Displaying error messeges in MONITOR/Error Stack not working in 2004s

This trick is not working for me. I couldn't see the error messages in the error stock & temp storage. Am i missing anything here? Please advise. Thanks.
CASE SY-SUBRC.
WHEN 0.
RESULT = VALUE.
WHEN 1.
CLEAR MONITOR.
MONITOR_REC-msgno = '005'.
MONITOR_REC-msgid = 'SDBW'.
MONITOR_REC-msgty = c_msgty_e.
MONITOR_REC-msgv1 = SOURCE_FIELDS-VBELN.
MONITOR_REC-msgv2 = SOURCE_FIELDS-VDATU.
MONITOR_REC-msgv3 = SOURCE_FIELDS-WAERK.
MONITOR_REC-msgv4 = SOURCE_FIELDS-HWAER.
APPEND MONITOR_REC TO MONITOR.
RAISE EXCEPTION TYPE CX_RSROUT_ABORT.
WHEN 2.
CLEAR MONITOR.
MONITOR_REC-msgno = '006'.
MONITOR_REC-msgid = 'SDBW'.
MONITOR_REC-msgty = c_msgty_e.
MONITOR_REC-msgv1 = SOURCE_FIELDS-VBELN.
MONITOR_REC-msgv2 = SOURCE_FIELDS-VDATU.
MONITOR_REC-msgv3 = SOURCE_FIELDS-WAERK.
MONITOR_REC-msgv4 = SOURCE_FIELDS-STWAE.
APPEND MONITOR_REC TO MONITOR.
RAISE EXCEPTION TYPE CX_RSROUT_ABORT.
ENDCASE.

GK, have you gotten the monitor messages to work?
I applied Note 1005975, and we are also on ABAP SP11, but I can't get any messages to display in the monitor. When I use the
"raise exception type CX_RSROUT_ABORT" statement, I get an error message
"Exception CX_RS_STEP_FAILED logged", but none of my MONITOR_REC entries.
If I don't raise CX_RSROUT_ABORT, I get nothing.
I can create entries in the job log by the following:
MESSAGE E001(ZBW) with MONITOR_REC-MSGV1,
so I know my SE91 definition is correct, but this is not the same as writing to the monitor, as I understand it.

Similar Messages

Actionscript error checking not working?

Does error checking only work on actionscript files that are imported by main file?
Also...will error checking not work on the current open file if another file contains errors?

from where u are loading the external SWF
possible problems are
check the URL
check for crossDomain problem

I am trying to connect my MacBook Pro to my TV with a mini display port to HDMI converter. Its not working. Any suggestions?

I am trying to connect my MacBook Pro to my TV with a mini display port to HDMI converter. Its not working. Any suggestions?

Depends on your model TV. Read your TV user manual. The newer models have "how to hookup" instructions for computer & games.
You can also do a forum search as well as a Google search.

IPS event monitor and reports not working

Dear after upgrading my IPS from E3 to E4  the event monitor and reports not working, can you please advice my to solve this issues

Hi All,
Filter settings below:
The filter works partially as I don't get alerts on the IPS itself.
Firewall LOG:
4          Feb 14 2014          15:33:22                              39715                    514          IPS requested to drop UDP packet from SOURCE_VLAN_NUMBER:/39715 to DESTINATION_VLAN_NUMBER:/514
IPS LOG (when enabled):
evIdsAlert: eventId=1352793300955167909 vendor=Cisco severity=low
originator:
    hostId: SSM02
    appName: sensorApp
    appInstanceId: 1192
time: Feb 14, 2014 15:33:22 UTC offset=0 timeZone=GMT00:00
signature:   description=IP Fragment Too Small id=1206 version=S212 type=anomaly created=20030801
    subsigId: 0
    sigDetails: Too many small IP fragments in datagram
interfaceGroup: vs0
vlan: 0
participants:
    attacker:
      addr: 172.x.x.x locality=OUT
      port: 39715
    target:
      addr: x.x.x.x locality=OUT
      port: 514
      os:   idSource=unknown type=unknown relevance=relevant
alertDetails: InterfaceAttributes: context="single_vf" physical="Unknown" backplane="GigabitEthernet0/1" ;
riskRatingValue: 50 targetValueRating=medium attackRelevanceRating=relevant
threatRatingValue: 50
interface: GigabitEthernet0/1 context=single_vf physical=Unknown backplane=GigabitEthernet0/1
protocol: udp
Our next step is to make a service policy exception on the firewall itself. We are also considering reloading the IPS device or at least the analysis engine.
Thanks for all your help so far. Any more suggestions are most welcome. I'll keep you up to date.
Regards
Mariusz

My iPad display become white rather than keys are not working, i can not turn off .

My iPad display become white rather than keys are not working, i can not turn off .
version number iSO 8

Your statement makes no sense at all. Please clarify.

The display the progress of ongoing downloads is not working on firefox

The balls are rotating, I go to save the file but for some reason, the download display arrow wont light up and the file wont save.
Here's an example. I went to this video on you tube.
As I click on the download helper all the files are there.
Yet when I go to save the file (into my download folder, normal the green arrow would light up and the file would download.) nothing happens anymore. The download progress section is empty and the arrow is grey.
Posted February 28th, 2015, 8:01 pm
I'm having the EXACT same problem! Even the (1) or (2) or (3) is shown. But nothing is downloading. Problem started about 24 hours ago.

the display the progress of ongoing downloads is not working on firefox
The balls are rotating, I go to save the file but for some reason, the download display arrow wont light up and the file wont save. Here's an example. I went to this video on you tube. As I click on the download helper all the files are there. Yet when I go to save the file (into my download folder, normal the green arrow would light up and the file would download.) nothing happens anymore. The download progress section is empty and the arrow is grey.

Mini Display error (but not the same as the other person who posted here)

I have a new Mac Pro (12-core) with the ATi 5870 card. I have a Dell U2711 monitor.
When I have the DVI from the Dell monitor connected to the Mac Pro, everything works fantastic. However, if I use the Display Port (from the Dell moni) to the MiniDisplay Port (on the Mac Pro) the machine will not properly wake from sleep mode, nor will it display a picture when it turns on. For example, if I turn on the Mac Pro with the DP to MDP, the Mac Pro boots, has sound, but never shows picture no matter what I do. The cable I have is a DP to MDP cable I purchased from Amazon. It is PROPERLY connected. I will also add that I have tried FRESH installations of OSX and unfortunately it still doesn't work.
Is this a graphics card issue? A normal issue with this combination of monitor and Mac Pro? Thanks everyone.

When people do not answer, it is generally because they feel they have nothing to add.
Your display card works fine on the DVI port. Everything works great except your adapter. If you have pushed the Mini DisplayPort end into the Mac socket far enough so that the metal is not showing any more, just the plastic, then the adapter is not working or defective.

External display monitor suddenly is not working; power is on

Hello,
My LG external monitor display suddenly is not working today. It powers on, and it says "analog power saving mode", and it is detected by my ibook G4. When I go to preferences, and show displays, it shows that two displays are active, my laptop "Color LCD" and my external, "L1932Tq". If the external is plugged in, it indicates that that is the system in use, though the external monitor is black and unresponding (except for power light which is on). I replaced all cords - the power cord and the mini VGA cord and it's connecting cord to the monitor, and there are no changes.
Is this monitor just suddenly broken, perhaps through it's internal connection devices??
Thanks!!
alidocs

Dear Shankar,
Issue is solved. It was Program Error from SAP side.
Now All the buttons are working fine and I am able to print PDF also.
Solution is implement the note 2031585 - SAP NWBC ABAP Runtime Patch 40.
System Details : ECC 6.0 NetWeiver 7.4 ,
EHP 7 , SP-Level 06
Thanks a lot for all your suggestions.
Regards,
Namsheed.

ADF Custom error handler not working.

Hi All,
i am using jdev version 11.1.1.5.0. i have created one custom error handler class in model layer which extend DcErrorHandlerImpl class.
and do the entry in Databinding.cpx file
*<Application ErrorHandlerClass="mypackage.classname"/>*
i have override getDisplayMessage(BindingContext ctx, Exception ex) method to show SQL Exception which comes from database table trigger.
code is following-
package com.in.jagran.view.services;
    import java.sql.SQLException;
    import oracle.adf.model.BindingContext;
    import oracle.adf.model.binding.DCErrorHandlerImpl;
    import oracle.jbo.JboException;
    public class AclasErrorHandler extends DCErrorHandlerImpl {
      public AclasErrorHandler(boolean setToThrow) {
        super(setToThrow);
        System.out.println("Inside Error Handler class");
      public AclasErrorHandler() {
          super(true);
       // this(true);
       * Returns the message that will be reported to JSF for each error that occurs.
       * Returning "null" is the way the custom error handler signals that a given exception
       * should not be reported to the client.
      @Override
      public String getDisplayMessage(BindingContext ctx, Exception ex)
        if (ex instanceof oracle.jbo.ValidationException) {
          return super.getDisplayMessage(ctx, ex);
        else {
          // Extract and return the error message that has to be displayed
          Exception exception = ex;
          String message = "";
          // If this exception is an instance of JboException,
          // try to find the cause by recursing over the eventual causing exceptions
          if (exception instanceof JboException)
            Throwable[] exceptionList = ((JboException)exception).getExceptions();
            while (exception instanceof JboException
                    && exceptionList != null && exceptionList.length > 0)
              exception = (Exception)exceptionList[0];
              if (exception instanceof JboException) {
                exceptionList = ((JboException)exception).getExceptions();
          // *** Special processing of SQLExceptions
          if (exception instanceof SQLException) {
            message = exception.getMessage();
            // Ignore the lines in the error message that indicate the line number in the PLSQL code that the error resulted on.
            int ind = message.indexOf("ORA-06512");
            if (ind > 0)
              message = message.substring(0, ind);
          // *** If the the reason for the JboException was data creation exception then display the message
          // of the top JboException (i.e. JBO-*****: Invalid numeric value, date format or time format)
          else if (exception instanceof NumberFormatException || exception instanceof IllegalArgumentException) {
            // Report the top exception
            message = ex.getMessage();
          // Otherwise report the message of the lowest exception in the hierarchy
          else {
            message = exception.getMessage();
          return message;
    }but it is not working for me.
thanks in Advance.

yes i have used dubugger.
i have set break point to following line-
return super.getDisplayMessage(ctx, ex);
if (ex instanceof oracle.jbo.ValidationException) {
        return super.getDisplayMessage(ctx, ex);
}when atttribute validation done like i have attribute of type number and i have done the validation "must be greater than 0" now when i have given negative value control go to above line.
and i have added following code also in handler class
        @Override
           public void reportException(DCBindingContainer dCBindingContainer,
                                       Exception exception) {
System.out.println(exception.getMessage());
                   super.reportException(dCBindingContainer, exception);
               }now when i have done commit operation control go to here and println statement print follwoing error on log window.
JBO-26041: Failed to post data to database during "Rollback to Savepoint": SQL Statement "null".

SAVE_TEXT for long error Message not working.

Hi Experts,
I am Using SAVE_TEXT FM to Dynamically Change Long Text for a message.
1. i am able to run succesfully SAVE_TEXT with SY-SUBRC = 0.
2. I can see the entry in STXH.
3. I have also performed COMMIT_TEXT with all the parameters and COMMIT_WORK.
4. I am able to See the changed Text using READ_TEXT FM.
but if i go to SE91 to the message no. and see long text i am not able to see the changed text.
also when change the long text of it in a program and call the error message we should be able to see the changed long text on click of error message in status bar but it shows the same message as in SE91.
Earlier for this Text Object & Text ID in SE75 Save mode was SPACE so i changed the same to Update still its not working.
Following are the details of my code-
REPORT YTEST_MES message-id ZFQM.
parameters : p_text type c.
at selection-screen.
if p_text <> 'C'.
data: HEADER LIKE THEAD.
data: t_lines type standard table of TLINE.
data: ls_lines like line of t_lines.
ls_lines-TDFORMAT = ' '.
ls_lines-TDline   = 'TEST1 TEST2 TEST3'.
append ls_lines to t_lines.
Header-TDOBJECT   = 'DOKU'.
Header-TDNAME     = 'ZFQM093'.
Header-TDID       = 'NA'.
Header-TDSPRAS    = 'EN'.
Header-TDFORM     = 'S_DOCU_SHOW'.
Header-TDSTYLE    = 'S_DOCUS1'.
Header-TDLINESIZE = '72'.
CALL FUNCTION 'SAVE_TEXT'
    EXPORTING
     CLIENT                = SY-MANDT
      header                = header
     INSERT                = 'X'
tables
      lines                 = t_lines
   EXCEPTIONS
     ID                    = 1
     LANGUAGE              = 2
     NAME                  = 3
     OBJECT                = 4
     OTHERS                = 5
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
         WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
CALL FUNCTION 'COMMIT_TEXT'
EXPORTING
   OBJECT                = 'DOKU'
   NAME                  = 'ZFQM093'
   ID                    = 'NA'
   LANGUAGE              = SY-LANGU
COMMIT WORK AND WAIT.
message e093 with 'C'    'XXXX'.
endif.
I have tried calling SAVE_TEXT will possible combination's of INSERT = 'X' or space or
SAVEMODE_DIRECT       = 'X' or Both Space or 'X'.
I know i am missing a small thing...but was unable to figure out the same.
Please Help.
Regards,
Akash

Hi Keshav.T ,
Thanks for your answer, but all the above FM u provided-
read_text
init_text
edit_text
Cannot be used as-
Read_TEXT - I want to change Text not read it.
INIT_TEXT- this cannot be used to change texts.
EDIT_TEXT- this function module Opens the Long text screen
                   and we have to manually save it, but i want to save the text automaticaly
                   all this is done using SAVE_TEXT.
Only problem is I am missing something after the call of SAVE_TEXT because text is changed
as i can see that using read_text FM but if i go to SE91 and see long text for the corresponding message no. i cannot see the
changed text done bu SAVE_TEXT.
Please help.
Akash

error-page not working in J2EE SDK 5 Update 1

I recently migrated from Tomcat 5 to J2EE SDK 5 Update 1, and since, have not been able to get my custom error page working. I have verified the path to the error page by testing the link directly in a browser, but still see the default gray and white error page anytime an error occurs. This exact xml worked perfectly in tomcat 5 - am I missing something?
I have the following in my web.xml:

<error-page>
    <error-code>500</error-code>
    <location>/error.faces</location>
</error-page>

<error-page>
    <exception-type>java.lang.Exception</exception-type>
    <location>/error.faces</location>
</error-page>

<error-page>
    <error-code>404</error-code>
    <location>/error.faces</location>
</error-page>

Hi, Here is a link from Mozilla that addresses this : http://support.mozilla.com/en-US/kb/Managing+the+Flash+plugin
Page down to "Flash does not work properly and /or will not update."
When you have two SWF installed the websites use the old one, not the new one. Don't ask me why, I often wonder that myself. That's why when you disabled the old one, Flash didn't work.
Hope this solves the issue.
Thanks,
eidnolb

Error Table not found ODBC -2004 [melding 131-183] when opening "Open documents"

Hello, we get an error on opening the screen "Open Documents" in SAP B1 9.00
It says : Error Table ................ not found ODBC -2004 [melding 131-183]
Everytime a different table gets mentioned: OAIB - OWHT - WLS1 - CSHS.
Last time when we created a new userprofile it was gone, but now after twoo weeks this error is back.
Does anyone know how we can create a solid solution ?
Thanks in advance - Jos Dielemans

Hi,
It is an application error. Please check SAP note:
2008925 - You cannot run the Open Item List report for Purchase Requests
Thanks & Regards,
Nagarajan

Uncaught error handler (global error handling) not working in Chrome FP 10.1.103.22

A few days ago I very happily discovered the new global error handling available in flash-player (FP) 10.1
Now while all works well in Firefox (using Adobe's FP 10.1.102.64), nothing happens in Chrome (using Google's FP 10.1.103.22).
I can disable Google's FP using the "about:plugins" page in Chrome, restart the browser, and then everything works since the browser falls back to the other flash plugin installed, which is again Adobe's FP 10.1.102.64.
Is this a known bug?

Don't tell me the uncaught error handler only works for a debugger version....??
The documentation, which I read quite carefully, doesn't have a word on this. It suggests rather the opposite:
"When content is running in a debugger version of the runtime, such as the debugger version of Flash Player or the AIR Debug Launcher (ADL), an uncaught error dialog appears when an uncaught error happens. For those runtime versions, the error dialog appears even when a listener is registered for the uncaughtError event. To prevent the dialog from appearing in that situation, call the UncaughtErrorEvent object's preventDefault() method."

Controller Error is not working for Custom Responsibility

Hi All
I create a controller , Its working with Standard Responsibility. I am Setting two Values , One from database Column and other from calling a custom funciton . Its working in Standard Responsibilty.
But same thing I am trying in Custom Responsibility , Its showing One value ie database value, But not The function return value.
Is it the issue with security?

hi Gyan,
ex;
XXResp is custom Resp : Profile attach is HR Security Profile
If you remove this Security Profile , the Controller Works.
But if u set the Controlller it does not work.
Thanx

How can I deactivate Adobe Acrobat 8 on a laptop with a monitor that does not work?

Or is there some work-around I can use? I got a new laptop and have reinstalled the program but I keep getting a pop-up that wants me to register it again. I have but it keeps popping up. I read in the user's guide for this version that "Note: If you want to install the software on a different computer, you must first deactivate the software on your computer: Choose Help > Activation > Deactivate." I figure that that is what the problem is. So now what do I do? It is a little hard to "choose" when the monitor is black.
As an added complication I am now getting an error message on the pop-up that tell me "A problem was encountered while trying to send information over the Internet." Help!!!
I am currently using a Sony Vaio T Series Ultrabook now with Windows 8. My old laptop was a Compaq and was using Windows XP Home Edition. It was about 10 years old.
Thanks in advance for your help.
Aimee

Can you plug in a remote monitor? You may have to use the Fn key with the screen icon typically along the function keys to change to the external monitor. If that works, then do what you need. You might also try putting the HD in another machine and see if it works there.

Displaying error messeges in MONITOR/Error Stack not working in 2004s

Similar Messages

Maybe you are looking for