart in April 2009 with a Nikon D70 shooting .jpg format.  The files were subsequently imported from the camera memory card using a card reader and Photoshop Elements.  PSE was also used to add tags to these files.
    Since then I've acquired Photoshop CS 5 Extended.  The other day I was looking at these files in both PSE and Bridge.  PSE shows the time of these two files to be the same (as it should), however, it adds an hour to the actual time the image was taken to adjust for the difference between the time set in the camera (it was Pacific Time) and the time zone where my computer is now located (Mountain Time).  When I look at the time on the images in Bridge, one of them shows the correct time in Pacific Daylight Time, but the other is showing the corresponding UTC time value, 7 hours later than the local time.  Looking at the file list in Window Explorer shows the "Date" and "Date taken" values to be the same as that shown by Bridge.
    There were two other images taken shortly before the first one mentioned above and they show the correct local time.  The two files that followed the UTC timed file also show a UTC time value.  Then following that the next file shows local time and then there are a number of files showing UTC for time.
    If I look at the two files with Windows Notepad so that I can see some of the text strings in the exif data portion of the file, the first file has a couple different places where time is shown in the format "...hh:mm:ss-07:00" and the other in the format "...hh:mm:ssZ".  The time value is preceded by the date in yyyy:mm:dd format. It would appear that Bridge is reading these values and displaying them, while PSE is getting some other time value from the file. Here is the actual string from the file that displays in UTC:
         exif:DateTimeOriginal="2009-04-05T17:08:10Z"   exif:DateTimeDigitized="2009-04-05T17:08:10Z"
    and for the file that displays time in local time the string is:
         exif:DateTimeOriginal="2009-04-05T10:08:02-07:00"   exif:DateTimeDigitized="2009-04-05T10:08:02-07:00"
    I've observed this same discrepany with files taken more recently with a Nikon D700 and images in NEF format.  I think I can reasonably eliminate the possibility that this is a camera caused discrepancy.  I suspect that some program is actually reading the local time and offset, then writing that back to the file as a UTC time value.  The behaviors of PSE and Bridge seem to point to the fact that the two programs are extracting time from different fields / strings in the file.  At this point the occurrance of the problem seems random, at least I've not been able to discern a pattern and reproduce it at will.
    Although this is not a catastrophic problem, it does cause confusion.  I've also looked at these files in Lightroom, which on initial inspection appears to get the same time values as Bridge.  The down side of this is that files in Lightroom are sorted into time order, which may not be the order they were taken.  Although I recognize that these products may not have been design for complete compatibility, it sure would be nice if they all treated time in the same way.

    I believe I now have more information about how PSE works and therefore need to slightly correct my original post.  It looks like PSE takes what ever time it finds for the photo's "time taken," converts it to UTC, then converts it to the local time on which PSE is running.  That will explain why two images taken seconds apart, with on having time coded as local time plus UTC offset and the other having an absolute UTC time, display the time taken in local time.  On the other hand, Bridge (and Lightroom) just displays what ever time it finds in the file.

  • Need Authority Check so that Do not display Customer in Production Order

    Hi,
    I our business we use MTO in PP.Thats why Customer code with Customer Name is shown in Production Order General Tab.Now I want to restrict this view in production order so that no user can able to see the Customer Code and Name in production Order.
    Please help me.
    Regards
    Kamal

    HI,
    Follow these steps:
    1. Run T-Code SHD0
    2. Enter "CO08" in the Transaction Code row.
    3. Select the  "Standard Variants" Tab
    4. Enter ZCO08 as name. Click "create" button on the toolbar (top).
    5. The CO08 screen will appear. Enter some data (test data) as sales order, line item no, material, plant and order type and press enter.
    6. A pop up window will come, press enter.
    7. The production order header screen will open.
    8. Enter the required fields like quanityt, date and press enter. again a pop up will come, press enter.
    9. Again a pop up screen will come, scroll down on this you will find sales order and other fields.
    10. Now for Sales order, AFPOD-KDPOS, AFPOD-KDEIN, G.DelDate, 1.del.dat, Ordering prty, AFPOD-NAME1 and AFPOD-ORT01, tick the "Invisible" check box. And press enter.
    11.  Now cancel the production order by clicking cross from the top. This will exit the process without saving the production order. The change transaction variant screen will appear. Check for the check boxes, they will be ticked. Enter the short text for variant in the header data.
    12. Click "Save". It will ask for package, Click on "local object", save with "&TMP". You will have to save for all the screen variants here. Just keep pressing save.
    13. Now press back button. The SHD0 screen will come. In the Standard Variants tab, click on the activate button (beside the Name field).
    14. Now run the T Code CO08, and make production order against sales order. In the production order header, the sales order related information will not be displayed.
    Hope it is useful.
    Try and revert.
    Regards,
    Rohit.

  • Button Image not display proper in production.

    Hi,
    I have issue regarding button image, in local jdev its works fine but when i deploy page to production button image is not shown properly. Its display like html button. can any body tell me the solution?
    Thanks

    Also go through
    Look and Feel for "Button"Thanks
    --Anil                                                                                                                                                                                                                       

  • UI Attributes - RFC error when displaying PCR with Adobe forms

    Hello All,
    I am receiving an UI Attributes/RFC error when I display a PCR that was created wth Life Cycle Designer. I copied it from a delivered SAP form. I am using the QISR1 Badi to process the form. I have three other forms that are working correctly.
    If anyone can provide some direction into resolving this, it would be greatly appreciated.
    Thanks,
    Mike

    Hello All,
    I was able to resolve this issue by setting a UI Attributes variable.
    Thanks

  • Display PCR in MSS

    Hi,
    Manager can create PCR in MSS. Once he fills details it goes to HR administrator. When HR is processing he will get action box like maintain pa30, pa40, view form,display form. pa30,pa40 is working fine, but when HR click the display or change form, the form is not opening. wt may be the reason.
    pls help. high priority. points will be rewarded.
    king

    Hi Suresh,
    my URL is http://idp.ggn.com:50100/irj . even after maintaining its throwing error.
    pls help
    king

  • Profit Center Display Unnormal  IN  Production Order

    If I choose Special as type for  Production Order, Profit Center wont display normally, it'll display nothing or something from the previous/next  Production Order .
    And I'm using the DI to create Production Order , but there's only one field availble that is  ProductionOrders.DistributionRule .In this way , full  DistributionRule  (2 dimenssions) cant be displayed.
    thanks.

    yes, Im gonna use ui to cover that place and make the value as same as the field OcrCode
    Is Profit Center has something to do with the accounts? there should be , I'm not aware of it .

  • Display iobject and product in crm

    hi what is the transavtion to display an iobject and also a product in crm

    Hi,
    You can use the transaction IB53 for the display Ibase. If you do not have the IBase in CRM but just IObject then you can use the transaction COMMPR01 to display the IOBject as well as product in CRM.
    But to display the IObject with transaction COMMPR01 you need to add the parameter COMMPR01_IND_OBJ = X to your user profile.
    <b>Reward points if it helps!!</b>
    Thanks,
    Vikash.

  • PIR & CIR is not getting displayed in APO product master

    Hi guys,
        I have created PIR and CIR in R/3 ,but it is not getting displayed in APO . Please guide me to resolving this what are the settings i have to check in the SAP system.
    Thanks
    S.Murali

    I am Basis consultant.
    Regarding RFC, logical system assinement, are the things are configured.
    But still it is not active the integration between R/3 & APO server.
    (Behalf of Murali )

  • Characteristic values not displayed in APO Product

    Hi friends,
    I CIFed Materials with characteristics and class as 300 (variant) to APO-SNP where it gets converted to class 400 (CDP). The material gets CIFed but when I go to the Classification tab of Product master (/SAPAPO/MAT1), and hit Further Classes button, the Characteristics value descriptions appear but with no values assigned to it.
    Have any one experienced this before or anyone could help me on this. Thanks in advance for your help.
    Sam

    Hello Friends,
    My problem is similar to Sam's. The difference is that when I hit Further Classes button, it appears a messagem saying there are no assignements for class type 300, only for class type 400. Any idea of what is the cause?
    Thank you!
    Regards,
    Elaine
    Message was edited by:
            Elaine Cristina Schneider de Carval

  • SSRS report using mdx query to display sales of product by yearwise

    There is a requirement to create SSRS report as 
    Product                         +Calender2011               -Calender 2012            +Calender 2013      
             + Calender 2014
    Jan12 Feb12 Mar12...
    Product 1 50    100       200 ..
    Product 2 150    900       200 ..
    Product 3 250    180       900 ..
    Product 4 450    100       200 ..
    Product 5 50    100       200 ..
    Product 6 50    100       200 ..
    When I click on Calender2011 corresponding all months of 2011 has to appear and likewise for Calender2012, CalenderN 
    The MDX query I have like as follows-
    Select    Non Empty{
    [Measures].[Product1], 
     [Measures].[Product2], 
     [Measures].[Product3], 
     [Measures].[Product4],
      [Measures].[Product5], 
      [Measures].[Product6], 
      [Measures].[Product7], 
      [Measures].[Product8], 
      [Measures].[Product9], 
      [Measures].[Product10], 
      [Measures].[Product11], 
       } ON Rows ,
       Non Empty  { ([Dim Calendar H].[Year Name].[Year Name] ) *([Dim Calendar H].[Month name].[Month name])
     ON COLUMNS
      FROM ( SELECT ( { [Dim Calendar H].[Year Name].&[Calendar 2014], 
     [Dim Calendar H].[Year Name].&[Calendar 2013], 
     [Dim Calendar H].[Year Name].&[Calendar 2012], 
     [Dim Calendar H].[Year Name].&[Calendar 2011] } ) 
     ON COLUMNS 
     FROM [Cube]) 
    Please help me. 
    Advance thanks...

    Hi Afans,
    According to your description, you want to create a drill-down report using SQL Server Analysis Services database, right?
    In this case, you need add the Year and Month fields to the column group, and set the Month column can be toogled by Year column group. I have teste it on my local environment, here is the sample query for your reference.
    select [Measures].[Internet Sales Amount] on 0,
    [Product].[Category].members*[Date].[Calendar].[Calendar Year].members*[Date].[Month of Year].members on 1
    from
    [Adventure Works]
    Reference
    http://popbi.wordpress.com/2012/03/02/ssrs-how-to-add-a-column-group-to-an-existing-table/
    http://msdn.microsoft.com/en-IN/library/dd207042.aspx
    Regards,
    Charlie Liao
    TechNet Community Support

  • How to Display the configurable product in E-Commerce application

    Hi Gurus
    Need the Help
    How to dispay the configurable products in E-commerce application.How can u differenciate the Normal products and Variant configured products,If any one having any idea please respond fast.
    Currently we are using 2007 version of CRM.
    Regards
    Satish

    Hi
    We need to create a configurable material in R/3 the same has to replicated to CRM using middleware.
    In short we require to do the following.
    The SAP tasks for setting up a new KMAT are outlined:
    Routings
    Smart Table
    MVC changes
    MVX changes
    ISA
    Create KMAT
    Create Class
    Create Characteristics
    Create Configuration Profile & add procedures
    Create Super BOM
    Create Pricing rules
    Regards,
    Sumit

  • CIF - PurchOrder to SCM - how will PO be displayed in the Product View

    Hello,
    I am just wondering how a purchase order from R/3 (material is purchased from an external vendor) for a specific plant is shown in APOs Product View:
    1. New Purchase Order  - PchOrd
    2. Purchase Order in R/3 with an order confirmation (AB category) - POMemo????
    3. Purchase Oder in R/3 with a shipment notification (LA category) - POMemo
    Why is the category within APO already a POMemo even so we only have a order confirmation?
    Thanks.
    Kind regards,
    Andrea

    Hi Sandeep,
    Please use BADI :/SAPAPO/PPT_SELECT 
    Restriction of the selection in the product planning tab.
    /SAPAPO/PPT_SELRES:Adjustment of Selection in the Product Planning Table
    Also for scheduling planning board you can use  customer exit APOCDPS8 to  select object according to customer-specific criteria.
    Manish

  • CK 15 W Contacts and Display issues (Lousy Product...

    Why does the CK 15w only read the Last Name of contacts, yet the N73 searches on both
    Even thought the contacts are stored as Firstname lastname is "File As" field.
    And..
    Why does it not display SSI, Battwery and Operator name when it apparently should (really useful out here in Australia - mind you though the N73 display the Location data from more than 3 weeks ago.... when it displays irt, whcih is very very rare. and when it does, it disappears in a microsecond when bluetooth is activated
    And....
    Why does the CK 15W - Professionally installed, (and checked by myself a certified avionics engineer who knows ground, 12v and ignition sense from day 1 of electronics 101) contanstly lose memory overnight, but can retain memory for half an hour when unplugged for long enough when trying to clear the memory by power off.
    And ....... the car kits frequenjtly re-sets when on a call
    And ...........the phone frequently locks up when doing almost anything
    And ............... the bookmarks don't sync to anywhere that can be seen on the PC or the phone, apart from the nokia ones
    Whatever happened to QA process for software?
    I thyink that stopped back in the days of the 7110 slide phone. every phone since then has needed updates.

    gone
    Message Edited by AGoodSolution on 08-11-2009 12:45 PM
    Don't just sit there, take a second and use the Kudo's button to compliment the people who help you.

  • Random display of database products without refreshing

    Hi all,
    How can I make a list of products randomly change on the
    page, without refreshing and using flash?
    Or is it possible with flash?
    I can create the query but need to know how to make it
    randomly change on the page without refreshing the page.

    Why do you not want a refresh?
    "Julian Roberts" <[email protected]> wrote in message
    news:f7svkq$2mc$[email protected]..
    > You could look at using Ajax, not an easy prospect
    though.
    >
    > --
    > Jules
    >
    http://www.charon.co.uk/charoncart
    > Charon Cart 3
    > Shopping Cart Extension for Dreamweaver MX/MX 2004
    >
    >
    > "The_FedEx_Guy" <[email protected]>
    wrote in message
    > news:f7srj1$rmr$[email protected]..
    >> Hi all,
    >> How can I make a list of products randomly change on
    the page, without
    >> refreshing and using flash?
    >>
    >> Or is it possible with flash?
    >>
    >> I can create the query but need to know how to make
    it randomly change on
    >> the
    >> page without refreshing the page.
    >>
    >
    >

Maybe you are looking for