In my 4s display option doesn't come to change colours when I go to Setting-General. I am bored with blue colour. Please advise.

Go to Settings > Wallpapers & Brightness.

Similar Messages

HT204409 How do I change or reset my password for my wifi? I have forgotten my initial password when I setup the wifi and now cant use it with my iPod but it still works with my iPad as the password option doesn't come up like the iPod.

How do I change or reset my password for my wifi? I have forgotten my initial password when I setup the wifi and now cant use it with my iPod but it still works with my iPad as the password option doesn't come up like the iPod.

If you are saying that the iPod asks for the password for the network and you do not know it, what may work is to turn on iCloud keychain for the iPod and iPad., Thet may sync the password from the iPad to the iPod
http://9to5mac.com/2013/10/26/how-to-setup-and-use-icloud-keychain-for-mavericks -and-ios-7/
Otherwise you will have to go into the router settings and reset the wifi password in the router

ITunes 10.2.1.1 doesn't recognize my iPhone 4 when I try to sync it. This has happened suddenly. Please help.

iTunes 10.2.1.1 doesn't recognize my iPhone 4 when I try to sync it. This has happened suddenly. Please help.

I recently installed IOS 4.3.2. and ITunes 10.2.2 on my 64 Bit Vista PC. Since upgrading the IOS on any of my devices, none of them are recognized in iTunes. The computer recognizes them in My Computer but not in iTunes. Apple support pointed me to http://http://support.apple.com/kb/TS1538?viewlocale=en_US which directs you to uninstall/reinstall iTunes and all related programs. That has not solved the problem. The only guidance I have been given is from a tech at the Apple store who mentioned that there might be issues with the drivers in Vista. I have not been able to find any help with solving that issue. Does anybody have any thoughts.

I have some problem with my computer because when i turn it up, the screen turns in a blue colour and the sound doesn't work and in this way i can't hear anything

i have some problem with my computer because when i turn it up, the screen turns in a blue colour and the sound doesn't work and in this way i can't hear anything

Will u help me or not?

Hi there, why doesn't my iPad change orientation when I write an email?

Hi
I have a problem with my iPad 2. It doesn't change orientation when I go into Mail and start writing. I haven't touched the 'lock orientation' button.
Can anybody explain how to fix this?
Thanks in advance,
Cee Cee

- First make sure that you don't see the lock icon on the top right corner (it may have been activated by default).
- If other apps keep rotating but just the Mail one doesn't, then you probably need to force quit the Mail app.
Two ways to do that:
- in Mail, press the Sleep/Wake button for 10-15 sec until the shutdown screen appears, then press the home button until the app quits.
- on the homescreen, double press the home button to see the opened apps, the press on the mail app until you see them bouncing with a red circle on the top left of the icon, and press on that sign for the mail app, then press the home button again to go back to normal.
Then, launch mail again and check if it works.

My 30-inch cinema display often doesn't come on at startup and I have to disconnect it and reconnect to work.

I have a 30-inch cinema display connected to a Mac Mini. When I first boot up the computer after having it shut down for a couple of days, the display screen does not illuminate about half the time. If I disconnect the display from the power brick and then reconnect it usually comes on, although sometimes I have to do that more than once. It works fine once it on and displaying. Anyone else seeing this?
Rocketman

Hi Rocky Rakoon,
Thank you for your post, and welcome to the Apple Support Communities.
I understand that your Apple Cinema Display is not turning on upon startup. I'd like to reset the following, as it may resolve your issue:
Intel-based Macs: Resetting the System Management Controller (SMC)
http://support.apple.com/kb/HT3964
You may also want to reset your computer's PRAM:
OS X Mountain Lion: Reset your computer’s PRAM
http://support.apple.com/kb/PH11243
Note: Resetting PRAM may change some system settings and preferences. Use System Preferences to restore your settings.
For more troubleshooting directly related to the Cinema Display, see this resource:
Apple Cinema Display: Troubleshooting steps
http://support.apple.com/kb/HT2810
Thanks,
Matt M.

My Macbook Pro (15-in early 2008) in need of display replacement doesn't come back from repair for 1 month now...

I left my Macbook Pro (15-inch early 2008 vers) w/ OSX 10.5.8 had a serious display problem - it was very touch sensitive and won't show full view immediately without touching more than several times on the right side of the screen. Sometimes it gives ridiculous amount of lines or repetitions, however, the harddrive was working just fine. (Upon getting the view back, all applications were working just fine.)
So I dropped it off at Apple 5th Ave (24hrs) store on March 19th. The MBP was received by an Apple repair hub (so not in-store repair) on the 23rd. Ever since it has been 'on-hold' status mentioning 'part on order'. So, today is April 19th. Exactly 1 month since I dropped it off.
I called Apple 5th Ave, which gave me a number to Apple repair dept. Upon having talked with a rep there, the particular part (because they were initially suspecting its logic board too) they have been waiting for is the very display. As it has been manufactured in Japan, it seems to be really back-ordered, obviously due to the current crisis in the northern Japan.
I heard that iPad2's displays have been seriously back-ordered too... but now I started worrying about my old MBP's display may be the lowest priority before such hot product like 'iPad2'??!! Being Japanese myself, I totally understand the situation... but if it'd take extremely long time even from now, it definitely causes me more than temporary problems as it is the only laptop that I use for everything I do. (Luckily, a friend of mine has been loaning her laptop until she will need it when she goes on trip. But it's been already a month instead of 5-7 business days turn-around that the genius bar rep initially told me. I have been using her laptop with my external disk but of course, it's been quite inconvenient.)
I'm wondering if Apple can help this situation by replacing the whole machine w/ a refurbished one from the same model??? or temporarily loaning me one?!? I'm just becoming desperate & worried now. Is there anyone who has a similar situation?!?

Call Apple and asked to be transferred to "Customer Relations." Explain everything to them and the will take care of you. Make sure you have all your documents and case numbers when you call.
17" 2.2GHz i7 Quad-Core MacBook Pro  8G RAM  750G HD  120G Vertex 3 SSD Boot HD 

Dnscmd's OpenAcl option doesn't seem to change DNS record permissions

I'm creating DNS A records with dnscmd /recordadd, and I can't see a difference in the A record's permissions whether I use the OpenAcl option or not. Is this normal?
I was expecting with OpenAcl to see permissions similar to Write permissions for Authenticated Users or something. Instead I can't see any difference in the permissions at all and the permissions for non-admins are Read permissions for Everyone.
The DCs run win 2008 R2 SP1. The syntax I've been using for dnscmd.exe is:
dnscmd /recordadd mydomain.com mycomputer /aging /openacl A 192.168.0.123
I want to migrate from Infoblox DNS to AD-integrated. So I'm expecting to export to csv from Infoblox, reformat the csv file a bit and use dnscmd.exe to read the reformatted csv and create DNS records in AD. I'll also enable the option on the Windows computers
to register their DNS records.
I think that the records that dnscmd.exe creates in AD won't have permissions that allow the Windows computers to overwrite them unless I use the OpenAcl option. But OpenAcl doesn't seem to make any difference to the permissions. Very confusing! Thanks for
any help.

Thanks Kumar and sorry for replying so late. What you said is correct and what solved my problem was running Windows Update. I was testing using W2K8 R2 with SP1 but no updates after that. After I ran Windows Update, then creating a DNS record using dnsmd.exe
with the /OpenAcl argument did indeed set the permissions on the DNS record so that Authenticated Users could write to it.

Error: This disk needs to be repaired using the Recovery HD. When I boot on Recovery and run verify disk, the error doesn't come anymore. Just when I run verify disk on normal mode. Anybody has seen this before?

My Macbook Pro (Retina, 13-inch, Early 2013) has been freezing out of the blue probably once every two months. I restarted on safe mode, went to Disk Utility, repaired permissions and ran "Verify Disk" and got the following:
Invalid directory item count(It should be 114483 instead of 114484)
File system check exit code is 8.
Error: This disk needs to be repaired using the Recovery HD. Restart your computer, holding down the Command key and the R key until you see the Apple logo. When the OS X Utilities window appears, choose Disk Utility.
Rebooted on Recovery mode and ran "Verify Disk" but the message didn't appear anymore, thus not letting me to access the "Recovery HD" procedure.
When I restart normally and do the disk verification I get the same error.
Has anybody come to something similar?
Suggestions?

I never ever run a Verify Disk. I simple repair the disk drive and then the user partition(s).
And do one or two Safe Boots.
Also helpful to have two full backups: TimeMachine at least, plus a clone of your system drive and data.
Install or clone the system to an external hard drive, repair that and then boot from it, check that everything works, repair the internal drive.
You need to use Repair to TRIM an SSD.
Lots of problems with Yosemite when updating install a new OS. Always better to backup, erase, install, and then use Setup Assistant to import and restore settings and files.
Probably better to post in the MacBook Pro forum or better yet, in Yosemite forum.

I had a pop-up from Mcafee yesterday with option to block a particular access request, today Firefox will not open but shows the message with "try again" -please help.

I assume that I inadvertantly authorized McAfee to block Firefox .
How to unblock ?
thanks for helping.

Sometimes a problem with Firefox may be a result of malware installed on your computer, that you may not be aware of.
You can try these free programs to scan for malware, which work with your existing antivirus software:
* [http://www.microsoft.com/security/scanner/default.aspx Microsoft Safety Scanner]
* [http://www.malwarebytes.org/products/malwarebytes_free/ MalwareBytes' Anti-Malware]
* [http://support.kaspersky.com/faq/?qid=208283363 TDSSKiller - AntiRootkit Utility]
* [http://www.surfright.nl/en/hitmanpro/ Hitman Pro]
* [http://www.eset.com/us/online-scanner/ ESET Online Scanner]
[http://windows.microsoft.com/MSE Microsoft Security Essentials] is a good permanent antivirus for Windows 7/Vista/XP if you don't already have one.
Further information can be found in the [[Troubleshoot Firefox issues caused by malware]] article.
Did this fix your problems? Please report back to us!

HT4623 I am trying to update the iOS on my 4th gen iPod, but when I go to setting-general there is no update option on the screen. What should I do?

Help

This feature is only available on devices running ios 5 or later.
You will need to update via itunes.
iOS: How to update your iPhone, iPad, or iPod touch - Support - Apple

Sql query is hung, doesn't comes back

Hello Every one,
Two node Rac on Linux 5 64-bit, 11.2.0.1.0
In our data ware housing environment, i have a sql query which doesn't comes back at all, when i run, it is just hung for a long time with no output. I did following basic testing
1. All the indexes are valid and stats are up to date(count(*) matches num rows)
2. There is a union clause in the query, i divided the query in two parts - the first part prior to union and second part after union, then i ran those two parts separately - the first part comes back quickly with no rows selected but the second part has a main problem(its just hung).
Please note that one table in the query has a partitioned table. following is the query and the tables involved in it.
Please let me know if you need any further information, it will be of great help if i get through this. Thanks in advance.
OWNER                          TABLE_NAME                     STATUS   LAST_ANAL   NUM_ROWS
MAINTENANCE_DM                 D_VEHICLE                      VALID    21-NOV-12     752590
PTL_HOLD                       R_COMP_CODES                   VALID    21-NOV-12        108
PTL_HOLD                       USER_GEO                       VALID    20-DEC-12        300
PTL_EDW                        D_CUSTOMER                     VALID    20-DEC-12     219498
PTL_EDW                        D_LOCN                         VALID    20-DEC-12      19456
PTL_EDW                        D_VEHICLE                      VALID    20-DEC-12    3973271
PTL_EDW                        F_VEH_LOCN                     VALID    20-DEC-12    3131138
PTL_EDW                        F_RO_DETL                      VALID    21-NOV-12   29234052
8 rows selected.
SELECT
'../../opendoc/',
'&hideSave=true&hideEdit=true&hideRefresh=true&hideUserPromptInput=true',
'Data As Of:',
'Run Date:',
ptl_hold.get_stgextr_time('FACT_FPNA_RO'),
'RO Date',
PTL_EDW.F_RO_DETL.RO_TYP,
PTL_EDW.D_CUSTOMER.CUST_NUM,
(PTL_EDW.D_CUSTOMER.CUST_NUM )||' - '||( PTL_EDW.D_CUSTOMER.CUST_PRIME_NM),
PTL_EDW.D_CUSTOMER.BILL_GRP,
CASE WHEN PTL_EDW.D_LOCN.CORP_CD='HPTL' THEN 'US' ELSE CASE WHEN PTL_EDW.D_LOCN.CORP_CD='2000' THEN 'CANADA' ELSE 'UNKNOWN' END END,
PTL_EDW.D_LOCN.REGN_NUM,
PTL_EDW.D_LOCN.REGN_NUM ||' - '||PTL_EDW.D_LOCN.REGN_NM,
PTL_EDW.D_LOCN.AREA_NUM,
PTL_EDW.D_LOCN.AREA_NUM||' - '||PTL_EDW.D_LOCN.AREA_NM,
PTL_EDW.D_LOCN.RDIST_NUM,
PTL_EDW.D_LOCN.RDIST_NUM||' - '||PTL_EDW.D_LOCN.RDIST_NM,
PTL_EDW.D_LOCN.DIST_NUM,
PTL_EDW.D_LOCN.DIST_NUM||' - '||PTL_EDW.D_LOCN.DIST_NM,
CASE WHEN TRIM(PTL_EDW.D_VEHICLE.VEH_CAP_STAT) IN ('ACTIVE','ACCRUED') THEN 'Active' ELSE 'Inactive' END,
DECODE(PTL_EDW.D_VEHICLE.CONTR_GRP, 'X' ,'NON-CONTRACT',PTL_EDW.D_VEHICLE.VEH_CAT),
PTL_EDW.D_VEHICLE.VEH_UNIT_TYP,
PTL_EDW.D_VEHICLE.VEH_MODL_YR,
PTL_EDW.D_VEHICLE.VEH_MAKE,
PTL_EDW.D_VEHICLE.VEH_MODEL,
CASE WHEN ( PTL_HOLD.R_COMP_CODES.COMP_CD ) IN ('057','061') THEN 'Accident/Incident' ELSE 'Non-Accident/Incident' END,
PTL_HOLD.R_COMP_CODES.COMP_CD,
PTL_HOLD.R_COMP_CODES.COMP_DESC,
PTL_HOLD.R_COMP_CODES.COMP_CD||' - '||PTL_HOLD.R_COMP_CODES.COMP_DESC,
PTL_EDW.D_VEHICLE.UNIT_NUM,
PTL_EDW_D_RO_LOCN.DIST_NUM || PTL_EDW_D_RO_LOCN.DIST_SUFX || PTL_EDW.F_RO_DETL.ORIGINAL_RO_NUM,
PTL_EDW_D_RO_LOCN.DIST_NUM || PTL_EDW_D_RO_LOCN.DIST_SUFX || PTL_EDW.F_RO_DETL.ORIGINAL_RO_NUM || PTL_EDW.F_RO_DETL.RO_SEQ_NUM
PTL_EDW.F_RO_DETL.RO_SRC,
PTL_EDW.F_RO_DETL.TOTAL_LABOR_HRS,
PTL_EDW.F_RO_DETL.TOTAL_LABOR_COST,
PTL_EDW.F_RO_DETL.OUT_COST,
PTL_EDW.F_RO_DETL.PARTS_COST,
PTL_EDW.F_RO_DETL.RO_COST,
TO_CHAR(PTL_EDW_D_RO_LOCN.LOCN_KEY),
PTL_EDW.F_RO_DETL.RO_NUM,
PTL_EDW.F_RO_DETL.RO_SEQ_NUM,
PTL_EDW.F_RO_DETL.ORIGINAL_RO_NUM
FROM
PTL_EDW.F_RO_DETL,
PTL_EDW.D_CUSTOMER,
PTL_EDW.D_LOCN,
PTL_EDW.D_VEHICLE,
PTL_HOLD.R_COMP_CODES,
PTL_EDW.D_LOCN PTL_EDW_D_RO_LOCN,
PTL_EDW.D_LOCN PTL_EDW_D_CHRG_LOCN,
PTL_EDW.D_TIME,
PTL_EDW.D_LOCN CURRENT_VEH_LOCN,
PTL_EDW.F_VEH_LOCN,
PTL_EDW.D_VEHICLE CURRENT_VEH
WHERE
( PTL_EDW.F_RO_DETL.CUST_KEY=PTL_EDW.D_CUSTOMER.CUST_KEY )
AND ( PTL_EDW.F_RO_DETL.LOCN_KEY=PTL_EDW.D_LOCN.LOCN_KEY )
AND ( PTL_EDW.D_TIME.TIME_KEY=PTL_EDW.F_RO_DETL.RO_TIME_KEY )
AND ( PTL_EDW.D_VEHICLE.VEH_KEY=PTL_EDW.F_RO_DETL.VEH_KEY )
AND ( PTL_EDW_D_RO_LOCN.LOCN_KEY=PTL_EDW.F_RO_DETL.RO_LOCN_KEY )
AND ( PTL_EDW.F_RO_DETL.CHRG_LOCN_KEY=PTL_EDW_D_CHRG_LOCN.LOCN_KEY )
AND ( CURRENT_VEH_LOCN.LOCN_KEY=PTL_EDW.F_VEH_LOCN.LOCN_KEY )
AND ( CURRENT_VEH.SCD_FLG='A' )
AND ( CURRENT_VEH.CONTR_GRP='P' )
AND ( CURRENT_VEH.CORP_CD=PTL_EDW.D_VEHICLE.CORP_CD and CURRENT_VEH.UNIT_NUM=PTL_EDW.D_VEHICLE.UNIT_NUM )
AND ( CURRENT_VEH.VEH_KEY=PTL_EDW.F_VEH_LOCN.VEH_KEY )
AND ( PTL_HOLD.R_COMP_CODES.COMP_CD=PTL_EDW.F_RO_DETL.COMP_CD )
AND
   ( 'Accounting Month' = 'RO Date' )
   AND
   ( '2500' = 'NO-MIN'
OR    EXISTS(SELECT RO_TOTAL_COST.RO_LOCN_KEY, RO_TOTAL_COST.ORIGINAL_RO_NUM
FROM      PTL_EDW.F_RO_DETL RO_TOTAL_COST,
    PTL_EDW.D_TIME DTIME
WHERE
    ('I' = 'I'
    OR ('I' = 'E'
        AND RO_TOTAL_COST.RO_TYP <> 'W'))
    AND RO_TOTAL_COST.RO_LOCN_KEY = PTL_EDW.F_RO_DETL.RO_LOCN_KEY
    AND RO_TOTAL_COST.ORIGINAL_RO_NUM = PTL_EDW.F_RO_DETL.ORIGINAL_RO_NUM
    AND RO_TOTAL_COST.RO_TIME_KEY = DTIME.TIME_KEY
    AND DTIME.CALENDAR_DT BETWEEN to_date('2011-JAN-01') AND to_date('2012-SEP-24')
GROUP BY
    RO_TOTAL_COST.RO_LOCN_KEY,
    RO_TOTAL_COST.ORIGINAL_RO_NUM
HAVING
Sum(RO_TOTAL_COST.RO_COST) >= TO_NUMBER(translate('2500','NO-MIN',' ')))
   AND
   PTL_EDW_D_CHRG_LOCN.DIST_NUM_SUFX IN ('014810')
   AND
   ( PTL_EDW.D_TIME.CALENDAR_DT BETWEEN to_date('2011-JAN-01') AND to_date('2012-SEP-24') )
   AND
   ( 'I' = 'I'
OR
( 'I' = 'E'
     And ( ( PTL_EDW.F_RO_DETL.RO_TYP ) <> 'W'
   AND
   ( EXISTS(SELECT * FROM PTL_HOLD.USER_GEO WHERE USERID='600125729' AND PTL_HOLD.USER_GEO.GEO IN (CURRENT_VEH_LOCN.CORP_CD, CURRENT_VEH_LOCN.REGN_NUM, CURRENT_VEH_LOCN.AREA_NUM, CURRENT_VEH_LOCN.RDIST_NUM, CURRENT_VEH_LOCN.DIST_NUM)) )
UNION
SELECT
'../../opendoc/',
'&hideSave=true&hideEdit=true&hideRefresh=true&hideUserPromptInput=true',
'Data As Of:',
'Run Date:',
ptl_hold.get_stgextr_time('FACT_FPNA_RO'),
'Accounting Month',
PTL_EDW.F_RO_DETL.RO_TYP,
PTL_EDW.D_CUSTOMER.CUST_NUM,
(PTL_EDW.D_CUSTOMER.CUST_NUM )||' - '||( PTL_EDW.D_CUSTOMER.CUST_PRIME_NM),
PTL_EDW.D_CUSTOMER.BILL_GRP,
CASE WHEN PTL_EDW.D_LOCN.CORP_CD='HPTL' THEN 'US' ELSE CASE WHEN PTL_EDW.D_LOCN.CORP_CD='2000' THEN 'CANADA' ELSE 'UNKNOWN' END END,
PTL_EDW.D_LOCN.REGN_NUM,
PTL_EDW.D_LOCN.REGN_NUM ||' - '||PTL_EDW.D_LOCN.REGN_NM,
PTL_EDW.D_LOCN.AREA_NUM,
PTL_EDW.D_LOCN.AREA_NUM||' - '||PTL_EDW.D_LOCN.AREA_NM,
PTL_EDW.D_LOCN.RDIST_NUM,
PTL_EDW.D_LOCN.RDIST_NUM||' - '||PTL_EDW.D_LOCN.RDIST_NM,
PTL_EDW.D_LOCN.DIST_NUM,
PTL_EDW.D_LOCN.DIST_NUM||' - '||PTL_EDW.D_LOCN.DIST_NM,
CASE WHEN TRIM(PTL_EDW.D_VEHICLE.VEH_CAP_STAT) IN ('ACTIVE','ACCRUED') THEN 'Active' ELSE 'Inactive' END,
DECODE(PTL_EDW.D_VEHICLE.CONTR_GRP, 'X' ,'NON-CONTRACT',PTL_EDW.D_VEHICLE.VEH_CAT),
PTL_EDW.D_VEHICLE.VEH_UNIT_TYP,
PTL_EDW.D_VEHICLE.VEH_MODL_YR,
PTL_EDW.D_VEHICLE.VEH_MAKE,
PTL_EDW.D_VEHICLE.VEH_MODEL,
CASE WHEN ( PTL_HOLD.R_COMP_CODES.COMP_CD ) IN ('057','061') THEN 'Accident/Incident' ELSE 'Non-Accident/Incident' END,
PTL_HOLD.R_COMP_CODES.COMP_CD,
PTL_HOLD.R_COMP_CODES.COMP_DESC,
PTL_HOLD.R_COMP_CODES.COMP_CD||' - '||PTL_HOLD.R_COMP_CODES.COMP_DESC,
PTL_EDW.D_VEHICLE.UNIT_NUM,
PTL_EDW_D_RO_LOCN.DIST_NUM || PTL_EDW_D_RO_LOCN.DIST_SUFX || PTL_EDW.F_RO_DETL.ORIGINAL_RO_NUM,
PTL_EDW_D_RO_LOCN.DIST_NUM || PTL_EDW_D_RO_LOCN.DIST_SUFX || PTL_EDW.F_RO_DETL.ORIGINAL_RO_NUM || PTL_EDW.F_RO_DETL.RO_SEQ_NUM
PTL_EDW.F_RO_DETL.RO_SRC,
PTL_EDW.F_RO_DETL.TOTAL_LABOR_HRS,
PTL_EDW.F_RO_DETL.TOTAL_LABOR_COST,
PTL_EDW.F_RO_DETL.OUT_COST,
PTL_EDW.F_RO_DETL.PARTS_COST,
PTL_EDW.F_RO_DETL.RO_COST,
TO_CHAR(PTL_EDW_D_RO_LOCN.LOCN_KEY),
PTL_EDW.F_RO_DETL.RO_NUM,
PTL_EDW.F_RO_DETL.RO_SEQ_NUM,
PTL_EDW.F_RO_DETL.ORIGINAL_RO_NUM
FROM
PTL_EDW.F_RO_DETL,
PTL_EDW.D_CUSTOMER,
PTL_EDW.D_LOCN,
PTL_EDW.D_VEHICLE,
PTL_HOLD.R_COMP_CODES,
PTL_EDW.D_LOCN PTL_EDW_D_RO_LOCN,
PTL_EDW.D_LOCN PTL_EDW_D_CHRG_LOCN,
PTL_EDW.D_LOCN CURRENT_VEH_LOCN,
PTL_EDW.F_VEH_LOCN,
PTL_EDW.D_VEHICLE CURRENT_VEH
WHERE
( PTL_EDW.F_RO_DETL.CUST_KEY=PTL_EDW.D_CUSTOMER.CUST_KEY )
AND ( PTL_EDW.F_RO_DETL.LOCN_KEY=PTL_EDW.D_LOCN.LOCN_KEY )
AND ( PTL_EDW.D_VEHICLE.VEH_KEY=PTL_EDW.F_RO_DETL.VEH_KEY )
AND ( PTL_EDW_D_RO_LOCN.LOCN_KEY=PTL_EDW.F_RO_DETL.RO_LOCN_KEY )
AND ( PTL_EDW.F_RO_DETL.CHRG_LOCN_KEY=PTL_EDW_D_CHRG_LOCN.LOCN_KEY )
AND ( CURRENT_VEH_LOCN.LOCN_KEY=PTL_EDW.F_VEH_LOCN.LOCN_KEY )
AND ( CURRENT_VEH.SCD_FLG='A' )
AND ( CURRENT_VEH.CONTR_GRP='P' )
AND ( CURRENT_VEH.CORP_CD=PTL_EDW.D_VEHICLE.CORP_CD and CURRENT_VEH.UNIT_NUM=PTL_EDW.D_VEHICLE.UNIT_NUM )
AND ( CURRENT_VEH.VEH_KEY=PTL_EDW.F_VEH_LOCN.VEH_KEY )
AND ( PTL_HOLD.R_COMP_CODES.COMP_CD=PTL_EDW.F_RO_DETL.COMP_CD )
AND
   ( 'Accounting Month' = 'Accounting Month' )
   AND
   ( '2500' = 'NO-MIN'
OR           EXISTS(SELECT RO_TOTAL_COST.RO_LOCN_KEY, RO_TOTAL_COST.ORIGINAL_RO_NUM
FROM      PTL_EDW.F_RO_DETL RO_TOTAL_COST
WHERE
    ('I' = 'I'
    OR ('I' = 'E'
        AND RO_TOTAL_COST.RO_TYP <> 'W'))
    AND RO_TOTAL_COST.RO_LOCN_KEY = PTL_EDW.F_RO_DETL.RO_LOCN_KEY
    AND RO_TOTAL_COST.ORIGINAL_RO_NUM = PTL_EDW.F_RO_DETL.ORIGINAL_RO_NUM
    AND RO_TOTAL_COST.PARTITION_KEY BETWEEN
       to_number(to_char(to_date('2011-JAN-01','YYYY-MON-DD'),'yyyymm'))
       AND to_number(to_char(to_date('2012-SEP-24','YYYY-MON-DD'),'yyyymm'))
GROUP BY
    RO_TOTAL_COST.RO_LOCN_KEY,
    RO_TOTAL_COST.ORIGINAL_RO_NUM
HAVING
Sum(RO_TOTAL_COST.RO_COST) >= TO_NUMBER(translate('2500','NO-MIN',' '))) )
   AND
   PTL_EDW_D_CHRG_LOCN.DIST_NUM_SUFX IN ('014810')
   AND
   ( (PTL_EDW.F_RO_DETL.PARTITION_KEY BETWEEN
       to_number(to_char(to_date('2011-JAN-01','YYYY-MON-DD'),'yyyymm'))
       AND to_number(to_char(to_date('2012-SEP-24','YYYY-MON-DD'),'yyyymm'))
   AND
   ( 'I' = 'I'
OR
( 'I' = 'E'
     And ( ( PTL_EDW.F_RO_DETL.RO_TYP ) <> 'W'
   AND
   ( EXISTS(SELECT * FROM PTL_HOLD.USER_GEO WHERE USERID='600125729' AND PTL_HOLD.USER_GEO.GEO IN (CURRENT_VEH_LOCN.CORP_CD, CURRENT_VEH_LOCN.REGN_NUM, CURRENT_VEH_LOCN.AREA_NUM, CURRENT_VEH_LOCN.RDIST_NUM, CURRENT_VEH_LOCN.DIST_NUM)) )
);Thank you.

For your own sanity, you should learn to format your code. For the sake of the forum members, you should preserve the formatting by using the \ tags.
I've done that for you here, and some other questions popped right out. Look for my embedded comments near the bottomSELECT
'../../opendoc/',
'&hideSave=true&hideEdit=true&hideRefresh=true&hideUserPromptInput=true'
'Data As Of:' ,
'Run Date:' ,
ptl_hold.get_stgextr_time('FACT_FPNA_RO'),
'RO Date' ,
PTL_EDW.F_RO_DETL.RO_TYP ,
PTL_EDW.D_CUSTOMER.CUST_NUM ,
(PTL_EDW.D_CUSTOMER.CUST_NUM )
||' - '
||( PTL_EDW.D_CUSTOMER.CUST_PRIME_NM),
PTL_EDW.D_CUSTOMER.BILL_GRP ,
CASE
WHEN PTL_EDW.D_LOCN.CORP_CD='HPTL'
THEN 'US'
ELSE
CASE
WHEN PTL_EDW.D_LOCN.CORP_CD='2000'
THEN 'CANADA'
ELSE 'UNKNOWN'
END
END ,
PTL_EDW.D_LOCN.REGN_NUM,
PTL_EDW.D_LOCN.REGN_NUM
||' - '
||PTL_EDW.D_LOCN.REGN_NM,
PTL_EDW.D_LOCN.AREA_NUM ,
PTL_EDW.D_LOCN.AREA_NUM
||' - '
||PTL_EDW.D_LOCN.AREA_NM,
PTL_EDW.D_LOCN.RDIST_NUM,
PTL_EDW.D_LOCN.RDIST_NUM
||' - '
||PTL_EDW.D_LOCN.RDIST_NM,
PTL_EDW.D_LOCN.DIST_NUM ,
PTL_EDW.D_LOCN.DIST_NUM
||' - '
||PTL_EDW.D_LOCN.DIST_NM,
CASE
WHEN TRIM(PTL_EDW.D_VEHICLE.VEH_CAP_STAT) IN
('ACTIVE','ACCRUED')
THEN 'Active'
ELSE 'Inactive'
END,
DECODE(PTL_EDW.D_VEHICLE.CONTR_GRP, 'X' ,
'NON-CONTRACT',PTL_EDW.D_VEHICLE.VEH_CAT),
PTL_EDW.D_VEHICLE.VEH_UNIT_TYP ,
PTL_EDW.D_VEHICLE.VEH_MODL_YR ,
PTL_EDW.D_VEHICLE.VEH_MAKE ,
PTL_EDW.D_VEHICLE.VEH_MODEL ,
CASE
WHEN
PTL_HOLD.R_COMP_CODES.COMP_CD
IN ('057','061')
THEN 'Accident/Incident'
ELSE 'Non-Accident/Incident'
END ,
PTL_HOLD.R_COMP_CODES.COMP_CD ,
PTL_HOLD.R_COMP_CODES.COMP_DESC,
PTL_HOLD.R_COMP_CODES.COMP_CD
||' - '
||PTL_HOLD.R_COMP_CODES.COMP_DESC,
PTL_EDW.D_VEHICLE.UNIT_NUM ,
PTL_EDW_D_RO_LOCN.DIST_NUM
|| PTL_EDW_D_RO_LOCN.DIST_SUFX
|| PTL_EDW.F_RO_DETL.ORIGINAL_RO_NUM,
PTL_EDW_D_RO_LOCN.DIST_NUM
|| PTL_EDW_D_RO_LOCN.DIST_SUFX
|| PTL_EDW.F_RO_DETL.ORIGINAL_RO_NUM
|| PTL_EDW.F_RO_DETL.RO_SEQ_NUM ,
PTL_EDW.F_RO_DETL.RO_SRC ,
PTL_EDW.F_RO_DETL.TOTAL_LABOR_HRS ,
PTL_EDW.F_RO_DETL.TOTAL_LABOR_COST ,
PTL_EDW.F_RO_DETL.OUT_COST ,
PTL_EDW.F_RO_DETL.PARTS_COST ,
PTL_EDW.F_RO_DETL.RO_COST ,
TO_CHAR(PTL_EDW_D_RO_LOCN.LOCN_KEY),
PTL_EDW.F_RO_DETL.RO_NUM ,
PTL_EDW.F_RO_DETL.RO_SEQ_NUM ,
PTL_EDW.F_RO_DETL.ORIGINAL_RO_NUM
FROM
PTL_EDW.F_RO_DETL ,
PTL_EDW.D_CUSTOMER ,
PTL_EDW.D_LOCN ,
PTL_EDW.D_VEHICLE ,
PTL_HOLD.R_COMP_CODES ,
PTL_EDW.D_LOCN PTL_EDW_D_RO_LOCN ,
PTL_EDW.D_LOCN PTL_EDW_D_CHRG_LOCN,
PTL_EDW.D_TIME ,
PTL_EDW.D_LOCN CURRENT_VEH_LOCN ,
PTL_EDW.F_VEH_LOCN ,
PTL_EDW.D_VEHICLE CURRENT_VEH
WHERE
PTL_EDW.F_RO_DETL.CUST_KEY =
PTL_EDW.D_CUSTOMER.CUST_KEY
AND
PTL_EDW.F_RO_DETL.LOCN_KEY =
PTL_EDW.D_LOCN.LOCN_KEY
AND
PTL_EDW.D_TIME.TIME_KEY =
PTL_EDW.F_RO_DETL.RO_TIME_KEY
AND
PTL_EDW.D_VEHICLE.VEH_KEY =
PTL_EDW.F_RO_DETL.VEH_KEY
AND
PTL_EDW_D_RO_LOCN.LOCN_KEY =
PTL_EDW.F_RO_DETL.RO_LOCN_KEY
AND
PTL_EDW.F_RO_DETL.CHRG_LOCN_KEY=
PTL_EDW_D_CHRG_LOCN.LOCN_KEY
AND
CURRENT_VEH_LOCN.LOCN_KEY =
PTL_EDW.F_VEH_LOCN.LOCN_KEY
AND
CURRENT_VEH.SCD_FLG ='A'
AND
CURRENT_VEH.CONTR_GRP ='P'
AND
CURRENT_VEH.CORP_CD =
PTL_EDW.D_VEHICLE.CORP_CD
AND CURRENT_VEH.UNIT_NUM =
PTL_EDW.D_VEHICLE.UNIT_NUM
AND
CURRENT_VEH.VEH_KEY =
PTL_EDW.F_VEH_LOCN.VEH_KEY
AND
PTL_HOLD.R_COMP_CODES.COMP_CD =
PTL_EDW.F_RO_DETL.COMP_CD
AND
'Accounting Month' = 'RO Date'
AND
'2500' = 'NO-MIN'
OR EXISTS
SELECT
RO_TOTAL_COST.RO_LOCN_KEY,
RO_TOTAL_COST.ORIGINAL_RO_NUM
FROM
PTL_EDW.F_RO_DETL RO_TOTAL_COST,
PTL_EDW.D_TIME DTIME
WHERE
'I' = 'I'
OR
'I' = 'E'
AND RO_TOTAL_COST.RO_TYP 'W'
AND RO_TOTAL_COST.RO_LOCN_KEY =
PTL_EDW.F_RO_DETL.RO_LOCN_KEY
AND RO_TOTAL_COST.ORIGINAL_RO_NUM =
PTL_EDW.F_RO_DETL.ORIGINAL_RO_NUM
AND RO_TOTAL_COST.RO_TIME_KEY =
DTIME.TIME_KEY
AND DTIME.CALENDAR_DT BETWEEN to_date(
'2011-JAN-01') AND to_date(
'2012-SEP-24')
GROUP BY
RO_TOTAL_COST.RO_LOCN_KEY,
RO_TOTAL_COST.ORIGINAL_RO_NUM
HAVING
SUM(RO_TOTAL_COST.RO_COST) >= TO_NUMBER
(TRANSLATE('2500','NO-MIN',' '))
AND PTL_EDW_D_CHRG_LOCN.DIST_NUM_SUFX IN (
'014810')
AND
PTL_EDW.D_TIME.CALENDAR_DT BETWEEN to_date(
'2011-JAN-01') AND to_date('2012-SEP-24')
AND
'I' = 'I'
OR
'I' = 'E'
AND
PTL_EDW.F_RO_DETL.RO_TYP
'W'
AND
EXISTS
SELECT
FROM
PTL_HOLD.USER_GEO
WHERE
USERID ='600125729'
AND PTL_HOLD.USER_GEO.GEO IN (
CURRENT_VEH_LOCN.CORP_CD,
CURRENT_VEH_LOCN.REGN_NUM,
CURRENT_VEH_LOCN.AREA_NUM,
CURRENT_VEH_LOCN.RDIST_NUM,
CURRENT_VEH_LOCN.DIST_NUM)
UNION
SELECT
'../../opendoc/',
'&hideSave=true&hideEdit=true&hideRefresh=true&hideUserPromptInput=true'
'Data As Of:' ,
'Run Date:' ,
ptl_hold.get_stgextr_time('FACT_FPNA_RO'),
'Accounting Month' ,
PTL_EDW.F_RO_DETL.RO_TYP ,
PTL_EDW.D_CUSTOMER.CUST_NUM ,
(PTL_EDW.D_CUSTOMER.CUST_NUM )
||' - '
||( PTL_EDW.D_CUSTOMER.CUST_PRIME_NM),
PTL_EDW.D_CUSTOMER.BILL_GRP ,
CASE
WHEN PTL_EDW.D_LOCN.CORP_CD='HPTL'
THEN 'US'
ELSE
CASE
WHEN PTL_EDW.D_LOCN.CORP_CD='2000'
THEN 'CANADA'
ELSE 'UNKNOWN'
END
END ,
PTL_EDW.D_LOCN.REGN_NUM,
PTL_EDW.D_LOCN.REGN_NUM
||' - '
||PTL_EDW.D_LOCN.REGN_NM,
PTL_EDW.D_LOCN.AREA_NUM ,
PTL_EDW.D_LOCN.AREA_NUM
||' - '
||PTL_EDW.D_LOCN.AREA_NM,
PTL_EDW.D_LOCN.RDIST_NUM,
PTL_EDW.D_LOCN.RDIST_NUM
||' - '
||PTL_EDW.D_LOCN.RDIST_NM,
PTL_EDW.D_LOCN.DIST_NUM ,
PTL_EDW.D_LOCN.DIST_NUM
||' - '
||PTL_EDW.D_LOCN.DIST_NM,
CASE
WHEN TRIM(PTL_EDW.D_VEHICLE.VEH_CAP_STAT) IN
('ACTIVE','ACCRUED')
THEN 'Active'
ELSE 'Inactive'
END,
DECODE(PTL_EDW.D_VEHICLE.CONTR_GRP, 'X' ,
'NON-CONTRACT',PTL_EDW.D_VEHICLE.VEH_CAT),
PTL_EDW.D_VEHICLE.VEH_UNIT_TYP ,
PTL_EDW.D_VEHICLE.VEH_MODL_YR ,
PTL_EDW.D_VEHICLE.VEH_MAKE ,
PTL_EDW.D_VEHICLE.VEH_MODEL ,
CASE
WHEN
PTL_HOLD.R_COMP_CODES.COMP_CD
IN ('057','061')
THEN 'Accident/Incident'
ELSE 'Non-Accident/Incident'
END ,
PTL_HOLD.R_COMP_CODES.COMP_CD ,
PTL_HOLD.R_COMP_CODES.COMP_DESC,
PTL_HOLD.R_COMP_CODES.COMP_CD
||' - '
||PTL_HOLD.R_COMP_CODES.COMP_DESC,
PTL_EDW.D_VEHICLE.UNIT_NUM ,
PTL_EDW_D_RO_LOCN.DIST_NUM
|| PTL_EDW_D_RO_LOCN.DIST_SUFX
|| PTL_EDW.F_RO_DETL.ORIGINAL_RO_NUM,
PTL_EDW_D_RO_LOCN.DIST_NUM
|| PTL_EDW_D_RO_LOCN.DIST_SUFX
|| PTL_EDW.F_RO_DETL.ORIGINAL_RO_NUM
|| PTL_EDW.F_RO_DETL.RO_SEQ_NUM ,
PTL_EDW.F_RO_DETL.RO_SRC ,
PTL_EDW.F_RO_DETL.TOTAL_LABOR_HRS ,
PTL_EDW.F_RO_DETL.TOTAL_LABOR_COST ,
PTL_EDW.F_RO_DETL.OUT_COST ,
PTL_EDW.F_RO_DETL.PARTS_COST ,
PTL_EDW.F_RO_DETL.RO_COST ,
TO_CHAR(PTL_EDW_D_RO_LOCN.LOCN_KEY),
PTL_EDW.F_RO_DETL.RO_NUM ,
PTL_EDW.F_RO_DETL.RO_SEQ_NUM ,
PTL_EDW.F_RO_DETL.ORIGINAL_RO_NUM
FROM
PTL_EDW.F_RO_DETL ,
PTL_EDW.D_CUSTOMER ,
PTL_EDW.D_LOCN ,
PTL_EDW.D_VEHICLE ,
PTL_HOLD.R_COMP_CODES ,
PTL_EDW.D_LOCN PTL_EDW_D_RO_LOCN ,
PTL_EDW.D_LOCN PTL_EDW_D_CHRG_LOCN,
PTL_EDW.D_LOCN CURRENT_VEH_LOCN ,
PTL_EDW.F_VEH_LOCN ,
PTL_EDW.D_VEHICLE CURRENT_VEH
WHERE
PTL_EDW.F_RO_DETL.CUST_KEY =
PTL_EDW.D_CUSTOMER.CUST_KEY
AND
PTL_EDW.F_RO_DETL.LOCN_KEY =
PTL_EDW.D_LOCN.LOCN_KEY
AND
PTL_EDW.D_VEHICLE.VEH_KEY =
PTL_EDW.F_RO_DETL.VEH_KEY
AND
PTL_EDW_D_RO_LOCN.LOCN_KEY =
PTL_EDW.F_RO_DETL.RO_LOCN_KEY
AND
PTL_EDW.F_RO_DETL.CHRG_LOCN_KEY=
PTL_EDW_D_CHRG_LOCN.LOCN_KEY
AND
CURRENT_VEH_LOCN.LOCN_KEY =
PTL_EDW.F_VEH_LOCN.LOCN_KEY
AND
CURRENT_VEH.SCD_FLG ='A'
AND
CURRENT_VEH.CONTR_GRP ='P'
AND
CURRENT_VEH.CORP_CD =
PTL_EDW.D_VEHICLE.CORP_CD
AND CURRENT_VEH.UNIT_NUM =
PTL_EDW.D_VEHICLE.UNIT_NUM
AND
CURRENT_VEH.VEH_KEY =
PTL_EDW.F_VEH_LOCN.VEH_KEY
AND
PTL_HOLD.R_COMP_CODES.COMP_CD =
PTL_EDW.F_RO_DETL.COMP_CD
AND
'Accounting Month' = 'Accounting Month'
AND
'2500' = 'NO-MIN'
OR EXISTS
SELECT
RO_TOTAL_COST.RO_LOCN_KEY,
RO_TOTAL_COST.ORIGINAL_RO_NUM
FROM
PTL_EDW.F_RO_DETL RO_TOTAL_COST
WHERE
'I' = 'I'
/* what's the point? A literal always equals itself. /*
OR
'I' = 'E'
/* again, what's the point? This will never be true */
AND RO_TOTAL_COST.RO_TYP 'W'
AND RO_TOTAL_COST.RO_LOCN_KEY =
PTL_EDW.F_RO_DETL.RO_LOCN_KEY
AND RO_TOTAL_COST.ORIGINAL_RO_NUM =
PTL_EDW.F_RO_DETL.ORIGINAL_RO_NUM
AND RO_TOTAL_COST.PARTITION_KEY BETWEEN
to_number(TO_CHAR(to_date('2011-JAN-01','YYYY-MON-DD'),'yyyymm')) AND
to_number(TO_CHAR(to_date('2012-SEP-24','YYYY-MON-DD'),'yyyymm'))
/* what is the data type of PARTITION_KEY? This manipulation strongly suggests that it should be DATE and isn't.
GROUP BY
RO_TOTAL_COST.RO_LOCN_KEY,
RO_TOTAL_COST.ORIGINAL_RO_NUM
HAVING
SUM(RO_TOTAL_COST.RO_COST) >= TO_NUMBER(TRANSLATE('2500','NO-MIN',' '))
AND PTL_EDW_D_CHRG_LOCN.DIST_NUM_SUFX IN (
'014810')
AND
PTL_EDW.F_RO_DETL.PARTITION_KEY BETWEEN
to_number(TO_CHAR(to_date('2011-JAN-01',
'YYYY-MON-DD'),'yyyymm')) AND to_number(
TO_CHAR(to_date('2012-SEP-24',
'YYYY-MON-DD'),'yyyymm'))
AND
'I' = 'I'
OR
'I' = 'E'
AND
PTL_EDW.F_RO_DETL.RO_TYP
'W'
AND
EXISTS
SELECT
FROM
PTL_HOLD.USER_GEO
WHERE
USERID ='600125729'
AND PTL_HOLD.USER_GEO.GEO IN (
CURRENT_VEH_LOCN.CORP_CD,
CURRENT_VEH_LOCN.REGN_NUM,
CURRENT_VEH_LOCN.AREA_NUM,
CURRENT_VEH_LOCN.RDIST_NUM,
CURRENT_VEH_LOCN.DIST_NUM)

Edit option doesn't appear

If I connect with a user that isn't the owner of a table, than I can't see "Edit" option when I right-click on the table, and so I can't see easily the colums associated with constraints (for example)
Thank you

The edit option doesn't work in other users. (disabled.)
I do the following test :
1. connect with system (Role dba)
2. select table in "other user"
-> edit option is disabled
3. close table tab
4. select table in my owned object
-> edit option is enabled
2. select table in "other user"
-> edit option is enabled (and work)
(I test it with 9i and 10g and i have same problem)
I activate the debugging but i don't see error for that.
Eric.
Here my non-default parameters :
Name     Value
audit_sys_operations     TRUE
audit_trail     OS
compatible     10.2.0
control_file_record_keep_time     10
db_block_size     8192
db_domain     nbb
db_files     200
db_flashback_retention_target     4320
db_recovery_file_dest_size     6442450944
dispatchers     (ADDRESS=(PROTOCOL=TCP)(HOST=ORACLE))
filesystemio_options     SETALL
global_names     FALSE
job_queue_processes     1
log_buffer     6156288
max_dispatchers     10
max_shared_servers     30
nls_date_format     YYYY-MM-DD HH24:MI:SS
nls_language     AMERICAN
nls_territory     AMERICA
nls_timestamp_format     YYYY-MM-DD HH24:MI:SSXFF
open_cursors     1024
pga_aggregate_target     314572800
processes     400
sessions     1200
sga_max_size     1073741824
sga_target     998244352
shared_servers     2
undo_management     AUTO
undo_retention     21600
Here my user roles :
DBA
SELECT_CATALOG_ROLE
HS_ADMIN_ROLE
EXECUTE_CATALOG_ROLE
DELETE_CATALOG_ROLE
EXP_FULL_DATABASE
IMP_FULL_DATABASE
GATHER_SYSTEM_STATISTICS
SCHEDULER_ADMIN
AQ_ADMINISTRATOR_ROLE

I have a mac running iPhoto, please advise when I copy the photo to add to a document while creating a pictorial when it is pasted it turns black, I have tried many different methods to over come the issue but unsuccessful

My 6 month old Mac is using iPhoto. Please advise when I copy the photo from iPhoto to add to a word document while creating a pictorial artical as soon as it is pasted the picture it turns black, I have tried many different methods to over come the issue but unsuccessful. In the past the iPhoo was default for direct download from a card, This I have now changed but in the meantime there are photographs that I need to use. I understand window completly but still on the nursery steps with Mac.
Please advise Heather

As I said before I am reluctanct to delete and reinstall the iPhoto as I only have the one copy of the file i am using stored in iphoto file and I caint loose them.
All storage hardware and all computers will fail. Volumes will get corrupted. Mistakes will happen.
Please learn from our past mistakes and from our past data losses: please have and keep regular backups.
Either via Time Machine (which is marvelously transparent, and very easy), or backups created via some other mechanisms and tools. Old Toad recommends an external disk, and that's very effective. If this is a portable Mac, then Time Capsule devices are also very handy, as you don't have to remember to connect the backup device; so long as the Mac is within wireless range of the Time Capsule, backups will happen.
Time Machine backups can also be used to replace your files or even to upgrade to a new Mac, should your computer be lost or stolen, or should your computer or your storage fail.
If you have not already seen these, Mac Basics and Find Out How could be interesting.
As for your photos... I wouldn't expect this to be iPhoto and wouldn't go for an iPhoto reinstall as the first step, I'd tend to wonder if this is a bug or feature in Microsoft Word, or possibly a format incompatibility with what Office supports. iPhoto organizes and edits the photos that are stored in your ~/Pictures media directory. Try using iWork (if you have that) or some other tool (Apple Mail) that accepts and processes photos, and see if you can localize the problem. Depending on the image formats used, also see if exporting the picture from iWork into a jpeg-format picture — something other than the image format you're currently using with the Microsoft Office imports — works. (FWIW, I use iWork for reading and writing Microsoft Office documents as well as Pages and Keynote files, and have been using iPhoto with those and other tools for many years, and haven't encountered these blacked-out images.)

Ipone 4s display suddenly doesn't work any more. i can't even unlock it as it put the numbers itself. and if i am lucky to unlock it opens apps and does everything whenever my finger comes near without even touching it. can anyone help?

ipone 4s display suddenly doesn't work any more. most of the time i can't even unlock my iphone as it puts the numbers itself. and if i am lucky to unlock it opens apps and does everything else whenever my finger comes near the display without even touching it. I did reset and also updated my operating system. But the problem stills shows up... can anyone help please?

Contact iTunes Customer Service and request assistance
Use this Link > Apple Support iTunes Store Contact

In my 4s display option doesn't come to change colours when I go to Setting-General. I am bored with blue colour. Please advise.

Similar Messages

Maybe you are looking for