Display problm in alv

hi
below is my code...
if i enter one plant in the selection screen then my prgrm works fine
now my prblm is in selection screen if i enetr more than 1 plant then i should get uot put as below
Process Order details for 1120,1130,1410
how to do this?
DATA: it_header TYPE slis_t_listheader,
      wa_header TYPE slis_listheader,
      werks1 TYPE eine-werks,
      werks2 TYPE eine-werks,
      t_text TYPE string.
    move i_werks-low to werks1.
LOOP AT i_werks.
CONCATENATE text-to1 ':' werks1 INTO t_text SEPARATED BY space.
wa_header-typ = 'H'.
wa_header-info = t_text.
APPEND wa_header to it_header.
CLEAR wa_header.
ENDLOOP.

Hi,
Do similar to this
DATA : G_WERKS TYPE WERKS_D,
       IT_WERKS TYPE TABLE OF WERKS_D,
       WA_WERKS TYPE WERKS_D,
       TEXT     TYPE CHAR1024.
SELECT-OPTIONS : I_werks for g_werks.
SELECT WERKS
FROM T001W
INTO TABLE IT_WERKS
WHERE WERKS IN I_werks. " Table IT_WERKS will contain plants based on user Input
LOOP AT IT_WERKS INTO WA_WERKS.
CONCATENATE TEXT WA_WERKS INTO TEXT SEPARATED BY SPACE.
ENDLOOP.
WRITE TEXT.
Use the variable TEXT in the header
Regards
Edited by: Rajvansh Ravi on Jun 16, 2009 8:41 AM

Similar Messages

Total is not getting displayed in the ALV output.

Hi,
Total is not getting displayed in the ALV output.
I m using :REUSE_ALV_BLOCK_LIST_APPEND & REUSE_ALV_BLOCK_LIST_DISPLAY
Are there any issues with it as the same settings are working fine with REUSE_ALV_LIST_DISPLAY
source code:
DATA: layout TYPE slis_layout_alv,
      IT_eventS TYPE slis_t_event,
      fcat   TYPE slis_t_fieldcat_alv WITH HEADER LINE,
      rec_fcat TYPE slis_t_fieldcat_alv WITH HEADER LINE.
TYPES: BEGIN OF ty_tab,
      belnr TYPE dberchz-belnr,
      belzart TYPE dberchz-belzart,
      net TYPE dberchz-nettobtr,
      END OF ty_tab.
DATA: lt_tab TYPE STANDARD TABLE OF ty_tab.
SELECT belnr belzart nettobtr
FROM dberchz
INTO TABLE lt_tab[]
WHERE belnr eq '000000000001'.
if sy-subrc ne 0.
ENDIF.
* defining layout
layout-colwidth_optimize = 'X'.
layout-def_status = 'X'.
*defning event
*event
*defining field catalog
fcat-col_pos = 1.
fcat-fieldname = 'BELNR'.
fcat-tabname = 'LT_TAB'.
APPEND fcat.
fcat-col_pos = 2.
fcat-fieldname = 'BELZART'.
fcat-tabname = 'LT_TAB'.
APPEND fcat.
fcat-col_pos = 3.
fcat-fieldname = 'NET'.
fcat-tabname = 'LT_TAB'.
fcat-do_sum = 'X'.
APPEND fcat.
*calling alv
CALL FUNCTION 'REUSE_ALV_BLOCK_LIST_INIT'
EXPORTING
    i_callback_program             = 'YZ_PLR'
*   I_CALLBACK_PF_STATUS_SET       = ' '
*   I_CALLBACK_USER_COMMAND        = ' '
*   IT_EXCLUDING                   =
CALL FUNCTION 'REUSE_ALV_BLOCK_LIST_APPEND'
EXPORTING
    is_layout                        = layout
    it_fieldcat                      = fcat[]
    i_tabname                        = 'LT_TAB'
    it_events                        = IT_EVENTS[]
*   IT_SORT                          =
*   I_TEXT                           = ' '
tables
    t_outtab                         = lt_tab[]
* EXCEPTIONS
*   PROGRAM_ERROR                    = 1
*   MAXIMUM_OF_APPENDS_REACHED       = 2
*   OTHERS                           = 3
IF sy-subrc <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
*         WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
CALL FUNCTION 'REUSE_ALV_BLOCK_LIST_DISPLAY'
Thanks,
Gaurav

Hi
No I don't think, this is my code (based on your code) and it works fine:
TYPE-POOLS SLIS.
DATA: BEGIN OF LT_TAB OCCURS 0,
       BELNR LIKE BSEG-BELNR,
       GJAHR LIKE BSEG-GJAHR,
       WRBTR LIKE BSEG-WRBTR,
       WAERS LIKE BKPF-WAERS,
      END OF LT_TAB.
DATA: LAYOUT     TYPE SLIS_LAYOUT_ALV,
      IT_EVENTS TYPE SLIS_T_EVENT,
      FCAT       TYPE SLIS_T_FIELDCAT_ALV WITH HEADER LINE,
      REC_FCAT   TYPE SLIS_T_FIELDCAT_ALV WITH HEADER LINE.
START-OF-SELECTION.
FCAT-COL_POS       = 1.
FCAT-FIELDNAME     = 'BELNR'.
FCAT-TABNAME       = 'LT_TAB'.
FCAT-REF_FIELDNAME = 'BELNR'.
FCAT-REF_TABNAME   = 'BSEG'.
APPEND FCAT.
FCAT-COL_POS       = 2.
FCAT-FIELDNAME     = 'GJAHR'.
FCAT-TABNAME       = 'LT_TAB'.
FCAT-REF_FIELDNAME = 'GJAHR'.
FCAT-REF_TABNAME   = 'BSEG'.
APPEND FCAT.
FCAT-COL_POS       = 3.
FCAT-FIELDNAME     = 'WRBTR'.
FCAT-TABNAME       = 'LT_TAB'.
FCAT-CFIELDNAME    = 'WAERS'.
FCAT-REF_FIELDNAME = 'WRBTR'.
FCAT-REF_TABNAME   = 'BSEG'.
FCAT-DO_SUM        = 'X'.
APPEND FCAT.
FCAT-COL_POS       = 4.
FCAT-FIELDNAME     = 'WAERS'.
FCAT-TABNAME       = 'LT_TAB'.
FCAT-REF_FIELDNAME = 'WAERS'.
FCAT-REF_TABNAME   = 'BKPF'.
FCAT-DO_SUM        = SPACE.
APPEND FCAT.
SELECT * FROM BSEG INTO CORRESPONDING FIELDS OF TABLE LT_TAB
    WHERE BUKRS = 'MAAB'
      AND BELNR = '0000000001'.
LT_TAB-WAERS = 'EUR'.
MODIFY LT_TAB FROM LT_TAB TRANSPORTING WAERS WHERE WAERS = SPACE.
*CALLING ALV
CALL FUNCTION 'REUSE_ALV_BLOCK_LIST_INIT'
    EXPORTING
      I_CALLBACK_PROGRAM = 'ZPROVAMAX5'.
CALL FUNCTION 'REUSE_ALV_BLOCK_LIST_APPEND'
    EXPORTING
      IS_LAYOUT   = LAYOUT
      IT_FIELDCAT = FCAT[]
      I_TABNAME   = 'LT_TAB'
      IT_EVENTS   = IT_EVENTS[]
    TABLES
      T_OUTTAB    = LT_TAB[].
CALL FUNCTION 'REUSE_ALV_BLOCK_LIST_DISPLAY'.
I've also inserted a currency field
Max

How to display total in ALV Header

How to display total in ALV Header?

Hi Venkey,
As far as your issue is concerned I would like to quote my perception.
Create a header internal table with title and number of records.
At the later part of your program you should have found the total number of records ,now assign it to the header internal table and print it.
For further clarification you can go check this link:
http://wiki.sdn.sap.com/wiki/display/ABAP/AddHeadertoALVreport
Thanks
P.Srikanth

Cell(Row) Selection not display in OOPS ALV

Hi all,
I am not able to get the cell(row) selection in the oops ALV when i called it second time.
I am displaying some information using oops alv in 100 screen. After user action on 100 screen i am calling 200 screen with different information which is also display in oops alv. When i displaying information in second time the cell(row) selection is not getting displayed.
For both ALV the fieldcatelog is different.
Initially i tried using same container but i face same problem, so i am trying to call second alv in new screen.
But problem remain same.
Can anyone help me to solve this problem ?
Regards
Nilesh

hi,
can u send ur report so dat i can look furhter to it.and help u out

Displaying logo in alv report

hi,
what are the minimum requirements to display logo in alv report at the top of the page.
i searched forums but did n't get the required answer.

Hi
This code is to display logo in the report through alv grid
*& Report ZALVDEMO *
REPORT ZALVDEMO.
TABLES : J_1IEXCHDR, " header table
J_1IEXCDTL, " item table
J_1IPART2, " Excise Part II details
LFA1, " vendor master table
J_1IMOVEND, " vendor excise details table
MSEG, " Document Segment: Material
MKPF, " Header: Material Document
DD07T, " domain text table
T001W. " Plant and Branch Details
DATA : BEGIN OF IT_CHDR OCCURS 100,
DOCNO LIKE J_1IEXCHDR-DOCNO,
DOCYR LIKE J_1IEXCHDR-DOCYR,
EXNUM LIKE J_1IEXCHDR-EXNUM,
EXDAT LIKE J_1IEXCHDR-EXDAT,
WERKS LIKE J_1IEXCHDR-WERKS,
EXBED LIKE J_1IEXCHDR-EXBED,
EXCCD LIKE J_1IEXCHDR-EXCCD,
ECS LIKE J_1IEXCHDR-ECS,
END OF IT_CHDR.
DATA : BEGIN OF IT_CDTL OCCURS 100,
DOCYR LIKE J_1IEXCDTL-DOCYR,
DOCNO LIKE J_1IEXCDTL-DOCNO,
EXNUM LIKE J_1IEXCDTL-EXNUM,
EXDAT LIKE J_1IEXCDTL-EXDAT,
LIFNR LIKE J_1IEXCDTL-LIFNR,
MATNR LIKE J_1IEXCDTL-MATNR,
MAKTX LIKE J_1IEXCDTL-MAKTX,
CHAPID LIKE J_1IEXCDTL-CHAPID,
EXBAS LIKE J_1IEXCDTL-EXBAS,
EXBED LIKE J_1IEXCDTL-EXBED,
ECS LIKE J_1IEXCDTL-ECS,
MENGE LIKE J_1IEXCDTL-MENGE,
MEINS LIKE J_1IEXCDTL-MEINS,
RDOC2 LIKE J_1IEXCDTL-RDOC2,
END OF IT_CDTL.
DATA TEXT(10).
DATA : BEGIN OF IT_OUT OCCURS 0,
SERIALNO LIKE J_1IPART2-SERIALNO,
TEXT1 LIKE TEXT,
EXNUM LIKE J_1IEXCDTL-EXNUM,
EXDAT LIKE J_1IEXCDTL-EXDAT,
NAME LIKE LFA1-NAME1,
DDTEXT LIKE DD07T-DDTEXT,
EXCCD LIKE J_1IEXCHDR-EXCCD,
BUDAT LIKE MKPF-BUDAT,
EXBAS LIKE IT_CDTL-EXBAS,
EXBED LIKE IT_CDTL-EXBED,
ECS LIKE IT_CDTL-ECS,
MATNR LIKE IT_CDTL-MATNR,
MAKTX LIKE IT_CDTL-MAKTX,
CHAPID LIKE IT_CDTL-CHAPID,
MENGE LIKE IT_CDTL-MENGE,
MEINS LIKE IT_CDTL-MEINS,
DEL_IND(1),
END OF IT_OUT.
DATA IT_PART2 LIKE J_1IPART2 OCCURS 0 WITH HEADER LINE.
DATA S_NO(4) .
DATA DB_CNT LIKE SY-TABIX.
DATA EBELN_T LIKE MSEG-EBELN .
TYPE-POOLS : SLIS.
DATA : AFIELD TYPE SLIS_FIELDCAT_ALV.
DATA : LIST_HEADER TYPE SLIS_T_LISTHEADER,
FIELDCAT TYPE SLIS_T_FIELDCAT_ALV,
LS_FTCAT TYPE LVC_S_FCAT,
SORTCAT TYPE SLIS_T_SORTINFO_ALV,
SORTCAT_LN LIKE LINE OF SORTCAT,
G_REPID LIKE SY-REPID,
G_BACK_GROUND(70), "like bapibds01-objkey,
GS_VARIANT LIKE DISVARIANT,
G_SAVE ,
GT_EVENTS TYPE SLIS_T_EVENT,
ALV_EVENT TYPE SLIS_ALV_EVENT,
EVENTCAT TYPE SLIS_T_EVENT,
EVENTCAT_LN LIKE LINE OF EVENTCAT,
LAYOUT_IN TYPE SLIS_LAYOUT_ALV,
LAYOUT_IN1 TYPE SLIS_LAYOUT_ALV.
CONSTANTS : GC_FORMNAME_TOP_OF_PAGE TYPE SLIS_FORMNAME VALUE
'TOP_OF_PAGE',
GC_FORMNAME_USER_COMMAND TYPE SLIS_FORMNAME VALUE
'USER_COMMAND',
GC_FORMNAME_BEFORE_OUTPUT TYPE SLIS_FORMNAME VALUE
'BEFORE_OUTPUT'.
ALV_EVENT TYPE SLIS_ALV_EVENT,
DATA EX_NO LIKE IT_CHDR-EXNUM VALUE 0.
DATA REGTYP_1 LIKE J_1IPART2-REGTYP.
SELECTION-SCREEN BEGIN OF BLOCK B WITH FRAME.
PARAMETERS WERKS TYPE J_1IEXCHDR-WERKS.
SELECT-OPTIONS : BUDAT FOR J_1IEXCHDR-EXDAT.
PARAMETERS : R1 RADIOBUTTON GROUP GRP DEFAULT 'X',
R2 RADIOBUTTON GROUP GRP.
SELECTION-SCREEN END OF BLOCK B.
INITIALIZATION.
G_REPID = SY-REPID.
G_SAVE = 'A'.
PERFORM BUILD_EVENT USING GT_EVENTS[].
PERFORM ALV_EVENT_INIT.
AT SELECTION-SCREEN.
REFRESH LIST_HEADER.
PERFORM TOP_OF_PAGE_LIST_HEADER USING LIST_HEADER.
START-OF-SELECTION.
PERFORM ALV_EVENT_INIT.
G_REPID = SY-REPID.
G_BACK_GROUND = ' ' .
IF R1 = 'X'.
CLEAR R2. CLEAR : REGTYP_1.
REGTYP_1 = 'A'.
set titlebar 'BALAJI' with DB_CNT.
ELSEIF R2 = 'X'.
CLEAR R1.CLEAR : REGTYP_1.
REGTYP_1 = 'C'.
set titlebar 'BALAJI1' with DB_CNT.
ENDIF.
SELECT * FROM J_1IPART2
INTO CORRESPONDING FIELDS OF TABLE IT_PART2
WHERE REGTYP = REGTYP_1 AND
TRNTYP = 'GRPO' AND
BUDAT IN BUDAT.
DOCYR = IT_CDTL-DOCYR AND
DOCNO = IT_CDTL-DOCNO.
LOOP AT IT_PART2.
SELECT SINGLE * FROM J_1IEXCHDR
INTO CORRESPONDING FIELDS OF IT_CHDR
WHERE TRNTYP = 'GRPO' AND
DOCYR = IT_PART2-DOCYR AND
DOCNO = IT_PART2-DOCNO AND
WERKS = WERKS AND
exdat IN BUDAT.
ORDER BY EXDAT.
IF SY-SUBRC = 0.
APPEND IT_CHDR.
ELSE.
CONTINUE.
ENDIF.
IF SY-SUBRC <> 0.
MESSAGE E084.
ENDIF.
ENDLOOP.
LOOP AT IT_CHDR.
SELECT * FROM J_1IEXCDTL
INTO CORRESPONDING FIELDS OF IT_CDTL
FOR ALL ENTRIES IN IT_CHDR
WHERE
TRNTYP = 'GRPO' AND
DOCNO = IT_CHDR-DOCNO AND
DOCYR = IT_CHDR-DOCYR AND
EXNUM = IT_CHDR-EXNUM AND
EXDAT = IT_CHDR-EXDAT AND
WERKS = IT_CHDR-WERKS.
IF SY-SUBRC = 0.
APPEND IT_CDTL.
ELSE.
CONTINUE.
ENDIF.
ENDSELECT.
ENDLOOP.
LOOP AT IT_CDTL.
CLEAR TEXT.
DB_CNT = DB_CNT + 1.
READ TABLE IT_CHDR WITH KEY EXNUM = IT_CDTL-EXNUM.
READ TABLE IT_PART2 WITH KEY DOCNO = IT_CDTL-DOCNO .
IT_OUT-SERIALNO = IT_PART2-SERIALNO.
SELECT SINGLE NAME1 FROM LFA1
INTO IT_OUT-NAME
WHERE LIFNR = IT_CDTL-LIFNR.
SELECT SINGLE * FROM LFA1
WHERE LIFNR = IT_CDTL-LIFNR.
IF LFA1-LAND1 EQ 'IN'.
TEXT = 'INVOICE'.
IT_OUT-TEXT1 = TEXT.
ELSE.
TEXT = 'BOE'.
IT_OUT-TEXT1 = TEXT.
ENDIF.
SELECT SINGLE * FROM J_1IMOVEND
WHERE LIFNR = IT_CDTL-LIFNR.
SELECT SINGLE * FROM DD07T
INTO IT_OUT-DDTEXT
WHERE DOMNAME = 'J_1IVTYP' AND
DDLANGUAGE = 'EN' AND
DOMVALUE_L = J_1IMOVEND-J_1IVTYP.
IF DD07T-DDTEXT = 'First Stage Dealer of indigenous excisable goods'
OR
DD07T-DDTEXT = 'Second Stage Dealer of indigenous excisablegoods'.
DD07T-DDTEXT = 'Dealer'.
ENDIF.
IT_OUT-DDTEXT = DD07T-DDTEXT.
ELSEIF DD07T-DDTEXT = 'Second Stage Dealer of indigenous excisable
*goods'.
DD07T-DDTEXT =
CLEAR EBELN_T.
SELECT SINGLE LFBNR FROM MSEG
INTO EBELN_T
WHERE MBLNR = IT_CDTL-RDOC2 .
SELECT SINGLE * FROM MSEG
WHERE BWART = '106' AND
LFBNR = EBELN_T ."and
ebeln = ebeln_t.
IF SY-SUBRC = 0.
IT_OUT-DEL_IND = 'X'.
ELSE.
IT_OUT-DEL_IND = ' '.
ENDIF.
SELECT SINGLE BUDAT FROM MKPF
INTO IT_OUT-BUDAT
WHERE MBLNR = EBELN_T ."MSEG-LFBNR.
IT_OUT-EXNUM = IT_CDTL-EXNUM.
IT_OUT-EXDAT = IT_CDTL-EXDAT.
IT_OUT-EXCCD = IT_CHDR-EXCCD.
IT_OUT-EXBAS = IT_CDTL-EXBAS.
IT_OUT-EXBED = IT_CDTL-EXBED.
IT_OUT-ECS = IT_CDTL-ECS.
IT_OUT-MATNR = IT_CDTL-MATNR.
IT_OUT-MAKTX = IT_CDTL-MAKTX.
IT_OUT-CHAPID = IT_CDTL-CHAPID.
IT_OUT-MENGE = IT_CDTL-MENGE.
IT_OUT-MEINS = IT_CDTL-MEINS.
APPEND IT_OUT.
EX_NO = IT_CDTL-EXNUM.
ENDLOOP.
Title Portion
IF REGTYP_1 = 'A'.
SET TITLEBAR 'BALAJI' WITH DB_CNT.
ELSEIF REGTYP_1 = 'C'.
SET TITLEBAR 'BALAJI1' WITH DB_CNT.
ENDIF.
AFIELD-COL_POS = 1.
AFIELD-FIELDNAME = 'SERIALNO'.
AFIELD-SELTEXT_L = 'INPUTS'.
AFIELD-JUST = 'L'.
APPEND AFIELD TO FIELDCAT.
AFIELD-COL_POS = 2.
AFIELD-FIELDNAME = 'TEXT1'.
AFIELD-SELTEXT_L = 'TYPE OF DOC'.
AFIELD-JUST = 'L'.
AFIELD-DECIMALS_OUT = '0'.
AFIELD-NO_ZERO = 'X'.
APPEND AFIELD TO FIELDCAT.
AFIELD-COL_POS = 3.
AFIELD-FIELDNAME = 'EXNUM'.
AFIELD-SELTEXT_L = 'DOC.NO'.
AFIELD-JUST = 'L'.
APPEND AFIELD TO FIELDCAT.
AFIELD-COL_POS = 4.
AFIELD-FIELDNAME = 'EXDAT'.
AFIELD-SELTEXT_L = 'DOC.DATE'.
AFIELD-JUST = 'C'.
APPEND AFIELD TO FIELDCAT.
AFIELD-COL_POS = 5.
AFIELD-FIELDNAME = 'NAME'.
AFIELD-SELTEXT_L = 'NAME OF THE SUPPLIER'.
AFIELD-NO_ZERO = 'X'.
AFIELD-JUST = 'L'.
APPEND AFIELD TO FIELDCAT.
AFIELD-COL_POS = 6.
AFIELD-FIELDNAME = 'DDTEXT'.
AFIELD-SELTEXT_L = 'TYPE-OF-SUPPLIER'.
AFIELD-JUST = 'L'.
APPEND AFIELD TO FIELDCAT.
AFIELD-COL_POS = 7.
AFIELD-FIELDNAME = 'EXCCD'.
AFIELD-SELTEXT_L = 'ECC OF THE SUPPLIER'.
AFIELD-NO_ZERO = 'X'.
AFIELD-JUST = 'L'.
APPEND AFIELD TO FIELDCAT.
AFIELD-COL_POS = 8.
AFIELD-FIELDNAME = 'BUDAT'.
AFIELD-SELTEXT_L = 'INPUT RECV DATE'.
AFIELD-JUST = 'C'.
APPEND AFIELD TO FIELDCAT.
AFIELD-COL_POS = 9.
AFIELD-FIELDNAME = 'EXBAS'.
AFIELD-SELTEXT_L = 'ASSESSABLE-VALUE'.
AFIELD-DO_SUM = 'X'.
AFIELD-JUST = 'R'.
AFIELD-DECIMALS_OUT = '2'.
APPEND AFIELD TO FIELDCAT.
AFIELD-COL_POS = 10.
AFIELD-FIELDNAME = 'EXBED'.
AFIELD-SELTEXT_L = 'DET OF CREDIT TAKEN CENVAT'.
AFIELD-JUST = 'R'.
APPEND AFIELD TO FIELDCAT.
AFIELD-COL_POS = 11.
AFIELD-FIELDNAME = 'ECS'.
AFIELD-SELTEXT_L = 'DET OF CREDIT TAKEN E-CESS'.
AFIELD-JUST = 'R'.
APPEND AFIELD TO FIELDCAT.
AFIELD-COL_POS = 12.
AFIELD-FIELDNAME = 'MATNR'.
AFIELD-SELTEXT_L = 'MATERIAL-CODE'.
AFIELD-JUST = 'L'.
APPEND AFIELD TO FIELDCAT.
AFIELD-COL_POS = 13.
AFIELD-FIELDNAME = 'MAKTX'.
AFIELD-SELTEXT_L = 'DESCRIPTION'.
AFIELD-JUST = 'L'.
APPEND AFIELD TO FIELDCAT.
AFIELD-COL_POS = 14.
AFIELD-FIELDNAME = 'CHAPID'.
AFIELD-SELTEXT_L = 'TARIFF-ID'.
AFIELD-JUST = 'L'.
APPEND AFIELD TO FIELDCAT.
AFIELD-COL_POS = 15.
AFIELD-FIELDNAME = 'MENGE'.
AFIELD-SELTEXT_L = 'QUANTITY'.
AFIELD-JUST = 'R'.
AFIELD-DO_SUM = ' '.
APPEND AFIELD TO FIELDCAT.
AFIELD-COL_POS = 16.
AFIELD-FIELDNAME = 'MEINS'.
AFIELD-SELTEXT_L = 'UOM'.
AFIELD-JUST = 'C'.
APPEND AFIELD TO FIELDCAT.
AFIELD-COL_POS = 17.
AFIELD-FIELDNAME = 'DEL_IND'.
AFIELD-SELTEXT_L = 'Deleted'.
AFIELD-JUST = 'C'.
APPEND AFIELD TO FIELDCAT.
* LAYOUT FOR ZEBRA CATLOG
LAYOUT_IN-COLWIDTH_OPTIMIZE = 'X'.
LAYOUT_IN-ZEBRA = 'X'.
LAYOUT_IN-GET_SELINFOS = 'X'.
LAYOUT_IN-CONFIRMATION_PROMPT = 'X'.
LAYOUT_IN-DETAIL_POPUP = 'X' .
SORTCAT-decimals = '0'.
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
EXPORTING
I_CALLBACK_PROGRAM = G_REPID
I_CALLBACK_USER_COMMAND = 'USER_COMMAND'
I_SAVE = G_SAVE
IS_VARIANT = GS_VARIANT
IT_FIELDCAT = FIELDCAT
IT_SORT = SORTCAT
IS_LAYOUT = LAYOUT_IN
IT_EVENTS = EVENTCAT
I_BACKGROUND_ID = g_back_ground
TABLES
T_OUTTAB = IT_OUT.
*& Form TOP_OF_PAGE_LIST_HEADER
text
-->LIST_HEADERtext
FORM TOP_OF_PAGE_LIST_HEADER USING LIST_HEADER TYPE SLIS_T_LISTHEADER.
DATA : HLINE TYPE SLIS_LISTHEADER,
TEXT(60) TYPE C.
CLEAR : HLINE,TEXT.
HLINE-TYP = 'H'.
WRITE 'ROOTS INDUSTRIES LTD' TO TEXT.
HLINE-INFO = TEXT.
APPEND HLINE TO LIST_HEADER.
SELECT SINGLE * FROM T001W WHERE WERKS = WERKS.
CLEAR : HLINE,TEXT.
HLINE-TYP = 'H'.
WRITE 'PLANT :' TO TEXT.
WRITE WERKS TO TEXT+8.
HLINE-INFO = TEXT.
APPEND HLINE TO LIST_HEADER.
CLEAR : HLINE,TEXT.
HLINE-TYP = 'H'.
WRITE T001W-NAME1 TO TEXT.
HLINE-INFO = TEXT.
APPEND HLINE TO LIST_HEADER.
CLEAR : HLINE,TEXT.
HLINE-TYP = 'H'.
WRITE T001W-STRAS TO TEXT.
HLINE-INFO = TEXT.
APPEND HLINE TO LIST_HEADER.
CLEAR : HLINE,TEXT.
HLINE-TYP = 'H'.
WRITE T001W-ORT01 TO TEXT.
HLINE-INFO = TEXT.
APPEND HLINE TO LIST_HEADER.
CLEAR : HLINE,TEXT.
HLINE-TYP = 'H'.
WRITE 'DATE :' TO TEXT.
WRITE BUDAT-LOW TO TEXT+7.
IF BUDAT-HIGH NE ''.
WRITE 'TO' TO TEXT+18.
WRITE BUDAT-HIGH TO TEXT+22.
ENDIF.
HLINE-INFO = TEXT.
APPEND HLINE TO LIST_HEADER.
ENDFORM. "TOP_OF_PAGE_LIST_HEADER
*& Form ALV_EVENT_INIT
text
FORM ALV_EVENT_INIT .
CLEAR ALV_EVENT.
ALV_EVENT-NAME = SLIS_EV_TOP_OF_PAGE.
ALV_EVENT-FORM = 'ALV_TOP_OF_PAGE'.
APPEND ALV_EVENT TO EVENTCAT.
CLEAR ALV_EVENT.
ALV_EVENT-NAME = SLIS_EV_TOP_OF_LIST.
ALV_EVENT-FORM = 'ALV_TOP_OF_LIST'.
APPEND ALV_EVENT TO EVENTCAT.
CLEAR ALV_EVENT.
ALV_EVENT-NAME = SLIS_EV_END_OF_LIST.
ALV_EVENT-FORM = 'ALV_END_OF_LIST'.
APPEND ALV_EVENT TO GT_EVENTS.
CLEAR ALV_EVENT.
ALV_EVENT-NAME = SLIS_EV_END_OF_PAGE.
ALV_EVENT-FORM = 'ALV_END_OF_PAGE'.
APPEND ALV_EVENT TO GT_EVENTS.
ENDFORM. "ALV_EVENT_INIT
*& Form ALV_TOP_OF_PAGE
text
FORM ALV_TOP_OF_PAGE.
CALL FUNCTION 'REUSE_ALV_COMMENTARY_WRITE'
EXPORTING
IT_LIST_COMMENTARY = LIST_HEADER
I_LOGO = 'ENJOYSAP_LOGO'.
ENDFORM. "ALV_TOP_OF_PAGE
*& Form BUILD_EVENT
text
-->P_GT_EVENTS[] text
FORM BUILD_EVENT USING P_EVENTS TYPE SLIS_T_EVENT.
CALL FUNCTION 'REUSE_ALV_EVENTS_GET'
EXPORTING
I_LIST_TYPE = 0
IMPORTING
ET_EVENTS = P_EVENTS
EXCEPTIONS
LIST_TYPE_WRONG = 1
OTHERS = 2.
READ TABLE P_EVENTS WITH KEY NAME = SLIS_EV_USER_COMMAND INTO
ALV_EVENT.
IF SY-SUBRC = 0.
MOVE GC_FORMNAME_USER_COMMAND TO ALV_EVENT-FORM.
APPEND ALV_EVENT TO P_EVENTS.
ENDIF.
READ TABLE P_EVENTS WITH KEY NAME = SLIS_EV_BEFORE_LINE_OUTPUT INTO
ALV_EVENT.
IF SY-SUBRC = 0.
MOVE GC_FORMNAME_BEFORE_OUTPUT TO ALV_EVENT-FORM.
APPEND ALV_EVENT TO P_EVENTS.
ENDIF.
ENDFORM. " BUILD_EVENT
this wud help u

Display amount in ALV Grid with different Decimal Places based on Currency

HI Experts,
Working with ALV Report i have one Amount field NETWR which is having Length 15 and Decimal Places 2.
we have two different types of currency's AED and KWD and AED having 2 decimal Places and KWD having 3 decimal places.
im using FM: REUSE_ALV_GRID_DISPLAY for Display. value storing in Table was like this
AED---22.56
KWD---225.65
i need to display values like AED : 22.56

HI Experts,
Working with ALV Report i have one Amount field NETWR which is having Length 15 and Decimal Places 2. we have two different types of currency's AED and KWD and AED having 2 decimal Places and KWD having 3 decimal places.
im using FM: REUSE_ALV_GRID_DISPLAY for Display. value storing in Table was like this
AED---22.56
KWD---225.65 (converting this value to 22.565 using BAPI_CURRENCY_GETDECIMALS according to currency in my Report)
i need to display values like AED : 22.56
KWD---22.565 but here field is NETWR with 2 decimal.
Need to Display amount in ALV Grid with different Decimal Places based on Currency
Regards,
Dileep Kumar Reddy

TEXT to be retrieved from a DOMAIN and to be displayed in an ALV report.

Hi,
I am required to develop a report where, the retrieved data needs to be displayed in an ALV. In the Report Specification, the requirement is that a text needs to be retrieved from a DOMAIN.
e.g. Text to be retrieved from Domain EICST where Fix Val = PA0210-EICST (where subtype = FED).
Regards,
Ameet

HI ,
There are lot of FM to retrive the domian text from the fixed value.
For ex. C_DIC_DOMAIN_VALUE_TEXT_READ
You can find some more using the F4 help.
Thanks,
Poonam.

SAP ERP 6.0 - Problems displaying numbers in ALV (i.e tx. se16n)

Hi, We've just upgraded our system from version 46C to version 6.0.
As the result of the process we're experiecing a problem when displaying numbers with ALV reports, even with standard transactions.
For example, when running the transaction se16n to display the content of the table CABN table, the value of the ATINN field (NUMC) is replaced by the value of other field ATNAM (CHAR 30).
This situation doesn't happen when consulting data in se16 transaction (here we display the result in se16 standard list).
We also experienced this problem in Z programs showing data in ALV reports..
Any help on this would be appreciated.!!!
Thank you

ORA-00959: tablespace 'PSAPSR3ODS' does not exist
Create the tablespace PSAPSR3ODS through brtools, or sql commands.
Update the import_state.properties where you replace the "-" with "0" for the packages that you want to retry.
Then set the JAVA_HOME environment, and then run the import_monitor.sh.

Problem in displaying decimals in ALV

Hello Everyone,
I am facing problem in displaying decimals in ALV
Here i want to display 1.00000- but is displaying as 1,000.00-
Is there any solution by not using REPLACE and changing the user settings. Please let me know. <removed by moderator>
Thanks in advance.
Radha.
Edited by: Thomas Zloch on Dec 12, 2011 6:23 PM

- If this is a currency amount or a quantity, did you correctly define the link to currency code or quantity unit of measure ?
(Many available documents to read like [Value Display with Currency/Quantity Unit|http://help.sap.com/saphelp_erp2004/helpdata/en/ff/4649b1f17411d2b486006094192fe3/frameset.htm])
- If this is not such a field, but a basic numeric type, did you try to fill DECIMALS_O in the field catalog ?
Regards,
Raymond

Fewer than expected group outlines after display Excel inplace ALV

After upgrade 4.6 to ECC, I save alv grid layout with sorting and total function . If you switch to the Excel inplace display in ALV, the system displays an "group outlines" option in only first page (nearly 14 groups) . But the next page cannot group the same data in 1 value and no yellow color in subtotal lines
For example :
Current :
Material number   | transaction data |   origin   | actual cost   |
10                     | Good issue       |    A        |   10              |
10                     | Good issue       |    B        |   20              |
10                     |   Good issue      |    C        |   30              |
10                     | Good issue       |              |   60              | *   >>> No yellow color
Need :
Material number   | transaction data |   origin   | actual cost   |
10                     | Good issue       |    A        |   10              |
B
20
C
30
10                     | Good issue       |              |   60              | *   >>> Have yellow color
Please give me the solution ...

I apply many sap note but it can not solve this issue...
1046560 WD ABAP ALV (SP13): Eliminate duplicate code
1065242 WD ABAP ALV (SP13): Export to Excel, Problems during load
1067707 WD ABAP ALV (SP13): Export Excel hyperlink w/o reference
1075242 WD ABAP, ALV, export, Excel, counting table entries
1083072 ABAP ALV Export: Missing icon display
1084202 ABAP: ALV export: Icons missing in subtotals
Please help to solve this problem ...

Toolbar in alv display using oops alv

i have written code for displaying toolbar in alv display using oops, but it is not displaying please find the below code and let me know reason.
*& Report ZTRANSFER_ORDER2                                            *
REPORT ZTRANSFER_ORDER2   .
*& Report ZTRANSFER_ORDER                                             *
   TABLES:sflight.
   TYPE-POOLS : icon.
* G L O B A L   I N T E R N A L   T A B L E S
CLASS lcl_event_receiver DEFINITION DEFERRED.
types : begin of ty_mara,
        matnr type matnr,
        mtart type mtart,
        mbrsh type mbrsh,
        matkl type matkl,
        bismt type bismt,
        meins type meins,
        end of ty_mara.
DATA: t_mara type STANDARD TABLE OF ty_mara.
* G L O B A L   D A T A
   DATA: ok_code LIKE sy-ucomm,
         g_wa_mara type ty_mara.
    DATA : t_fcat type LVC_T_FCAT.
DATA : l_VAR TYPE disvariant.
DATA : gs_layout type lvc_s_layo.
* Declare reference variables to the ALV grid and the container
G L O B A L   D A T A
DATA: ok_code LIKE sy-ucomm.
Declare reference variables to the ALV grid and the container
   DATA:
     go_grid             TYPE REF TO cl_gui_alv_grid,
     go_custom_container TYPE REF TO cl_gui_custom_container.
data : it_toolbar TYPE stb_button,
event_receiver TYPE REF TO lcl_event_receiver.
* S T A R T - O F - S E L E C T I O N.
   START-OF-SELECTION.
    CALL SCREEN 100   .
*CLASS lcl_event_receiver DEFINITION.
CLASS lcl_event_receiver DEFINITION.
PUBLIC SECTION.
    CLASS-METHODS:
*handling toolbar for interactive
     handle_toolbar
        FOR EVENT toolbar OF cl_gui_alv_grid
            IMPORTING e_object e_interactive,
*handling menu button
     handle_menu_button
        FOR EVENT menu_button OF cl_gui_alv_grid
            IMPORTING e_object e_ucomm,
*On click of the menu button
    handle_user_command
        FOR EVENT user_command OF cl_gui_alv_grid
            IMPORTING e_ucomm.
    PRIVATE SECTION.
    ENDCLASS.
CLASS lcl_event_receiver IMPLEMENTATION.
METHOD handle_toolbar.
handle toolbar
CLEAR it_toolbar.
MOVE 'DETAIL' TO it_toolbar-function.
    MOVE icon_detail TO it_toolbar-icon.
    MOVE 2 TO it_toolbar-butn_type.
    APPEND it_toolbar TO e_object->mt_toolbar.
    ENDMETHOD.                    "handle_toolbar
    METHOD handle_menu_button.
handle own menubuttons
    IF e_ucomm = 'DETAIL'.
      CALL METHOD e_object->add_function
        EXPORTING
          fcode = 'DISPLAY'
          text = 'DISPLAY'.
    ENDIF.
ENDMETHOD.                    "handle_menu_button
METHOD handle_user_command.
*On click
    CASE e_ucomm.
      WHEN 'DISPLAY'.
        MESSAGE 'Menu Clicked' TYPE 'I'.
    ENDCASE.
ENDMETHOD.                           "handle_user_command
ENDCLASS.                    "lcl_event_receiver IMPLEMENTATION
*&      Module USER_COMMAND_0100 INPUT
MODULE user_command_0100 INPUT.
    CASE ok_code.
      WHEN 'EXIT'.
        LEAVE TO SCREEN 0.
    ENDCASE.
ENDMODULE.                 " USER_COMMAND_0100 INPUT
*&      Module STATUS_0100 OUTPUT
   MODULE status_0100 OUTPUT.
    sET PF-STATUS 'STATUS'.
Create objects
     IF go_custom_container IS INITIAL.
       CREATE OBJECT go_custom_container
         EXPORTING container_name = 'ALV_CONTAINER'.
       CREATE OBJECT go_grid
         EXPORTING
           i_parent = go_custom_container.
       PERFORM load_data_into_grid.
     ENDIF.
   ENDMODULE.                 " STATUS_0100 OUTPUT
*&      Form load_data_into_grid
   FORM load_data_into_grid.
Read data from table SFLIGHT
     SELECT matnr mtart mbrsh matkl bismt meins
       FROM mara
       INTO corresponding fields of TABLE t_mara.
   PERFORM fld_cate changing T_fcat.
    l_var-report = sy-repid.
gs_layout-grid_title = 'Analysis Report'.
gs_layout-NO_TOOLBAR = 'X'.
gs_layout-BOX_FNAME = 'Selection'.
Load data into the grid and display them
        caLL METHOD go_grid->set_table_for_first_display
        EXPORTING
        i_structure_name = 'S_MVKE'
          i_save          = 'A'
           is_variant       = l_var
            is_layout             = gs_layout
       CHANGING
         it_outtab        = t_mara[]
         it_fieldcatalog = t_fcat.
endform.
*&      Module pai INPUT
      text
MODULE pai INPUT.
data: l_valid type c.
   clear ok_code.
   break-point.
   ok_code = sy-ucomm.
       CASE ok_code.
       WHEN 'EXIT'.
         LEAVE TO SCREEN 0.
       WHEN 'BACK'.
         call method go_grid->check_changed_data
             importing
                e_valid = l_valid.
        loop at t_mara into g_wa_mara.
        endloop.
     ENDCASE.
ENDMODULE.                 " pai INPUT
*&      Form fld_cate
      text
     <--P_T_FCAT text
FORM fld_cate CHANGING P_T_FCAT TYPE lvc_t_fcat.
DATA : s_fcat type LVC_S_FCAT .
REFRESH: t_fcat.
CLEAR s_fcat.
s_fcat-fieldname = 'BOX1'.
s_fcat-coltext =   'Box1'.
s_fcat-seltext =   'Box1'.
s_fcat-CHECKBOX = 'X'.
s_fcat-EDIT = 'X'.
APPEND s_fcat TO P_T_FCAT.
CLEAR s_fcat.
s_fcat-row_pos = 1.
s_fcat-col_pos = 1.
s_fcat-fieldname = 'MATNR'.
s_fcat-ref_field = 'MATNR'.
s_fcat-ref_table = 'T_MARA'.
s_fcat-coltext =   'Material'.
s_fcat-seltext =   'Material'.
s_fcat-EDIT = 'X'.
APPEND s_fcat TO P_T_FCAT.
CLEAR s_fcat.
   s_fcat-row_pos = 2.
s_fcat-col_pos = 2.
s_fcat-fieldname = 'MTART'.
s_fcat-ref_field = 'MTART'.
s_fcat-ref_table = 'T_MARA'.
s_fcat-coltext =   'Material type'.
s_fcat-seltext =   'Material type'.
APPEND s_fcat TO P_T_FCAT.
CLEAR s_fcat.
s_fcat-fieldname = 'BOX2'.
s_fcat-coltext =   'Box2'.
s_fcat-seltext =   'Box2'.
s_fcat-CHECKBOX = 'X'.
s_fcat-EDIT = 'X'.
APPEND s_fcat TO P_T_FCAT.
CLEAR s_fcat.
s_fcat-row_pos = 3.
s_fcat-col_pos = 3.
s_fcat-fieldname = 'MBRSH'.
s_fcat-ref_field = 'MBRSH'.
s_fcat-ref_table = 'T_MARA'.
s_fcat-coltext =   'Industry Sector'.
s_fcat-seltext =   'Industry Sector'.
APPEND s_fcat TO P_T_FCAT.
CLEAR s_fcat.
    s_fcat-row_pos = 4.
s_fcat-col_pos = 4.
s_fcat-fieldname = 'MATKL'.
s_fcat-ref_field = 'MATKL'.
s_fcat-ref_table = 'T_MARA'.
s_fcat-coltext =   'Material Group'.
s_fcat-seltext =   'Material Group'.
APPEND s_fcat TO P_T_FCAT.
CLEAR s_fcat.
    s_fcat-row_pos = 5.
s_fcat-col_pos = 5.
s_fcat-fieldname = 'BISMT'.
s_fcat-ref_field = 'BISMT'.
s_fcat-ref_table = 'T_MARA'.
s_fcat-coltext =   'Old material number'.
s_fcat-seltext =   'Old material number'.
APPEND s_fcat TO P_T_FCAT.
CLEAR s_fcat.
    s_fcat-row_pos = 6.
s_fcat-col_pos = 6.
s_fcat-fieldname = 'MEINS'.
s_fcat-ref_field = 'MEINS'.
s_fcat-ref_table = 'T_MARA'.
s_fcat-coltext =   'Base Unit of Measure'.
s_fcat-seltext =   'Base Unit of Measure'.
APPEND s_fcat TO P_T_FCAT.
CLEAR s_fcat.
s_fcat-fieldname = 'BOX3'.
s_fcat-coltext =   'Box3'.
s_fcat-seltext =   'Box3'.
s_fcat-CHECKBOX = 'X'.
s_fcat-EDIT = 'X'.
APPEND s_fcat TO P_T_FCAT.
ENDFORM.                    " fld_cate                     .

MOVE 2 TO it_toolbar-butn_type.
Try changing the 2 (menu) to 0 (button) and see if that helps
also you need to set the event handler after you create your alv object
set handler handle_toolbar for [whatever object is called].
Edited by: Kev Mycock on Jul 24, 2008 7:59 AM

How to display an OO ALV in a Popup?

The ALV will be non-editable but it has to be able to have the hotspot functionality, so it has to be done in OO. Is there any function module that will display my OO alv as a popup?

* Show as popup
   CALL METHOD gr_grid->set_screen_popup( EXPORTING start_column = 10
                                                    end_column = 130
                                                    start_line = 5
                                                    end_line = 15 ).
* Define a column as hotspot
DATA:
          lr_columns TYPE REF TO cl_salv_columns_table,
           lr_column TYPE REF TO cl_salv_column,
           lr_cols   TYPE REF TO cl_salv_columns,
           lr_column_list TYPE REF TO cl_salv_column_list.
lr_cols = lr_columns.
lr_columns = gr_grid->get_columns( ).
lr_column_list ?= lr_cols->get_column( 'MYCOLUMN' ).
lr_column_list->set_cell_type( if_salv_c_cell_type=>hotspot ).

Not able to display logo on alv grid output

hi
can anybody guide me.
i have written code for displaying logo on alv grid report.
i uploaded bmp image using OAER
but even then i am not able to display logo on the report please help me
i am using 4.7 version..
code...
REPORT ZALVLOGO                                .
type-pools: slis.
data: i_sflight type table of sflight.
*data: begin of i_sflight occurs 10.
*include structure sflight.
*data: end of i_sflight.
data: it_events type slis_t_event,
       wa_events type slis_alv_event.
select * from sflight into table i_sflight.
perform form_fill_table.
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
EXPORTING
   I_CALLBACK_TOP_OF_PAGE            = 'top-of-page'
   I_STRUCTURE_NAME                  = 'sflight'
TABLES
    T_OUTTAB                          = i_sflight
EXCEPTIONS
PROGRAM_ERROR                     = 1
OTHERS                            = 2
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
        WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
*&      Form top_of_page
      text
--> p1        text
<-- p2        text
FORM top-of-page .
data: t_header type slis_t_listheader,
      wa_header type slis_listheader.
wa_header-typ = 'h'.
wa_header-info = 'FLIGHT DETAILS'.
APPEND wa_header to t_header.
CLEAR WA_HEADER.
CALL FUNCTION 'REUSE_ALV_COMMENTARY_WRITE'
EXPORTING
    IT_LIST_COMMENTARY       = t_header
    I_LOGO                   = 'ENJOY'.
I_END_OF_LIST_GRID       =.
ENDFORM.                    " top_of_page
*&      Form form_fill_table
      text
--> p1        text
<-- p2        text
FORM form_fill_table .
clear wa_events.
wa_events-name = 'top-op-page1'.
wa_events-form = 'top-of-page'.
append wa_events to it_events.
ENDFORM.                    " form_fill_table

hi ,
First upload images in SAP using transaction se78
http://www.howforge.com/step-by-step-upload-bitmap-images-to-sap
Then use that Image name to call using function module
in top of -page
call function 'REUSE_ALV_COMMENTARY_WRITE'
      exporting
        i_logo             = 'KAL1_LOGO'
        it_list_commentary = lt_top_of_page_no_sel.
Regards
Deepak.

WD4A : Displaying images in ALV table

Hi,
Does anyone know how to display images in ALV tables in Webdynpro?

Hello,
You can define an attribute in the context with the type CHAR 30 and define it value like an icon from WDA (like ~Icon/GreenLed). And then you need to create an method to define the attributes of the column that will have the image like follows:
METHOD display_alv .
DATA: lr_alv_usage       TYPE REF TO   if_wd_component_usage,
        lr_config          TYPE REF TO   cl_salv_wd_config_table,
        lr_col_header      TYPE REF TO   cl_salv_wd_column_header,
        lr_function_wd     TYPE REF TO   cl_salv_wd_function,
        lr_button          TYPE REF TO   cl_salv_wd_fe_button,
        lr_image           TYPE REF TO   cl_salv_wd_uie_image,
        lr_header          TYPE REF TO   cl_salv_wd_header,
        lr_uie_link        TYPE REF TO   cl_salv_wd_uie_link_to_action,
        lr_if_controller   TYPE REF TO   iwci_salv_wd_table,
        lr_function_set    TYPE REF TO   if_salv_wd_function_settings,
        lr_table_settings TYPE REF TO   if_salv_wd_table_settings,
        lr_column_settings TYPE REF TO   if_salv_wd_column_settings.
DATA: lt_columns         TYPE          salv_wd_t_column_ref,
        ls_column          TYPE          salv_wd_s_column_ref,
        lv_text            TYPE          string.
* Instantiate ALV Component
lr_alv_usage = wd_this->wd_cpuse_all_alv( ).
IF lr_alv_usage->has_active_component( ) IS INITIAL.
    lr_alv_usage->create_component( ).
ENDIF.
* get reference to model
lr_if_controller = wd_this->wd_cpifc_all_alv( ).
lr_config        = lr_if_controller->get_model( ).
* modify visible rows
lr_config->if_salv_wd_table_settings~set_visible_row_count( iv_rows ).
lr_config->if_salv_wd_table_settings~set_selection_mode(
                                       wd_assist->co_alv_selmode ).
* create function
lr_function_set ?= lr_config.
lr_function_wd = lr_function_set->create_function(
                   wd_assist->co_func_det_nfe ).
CREATE OBJECT lr_button.
*read text
lv_text = wd_assist->read_text( iv_key = '002' ).
lr_button->set_text( lv_text ).
lv_text = wd_assist->read_text( iv_key = '001' ).
lr_button->set_tooltip( lv_text ).
lr_button->set_image_source( wd_assist->co_icon_seldet ).
lr_function_wd->set_editor( lr_button ).
* set table header
lr_table_settings ?= lr_config.
lr_header = lr_table_settings->get_header( ).
lv_text = wd_assist->read_text( iv_key = '003' ).
lr_header->set_text( lv_text ).
lv_text = wd_assist->read_text( iv_key = '004' ).
lr_header->set_tooltip( lv_text ).
lr_header->set_image_source( wd_assist->co_icon_list ).
lr_column_settings ?= lr_config.
lt_columns = lr_column_settings->get_columns( ).
LOOP AT lt_columns INTO ls_column.
    CASE ls_column-id.
      WHEN 'ICON'.
        CREATE OBJECT lr_image.
        lr_image->set_source_fieldname( ls_column-id ).
        lr_image->set_tooltip_fieldname( 'ICON_TOOLTIP' ).
        ls_column-r_column->set_cell_editor( lr_image ).
      WHEN 'ID'.
        CREATE OBJECT lr_uie_link.
        lr_uie_link->set_text_fieldname( ls_column-id ).
        ls_column-r_column->set_cell_editor( lr_uie_link ).
      WHEN 'ICON_TOOLTIP' or 'LOGSYS'.
        ls_column-r_column->set_visible(
                           cl_wd_uielement=>e_visible-none ).
    ENDCASE.
*set header binding of medium description, otherwise title
    lr_col_header = ls_column-r_column->get_header( ).
    lr_col_header->set_ddic_binding_field(
                        if_salv_wd_c_column_settings=>ddic_bind_medium ).
ENDLOOP.
ENDMETHOD.
Here will be showed an icon (column ICON) and an link (column ID).
Regards,

Hi please send code for displaying index in alv report

hi
thanx in advance.
code please for displaying index in alv report.
thanx
rocky

add one more field to ur internal table
index type i .
before u display ALV
loop at itab.
itab-index = sy-tabix.
modify itab index sy-tabix.
endloop.
Message was edited by:
chandrasekhar jagarlamudi

Display problm in alv

Similar Messages

Maybe you are looking for