Display Radio bar values horizontally
hi,
I have created a radio bar which return some set of values i need to display the values horizontally instead of showing in vertically please suggest me how to show the values
this query i am using to display is this
SELECT NAME D,ID R FROM TASKS WHERE PRO_ID = :P61_PROJECTS
Thanks
Sudhir
Hello Sudhir,
In the LOV part of the 'Edit Page Item' screen you can set the 'Number of Columns' to something else than 1 to layout the item horizontally. You need to enter a fixed length (for your dynamic query), so use something 'big' like 5 or 10 or so.
Regards,
Roel
http://roelhartman.blogspot.com/
http://www.bloggingaboutoracle.org/
http://www.logica.com/
Similar Messages
-
Display query columns in horizontal
Hi all
I'm creating a report using sql commands only(no report builder). I'd like to have my columns to be displayed in horizontal followed by its value. So far I've made it, however I can't get them to be displayed well where all the columns are in the same position as well as the results.
HECS:Higher Education Cafetaria Service
Restaurant and Bar
Membership Report
Date:DateVar
Member ID: 11
Member Name:Donald Anatidae Position:Senior Lecturer
Institution Name:UVan Department:Department of Computers
Phone:03-6355-9876 Employment:Tenured
Annual Fee: $225.25 Monthly Fee: $1.88
GST: $22.53 GST: $20.65
Annual Fee|(including GST): $247.Monthly Fee|(including GST): $20.65
-- Declaring variables
COLUMN Date NOPRINT NEW_VALUE DateVar
COLUMN ID NOPRINT NEW_VALUE IDVar
COLUMN Name NOPRINT NEW_VALUE NameVar
COLUMN Department NOPRINT NEW_VALUE DepartVar
COLUMN Phone NOPRINT NEW_VALUE PhoneVar
COLUMN Institution NOPRINT NEW_VALUE InstiVar
COLUMN Position NOPRINT NEW_VALUE PosVar
COLUMN Employment NOPRINT NEW_VALUE EmployVar
COLUMN Annual_Fee NOPRINT NEW_VALUE AnnualVar
COLUMN GST NOPRINT NEW_VALUE AGSTVar
COLUMN Annual_GST NOPRINT NEW_VALUE AnnuaGSTVar
COLUMN M_GST NOPRINT NEW_VALUE MgstVar
COLUMN Month_Fee NOPRINT NEW_VALUE MonthFeeVar
COLUMN Monthy_Gst NOPRINT NEW_VALUE MonthGstVar
BREAK ON ID SKIP Page
TTITLE CENTER 'HECS:Higher Education Cafetaria Service' SKIP 1 -
CENTER 'Restaurant and Bar' SKIP 2 -
LEFT 'Membership Report' SKIP 2 -
LEFT 'Date:'DateVar SKIP 2 -
LEFT COL 6 'Member ID:'IDVar SKIP 1 -
LEFT ------------------------------------------------------------------------------ SKIP 1 -
LEFT COL 6 'Member Name:' NameVar RIGHT 'Position:' PosVar SKIP 1-
LEFT COL 6 'Institution Name:'InstiVar COL 15 RIGHT 'Department:'DepartVar SKIP 1 -
LEFT COL 6 'Phone:'PhoneVar COL 15 RIGHT 'Employment:' EmployVar SKIP 1 -
LEFT COL 6 'Annual Fee:'FORMAT $9,990.99 AnnualVar -
RIGHT 'Monthly Fee:'FORMAT $9,990.99 MonthFeeVar SKIP 1 -
LEFT COL 6 'GST:'FORMAT $9,990.99 AGSTVar -
RIGHT 'GST:'FORMAT $9,990.99 MonthGstVar SKIP 1 -
LEFT ------------------------------------------------------------------------------ SKIP 1 -
LEFT COL 6 'Annual Fee|(including GST):'FORMAT $9,990.99 AnnuaGSTVar -
RIGHT 'Monthly Fee|(including GST):'FORMAT $9,990.99 MonthGstVar SKIP 1 -
LEFT -------------------------------------------------------------------------------
[\pre]
I'd like to know is whether there is another way to display the columns in horizontal.
ThanxHe gave you the general idea. The following takes it a step further.
scott@ORA92> CLEAR COLUMNS
scott@ORA92> TTITLE OFF
scott@ORA92> COLUMN today NEW_VALUE DateVar
scott@ORA92> SELECT SYSDATE AS today FROM DUAL
2 /
TODAY
17-APR-2006
scott@ORA92> TTITLE CENTER 'HECS: Higher Education Cafetaria Service' SKIP 1 -
CENTER 'Restaurant and Bar' SKIP 2scott@ORA92> COLUMN membership_report HEADING 'Membership Report||Date: &DateVar|'
scott@ORA92> SELECT 'Member ID: ' || e.empno
2 || CHR(10)
3 || '-------------------------------------------------------------'
4 || CHR(10)
5 || 'Member Name: ' || RPAD (e.ename, 20) || 'Position: ' || e.job
6 || CHR(10)
7 || 'Institution: ' || RPAD (d.deptno, 20) || 'Department: ' || d.dname
8 || CHR(10)
9 || 'Salary: ' || RPAD (TO_CHAR (e.sal, '$9,990.99'), 20)
10 || 'Commission: ' || TO_CHAR (e.comm, '$9,990.99')
11 || CHR(10)
12 || '-------------------------------------------------------------'
13 || CHR(10)
14 || 'Annual Fee: ' || RPAD (TO_CHAR (e.sal, '$9,990.99'), 20)
15 || 'Monthly Fee: ' || (TO_CHAR (e.sal/12, '$9,990.99'))
16 || CHR(10)
17 || '-------------------------------------------------------------'
18 || CHR(10)
19 || CHR(10)
20 AS membership_report
21 FROM emp e, dept d
22 WHERE e.deptno = d.deptno
23 /
HECS: Higher Education Cafetaria Service
Restaurant and Bar
Membership Report
Date: 17-APR-2006
Member ID: 7369
Member Name: SMITH Position: CLERK
Institution: 20 Department: RESEARCH
Salary: $800.00 Commission:
Annual Fee: $800.00 Monthly Fee: $66.67
Member ID: 7499
Member Name: ALLEN Position: SALESMAN
Institution: 30 Department: SALES
Salary: $1,600.00 Commission: $300.00
Annual Fee: $1,600.00 Monthly Fee: $133.33
Member ID: 7521
Member Name: WARD Position: SALESMAN
Institution: 30 Department: SALES
Salary: $1,250.00 Commission: $500.00
Annual Fee: $1,250.00 Monthly Fee: $104.17
Member ID: 7566
Member Name: JONES Position: MANAGER
Institution: 20 Department: RESEARCH
Salary: $2,975.00 Commission:
Annual Fee: $2,975.00 Monthly Fee: $247.92
Member ID: 7654
Member Name: MARTIN Position: SALESMAN
Institution: 30 Department: SALES
Salary: $1,250.00 Commission: $1,400.00
Annual Fee: $1,250.00 Monthly Fee: $104.17
Member ID: 7698
Member Name: BLAKE Position: MANAGER
Institution: 30 Department: SALES
Salary: $2,850.00 Commission:
Annual Fee: $2,850.00 Monthly Fee: $237.50
Member ID: 7782
Member Name: CLARK Position: MANAGER
Institution: 10 Department: ACCOUNTING
Salary: $2,450.00 Commission:
Annual Fee: $2,450.00 Monthly Fee: $204.17
Member ID: 7788
Member Name: SCOTT Position: ANALYST
Institution: 20 Department: RESEARCH
Salary: $3,000.00 Commission:
Annual Fee: $3,000.00 Monthly Fee: $250.00
Member ID: 7839
Member Name: KING Position: PRESIDENT
Institution: 10 Department: ACCOUNTING
Salary: $5,000.00 Commission:
Annual Fee: $5,000.00 Monthly Fee: $416.67
Member ID: 7844
Member Name: TURNER Position: SALESMAN
Institution: 30 Department: SALES
Salary: $1,500.00 Commission: $0.00
Annual Fee: $1,500.00 Monthly Fee: $125.00
Member ID: 7876
Member Name: ADAMS Position: CLERK
Institution: 20 Department: RESEARCH
Salary: $1,100.00 Commission:
Annual Fee: $1,100.00 Monthly Fee: $91.67
Member ID: 7900
Member Name: JAMES Position: CLERK
Institution: 30 Department: SALES
Salary: $950.00 Commission:
Annual Fee: $950.00 Monthly Fee: $79.17
Member ID: 7902
Member Name: FORD Position: ANALYST
Institution: 20 Department: RESEARCH
Salary: $3,000.00 Commission:
Annual Fee: $3,000.00 Monthly Fee: $250.00
Member ID: 7934
Member Name: MILLER Position: CLERK
Institution: 10 Department: ACCOUNTING
Salary: $1,300.00 Commission:
Annual Fee: $1,300.00 Monthly Fee: $108.33
14 rows selected.null -
BUG: Info panel displays incorrect Hue values
Recently, I've been doing a lot of work with color in Fireworks and came across the following bug, which appears to be a longstanding issue within the application. Rather than keeping it to myself, I figured I'd post it here in addition to submitting a bug report with Adobe. So here it is...
Hue values displayed within the Info panel (in HSB mode) do not consistently match the values displayed in the Color Mixer panel—including basic colors such as pure Yellow, Cyan, and Magenta. The values are 1 degree off—most often below the Color Mixer value, but sometimes above (as with Magenta). This holds true whether using with the Eyedropper tool or the Color Picker swatches eyedropper, and whether sampling from the canvas or from swatches.
For example, the following inconsistencies were observed when sampling the centermost horizontal strip within CS6's default Color Cubes swatches picker. Note that over 50% of these colors are affected by the issue.
The Color Mixer seems to display the correct values, while the Info panel's values appear to be incorrect. Note that this issue affects the HSB mode only; the RGB and Hex values are consistent between both panels.
This bug has been observed in Fireworks CS6, Fireworks CS5.1 and Fireworks 8 on Mac OS 10.6.8 (Snow Leopard).
Here's the bug report submitted for this issue:
Product name: Fireworks
Product Version: 12.0.0.236
Product Language: English
Your operating system: Mac OS 10.6.8 (Intel-based)
******BUG******
Concise problem statement: The Info panel displays incorrect Hue values for many colors—including pure Yellow, Cyan, and Magenta. The Hue values are usually 1 degree below the value displayed in the Color Mixer panel (e.g., 59 instead of 60 for Yellow) but sometimes 1 degree above (e.g., 301 instead of 300 for Magenta). This is true whether using the Eyedropper tool or the Color Picker swatches eyedropper, and whether sampling from the canvas or from swatches.
Steps to reproduce bug:
In an open Fireworks document, open the Info, Color Mixer, and Swatches panels. Within the Color Mixer and Info panels, set the color mode to HSB.
Draw a Rectangle and set its fill to Yellow (#FFFF00) using the Color Picker.
Observe the Hue values displayed in the Color Mixer and Info panels.
Select the Eyedropper (I) tool, and sample the rectangle's fill color. Again, observe the Hue values displayed in both the Color Mixer and Info panels.
Results: In both steps 3 and 4, the Hue value for pure Yellow (#ffff00) appears as 60 degrees in the Color Mixer panel but 59 degrees in the Info panel.
Expected results: The Hue for pure Yellow (#ffff00) should appear as 60 degrees in both panels.
Note that this issue affects the Info panel's HSB mode only; the RGB and Hex values are consistent between panels. Also note that this bug affects over 50% of the "pure" hues within CS6's Color Cubes swatches palette. For more info, see the following forum post:
http://forums.adobe.com/thread/1083391
This bug has been observed in Fireworks CS6, CS5.1 and FW8 on Mac OS 10.6.8 (Snow Leopard).I haven't done anything other than add my footage to the timeline. I have 2 layers (1 targa seq and 1 png seq). As I move my mouse from the Timeline to the Comp Panel, the color values flash for a split second and go away. If I press Opt+1 (2, 3, and 4) the Info Panel displays the color for that one pixel but the values go blank as soon as I move my mouse. This happens in the Comp Panel mostly. If I open a Footage or Layer Panel, sometimes the values show, sometimes not. Never had this issue in previous versions.
-
Passing radio button values to the backing bean
Hi all,
I need help with passing group of radio button values to a backing bean. I have page which has a dataTable to display a list of alerts. For each alert there are two radio buttons (YES & No) to indicate whether the email option for each alert is set or not. Now when i change the radio buttons and click on a submit button i should be able to pass these radio button values into action method in which i need to update the alerts. This is my code
<h:form>
<t:dataTable id="sub"
var = "alert"
value =#{subscriberBean.alertsList}">
<t:column>
<h:outputText value="#{alert.name}" />
</t:column>
<t:column>
<h:selectOneRadio id="subscriptions" value="#{alert.sendEmail}">
<f:selectItem id="item1" itemLabel="Yes" itemValue="0" />
<f:selectItem id="item2" itemLabel="No" itemValue="1" />
</h:selectOneRadio>
</t:column>
<t:dataTable>
<h:commandButton id="button1" value="Save changes" actionListener="#{subscriberBean.updateAlert}" />
</h:form>
{code}
I tried to to do something like below and get the updated list in the action event in the backing bean but it didn't work.
{code}
<h:commandButton id="button1" value="Save changes" actionListener="#{subscriberBean.updateAlert}" >
<f:attribute name="alerts" value="#{subscriberBean.alertsList}"/>
</h:commandButton>
// Backing Bean
public void updateAlert(ActionEvent e){
List<Alert updateList = (List<Alert>)event.getComponent().
getAttributes().get("alerts");
{code}
Can someone advise how to get these update radio button values in my actionListener method.The value the user selected will be written to the sendEmail property of the managed bean named alert. We know this because you set the value attribute to #{alert.sendEmail}. So simply access the managed bean in your action method.
-
Display the output in horizontally insted of vertical as per date
hi
experts
display the output in horizontally insted of vertical as per date.
Date : From .......... To .............
work center yeild to confrorm date
W1 288 1.4.2009
256 3.4.2009
Eg
workcenter date : 01.04.2009 2.04.2009 3.04.2009 4.04.2009 .......................
W1 288 256
w2 234 345 345Hi,
Incase you have to display this in an ALV; then your internal table will be dynamic.
Your internal table will consists of following fields
Work Centre
Date1
Date2
DateN
The date columns will not be of type d but rather character as in this columns you have to store the workcentres in them.
Create your dynamic internal table using the class CL_ALV_TABLE_CREATE and method CREATE_DYNAMIC_TABLE.
You will have to create a fieldcatalog table and pass to the method.
Then use the dynamic internal table created to store your data horizintally against each date column.
Display the output in an ALV.
Pass the date values as the description for each date column in the ALV.
I hope you get the concept.
Regards,
Ankur Parab
Edited by: Ankur Parab on Jun 23, 2009 4:24 PM -
Have to Display Transfer orders in horizontal format in script outputlayout
Hi,
I had a problem, I have to display Transfer Orders in Horizontal format in Script Out put layout.
For this i need a logic for displaying in horizontal way..
Can you suggest anything ?
Thanks a lot .....Hi ,
Example think that each Transfer order have different values and this form is displaying all this details in single layout..
If I have different Transfer order in internal table it displaying in form as:
1) Transfer order 3) Transfer order
2) Transfer order 4) Transfer order
But i need the out put as given below..
1) Transfer order 2) Transfer order
3) Transfer order 4) Transfer order
So kindly suggest me....
thanking you.......... -
How to display Radio buttons with default selection on
Hi
I want to display Radio buttons using jsf
i have done it using
<h:dataTable id="apartmentList" value="#{userBean.allApartmentList}"
var="apartments">
<h:column>
<h:selectOneRadio id="selectedApartment" onclick="javascript:setSelectedApartment(this);">
<f:selectItem itemValue="#{apartments.apartmentVO.apartmentId}" />
</h:selectOneRadio>
</h:column>
inside a data table
now when i click some page i want to display the radio's with default radio button selected
also when i select one radio button and click on some command button
eg:<h:commandButton action="#{userBean.setSelectedApartment}"
the Radio button's Selection should not disappear
i have written a javaScript
function setSelectedApartment(oRadio)
oForm = oRadio.form;
elems=oForm.elements;
for(iIndex=0;iIndex<elems.length;iIndex++)
if(elems[iIndex].type == 'radio')
if(elems[iIndex].name != oRadio.name)
elems[iIndex].checked=false;
document.getElementById("apartmentListForm:selectedApartmentId").value=oRadio.value;
To check which Raio button is Selected
How do i show the Default Selected button and How the selection should not disappear
Can any one suggest me links or the solution to this problem
Thank you
Geetanjalee-set the value binding expression of select items to a request scope bean
- on the page load event() ,do
setdefaultval("ur default value")
so each time on the page load it sets the default value. and you can get selected value by getdefaultval()
--raju -
<p>I have four groupings, Domain, Area, Priority (3rd level of grrouoping) and then Problem ID. Priority group could have values such as '1', '2', '3', '4' and '5' with corresponding "average" age formula on these group level. values.</p><p>Example: 1 Avg Age= 30</p><p> 2 Avg Age= 45</p><p> 3 Avg Age= 69</p><p>Reguirement: Display group name values and their corresponding average formula on a single line/row.</p><p>Sample Solution: Priority 1 = 30, Priority 2 = 45, Priority 3 = 69 </p><p> ***solution above should be displayed/concatenated on one line.</p><p>Your help is greatly appreciated, thank you in advance.</p>
So right now - your report looks like this
GroupHeader 1
GroupHeader 2
Priority 1 = 50 (actual display of Group 3)
Priority 2 = 75 (actual display of Group 3)
Priority 3 = 45 (actual display of Group 3)
Priority 4 = 9 (actual display of Group 3)
Priority 5 = 8 (actual display of Group 3)
And you want to change that so that it displays horizontally.
If there will only ever be 5 priorities, I think I would cheat the system a bit. Create a formula that runs at the group 3 level and dumps the values into 5 separate variables (formula below).
Then create 5 separate display formulas and put them in Group Footer 2 (if you already have a GF2 - then create a second one and move it above your current GF2). Suppress the G3 section and you should be close to what you are after (unless you also have detail sections, then we'll need to revisit).
This could also be accomplished with a multi-column subreport at the G2 or G3 level if you need more flexibility.
formula *******
numbervar priority1;
numbervar priority2;
numbervar priority3;
numbervar priority4;
numbervar priority5;
if {DB.Priority} = 1 then priority1:= {@avgGroupPriorityAvgAge}
else if {DB.Priority} = 2 then priority2:= {@avgGroupPriorityAvgAge}
else if {DB.Priority} = 3 then priority3:= {@avgGroupPriorityAvgAge}
else if {DB.Priority} = 4 then priority4:= {@avgGroupPriorityAvgAge}
else if {DB.Priority} = 5 then priority5:= {@avgGroupPriorityAvgAge} -
Not to display the null values from data base
Hiiii.
In a jsp file i have ten check boxes.The jsp file is mapped to a servlet file for parameter requesting and to
store it in DB.
The unchecked box values has null values.All the values are store in a Mysql DB table.
Again i have to display it in a jsp page from table.
The problem am facing was,how can i display only the values in a row.it must not display the null values and the crresponding column name.
Or any other way is their like below
How i can retrieve only the selected check boxes from tht jsp file.and store in backend.
Thanks in Advance
regards,
satheesh kannanHere is a rough example that may give you some ideas:
On the JSP page:
<%if(myData.getFirstName()!=null){%>
Your First Name'
<input type="text" name="firstName" value="<%=myData.getFirstName()%>">
<%}%>
In the servlet:
String firstName= request.getParameter("firstName");
if(firstName!=null){
//write it to the database
} -
Need to display the Stock Values at storage location level - 0IC_C03
Hi All,
I am developing Stock Movent Report on 0IC_C03 - Material Stocks/Movements.
I have more than one storage location for plant. Stock quantities are calculating at storage location level and Stock Values are calculating at plant level.
I have no issues with quantities. Only problem with Values.
2LIS_03_UM is not picking the starage location, so that the revaualtion values are falling under unassigned nodes. When i set filter on storage location these values were not showing as they are under un assigned nodes (#).
I want to get the Stock Quantity and Stock Values at Storage location level in my report.
I found that soulution for that is Applying SAP Note : How to Realize summarized display of stock values on storage
I have done development as per the document. But when i run the Query it is going to debug mode first and then it saying This program cannot display the webpage
Can any one faced the same situation, Please help me if so.
Thanks in Advance.
Gopal NHi Sachein,
I am getting this An exception(CX_RSR_PROPAGATE_X) occured when debugging, and then it leads to next screen saying that:
This program cannot display the webpage
Most likely causes:
You are not connected to the Internet.
The website is encountering problems.
There might be a typing error in the address.
What you can try:
Check your Internet connection. Try visiting another website to make sure you are connected.
Retype the address.
Go back to the previous page.
More information
Please let me know you need any more information.
Thanks in Advance
Gopal N -
How to display the sort value in the selection screen in the report title
Dear All,
How to display the sort value in the selection screen in the report title? I have selected a value in the selection screen for sorting , but i need that values by which i have sorted with in the report title. Can you please throw some light on this!!
Good day,
Thanks and regards
Arun SHi Arun,
Try this.
1, Set one dynamic parameter,
2, Drag and drop that parameter into your report title.
3, Pass the value(sort value) dynamically from your application,
4, Cheers..
Other wise Try with Dataset, create a dataset and fill thev alue into that.. Then set the data source from CR designer. and darg and drop that data column into the report.
Hope this will work,
Regards,
Salah
Edited by: salahudheen muhammed on Mar 25, 2009 11:13 AM -
Search bar value from Interactive Report
Could someone help me to acces the value entered in the search bar and pass it to another page?
Basically our apex interactive reports has a link which allows to edit single records. However customer is looking to edit multiple records at the same time and I am thinking if I can pass the search bar value to an tabular form, then it will allow to update multiple records
Thanks
Rajesh AlexHi Rajesh,
There are a set of views that seem to contain the data for the IR:
APEX_APPLICATION_PAGE_IR
APEX_APPLICATION_PAGE_IR_CAT
APEX_APPLICATION_PAGE_IR_CGRPS
APEX_APPLICATION_PAGE_IR_COL
APEX_APPLICATION_PAGE_IR_COND
APEX_APPLICATION_PAGE_IR_RPT
You could have a look through these to see if any help.
Andy -
How to display first row value returened from a query as checked as default in a report
How to display first row value returned from a query as checked as default in a report
Example
Parameter 1
Paramerter2
ABD
x(checked)
Test
DEF
JMG
MudassarHi Mudassar,
The issue is caused by the order in which the parameters appear in the report data tab can be difference between our report execution and it failing. In other words, “Parameter2” is execution before parameter “A” due to this issue. We can adjust the parameter’s
order to solve the issue.
If “Parameter2” is parameter “A”, we cannot use that expression. Because fields cannot be used in report parameter expression, if we want to display the first value returned from a query as default value, we have to fill the “Specify values” text box with
the specific value in Default Values dialog box.
Regards,
Alisa Tang
Alisa Tang
TechNet Community Support -
Display of missing values in a table view.
Hi everyone,
I have a table view with 7 columns and 10 rows which displays only those values which are missing in the DataBase Table.
Is it possible to show only the missing values as '-' in a table view, the table view is having 7 different fields.
Also when the value is inserted at run time the corresponding field should be updated accordingly and the value will no longer be displayed in the table view as '-'
please advice.
Regards
Neo.Welcome to SDN.
do you mean to say that in some rows some column values will be blank and you want to replace the blanks with '-'.
loop thru the itab which you are passing to tableview and for the blank cells pass '-'.
<i>Also when the value is inserted at run time</i>
so you are having editable tableview. to update the value back to the dbtable, you have to read it in oninputprocessing and update it to dbtable .
search the forum on how to read the user entered value from the table view so that you can update the dbtable.
Regards
Raja -
How to prevent a text in script from displaying if its value is zero
Dear all,
How to prevent a text in script from displaying if its value is zero
for eg Price = 0.00
if price is 0 it should'nt appear in output.
I tried with if price ne 0.
price = &price&
endif.
but it's not working.
Regards
Raj
<MOVED BY MODERATOR TO THE CORRECT FORUM>
Edited by: Alvaro Tejada Galindo on Jan 20, 2009 8:59 AMHello Nagaraju,
What you were doing is partially right.
The correct format to write in the script is as follows :
/: if &PRICE& ne 0.
&PRICE&
/: endif.
This should work. Let me know how it goes.
Nayan
Maybe you are looking for
-
Itunes 9 on a NAS for Windows and Mac
I have read dozens of posts here but cannot find the answer so hoping to get this cleared up once and for all. I have a NeadyNAS NV+ where my "My Music" folder exists. The NAS has a Firefly iTunes server I have a Win7 desktop, Vista laptop and two Ma
-
Ive done everything possible on my Mac computer, like safe mode. reinstalling. etc. But nothing seems to work it just stays on the grey screen with an apple logo and the loading circle. Please can any one help me with this problem?
-
The function AirDrop on my Mac BookAir seems not to work, not detect my iPad. How to fix this?
-
Which is better the newer shared video ram Imacs or the 2008 versions with dedicated 256 chip?
-
Iphoto, note, notewriter, all close unexpectedly and can't open the app program
Just had my computer less than 10 days... I have problem opening up iphoto, note and notewriter...all close unexpectedly and can't open these app. What cause this problem and how to fix it?