Display setting for KF wants to see -ve values as (KF)

Hi,
By defalut for a key figure  this is the setting for "Sign Change: Select whether +/- signs are to be kept or reversed. When a sign is reversed, a positive number is given a minus sign (for example, 85 becomes -85) and a negative number is given a plus sign (for example, -38 becomes +38)". But I want to have it in excel way where -ve KF is depicted by brackets.
Any idea how to do it?
Need help.

Goto Query Properties. In the Display Tab you can see an option of displaying the negative value as ().
Use this setting.

Similar Messages

  • Value is displayed as -* for some cells though it has value

    Hello
    I have one report in which I am displaying amount for each cost center
    (Hierarchy has been activated for cost center)
    In report, for some cells it is displaying correct values for amount but for some cells it is displaying -*
    but when I select on the same cell then I can see value for that cell in formula bar, but -* in the cell
    hope I am clear
    Please suggest any way to display values in all of the cells
    Thanks & Regards

    Hi,
    You need to use currency conversion.
    If you dont find a standard convertion formula available then you need to write your code for converting all currencies to INR.
    Also check other SDN posts for currency conversion.
    You are bound to find something.
    I hope this would resolve your problem.
    Thanks,
    Kartik

  • Want to see constant value of CPU not the aggregated one from the cube?

    Hi All,
    When I see my layout with fiscyear ,it shows the aggregated values for Quantity,Cost Per Unit,0Amount,which is distributed across period.
    For example if one WBS and one uear(2008) -0Quantity(12),CPU(100) to four periods of one fiscyear.The distribution would be as shown below:- 
    Period       0Quantity      CPU            0Amount
    003.2008         3               100              300
    004.2008         3               100              300
    005.2008         3               100              300
    0006.2008       3               100              300
    Total               12               400            1200
    So in my layout I'll be able to see :-
    fiscyear        0Quantity           CPU         0Amount.
    2008                12                  400            1200
    So 12 * 400 <> 1200 which is logically incorrect.
    Is there any way by which we can get the constant or average value of CPU from the cube???
    Any help would be appreciated.
    Rgds,
    Indu

    Hi Indu,
    If you are using Query designer for generating report, you can have this property...In the properties of CPU>Calculate result as...>Average value...
    This will give you the result as average of all the values.
    Assign points if this helps u...
    Regards,
    KK.

  • How to change the Display Pattern for Decimal Fields dynamically

    hi all,
    Can any one help me how to change the display pattern for decimal fields dynamically???
    Currently I am using z,zzz,zzz,zz9.999 Display pattern for Quantity Field. If the value is blank it is displaying as 0.000 on the Screen. But I don't want this to be printed.
    Please help me how to solve this ASAP.
    Thanks,
    Prabhu

    Hi,
    Alternatively you can handle it in the context.
    In the context area, click on the quantity. In the bottom, click on the conditions tab, and put a condition
    <quan field> NE initial.
    So the field will not be printed if there is no value.
    Regards,
    Vidya Chowdhary A.

  • I want to see the LDAP set up for EP 6.0 sp2

    Hi,
    I want to see the LDAP set up for EP 6.0 sp2.
    And also the see the entries under portal and corporate LDAP.
    Kindly let me know at the earliest.
    Swetha

    Are you talking about datasource of EP or LDAP connectors?

  • HT5953 I only want to see / search for books in English how do it set that up

    I only want to see / search for books in English how do it set that up

    Mikey ...
    Click the round flag icon bottom right corner of the App Store window. In the next window select United States.
    For purchases, your credit or debit card credentials must be associated with the same country where you reside.
    "Although you can browse the iTunes Store in any country without being signed in, you can only purchase content from the iTunes Store for your own country. This is enforced via the billing address associated with your credit card or other payment method that you use with the iTunes Store, rather than your actual geographic location."
    From here >  The Complete Guide to Using the iTunes Store | iLounge Article
    The iTunes and Mac App Store are one in the same.
    iTunes Store: Which types of items can I buy in my country?
    edited by:  cs

  • Note Board web part to display comments for explicit Document Set

    I guess my question falls under 'Other customization' hence my post here.
    Scenario:
    I have a Document Set content type enabled for a library. At the moment I have a few "folders" [document sets] that contain their respective documents.
    I edited a Document Set welcome page to include a Note Board web part. I edited the Note Board web part by adding a 'URL for note' to be a URL of a random Document Set welcome page while in edit mode.
    (Basically, I went to a 'ABC' document set page, clicked edit page, copied URL from address bar, closed that page, went to 'Customize Welcome Page' for all document sets in that library, edited Note Board web part by pasting the link into its 'URL for note'
    field) 
    Problem:
    Currently, all comments are shared between all document sets (folders). When I go to 'ABC' document set and post a comment, I can see my ABC specific comments in e.g. 'XYZ' document set.
    I want to have comments specific to each document set displayed on a respective page for that document set.
    Solution?
    I realize that I must have gotten an URL for a Note Board web part wrong and it does not filter comments explicit to each document set but fetches the comments from whole the library. My url is currently:
    https://intranet.domain/sitecollection/library/Forms/Machine%20Process%20Pack/docsethomepage.aspx?ID=2&FolderCTID=0x0120D520009EDF2E3A3112B041AC6EC1D4133D77550000C297D6CB32E349A435E04924DC6C58&List=7b052f9c-7e35-4251-b66d-3bcdd2950014&RootFolder=%2Fuk%5Fqhse%2FProcess%20Packs%2FSigma%202345&RecSrc=%2Fuk%5Fqhse%2FProcess%20Packs%2FSigma%202345&PageView=Shared&InitialTabId=Ribbon.WebPartPage&Visi
    I know I have to strip this URL from some parameters, presumably leaving just ID, FolderCTID, List and RootFolder.
    Could someone actually tell me exactly how my URL should look like if I want to display comments only for a given document set on its welcome page?
    Thanks!

    Hi,
    According to your post, my understanding is that you wanted to display comments only for a given document set on its welcome page, not display for all the document sets.
    If so, you should not set the “URL for note” field in the Note Board web part, you can just leave it blank, then when you post a comment in one document set, the others would not display the comment.
    Thanks & Regards,
    Jason
    Jason Guo
    TechNet Community Support

  • I don't want to have to ZOOM every site i visit, how do i save my zoom setting for all sites?

    i don't want to have to ZOOM every site i visit, how do i save my zoom setting for all sites?

    ''how do i save my zoom setting for all sites? not for each site I visit''
    That would be be impossible unless you did away entirely with page formatting entirely. Each author may have their own idea of what you should be seeing and how you are to see it. By site which is the default is about the best that you can do.
    If you have a serious problem you could change the resolution of your display, but it had better be a very large monitor.
    '''NoSquint''', adjust the text-only and full-page (both text and images) zoom levels as well as color settings both globally (for all sites) and per site. Toolbar buttons, percent displays on status bar.
    * https://addons.mozilla.org/firefox/addon/2592
    '''Zoom text of web pages'''
    * http://kb.mozillazine.org/Zoom_text_of_web_pages
    <br><small>Please mark "Solved" one answer that will best help others with a similar problem -- hope this was it.</small>

  • I have an issue installing photoshop CC trial, I currently have elements and wanted to see the differences before buying, when installing through the creative cloud app I get the error message  Exit Code: 7 Please see specific errors below for troubleshoo

    I have an issue installing photoshop CC trial, I currently have elements and wanted to see the differences before buying, when installing through the creative cloud app I get the error message  Exit Code: 7 Please see specific errors below for troubleshooting. For example,  ERROR: DW041 ...   -------------------------------------- Summary --------------------------------------   - 0 fatal error(s), 1 error(s)
    ERROR: DW041: INSTALLDIR Volume D:\ doesn't exist.  -------------------------------------------------------------------------------------  System Requirements  and it will not install, It says cant find the path D: im not sure why because as far as I can see its set to install on drive C: which is where I want it!

    Exit Code: 6, Exit Code: 7 Installation Errors - http://helpx.adobe.com/creative-suite/kb/errors-exit-code-6-exit.html
    Troubleshoot with install logs | CS5, CS5.5, CS6 - http://helpx.adobe.com/creative-suite/kb/troubleshoot-install-logs-cs5-cs5.html for information on how to review your installation logs

  • How to set up display properties for a crosstab is CSS?

    I am woundring how to setup css class and code like in this tutorial.
    myalerting.css ?
    Set up display properties for a crosstab: Design Studio 1.2 - YouTube.
    Design Studio 1.2: Set up display properties for a crosstab
    if you have sample file please share I am sure other can be befits from as well.
    I would like to use color display on numbers or icons in seperate column if the value in certain range  or a value is below or avove business needs.
    Thanks.

    Kevin,
    I could not get this to work on my installation; perhaps you can review and "run with it" or someone better with CSS can assist.
    The gist of it is there is a class .sapzencrosstab-DataCellDefault.sapzencrosstab-DataCellAlert1Background to define the status symbol for the alerts
    Based on your Exceptions in the BEx query, Good 1 is .sapzencrosstab-DataCellDefault.sapzencrosstab-DataCellAlert1Background
    Good 2 is .sapzencrosstab-DataCellDefault.sapzencrosstab-DataCellAlert3Background
    etc... Bad 3 (red symbol) is .sapzencrosstab-DataCellDefault.sapzencrosstab-DataCellAlert9Background
    I tried the following custom CSS on the crosstab, note using IE (which now we can no longer use until Microsoft patches)
    myAlerting.sapzencrosstab-DataCellDefault.sapzencrosstab-DataCellAlternating{
    background-color:#F9F9F9 !important;
    myAlerting.sapzencrosstab-DataCellDefault{
    background-color:#FFFFFF !important;
    myAlerting.sapzencrosstab-DataCellDefault.sapzencrosstab-DataCellAlert1Background
    color:rgba(0,0,0,0.0);
    background-image: url('/aad/resources/~1398612272195~/sap/zen/crosstab/themes/sap_platinum/img/exceptions/status_1.gif') !important;
    background-repeat:no-repeat !important;
    background-position:center top !important;
    myAlerting.sapzencrosstab-DataCellDefault.sapzencrosstab-DataCellAlert2Background
    color:rgba(0,0,0,0.0);
    background-image: url('/aad/resources/~1398612272195~/sap/zen/crosstab/themes/sap_platinum/img/exceptions/status_2.gif') !important;
    background-repeat:no-repeat !important;
    background-position:center top !important;
    myAlerting.sapzencrosstab-DataCellDefault.sapzencrosstab-DataCellAlert3Background
    color:rgba(0,0,0,0.0);
    background-image:url('green.png');
    background-repeat:no-repeat !important;
    background-position:center top !important;
    myAlerting.sapzencrosstab-DataCellDefault.sapzencrosstab-DataCellAlert9StatusSymbol
    color:rgba(0,0,0,0.0);
    background-image: url('aad/resources/~1398612272195~/sap/zen/crosstab/themes/sap_platinum/img/exceptions/status_9.gif') !important;
    background-repeat:no-repeat !important;
    background-position:center top !important;
    I didn't want to hold you up and for sure I hope there is someone in the community who could help.  I'll try again when we can use IE

  • What is the proper display default setting for a MacBook 13''?

    Hi, I clicked on system preferences from the little blue apple and then clicked on Display because I was wanted to increase my screens brightness. Before I clicked anything else however, the screen blinked and blacked out and then came back up with large black lines on each side and the screen was scrunched up. Thinking I maybe accidentally changed the resolution, I clicked on the one below it - which increased the size of everything! Now everything is all messed up and even though I've got it fitting almost back to normal - the font and words seem blurry.
    What did I do wrong and what is the right (default) setting? I just want my display to look normal again! Thanks for everyone's help.

    With the Macbook 13", turn the resolution as high as it can go, millions of colors, refresh rate n/a. This was the default with my machine, and it's working fine.

  • In Keynote09, if i set custom presenter display settings (large presenter notes), and i save the file, will i see my notes in the same way on another computer? Are the presenter display setting saved in the file?

    In Keynote09, if i set custom presenter display settings (large presenter notes), and i save the file, will i see my notes in the same way on another computer?
    Are the presenter display setting saved in the file?
    Thanks for your help!

    it wont.
    Presenter note display is set per machine.
    Surprising nobody in this community knew this.

  • Setting Display Name for sent emails

    Hi All,
    I want to set a display name for sent emails. For example: when I send emails using [email protected] and after receivign this amil in my inbox it says from [email protected] Is there any way that I can show display name for this like Kartik <[email protected]>.
    is there any API by which I can set this display name? Or this has to be done on mail server?
    Any help would be appreciated!!
    Thanks, Kartik

    it asks for a attribute messageFrom and passes it to SMTPTransport. I have tried setting different values for messageFrom like
    messageFrom=Test Email
    messageFrom="Test Email"
    but it didn't work for me. it expects a domain name there (even if its dummy) like
    messageFrom=[email protected]
    Can you tell me at which place InternetAddress is been called by SMTPTransport so that I can write my own impl for it.

  • Set display size for headless Mac Mini?

    Hello.
    I want to set the display on my Mac Mini (headless, control via ARD) to a widescreen setting, but since no monitor is attached, it doesn't give me the option for a widescreen display.
    Any ideas how to force it to a widescreen display setting?
    Thanks,
    Kristin.

    I found that online : http://www.macvroom.com/node/39
    And I've used it once to set a mac mini to automatically switch to a non-standard resolution to display properly on some sort of strange flat-screen tv.
    If you find additional info, please post for reference, can always be useful.
    Cedric

  • HT4110 What is the best battery setting for the MacBook Pro 13 Retina display?

    I want to know the best setting for the battery for the MacBook Pro 13 Retina display.

    To add just a little
    Keep it plugged in when near a socket so you keep the charging cycles down on your LiPo (lithium polymer) cells / battery, but not plugged in all the time. When not being used for several hours, turn it off.
    And best "tip" is if its near a socket,...plug it in as long as you can (especially at home) since cycle count on the battery are the "miles that wear out the tires (battery)", however again, not plugged in all or most of the time.
    http://www.apple.com/batteries/notebooks.html
    "Apple does not recommend leaving your portable plugged in all the time."
    General rule to remember of Lithium batteries is:
    Never drain them LOW  & dont always/often store them HIGH
    While cycle count is commonly seen to be the “miles” on your Lithium Ion pack cell in your Macbook, which they are, this distinction is not a fine line at all, and it is a big misconception to “count charge cycles”
    *A person who has, for example, 300 charge cycles on their battery and is recharging at say 50-60% remaining of a 100% charge has better battery usage and care than another person who has 300 charge cycles at say 15% remaining on a 100% charge. 
    DoD (depth of discharge) is far more important on the wear and tear on your Macbook battery than any mere charge cycle count.  *There is no set “mile” or wear from a charge cycle in general OR in specific.    As such, contrary to popular conception, counting cycles is not conclusive whatsoever, rather the amount of deep DoD on an averaged scale of its use and charging conditions.
                              (as a very rough analogy would be 20,000 hard miles put on a car vs. 80,000 good miles being something similar)
    *Contrary to some myths out there, there is protection circuitry in your Macbook and therefore you cannot overcharge it when plugged in and already fully charged
    *However if you don’t plan on using it for a few hours, turn it OFF (plugged in or otherwise) ..*You don’t want your Macbook both always plugged in AND in sleep mode       (When portable devices are charging and in the on or sleep position, the current that is drawn through the device is called the parasitic load and will alter the dynamics of charge cycle. Battery manufacturers advise against parasitic loading because it induces mini-cycles.)
    Keeping batteries connected to a charger ensures that periodic "top-ups" do very minor but continuous damage to individual cells, hence Apples recommendation above:   “Apple does not recommend leaving your portable plugged in all the time”, …this is because “Li-ion degrades fastest at high state-of-charge”.
                        This is also the same reason new Apple notebooks are packaged with 50% charges and not 100%.
    LiPo (lithium polymer, same as in your Macbook) batteries do not need conditioning. However...
    A lot of battery experts call the use of Lithium cells the "80% Rule" ...meaning use 80% of the charge or so, then recharge them for longer overall life.
    Never let your Macbook go into shutdown and safe mode from loss of power, you can corrupt files that way, and the batteries do not like it.
    The only quantified abuse seen to Lithium cells are instances when often the cells are repeatedly drained very low…. key word being "often"
    Contrary to what some might say, Lithium batteries have an "ideal" break in period. First ten cycles or so, don't discharge down past 40% of the battery's capacity. Same way you don’t take a new car out and speed and rev the engine hard first 100 or so miles.
    Proper treatment is still important. Just because LiPo batteries don’t need conditioning in general, does NOT mean they dont have an ideal use / recharge environment. Anything can be abused even if it doesn’t need conditioning.
    From Apple on batteries:
    http://support.apple.com/kb/HT1446
    http://www.apple.com/batteries/
    Storing your MacBook
    If you are going to store your MacBook away for an extended period of time, keep it in a cool location (room temperature roughly 22° C or about 72° F). Make certain you have at least a 50% charge on the internal battery of your Macbook if you plan on storing it away for a few months; recharge your battery to 50% or so every six months roughly if being stored away. If you live in a humid environment, keep your Macbook stored in its zippered case to prevent infiltration of humidity on the internals of your Macbook which could lead to corrosion.
    Considerations:
    Your battery is subject to chemical aging even if not in use. A Lithium battery is aging as soon as its made, regardless.
    In a perfect (although impractical) situation, your lithium battery is best idealized swinging back and forth between 20 and 85% SOC (state of charge) roughly.
    Further still how you discharge the battery is far more important than how it is either charged or stored short term, and more important long term that cycle counts.
    Ultimately counting charge cycles is of little importance.  Abuse in discharging (foremost), charging, and storing the battery and how it affects battery chemistry is important and not the ‘odometer’ reading, or cycle counts on the battery. 
    Everything boils down to battery chemistry long term, and not an arbitrary number, or cycle count.
    Keep your macbook plugged in when near a socket since in the near end of long-term life, this is beneficial to the battery.
    Peace

Maybe you are looking for