Dnscmd's OpenAcl option doesn't seem to change DNS record permissions

I'm creating DNS A records with dnscmd /recordadd, and I can't see a difference in the A record's permissions whether I use the OpenAcl option or not. Is this normal?
I was expecting with OpenAcl to see permissions similar to Write permissions for Authenticated Users or something. Instead I can't see any difference in the permissions at all and the permissions for non-admins are Read permissions for Everyone.
The DCs run win 2008 R2 SP1. The syntax I've been using for dnscmd.exe is:
dnscmd /recordadd mydomain.com mycomputer /aging /openacl A 192.168.0.123
I want to migrate from Infoblox DNS to AD-integrated. So I'm expecting to export to csv from Infoblox, reformat the csv file a bit and use dnscmd.exe to read the reformatted csv and create DNS records in AD. I'll also enable the option on the Windows computers
to register their DNS records.
I think that the records that dnscmd.exe creates in AD won't have permissions that allow the Windows computers to overwrite them unless I use the OpenAcl option. But OpenAcl doesn't seem to make any difference to the permissions. Very confusing! Thanks for
any help.

Thanks Kumar and sorry for replying so late. What you said is correct and what solved my problem was running Windows Update. I was testing using W2K8 R2 with SP1 but no updates after that. After I ran Windows Update, then creating a DNS record using dnsmd.exe
with the /OpenAcl argument did indeed set the permissions on the DNS record so that Authenticated Users could write to it.

Similar Messages

How do I remove the menu button? The Customize option doesn't seem to work for that.

How do I remove the menu button? [That IChing looking three line icon on the toolbar.]
The toolbar Customize option doesn't seem to work, and it seems a waste to have a button that duplicates the menus. I'd like to swap it out for the NoScript icon.

Hi, ''I can't recommend that you do it'', but If you really are determined, [http://www.tweakguides.com/Firefox_12.html this article] may help.

Where do I update my software from OSX 10.5.8 to 10.6.8. this option doesn't seem to be available in the itunes store

where do I update my software from OSX 10.5.8 to 10.6.8. this option doesn't seem to be available in the itunes store

OS X v10.5 is Mac OS X, not available from the iTunes Store.
You can purchase Snow Leopard v10.6 from the Apple online store > Mac OS X 10.6 Snow Leopard - Apple Store
Before purchasing, make sure your Mac meets Snow Leopard's requirements > Mac OS X v10.6 Snow Leopard - Technical Specifications

In my 4s display option doesn't come to change colours when I go to Setting-General. I am bored with blue colour. Please advise.

In my 4s display option doesn't come to change colours when I go to Setting-General. I am bored with blue colour. Please advise.

Go to Settings > Wallpapers & Brightness.

Copy items to the iPhoto Library option doesn't seem to work

Hi, I'm using 7.1.1 and if I:
1. De-select the create "Copy items to the iPhoto Library" option in Preferences/Advanced
2. Create a new library
It doesn't seem to work. The images are still being copied into the library -- that is, if I show the package contents of the library, the data directory has the photos. Additionally, if I do something like open, modify in photoshop and save one of the imported files, it doesn't show up in iPhoto. Likewise if I modify the file in iPhoto and then look at the photo in the file system using Preview or Photoshop, the iPhoto changes don't appear.
Is this a bug? Is it not supposed to work like this? I believe that if I say "don't copy the files into the library" it means that it uses my original photos in their original location and that changes I make in iPhoto modify and manipulate the original files.
I've tried this on two different machines and get the same results. Anyone have any ideas?
Thanks!

markand:
Welcome to the Apple Discussions. It's not a bug. You don't understand correctly how iPhoto works in the "referenced" library mode. The Data folder contains the thumbnail files that iPhoto creates and needs to operate. The Originals folder will contain alias files linked to the source files at their location. Any edits, by iPhoto or by Photoshop configured correctly will result in a modified file in the Modified folder of iPhoto. *You should not open, rename, move or edit any file in the library package from the Finder.*
Using Photoshop to edit photos in iPHoto must be done by selecting PS as the editor to use in iPhoto's General Preferences section. Then follow the instructions below to edit photos correctly:
Using Photoshop (or Photoshop Elements) as Your Editor of Choice in iPhoto.
1 - select Photoshop as your editor of choice in iPhoto's General Preference Section's under the "Edit photo:" menu.
2 - double click on the thumbnail in iPhoto to open it in Photoshop. When you're finished editing click on the Save button. If you immediately get the JPEG Options window make your selection (Baseline standard seems to be the most compatible jpeg format) and click on the OK button. Your done.
3 - however, if you get the navigation window that indicates that PS wants to save it as a PS formatted file. You'll need to either select JPEG from the menu and save (top image) or click on the desktop in the Navigation window (bottom image) and save it to the desktop for importing as a new photo.
This method will let iPhoto know that the photo has been editied and will update the thumbnail file to reflect the edit..
If you want to use both iPhoto's editing mode and PS without having to go back and forth to the Preference pane, once you've selected PS as your editor of choice, reset the Preferences back to "Open in main window". That will let you either edit in iPhoto (double click on the thumbnail) or in PS (Control-click on the thumbnail and seledt "Edit in external editor" in the Contextual menu). This way you get the best of both worlds
TIP: For insurance against the iPhoto database corruption that many users have experienced I recommend making a backup copy of the Library6.iPhoto database file and keep it current. If problems crop up where iPhoto suddenly can't see any photos or thinks there are no photos in the library, replacing the working Library6.iPhoto file with the backup will often get the library back. By keeping it current I mean backup after each import and/or any serious editing or work on books, slideshows, calendars, cards, etc. That insures that if a problem pops up and you do need to replace the database file, you'll retain all those efforts. It doesn't take long to make the backup and it's good insurance.
I've created an Automator workflow application (requires Tiger), iPhoto dB File Backup, that will copy the selected Library6.iPhoto file from your iPhoto Library folder to the Pictures folder, replacing any previous version of it. It's compatible with iPhoto 08 libraries and Leopard. iPhoto does not have to be closed to run the application, just idle. You can download it at Toad's Cellar. Be sure to read the Read Me pdf file.

[solved] fancontrol - fan speed doesn't seem to change after boot

I used fancontrol to control my fan but after I rebooted it doesn't seem to speed up the fan when it hits MAXTEMP whereas it did before I rebooted.
Before the boot I set the CPU governer to performance (3.1Ghz) to heat up the cpu to test the fan cooling (using lm_sensors) and when it hit around 65c the fan got faster and cooled it adequately but after reboot the temp has gone right up to 90c and the fan doesn't even sound like it has sped up.
I have the AMD 8120fx 8 core CPU which is set to default/stock clocks in bios.
cat /etc/fancontrol
# Configuration file generated by pwmconfig, changes will be lost
INTERVAL=10
DEVPATH=hwmon2=devices/platform/nct6775.656
DEVNAME=hwmon2=nct6776
FCTEMPS=hwmon2/pwm2=hwmon2/temp9_input
FCFANS=hwmon2/pwm2=hwmon2/fan2_input
MINTEMP=hwmon2/pwm2=20
MAXTEMP=hwmon2/pwm2=65
MINSTART=hwmon2/pwm2=150
MINSTOP=hwmon2/pwm2=0
sudo systemctl status fancontrol -l
fancontrol.service - Start fan control, if configured
Loaded: loaded (/usr/lib/systemd/system/fancontrol.service; enabled)
Active: active (running) since Tue 2014-03-04 17:11:13 GMT; 17min ago
Main PID: 31561 (fancontrol)
CGroup: /system.slice/fancontrol.service
|- 8347 sleep 10
`-31561 /bin/bash /usr/sbin/fancontrol
Mar 04 17:11:13 myhost fancontrol[31561]: Depends on hwmon2/temp9_input
Mar 04 17:11:13 myhost fancontrol[31561]: Controls hwmon2/fan2_input
Mar 04 17:11:13 myhost fancontrol[31561]: MINTEMP=20
Mar 04 17:11:13 myhost fancontrol[31561]: MAXTEMP=65
Mar 04 17:11:13 myhost fancontrol[31561]: MINSTART=150
Mar 04 17:11:13 myhost fancontrol[31561]: MINSTOP=0
Mar 04 17:11:13 myhost fancontrol[31561]: MINPWM=0
Mar 04 17:11:13 myhost fancontrol[31561]: MAXPWM=255
Mar 04 17:11:13 myhost fancontrol[31561]: Enabling PWM on fans...
Mar 04 17:11:13 myhost fancontrol[31561]: Starting automatic fan control...
Any help would be appreciated, thanks.
Last edited by pluckypigeon (2014-03-05 12:01:00)

Algernop wrote:Have you implemented this by through the lm_sensors.service? This has been known to introduce boot-to-boot inconsistencies.
Thank you for your response. I did have the lm_sensors.service problem before but not when I had this problem (I solved that by adding the modules created by sensors_detect to a module-load.d file.)
The problem (I think) came from trying to fix the boot-to-boot inconsistencies (caused by lm_sensors.service). What I did was blacklist my k10temp module and that stopped a device from being detected. Then, when I generated the configuration file it didn't add the device.
Below is my new configuration file, where you can see the device(hwmon1) is now in it.
# Configuration file generated by pwmconfig, changes will be lost
INTERVAL=10
DEVPATH=hwmon2=devices/platform/nct6775.656 hwmon1=devices/pci0000:00/0000:00:18.3
DEVNAME=hwmon2=nct6776 hwmon1=k10temp
FCTEMPS= hwmon2/pwm2=hwmon1/device/temp1_input
FCFANS= hwmon2/pwm2=hwmon2/fan2_input
MINTEMP= hwmon2/pwm2=20
MAXTEMP= hwmon2/pwm2=65
MINSTART= hwmon2/pwm2=150
MINSTOP= hwmon2/pwm2=0

Lightroom 4 resizing on export feature - using the "long edge" resize option - doesn't seem to work

In previous versions of Lightroom (prior to 4), when I used the resize feature while exporting, I often used the "long edge" value to resize.
Previously, when I selected 2500 as the "long edge" value, I would receive exported JPGs in a size of something like 2500x1650 or so for landscape shots and 1650x2500 for portrait shots.
With LR 4 (not sure if this started with the RCs or 4.0), using the same settings, I'm getting landscape shots that are 3700x2500 and portrait shots that are 1650x2500. This is acting more like I said I wanted a dimensional resize of _____ X 2500 instead of long edge of 2500.
I tried playing around with some of these settings, but nothing seems to give me the old behavior of 2500 on the long edge, even though that's what I've set it for.
Anyone else seen this type of issue?
I'm currently running LR 4 RC2, but also noticed this on RC1, but not sure of 4.0. I'm a Mac user, running the current version of Lion (10.7.3) on a 2010 Mac Pro.
Thanks,
Mark

With RC2 on Windows 7 (64 Bit) I get 2500x1667 for landscape and 1667x2500 for portrait, as expected. Seems to be an issue in the Mac version only.
A workaround might be to use "dimensions" instead and leave one of the fields empty (LR inserts "0" there, but one cannot enter "0" manually). I think this is equivalent to "long edge", but I am not 100% sure (edit: ok, I think I am nearly sure that it is).

Read Only option doesn't seem to be working for me

I've got a text field on a page that I want to be editable for administrators, but only display values for Developers.
I've created an application item, ADMIN, which stores whether one is an administrator in a 'Yes' or 'No' fashion. On the text field I've placed a READ ONLY condition on it where if ADMIN = 'No' then it's supposed to be read only.
No matter what I put in there though, No, 'No', Yes, or 'Yes' I still get a simple, editable, text field.

I don't know why, but it seems when I've exhausted all searching and post, I find what my error is.
I won't even bother explaining this one... but lets just say I'm going to grab some more coffee.

Can't import video from Sony HDR cx550v without video aliasing. Tried multiple settings in capture settings but doesn't seem to change log and transfer settings in FCS.

I tried importing into Imovie but it will only let me in Large format not Full. There has to be a way to import full 1920 x 1080/60i in Final Cut right?

Make sure you are watch your clip in QuickTime 7, not QuickTime X.
Open the file in QuickTime 7, and go to the menu QuickTime Player 7 > Preferences and make sure you have
Use high-quality video setting when available, and Enable Final Cut Studio Color Compatibility are checked.
When you view the clip in the Viewer in Final Cut Pro, you will generally see some degradation to the video unless you have the Viewer (and/or Canvas) set to display at 100% magnification. You may need to resize your windows if you set the viewer to that size.
MtD

Please help me..... I am still unable to retrieve my emails. It said that my password is in correct. I kept changing it and the old password appears. It doesn't seem to change to the new password. Is my MAC hacked??

I still have problems with retrieving my emails. It does not take my new password despite inputting it many times.
Is my Mac hacked?? Please help!!!

I did delete the email account but still no incoming emails. Instead it's downloading thousands of emails but ONLY the junk emails were retrieved. I want to note here that my MAIL emails is linked to Yahoo. I am able to retrieve the emails on my Yahoo account but not on MAIL. I checked my Doctor Connection and they are all green. Please help. Thanks.

MP3 encoder VBR Options doesn't work anymore

Hi everyone !
I always used iTunes mp3 encoder to rip my CD's with the VBR option ON and it worked fine until now.
Indeed since 10.3 the VBR option doesn't seem to be working no more : the output is a CBR mp3 file either I tick or not the VBR option box !
Does anyone have the same problem ? Is there a way to solve this issue ?
Thank you

We can't know. You have not provided any system info or other useful technical details.
Mylenium

My mac seems to be frozen on an internet page. I cant force quit. I can't control+options+command+esc. I can't access my activity monitor. I can see my mouse moving but when I click on anything, it doesn't seem to engage or recognize it. Fix?

My mac seems to be frozen on an internet page. I can't force quit. I can't control+options+command+esc. I can't access my activity monitor. I CAN see my mouse moving but when I click on anything, it doesn't seem to engage or recognize it. Fix?

Thank you. There is a bigger issue. It is not the web page that is the problem. It is that I can see my mouse moving and can move it along the bottom toolbar and the options will highlight but I can't click on anything. I can see the apple icon to get to force quit but cant click on it.
I used your suggestion and force quit came up but I can't select the option to force quit... not even with my arrows and enter/return key. Any other thoughts?
Thank you.

How can I alter the track sequence of an album? It used to be possible through Get Info on old iTunes, but it doesn't seem to be an option in the new version.

How can I alter the track sequence of an album? It used to be possible through Get Info on old iTunes, but it doesn't seem to be an option in the new version.

Right click - get info.

Ipod touch is trying to download a song from itunes and an app from the store. Both are waiting, and won't dowload. Is there a way I can stop them dowloading? Doesn't seem to be an option to

My ipod touch is trying to download a song from itunes and an app from the store. Both are waiting, and won't dowload. Is there a way I can stop them dowloading? Doesn't seem to be an option to

Create a iTune and App Store account without credit card
1. Go to App Store and select a free app
2. Tap INSTALL APP
3. Create New Apple ID
4. Confirm Your Country
5. Agree with Terms and Conditions
6. Fill in your Apple ID and Password (must be a valid email address)
7. Create and answer your secret question e.g. What is the name of my dog?
8. Select NONE for Payment Method
9. Fill in Billing Address i.e. your address
10. Submit application for new Apple ID
11. Wait for verification email
12. When email arrive, verify your account
13. Start downloading your free apps

I received a photo attachment in a gmail and my iphone 4 doesn't seem to have a single option to download and save it to the phone. there has to be a way no?

i received a photo attachment in a gmail and my iphone 4 doesn't seem to have a single option to download and save it to the phone. there has to be a way no?

Tap the image and you can select "Save Image" or "Copy".

Dnscmd's OpenAcl option doesn't seem to change DNS record permissions

Similar Messages

Maybe you are looking for