Dll issue, works in release.exe but not in debug mode.

I have an issue with a dll that was previously working in both released and in debug mode. Now if I create a released .exe it functions. If I run it in debug mode the call to the dll function never returns. eventually whatever is occurring behind the scense prevents the released.exe from working also. I do not know if I accidenatally changed a setting in the cvi compiler that broke the code. Is there a way to default cvi2010 settings?

You can go back to the default ADE settings by renaming the following registry key to something else (anything other than "10.0", it doesn't matter what):
[HKEY_CURRENT_USER]\Software\National Instruments\CVI\10.0.
I think it's best to rename it, rather than delete it, so that you can go back to your current settings any time you choose to. Make sure CVI is not running when you rename the key.
After the rename, the first time you run CVI, it will prompt you if you want to copy the settings. Say no to that. At that point, CVI will create a new "10.0" key with the default settings in place.
Once you're done with your investigation, if you prefer to go back to the settings you had, you can delete the new 10.0 and rename the previous key back to "10.0".

Similar Messages

IMPORT issues: Works with iMovie 3 but not iMovie 6 ???

Okay, still trying to get my import issue resolved.
I have a SONY HDR-HC3 DVmini.
No problems with iMovie 3 on my Powerbook.
iMovie 6 on my MDD will let me control the camera, but the screen stays BLUE with no IMPORT.
My buddy thinks it might be a Quicktime issue.
He said to download Quicktime Pro, that might resolve this issue.
I can copy the iMovie 3 file to my machine with iMovie 6 and do the editing, just not the importing...
THANX

Hi
Can be so much.
Often Camera has to be connected to Charger/mains during Capture.
An majority is a faulthy - badly connected FW-Cable (USB don't work at all)
My list on this
*NO CAMERA or A/D-box*
Cable
• Sure that You use the FireWire - USB will not work for miniDV tape Cameras
FireWire - Sure not using the accompany USB-Cable but bought a 4-pin to 6-pin FW one ?
• Test another FW-Cable very often the problem maker.
Camera
• Test Your Camera on another Mac so that DV-in still works OK
• Toogle in iMovie pref. Play-back via Camera (on<->off some times)
• Some Cameras has a Menu where You must select DV-out to get it to work
• Camera connected to "charger" (mains adaptor) - not just on battery
Does Your Camera work on another Mac ?
Sorry to say it is to easy to turn the 6-pin end of the FW-cable 180 deg wrong.
This is lethal to the A/D-chip in the Camera = needs an expensive repair.
(Hard to find out - else than import/export to another Mac ceased to work
everything else is OK eg recording and playback to TV)
Connections
• Daisy Chaining most often doesn’t work (some unique cases - it’s the only way that work (some Canon Cameras ?))
Try to avoid connecting Camera <--> external HD <--> Mac but import directly to the Mac then move
the Movie project to dedicated external hard disk.
Mac
• Free space on internal (start-up) hard disk ? Please specify the amount of free space.
(Other hard disks don't count)
I go for a minmum of 25Gb free space for 4x3 SD Video - and my guess is 5 times more for 16x9 HD ones
after material is imported and edited.
SoftWare
• Delete iMovie pref file may help sometimes. I rather start a new account, log into this and have a re-try.
• Any strange Plug-ins into QuickTime as Perian etc ? Remove and try again.
• FileVault is off ? (hopefully)
Using WHAT versions ? .
• Mac OS - X.5.4 ?
• QuickTime version ? (This is the heart in both iMovie and FinalCut)
• iMovie 8 (7.1.?) ?
• iMovie HD 6 (6.0.4/3) ?
*Other ways to import Your miniDV tape*
• Use another Camera. There where tape play-back stations from SONY
but they costed about 2-4 times a normal miniDV Camera.
• If Your Camera works on another Mac. Make an iMovie movie project here and move it
over to Your Mac via an external hard disk.
(HAS TO BE Mac OS Extended formatted - USB/DOS/FAT32/Mac OS Exchange WILL NOT DO)
(Should be a FireWire one - USB/USB2 performs badly)
from LKN 1935.
Hi Bengt W, I tried it all, but nothing worked. Your answer has been helpfull insofar as all the different trials led to the conclusion that there was something wrong with my iMovie software. I therefore threw everything away and reinstalled iMovie from the HD. After that the exportation of DV videos (there has not been any problem with HDV videos) to my Sony camcorders worked properly as it did before. Thank you. LKN 1935
from Karsten.
in addition to Bengt's excellent '9 yards of advice' ..
camera set to 'Play' , not rec/computer/etc.?
camera not on battery, but power-line?
did your Mac 'recognize' this camera before...?
a technical check.
connect camera, on, playback, fw-connected...
click on the Blue Apple, upper left of your screen ..
choose 'About../More..
under Firewire.. what do you read..?
More
• FileVault - Secure that it’s turned off
• Network storage - DOESN’T WORK
• Where did You store/capture/import Your project ?
External USB hard disk = Bad Choise / FireWire = Good
If so it has to be Mac OS Extended formatted
----> UNIX/DOS/FAT32/Mac OS Exchange is NOT Working for VIDEO !
mbolander
Thanks for all your suggestions. What I learned is that I had a software problem. I had something called "Nikon Transfer" on my Mac that was recognizing my Canon camcorder as a still camera and was preventing iMovie from working properly. After uninstalling Nikon Transfer and doing a reboot, everything worked great.
I never liked the Nikon Transfer software anyway--I guess I'll get a cheap card reader and use that to transfer photos in the future.
*No Camera or bad import*
• USB hard disk
• Network storage
• File Vault is on
jiggaman15dg wrote
if you have adobe cs3 or 4 and have the adobe bridge on close that
or no firewire will work
see if that halps
DJ1249 wrote
The problem was the external backup hard drive that is connected, you need to disconect the external drive before the mac can see the video camera.
Yours Bengt W

Auto numbering issue works fine in IE8 but not works in IE7 word apps plugin

Hi,
I have uploaded a word template on Share Point 2010 environment. In the view mode I am able to see the automated numbering however when I am
trying to select the edit mode, I cannot see the same behavior in IE7 means that the number format is disappear.But when copy text from the edit mode and paste it into local document it show the numbering.
It's working fine in IE8 .
Thanks in advance.

Hi SatyaMogalaou,
Whether this issue occurred on other machines with IE7.
Please set the site to Compatibility view on IE7, compare the result.
If this issue still exists, I suggest you update your IE 7 to IE 8+ for your SharePoint 2010.
I hope this helps.
Thanks,
Wendy
Wendy Li
TechNet Community Support

Web part throwing exception at run time but not in debug mode

The below code is throwing exception at run time but does not throw exception while debugging in Visual Studio. This is really causing difficulty for me to detect the cause of exception. Below I have also placed the exception image for reference.
namespace CheckforContractorLogin.VisualWebPart1
public partial class VisualWebPart1UserControl : UserControl
protected void Page_Load(object sender, EventArgs e)
if (!IsPostBack)
string loginName = string.Empty;
string coc_url = string.Empty;
SPQuery spQuery = new SPQuery();
spQuery.Query = "<Where><Eq><FieldRef Name='LoginName' /><Value Type='Text'>" + currentUser + "</Value></Eq></Where>";
Guid _spSiteID = SPContext.Current.Site.ID;
Guid _spWebID = SPContext.Current.Site.OpenWeb().ID;
SPSecurity.RunWithElevatedPrivileges(delegate()
using (SPSite _spSite = new SPSite(_spSiteID))
using (SPWeb _spWeb = _spSite.OpenWeb(_spWebID))
//if user has already accepted the COC
SPList getSPList = _spWeb.Lists["RedirectUrl"];
SPListItemCollection getspItemColl = getSPList.Items;
foreach (SPListItem item in getspItemColl)
if (Convert.ToString(item["Title"]) == "Policy Acceptance")
coc_url = Convert.ToString(item["Url"]);
SPList spList = _spWeb.Lists["Policy Acceptance Status"];
SPListItemCollection spItemColl = spList.GetItems(spQuery);
bool result = getADUserInfo();
if ((spItemColl.Count == 0) && (result))
Response.Redirect(coc_url);
protected string currentUser
get
string currentUser1 = HttpContext.Current.User.Identity.ToString();
int index = currentUser1.IndexOf("\\") + 1;
string currentLoginUser = currentUser1.Substring(index);
return currentLoginUser;
protected bool getADUserInfo()
DirectoryEntry dentry = null;
DirectorySearcher dsearcher = null;
string ldap = string.Empty;
string empID = string.Empty;
string _empID = string.Empty;
try
Guid spSiteGUID = SPContext.Current.Site.ID;
Guid spWebGUID = SPContext.Current.Site.OpenWeb().ID;
SPSecurity.RunWithElevatedPrivileges(delegate()
using (SPSite elevatedSiteColl = new SPSite(spSiteGUID))
using (SPWeb elevatedWeb = elevatedSiteColl.OpenWeb(spWebGUID))
SPList spList = elevatedWeb.Lists["LDAP_Paths"];
SPQuery spQuery = new SPQuery();
spQuery.Query = "<Where><Eq><FieldRef Name='OU'/>"
+ "<Value Type='Text'>QD</Value></Eq></Where>";
SPListItem spItem = spList.GetItemById(1);
ldap = spItem["Path"].ToString();
dentry = new DirectoryEntry();
dentry.Path = ldap;
dentry.Username = "******\\sp_admin";
dentry.Password = "******";
dsearcher = new DirectorySearcher(dentry);
dsearcher.Filter = String.Format("(&(ObjectCategory=Person)(sAMAccountName=" + currentUser + "))");
SearchResult searchResult = dsearcher.FindOne();
dentry = searchResult.GetDirectoryEntry();
if (searchResult != null)
if (dentry.Properties.Contains("physicalDeliveryOfficeName"))
empID = dentry.Properties["physicalDeliveryOfficeName"][0].ToString();
if (empID.Contains("QA-"))
return true;
else
return false;
catch (Exception e)
throw e;
finally
dentry.Close();
dentry.Dispose();
dsearcher.Dispose();

Hi Zakir,
I am not sure but it would be nice if you can do following
Try search ULS log with correlation id and find exact error and share here. If not able to find do following
Or in catch block write
Response.Write(ex.ToString());
and check what exception its giving.

How do I troubleshoot installation/distribution of a LabVIEW .exe which processes data using Matlab when it works on some computers but not others?

I've been given the unenviable task of troubleshooting and installing/distributing software written by a former co-worker. I've modified the LabVIEW code and built an .exe file. I've successfully installed the Labview .exe file on several computers, but it won't work on some others. What's more baffling is that I installed it successfully on one computer, uninstalled it, and tried reinstalling it with no success. In fact, it's a new error (Dr. Watson for Windows NT application error). It doesn't help that I have different versions of LabVIEW and Matlab on the target computers. Some have LabVIEW 5.1, some
have 5.0, and some don't have it at all. Some have Matlab 5.2, some have 5.3 (R11) and some have 6.0 (R12). It's also not clear to me where the Matlab m files should be located. I'm not sure if it's a LabVIEW Runtime Engine problem, or if it's a Matlab problem. I've also wondered how LabVIEW and Matlab talk to each other. When LabVIEW calls Matlab, it seems that Matlab is running in the background. In other words, clicking on the Matlab Command Window and typing "whos" or any other command/variable doesn't work.

Jay del Rosario wrote:
>
> How do I troubleshoot installation/distribution of a LabVIEW .exe
> which processes data using Matlab when it works on some computers but
> not others?
Poke around zone.ni.com and
http://digital.natinst.com/public.nsf/$$Search/ .
Good luck, Mark

Flex mobile 4.6 app works inside flash builder but not in android emulator

Originally posted on stackoverflow: http://stackoverflow.com/questions/8663892/flex-mobile-4-6-app-works-inside-flash-builder- but-not-in-android-emulator
I have a basic flex mobile 4.6 app and it works fully fine in the flash builder built-in emulator using an android device profile like aria...
It also launches fine in the android emulator but one particular view shows blank (and this view works fine in flash builder).
Before I get in to many details of the view are there any categorical gotchas that can be causing this?
I can't seem to get the trace statements from the app to show in 'adb logcat'. It seems I need to compile a debug version of the apk but I don't know how to do this. I use the 'Export Release Build' from the Project menu in flash builder and it doesn't seem to have an option for debug=true.
The problematic/blank view basically uses the stagewebview and iotashan's oauth library to call linkedin rest apis... A different (and working) view can make restful web service calls in the emulator fine, so it doesn't seem to be an internet permission.
The source code contained in the problematic/blank view is almost identical to the tutorial found at:http://www.riagora.com/2011/01/air-and-linkedin/
The differences are: a) The root tag is a View b) I use StageWebView instead of HtmlContainer c) I use my own linkedin key and tokens.
I would appreciate it if someone can provide me with some pointers on how to troubleshoot this situation. Perhaps someone can tell me how to debug the app while running in the emulator (I think I need the correct adt command arguments for this which matches the 'Export Release Build' menu but adds the debug param?)
Thanks for your help in advance.
Comment Added:
I suspect that this has to do with connections to https:// api.linkedin.com and https:// www.linkedin.com. The only reason I can think of that the same code is not having issues inside of Flex Builder but indeed having issues in the Android emulator is something to do with certificates. Any ideas?

Thanks er453r,
I have created a project that clearly reproduces the bug. Here are the steps:
1) Create a UrlLoader and point it to https://www.google.com (HTTPS is important because http works but HTTPS does not)
2) Load it
3) Run in Flash Builder 4.6/Air 3.1 and then run in Android emulator. The former works with an http status 200. The latter gives you an ioerror 2032. I am assuming what works in Flash Builder is supposed to work in the Android Emulator and what what works in the emulator is supposed to work in a physical device (plus or minus boundary conditions).
I see a certificate exception in adb logcat but not sure if it's related...
Here is the self contained View code which works with a TabbedViewNavigatorApplication:
<?xml version="1.0" encoding="utf-8"?>
<s:View xmlns:fx="http://ns.adobe.com/mxml/2009"
                    xmlns:s="library://ns.adobe.com/flex/spark"
                    xmlns:mx="library://ns.adobe.com/flex/mx"
                    xmlns:ns1="*"
                    xmlns:local="*"
                    creationComplete="windowedapplication1_creationCompleteHandler(event) "
                    actionBarVisible="true" tabBarVisible="true">
          <fx:Script>
                    <![CDATA[
                              import mx.events.FlexEvent;
                              protected var requestTokenUrl:String = "https://www.google.com";
                              protected function windowedapplication1_creationCompleteHandler(event:FlexEvent):void
                                        var loader:URLLoader = new URLLoader();
                                        loader.addEventListener(ErrorEvent.ERROR, onError);
                                        loader.addEventListener(AsyncErrorEvent.ASYNC_ERROR, onAsyncError);
                                        loader.addEventListener(SecurityErrorEvent.SECURITY_ERROR, securityErrorHandler);
                                        loader.addEventListener(HTTPStatusEvent.HTTP_RESPONSE_STATUS, httpResponseStatusHandler);
                                        loader.addEventListener(IOErrorEvent.IO_ERROR, ioErrorHandler);
                                        var urlRequest:URLRequest = new URLRequest(requestTokenUrl);
                                        loader.load(urlRequest);
                              protected function requestTokenHandler(event:Event):void
                              protected function httpResponse(event:HTTPStatusEvent):void
                                        label.text += event.status;
                                        // TODO Auto-generated method stub
                              private function completeHandler(event:Event):void {
                                        label.text += event.toString();
                                        trace("completeHandler data: " + event.currentTarget.data);
                              private function openHandler(event:Event):void {
                                        label.text += event.toString();
                                        trace("openHandler: " + event);
                              private function onError(event:ErrorEvent):void {
                                        label.text += event.toString();
                                        trace("onError: " + event.type);
                              private function onAsyncError(event:AsyncErrorEvent):void {
                                        label.text += event.toString();
                                        trace("onAsyncError: " + event);
                              private function onNetStatus(event:NetStatusEvent):void {
                                        label.text += event.toString();
                                        trace("onNetStatus: " + event);
                              private function progressHandler(event:ProgressEvent):void {
                                        label.text += event.toString();
                                        trace("progressHandler loaded:" + event.bytesLoaded + " total: " + event.bytesTotal);
                              private function securityErrorHandler(event:SecurityErrorEvent):void {
                                        label.text += event.toString();
                                        trace("securityErrorHandler: " + event);
                              private function httpStatusHandler(event:HTTPStatusEvent):void {
                                        label.text += event.toString();
                                        //label.text += event.responseHeaders.toString();
                                        trace("httpStatusHandler: " + event);
                              private function httpResponseStatusHandler(event:HTTPStatusEvent):void {
                                        label.text += event.toString();
                                        trace("httpStatusHandler: " + event);
                              private function ioErrorHandler(event:IOErrorEvent):void {
                                        label.text += event.toString();
                                        label.text += event.text;
                                        trace("ioErrorHandler: " + event);
                    ]]>
          </fx:Script>
          <fx:Declarations>
                    
          </fx:Declarations>
          <s:Label id="label" y="185" width="100%" color="#0A0909" horizontalCenter="0" text=""/>
</s:View>

Site works in the app, but not in the browser.

Hello iWeb experts,
I've got problems.
Last night I published my site. And while it appears, and functions, properly in my iWeb app, it doesn't do the same in Safari, Firefox, and Internet Explorer.
Two issues...
FONTS
I chose Bellamie, Univers Condensed, and Marydale as my fonts. From reading these forums, I've discovered those won't wysiwyg on other computers if the fonts aren't available and open on them. So my two choices are to make every bit of text a graphic or to use a set of more universal fonts, correct? So my questions are...One, is there a list somewhere of fonts that will work in any browser? And, two, is there a short-cut, or easy way to transform type into a graphic without having to create image files?
FUNCTIONS
Here are the functions that work fine in iWeb but have gone haywire in all of the browsers I tested...
• The type in one nav link appears smaller than all the rest.
• Some links are active, others are not.
• Rollover highlighting works on some links, but not others.
• Most of the rollover links appear in the proper static color, a few do not.
I've tested these functions on three Macs, one PC, and in the three browsers mentioned above. All of them show the exact same problems. So something must be going wrong with iWebs coding, or my host server musn't like iWeb.
Any thoughts, suggestions on these two issues? Thanks much for any advice.
John
PS - For reference, see: www.johnrunk.com

Fascinating, Kirk (+he types with one raised eyebrow+).
QuickTimeKirk wrote:
When I drag across your page most of your links do not change. The "text" portion of them doesn't change, either. Something is covering them.
I can see that. But for the life of me, I don't know what could be covering those links. In my app, when I click in the area of the links, the type is the first item selected. Unless, possibly, it could somehow be the faint reflection of my black-and-white image (me & the ground I stand on). Hmmm...
QuickTimeKirk wrote:
Single click (outside the boundaries of your page contents) and an "outline" will appear. It shows the image file dimensions and locations.
This I don't see. An outline? As in "an object outline," or as in "a list of dimensions and locations?" When I click outside my page contents, I get nothing.
Thanks, QTK. I truly appreciate your troubleshooting here.
John

G4 iBook works in Safe Mode, but not in regular mode (stuck on blue screen)

14" iBook G4 1.2GHz with 1 gig of RAM.
I recently had an issue with this machine in that the image on the screen would freeze but the cursor would be able to move around. This was narrowed down to an issue with the logic board. I wanted something a little more permanent than a shim, so I sent the board in to have it reballed.
After installing the maching back into my iBook, it seemed to work fine until I applied a software update to the machine.
It was then that I got to experience the first of many kernel panics.
Restarting at different times always brought me to the dialog box which states that the machine needed to be restarted in multiple languages.
Running the Apple Hardware Test off my install disks yielded this error code: 2ATI/2/4:113-xxxxx-125
I have no idea what that means. I do know that just before I got the results of the test, the screen changed to all kinds of colors. It was only for a few seconds and then the results (with the error code) were displayed.
Still, not sure what to do next, I tried resetting the PRAM. I also tried resetting the NVRAM.
I also tried booting up into Safe Mode which actually worked. There were no issues with the machine and everything seemed to be working fine.
When I tried to restart the machine in regular mode, I'm taken to the infamous blue screen and the machine just stays there. When I let the machine stay off overnight, it booted up normal, but after applying the software update, the machine was in kernel panic again.
I've tried running fsck, but nothing changes.
I'm still not sure why it seems to work in Safe Mode but not in regular mode.
I'd appreciate any suggestions or ideas.

Hi,
A couple of the things that are disabled in safe mode are AirPort and non Apple startup items. The easiest thing for you to test is the AirPort card. Shut down and remove the AE card under the keyboard. See if it starts. If it does your AE card is bad. If not, start in safe mode and go to System Preferences>Accounts>youraccount and disable all non Apple startup (LOgin) items by clicking on them and then the minus sign. Restart normally and see if it will start.
John

Windows 8.1 64bit. Webcam works with "Camera" app but not with Skype.

I've spent a few hours googling and trying out various things - all listed below. I give up - any ideas??? OS: Windows 8.1 64bitMemory: 32GBWebCam: Microsoft VX-7000. As per subject - the webcam works with the "Camera" app but not with Skype for desktop or for Modern UI (or the Microsoft Lifecam software for that matter). Already attempted: 1) Uninstall webcam drivers - download latest from microsoft (Windows 7) and install in Windows 7 compatibility mode.2) Close (from taskmgr) anything that looks like it might use Webcam. 3) Run Skype for Desktop in Windows 7 and 8 compatibility modes None of the above work. In Skype for Modern UI the webcam doesn't appear in the drop down in Settings - so I can't even select it. In Skype for desktops (version 6.11.32.102) the webcam is found but instead of image I get "Can't start video. Try closing other programs that might be using your webcam". I see from a bit of googling that various people seem to have the same issue (i.e. Webcam works with Camera app but not Skype) - so I'm hopeful someone has found a workaround / fix to this issue and I've just not had the googling skills to find it Thanks, - Matt Symes

OK - I appear to have resolved the issue. I restricted my google terms to [vx-7000 site:microsoft.com "windows 8.1"] Which uncovered this article: http://support.microsoft.com/kb/933311 I noticed there were a couple of Windows 7 x64 specific registry settings that were mentioned so I checked these and they weren't as per the article. In fact - one of the Registry Keys was already used by other software "AI Charger+" which is some ValueAdd software that came with my motherboard. I uninstalled AI Charger+, uninstalled LifeCam driver. Reinstalled LifeCam driver in Windows 7 compatibility mode. Still not working. I returned to the registry and noticed the settings still differed from the above article. I corrected them (which involved not just amending Data but having to add new Values). I then disabled and reenabled the LifeCam from dvcmgmt.msc I was then able to get video from the webcam in the Skype for Desktop preview screen.

The screen on my iPhone is frozen and I can access apps through Siri. The touch screen works within the apps but not in the home screen. What do I do?

the screen on my iPhone is frozen and I can access apps through Siri. The touch screen works within the apps but not in the home screen. What do I do?

Have you tried a reset which is similar to a computer restart and is done by pressing and holding the home button and the sleep/wake or on/off button simultaneously until you see the Apple logo and then release?

My "places" in photos is working on my phone but not transferred to my iPad in Photo Stream even though the photos transfer. It used to work, so did I do something?

My "places" in photos is working on my phone but not transferred to my iPad in Photo Stream even though the photos transfer. It used to work, so did I do something?

OK Vicky, good clues...
See if this helps...
Open Keychain Access in Utilities, use Keychain First Aid under the Keychain Menu item, then either check the Password under that item, change it, or delete it and start over. See if there are duplicates, should be one for Incoming & one for Outgoing.
Resetting your keychain in Mac OS X...
If Keychain First Aid finds an issue that it cannot repair, or if you do not know your keychain password, you may need to reset your keychain.
http://support.apple.com/kb/TS1544

My firewire port works with ext hd but not with audio interface

2010 Imac 21.5 running 10.8.5. My firewire port works with ext hd but not with audio interface. The local authorized Apple tech said that I need a new motherboard, but my firewire ext drive works perfectly. I don't understand. Thanks.

You must go to the website of the audio interface manufacturer and look for, download and install updated drivers for the audio device you are using.
This is not, neccessarily, an Apple issue.

Fixed headers while scrolling works fine in bids but not when deployed to reportserver

Hi, I am using SQL Server 2008 R2 & deploying a report to reportserver with fixed headers while scrolling, this works fine in bids but not when deployed to reportserver. We are IE 9.
Thanks in advance...............
Ione

Hi ione721,
Since you have identified the 2 xml files are identical, according to my knowledge, there maybe a compatibility issue with IE 9 and SSRS 2008 R2, so I suggest that you could run the report in compatibility mode. Please make sure you have turned on Compatibility
View in Internet Explorer 9 by following steps:
When Internet Explorer recognizes that a webpage is not compatible, you will see the Compatibility View button on the Address bar. Try clicking it.
When Compatibility View is turned on, the button changes from an outline to a solid color when you view the page.
The following screenshots are for your reference:
If you have any questions, please feel free to let me know.
Best Regards,
Wendy Fu

BDC works in A-mode but not in N-mode. Why?

We recently upgraded from 4.6b to ERP6. I have a BDC that fails in ERP6 so I am trying to rework it. Something odd is happening. I find that some BDCs run through find in A-mode while you're stepping through them but not in N-mode when it's hands-off.
Here's the really odd thing. I have re-recorded a BDC against tran CO01 that creates a PP work order. I take the recording and product a function. I test the function with all of the default values intact accept for the new work order# and the function runs in A-mode. It FAILs in N-mode. It appears that ERP6 cannot run it's own BDC recordings.
I notice in A-mode that there are sometimes green info messages on the status line. What I'm wondering is if these are ok in A-mode because I can hit enter and move on vs. N-mode that perhaps gets stuck on them. I say that because I have seen BDCs fail and report in the MSGTAB information messages as though this is what caused the transaction to fail.
Is there some config setting in ERP6 that tells BDCs globally not to fail because of informational status messages?
Thank you.
Crew

Hi,
this may be an issue if you or the transaction is doing any updates on screens which may fail as call transaction by default updates in the asynchronous mode...
so try executing the call transaction in synchronous mode and then check if its giving you the same error message.
use
call transaction 'TCODE' using bdcdata mode 'N' update 'S'.
Regards,
Siddarth

Actionscript works in IDE,projector but not SWF

Hello, I'm atempting to create a swf that loads in a
controller swf and accesses some of the information contained
within the load swf. My main timeline is pretty simple.
var preloader_mc:MovieClip =
this.createEmptyMovieClip("preloader_mc",
this.getNextHighestDepth());
var labelcontainer:MovieClip =
this.createEmptyMovieClip("container", this.getNextHighestDepth());
var label:TextField = labelcontainer.createTextField("label",
1, 0, 365, 150, 20);
var TOCcontainer:MovieClip =
this.createEmptyMovieClip("TOCcontainer",
this.getNextHighestDepth());
var TOClabel:TextField =
TOCcontainer.createTextField("TOClabel", 1, 0, 300, 150, 20);
then I have an onenter frame function that access the
variable contained within the loaded swf.
loadMovie("xml_controller.swf", preloader_mc);
onEnterFrame = function () {
vTime =
this.preloader_mc.container.controlBar.timeView.label.value;
this.label.text = vTime
When I test the movie I see the time displayed and everything
is ok. When I create a projector file I see the time display. When
I try to run the swf, in a browser or straight from explorer All I
see is undefined for the values.
Anybody have any ideas why this would work in two
environments but not the third?

I saw this issue with a website I did. Sometimes the code
would work no problem in the projector but fail when I published to
the site.
Does the xml_controller.swf refer to _root anywhere? If you
have not locked the root and there is something it needs to access
locally it won't be able to find the item because the _root it is
referring to is now the load.swf movie

Dll issue, works in release.exe but not in debug mode.

Similar Messages

Maybe you are looking for