Displaying all of an edited clip?

I have a project that has mostly short (~1 minute) clips. However, there is a ten minute clip in it. I did quite a lot of editing in that 10 minute clip so that now it's only 20 seconds.
Now I want to get the whole 10 minute clip back, but retain all the rest of the edits that were made to the project. Is there a way to do that simply?
Thanks for any assistance.

When you edit clips, you do so NON-DESTRUCTIVELY.  Meaning the original file is unchanged.
This is how editing normally works:
- Capture/Import footage into FCP.  Store it in the Browser.
- Load the clip into the VIEWER. 
- Locate the part of the clip you want to use in the sequence.
- Mark IN and OUT.
- Edit it into the sequence (there are about a dozen ways to do this)
- Load a new clip into the Viewer, or mark IN and OUT on a different section of your clip, and add that to the sequence.
Now...the original file is UNTOUCHED...it is the same.  Load it from the Browser...there it is...full length.  Even if you edit this way:
- Capture/Import footage into FCP.  Store it in the Browser.
- Drag the entire clip onto the timeline.
- Cut out the stuff you DON'T want...leaving you with an edited sequence.
Again...if you load the clip from the BROWSER into the Viewer...there it is, full sized.  Or, if you park your playhead on the clip in the sequence, and press the "F" key, the full clip will load into the VIEWER, with IN and OUT points marked that represent the clip in the timeline.  BUT, the full clip is there.
Does none of this work for you? 

Similar Messages

  • Can Multiclip Feature  Display All Clips Simultaneously In Final Video?

    I want to use the multiclip feature not only to cut from one angle to another, but also to display all the 4 angles simultaneously on occasions.
    I know I can display 4 tracks by stacking them and using the Motion sliders to cut each one down to a quarter of the screen size, but it would be a lot quicker and easier if there were a method of doing it within the multiclip setup.
    I have scoured the manual to no avail. So is there a magic command that will automatically do what I want or am I seeking the impossible?

    Yep, Muticlip is there for a specific purpose and is not an "effect" that you can apply .. but there are plenty of plugins that'll give you exactly the effect you want:
    PieroF's (free) Quarter PIP: http://web.me.com/piero.fiorani/PieroFFCE_Effect/QuarterPIP.html
    Crumple Pop's (new) Split Screen: http://toolfarm.stores.yahoo.net/crspscforfcp.html
    Digital Heaven's DH_Box: http://www.digital-heaven.co.uk/dh_box

  • Editing Clips oldschool style??

    Hey everyone!
    I'm used to using the old version of iMovie (the one where you had the clip archive on the right and then the bar below it) and just started using iMovie '09. What I love about the old version is you could watch the clip normal speed, pause where you want to split the clip, and then un-pause and watch to the point where you want to cut again. When I try to edit this way in iMovie '09, every time I press the spacebar to pause, the playhead goes to the start of the clip and I lose the place where I want to split/trim the clip to. All the tutorials I've watched never discuss an option to watch the clip normal speed (not skimming) and edit that way. Is there a setting or a way I can edit clips the old iMovie way?
    In case you're wondering, I don't like to skim because I can't hear the audio clearly (which is the most important aspect of the film I'm working on).

    The way you do this in iMovie is to drag your mouse (left click over the frames from the in point to the out point. There should now be a yellow border around these frames. Do not worry about getting it exact, because it is easy to drag the yellow handles to the left or right, or even use the little arrows to do fine adjustments of a frame at a time.
    The trick to hearing exactly what sound is in the selection is to right click on the selection and select "Play Selection".
    The right-click is also how you access the split clip and trimming tools. You can easily delete the selection, split the selection, or delete everything except the selection in the clip.
    Another trick is to go to iMovie/Preferences and select "Display Time as hh:mm:ss:frames". This will let you edit to the frame level rather than to the nearest 1/10th of a second.
    Also, you can move the thumbnail slider to 1/2 second in the Project Pane to make it easier to do fine edits.
    I strongly suggest you look at the iMovie Video Tutorials available in the help menu. Also, see [Ken Stone's iMovie Tutorial.|http://www.kenstone.net/fcphomepage/imovie_09stone.html#top]
    Finally, if you want to stay old-school, [see Aaron Miller's blog post on setting in and out points through keyboard commands|http://www.unlockingimovie.com/2009/01/reader-tip-use-shift-arrow-to-s et-start.html]. Aaron is a forum contributor and author of "iMovie 09: The Missing Manual." His blog has many useful tips.

  • Adobe Bridge CC Smart Collections are not displaying all images in the folder

    I'm having an issue with Bridge CC were I setup a smart collection to monitor my new photos. The folder contains over 300 photos, but is only displaying 160. The only condition I set is to have a minium file size of 10kb, so it should bring in all files since most are over 4mb. At first I thought it was a problem with the files themselves (permissions or something) but if I open the folder in bridge it easily displays all of the images easily. Any ideas?

    I'm having an issue with Bridge CC were I setup a smart collection to monitor my new photos.
    You might want to describe this workflow a bit more. Do you create this from an existing folder or are you adding new photo's?
    A Smart Collection does not refreshes it self automatically. You either have to use the edit icon top right of the content panel to save again or deselect and select the collection itself to let it refresh the content.

  • How can I display all results of a array element in a TS2.0 NumericArrayMeasurement in a single report line?

    TestStand2.0 generates for each result property ( data, limits, status...) of each array element in a NumericArrayTest an extra line in the test report.
    How can I change this to display all result properties of one array element in a single line?
    How can I reduce the spaces between the property name and its value in the report?
    How can I delete the message: "Measurement[x]" and display only the Measurement Alias (named in the Edit Limits menu)?
    This means I like to change my report from:
    Measurement[0] (ADC1):
    Data: 5000
    Status: Passed
    Measurement[1] (AD
    C2):
    To:
    ADC1: Data: 5000 Status: Passed
    ADC2: ...

    Hi,
    What you can do, is use the Override Callbacks for Modify the Report that is Generated.
    Also you can also change the report sequence 'reportgen_txt.seq' to achieve the desired affect. If you go for modifying the report sequence then copy this to the User folder and then make your changes.
    In the Resources Library you can find simple examples were the report has been modified by either using the Override Callbacks or by modifying the actual sequence.
    One other item in the Report Options you will have to set the 'Select a Report Generator for Producing the Report Body' control to use the Sequence instead of the DLL.
    Hope this helps
    Ray Farmer
    Regards
    Ray Farmer

  • How to display all value of metadata from nodes collection model in content presenter template

    Hi All,
    first of all the new look of OTN is great.
    coming to problem i am facing (i dont know whr to ask here or in portal forum).
    i am creating a content presenter template to display list of items.
    now as per requirement i need to create a drop down to filter the list.
    now while check- in a file author would choose a value in one metadata field lets say xCategory(which is a single select list).
    i have to display similar category list on portal to allow user to filter list.
    i could hv used view of xCategory but problem is files are targeted to role using ACL. so u see i cant display all category to all users.
    also customer wants this whole thing to be Dynamic i.e. they can add value of xCategory later that to could be only for specific role (on portal it should be role specific , author can see whole list not a problem there).
    so what i think is if content is given as search result so the category. so now if i can get the all xCategory metedata from 'nodes' collection model in template i can create drop down with out having any additional bean.
    somthing like this
    #{nodes.xCategory} (but this one is not correct).
    please suggest me any solution.
    thanks
    -somesh

    Hi,
    you can do all of what you said with JSF. ADF Faces provides drag and drop functionality (have a look at the Web Developer Guide) that allow you to move nodes within a tree. The drag and drop framework sends an event notification to the server with a reference to the changed node.You can also have context menus on a tree node to help users creating, deleting and editing a tree nodes. JavaScript isn't required at all, even if you wanted to drag and drop a row in a table on top of a tree node to create a new tree node.
    I just finished a book project in which we explained this usecase. As soon as I find the time, I'll follow up with a blog entry on this as it seems to be a common requirement. However, as mentioned, the web developer guide on OTN explains drag and drop in ADF Faces pretty well.
    However, if you choose the "Search" link above, choose JDeveloper and ADF as the product to search for and type drag and drop as the search string, then you get lots of code sample posted in the past to this forum
    Frank

  • How can I display ALL my favorite folders?

    My drop-down menu of folders only displays some of my folders. I have typically 15 to 20 and only 5 to 6 appear in the menu. What do I need to do to always display all my folders?

    Is this problem in the dialog where you add or edit a bookmark? There is an icon all the way to the right of the "most recently used" folders button that expands a tree view. In that box you may need to click the triangle to the left of Bookmarks Menu to start expanding it. (Screen shot attached.)

  • Hi,how can i change the default settings on my adobe readerX1 such that it will display all my pdf files according to their individual cover pages (as cover picture thumbnails)before i click them to open and read........i really enjoyed this feature as a

    hi,how can i change the default settings on my adobe readerX1 such that it will display all my pdf files according to their individual cover pages (as cover picture thumbnails)before i click them to open and read........i really enjoyed this feature as a default settings upon installation in previous editions of adobe reader .i use a windows 8 pc now.thank

    For sideloaded content the nook pulls the metadata from ePub file itself.  I would suggest looking at a program like Sigil or Calibre that will let you edit the metadata in the book to make it appear like you want.
    For the PDF vs ePub - No, that's the way PDFs work (think of them as graphics, not text), wheres ePubs are Web Pages - so  no you can't them to behave exactly alike without converting the files.

  • Outlook not Displaying all Sharepoint 2007 Shared Calendar entries

    Hello all, we have an issue that I've been working on for a while with no success.
    One Sharepoint List (Calendar) with approval workflow, connected to Outlook. Two users with the same privileges to the list. Both users see all "approved" items when viewing the list via IE. One user can see ALL (approved and pending) items via
    Outlook, the other only seems to be able to view SOME approved items (not all approved items) via Outlook.
    So, my questions:
    1. Any idea why outlook is displaying ALL items to User 1, when the list view in IE only shows approved items?
    2. Why can User 2 only view some of the approved items via outlook? Rather than all items like user 1? (At the very least you'd expect User 2 to at least see all approved items.
    Anyone seen this before?  I give up...

    I have seen a lot of weirdness with MOSS 2007 calendars syncing to Outlook, but as far as fixes, its normally not too bad. for this particular issue, you might just want to remove the calendars from their outlook and re-add them.
    However, normally the most common issue is that outlook will allow users to create calendar entries that are invalid in SP.  i.e. the SP calendar has a required field, but Outlook does not allow users to edit that field as its custom (or outlook lets
    you keep the title empty which also causes weirdness in syncs).
    I would look and see what columns are required on the list, then export the list to excel and look for any items which have empty required fields.  Either, update those items, or delete them from the calendar, then resync to Outlook and it should be
    good.
    There may be something different, but this is the most common thing I see on these issues, let me know if it helps or not. 
    Christopher Webb | Microsoft Certified Master: SharePoint 2010 | Microsoft Certified Solutions Master: SharePoint Charter | Microsoft Certified Trainer| http://christophermichaelwebb.com

  • Status bar of Oracle from runtime applet is not displaying all of a sudden

    Hello,
    The status bar of Oracle form runtime applet is not displaying all of a sudden..It was displaying before but now its not......It helps me to see errors......how can I restore it?

    My console was set to a specific window name..it was not null at all....but the status bar wont show...
    But I solved it ...by changing the applet size...
    Applet container size is controlled by the HEIGHT and WIDTH parameters in the formsweb.cfg. To maximize the applet area to the size of the browser, do the following:
    HEIGHT=100%
    WIDTH=100%
    Thank you all for your help and support...
    Edited by: user10746194 on Feb 11, 2010 6:33 AM

  • Photoshop element 9 Organizer never displays commands the File, Edit,etc.

    I bought “Adobe Photoshop element 9 Classroom in a Book” after I had already imported my photos into the program.  When I tried to follow the instructions, “Creating a new catalog” in page 9 of the book, I was not able to choose File>Catalog to open its dialog box and create a new one – the commands at top of the Organizer did not display the commands File – Edit – Find – View – Window or Help.  As a matter of fact, the Organizer never displays these commands at all.  Please help!

    http://www.johnrellis.com/psedbtool/photoshop-elements-faq.htm#_Setting_the_Windows
    still pertains for PSE 9

  • Report to display all the contacts of an opportunity.

    Hello,
    I have a requirement, can we create a report which displays all the contacts of an opportunity apart from primary contact.
    Any inputs on the same will be appreciatable. TIA
    Edited by: 1004233 on May 6, 2013 12:16 AM
    Edited by: 1004233 on May 6, 2013 3:28 AM
    Edited by: 1004233 on May 6, 2013 3:28 AM

    Hey Aveek;
       Try this, which will get the most recent one.  You would just need to change it to loop at the edids records to get at them all...
          TABLES: *edidc, *edids, *t100.
          DATA: wf_string type string.
          CLEAR *edids.
          SELECT SINGLE *
             INTO *edids
             FROM edids
             WHERE docnum = *edidc-docnum
               AND status = '51'.
          SELECT SINGLE text
             INTO *t100-text
             FROM t100
             WHERE sprsl = 'EN'
               AND arbgb = *edids-stamid
               AND msgnr = *edids-stamno.
             CLEAR wf_string.
          MOVE *edids-stapa1 TO wf_string.
          REPLACE '&' WITH wf_string INTO *t100-text.
          IF sy-subrc EQ 0.
            CLEAR wf_string.
            MOVE *edids-stapa2 TO wf_string.
            REPLACE '&' WITH wf_string INTO *t100-text.
            IF sy-subrc EQ 0.
              CLEAR wf_string.
              MOVE *edids-stapa3 TO wf_string.
              REPLACE '&' WITH wf_string INTO *t100-text.
              IF sy-subrc EQ 0.
                CLEAR wf_string.
                MOVE *edids-stapa4 TO wf_string.
                REPLACE '&' WITH wf_string INTO *t100-text.
              ENDIF.
            ENDIF.
          ENDIF.
          A little sloppy (OK, alot!), but it gets the job done...
    Cheers,
    John

  • Display Error in Digital Editions

    Recently tried the Fixed Format Epub export in InDesign 2014. Digital editions displays all the text in the document extremely over size. I viewed one of the XHTML pages in DreamWeaver, also 2014 and in Live Mode in appeared normal but in Design view it displayed just as it did in Digital Editions. I also opened the Epub file in Sigil and the pages look fine there. Any idea's what's up.
    I am fairly new to e-publishing as well and am having trouble navigating between the features and layout possibilities in InDesign and what comes out in XHTML. Does anyone know of a list of things you can do in InDesign that aren't supported in the epub format?
    For example: a 1 row table with two columns, the first column narrow with an Icon in it (png format) and the second column wider with text in it. The table stroke in InDesign is set to none, and the table has a black fill at 20%. Cell styles applied have the stroke set to none. When I look at the table in the resulting epub file. It has a stroke as a boarder and the two cells divider has a stroke. Both strokes are thin and black? I'm looking to create a sort of header as a grey box with an inset icon at left and a text description at the right.

    On Mac, try looking in:
    /Users/dug.geo/Documents/Digital Editions
    On Windows, look for "Digital Editions" in "My Documents". If it's not there, look one level above "My Documents".
    If you know the filename of the PDF, you could also try doing a file system search for it.

  • How do I save an edited clip back to my library?

    I've dragged a clip to the timeline, I've edited it by rotating the clip and expanding it's size. I now want to save that edit that I've just done on the clip BACK to my library window. How do I do this? I've tried right-clicking and selecting "Make Subclip" but a second instance of the video just appears back in the library in it's original form.

    If you are "fixing"  a clip, and want the effects you applied to follow every use of the clip in the timeline, you may want to look at applying a Master Clip effect to the source clip. Once you have done that, every time you use material from the clip, the corrections you have made by applying Master Effects will be applied as well.
    This is useful, for example, if you are correcting say - phone footage that needs to be rotated vertically, then cut up to the timeline.
    There is a tutorial here:
    How to apply effects to all instances of a clip | Adobe Premiere Pro CC tutorials
    When you want to apply Motion effects such as scale and rotation to a Master Effect, you can go to Effects > Distort > Transform and apply the Transform effect. That will give you scale and rotation control.
    By apply Master Effects, you avoid the need to export/import or subclip.
    MtD

  • How to display all running windows in xmonad ?(SOLVED)

    The function is same as pressing `alt+tab` in MS windows. When pressing the specified hot key, xmonad will display all running windows. And the user can choose and shift to the selected window, which may be on different workspace.
    Sincerely!
    Last edited by sw2wolf (2010-01-31 01:18:42)

    sure you can use keys to control volume.
    if you've got volume keys on your keyboard then you can use
    ((0, 0x1008ff11), spawn "aumix -v-6") -- volume--
    ((0, 0x1008ff13), spawn "aumix -v+6") -- volume++
    ((0, 0x1008ff12), spawn "amixer set Master toggle") -- mute
    else you can use other keys (like up/down) as keybindings to aumix & amixer.
    you can always use /usr/share/X11/XKeysymDB for keysymbols
    hope that helps
    Last edited by vik_k (2010-01-30 09:26:26)

Maybe you are looking for