Do I have individual bit direction control in strobed I/O mode for DAQ 653x device?

Regard to DAQ 653x device:
I need to set the bits' direction (I/O) individually while working in Strobed I/O mode. I also need the wired-OR fiture in that mode. And actually the wired-OR is more critical for me. Do I have wired-OR option in strobed IO mode?

Greetings,
While running in Strobed I/O mode you do not have the ability to use wired-OR. Please refer to the following Knowledge Base for more information.
What Is Tri-State and Which DAQ Devices Support It?
http://digital.ni.com/public.nsf/websearch/09B559BE292C75DB8625698500640E0A?OpenDocument
Refering to the PCI-653X User Manual in the Device Overview section, we find that the 32 data lines are individually configurable as input or output, grouped into four 8-bit ports. You may set each line for input or output by specifying their direction in the line direction map of the DIO Port Config VI or driver call.
653X User Manual
http://digital.ni.com/manuals.nsf/websearch/EDE443F5C700373A862569B90072D26F?OpenDocument&node=132100_US
Regard
s,
Justin Britten
Applications Engineer
National Instruments

Similar Messages

I bought Adobe Elements 12; I cannot use panorama photomerge, I have followed the directions to go to Full Edit mode in edit workspace choose File New Photomerge. However the Photomerge does not work, it does not respond. The only thing I can come u

I bought Adobe Elements 12; I cannot use panorama photomerge, I have followed the directions to go to Full Edit mode in edit workspace> choose File> New> Photomerge. However the Photomerge does not work, it does not respond.
The only thing I can come up with is that I found a blog that said that in the Trial version Photomerge does not work, however I do Not have the Trial version, I did at one time but I purchase Adobe Elements. Thank you.

The blog was incorrect. Photomerge should work in the trial, too.
When things get weird in PSE the first thing to do is to delete the prefs. Go to the editor preferences>general, click this button and restart the editor:

In preview all is good...burning dvd the music cuts out 2 times in 4 songs...i have turned off all other programs, sleep and energy mode for battery...multiple tries... same result ...help

IDVD - in preview all is good...burning dvd the music cuts out 2 times in 4 songs...i have turned off all other programs, sleep and energy mode for battery...multiple tries... same result ...help

Hi
No audio on DVD disc.
Most common origin.
1. Imported audio from iTunes.
• In iTunes copy out as an audio-CD .aiff
• Use this in Your movie project
2. Low - Free Space on Start-up/Boot/Internal/Mac OS Hard disk makes it hard for iMovie to work as intended.
Down to 1.3 GB and it doesn’t work - especially audio don’t migrate over to Media Browser
(iM’08 & 09)
3. Material in iMovie’08 & 09 - Shared to Media Browser and here selected as Large
large.m4v. It silenced out this project in iDVD. By making a slight alteration - provocing it to ask for a new Share/Publish to Media Browser and here selecting 640x480 - and audio was back when a new iDVD project was created including this movie.
176x144
480x360
640x480
720x540 960x540
4. Strange audio formats like .mp3, .avi etc.
• Change them to .aiff. Use an audio editor like Audacity (free)
5. Main audio is set to off in System Preferences - Does this by it self - Don’t know why
Cheque Audio-Out resp. Audio-In
6. Ed Hanna
Had the same problem; some Googling around gave me a kludgy, but effective fix
Downgrade Perian from recent versions back to version 1.0.
That worked for me, and so far I haven't encountered any deficiencies—except it takes more advanced versions of Perian to enable QuickTime to handle subtitles in .srt format—that I have noticed.
7. GarageBand fix.
In this set audio to 44.1 kHz (Klaus1 suggestion)
(if this don’t work try 48 kHz - me guessing)
Before burning the DVD.
• Do a DiskImage (File menu and down)
• Double click on the .img file
• Test it with Apple DVD-player
If it’s OK then make Your DVD.
Burn at x1 speed.... (or x4)
• In iDVD 08 - or - 09
• Burn from DiskImage with Apple’s Disk Utilities application
• OR burn with Roxio Toast™ if You got it
Yours Bengt W

Converting 16 Bit Integer to Individual Bits

I have a 16 bit Binary Integer and I need to convert this into Individual bits so we can perform some data manipulation. I know there is a easy solution, but I just cant figure it out. I attached what I was trying to do, remove the 16 bits and make a 1D array with 16 elements, then remove each element from the array. This may be the wrong approach to this problem. Any help would be appreciated. Thanks in advance.

It seems your input is a I16 integer, so it is really bad to have the representation of the control as U32. Makes no sense.
Anyway, here's a quick alternative that seems to give the desired result with a code size of less than a postage stamp. see if it works for you.
(note that we get different results for some input values. Do you have the original documentation for the conversion?)
Message Edited by altenbach on 05-09-2007 10:25 AM
LabVIEW Champion . Do more with less code and in less time .
Attachments:
scaleInteger.png ‏4 KB
ScaleInteger.vi ‏38 KB

HT1420 I have the new version of the macbook pro and I cannot find authorize this computer anywhere on itunes. I have read the directions multiple times and still cannot find it. Please help!

I have the newer version of the macbook pro and I have read the directions on how to authorize your computer to let you download previous song purchases from icloud onto your laptop, but I cannot find where it says "authorize this computer" at all. I have looked for it everywhere and still cannot find it. Please help!

Authorization and Deauthorization
Macs: iTunes Store- About authorization and deauthorization.
Windows: How to Authorize or Deauthorize iTunes | PCWorld.
In iTunes you use the Authorize This Computer or De-authorize This Computer option under the Store menu in iTunes' menubar. For Windows use the ALT-S keys to access it. Or turn on Windows 7 and 8 iTunes menus: iTunes- Turning on iTunes menus in Windows 8 and 7.
More On De-authorizing Computers (contributed by user John Galt)
You can de-authorize individual computers, but only by using those computers. The only other option is to "de-authorize all" from your iTunes account.
1. Open iTunes on a computer
2. From the Store menu, select "View my Account..."
3. Sign in with your Apple ID and password.
4. Under "Computer Authorizations" select "De-authorize All".
5. Authorize each computer you still have, as you may require.
You may only do this once per year.
After you "de-authorize all" your authorized computers, re-authorize each one as required.
If you have de-authorized all computers and need to do it again, but your year has not elapsed, then contact: Apple - Support - iTunes - Contact Us.

I have 64 bit Vista Home Premium. I need to download Flash in order to use Premier Pro CS4. Please help me so I can use your program.

Dear Folks:
I have the trial version of Adobe Premier Pro CS4, and I have 64 bit Vista Home Premium. I can not download Flash in order to view the Help Program Tutorial. I am a student at CCBC Essex Campus, and I need to assemble a three minute video for a class. I have Internet Explorer (latest version), and I also have Firefox. Please help me with a solution.
Thank You,
Dan Pasten
111 Alcock Road
Essex, Md. 21221-2110
United States of America
(410) 686-8067

For easy searching, download the product user guide PDF(s)
The individual CS5 pages also have links to the earlier user guide pages
CS5 User Guides - online and PDF (right click PDF link to save PDF to your hard drive)
http://blogs.adobe.com/premiereprotraining/2010/08/help-documents-for-creative-suite-5-pdf -and-html.html
Some tutorial links... these MAY not apply to CS4, but it doesn't cost to look
http://forums.adobe.com/thread/913334
http://forums.adobe.com/thread/845731
-and http://forums.adobe.com/message/3234794
Encore http://tv.adobe.com/show/learn-encore-cs4/
A "crash course" http://forums.adobe.com/thread/761834
A Video Primer for Premiere http://forums.adobe.com/thread/498251
Premiere Tutorials http://forums.adobe.com/thread/424009
PPro Wiki http://premierepro.wikia.com/wiki/Adobe_Premiere_Pro_Wiki
Tutorial http://www.tutorialized.com/tutorials/Premiere/1
Tutorial http://www.dvxuser.com/V6/forumdisplay.php?f=21
Tutorial HD to SD w/CS4 http://bellunevideo.com/tutorials/CS4_HD2SD/CS4_HD2SD.html
Exporting to DVD http://help.adobe.com/en_US/premierepro/cs/using/WS3E252E59-6BE5-4668-A12E-4ED0348C3FDBa.h tml
And http://help.adobe.com/en_US/premierepro/cs/using/WSCDE15B03-1236-483f-BBD4-263E77B445B9.ht ml
Color correction http://forums.adobe.com/thread/892861
Photo Scaling for Video http://forums.adobe.com/thread/450798
-Too Large May = Crash http://forums.adobe.com/thread/879967
-And another crash report http://forums.adobe.com/thread/973935
After Effects Tutorials http://www.videocopilot.net/
Authoring http://www.videocopilot.net/tutorials/dvd_authoring/
Encore Tutorial http://www.precomposed.com/blog/2009/05/encore-tutorial/
And more Encore http://library.creativecow.net/articles/devis_andrew/
Surround Sound http://forums.adobe.com/thread/517372
Regions and NTSC vs PAL http://forums.adobe.com/thread/951042

I have 64-bit Vista on an HP laptop, and am having trouble with P4

I have 64-bit Vista on an HP laptop, and am having trouble with P4. When I go to the "Compatibility" tab in for the P4 .exe file, 32-bit Vista does not show up as a compatibility option. The latest version shown is XP with SP2. Am I missing something? Is there a patch or download that updates P4?(The problem I'm having is stuttering and stopping in the imported avi2 files I have downloaded from my Panasonic digital camcorder and converted from avi to avi2 using DVDate. Also, I get stuttering with digital photos - jpg files - that I want to insert in the movie with added narration.)

A.T. Romano
It gets a little complicated. This is a simplification, but I hope this
helps to visualize what's happening.
The 32 bit and 64 bit environments are separated from each other.
There are separate program files directories, separate shared dll library
directories, and even separate registry entries. You can't mix 32 and
64 bit modules, and some applications, like Internet Explorer, install
both a 32 bit and a 64 bit version on the same computer. (IE does that
so it can process web pages that use 32 bit executable controls).
Vista 64 has 32 bit emulation built-in using a subsystem called Windows
on Windows 64 or WOW64 for short. WOW64 intercepts 32 bit
application calls to the operating system and handles the 32 to 64 bit
conversions and the redirection of the file and registry locations.
The program files themselves contain flags that indicate whether they
are 32 bit and whether the file uses the 64 bit version of the file
structure.
If the program is marked 32 bit, it will run in 32 bit using WOW64.
Programs are generally installed by an installer program which places
the application files in the proper locations and writes the registry
entries and any other setup tasks that are needed. To install a 64
bit program, a 64 bit installer is needed. For 32 bit installers, the files
and registry entries are redirected to the 32 bit locations.

Jurisdiction codes 3100000000 4700000000 have different tax base control

Hi All,
When posting a invoice in MIRO we are getting error
"Jurisdiction codes 3100000000 4700000000 have different tax base control".
And Diagnosis given by SAP is
"The jurisdiction codes entered on the individual line items have different controls for determining the tax base amount (upper level 3100000000 and 4700000000). This is not allowed within a document."
The client wants a single document to be posted calculating tax with different codes.
Can any one please provide a solution to this.
Thanks for the help,
Satish

Got help from SAP

Due to our operating system we only have 32 bit, purchased lightroom 6 and download cancelled as says needs 64 bit, is there a 32 bit version i can get, otherwise need money back

due to our operating system we only have 32 bit, purchased lightroom 6 and download cancelled as says needs 64 bit, is there a 32 bit version i can get, otherwise need money back

thanks for that, but having tried the various options, still not managed to organize a refund, or anything for that matter, been on hold now for 25 minutes, first time was for 17 minutes, spoke to someone who was putting me thorough, to then have automated message saying issue could not be dealt with and it then hung up! been on to live chat and this was posted: -
Chat
24 hours a day, 7 days a week
Chat is currently closed
Which would be funny if i havent already spent 3 1/2 hours trying to sort this. I am really not enjoying my adobe experience, never known such a difficult company to speak to a 'live' person. Now on hold for 29 minutes and need to go out so nothing to be done now until tomorrow. If there is a real person from Adobe reading this, i would appreciate a call/direct email to get this resolved. now 31 minutes and I have to hang up as need to go!!! aarrgghhh!!!

I have set up iCloud control panel 3.1 for Windows 7 but when I add a contactact on my PC the information is not updating my iPhone and sames hold true for my calendar. Any suggestions?

I have set up iCloud control panel 3.1 for Windows 7 but when I add contacts on my Windows 7 desktop it is not updating to my iPhone 5 and the same holds true with my Calendar. Any suggestions? Thanks

The version that came with Microsoft Office Home and Business 2010 and says Version 14.0.7106.5003 (32 Bit) and the e-mail I have set up as POP / SMTP. Thanks for your reply.

How to Direct control to application's window after closing the popup?

Hi,
I am using 10.1.3. In my application I am unable to direct control to application's window after closing the popup, if I open any other window at the same time.
For more info see the below step:-
-> Open any popup in my application.
-> Open any new window (lets say Google.com).
-> Now restore popup on Google window.
-> Now close popup
          - control goes to Google window but not the parent application window.
How to direct control to the parent window?
Can anybody help me regarding this?
Thanx...Abhijit

Hi Abhijit,
You can do this using Javascript alone. Below are the two sample files I created.
main.html_
<html>
<head>
<title>Testing popup</title>
<script type="text/javascript">
function openPopup() {
    window.open("popup.html");
</script>
</head>
<body>
<a hr_ef="javascript:openPopup()">Open popup</a>
<input id="something" name="something" type="text" value="something">
</body>
</html>
Note: hr_ef should be href. The code tags are messing with the link.
popup.html_
<html>
<head>
<title>This is the popup window</title>
<script type="text/javascript">
function goToMain() {
    window.opener.something.focus();
</script>
</head>
<body onunload="goToMain()">
This is the popup window. Close this window to return to main window.
</body>
</html>The idea is to call a javascript function in the popup window that tries to focus on an object (eg. InputText) in the main html.
Although, one point to take note is the naming of html objects by by these ADF UI Components. If you named your form id as "*form1*" and input text id as "*something*", your input text id will end up as "*form1:something*".
Therefore, you will have to tweak the code above to the following:
<script type="text/javascript">
function goToMain() {
window.opener.form1['form1:something'].focus();
</script>Regards,
Chan Kelwin

Reinstalled 98se Only have 16 bit and 2 colors

Hi!
I just reinstalled my 98se, and in my Display > Settings> I only have 16 bit and 2 colors. There is no 256 bit high color--or any other color. My monitor looks like Im in Safe Mode. This sounds like a VGA problem but I couldn't seem to find a driver for the problem. I have the MS6390 board with the Standard PCI Graphics Adapter, but Im lost. Sure would appreciate any suggestions.
Mocha

Right click your display, of course! People never understand what I mean, only what I say.
Okey, forget the monitor thing for a while and concentrate on the display and on your video/display VGA card. That is what I wanted you to change. That is what I hoped I had directed you too.
'Standard VGA' you could say is BIOS/Windows driven, but by changing this to the VGA card you actually have, you will be able to have a much better display (shown on your monitor).
What VGA card do you think you have, if any? This is a list of newer VGA cards. It is in Swedish, and that is why it is so useful to everyone:
http://www.komplett.se/k/kl.asp?bn=10413

Powders dosing machine? Direct control of motors?

Hi Everyone,
I hope this was not posted below but I begin my worki with nxt and labviev and have some problem.
I want to build a powder doser which consists of two powder feeders (driven by motors) and laboratory weight controlled by RS232.
The aim is to be able to make precise mixtures in a way that weigh weights empty box, make tare, then one feeder adds some powder (A) weight checks how much was given- if not enough adds some more etc..etc.. then proceeds with powder 2 and make mixture ..
The problem is that I know that I can write NXT program on labview to run NXT brick, but this would be quite complicated to use - the best way would be to take direct control over motor via NXT- so when I want motor to move few degrees it doesnt have to start program in nxt brick, just do it from LAbview program level... IS it possible ? Can I use NXT brick as a motor controller itself?
Thanks
Marek
Solved!
Go to Solution.

Marek,
This is possible both in the NXT Module 2009 and earlier NXT toolkits. In 2009 you simply need to write your NXT code in a VI that is not target to the NXT (e.g. it is targeted to My Computer/Main Application Instance). The NXT VI's know when they are targeted to the computer and automatically send Direct Commands to the NXT brick via USB or Bluetooth.
In earlier versions of the NXT toolkit you will have to use the NXT Direct VIs to accomplish the same task, which isn't as seamless as the new method but works just the same. Please let us know if you have questions as to how to implement this.
Cheers,
Mark
LabVIEW R&D

HT4623 I have followed the directions and my iphone is not installing the iOS 7.0.2. My iphone is plugged into my lap top that has the most recent version of itunes. It is a dsl connection. Is that my problem?

I have followed the directions and my iphone is not installing the iOS 7.0.2. I have the most recent version of itunes on my laptop commuter. my iphone is attached to my laptop via usb port. The laptop uses dsl not wifi. Is that my problem?

Exactly what version of iTunes are you running? And DON'T say 'the latest version'... CHECK the version number. You need to be running 11.1 or higher.

I cannot get a TV show from Itunes to play on my Ipad. I originally downloaded in HD but have since deleted and re-downloaded SD. I have also downloaded directly to PC and transferred back to IPad without success. It does work on PC

I recently purchased season 7 of entourage from Itunes and downloaded directly to IPad2. When I selected to play the tv shows the screen would go black and become disabled. I have to hit the home page to exit and then search for another movie in my ipad to get access to the library again. I have tried downloading directly to PC and then transferring to IPad without success. I don't think it is the download itself because I can play the tv shows on the pc and my iphone. Am I missing a setting? also, I can watch other tv shows or movies so my video app is not completely fouled up.

Sometimes simply restarting your iTunes, the computer and the iPad is all that it takes to correct an issue like this so try that. Quit iTunes, reboot your computer, and restart the iPad. Then try the sync again.
Restart the iPad by holding down on the sleep button until the red slider appears and then slide to shut off. To power up hold the sleep button until the Apple logo appears and let go of the button.

Do I have individual bit direction control in strobed I/O mode for DAQ 653x device?

Similar Messages

Maybe you are looking for