DME file generation for Bank of Montreal Canada

Hello Experts,
We are doing Electronic funds tranfer for direct deposits in CAnada. WE are using DME for this purpose. WE could get the file layout correct but the records in the file are twice as big - every character is followed by a special character - ".'" or "#" or "blank space depending on how we open the file .
Any thoughts??
Thanks,
Leela

Hi,
If you are using PMW for DME generation than please go to DMEE transaction code and in tree property node at File Data tab select radio button 'Allow Only These Charact.' and don't specify this characters in the field against Character Definition.
For blank space control it with Length and Conv. function in the segment definition.
Regards,
Anand Raichura

Similar Messages

DME File Generation for Thailand

Hi Gurus,
I would like to know which DME File format is using for Thailand.
I need to generate DME file for the Thailand country format while running APP F110.
Thanks in Advance.
Pavan

Hi,
If you are using PMW for DME generation than please go to DMEE transaction code and in tree property node at File Data tab select radio button 'Allow Only These Charact.' and don't specify this characters in the field against Character Definition.
For blank space control it with Length and Conv. function in the segment definition.
Regards,
Anand Raichura

File Generation for Bank Transfers

I need to generate the file in a format(Bank has given the format). When the txn F110 is run for Bank Transfer, that file should get generated in the format given by the Bank ? How can i achieve this ...

Hi,
This is not possible in standard F110 transaction. You have to do customization.
Ask your Abaper for enhancement. This particulat enhancemnet will show the data in a particulat format you required.
we are folloing the same way.
Bye

Regarding problem with new line feed for DME file generation

Hello Experts,
I m facing a problem in the DME file generation.
we want each record in the DME file should be in new line. for that we have add the new line feed character in the each row end. So in the SAP output it looks ok, But if we download that file the carriage return field is coming in the end of every row.
can any one tell how to solve this issue.
Please refer the below line code which i m using for new line
DATA: GM_newline TYPE c VALUE cl_abap_char_utilities=>CR_LF
You reply is valuable..
Thanks,
Suresh

DATA: GM_newline TYPE c VALUE cl_abap_char_utilities=>newline.

:-) How can we change the default file path for Bank file ( dmee ) ?

Hi All,
We encounter a problem.
Electronic bank file ( created after a F110 run ) are created, in an automatic way to the DIR_TEMP directory. ( On the SAP server )
How can we change the default file path for Bank files ( dmee ) ?
We'd like to specify another path.
Thx for your help.
Erwan

Hello,
Make sure that you have created the directory in transaction code AL11 with the help of basis consultants.
You can link your PC directory to the application server.
You can maintain the path whether your file needs to get saved in OBPM4 against your DMEE structure example GB_BACS etc.
If you do not maintain any path in OBPM4, then the file gets saved to temporary directory. If you give the directory path name in OBPM4, then the file gets saved to that directory with numbers 0001, 0002, 0003 etc till it reaches 9999 and reset from the beginning.
If you give the path as well as file name as ABCD, then the file gets generated to that directory folder with ABCD0001, ABCD0002, ABCD0003 etc. till it reaches ABCD9999 and reset from the beginning.
Hope this solves your problem.
Regards,
Ravi

DME file creation for APP

Hi all,
my client needs to do the payments for vendors in electronic format. for this i know only for electronic payments we use file DME.
How we create DME file in F110? and how this file fits for bank given specification? after payments made from bank (sending this file to bank and bank will pay) how the bank file we upload and post?
kindly send me any docs regarding config.of DMEE and upload also.
Thanks in advance,
i will assure points.
Soma

Dear Soma,
For DME file generation you need to first make the set up in SPRO and then while running the printout in F110, it will get generated. Then you can doenload the fle from FDTA and can upoad it to bank site.
The standard documentation on this from SAP is:-
http://help.sap.com/erp2005_ehp_03/helpdata/EN/cb/4104aadf2b11d3a550444553540000/frameset.htm
Regards,
Gaurav

Can I create File Formats for Bank Transfers?

Hello Everyone!
I need to know if Sap B1 2007A allow me to create File Formats for bank transfers in outgoing payments. I¨m in Colombia, South America, and working as Chile does.
It is available documentation related to this issue?
Thanks very much
Claudia
Edited by: Darius Heydarian on May 6, 2008 5:28 PM
Edited by: Philip Eller on May 20, 2008 9:10 AM

Kerstin,
Thanks for the information.
I might be wrong, but I understood that SAP did allow you to create dll files for this purpose. In the Document Resource Center in the Add-ons section, click on Payment Engine. There is a document called
'Payment Engine Plug-in Development Guide in Release 6.5'.
Claudia - you might want to see if this document is any use for you.
Although the name shows release 6.5, this document still appears for both 2005 and 2007.
I also checked 2007A and it still has the prompt for File Format.
As I said, I might be wrong, because I do not know anyone who has tried to create a plug-in, but if this is not for creating your own dll files, do you know what it is for?
Let me know what you think.
Regards,
Douglas

Sending DME file to the bank using RFFOUS_T?

Hi all,
I understand that we use RFFOUS_T to create the DME file but do we use the RFFOUS_T to send the generated DME file to the bank as well? I mean the RFFOUS_T is not linked to the banking system right? Is it I should use t-code: FDTA to download the DME file to my local PC and email the downloaded DME file to the bank? Anyone can clarify on this?
Thanks.

Yes. You can use RFFOUS_T to generate the payroll DME file (use the pre-DME program first, of course). Then, as you said, go to FDTA to download and send to the bank.

Switzerland ESR file format for Bank statement upload

Hi,
I want to how the Switzerland ESR file format for bank statement upload looks like?
Can i get the sample of the file format from anywhere?
I just want to input this file to program RFEBCH00 to convert it into multicash file format.
Please if anybody can help regarding this?
Thanks,

Hi Gordon,
Thank you so much for your welcome and prompt reply. The localization is Chinese. But the client is using HSBC service which only provides swift MT940 format. I believe Dutch is included in the system of 2007A. Unfortunately, our system is 2007B. Is there any chance I can download the bfp file from SAP portal site or other places? Thank you very much again for your help. I am looking forward to hear from you!
Cheers,
Leon

Problem in DME file generation

Hi experts,
I am facing a problem in the generation DME file. Required file format for SPAIN is different to that of the standard file that is generated by executing the standard program RFFOES_T. So I copied that standard program into another and made changes for the new file format in the subroutine DTA_SPANIEN. The file is being generated but with systematically 7 white lines (i.e) blank lines between 2 real lines. Cannot find where the problem lies. Can any one help me in this? Thanks in advance.
Regards,
Asha

Hi Calsadillo,
The below code says how I have passed the different records to the file
types: begin of t_file,
         record(1000),
       end of t_file,
     begin of t_h1,
       rec(2),
       trans(2),
       field1(10),
       crtd(6),
     end of t_h1,
     begin of t_h2,
       rec(2),
       trans(2),
       paynm(6),
     end of t_h2,
     begin of t_h3,
       rec(2),
       trans(2),
       payadd(35),
       filler(2),
       field2(40),
     end of t_h3,
     begin of t_h4,
       rec(2),
       trans(2),
       matdat(6),
       deltype,
       contype(2),
       filler(7),
     end of t_h4.
data : lwa_h1 type t_h1,
       lwa_h2 type t_h2,
       lwa_h3 type t_h3,
       lwa_h4 type t_h4,
       lwa_file type t_file.
data : li_file type standard table of t_file.
*Start Filling Record 1
      l_count        = l_count + 1.
      lwa_h1-rec     = lc_03.
      lwa_h1-trans   = lc_56.
      lwa_h1-field1 = t001z-paval.
      lwa_h1-crtd = '0000000O02XR'.
      lwa_file       = lwa_h1.
      APPEND lwa_file TO li_file.
*Start Filling Record 2
      l_count       = l_count + 1.
      lwa_h2-rec    = lc_03.
      lwa_h2-trans = lc_56.
      lwa_h2-paynm = t001-butxt.
      lwa_file      = lwa_h2.
      APPEND lwa_file TO li_file.
*Start Filling Record 3
      l_count       = l_count + 1.
      lwa_h3-rec    = lc_03.
      lwa_h3-trans = lc_56.
      lwa_h3-payadd = adrc-city1.
    lwa_h3-filler    = lc_06.
      lwa_file      = lwa_h4.
      APPEND lwa_file TO li_file.
*Start Filling Record 4
      l_count       = l_count + 1.
       lwa_h4-rec    = lc_03.
      lwa_h4-trans = lc_56.
      lwa_h4-matdat = lc_030.
      lwa_h4-deltype    = lc_004.
      lwa_h4-contype    = lc_003.
      lwa_file      = lwa_h3.
      APPEND lwa_file TO li_file.
OPEN DATASET par_unix FOR OUTPUT IN LEGACY TEXT MODE
                                IGNORING CONVERSION ERRORS.
IF sy-subrc IS INITIAL.
    LOOP AT li_file INTO lwa_file.
      TRANSFER lwa_file TO par_unix.
    ENDLOOP.
    CLOSE DATASET par_unix.
ENDIF.
where par_unix is the file name entered on the selection screen.
Now where can i fit the two declarations of code which you have sent? Can you please explain.
Regards,
Asha

DME File generation

Hi Guru's
I am having a small problem in generation of DME file after F110 is done.
Once the F110 has been run successfully and the Payment has been carried out, we can generate a DME file from Environment-->Payment medium--->DME Administration, there is also T code (I don't remember the T code)
I could see the reference no. etc in REGUT table also , but I couldn't see or generate the DME File
I am getting the following error "There is no source for this data record" Error no :FZ205
Can any one help me out in generating the file
Regards
VSK

Dear
thanks for the quick response, One small doubt
I have recreated a Pmt medium thru the program"SAPFPAYM",... i have got a new window saying that posting orders generated , completed
My doubt is that should we delete the previous entry because the 1st window is showing me the generated lines...
I have not deleted, and am still getting the same error message...
Any pointers in this regard
Regards
VSK

DME file generation in APP

Hi All,
Can you tell me, how i can generate DME file after APP run, what program should i use for this and are there any other specific settings required to generate

Hello,
Follow the below step,
1) Create a structure in the transaction code DMEE
2) Assign the DMME structure in the payment method by conuntry in FBZP
3) Create the payment medium Formats with the same name as given in the DMEE structure ( PATH : AP - Business transaction - outgoing payment - automatic outgoing payment - payment media - make settings for payment medium from payment medium workbench - create payment medium formats)
4) create a variant for the DMEE structure you created (Select the DMEE you created and create a new variant)
5) Then execute the F110
based on the above config and settings, DME file will be generated.
Hope this clarifies.
Raja.A

Stack file generation for upgrade

Hello,
I have to generate Stack.xml file to upgrade the system.
Kindly guide me for stack file generation and SUM toll for upgrading the system.
Thanks and Regards,
Akshay

Hi Akshay,
Kindly guide me for stack file generation and SUM toll for upgrading the system.
Above information is easily available on SCN,please search or elaborate exact issues which you're facing now.Anyways follow SCN doc at Generating Stack For EHP Upgrade
Regards,

Predefined bank file format for bank statement processing?

Hi Guys,
Currently I am working on the bsp add-on. According to the tutorial from SAP portal, there are some predefined Bank Format Project (bfp) files. Does anyone have an idea where I can get these files? I am looking for the bfp file of MT940 SWIFT. Thank you very much! Any reply would be appreciated!
Best Regards,
Leon

Hi Gordon,
Thank you so much for your welcome and prompt reply. The localization is Chinese. But the client is using HSBC service which only provides swift MT940 format. I believe Dutch is included in the system of 2007A. Unfortunately, our system is 2007B. Is there any chance I can download the bfp file from SAP portal site or other places? Thank you very much again for your help. I am looking forward to hear from you!
Cheers,
Leon

R12 - Secure/Protect the Electronic Payment File created for Bank

We setup the Oracle Payables to Pay the suppliers electronically. We were able to create the electronic payment file in a standard US NACHA format after the setup. Now my question is, What are the various ways to secure or protect this file from being updated (not let any one modify it or change the numbers) before it is being uploaded to our Bank's server?
Is there any standard process to achieve any kind of security to the file? Or Please let me know any other ways.
Thanks,
Munna

Hi!
    It is not allow to save into the SAP SEVER path.
      After Exec payment I go to the "/edit/download", in "File name" I put the SAP SERVER PATH "/iface/data_out/comm"
but It return "File /iface/data_out/comm/pagtro.txt could not be opened".
      It is allowed only if I drop into the windows path or in my micro.
     Do you know what configuration I need to do ?
Thanks.

DME file generation for Bank of Montreal Canada

Similar Messages

Maybe you are looking for