Display the output of a Report in the Screen of a Module Pool

Hi All,
Im Trying to display the report output in a Custom Screen. I hope it is possible through OOPS ABAP. Can any one give me some example program?
Thanks,
Saravanan Rajan

Re: ALV display using oops
ALV OOPS

Similar Messages

F4 help for the screen fields in module pool program

Hi All,
I have a requirement that, i want to provide F4 help for the 2 fields in module pool program. the fields are document number and fiscal year from rbkp table.
i could provide search help for two fields.
but how to select matching fiscal year for that document number.
problem: i am getting fiscal year as first four digits of document number.
please help me to solve this problem.
Thanks & Regards,
Namratha.V

Hi,
If your requirement is after selecting the document no from f4 help then the corresponding year should be updated in the document year field then use FM --> DYNP_VALUES_UPDATE
In this function module pass the screen no program & field for which u want to update value

How can i display the success msg using module pool

Hi frnds,
I want to display the error mesg or success msg in a dialogbox with ok button through module pool,
Pls help me any one.
Thanks in advance.

Hi,
Check this example in SAP:
DEMO_MESSAGES -
> This is a good example of displaying messages given by SAP.
For more information on messages please visit this link:
http://help.sap.com/saphelp_nw04/helpdata/en/91/dec863880411d194cb0000e8353423/content.htm
This will tell you the complete status of each messages in the ABAP with its displaying position on the screen.
May this information helps you.
Thanks
Deepak Sharma

While updating my ipad to new software through itunes it got stuck and does not work anymore - it just displays the screen with symbols of itunes and the cable to connect to it - help - what should i do?

while updating my ipad to new software through itunes it got stuck and does not work anymore - it just displays the screen with symbols of itunes and the cable to connect to it - help - what should i do?

Disconnect the iPad, do a Reset [Hold the Home and Sleep/Wake buttons down together for 10 seconds or so (until the Apple logo appears) and then release. The screen will go blank and then power ON again in the normal way.] It is 'appsolutely' safe!, reconnect and follow the prompts.
If that does not work then see here http://support.apple.com/kb/HT1808

Cannot display the screen of the macbook on TV. OS is Lion 10.7.2. Connection to the TV is over HDMI cable. TV shows only the backgroud picture of Lion. Do you have any suggestions for help ?

Cannot display the screen of my macbook on TV. OS is Lion 10.7.2. The Macbook is connected to the TV is over HDMI cable. TV shows only the backgroud picture of the Lion OS and reacts even to mission control. Do you have any suggestions for help ?

You have the display set in Extended Desktop mode. In System Preferences>Display on the MacBook screen there should be an Arrangement tab when you have the MacBook hooked up to the TV and both screens working. When you click the Arrangement tab do you see two monitors side by side? One of them will have a Menu Bar at the top. Just click on the Menu Bar and drag it to the second monitor. That will make the second monitor your main screen. You can now use your MacBook in Clamshell Mode with a wired or Bluetooth keyboard and mouse. http://support.apple.com/kb/HT3131 When you disconnect from the TV your Menu Bar will automatically change back to the MacBook.
Or if you want to work on the MacBook screen while showing it on a TV you can check the Mirror Display box on the lower left hand side of the Arrangement tab under the two monitors box.

Dear Sirs,when i use the computer updating my iphone to ios 7.1,suddenly black out.The computer has no power and my iphone does not work and keep display the screen that connect to itunes. so when i connect my iphone to iTunes, it says"itunes has detected

Dear Sirs,when i use the computer updating my iphone to ios 7.1,suddenly black out.The computer has no power and my iphone does not work and keep display the screen saying the iphone need to connect to itunes. So when i connect my iphone to iTunes, the computer says"itunes has detected an iphone in recovery mode. you must restore this iphone before it can be used with itunes"
So my question is if I click OK(restore the iphone),will i lose all my data and whatsapp??
Thank you for your help and time.
Regards,
hopeless

If you didn't back up the phone to iCloud or iTunes (on your computer) BEFORE attempting the update, the data will be lost.

How can i air display the Screen from mac to the more than 3 iPads?

how can i air display the Screen from mac to the more than 3 iPads?
thanks

Energy Saver, you can keep the computer awake while the screen saver shuts the monitor off but I'm not sure that would do it for you.

Hi everyone, my Iphone 3gs cannot display the screen item once you lock it and and you wanna unlock it back.

Hi everyone, my Iphone 3gs cannot display the screen item once you lock it and and you wanna unlock it back.

Since you are still under Warranty, make appointment with Apple Genius and take iPhone to Apple for resolution of those problems.

How to find the current line in the table control in module pool ?

How to find the current line in the table control in module pool ?
This is an urgent requirement? please do help me.

refer to this example
REPORT demo_dynpro_tabcont_loop_at.
CONTROLS flights TYPE TABLEVIEW USING SCREEN 100.
DATA: cols LIKE LINE OF flights-cols,
lines TYPE i.
DATA: ok_code TYPE sy-ucomm,
      save_ok TYPE sy-ucomm.
DATA: itab TYPE TABLE OF demo_conn.
      TABLES demo_conn.
SELECT * FROM spfli INTO CORRESPONDING FIELDS OF TABLE itab.
LOOP AT flights-cols INTO cols WHERE index GT 2.
cols-screen-input = '0'.
MODIFY flights-cols FROM cols INDEX sy-tabix.
ENDLOOP.
CALL SCREEN 100.
MODULE status_0100 OUTPUT.
SET PF-STATUS 'SCREEN_100'.
DESCRIBE TABLE itab LINES lines.
flights-lines = lines.
ENDMODULE.
MODULE cancel INPUT.
LEAVE PROGRAM.
ENDMODULE.
MODULE read_table_control INPUT.
MODIFY itab FROM demo_conn INDEX<b> flights-current_line.</b>
ENDMODULE.
MODULE user_command_0100 INPUT.
save_ok = ok_code.
CLEAR ok_code.
CASE save_ok.
    WHEN 'TOGGLE'.
      LOOP AT flights-cols INTO cols WHERE index GT 2.
        IF cols-screen-input = '0'.
          cols-screen-input = '1'.
        ELSEIF cols-screen-input = '1'.
          cols-screen-input = '0'.
      ENDIF.
MODIFY flights-cols FROM cols INDEX sy-tabix.
ENDLOOP.
    WHEN 'SORT_UP'.
      READ TABLE flights-cols INTO cols WITH KEY selected = 'X'.
      IF sy-subrc = 0.
        SORT itab STABLE BY (cols-screen-name+10) ASCENDING.
        cols-selected = ' '.
MODIFY flights-cols FROM cols INDEX sy-tabix.
      ENDIF.
    WHEN 'SORT_DOWN'.
      READ TABLE flights-cols INTO cols WITH KEY selected = 'X'.
      IF sy-subrc = 0.
        SORT itab STABLE BY (cols-screen-name+10) DESCENDING.
        cols-selected = ' '.
MODIFY flights-cols FROM cols INDEX sy-tabix.
      ENDIF.
    WHEN 'DELETE'.
      READ TABLE flights-cols INTO cols
                              WITH KEY screen-input = '1'.
      IF sy-subrc = 0.
        LOOP AT itab INTO demo_conn WHERE mark = 'X'.
          DELETE itab.
ENDLOOP.
      ENDIF.
ENDCASE.
ENDMODULE.

How to get the Grand Total in Module pool Screen

Hi Frds.
     How to get the Grand Total in Module pool Screen
Example i have 10 different materials
for each matarial has different moving . But in my case matarials is doesnt matter here
10 material Moving Average price to do Frand total and display in one column...
Please Help me out Frds.
Regards,
Kabil

Hi
You need to calculate the total in a module of PAI (or PBO) event:
PROCESS PAI.
   LOOP.....
   ENDLOOP.
MODULE CALCULATE_TOTAL.
MODULE CALCULATE_TOTAL.
    GRAND_TOTAL = 0.
     LOOP AT ITAB,
        GRAND_TOTAL = GRAND_TOTAL + ITAB-PWB.
    ENDLOOP.
ENDMODULE.
In this way the grand total will be calculated as soon as the user presses enter or another command.
You can't insert the calculation in the loop of table control, because this loop runs the visible lines only, so it's better to calculate the total out of those loop,

How to delete a column from the table control in module pool?

Hi,
can any one please tell How to delete a column from the table control in module pool?
thanks in advance
warm regards
HareeshKumar N

hi hareesh,
I think it is better to hide it.
How to hide: You can check this link
Dynamic Hide column in table control

How to display the screen in negative?

Hi,
Is it possible to easily toggle the display of the screen in negative?
Someone showed to me that with a Mac he can do that with one shortcut and now I’m jealous, I want the same on my Arch
My graphics card is a Nvidia (proprietary driver) and I use LXDE with OpenBox, but I don’t really know at which level I have to search.
Thank you

You might be able to do this with one of the fancier windows managers (compiz perhaps).
http://www.google.com/search?hl=en&rls= … =&aql=&oq=

Pavilion g6 updated to windows 8.1 now tv won't display the screen

I cracked the screen of my HP Pavilion g6, so I usually connect it through HDMI to my Coby TV and it usually worked fine. Now, after updating to Windows 8.1, my TV won't display anything. I believe it is because the screen is black, and my TV never displayed a black screen before, it only showed the screen once the laptop has started up. I've tried pressing f4 and i can see that the screen is blue in the small area of my screen that still works, but it still isn't showing through my TV so I don't know how I can fix this problem because I cannot see the screen. Please help!

Hi ke11ie,
Welcome to the HP Forums!
I would like to take a moment and thank you for using the forum, it is a great place to find answers. For you to have the best experience in the HP forum, I would like to direct your attention to the HP Forums Guide First Time Here? Learn How to Post and More.
I understand that after upgrading to Windows 8.1 your external display(CobyTV) is not working. Just to rule out the TV if you connect to a different display does it work?
Here is a link to Connecting a Monitor, Projector or TV (Windows 8).
Here is a link to Display Quality Issues, that may also be of aid.
I hope this helps.
Sparkles1
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the bottom right to say “Thanks” for helping!

Can I wirelessly display the screen of my 15 inch retina Macbook Pro to a Thunderbolt display ?

Can I wirelessly display (like via bluetooth) the screen of my 15 inch, late 2013, Retina Macbook Pro, to a thunderbolt display ?

They can fix it, but not for free. Macbook repairs supposedly are classified into 3 tiers by an Apple Rep, I for least amount of damage and III for most. I have a dent in the corner of my MBP and it would require new housing to get it fixed. $450 (tier I) or ~half the cost of a Macbook Air on education discount... HA.
If it doesn't affect your everyday computing, I wouldn't worry about it. It's awful, but welcome to the club

On my Cinema Display the screen is blurry and shifts with mouse movement.

I have had this screen for a year and a half and only use it once a week in my remote office. This morning I noticed blurring on the screen and the whole screen shifts up/down, left/right with mouse movement. Please help. I am getting a headache.
Thanks In Advance,
Rob

Press Command-Option-8 once or twice.
You have Zoom on. It is controlled in "Seeing" in "Universal Access" system preference, and by Control-Scrollwheel.

Display the output of a Report in the Screen of a Module Pool

Similar Messages

Maybe you are looking for