Display tileset on clicking on the choiselist control

Hi
I have a choicelist control.
On clicking on that choicelist control i want to dislay another tile set
Plz let me know what to do.
Thanks and regards
namita

Hi Namita,
You need to create a hyperlink using mobile application studio, where in you will specify your source and target tiles, also you have to specify what data is being exchanged.
Next step is to code event of a dialog box such as "OnSelect" wherein you can program the execution of hyperlink.
Best Regards,
Pratik Patel
Reward with points if it is of any use to you!

Similar Messages

Display Inbox when clicking on the root level of a mailbox?

I want the contents of the Inbox to display in the right hand pane, whenever I click on on the root of a mailbox/account. (without showing the Email, Accounts, Advanced Features splash screen - ever. Is there a way to configure Thunderbird to behave like this? I notice that Postbox does behave the way I want by default.

I suggest you use Postbox. Thunderbird will not be replacing the settings screen with the inbox. It will be having an updated display on that screen with much more detailed and useful information. But it will not be replaced.
This add-on is the proposed change. https://addons.mozilla.org/en-US/thunderbird/addon/mail-summaries/?src=ss

I have several tabs open and firefox suddenly stopped displaying when I clicked on the taskbar icon. I am running windows 7, no idea of FF ver as it will not display. Rebooting pc does not help. Any ideas?

Just noticed that I can open FF in a new window but cannot get to any tabs already opened in the other window. The first time I experienced a problem was when I opened one tab too many. I guess it was over 20 tabs open at once, but have now only 8-10 open.
Just remembered, it could have happened after yahoo installed itself on the toolbar, then as a menu item. I declined this every time it asked to install, but it went ahead and I cannot remove it now.

My scroll also doesn't work in Firefox -- but does in Excel and Word. This has been intermittent for months now. Usually, if I reboot the scroll would begin working again until for no apparent reason it quits again. Now even the reboot doesn't fix the no-scroll problem. I have Windows Vista. I even did a Firefox Update to 9.0.1.
I don't have that file on my about:config page so this solution won't work for me.
Thanks in advance for any help!

Data is not being displayed into DataGridview until Clicked inside the cells

Hi,
On a windows form, I have a DataGridView, its columns are auto-generated every time. Data is loaded after the user click a data-load button. However this is NOT working well, the data is not displayed until manually clicked inside the grid cells. The following
is the code. Could you please help? Thanks!
private void ButtonTestGrid_Click(object sender, EventArgs e)
 for (int i = 0; i < 10; i++)
 this.MainDataGrid.Columns.Add(TestHelper.CreateTextBoxColumn("Col" + i.ToString(), 120));
 Dictionary<string, object>[] data;
 data = TestHelper.CreateTestData();
 this.MainDataGrid.EndEdit();
 TestHelper.LoadGridData(this.MainDataGrid, data);
 this.MainDataGrid.Refresh();
public class TestHelper
 public static DataGridViewTextBoxColumn CreateTextBoxColumn(string name, int width)
 DataGridViewTextBoxColumn column = new DataGridViewTextBoxColumn();
 column.HeaderText = name;
 column.Name = name;
 column.ReadOnly = false;
 column.Width = width;
 return column;
 public static void LoadGridData(System.Windows.Forms.DataGridView grid, Dictionary<string, object>[] data)
 int index;
 foreach (Dictionary<string, object> row in data)
 index = grid.Rows.Add();
 LoadRowData(grid, index, row);
 public static void LoadRowData(System.Windows.Forms.DataGridView grid, int index, Dictionary<string, object> data)
 string name;
 for (int i = 0; i < grid.Columns.Count; i++)
 name = grid.Columns[i].Name;
 if (data.ContainsKey(name))
 grid.Rows[index].Cells[name].Value = data[name];
 public static Dictionary<string, object>[] CreateTestData()
 Dictionary<string, object>[] dataList = new Dictionary<string, object>[5];
 Dictionary<string, object> data;
 for (int j = 0; j < 5; j++)
 data = new Dictionary<string, object>();
 for (int i = 0; i < 10; i++)
 data.Add("Col" + i.ToString(), i);
 dataList[j] = data;
 return dataList;

There are different ways to bind the datagridview control to it's datasource, the question is where and what is your datasource? Is it from a database or XML file, or is it built on runtime...etc?
Based on your explanation I can understand that the Datagridview is binding correctly in the code behind since the rows of the grid are created. Because the row of the Datagridview are created only while it is binded correctly to it's datasource. The issue
of the display seems something different and strange.
Try also this way by using DataTable one the common ways used:
static DataTable GetTable()
// Here we create a DataTable with four columns.
DataTable table = new DataTable();
table.Columns.Add("Dosage", typeof(int));
table.Columns.Add("Drug", typeof(string));
table.Columns.Add("Patient", typeof(string));
table.Columns.Add("Date", typeof(DateTime));
// Here we add five DataRows.
table.Rows.Add(25, "Indocin", "David", DateTime.Now);
table.Rows.Add(50, "Enebrel", "Sam", DateTime.Now);
table.Rows.Add(10, "Hydralazine", "Christoff", DateTime.Now);
table.Rows.Add(21, "Combivent", "Janet", DateTime.Now);
table.Rows.Add(100, "Dilantin", "Melanie", DateTime.Now);
return table;
Then to bind the above Datatable to the grid control:
this.MainGrid.DataSource = null;//To clear before bind
this.MainGrid.DataSource = GetTable();
Fouad Roumieh

2002 G3 600 mhz iMac display stays dim with an unidentified sign displayed. The contrast control does not work.

My display screen is dim and the contrast control does not work. There is a sign on the screen that I have been unable to identify. It is a white circle outline with a half moon solid circle within it. Does anyone know what's wrong?

There is a sign on the screen that I have been unable to identify. It is a white circle outline with a half moon solid circle within it
That would be a screen contrast symbol
My display screen is dim and the contrast control does not work.
Did you reset the PRAM? http://support.apple.com/kb/ht1379 And the pram battery may need to be replaced if it is over 3 years old it is under the iMac under the ram cover and there is a little button in there to reset the pmu as well. you have to have it pluged in when you do a pmu reset. there is a lot more stuff to try before the worst case scenario that is a bad PAV board the Pav is what runs the monitor and if it is going bad That may be a syptom that it is haveing and they can not be fixed (Well not for under $250 and that is useing old parts because they do not make them any more) but that wood be worst case scenario. Lets just hope it just needs to be reset Try that and Keep us posted

"an error occurred saving the activex control"

I'm trying to compile an executable in Labview 5.1. When I run the build app, it gets about half way done then pops up the error:
"an error occurred saving the activex control"
After clearing the error message, it proceeds to go through the motions of compling the app, but no exe is generated.
The design mode progam run operates fine, and it saves fine as well in design mode.
Thanks!

wawatts,
Though Brian and I got a broken arrow because we didn't have the necessary ActiveX component installed, I imagine you get no errors on the development system because you do have the component.
This problem would be much harder to pin down on your side given the lack of development-environment errors and the sprawling design of the main VI. One possible troubleshooting approach would be the LabVIEW Find functionality (Edit >> Find). ActiveX functionality typically involves the use of Property Nodes and Invoke Nodes, so if you search for any Invoke Nodes (Select Object, then Functions >> Communication >> ActiveX >> Invoke Node) in the scope of your main VI and its subVIs, you could perhaps have turned up some hits that take you to the subVI that has the control that is presumably causing the problem.
Unfortunately, I fear that finding the problem area doesn't solve the problem. It seems to me that either the LabVIEW app builder or the ActiveX component is doing something unexpected or nonstandard that is leading to the error message.
I'm going to stick to my "upgrade the software as much as possible" guns:
1. Install the LabVIEW 5.1.1 patch I linked to above, if it isn't already installed. There were fixes to the development environment and changes to the app builder that might resolve your problem. This is a free patch.
2. Consider upgrading the ActiveX control. I think that the latest version is called IntuiLink for 54600-series Oscilloscopes, Version 3.1, and it's available here on the Agilent site.
It was easy to do a simple test using your Xezgetsetup.vi on my system (LabVIEW 7.1.1, XP) with the updated ActiveX control. First, I installed the Agilent software. Then, I right-clicked inside the ActiveX control on the front panel of Xezgetsetup.vi, chose Insert ActiveX Object, and selected Agilent 54600 Scope Control from the list. Then I had to go to the block diagram and relink a few of the property and invoke nodes by just left-clicking on broken nodes and re-selecting the items that your code was already displaying. That fixed the VI so that it would run again.
Then I built that VI into an EXE and got no errors.
Perhaps all this proves is that you would have clear sailing if you upgraded to LabVIEW 7.1 and got the most recent Agilent ActiveX control--and maybe this is a good reason to bite the bullet and do that upgrade now--but it's certainly possible that you can do the same thing in 5.1 and solve your problem. Worth a shot.
Hope that helps,
John

Can't figure out how to turn the Sharing control back on in iTunes

Recently, I have begun using Limewire to download music. A few days ago a message came up on my computer that said something like "The Sharing Control on your iTunes playlist has been turned off".I can't figure out how to turn it back on, and I have done everything.Please, someone help!
eMachines Windows XP

Well, there could be one of two problems, your Itunes sharing could be turned off, or your limewire sharing could be turned off.
To fix it in iTunes:
Click Edit
Choose preferences
Click on the parental controls tab
Uncheck the box that says "Disable Shared Libraries"
To fix it in Limewire:
Find the options window
On the left side there should be an options for iTunes
Click on the arrow and one should allow you to automatically share with iTunes

How can labview update the string control (text-edit box) after we have pressed the carriage return key on the keyboard during text-editing within that box?

Dear readers,
I have been trying to work out how to get labview to detect the event when a 'string' control has been modified, where the user has finished editing the string either by 1) pressing the enter key on the keyboard, or by 2) taking the focus away from the string control again. For example.. if I use the mouse to click on the string control and then I type 1234 into the box, I would like to have a routine that does something once the user hits the Enter key of the keyboard, or when the user takes the focus away from the string control again by clicking on something else. I would like the routine to respond even when the user didn't change anything in the text box (such as when we mouse-click on the edit box to go into edit mode, and then mouse-click on something else to remove the focus with no changes to the contents in edit-box).
The purpose of my routine is to have a edit-box for a user to change for example the centre-frequency of a vector network analyser, so that the centre-frequency of the network analyser can change once the user finishes entering a new value in the text-edit box by hitting Enter key after the number is keyed in. Even if the user has clicked on the edit box, but changes their mind by mouse-clicking on something else to remove focus from the edit box, I would still like labview to detect the event when the control loses focus, so that the centre frequency can be updated anyway (to the same value that was already in the edit box).
So far, I've tried set the string control option to 'limit to single line', so that I can try to scan for a carriage return .. '\n' ... pattern in the string. Unfortunately this doesn't work because labview doesn't seem to attach the '\n' to the end of that single line.
Could someone please suggest ways to set a flag when a user hits Enter during text-edit mode of a string control, or when focus has been removed from the string control?
While I've only described my problem for controlling a single control parameter on the gpib device, I'd like to make this feature work so that I can do the same kind of thing with other control parameters as well.
Thanks so much in advance.
Kenny

Hi Kenny,
instead of using the event structure, you can directly achieve to what you want by the KeyFocus property of the string control.
- Enable Limit to single line option
- Create the property KeyFocus in read mode and connect an indicator
Each time you click on the string to modify it KeyFocus is True; when you click away or hit Enter KeyFocus is False.
You can toggle your settings when KeyFocus changes from True to False.
Alberto

How to change a setting in the Java Control Panel with command line

Hi,
I am trying to figure out how to change a setting in the Java Control Panel with command line or with a script. I want to enable "Use SSL 2.0 compatible ClientHello format"
I can't seem to find any documentation on how to change settings in the Java Control Panel via the command line
Edited by: 897133 on Nov 14, 2011 7:15 AM

OK figured it out. This is for the next person seeking the same solution.
When you click on the Java Control Panel (found in the Control panel) in any version of Windows, it first looks for a System Wide Java Configuration (found here: C:\Windows\Sun\Java\Deployment). At this point you must be wondering why you don't have this folder (C:\Windows\Sun\Java\Deployment) or why its empty. Well, for an enterprise environment, you have to create it and place something in it - it doesn't exist by default. So you'll need a script (I used Autoit) to create the directory structure and place the the two files into it. The two files are "deployment.properties" and "deployment.config".
Example: When you click on the Java Control Panel it first checks to see if this directory exists (C:\Windows\Sun\Java\Deployment) and then checks if there is a "deployment.config". If there is one it opens it and reads it. If it doesn't exist, Java creates user settings found here C:\Users\USERNAME\AppData\LocalLow\Sun\Java\Deployment on Windows 7.
__deployment.config__
It should look like this inside:
*#deployment.config*
*#Mon Nov 14 13:06:38 AST 2011*
*# The First line below specifies if this config is mandatory which is simple enough*
*# The second line just tells Java where to the properties of your Java Configuration*
*# NOTE: These java settings will be applied to each user file and will overwrite existing ones*
deployment.system.config.mandatory=True
deployment.system.config=file\:C\:/WINDOWS/Sun/Java/Deployment/deployment.properties
If you look in C:\Users\USERNAME\AppData\LocalLow\Sun\Java\Deployment on Windows 7 for example you will find "deployment.properties". You can use this as your default example and add your settings to it.
How?
Easy. If you want to add *"Use SSL 2.0 compatible ClientHello format"*
Add this line:
deployment.security.SSLv2Hello=true
Maybe you want to disable Java update (which is a big problem for enterprises)
Add these lines:
deployment.javaws.autodownload=NEVER
deployment.javaws.autodownload.locked=
Below is a basic AutoIt script you could use (It compiles the files into the executable. When you compile the script the two Java files must be in the directory you specify in the FileInstall line, which can be anything you choose. It will also create your directory structure):
#NoTrayIcon
#RequireAdmin
#Region ;**** Directives created by AutoIt3Wrapper_GUI ****
#AutoIt3Wrapper_UseX64=n
#EndRegion ;**** Directives created by AutoIt3Wrapper_GUI ****
Func _JavaConfig()
     $ConfigFile_1 = @TempDir & "\deployment.properties"
     $ConfigFile_2 = @TempDir & "\deployment.config"
     FileInstall ("D:\My Documents\Autoit\Java config\deployment.properties", $ConfigFile_1)
FileInstall ("D:\My Documents\Autoit\Java config\deployment.config", $ConfigFile_2)
     FileCopy($ConfigFile_1, @WindowsDir & "\Sun\Java\Deployment\", 9)
     FileCopy($ConfigFile_2, @WindowsDir & "\Sun\Java\Deployment\", 9)
     Sleep(10000)
     FileDelete(@TempDir & "\deployment.properties")
     FileDelete(@TempDir & "\deployment.config")
EndFunc
_JavaConfig()
Now if you have SCUP and have setup Self Cert for your organization, you just need to create a SCUP update for JRE.
Edited by: 897133 on Nov 16, 2011 4:53 AM

In Organizer my media pics will not display. When i import the pics are displayed until i try to display another file and then they are gone???

I am lost....i recently upgraded to PSE 12 and my files all show imported but i cannot display any pics.

Click on the top View menu and ensure you have all the media types selected to show.

Module pool ---Problem in finding the line index for the table control

Hi Friends,
I am working in Module pool programming.
My requirement is when i select any record on the lead selection I need to find out the index of the line on which row i have selected.
Could any one please suggest me the proper solution how to get the line index for the table control in module pool programming.
Thanks
Satish Raju

Hi Raju,
Follow the steps
<li>U should take one variable in your internal table or in structure which is used for table control fields.
 DATA :BEGIN OF itab OCCURS 0 ,
 mark TYPE c ,
 matnr LIKE mara-matnr ,
 matkl LIKE mara-matkl,
 maktx LIKE makt-maktx,
 END OF itab .
 controls: tabc types tableview using screen 100.
<li>This mark variable should be given in Table control properties. follow the path
double click on the table control-->attributes .->select w/SelColumn and in that give itab-mark.
<li>Flow logic of the screen
 process before output.
 MODULE status_0100.
 LOOP AT itab with control tabc
 endloop.
 process after input.
 module cancel at exit-command.
 LOOP AT itab.
 MODULE read_table_control.
 ENDLOOP.
 MODULE user_command_0100.
<li>read_table_control module code
 MODULE read_table_control INPUT.
 MODIFY itab INDEX tabc-current_line."this will update the itab table
 "mark field with 'X ' whatever we
 "have selected on table control
 ENDMODULE.
<li>If you want to Delete some of the records from Table control follow this code u2026Create one pushbutton and give Fucnction code to that and write below code
 CASE okcode.
 WHEN 'DELETE'.
 LOOP AT itab WHERE mark = 'X'.
 DELETE itab.
 ENDLOOP.
 ENDCASE.
I hope that it helps you.
Thanks
Venkat.O

I can't see epub in two pages, the option control 2 is turn off

If I click on the option control+1, I can see the epub in one page; but, if I want to see it again in two pages, I can't! The option control+2 is on grey (like it was turn off). Can anybody help me? Thanks!

Who can help me?

In Security, clicking on the "Saved Password" button displays your current saved password for each site. It does not allow you to change a password. How would you do that?

In Security, clicking on the "Saved Password" button displays your current saved password for each site. It only allows you to view and delete site passwords. It does not allow you to change a password. How would you do that?

If you enter a new password Firefox should offer to change the password.
*You may not need to delete the old password. Try "Refreshing" the page, entering the site again, you may need to let Firefox fill in the old password, then enter the new password, and Firefox should ask to save the new password. See:
**http://kb.mozillazine.org/Deleting_autocomplete_entries
*If you delete the old password, you may need to "Refresh" the site after deleting the old password.
If you want to delete the password that has been saved do the following:
#In the Tools menu select Options to open the options window
#Go to the Security panel
#Click the "Saved Passwords" button to open the passwords manager
#Select the site in the list, then click Remove
 
 
'''You need to update the following.''' The Plugin version(s) shown below was/were submitted with your question and is/are out of date. You should update to avoid known security issues with the version(s) you have installed. Click on "More system info..." to the right of your question to see what was included with your question.
*Adobe PDF Plug-In For Firefox and Netscape 8.3.0 (''Note: this is a very old version and installing the current version may not delete it or overwrite it. To avoid possible problems with having 2 versions installed on your system, you may want to remove the old version in Windows Control Panel > Add or Remove Programs before installing the new version'').
*Shockwave Flash 10.3 r181 (''this may be current but a new version was released on 2011-06-14 with a ".26" after the "181". You can use the Plugin Check below and/or look in Add-ons > Plugins for the version of Shockwave Flash that you have installed. The newest version will be shown in Add-ons > Plugins as "Shockwave Flash 10.3.181.26"'').
*Next Generation Java Plug-in 1.6.0_24 for Mozilla browsers
#'''''Check your plugin versions''''' on either of the following links':
#*http://www.mozilla.com/en-US/plugincheck/
#*https://www-trunk.stage.mozilla.com/en-US/plugincheck/
#*'''Note: plugin check page does not have information on all plugin versions'''
#*There are plugin specific testing links available from this page:
#**http://kb.mozillazine.org/Testing_plugins
#'''Update Adobe Reader (PDF plugin):'''
#*From within your existing Adobe Reader ('''if you have it already installed'''):
#**Open the Adobe Reader program from your Programs list
#**Click Help > Check for Updates
#**Follow the prompts for updating
#**If this method works for you, skip the "Download complete installer" section below and proceed to "After the installation" below
#*Download complete installer ('''if you do NOT have Adobe Reader installed'''):
#**SAVE the installer to your hard drive (save to your Desktop so that you can find it after the download). Exit/Close Firefox. Run the installer you just downloaded.
#**Use either of the links below:
#***https://support.mozilla.com/en-US/kb/Using+the+Adobe+Reader+plugin+with+Firefox ''(click on "Installing and updating Adobe Reader")''
#***''Also see Download link''': http://get.adobe.com/reader/otherversions/
#*After the installation, start Firefox and check your version again.
#'''Update the [[Managing the Flash plugin|Flash]] plugin''' to the latest version.
#*Download and SAVE to your Desktop so you can find the installer later
#*If you do not have the current version, click on the "Player Download Center" link on the "'''Download and information'''" or "'''Download Manual installers'''" below
#*After download is complete, exit Firefox
#*Click on the installer you just downloaded and install
#**Windows 7 and Vista: may need to right-click the installer and choose "Run as Administrator"
#*Start Firefox and check your version again or test the installation by going back to the download link below
#*'''Download and information''': http://www.adobe.com/software/flash/about/
#**Use Firefox to go to the above site to update the Firefox plugin (will also install plugin for most other browsers; except IE)
#**Use IE to go to the above site to update the IE ActiveX
#*'''Download Manual installers'''.
#**http://kb2.adobe.com/cps/191/tn_19166.html#main_ManualInstaller
#**Note separate links for:
#***Plugin for Firefox and most other browsers
#***ActiveX for IE
#'''Update the [[Java]] plugin''' to the latest version.
#*Download site: http://www.oracle.com/technetwork/java/javase/downloads/index.html (Java Platform: Download JRE)
#**'''''Be sure to un-check the Yahoo Toolbar option during the install if you do not want it installed.
#*Also see "Manual Update" in this article to update from the Java Control Panel in Windows Control Panel: http://support.mozilla.com/en-US/kb/Using+the+Java+plugin+with+Firefox#Updates
#* Removing old versions (if needed): http://www.java.com/en/download/faq/remove_olderversions.xml
#* Remove multiple Java Console extensions (if needed): http://kb.mozillazine.org/Firefox_:_FAQs_:_Install_Java#Multiple_Java_Console_extensions
#*Java Test: http://www.java.com/en/download/help/testvm.xml

Displaying Date types in the grid control

I have a grid control and one of the column is displaying
'Date' type data. I am able to see the Date values in the grid, if
I define the return type of the getter function as String format.
But the problem with this is, when I click on the Date column
header, the grid is sorting the rows while treating the Date values
as String values. And when I change the return type of the getter
method as Date type (java.util.Date), I don't see any Date values
in the grid. Do I need to do any additional coding to display the
date values as Date types to display the data and then to be able
to sort the grid on Date types.
Please help.

You should return Date values to the Flex application and
store them in the dataProvider associated with that DataGrid. For
Date-values you have a couple of choices:
1. Actually store the time (a long Number - milliseconds
since Jan 1970) and use a labelFunction on the column to format
that values as a Date. This way sorting will treat the value as a
number, but it will appear as a Date.
2. Write your own Sort compare method for that column. Check
the docs on Sort and SortField.

Problem in handling double click in the second alv grid control

Hi all,
I have a screen. In the screen , I have 2 custom container and each custom container has 1 alv grid control.
I need to handle double click event for both of alv grid controls in my screen.
I defined 2 local event handler class for each alv grid and defined 2 handle_double_click event.
In the first Alv grid double click works fine , everything is ok, world is peaceful.
But in the second alvgrid, the row parameters (E_ROW, E_COLUMN, ES_ROW_NO) comes initial so i cannot handle it.
All i need is to call a different transaction (displaying the equipment-IE03) when user double-click on a field in the second alv grid control. I tried to use hotspot_click event too but it does'nt give the row id either.
I read some posts in the forms ([Double click event of alv grid control|Double click event of alv grid control]).
I tried everything but nothing works.
Please help. Your answers will be appreciated.

Hello Eagle
I am not sure where the problem lies in your case but sample report ZUS_SDN_THREE_ALV_GRIDS_01 shows that you can always find out the current cell after the double-click event (in any case you have the current cell already as IMPORTING parameters of the event):
*& Report ZUS_SDN_THREE_ALV_GRIDS_01
*& Flow logic of screen '0100' (no screen elements, ok-code => GD_OKCODE):
** PROCESS BEFORE OUTPUT.
** MODULE STATUS_0100.
** PROCESS AFTER INPUT.
** MODULE USER_COMMAND_0100.
*& Thread: problem in handling double click in the second alv grid control
*& <a class="jive_macro jive_macro_thread" href="" __jive_macro_name="thread" modifiedtitle="true" __default_attr="1172052"></a>
REPORT zus_sdn_three_alv_grids_01.
DATA:
gd_okcode TYPE ui_func,
gd_repid TYPE syst-repid,
go_docking TYPE REF TO cl_gui_docking_container,
go_splitter TYPE REF TO cl_gui_splitter_container,
go_splitter_2 TYPE REF TO cl_gui_splitter_container,
go_cell_top TYPE REF TO cl_gui_container,
go_cell_bottom TYPE REF TO cl_gui_container,
go_cell_left TYPE REF TO cl_gui_container,
go_cell_right TYPE REF TO cl_gui_container,
go_grid1 TYPE REF TO cl_gui_alv_grid,
go_grid2 TYPE REF TO cl_gui_alv_grid,
go_grid3 TYPE REF TO cl_gui_alv_grid.
DATA:
gt_outtab TYPE STANDARD TABLE OF vbak,
gt_outtab_2 TYPE STANDARD TABLE OF vbap,
gt_outtab_3 TYPE STANDARD TABLE OF vbep.
**PARAMETERS:
** p_bukrs TYPE bukrs DEFAULT '1000'.
* CLASS lcl_eventhandler DEFINITION
CLASS lcl_eventhandler DEFINITION.
PUBLIC SECTION.
 CLASS-DATA:
 ms_row TYPE lvc_s_row,
 ms_col TYPE lvc_s_col.
 CLASS-METHODS:
 handle_double_click FOR EVENT double_click OF cl_gui_alv_grid
 IMPORTING
 e_row
 e_column
 es_row_no
 sender.
ENDCLASS. "lcl_eventhandler DEFINITION
* CLASS lcl_eventhandler IMPLEMENTATION
CLASS lcl_eventhandler IMPLEMENTATION.
METHOD handle_double_click.
* define local data
 DATA:
 ls_outtab TYPE vbak,
 ls_outtab_2 TYPE vbap,
 ls_outtab_3 TYPE vbep.
 " Initialize class data
 CLEAR: ms_row,
 ms_col.
 CASE sender.
 WHEN go_grid1.
 ms_row = e_row.
 ms_col = e_column.
* Triggers PAI of the dynpro with the specified ok-code
 CALL METHOD cl_gui_cfw=>set_new_ok_code
 EXPORTING
 new_code = 'GET_ITEMS'
* IMPORTING
* rc =
 WHEN go_grid2.
 ms_row = e_row.
 ms_col = e_column.
* Triggers PAI of the dynpro with the specified ok-code
 CALL METHOD cl_gui_cfw=>set_new_ok_code
 EXPORTING
 new_code = 'GET_SCHEDULE_LINES'
* IMPORTING
* rc =
 WHEN go_grid3.
** READ TABLE gt_vbap INTO ls_vbap INDEX e_row-index.
** CHECK ( ls_vbap-matnr IS NOT INITIAL ).
** SET PARAMETER ID 'MAT' FIELD ls_vbap-matnr.
** CALL TRANSACTION 'MM02' AND SKIP FIRST SCREEN.
 WHEN OTHERS.
 RETURN.
 ENDCASE.
ENDMETHOD. "handle_double_click
ENDCLASS. "lcl_eventhandler IMPLEMENTATION
START-OF-SELECTION.
SELECT * FROM vbak INTO TABLE gt_outtab UP TO 100 ROWS.
PERFORM init_controls.
* Display data
CALL METHOD go_grid1->set_table_for_first_display
 EXPORTING
 i_structure_name = 'VBAK'
 CHANGING
 it_outtab = gt_outtab
 EXCEPTIONS
 OTHERS = 4.
IF sy-subrc NE 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
* WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
REFRESH: gt_outtab_2.
CALL METHOD go_grid2->set_table_for_first_display
 EXPORTING
 i_structure_name = 'VBAP'
 CHANGING
 it_outtab = gt_outtab_2 " empty !!!
 EXCEPTIONS
 OTHERS = 4.
IF sy-subrc NE 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
* WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
REFRESH: gt_outtab_3.
CALL METHOD go_grid3->set_table_for_first_display
 EXPORTING
 i_structure_name = 'VBEP'
 CHANGING
 it_outtab = gt_outtab_3 " empty !!!
 EXCEPTIONS
 OTHERS = 4.
IF sy-subrc NE 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
* WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
* Link the docking container to the target dynpro
gd_repid = syst-repid.
CALL METHOD go_docking->link
 EXPORTING
 repid = gd_repid
 dynnr = '0100'
* CONTAINER =
 EXCEPTIONS
 OTHERS = 4.
IF sy-subrc NE 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
* WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
* NOTE: dynpro does not contain any elements
CALL SCREEN '0100'.
* Flow logic of dynpro:
*PROCESS BEFORE OUTPUT.
* MODULE STATUS_0100.
*PROCESS AFTER INPUT.
* MODULE USER_COMMAND_0100.
END-OF-SELECTION.
*& Module STATUS_0100 OUTPUT
* text
MODULE status_0100 OUTPUT.
SET PF-STATUS 'STATUS_0100'. " contains push button "ORDERS"
* SET TITLEBAR 'xxx'.
* Refresh display of detail ALV list
CALL METHOD go_grid2->refresh_table_display
* EXPORTING
* IS_STABLE =
* I_SOFT_REFRESH =
 EXCEPTIONS
 OTHERS = 2.
IF sy-subrc NE 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
* WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
* Refresh display of detail ALV list
CALL METHOD go_grid3->refresh_table_display
* EXPORTING
* IS_STABLE =
* I_SOFT_REFRESH =
 EXCEPTIONS
 OTHERS = 2.
IF sy-subrc NE 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
* WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
ENDMODULE. " STATUS_0100 OUTPUT
*& Module USER_COMMAND_0100 INPUT
* text
MODULE user_command_0100 INPUT.
CASE gd_okcode.
 WHEN 'BACK' OR
 'END' OR
 'CANC'.
 SET SCREEN 0. LEAVE SCREEN.
 " Double-click on first or second ALV grid
 WHEN 'GET_ITEMS' OR
 'GET_SCHEDULE_LINES'.
 PERFORM get_details.
 WHEN OTHERS.
ENDCASE.
CLEAR: gd_okcode.
ENDMODULE. " USER_COMMAND_0100 INPUT
*& Form INIT_CONTROLS
* text
* --> p1 text
* <-- p2 text
FORM init_controls .
* Create docking container
CREATE OBJECT go_docking
 EXPORTING
 parent = cl_gui_container=>screen0
 ratio = 90
 EXCEPTIONS
 OTHERS = 6.
IF sy-subrc NE 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
* WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
* Create splitter container
CREATE OBJECT go_splitter
 EXPORTING
 parent = go_docking
 rows = 1
 columns = 2
* NO_AUTODEF_PROGID_DYNNR =
* NAME =
 EXCEPTIONS
 cntl_error = 1
 cntl_system_error = 2
 OTHERS = 3.
IF sy-subrc NE 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
* WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
* Get cell container
CALL METHOD go_splitter->get_container
 EXPORTING
 row = 1
 column = 1
 RECEIVING
 container = go_cell_left.
CALL METHOD go_splitter->get_container
 EXPORTING
 row = 1
 column = 2
 RECEIVING
 container = go_cell_right.
* Create 2nd splitter container
CREATE OBJECT go_splitter_2
 EXPORTING
 parent = go_cell_left
 rows = 2
 columns = 1
* NO_AUTODEF_PROGID_DYNNR =
* NAME =
 EXCEPTIONS
 cntl_error = 1
 cntl_system_error = 2
 OTHERS = 3.
IF sy-subrc NE 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
* WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
* Get cell container
CALL METHOD go_splitter_2->get_container
 EXPORTING
 row = 1
 column = 1
 RECEIVING
 container = go_cell_top.
CALL METHOD go_splitter_2->get_container
 EXPORTING
 row = 2
 column = 1
 RECEIVING
 container = go_cell_bottom.
* Create ALV grids
CREATE OBJECT go_grid1
 EXPORTING
 i_parent = go_cell_top
 EXCEPTIONS
 OTHERS = 5.
IF sy-subrc NE 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
* WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
CREATE OBJECT go_grid2
 EXPORTING
 i_parent = go_cell_bottom
 EXCEPTIONS
 OTHERS = 5.
IF sy-subrc NE 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
* WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
CREATE OBJECT go_grid3
 EXPORTING
 i_parent = go_cell_right
 EXCEPTIONS
 OTHERS = 5.
IF sy-subrc NE 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
* WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
* Set event handler
SET HANDLER: lcl_eventhandler=>handle_double_click FOR go_grid1.
SET HANDLER: lcl_eventhandler=>handle_double_click FOR go_grid2.
SET HANDLER: lcl_eventhandler=>handle_double_click FOR go_grid3.
ENDFORM. " INIT_CONTROLS
*& Form GET_DETAILS
* text
* --> p1 text
* <-- p2 text
FORM get_details .
* define local data
DATA: ls_row TYPE lvc_s_row,
 ls_col TYPE lvc_s_col.
data: ls_outtab type vbak,
 ls_outtab_2 type vbap,
 ls_outtab_3 type vbep.
BREAK-POINT.
CASE gd_okcode.
 WHEN 'GET_ITEMS'.
 CALL METHOD go_grid1->get_current_cell
 IMPORTING
* e_row =
* e_value =
* e_col =
 es_row_id = ls_row
 es_col_id = ls_col
* es_row_no =
 read TABLE gt_outtab into ls_outtab index ls_row-index.
 refresh: gt_outtab_2,
 gt_outtab_3.
 SELECT * FROM vbap into TABLE gt_outtab_2
 WHERE vbeln = ls_outtab-vbeln.
 WHEN 'GET_SCHEDULE_LINES'.
 CALL METHOD go_grid2->get_current_cell
 IMPORTING
* e_row =
* e_value =
* e_col =
 es_row_id = ls_row
 es_col_id = ls_col
* es_row_no =
 READ TABLE gt_outtab_2 into ls_outtab_2 index ls_row-index.
 refresh: gt_outtab_3.
 SELECT * FROM vbep into TABLE gt_outtab_3
 WHERE vbeln = ls_outtab_2-vbeln
 AND posnr = ls_outtab_2-posnr.
 WHEN OTHERS.
 RETURN.
ENDCASE.
IF ( lcl_eventhandler=>ms_row = ls_row AND
 lcl_eventhandler=>ms_col = ls_col ).
 MESSAGE 'Current cell identical' TYPE 'I'.
ELSE.
 MESSAGE 'Current cell NOT identical' TYPE 'I'.
ENDIF.
ENDFORM. " GET_DETAILS
Regards
Uwe

Display tileset on clicking on the choiselist control

Similar Messages

Maybe you are looking for