Displaying Information selected within a Checkbox Choice column on a separate line

I am looking to change the display output of a Choice column, which has checkboxes enabled for multiple selections, to show on Separate lines.
At the moment when more than one box is selected the data is separated by a comma
JR

Hi Treble99,
There is not an OOB way to implement displaying multiple values with separate lines. As the values are separated by a comma, you can replace the comma with break line.
Here are some posts for your reference:
http://stackoverflow.com/questions/16208081/comma-separated-string-to-linebreak
http://social.msdn.microsoft.com/Forums/sharepoint/en-US/9a58177f-f135-492b-97df-c6c70086c2d3/sharepoint-designer-show-line-break-for-multi-text-plain-text?forum=sharepointcustomizationlegacy
I hope this helps.
Thanks,
Wendy
Wendy Li
TechNet Community Support

Similar Messages

Display multiple choice column selections on a separate line in the body of email

This question could have been answered elsewhere and I just don't realize it. I have a SharePoint Foundation 2010 form (11 columns) that has one choice column allowing the user to select multiple options (checkboxes). The selections have been typed into "type each choice on a separate line". Moving to Designer we have created a workflow that sends an email when the user submits to form.
If Current Item: Select shift equals DAY request Email ................
The body of the email has this field:
Information Being Requested: [%Current Item: The following information is being requested%].
When the user gets the email the output for this field is string on a single line separated by a comma. What I need is each of the selections to be on a separate line so the users can easily read what is being requested and not miss any of the selection. I'm stuck. I'm not worried about text wrapping. I've been searching for hours but either it's not what a need, it's over my head, or I just don't know where to make the changes. I don't use VS but I do know html and I'm fairly comfortable in Designer. I would appreciate any help.

Firstly, can you edit your post and take the question out of the code / quote box. It'll make it easier to read.
Secondly the options depend on the version of SharePoint. Are we to assume you're using SharePoint 2003 or 2007 as you've posted into the legacy forums?
Steven Andrews
SharePoint Business Analyst: LiveNation Entertainment
Blog: baron72.wordpress.com
Twitter: Follow @backpackerd00d
My Wiki Articles:
CodePlex Corner Series
Please remember to mark your question as "answered" if this solves (or helps) your problem.

Creating a Folder Within Form or Document Library & Display the name not in the name column.

I have created a form library that will used to create folders within that. The folder creation is done using an InfoPath Form that has been uploaded to the Form Library. When the new folder was created the name will be displayed at the Name column within
the Form Library. I want to change that to another column like documents or suchlike.
Can it be done using InfoPath 2010 VSTA C# or not? If their are other options available please could you try to inform me!
Thank You,
Chiranthaka

Hi,
If you want to show the name of folder in another column, a workaround is that you can create an extra column, then create a SharePoint Designer workflow to set the value of
this column with the name of folder.
Here is a link about Create Workflow using SharePoint Designer and set field value for your reference:
http://www.codeproject.com/Tips/419037/Create-Workflow-using-SharePoint-Designer
I have seen a similar post from you in the link below:
http://social.technet.microsoft.com/Forums/en-US/c3ff3f17-dbe2-40f9-86c5-ff7d4b663f09/creating-a-folder-within-form-or-document-library-display-the-name-not-in-the-name-column?forum=sharepointcustomizationprevious
It's recommended that you post a single question in a single thread which will make it easier to be discussed by others.
Best regards
Patrick Liang
TechNet Community Support

Select One Choice-select multiple attributes into mutiple columns

Select One Choice-select multiple attributes into mutiple columns does not work.
read-only view object view1 - columns a, b, c
updatable view object view2 - also columns a, b, c
Select One choice has the capability to bind multiple columns to multiple columns. I understand how this wizard is to be used for these multiple mappings, i.e., view2.a mapped to view1.a, view2.b mapped to view1.b, etc., and using 'select multiple...' for the display attribute. When I complete the 'List Binding Editor" correctly, in this example, only column a will be updated. Columns b,c, etc. will not be effected.
Has anyone solved this? Please do not reply telling me how to use the editor, I know how, it just is not working.
Here is my jspx segment,
<af:selectOneChoice value="#{bindings.Eis000tv1SlOffice.inputValue}"
label="#{bindings.Eis000tv1SlOffice.label}">
<f:selectItems value="#{bindings.Eis000tv1SlOffice.items}"/>
Here is pageDef segment:
<list id="Eis000tv1SlOffice" IterBinding="Eis000tv1Iterator"
StaticList="false" ListOperMode="0" ListIter="OfficeSpaceV1Iterator"
NullValueFlag="1" NullValueId="Eis000tv1SlOffice_null">
<AttrNames>
<Item Value="SlOffice"/>
<Item Value="Floor"/>
<Item Value="FloorArea"/>
</AttrNames>
<ListAttrNames>
<Item Value="SlOffice"/>
<Item Value="Floor"/>
<Item Value="Area"/>
</ListAttrNames>
<ListDisplayAttrNames>
<Item Value="SlOffice"/>
<Item Value="Floor"/>
<Item Value="Area"/>
</ListDisplayAttrNames>
</list>
Here is the iterator:

can u set as specified here
-Djps.app.credential.overwrite.allowed=true http://radalcove.com/blog/?p=34

How to display only selected columns in the table on the tableview

Hi All,
I am displaying in the below tableview the data from the SFLIGHTS tables in the tableview using flow logic. It displays all the columns in the database table. How can I set in the code to display only selected columns and not all columns.
Also, in these columns displayed I want to make the key columns of SFLIGHT as non editable and the rest of the columns in SFLIGHT editiable. Can you please kindly share the code to implement this.
<%@page language="abap" %>
<%@extension name="htmlb" prefix="htmlb" %>
<htmlb:content design="design2003" >
<htmlb:page>
    <htmlb:form>
      <htmlb:tableView id              = "tv1"
                       visibleRowCount = "10"
                       selectionMode   = "lineEdit"
                       table           = "<%= flights %>"
                       filter = "SERVER"
                       sort = "server"
                       iterator        = "<%= iterator %>" />
    </htmlb:form>
</htmlb:page>
</htmlb:content>
Thanks
Karen

Hi,
   Please try this code.
<!-- To display Table control on BSP page with table internal table it_hist --!>
          <htmlb:tableView id              = "TV_HIST"
                           headerText      = "Previous History"
                           headerVisible   = "TRUE"
                           footerVisible   = "TRUE"
                           design          = "ALTERNATING"
                           selectionMode   = "LINEEDIT"
                           visibleRowCount = "5"
                           fillUpEmptyRows = "TRUE"
                           table           = "<%= it_hist %>"
                           width           = "500" >
<!-- to show selected columns give required field name --!>
<htmlb:tableViewColumns>
<htmlb:tableViewColumn columnName          = "FIELD1"
                                     title               = "COLUMN1"
                                     horizontalAlignment = "CENTER"
                                     width               = "65" >
              </htmlb:tableViewColumn>
<htmlb:tableViewColumn columnName          = "FIELD2"
                                     title               = "COLUMN2"
                                     horizontalAlignment = "CENTER"
                                     width               = "65" >
              </htmlb:tableViewColumn>
<htmlb:tableViewColumn columnName          = "FIELD3"
                                     title               = "COLUMN3"
                                     horizontalAlignment = "CENTER"
                                     width               = "65" >
              </htmlb:tableViewColumn>
<htmlb:tableViewColumn columnName          = "FIELD4"
                                     title               = "COLUMN4"
                                     horizontalAlignment = "CENTER"
                                     width               = "65" >
              </htmlb:tableViewColumn>
<!-- to make column editable set edit property to TRUE --!>
<htmlb:tableViewColumn columnName          = "FIELD4"
                                     title               = "COLUMN4"
                                     edit = "TRUE"
                                     horizontalAlignment = "CENTER"
                                     width               = "65" >
              </htmlb:tableViewColumn>
            </htmlb:tableViewColumns>
          </htmlb:tableView>

How to display the selection screen fields for selected checkboxes

Hi all,
         I have 7 checkboxes, for each check box we have some seletion screen fields.if i select first check box,i want to display first slection screen fields only.
and if we select more than one check box how to display the selection screen fields for selected check boxes,please help me this
Thanks
sriman.

hi,
Try this code
report z_13317_sdn2.
tables : mara, marc, dd03l.
parameters : p_chk1 as checkbox user-command ABC,
             p_chk2 as checkbox user-command PQR,
             p_chk3 as checkbox user-command XYZ.
select-options : s_matnr for mara-matnr modif id A,
                 s_ersda for mara-ersda modif id A,
                 s_werks for marc-werks modif id B,
                 s_lvorm for marc-lvorm modif id B,
                 s_tab for dd03l-tabname modif id C.
data: v_chk1,
      v_chk2,
      v_chk3.
at selection-screen output.
loop at screen.
    if screen-group1 = 'A' or
       screen-group1 = 'B' or
       screen-group1 = 'C'.
        screen-input = 0.
       modify screen.
    endif.
endloop.
loop at screen.
    if v_chk1 = 'X'.
      if screen-group1 = 'A'.
        screen-input = 1.
        modify screen.
      endif.
    endif.
    if v_chk2 = 'X'.
      if screen-group1 = 'B'.
        screen-input = 1.
        modify screen.
      endif.
    endif.
    if v_chk3 = 'X'.
      if screen-group1 = 'C'.
        screen-input = 1.
        modify screen.
      endif.
    endif.
endloop.
at selection-screen.
if sy-ucomm = 'ABC'.
    if v_chk1 = ' '.
      v_chk1 = 'X'.
    else.
      v_chk1 = ' '.
    endif.
endif.
if sy-ucomm = 'PQR'.
    if v_chk2 = ' '.
      v_chk2 = 'X'.
    else.
      v_chk2 = ' '.
    endif.
endif.
if sy-ucomm = 'XYZ'.
    if v_chk3 = ' '.
      v_chk3 = 'X'.
    else.
      v_chk3 = ' '.
    endif.
endif.
Regards,
Sailaja.

Reading the record and displaying when u select it using checkbox

hi,
       how to read the particilar record and display it in a popup screen when u select it using checkbox and then press 'DISP' button in alv(normal alv not with oops concepts).
like i select a row which is checked (checkbox) it and i have to read that particular record and display (value of keyfield say vbeln) details in a popup screen.

hi,
go through the faloowing code.
this for normal popup.
*& Report ZGS_ALV_POPUP_2_SELECT
REPORT ZGS_ALV_POPUP_2_SELECT.
TYPE-POOLS: slis.
PARAMETERS: p_title TYPE sy-title default 'Sales Document:item data'.
DATA: itab TYPE vbap OCCURS 0 WITH HEADER LINE,
      selfield TYPE slis_selfield.
START-OF-SELECTION.
SELECT *
    FROM vbap
    INTO TABLE itab
    UP TO 20 ROWS.
CALL FUNCTION 'REUSE_ALV_POPUP_TO_SELECT'
       EXPORTING
            i_title                 = p_title
*           I_SELECTION             = 'X'
           I_ZEBRA                 = 'X '
*           I_SCREEN_START_COLUMN   = 0
*           I_SCREEN_START_LINE     = 0
*           I_SCREEN_END_COLUMN     = 0
*           I_SCREEN_END_LINE       = 0
*           I_CHECKBOX_FIELDNAME    =
*           I_LINEMARK_FIELDNAME    =
*           I_SCROLL_TO_SEL_LINE    = 'X'
            i_tabname               = 'ITAB'
            i_structure_name        = 'VBAP'
*           IT_FIELDCAT             =
*           IT_EXCLUDING            =
*           I_CALLBACK_PROGRAM      =
*           I_CALLBACK_USER_COMMAND =
*            is_private              =
     IMPORTING
            es_selfield             = selfield
*            e_exit                  =
       TABLES
            t_outtab                = itab
       EXCEPTIONS
            program_error           = 1
            OTHERS                  = 2.
IF sy-subrc <> 0.
    MESSAGE i000(8I) WITH sy-subrc.
ENDIF.
WRITE:
         / 'Table Index : ', 20 selfield-tabindex,
        / 'Table Name : ', 15 selfield-tabname,
        / 'Field Name : ', 15 selfield-fieldname,
        / 'Table-Field : ', 15 selfield-sel_tab_field,
        / 'Field Value : ', 15 selfield-value.
the falowing code is for how to put checkbox and how to display the selected recods.you combine both codes.
*& Report ZRP_SALES
REPORT ZRP_SALES NO STANDARD PAGE HEADING.
DATA: TEMP_DATE_STR TYPE STRING.
*DATA: TEMP_NETP LIKE VBAK-NETWR.
DATA: TEMP_NETWR(10).
*DATA: TEMP_VBELN LIKE VBAK-VBELN.
DATA: CHECK TYPE C VALUE ' '.
*DATA: WA_VBELN LIKE VBAK-VBELN.
DATA: TEMP_DATE LIKE VBAK-ERDAT.
*DATA: TEMP_NETP_STR TYPE STRING.
DATA:FNAM(20), FVAL(20).
TYPES: BEGIN OF MY_VBAK,
       VTWEG TYPE VTWEG,
       VKORG TYPE VKORG,
       SPART TYPE SPART,
       NETWR TYPE NETWR_AK,
       VBELN TYPE VBELN_VA,
       ERDAT TYPE ERDAT,
       END OF MY_VBAK.
DATA: IT_VBAK TYPE MY_VBAK OCCURS 0 WITH HEADER LINE.
DATA: WA_VBAK TYPE MY_VBAK.
DATA: V_VBELN TYPE VBELN,
      V_ERDAT TYPE ERDAT.
SELECT-OPTIONS:S_VBELN FOR V_VBELN,
               S_ERDAT FOR V_ERDAT.
AT SELECTION-SCREEN.
*Check for Sales Order number to be non-initial.
IF S_VBELN IS INITIAL.
*Checking for Date to be non-nitial.
    IF S_ERDAT IS INITIAL.
      MESSAGE E003(ZRP_MSG). " Please enter either SO number or Date.
    ELSE.
*Validating the right low values for Date select option
      SELECT SINGLE ERDAT
             FROM VBAK INTO TEMP_DATE
             WHERE VBELN EQ S_VBELN-LOW OR ERDAT EQ S_ERDAT-LOW.
      IF SY-SUBRC NE 0.
        MESSAGE E004(ZRP_MSG).
      ENDIF.
*Validating the right high values for Date select option
      SELECT SINGLE ERDAT
              FROM VBAK INTO TEMP_DATE
              WHERE ERDAT EQ S_ERDAT-HIGH OR VBELN EQ S_VBELN-HIGH.
      IF SY-SUBRC NE 0.
        MESSAGE E005(ZRP_MSG).
      ENDIF.
    ENDIF.
ELSE.
*Checking for Date to be non-nitial.
    IF S_ERDAT IS NOT INITIAL.
      MESSAGE E003(ZRP_MSG). " Please enter either SO number or Date.
    ENDIF.
*Validating the right low values
    SELECT SINGLE VBELN
           FROM VBAK INTO S_VBELN
           WHERE VBELN EQ S_VBELN-LOW.
    IF SY-SUBRC NE 0.
      MESSAGE E001(ZRP_MSG).
    ENDIF.
*Validating the right high values
    IF S_VBELN-HIGH IS NOT INITIAL.
      SELECT SINGLE VBELN
              FROM VBAK INTO S_VBELN
              WHERE VBELN EQ S_VBELN-HIGH.
      IF SY-SUBRC NE 0.
        MESSAGE E002(ZRP_MSG).
      ENDIF.
    ENDIF.
ENDIF.
START-OF-SELECTION.
*First Screen.
SET PF-STATUS 'DISP'.
IF S_VBELN IS NOT INITIAL.
    SELECT   VTWEG VKORG SPART NETWR VBELN ERDAT
           FROM VBAK
           INTO TABLE IT_VBAK
           WHERE VBELN IN S_VBELN.
ENDIF.
IF S_ERDAT IS NOT INITIAL.
    SELECT VTWEG VKORG SPART NETWR VBELN ERDAT
           FROM VBAK
           INTO TABLE IT_VBAK
           WHERE ERDAT IN S_ERDAT.
ENDIF.
SORT IT_VBAK BY VKORG VTWEG SPART.
END-OF-SELECTION.
LOOP AT IT_VBAK.
    MOVE IT_VBAK-NETWR TO TEMP_NETWR.
    MOVE IT_VBAK-ERDAT TO TEMP_DATE.
    WRITE:/6 CHECK AS CHECKBOX.
    FORMAT COLOR 1.
    WRITE: IT_VBAK-VBELN UNDER 'SALES ORDER NO.' .
    WRITE: IT_VBAK-ERDAT UNDER 'DATE'.
    FORMAT COLOR OFF.
    FORMAT COLOR 2.
    WRITE: TEMP_NETWR UNDER 'NET PRICE'.
    FORMAT COLOR OFF."TEMP_NETWR,
    FORMAT COLOR 3.
    WRITE:IT_VBAK-VKORG UNDER 'SALES ORG',
          IT_VBAK-VTWEG UNDER 'DIST CHANNEL',
          IT_VBAK-SPART UNDER 'DIVISION'.
    FORMAT COLOR OFF.
    SKIP 1.
*FOR SUBTOTALS
    AT END OF SPART.
      SUM.
      FORMAT COLOR 5.
      WRITE:/6 'SUB TOTOAL OF NET PRICE IS : '.
      WRITE: 32 IT_VBAK-NETWR CURRENCY 'INR'.
      FORMAT COLOR OFF.
      SKIP 2.
    ENDAT.
*FOR GRAND TOTALS
    AT LAST.
      SUM.
      FORMAT COLOR 6.
      WRITE:/6 'GRAND TOTOAL OF NET PRICE IS : ',
      32 IT_VBAK-NETWR CURRENCY 'INR'.
      FORMAT COLOR 6.
    ENDAT.
ENDLOOP.
TOP-OF-PAGE.
FORMAT COLOR 6.
WRITE:/8    'SALES ORDER NO.',
       27   'DATE',
       42   'NET PRICE',
       57   'SALES ORG',
       70   'DIST CHANNEL',
       87   'DIVISION'.
FORMAT COLOR OFF.
SKIP 1.
*WHEN SALES ORDER IS SELECTED
AT LINE-SELECTION.
CASE :SY-LSIND.
    WHEN '2'.
      GET CURSOR FIELD FNAM VALUE FVAL.
      IF FNAM <> 'WA_VBAK-VBELN'.
        MESSAGE E006(ZRP_MSG).
      ELSE.
        SET PARAMETER ID 'MAT' FIELD FVAL.
        CALL TRANSACTION 'MM02' AND SKIP FIRST SCREEN.
ENDIF.
    ENDCASE.
*WHEN CLICKED ON PUSH BUTTON IN THE APPLICATION BAR
AT USER-COMMAND.
CASE:SY-UCOMM.
    WHEN 'DISP'.
      DO.
        CLEAR CHECK.
        CLEAR: WA_VBAK,TEMP_DATE_STR.
        READ LINE SY-INDEX FIELD VALUE CHECK
           IT_VBAK-VTWEG INTO WA_VBAK-VTWEG
*           IT_VBAK-NETWR INTO TEMP_NETP_STR
           IT_VBAK-VBELN INTO WA_VBAK-VBELN
           IT_VBAK-ERDAT INTO TEMP_DATE_STR
           IT_VBAK-VKORG INTO WA_VBAK-VKORG
           IT_VBAK-SPART INTO WA_VBAK-SPART.
        IF SY-SUBRC <> 0.
          EXIT.
        ELSEIF CHECK = 'X'.
          FORMAT COLOR 1.
          WRITE: 8 WA_VBAK-VBELN HOTSPOT. "UNDER 'SALES ORDER NO'
          WRITE: 25 TEMP_DATE_STR." UNDER 'DATE'.
          FORMAT COLOR OFF.
*       FORMAT COLOR 2.
*                   WRITE: 44 TEMP_NETP_STR." UNDER 'NET PRICE'.
*       FORMAT COLOR OFF.
          FORMAT COLOR 3.
          WRITE:44 WA_VBAK-VKORG," UNDER 'SALES ORG',
         59 WA_VBAK-VTWEG," UNDER 'DIST CHANNEL',
         72 WA_VBAK-SPART." UNDER 'DIVISION'.
          FORMAT COLOR OFF.
          SKIP 1.
        ENDIF.
      ENDDO.
ENDCASE.
TOP-OF-PAGE DURING LINE-SELECTION.
CASE:SY-LSIND.
    WHEN 1.
      FORMAT COLOR 6.
      WRITE:/8    'SALES ORDER NO.',
             25   'DATE',
*       44   'NET PRICE',
             44   'SALES ORG',
             58   'DIST CHANNEL',
             72   'DIVISION'.
      SKIP 1.
      FORMAT COLOR OFF.
<b>if helpful reward some points.</b>
Message was edited by:
        suredarreddy pulimamidi

Sorting and Grouping by multi-value Choice columns - any options?

I found out the hard way that SharePoint doesn't support sorting or grouping lists by Choice columns that are set to "Allow Multiple Values." I'm stunned by this missing capability, and my project has come to a complete halt without it. It's like Microsoft only implemented hafl the feature -- you can put data in, but then you can't do anything with it. You can't even use the column in a formula in another column, so you can't parse it.
I'm not posting just to gripe though. Does anyone have any suggestions for alternatives? What do you do when you need to let people make multiple selections, and then you want to sort or group by those values? Are there any add-on products that allow this? At this point my only option seems to be to not allow multiple choices, but that's taking away a rather significant feature.
Thanks for any ideas,
Steve

Hi Paul,
Thank you for the reply and the additional questions. For my situation I want to use the multi-value choice to indicate a "belongs to" relationship, as in "this item belongs to projectA, projectB, and project C. Because there are more than 10 projects, I didn't want to create a separate Yes/No checkbox for each one.
For viewing the information, I'm looking primarily for a "group by" function. So if an item belongs to projectA, projectB, and projectC, it would appear three times, once under the grouping for each project. What I don't want is for a row that only belongs to projectA to be grouped separately from a row that belongs to both projectA and projectB. I want to see all the rows that belong to projectA grouped together, regardless of whether they also belong to other projects.
I'll look into using a grid control, but if you have any other suggestions I'll certainly listen.
Steve

Need help with select within select - daterange

I use Crystal Reports v12.3.0.601 - I am a beginner.
Problem:
TABLE: ACCOUNTBILLFEE
Columns are
FOLDERRSN
STAMPDATE
BILLNUMBER
PAYMENTAMOUNT
There are over 500,000 rows/ records...
And I need to report the FOLDERRSN which has at least one {ACCOUNTBILLFEE.STAMPDATE} in DateTime
(2014, 05, 01, 00, 00, 01) to DateTime (2014, 05, 31, 23, 59, 59)
Out-put required is:
FOLDERSN | STAMPDATE | BILLNUMBER   | PAYMENTAMOUNT
Group by FOLDERRSN
1010234               May01,2014                 1111                      25000
                              May25, 2014                1112                       5000
                              Jan 05, 2013                  998                          500
1034567                May5, 2014                11325                       5000
1033999                May15, 2014               6752                       15000
                              Dec5 , 2011                1132                       25000
Please help -
The critical part for me, is to display payments not within the date range in 'select expert' statement.
Currenlty my report reflects only payments for FOLDERRSN, where {ACCOUNTBILLFEE.STAMPDATE} in DateTime
(2014, 05, 01, 00, 00, 01) to DateTime (2014, 05, 31, 23, 59, 59) and not other payments outside the date range specified.
Thank you for your time.

Hi Abilash,
This worked !!!
My brother helped me with it here....ofcourse you have intiated the intial idea.
It worked when i used the following SQL at 'Add Command'
Select * from DATABASE_NAME.ACCOUNTBILLFEE A
Where A.FOLDERSN = any ( select B.FOLDERSN from DATABASE_NAME.ACCOUNTBILLFEE B
where B.STAMPDATE >= TO_DATE('20140501', 'YYYYMMDD')
AND B.STAMPDATE <= TO_DATE('20140531', 'YYYYMMDD'))
Excellent support - Thank you so much for your immediate attention and response.
I know, how hard it is to understand someones requirement and suggest solutions.
You are the best and most helpful I have ever come across in my life.
Thank you for your kind heart and extending help to me.
Regs,
Sridhar Lam

I want to display the narrative view as All Choices

Hi Experts,
If ‘All choices’ option is selected, I want to display the narrative view as All Choices.
How do I achieve it?
Waiting for your reply....
Regards,
Sathyan

Hi Sathyan,
Set a presentation variable for that prompt.
and in request, go to the column formula,
CASE WHEN '@{pv_var}' IS NULL THEN 'ALL CHOICES' ELSE col_name END
Regards,
Raghu

Display all selected variable values.

I have a requirement that a sales report restricted by a bill date range and a selected list of customers display all the customers selected even though a customer does not have a sale within the entered date range. Is it possible to have a characteristic display in a report without data?
Regards,
Craig Stephen

Thanks Snehithu2026 I already tried changing the Access type for Results Values on Customer to master data but this puts a blank result line in the report for customers without sales. Also if customer is not the first column all customers will display for each characteristic in the first column. I was hoping for another way to display selected customers without sales.
Regards,
Craig

Get selected values from checkbox group

Hi, I am working a jsf project on NetBeans 6 with the woodstock project and I want to save in a list or an array or something, the ids of the checkboxes that are selected into a checkboxgroup.Could someone explain to me the process of this?I am a newbie so I don't really know where to start.I'm guessing it has something to do with binding with beans but as I said I don't know how to do that..my code of the checkboxgroup in the jsp page is:
<webuijsf:checkboxGroup binding="#{Page1.checkboxGroup1}" id="checkboxGroup1" immediate="true"
items="#{Page1.personDataProvider.options['person.Name,person.Name']}" selected="#{RequestBean1.selected}"/>

RTFM or Google - choice is yours

How to implement tool-tip for the list items for the Choice column in SharePoint 2013

I had created a simple list with a "Choice" column, i have three entries in my drop-down,
First Entry
Second Entry
Third Entry.
If i select any entries in drop-down and hour-over (Second Entry), a
tool-tip need need to show.
Is it possible? If yes how to implement any help will be appreciated.

Hi,
We can use JavaScript to achieve it.
The following code for your reference:
<script type="text/javascript" src="/sites/DennisSite/Shared%20Documents/js/wz_tooltip.js"></script>
<script type="text/javascript" src="/sites/DennisSite/Shared%20Documents/js/jquery-1.11.1.min.js"></script>
<script type="text/javascript">
$(function () {
$("select[title='Choice']").change(function(){
Tip($(this).val());
$("select[title='Choice']").mouseout(function(){
UnTip();
</script>
Download wz_tooltip.js:
http://www.walterzorn.de/en/tooltip/tooltip_e.htm#download
Best Regards
Dennis Guo
TechNet Community Support

Need help in displaying a feed within my flex app

Hello guys,
I was hoping that someone can push me in the right direction. I am looking to display our feed within our Flex Application. I am using some of the sample from tour de flex
This is what I have so far:
<?xml version="1.0" encoding="utf-8"?>
<s:WindowedApplication xmlns:fx="http://ns.adobe.com/mxml/2009"
     xmlns:s="library://ns.adobe.com/flex/spark"
     xmlns:mx="library://ns.adobe.com/flex/mx"
     width="960" height="850">
     <fx:Script>
     <![CDATA[
          import flashx.textLayout.conversion.TextConverter;
          import flashx.textLayout.elements.TextFlow;
          import spark.utils.TextFlowUtil;
          XML.ignoreWhitespace = false;
     ]]>
     </fx:Script>
     <fx:Style>
          @namespace s "library://ns.adobe.com/flex/spark";
          @namespace mx "library://ns.adobe.com/flex/mx";
          @namespace components "components.*";
          s|WindowedApplication {
               background-color:#000000;
               background-alpha:"0.9";
          s|ButtonBar s|ButtonBarButton:upAndSelected,
          s|ButtonBar s|ButtonBarButton:overAndSelected,
          s|ButtonBar s|ButtonBarButton:downAndSelected,
          s|ButtonBar s|ButtonBarButton:disabledAndSelected {
               chromeColor: #00529c;
               color: #FFFFFF;
          s|ButtonBar {
               chromeColor: #053867;
               color: #FFFFFF;
     </fx:Style>
     <fx:Declarations>
          
          
          <fx:XML id="srv" source="http://feeds.feedburner.com/standforisrael/iWIn?format=xml" />
     </fx:Declarations>
     <s:ButtonBar dataProvider="{myViewStack}" y="175" height="35" width="700" />
     <mx:ViewStack id="myViewStack" borderStyle="none" x="0" y="209" width="700" height="500">
          <s:NavigatorContent id="home" label="Home">
          </s:NavigatorContent>
          <s:NavigatorContent id="about" label="About Us">
          </s:NavigatorContent>
          <s:NavigatorContent id="rabbi" label="Rabbi Eckstein">
          </s:NavigatorContent>
          <s:NavigatorContent id="rabbiCom" label="Rabbi's Commentary">
          </s:NavigatorContent>
          <s:NavigatorContent id="programs" label="Our Blog">
               <s:RichText id="rt5" width="280"
                    textFlow="{TextFlowUtil.importFromXML(srv)}" />
          </s:NavigatorContent>
     </mx:ViewStack>
</s:WindowedApplication>
Now when I run this I get a prompt that is telling me that if the program is already running to stop the program... I have no idea what program it is that i'm running that would prompt that type of dialogue box.
I also get these errors:
Unexpected processing instruction encountered and will be ignored. Found: type="text/css" media="screen" href="http://feeds.feedburner.com/~d/styles/itemcontent.css" IFCJ.mxml /IFCJ/src Unknown Flex Problem
Unexpected processing instruction encountered and will be ignored. Found: type="text/xsl" media="screen" href="/~d/styles/rss2full.xsl" IFCJ.mxml /IFCJ/src Unknown Flex Problem
Is there anything that I am not doing right here?
Any help would really be appreciated,
Thank You

I did try HTTPService but the problem that I was seeing was that I would need to push the information into a datagrid and that really doesn't help me witth presentation of the blog posts.
What if I create a custom component that takes the RSS feed and parses it into sections like so:
Title
Description
Link
Where lets say the title is like so:
[Bindable]
            public var title:String; <-- this is where I get stuck
<s:Label x="0" y="80"
        text="{title}"/>
I would like to also have that title wrapped in a url so that when the person is looking at our RSS they can click either the title or the read more link
What else can i do?

To display the selection screen variant name in WAD report output.

Hello experts,
I have a requirement which is to display the selection screen variant description in the output of the WAD report.
I managed halfway, by using the object "Information field", which displays all the values which are selected by the variant.
Example:I have created a cost center report created using WAD, since I need some graphical displays..
In the selection screen, I have the characteristic "cost center" as input field. I have created a variant " GM - IT" which will include few cost centers managed by GM. In the output, I want the dispaly to be "Cost center - GM IT". Currently it displays "Cost Center - a,b,c,d" as the values a,b,c,d are the values from the variant name "GM-IT"
Please let me know if this required any java script. I am not familiar with java / html codes and any help would be much appreciated (and rewarded)
Thanks in advance
KS

Hi,
Try this.
If you want to include your variables in your WAD means you have to choose "Force Variable Screen" option to be in enabled condition.
TO enable this,in WAD select your Template(New Template1) click the WEBITEM , it'll shows all generic properties , here you can enable this "Force variable screen"
Save and execute your WAD now you can get your variable screen.
Thanks,
JituK

Displaying Information selected within a Checkbox Choice column on a separate line

Similar Messages

Maybe you are looking for