DK31 via USB PC

I forget about the warning in DK31 Manual and use DK31 with usb pc for a week. I concern about effect to my z1, Is my device will damage or have any problem. PLEASE HELP ME. I am very serious.
Sorry my bad English

No worries, it just doesnt receive enough power

Similar Messages

When iPhone 5s is connected via USB no audio is heard

Hi There -
I've seen older threads on this issue but I don't think I've really come across any solutions. My issue started yesterday; now before reading further I have to ask that you please keep in mind that I did perform the latest upgrade on my iPhone a bit earlier in the day.
When I connect my iPhone to my vehicle sync system and announce that I'd like to connect via USB, the voice recognition repeats my request and then the music on my iPhone shows to be playing on the display in my vehicle. The problem is that though the music appears to be playing and the minutes played are being displayed there is no audio coming through. When I switch to the Bluetooth Audio option all sound comes through.
Now, as a 2nd test, we connected my sons iPhone 5s via USB (he has not taken the latest update on his iPhone) and the same issue happens with his. Voice recognition changes to the USB format as requested, music appears to be playing but no audio is heard. When we change his phone to Bluetooth Audio the audio comes through nice and clear.
I'm not entirely convinced the update caused the issue so I wanted to put this out there to see if anyone has run into this and were able to actually resolve the issue.
I know the USB cable is working fine because when I do plug it into either phone the phone makes the little connection sound and pops up a brief battery percentage box. I also know the cable is working because when we announce USB as our audio of choice the system recognize USB via the iPhone.
One other thing I tried looking for was the option on the phone to switch from Docked to Synch - I know on my iPhone 4 I was able to switch back and forth through iTunes and would also have the option if I tried to watch anything via You Tube when connected to the dock; I cannot find this anywhere on the 5s when connected via USB.
Help is greatly appreciated!!!

I have had similar troubles with wifi.. some improvement removing BlackBerry desktop software & drivers & reinstalling after reboot... I used the same installer I had previously, but a fresh downloaded installer couldn't hurt...
10.3.1 SW .1779 OS .2726 WLAN .1.1 Radio .2727

How do I use my iphone 4S wifi on my laptop via USB cable

Hi with my HTC when I connected it to my laptop via USB cable a list of options came up on my phones screen and one of them was to tethering. But when I do the same with my iPhone no options come up on my screen, so how do I use my iPhones wifi on on my laptop useing a USB cable?
Any help would be gratefully appreciated.
My laptop runs on windows vista and my iPhone 4s has the latest updates.

I want to use my home wifi signal to tether my iPhone to my laptop via USB ,as my laptops wifi card is broken. It worked ok with my old HTC desire as when I can extend it to my laptop it had a list os options of what you wanted to do and one of them was tethering, as I'm useing my home wifi I don't need to worry about my data usage. But thank you for responding.

HP Deskjet 2540 - connect to pc via USB, can I print from android tablet as well?

Hi,
I've just bought a HP Deskjet 2540 all in one printer.
I have set it up via USB connection to my windows 7 pc, and it is printing fine.
I also have an android tablet. Can I also print from this whilst using the printer via USB on my pc.
Any help on if this is possible and what steps I need to do if it is would be appreciated (I have been reaeding the help section on the website but I am just getting more confused).
Lesley

Hi @Lesley54R,
You don’t need to have the printer listed with the two different connections unless you’ll be switching back and forth from being connected by USB cable and wireless. You can delete the one you don't think you'll be using.
To print the web page, please use the browser found within the app. I’ve included the ePrint Mobile App FAQs document for your reference.
In addition I’ve also included the ePrint Product Specifications document. This document has the list of supported email programs, file types and print limitations.
Hope this helps!
Regards,
Happytohelp01
Please click on the Thumbs Up on the right to say “Thanks” for helping!
Please click “Accept as Solution ” on the post that solves your issue to help others find the solution.
I work on behalf of HP

HP Deskjet 3550 cannot print using Airport Extreme via USB connection on Windows 7 64 bits

Product Name and Number: HP Deskjet 3550 Inkjet Printer
Operating System installed: Windows 7 Home Premium 64 bits
Error message: None
Any changes made to your system before the issue occurred: Setting up HP printer using Airport Utility to add a new printer and installed Bonjour Print Wizard.
Problem: My printer is already set up using Airport Utility. When I print something, the printer doesn't do anything. Is there something I haven't done lately in order to get this printer working using my wifi router?
Suggestion #1: Are the print jobs getting stuck in the print queue? You can check this by clicking on the printer icon in your task tray by the clock.
Error Message #1: Yes, the print job got stuck in the print queue, but the moment, it disappeared from the print queue and the printer doesn't print at all. This is frustrating.
Suggestion #2: Does the printer work as expected if you connect it directly to the PC via USB?
Error Message #2: Yes, the printer works if I connect it directly to my PC via USB, but I don't understand why it wouldn't work with the wifi router, though.
Suggestion #3: This has to do with the way the router handles the connection to the printer. I found another thread, regarding this issue, and it has some information that may help resolve it.
http://h30434.www3.hp.com/t5/Printer-Networking-and-Wireless/Print-Problem-Using -USB-Printer-on-Airp...
If that does not help, I would recommend posting on the Apple forums, as they may have more expertise with the router's abilities:
https://discussions.apple.com/community/wireless/airport
Error Message #3: After clicking on the first link that you posted, it was very helpful, but the printer couldn't print completely and somehow it would stop at the quarter of a paper. It looks incomplete when I took it out from my printer. It does that every time.

UPDATE!
Problem solved! So this is just a followup in case someone else ever stumbles into these boards with the same or similar problems as mine, that is, trying to run an HP Deskjet D1500 series printer [mine's a D1520] on an Airport Extreme wifi router's USB port as a network printer [with the Airport Extreme controlled by an ancient G4 PowerMac Quicksilver currently running OS X 10.4.11).
Although it probably SHOULDN'T matter, since this type of printer works fine with just the Tricolor cartridge as shipped when hooked up directly to a computer's USB port, on a hunch I got a black HP cartridge (that's a type 21, not type 22 as I had earlier said), slapped it in, tried a test page, and all's well. So, we can call off the technoid hounds. Everything running perfectly.
I hope this message in a bottle may help someone else out there some day soon who may be scratching his or her head with a similar stumper. And just to recap those important Windows printer settings, they are:
* [Printer Properties--> Ports--> Add New Port...] "Standard TCP/IP Port"
* [Configure Port] IP Address "10.0.1.1" and Port "9100"
Best of luck!
Bilgey

New MBP internet tethering to 3GS iphone via usb - not bluethooth?

I have a new MBP 10.5.7 & a month old 3GS iphone.
I have set up internet tethering successfully & use it regularly.
The only "problem" is that i can only connect via bluetooth - not usb.
Im aware that you can internet tether via usb but dont know how to do it.
Any help would be appreciated
thanks

wow - posted almost a month ago & not 1 response...

WHEN I USED TO CONNECT INTERNET FROM MY IPHONE 4S PERSONAL HOTSPOT VIA USB, AN ICON IN THE NETWORK PREFERENCE NAMED "IPHONE" GETS OPENED.... BUT NOW THIS IS NOT HAPPENING AND I AM NOT ABLE TO CONNECCT PERSONAL HOTSPOT VIA USB CABLE. PLEASE HELP ME OUT

WHEN I USED TO CONNECT INTERNET FROM MY IPHONE 4S PERSONAL HOTSPOT VIA USB, AN ICON IN THE NETWORK PREFERENCE NAMED "IPHONE" APPEARS.... BUT NOW THIS IS NOT HAPPENING AND I AM NOT ABLE TO CONNECT PERSONAL HOTSPOT VIA USB CABLE. PLEASE HELP ME OUT???

Please don't shout! Using all uppercase means shouting on the internet. If your keyboard is stuck please say so, otherwise people will think you are being obnoxious.
Now the first question is, when you are saying connecting to personal hotspot, have you always been using the iPhone to connect to the internet? Are you someplace where the only place to connect is available via tethering to the iPhone's celluar network? Or do you have other options?

I am trying to connect a Windows 7 / 64 bit to an Epson printer on my Mac. The printer is hooked into the Mac via USB; the Mac is networked to a Linksys wireless router with an ethernet cable, as is the Windows box. Any tips on how to do this?

I am trying to connect a Windows 7 / 64 bit to an Epson printer on my Mac. The printer is hooked into the Mac via USB; the Mac is networked to a Linksys wireless router with an ethernet cable, as is the Windows box. I installed the current Bonjour printer services software on the Windows machine, and separately installed the driver software for the Epson printer on the WIndows machine. Running the bonjour wizard, I get an alert saying 'I don't have sufficient access to my computer to connect to the selected printer'.
The printer has 'sharing' turned on from the Mac end; this works with a Powerbook via the wireless connection. Sharing is also turned on in the Windows printer control panel for this printer (under properties). The Mac is a G5 running 10.5.8. When I try to print a page from the Windows machine it gets hung in the print queue.
Any advice how to proceed would be appreciated!
thx,

I am trying to connect a Windows 7 / 64 bit to an Epson printer on my Mac. The printer is hooked into the Mac via USB; the Mac is networked to a Linksys wireless router with an ethernet cable, as is the Windows box. I installed the current Bonjour printer services software on the Windows machine, and separately installed the driver software for the Epson printer on the WIndows machine. Running the bonjour wizard, I get an alert saying 'I don't have sufficient access to my computer to connect to the selected printer'.
The printer has 'sharing' turned on from the Mac end; this works with a Powerbook via the wireless connection. Sharing is also turned on in the Windows printer control panel for this printer (under properties). The Mac is a G5 running 10.5.8. When I try to print a page from the Windows machine it gets hung in the print queue.
Any advice how to proceed would be appreciated!
thx,

HT201210 I'm trying to update my iOS to 6.0, using iTunes (with my 4s connected via USB and WiFi is on also). I get a message that 'there are purchased items on my iPhone that have not been transferred to my iTunes library. Yet, I can't find those items!

I'm trying to update my iOS to 6.0, using iTunes (with my 4s connected via USB and WiFi is on also). I get a message that 'there are purchased items on my iPhone that have not been transferred to my iTunes library. Yet, I can't find those items! Help! There is not error message number just the text message. I've searched for an answer but have found nothing on "transfering items purchased to your iTunes library".

Right click on your device icon on the left pane of iTunes and click on transfer pur....

TS2776 iPhone 5, Outlook 2013, Windows 7.0 64-bit. Every time I connect my phone to my computer via USB, iTunes opens with the "accept our terms and service" then deselects the boxes checked under the INFO tab to sync my calendars, contacts...help?

I am connecting my iPhone 5 to my Windows computer via USB. This should open iTunes and start the sync process. Instead of iTunes opening, I get the iTunes service agreement to which I must agree. Then iTunes opens and begins to back up my phone. It is syncing my photos and music (although the music thing is another nightmare), but under the "info" tab in iTunes, the boxes of which functions I want to sync are no longer selected. Hence the computer and the phone are not sharing information. When I select the functions I want to sync, I must either replace or merge. If I replace, I lose the information I recently put into my phone. If I choose to merge, then I have duplicates of everything.
How can I resolve this problem? Why is iTunes acting like it doesn't know my phone?
I'm using an iPhone 5 iOS 6.1.4, Windows 7 64-bit, Outlook 13, and the must current version of iTunes (because I've removed and reinstalled it twice already).
Thanks for any help!
Christine

After you'd run the Configure Classic instance did you run in the statement as stated in 'Oracle® Fusion Middleware Installation Guide for Oracle Portal, Forms, Reports and Discoverer 11g Release 1 (11.1.1) Part Number E10421-05'?
java -classpath ORACLE_HOME_DIR\discoverer\lib\disco-config.jar;ORACLE_HOME_DIR\oui\jlib\OraInstaller.jar;ORACLE_HOME_DIR\opmn\lib\iasprovision.jar -Djava.library.path=ORACLE_HOME_DIR\oui\lib\win32 oracle.disco.install.config.DiscoUtil -oraclehome ORACLE_HOME_DIR -tnsadmin TNS_ADMIN_DIR
I've completed an installation with the same steps (although I ran the config.bat file in as_1/bin rather than from the program files list and also I've the jrockit jdk installed)
I've found that this fails with the error;
INFO: This tool works only on Windows Platform. Exiting the program
Which is strange considering this is Windows Server 2008 R2 64-bit
DISCO is running in the EM console but the URLs (as defined in the installation summary report) do not resolve properly. I was just interested to hear if you're installation was the same, this isn't the first installation I've done, they've all had a similar issue

I can't get my Windows 7 pc to recognise my old LG VN251 phone via USB.   The verison software upgrade assistant runs and my phone is up to date.   I do get a window that pops up that says I can either run the bootstrap or look at the files on the phone,

I can't get my Windows 7 pc to recognise my old LG VN251 phone via USB.   The verison software upgrade assistant runs and my phone is up to date.   I do get a window that pops up that says I can either run the bootstrap or look at the files on the phone, but I cannot see any photos.   Thoughts?

We want to make sure we move your pictures to your computer schpee! Do you have a memory card on your phone? If your pictures are not on your http://vz.to/1OvJVey memory card we would want to move them. After you move them than try http://www.verizonwireless.com/support/knowledge-base-45147/ to move them to your computer. Keep us posted.   AmberF_VZW Follow us on Twitter @VZWSupport If my response answered your question please click the "Correct Answer" button under my response. This ensures others can benefit from our conversation. Thanks in advance for your help with this!!

How do I print from wifi-connected MacBook Pro to printer connected via USB to Win7 PC?

This is really frustrating, and I did not think that anything could be this difficult on a Mac. I have a Windows 7 Home Premium desktop PC connected via ethernet cable to wireless router, and a printer connected to the PC via USB. I recently bought my first ever Mac - a MacBook Pro, which is connected via wifi through the same router. All I want to do is to print files from the MacBook Pro on the printer connected to the PC. I have spent a LOT of time searching all over the web. Have tried some 2 or 3 different methods but none of them work for me, e.g. I shared the printer on the Win7 desktop and then added the printer on the MBP with the IP option with LPD/LPR Protocol, after enabling LPD Print Service on the PC. The printer gets added but when I give the command to print from the Mac, the print job shows up on the printer queue but the "Printing" soon changes to "Error Printing" (or something like that) and nothing gets printed. Then, I have to switch off the printer, remove the print job from the queue and switch on the printer again to get it out of the error state.
I also tried setting up the printer on the MBP using CUPS Admin interface, i.e. localhost:631. Again, printer gets added but document does not print. The third way I tried to add the printer was using the Windows option in the Add Printer dialog, and typing in an smb: URL but no luck with that, either.
Please, can anyone help me? This is driving me crazy
Oh, and the devices are:
1) Windows 7 Home Premium Desktop PC
2) MacBook Pro running OS X Mountain Lion
3) HP Deskjet F2110 printer
Thanks...
- Ajoy

First Install Bonjour for Windows on your Windows machine. This will allow the printer to be discovered.
http://support.apple.com/kb/DL999
Then use this article:
OS X Mountain Lion: Set up a printer shared by a Windows computer via SMB/CIFS

Job stops (HP DJ 3550 connected to AEX via USB)

Hi everybody,
Here is the setup:
1- PB G4 15" w/ MacOS X 10.4.2 uptodate w/ Airport Extreme card installed
2- Airport Express base (firmware 6.2) setted using Airport Admin Utility 4.2:
- Home router
- WAN: ADSL modem connected using PPPoE
- USB: HP DeskJet 3550 (recognized by system)
- Network managed by DHCP & NAT
- No Port Mapping, no Access Control, no WDS, no Music
3- HP DeskJet 3550 connected via USB to AEX
4- Printer added to PB using Printer Setup Utility V4.1 (157.2):
- hp deskjet 3500, connected through Bonjour
- Driver HP Inkjet 2.7.1
From whatsoever application I print, it starts the job in the printer queue then stops (msg Jobs stopped).
I included the console file for the experts...
I tried reset, driver, update... you name it, it still doesn't work.
It works using the USB and a Airport Extreme Base Station.
I know that this printer is not in the compatibility list, but it really works with my AEBS!!
Any help would be very appreciated as I am completly clueless...
Thank you in advance... Pascal

Hi Chris, thank you for the update and the trick.
I have also some (good) news on my side.
I tried the same as you did (restarting/reseting the AEX several times) and, effectively, the printer worked... until it stopped again a few prints after.
So I went with the hard way (no, it is not throwing the AEX by the window).
I installed the HPIJS and declared the printer as a network component with an IP address (like if it has a JetDirect). Now the problem is definitly fixed.
Here are the steps:
(see also page http://www.ifelix.co.uk/tech/1300.html)
go to page http://www.linuxprinting.org/macosx/hpijs/ and download both softwares:
- hpijs-foomatic-2.0.2.ppc.dmg
- espgs-7.07.1.ppc.dmg
Install them.
Go to Printer Setup Utility
Add a new printer
Select IP Printer
Select Protocol HP Jet Direct - Socket
Enter address: 10.0.1.2 (or the address of your AEX)
Queue: leave blank
Name: HP DeskJet 3550 - HPIJS (or the name you want)
Location: Airport Express Base (or the location you want)
Print using: HP
Select model: HP DeskJet 3550C HPIJS (or your model)
Set the printer as default if necessary

IOS devices not recognized in iTunes via USB

I am on a Windows 7 x64 home-built computer and I am pretty technically inclined, but this one problem has been bugging me for quite a while now.
I am pleased that Apple wants its devices to sync wirelessly with iTunes from now on, but there are times when it is necessary to plug in the device via USB, such as when transferring large files.
However, in the last few weeks/months, I have noticed that iTunes will not recognize my iPhone 4 nor my iPad 2 when they are plugged in via USB. The computer recognizes the devices, drivers are installed properly, and I can see the devices in Windows Explorer, getting photos off of them that way. However, iTunes does not show the devices with that "plugged in" icon next to them, only the usual sync/eject icon.
This is also a problem because sometimes iTunes just won't "see" the devices, but sometimes it will. Regardless, I need to be able to tether them sometimes for transferring relatively large files via USB. Wi-Fi just isn't fast enough. I suppose I may have to disable Wireless syncing altogether, but I fear that may not fix the problem, because it was syncing via USB just fine in the early weeks of iOS 5 and with wireless syncing enabled. I do have the latest iTunes, I do have the latest firmware for both devices, and I have rebooted both my computer and the devices several times lately, all without effect.
I've done all the simple solutions and none of them have worked. Can anyone explain what's going on and, more importantly, what I can do about it?

Yeah, I've tried 5 out of the 7 steps shown in their troubleshooter. The sixth step is one that is a major pain and I doubt would fix the problem: Reinstall iTunes. I know enough about PCs to feel about 80% confident that this step would not fix the issue. Plus, it's a major hassle with re-adding music to the collection. Nevertheless, I will look at it as a last ditch effort.
The seventh step is extremely vague and doesn't really help. "There might be a software conflict." Fine, but there's no way to find any such conflict, if one even exists in the first place, without a heavy dose of trial-and-error, several hours of time, dozens of reboots, and the patience of Job.
However, they do list some other steps that I'll try when I get home, such as making sure certain services are installed and running. I'll post my results here. Thanks, wiclee.

IPhone 5 contacts local sync via usb doesn't work - updated

Syncing an iPhone 5, AT&T 64GB, with Macbook Air 11" mid-2011, 1.8GHz / 4GB.
OS X 10.10.2; iTunes 12.1.0.50; iOS 8.1.3.
I am trying to sync my contacts from my OS X Contacts App to my iPhone 5 via USB. The contacts do not sync. The contacts are local, "on my mac". I am using a usb cable through iTunes.
The iPhone 5 was just restored by Apple Configurator, set up as new iPhone, and is supervised by the MacBook Air.
I am also synchronizing my local Calendars from the OS X Calendar app; these transfer just fine. This makes me think it is probably not to do with the entire setup of the iPhone, i.e. that it is managed by apple configurator, since some of the sync works correctly.
Under "info" in the iTunes sync dialog, I have selected the "sync contacts" and "all contacts" and "sync calendars" and "all calendars" options.
Interestingly, while the Calendars sync options displays options of "selected calendars" and a list of my calendars available to sync, the Contacts section "selected groups" is grayed out. I have one group in Contacts, and it does not show up by name for "selected groups". Instead, the area where groups should be listed for selection is empty. Perhaps iTunes does not have access to my local contacts? It is not listed under apps with access to my contacts under security and privacy, and it has not requested access to my contacts.
I created a fake contact on the phone and synced it with iTunes. I then turned off contact syncing in iTunes and told it to remove previously synced contacts. The fake contact disappeared. When I turned contact syncing on again, the contact was again pushed to the phone. However, the fake contact did not appear at any point in the OS X Contacts App, and none of my OS X Contacts appeared on my phone -- only the fake contact I had created on my phone and then synced with iTunes.
I also created a (different) fake contact in OS X Contacts. iTunes sync did not transfer this contact (or any others) from OS X Contacts to iPhone.
SUMMARY:
- syncing iPhone 5 via USB with iTunes
- Calendar sync works
- Contacts sync doesn't work
- iTunes appears to have no communication with the OS X Contacts app; in system prefs > security and privacy > privacy > contacts, Pages and Word have access to Contacts, but iTunes is not listed. iTunes Contacts sync "selected groups" does not display my OS X Contacts group names.
- Contacts created on iPhone sync back to iTunes and are restored back to the iPhone if deleted and resynced.
- Contacts created on iPhone do not sync back to OS X Contacts; Contacts in OS X Contacts do not sync to iPhone.
(apologies for premature posting to "Using iPhone"; I accidentally submitted and now can't delete or edit).

Here's the resolution: I went to my local Apple store and spoke to the guy. After some discussion it turned out that one of the staff had had a similar problem. He suggested this course and I can report that it seems to work. So, (1) open your system preferences and then the print & fax setting and delete the printer in question (2) disconnect the USB between the printer and the TimeCapsule (3) shut everything down and turn off power to your modem, your TimeCapsule and your whole system (4) power on each item in its normal sequence (5) wait for your iMac to complete its boot-up, (6) re-connect the USB between the printer and the TimeCapsule (7) open system preferences and search for and install the relevant printer (8) try printing.
This is hardly elegant, but it worked. I am told (by the same Apple store) that hitting the "reset" button in the TimeCapsule might also work. If this is intuitive or obvious to anyone else then my compliments to them ...
Cheers
OzHutz

DK31 via USB PC

Similar Messages

Maybe you are looking for