Do I need a spyware scanner?

the question is do I need a spyware scanner, I do have antivirus software installed but is this enough?

Norton Antivirus has a very long and illustrious reputation for mangling Mac OS X systems, sometimes to the point where a complete reinstall is necessary. Among other things, it installs kernel extensions which are known to cause kernel panics and system freezes; it contains known and documented bugs which can silently corrupt Adobe Photoshop and Adobe InDesign files, destroy a user's ability to authenticate as an administrator, and (on PPC systems) can cause Classic to stop functioning; and Symantec has on at least two occasions now released flawed .dat file updates which erroneously report certain critical Mac OS X files as "viruses." (Deleting these "viruses" causes damage to the system that in some cases renders it unbootable.)
(This was a quote from another forum)
No viruses that can attack OS X have so far been detected 'in the wild', i.e. in anything other than laboratory conditions.
It is possible, however, to pass on a Windows virus to another Windows user, for example through an email attachment. To prevent this all you need is the free anti-virus utility ClamXav, which you can download from:
http://www.clamxav.com/
However, the appearance of Trojans and other malware that can possibly infect a Mac seems to be growing, but is a completely different issue to viruses.
If you allow a Trojan to be installed, the user's DNS records can be modified, redirecting incoming internet traffic through the attacker's servers, where it can be hijacked and injected with malicious websites and pornographic advertisements. The trojan also installs a watchdog process that ensures the victim's (that's you!) DNS records stay modified on a minute-by-minute basis.
You can read more about how, for example, the OSX/DNSChanger Trojan works here:
http://www.f-secure.com/v-descs/trojanosxdnschanger.shtml
SecureMac has introduced a free Trojan Detection Tool for Mac OS X. It's available here:
http://macscan.securemac.com/
The DNSChanger Removal Tool detects and removes spyware targeting Mac OS X and allows users to check to see if the trojan has been installed on their computer; if it has, the software helps to identify and remove the offending file. After a system reboot, the users' DNS records will be repaired.
(Note that a 30 day trial version of MacScan can be downloaded free of charge from:
http://macscan.securemac.com/buy/
and this can perform a complete scan of your entire hard disk. After 30 days the cost is $29.99. The full version permits you to scan selected files and folders only, as well as the entire hard disk. It will detect (and delete if you ask it to) all 'tracker cookies' that switch you to web sites you did not want to go to.)
A white paper has recently been published on the subject of Trojans by SubRosaSoft, available here:
http://www.macforensicslab.com/ProductsAndServices/index.php?mainpage=document_general_info&cPath=11&productsid=174
Also, beware of MacSweeper:
MacSweeper is malware that misleads users by exaggerating reports about spyware, adware or viruses on their computer. It is the first known "rogue" application for the Mac OS X operating system. The software was discovered by F-Secure, a Finland based computer security software company on January 17, 2008
http://en.wikipedia.org/wiki/MacSweeper
On June 23, 2008 this news reached Mac users:
http://www.theregister.co.uk/2008/06/23/mac_trojan/
More information on Mac security can be found here:
http://macscan.securemac.com/
The MacScan application can be downloaded from here:
http://macscan.securemac.com/buy/
You can download a 30 day trail copy which enables you to do a full scan of your hard disk. After that it costs $29.95.
More on Trojans on the Mac here:
http://www.technewsworld.com/story/63574.html?welcome=1214487119
This was published on July 25, 2008:
Attack code that exploits flaws in the net's addressing system are starting to circulate online, say security experts.
The code could be a boon to phishing gangs who redirect web users to fake bank sites and steal login details.
In light of the news net firms are being urged to apply a fix for the loop-hole before attacks by hi-tech criminals become widespread.
Net security groups say there is anecdotal evidence that small scale attacks are already happening.
Further details here: http://news.bbc.co.uk/2/hi/technology/7525206.stm
A further development was the Koobface malware that can be picked up from Facebook (already a notorious site for malware, like many other 'social networking' sites), as reported here on December 9, 2008:
http://news.bbc.co.uk/newsbeat/hi/technology/newsid_7773000/7773340.stm
You can keep up to date, particularly about malware present in some downloadable pirated software, at the Securemac site:
http://www.securemac.com/
There may be other ways of guarding against Trojans, viruses and general malware affecting the Mac, and alternatives will probably appear in the future. In the meantime the advice is: be careful where you go on the web and what you download!
As to the current 'Conficker furore' affecting Intel-powered computers, MacWorld recently had this to say:
http://www.macworld.co.uk/news/index.cfm?email&NewsID=25613
Although any content that you download has the possibility of containing malicious software, practising a bit of care will generally keep you free from the consequences of anything like the DNSChanger trojan.
1. Avoid going to suspect and untrusted Web sites, especially *********** sites.
2. Check out what you are downloading. Mac OS X asks you for you administrator password to install applications for a reason! Only download media and applications from well-known and trusted Web sites. If you think you may have downloaded suspicious files, read the installer packages and make sure they are legit. If you cannot determine if the program you downloaded is infected, do a quick Internet search and see if any other users reported issues after installing a particular program.
3. Use an antivirus program like ClamXav. If you are in the habit of downloading a lot of media and other files, it may be well worth your while to run those files through an AV application.
4. Use Mac OS X's built-in Firewalls and other security features.
5. Stop using LimeWire. LimeWire (and other peer-to-peer sharing applications) are hotbeds of potential software issues waiting to happen to your Mac. Everything from changing permissions to downloading trojans and other malicious software can be acquired from using these applications.
6. Resist the temptation to download pirated software. After the release of iWork '09 earlier this year, a Trojan was discovered circulating in pirated copies of Apple's productivity suite of applications (as well as pirated copies of Adobe's Photoshop CS4). Security professionals now believe that the botnet (from iServices) has become active. Although the potential damage range is projected to be minimal, an estimated 20,000 copies of the Trojan have been downloaded. SecureMac offer a simple and free tool for the removal of the iBotNet Trojan available here:
http://macscan.securemac.com/files/iServicesTrojanRemovalTool.dmg

Similar Messages

  • Anti-spyware scanner

    Shortly after launching safari which included opening up sites from a previous session, a different window popped up identifying itself as an anti-spyware scanner referenced to gescansecurity.org. The window displayed, had an appearance almost identical to a standard "my computer" screen on a windows pc, but inside safari. It looked like the typical type of windows malware, with messages alerting of the many various viruses/Trojans ("downloader.win32.agent", etc.) detected on my computer, followed by a prompt to install "System Security Antivirus" and such by clicking "ok". With no option to close the window, and with no other active windows, I clicked cancel. I then get a message that windows security center recommends I install it, (can't close still so I click the only button, "ok." Cycle repeats ("cancel" then "ok") as I try to get through the seemingly endless cycle of message alerts popping up. I finally chose to quit safari. Researched issue on another computer. Relaunched safari on supposedly infected mac only to find it gone. What could have caused this problem, could I have inadvertently handled this issue incorrectly somewhere (as described above), and just in case, is there a quick and reliable way of making sure my mac really is/is not infected. I greatly appreciate anyone who can offer any help as I am completely new to experiencing this on the mac. Sorry if my description is too long, but hoping the details might better elaborate. Thanks again.

    If Cancel starts some kind of 'loop' like you got, I would simply close Safari and re-open it.
    The full story:
    No viruses that can attack OS X have so far been detected 'in the wild', i.e. in anything other than laboratory conditions.
    Do not be tricked by 'scareware' that attempts computer users to download fake anti-virus software that may itself be malware. More on that here:
    http://news.bbc.co.uk/1/hi/technology/8313678.stm
    Beware of PDF files from unknown sources. A security firm announced that by its counting, malicious Reader documents made up 80% of all exploits at the end of 2009.:
    http://www.computerworld.com/s/article/9157438/RoguePDFs_account_for_80_of_all_exploits_saysresearcher
    It is possible, however, to pass on a Windows virus to another Windows user, for example through an email attachment. To prevent this all you need is the free anti-virus utility ClamXav, which you can download for Tiger and Leopard from:
    http://www.clamxav.com/
    The new version for Snow Leopard is available here:
    http://www.clamxav.com/index.php?page=v2beta
    (Note: ClamAV adds a new user group to your Mac. That makes it a little more difficult to remove than some apps. You’ll find an uninstaller link in ClamXav’s FAQ page online.)
    However, the appearance of Trojans and other malware that can possibly infect a Mac seems to be growing, but is a completely different issue to viruses.
    If you allow a Trojan to be installed, the user's DNS records can be modified, redirecting incoming internet traffic through the attacker's servers, where it can be hijacked and injected with malicious websites and pornographic advertisements. The trojan also installs a watchdog process that ensures the victim's (that's you!) DNS records stay modified on a minute-by-minute basis.
    You can read more about how, for example, the OSX/DNSChanger Trojan works here:
    http://www.f-secure.com/v-descs/trojanosxdnschanger.shtml
    SecureMac has introduced a free Trojan Detection Tool for Mac OS X. It's available here:
    http://macscan.securemac.com/
    The DNSChanger Removal Tool detects and removes spyware targeting Mac OS X and allows users to check to see if the trojan has been installed on their computer; if it has, the software helps to identify and remove the offending file. After a system reboot, the users' DNS records will be repaired.
    (Note that a 30 day trial version of MacScan can be downloaded free of charge from:
    http://macscan.securemac.com/buy/
    and this can perform a complete scan of your entire hard disk. After 30 days free trial the cost is $29.99. The full version permits you to scan selected files and folders only, as well as the entire hard disk. It will detect (and delete if you ask it to) all 'tracker cookies' that switch you to web sites you did not want to go to.)
    A white paper has recently been published on the subject of Trojans by SubRosaSoft, available here:
    http://www.macforensicslab.com/ProductsAndServices/index.php?mainpage=document_general_info&cPath=11&productsid=174
    Also, beware of MacSweeper:
    MacSweeper is malware that misleads users by exaggerating reports about spyware, adware or viruses on their computer. It is the first known "rogue" application for the Mac OS X operating system. The software was discovered by F-Secure, a Finland based computer security software company on January 17, 2008
    http://en.wikipedia.org/wiki/MacSweeper
    On June 23, 2008 this news reached Mac users:
    http://www.theregister.co.uk/2008/06/23/mac_trojan/
    More on Trojans on the Mac here:
    http://www.technewsworld.com/story/63574.html?welcome=1214487119
    This was published on July 25, 2008:
    Attack code that exploits flaws in the net's addressing system are starting to circulate online, say security experts.
    The code could be a boon to phishing gangs who redirect web users to fake bank sites and steal login details.
    In light of the news net firms are being urged to apply a fix for the loop-hole before attacks by hi-tech criminals become widespread.
    Net security groups say there is anecdotal evidence that small scale attacks are already happening.
    Further details here: http://news.bbc.co.uk/2/hi/technology/7525206.stm
    A further development was the Koobface malware that can be picked up from Facebook (already a notorious site for malware, like many other 'social networking' sites like Twitter etc), as reported here on December 9, 2008:
    http://news.bbc.co.uk/newsbeat/hi/technology/newsid_7773000/7773340.stm
    You can keep up to date, particularly about malware present in some downloadable pirated software, at the Securemac site:
    http://www.securemac.com/
    There may be other ways of guarding against Trojans, viruses and general malware affecting the Mac, and alternatives will probably appear in the future. In the meantime the advice is: be careful where you go on the web and what you download!
    If you think you may have acquired a Trojan, and you know its name, you can also locate it via the Terminal:
    http://theappleblog.com/2009/04/24/mac-botnet-how-to-ensure-you-are-not-part-of- the-problem/
    As to the recent 'Conficker furore' affecting Intel-powered computers, MacWorld recently had this to say:
    http://www.macworld.co.uk/news/index.cfm?email&NewsID=25613
    Although any content that you download has the possibility of containing malicious software, practising a bit of care will generally keep you free from the consequences of anything like the DNSChanger trojan.
    1. Avoid going to suspect and untrusted Web sites, especially p'orn'ography sites.
    2. Check out what you are downloading. Mac OS X asks you for you administrator password to install applications for a reason! Only download media and applications from well-known and trusted Web sites. If you think you may have downloaded suspicious files, read the installer packages and make sure they are legit. If you cannot determine if the program you downloaded is infected, do a quick Internet search and see if any other users reported issues after installing a particular program.
    3. Use an antivirus program like ClamXav. If you are in the habit of downloading a lot of media and other files, it may be well worth your while to run those files through an AV application.
    4. Use Mac OS X's built-in Firewalls and other security features.
    5. Stop using LimeWire. LimeWire (and other peer-to-peer sharing applications) are hotbeds of potential software issues waiting to happen to your Mac. Everything from changing permissions to downloading trojans and other malicious software can be acquired from using these applications. Similar risks apply to using Facebook, Twitter, YouTube and similar sites which are prone to malicious hacking: http://news.bbc.co.uk/1/hi/technology/8420233.stm
    6. Resist the temptation to download pirated software. After the release of iWork '09 earlier this year, a Trojan was discovered circulating in pirated copies of Apple's productivity suite of applications (as well as pirated copies of Adobe's Photoshop CS4). Security professionals now believe that the botnet (from iServices) has become active. Although the potential damage range is projected to be minimal, an estimated 20,000 copies of the Trojan have been downloaded. SecureMac offer a simple and free tool for the removal of the iBotNet Trojan available here:
    http://macscan.securemac.com/files/iServicesTrojanRemovalTool.dmg
    Last but not least, there is the potential for having your entire email contact list stolen for use for spamming:
    http://www.nytimes.com/2009/06/20/technology/internet/20shortcuts.html?_r=1

  • Linux based windows spyware scanner

    Can anyone recommend a linux based windows spyware scanner?
    I'm running a couple of windows boxes in vmware and would like to mount the disks up under linux and scan them for viruses and spyware. I'm using clamav for virus scanning but I'd like something to pick up spyware as well.

    Hello,
    The sources files (.FMB, .MMB, .PLL) are cross platform (same major version). You just need to compile them on the target runtime platform to get the executables.
    Francois

  • I have an older Microtek scanner that is only supported thru 10.4. Is there anyway to install Tiger on my external HDD that will be bootable by my new iMac? If not. anybody need a reliable scanner (Tiger users only).

    I have an older Microtek scanner that is only supported thru 10.4. Is there anyway to install Tiger on my external HDDthat can boot up my new iMac? If not, anybody need a good scanner (Tiger users only please).

    Hi Bill,
    Not possible to run Tiger on a new Mac at all.
    The good news is that VueScan supports many Mikrotek scanners & is free to try...
    http://www.hamrick.com/vuescan/vuescan.htm#microtek
    http://www.hamrick.com/

  • Computer hacked; asking for update that I don't need. Spyware?

    I believe it might by Spyware. Despite the fact that I'm running latest version of Firefox, a new link opens that tells me I need to upgrade to latest version of Firefox, which I mistakenly did. Now I have pop-ups galore. And I constantly have new windows opening up. I can't get any work done, I must use Firefox for my work. For example, I have had, I estimate, 10 windows or links open up in the short time that I have typed this message. Very frustrating. I am using Windows 8.

    Sometimes a problem with Firefox may be a result of malware installed on your computer, that you may not be aware of.
    You can try these free programs to scan for malware, which work with your existing antivirus software:
    * [http://www.microsoft.com/security/scanner/default.aspx Microsoft Safety Scanner]
    * [http://www.malwarebytes.org/products/malwarebytes_free/ MalwareBytes' Anti-Malware]
    * [http://support.kaspersky.com/faq/?qid=208283363 TDSSKiller - AntiRootkit Utility]
    * [http://www.surfright.nl/en/hitmanpro/ Hitman Pro]
    * [http://www.eset.com/us/online-scanner/ ESET Online Scanner]
    [http://windows.microsoft.com/MSE Microsoft Security Essentials] is a good permanent antivirus for Windows 7/Vista/XP if you don't already have one.
    Further information can be found in the [[Troubleshoot Firefox issues caused by malware]] article.
    Did this fix your problems? Please report back to us!

  • Need help with scanner/printer

    I'm having trouble with my scanner. I only started having problems yesterday. When I came to this website it told me to use HP print scan dr. But I ran it, and it told me to go back to HP customer care. I've tried uninstalling it and reinstalling it. Nothing works. I don't know what I did to it. 

    Hey @bluepen ,
    Thank you for joining us on the HP Forums today, hope you enjoy your time with us!
    I understand you are having trouble with your scanner.
    So that I can better assist you I need to know a few things first;
    1. What Operating System are you using? Press the link to find out, in case you don't know already. http://whatsmyos.com/
    2. What printer are you using?
    3. How is the printer connected to the computer?
    Do you have the printer connected directly to a wall outlet or is it in a surge protector or power bar? Even if you have been using a surge protector/power bar all this time and you feel it is not the cause, please connect it to a wall outlet just so we can eliminate the power source as the root cause. Issues when Connected to an Uninterruptible Power Supply/Power Strip/Surge Protector
    In this document you will see, ISSUE: Problems or issues may arise when an HP LaserJet series printer is connected to an uninterruptible power supply (UPS), a power strip, or a surge protector
    ^ This is not limited to Laserjet printers.
    Look forward to hearing back from you.
    I worked for HP.

  • Need a new scanner

    My flatbed just bit the dust and I need a new one. I have a bunch of color 35mm mounted slides in carousels that I would also like to be able to scan, in addition to my normal scanning needs (book pages, faxing, etc.).
    I thought this might be an excellent place to get some recommendations. My current scanner is a Visioneer and several years old. It was great in its time but not that great at color today.
    I have an Oly 750uz and E-510 for my photo needs so the slides are definitely legacy. I normally process with Lightroom but also have CS3 for retouching.
    I have no favorite vendor but it seems that Epson gets a lot of traffic (casual observation while I've not been in the market).
    I would appreciate any advice on a quality scanner at <$150 (hope this is not an oxymoron!).
    Thanks.

    I hate to correct you John, but there is a forth choice. I do believe that you left out Epson!
    I recently purchased an Epson V500 and I'm very satisfied with it. Less features than the V700 but meets my needs at a considerably lower cost. Good results from 35mm negs and slides. I think it is normally $250.00 but got mine, on sale, for $200.00. Check Epson site.
    Q

  • Need 64bit Artec scanner driver

    I am running 64bit Arch and am trying to setup my ArtecE+48u scanner. But I am unable to get it working. I had this working on 32bit OSs earlier and I recently upgraded to 64bit OS.
    I have installed sane and xsane.
    bash-3.2# pacman -Q xsane
    xsane 0.996-1
    bash-3.2# pacman -Q sane
    sane 1.0.19-2
    sane-find-scanner is able to find the scanned but scanimage -L does not. I have double checked the physical connections too, that is not the issue.
    I suspect the issue is becase the /usr/share/sane/artec_eplus48u/Artec48.usb is 32bit ( found this file on my driver CD meant for windows). Has anyone overcome this issue? Do we have a 64bit driver for this devce?
    Any pointers will be appreciated.
    Thanks,
    Balu
    Last edited by balu (2008-12-15 16:57:56)

    I tried renaming the driver file to 1200.usb and reflected tha change in /etc/sane.d/artec_eplus48u.conf but no luck.
    I trield mutiple things after that and last thing I remember doing is re-installing sane and xsane. And also commenting the unwanted stuff in artec_eplus48u.conf. Now my scanner is detected and xsane works.
    Thanks for all the responses.
    Here's my artec_eplus48u.conf.
    # artec_eplus48u - SANE Backend configuration file
    # This section is for use with the Artec E+ 48U scanner
    # This scanner is also sold as
    # Tevion MD 9693, Medion MD 9705, Medion MD 9693, Medion MD4394
    # This sections contains verbose description of each option.
    # For other scanners, see below.
    # The USB section:
    # each device needs at least the following line:
    # usb vendor-ID and product-ID
    # Every device configuration in this file must begin with an usb entry.
    usb 0x05d8 0x4003
    # Path to the firmware file
    # This file comes with the Windows driver
    # The scanner won't work without it
    option artecFirmwareFile /usr/share/sane/artec_eplus48u/Artec48.usb
    #option artecFirmwareFile /usr/share/sane/artec_eplus48u/1200.usb
    # Is the scanner an Artec E Plus Pro (or compatible)? 0 = no, 1 = yes
    option ePlusPro   0
    # for adjusting the default gamma values
    option redGamma         1.0
    option greenGamma       1.0
    option blueGamma        1.0
    option masterGamma      1.9
    #Use this options to set the default offset and exposure time values.
    option redOffset        0x28
    option greenOffset      0x2f
    option blueOffset       0x2f
    option redExposure      0xa7
    option greenExposure    0x116
    option blueExposure     0xdc
    # The vendor and model string
    # This string is displayed by the frontends. If you do not want to get your
    # scanner reported as "Artec E+ 48U", then change the option accordingly.
    option vendorString "Artec"
    option modelString "E+ 48U"
    # device-name
    # If autodetection does not work, then you can specify the device here
    # The device entry must be the last one in this config file (or the last one before a
    # new usb entry).
    #If you are using libusb, a device looks like this:
    #device libusb:001:002
    #If you are using the scanner module (kernel driver), a device looks like this:
    #device /dev/usbscanner
    # Since the Trust Easy Webscan 19200 uses a different product id, we add
    # another usb section here.
    #usb 0x05d8 0x4006
    #option artecFirmwareFile /usr/share/sane/artec_eplus48u/Artec48.usb
    #option vendorString "Trust"
    #option modelString "Easy Webscan 19200"
    # Since the Memorex Mem48U uses a different product id, we add
    # another usb section here.
    #usb 0x05d8 0x4005
    #option artecFirmwareFile /usr/share/sane/artec_eplus48u/Artec48.usb
    #option vendorString "Memorex"
    #option modelString "MEM 48U"
    # Since the Trust 240H Easy Webscan Gold uses a different product id, we add
    # another usb section here.
    #usb 0x05d8 0x4007
    #option artecFirmwareFile /usr/share/sane/artec_eplus48u/Artec48.usb
    #option ePlusPro         1
    #option vendorString "Trust"
    #option modelString "240H Easy Webscan Gold"
    # Since the UMAX AstraSlim SE uses a different product id, we add
    # another usb section here.
    #usb 0x05d8 0x4009
    #option artecFirmwareFile /usr/share/sane/artec_eplus48u/Artec48.usb
    #option vendorString "UMAX"
    #option modelString "AstraSlim SE"
    # This section is for the Artec E+ Pro
    # Note, that the name of the firmware file is called 1200.usb for
    # this device
    #usb 0x05d8 0x4004
    #option artecFirmwareFile /usr/share/sane/artec_eplus48u/1200.usb
    #option ePlusPro   1
    #option vendorString "Artec"
    #option modelString "E+ Pro"
    # This section is for the UMAX AstraSlim 1200 SE
    # Note, that the name of the firmware file is called 1200.usb for
    # this device
    #usb 0x05d8 0x4010
    #option artecFirmwareFile /usr/share/sane/artec_eplus48u/1200.usb
    #option vendorString "UMAX"
    #option modelString "AstraSlim 1200 SE"
    # Since the Yakumo Scan50 uses a different product id, we add
    # another usb section here.
    #usb 0x05d8 0x4011
    #option artecFirmwareFile /usr/share/sane/artec_eplus48u/Artec48.usb
    #option vendorString "Yakumo"
    #option modelString "Scan50"
    Last edited by balu (2008-12-16 14:47:30)

  • Does mac need anti spyware

    i have anti-virus,super anti-spyware and ad aware on my pc,do i need to install these

    No. The best anti-anything you can use on a Mac is common sense.

  • Need film/slide scanner for PM 7600

    I want a film/slide scanner to digitally capture the images from my zillions of slides and negatives. Cost, as usual, is a problem. I was thinking that rather than buying a low end 1800 DPI piece of crap to team with the G5, maybe I could get a good one (used/reconditioned) with SCSI and team it with one of my PM 7600s. Can anyone suggest a source for this, besides eBay?
    TIA
    Kathi

    Thanks everybody!
    Jeff--yes, lucky me, I got my Christmas wish of a PowerMac G5. Just as the PPC chip was breathing its last, with the dual-core rendition (2.0 GHz). Turned out that my particular chip was bad, and it took more than a month of struggling with all kinds of crazy behavior to drill down to that. I was sure glad I had my 7600s during that time. And I still enjoy the original one, though its twin isn't getting much use now. I swapped the processors so that the one with the extra RAM and added storage now also has the faster (233 mHz) processor. I scored an old 17" AppleVision CRT from the office to run with the G5 so the 7600 could have its MultiSync 70 back, and I also got a very nice 15" or so Sony display from work that runs with the twin. Which means that at long last I put my two 13" Apple RGB displays out with the trash a few weeks ago. And I upgraded both 7600s to OS 9.1, which is as far as they'll go, I guess, without processor upgrades. That was really my main reason for wanting the G5--the OS X functionality, more than pure performance issues. There are too many things that don't work in Classic nowadays. Of course the G5 is much faster, but not so much faster that I want to scream every time I use the 7600. The three machines are happily networked via router.
    I always forget about all the stuff that offices dump even though I've been a more-than-occasional beneficiary of the process. Thanks for reminding me. I'll have to ask our IT guy if he knows of any outlets around here. Scouring thrift shops is too big a mission for my overworked/lazy self at this point
    Grant--thanks for the specs. I haven't looked at the current UMAX flatbed products because I already have a UMAX 1220S. I figured a slide attachment for it might turn up on eBay one day but I don't have the patience for that. It doesn't look as though any of their current slide/film holders would work with the 1220S, and even if they did still have something for my model, the resolution would be kind of low for 35mm anyway.
    Jim--thanks for the warning!! I'm sorry you had such a hassle with that Nikon scanner.
    Tom, your Polaroid scanner sounds great. I can't find any current Polaroid film scanners on their Web site, they only list Nikon and Microtek (all quite pricey). Maybe I can find a used one like yours. Or maybe I really don't need more than 1800 DPI and I should just buy the UMAX PowerLook 180... Probably will never do much printing with my old images, more likely just digital display, but I'm not positive about that, and I'd like to be able to throw out all those slides without sweating when the conversions are done.

  • Do i need a virus scanner for Mac?

    I hear lots of "no's" and a few "yes'"  Is this OS still safe or do I need to scan for malware?  Any suggestions/thoughts?

    You do not currently need one. There are no active viruses affecting OS X.
    Helpful Links Regarding Virus Protection
    An excellent link to read is Tom Reed's Mac Malware Guide.
    Also, visit The XLab FAQs and read Detecting and avoiding malware and spyware.
    If you require anti-virus protection I recommend using ClamXav.

  • Urgent: need help with Scanner

    Im sorry im kinda new, and i cant figure out how to scan a String including new lines, and stops scanning after reaching an empty line...
    i think im supposed to use System.getParameter("line.seperator")
    Thx a lot in advance, but ive really been stuck

    Hi,
    Did you try the java.util.Scanner class? Maybe you can use the hasNextLine() method in an outer loop and write an inner loop that tokenizes each line like this:
    Scanner s1= new Scanner(inputString);
    while(s1.hasNextLine()){
    Scanner s2 = new Scanner(s1.nextLine());
    if(!s2.hasNext())
    break;
    There is this forum http://forum.java.sun.com/forum.jspa?forumID=54
    for people who are new to Java, try posting your question there.

  • Need help adding scanner to my computer

    I am having trouble getting my scanner to load onto my laptop.  I have an HP LaserJet 6500 all in one printer.  The printer is recognized but not the scanner.  We recently moved and the scanner worked fine before that.  Any ideas?
    Thanks.

    I am having trouble getting my scanner to load onto my laptop.  I have an HP LaserJet 6500 all in one printer.  The printer is recognized but not the scanner.  We recently moved and the scanner worked fine before that.  Any ideas?
    Thanks.

  • Need scanner recommendations

    I need a new scanner, and I am mostly concerned with scanning photos into Photoshop. I am hoping to find a scanner that works quickly. I have an IBM laptop with Vista. Any suggestions?

    I'm sure pretty much any Epson or Canon Scanner around or above the 120 Euros price mark will be fine. Those more expensive scanners have 3 or 4 sensor lines, which speeds things up considerably as opposed to just one on the cheap 60 Euro scanners. The rest depends on your system. Just as much as the actual scanning, your USB bus and hardrive may limit the effective speed.
    Mylenium

  • *SCANNING SLIDES- PLEASE RECOMMEND SCANNER/EQUIPMENT NEEDED

    Hello,
    I used to have the HP Scanjet 4470c which came with a slide/photo-negative adapter. First question, is this compatable with my Mac OS X Version 10.4.8?
    When I got the Mac, I purchased the Canon Pixma MP500. This doesn't seem to have the option to scan my old slides.
    If you would, kindly let me know what I need to do to properly scan my slides to import to IPhoto- can I update anything, use a third party, or do I need to purchase a third scanner?
    Thanks so much in advance for your assistance.
    Take care,
    Michael

    Sieb:
    Welcome to the Apple Discussions. According to HP's web site the 4470c is not compatible with OS X.
    So it looks like you'll need a new scanner as the multifunction Canon doesn't fit the bill. I just bought a Canon 8600F and it has slide capability. Canon has 2 models with that capability ( also the 4400F model). Both will do 4 slides at a time. If doing more than 4 at a time then look into other scanner brands.
    With the scanner I just purchased I got Photoshop Elements 4 bundled with it. That's a good add-on.
    Do you Twango?
    TIP: For insurance against the iPhoto database corruption that many users have experienced I recommend making a backup copy of the Library6.iPhoto database file and keep it current. If problems crop up where iPhoto suddenly can't see any photos or thinks there are no photos in the library, replacing the working Library6.iPhoto file with the backup will often get the library back. By keeping it current I mean backup after each import and/or any serious editing or work on books, slideshows, calendars, cards, etc. That insures that if a problem pops up and you do need to replace the database file, you'll retain all those efforts. It doesn't take long to make the backup and it's good insurance.
    I've written an Automator workflow application (requires Tiger), iPhoto dB File Backup, that will copy the selected Library6.iPhoto file from your iPhoto Library folder to the Pictures folder, replacing any previous version of it. You can download it at Toad's Cellar. Be sure to read the Read Me pdf file.

Maybe you are looking for