Do updates take up memory?

I was updating several of my apps. I was wondering if the apps took up more memory on the IPod, or the memory usage for that app remains the same.

They may take a different amount of memory. Usually updating adds size. There are some cases the code is optimized and requires less, but s very unlikely. The ios update itself requires space to run but should change size of ios significantly.

Similar Messages

MS-6528LE Can only take one memory module at a time

The paticular board I am posting about can only take one memory chip at a time i.e. I install one memory chip it's 133MHZ chip 128MB boot up my machine goes to windows just fine.
I am using windows xp btw.
Ok when I install a 2nd 128MB PC 133 chip I get the blue screen right before I get into windows and it gives some really weird error.
I take the second chip out leave one chip in and it works just fine I am at a loss of this one.
I tried updating the bios didn't work could use some assistance here by email or a nice reply.

Thats the problem. My powersupply maxes out at 300W and goes no higher than that. It seems it needs more power.
I will get a powersupply that is more suitable for this motherboard and post again with the results I get. Thanks for your help I can say that this company has been more helpful than others.
Once again thanks.

How do I create my own favorite template for DVD slideshows? I used to be able to select this from pulldown menu, but cannot now do so. I am directed straight to templates, which take more memory. I have a large slideshow, and need all the space I can get

First, how do I create my own favorite theme template for DVD slideshows? I used to be able to select this from pulldown menu, but cannot now do so. I am directed straight to already existing themes, which take more memory. I have a large slideshow, and need all the space I can get. I just want to use a picture as my DVD cover, and then insert a slideshow. Also, when I try to burn my 8.5gb double sided slideshow, all that burns is the music. It is a large slideshow, a memorial on the life of my now deceased brother. This means a lot to me and to my family, and I am having so much trouble trying to burn it. I have gone into Project View and selected appropriately. The bar shows I have room to burn this DVD, but it does not burn. I have burned so many DVDs in the past, but this one just will not burn. I am so confused at this point. I will say this is the first 8.5gb I have attempted to create and burn. My specs list a 7.7gb or 4.7gb as operable....but there are no 7.7gb dvds. I had to purchase 8.5gb. Help? What am I doing wrong? I have spent so much time on this, and just cannot figure it out.

Final Cut is a separate, higher end video editor. The pro version of iMovie.
Give iPhoto a look at for creating the slideshow. It's easy to assemble the photos in an album in iPhoto, put them in the order you want and then make a slideshow of them. You can select from various themes and transitions between slides and add music from your iTunes library.
When you have the slidshow as you want use the Export button at the bottom of the iPhoto window and export with Size = Medium or Large.
Save the resulting Quicktime movie file in your Movies folder.
Next, open iDVD, choose your theme and drag the QT movie file into the menu window being careful to avoid any drop zones.
Then follow this workflow to help assure the best qualty video DVD:
Once you have the project as you want it save it as a disk image via the File ➙ Save as Disk Image menu option. This will separate the encoding process from the burn process.
To check the encoding mount the disk image, launch DVD Player and play it. If it plays OK with DVD Player the encoding is good.
Then burn to disk with Disk Utility or Toast at the slowest speed available (2x-4x) to assure the best burn quality. Always use top quality media: Verbatim, Maxell or Taiyo Yuden DVD-R are the most recommended in these forums.
The reason I suggest iPhoto is that I find it much easier to use than iMovie (except for the older iMovie 6 HD version). Personal preferences showing here.

Which of the following will take more memory?

Hi All,
which of the following will take more memory:
---this-----
long longval[] = new long[100];
String strval[100] = new String[100];
boolean boolval[100] = new boolean[100];
---or this-----
class Data {
long longval;
String strval;
boolean boolval;
Data data = new Data[100];
I heard objects will take up more memory than default datatypes. I'm looking for speed and memory optimization, so even the slightest of memory saving will matter.

Hi,
the first one needs less memory, I guess - beside the point, that the second one has 100 additional references, is the fact, that allocation of memory on modern machines is not a continous one - new data blocks are arranged so, that they start on even addresses (it's a performance issue) often clustered in multiples of 16, 32 or 64. So if you allocate a lot of single objects, the average loss of memory with each object is 8,16 or 32 Bytes (half the cluster size).
The first one allocates 3 compact data blocks (arrays) - so 3 times the additional loss of memory takes place. The second one allocates 101 blocks (100 objects + 1 array), and so 101 times the additional loss of memory takes place.
greetings Marsian

Can my macbook 5.2 take ddr3 memory?

Can my macbook 5.2 early 2009 take ddr3 memory? I have upgraded it to 4gb ddr2, but could I upgrade it further to ddr3 8gb? I have read somewhere you can but just to be sure.

Coxy230 wrote:
Can my macbook 5.2 early 2009 take ddr3 memory? I have upgraded it to 4gb ddr2, but could I upgrade it further to ddr3 8gb? I have read somewhere you can but just to be sure.
This is the RAM information for your MacBook
Built-in Memory
None
Maximum Memory
6.0 GB (Actual) 4.0 GB (Apple)
Memory Slots
2 - 200-pin PC2-5300 (667MHz) DDR2 SO-DIMM
Minimum Speed
Interleaving Support
Yes
So basically you can only use DDR2 which you have in it, but it is upgradable to 6GB instead of just the 4 that you have in it

How to count the number of Rows to be Updated before Update takes place..

Hi all,
I have a requirement, where i have to count the number of rows to be updated before updating it. SQL%ROWCOUNT gives the no. of rows updated ( after update takes place). How do i get to know the count of no. of rows to be updated/inserted/ deleted. I was looking for a simple solution, as above SQL%Rowcount. But i couldn't find any. I can use a Function and Return the value which will give me number of rows to be updated, But is there any Simple Logic other than this.. or any count function. Your Help is Appreciated. Thanks!

If you really want to do this (I have no clue why you would need it), then you can piggy back on any existing pessimistic locking you may already have in place.
However, it would require two loops through the records of which you want to know the count before you update, and a second pass to update them.
I would really re-think the need for this, though.
SQL> create table t0304(c number);
Table created.
SQL> insert into t0304 select rownum from all_objects where rownum <= 10;
10 rows created.
SQL> commit;
Commit complete.
SQL> select * from t0304;
         C
         1
         2
         3
         4
         5
         6
         7
         8
         9
        10
10 rows selected.
SQL> declare
2    cursor mycursor is select * from t0304 where mod(c,2) = 0 for update;
3    i number := 0;
4 begin
5    for r in mycursor loop
6      i := i + 1;
7    end loop;
8    dbms_output.put_line(i);
9    for r in mycursor loop
10      update t0304 set c = c + 20 where current of mycursor;
11    end loop;
12 end;
13 /
5
PL/SQL procedure successfully completed.
SQL> commit;
Commit complete.
SQL> select * from t0304;
         C
         1
        22
         3
        24
         5
        26
         7
        28
         9
        30
10 rows selected.
SQL>Edited by: Steve Howard on Mar 4, 2011 5:57 PM

1g tc: How much time does a firmware update take?

Concerning firmware update on a 1st Generation Time Capsule.
This Time Capsule is in use solely as a backup device for iMac
(1) Is 6+ hours for a firmware update usual?
At 8am this morning, "Airport Utility found a Time Capsule 802.11n (1st Generation) that is reporting problems."
Clicked: continue
alert: "This Time Capsule should be updated to a newer firmware version.
Current Version: 7:4:2
New Version: 7.6.4
progresion bar (continues to sprial)
Searching for latest firmware version... "
(2) (now 2:00 pm and ... has the application crashed?
checked "Force Quit" Airport Utility doesn't say "not responding" although the icon seems to be dimmer than others.
(3) Since Airport Utilities show a "Searching for...." message, can I quit the update process at this point without damage?

The update takes 2-3min max..
Unfortunately if it is dead well it is long dead.. if you stop the update now and reboot the device and see if it still works.. it sounds to me like it didn't start.
If it is dead well it is long overdue to be dead. Most of them died before 2years ran out.

Does initialization of a variable to 'null' take up memory?

Hi,
Does initialization of a variable to 'null' take up memory?
For ex:
String str = null;
Then, will the str take up memory?
Thanks & Regards,
Jags.

I suppose that you are referring to local variables, not instance variables.
String str;It takes only a slot (4 bytes) in stack. If the variable is unused, some compilers will not reserve the 4 bytes. For speed and alignment reasons it is not forbidden to occupy 8 bytes in the stack for the slot. (For instance, 64-bit processors, and some 32-bit processors, usually require that these variables start in memory addresses that are multiples of 8).
String str = null;It takes a slot (4 bytes) in stack, and some opcodes in program memory.
If the variable is not used after, the compiler is free to remove the assignment and not reserving the 4 bytes.
Memory calculations are more difficult than you can think, because JIT compilers are free to use a lot of memory in special structures and restructure your data. So a seemingly innocent String str = null may not occupy memory, or use a lot of it.

How long will a ios5.1 update take?

HOW LONG WILL A IOS 5.1 UPDATE TAKE ON AN IPAD2?? i AM URGED TO KNOW!!!

Including the download? Depends on your connection speed. The actual installation only takes a few minutes, but downloading it could take a while. I'd allow a couple of hours to be safe.

HT1600 How long does the update take to install?

How long does the latest Apple TV software update take to install?

I started the Apple TV software update at 8:00pm, hoping to watch a movie that night. After two hours, the update was still not complete - the status bar was stuck in the middle - so I left the update running and went to bed. The next morning, the update was finally complete, so it must have taken several hours. I have since installed an AirPort Extreme router - perhaps the next Apple TV software update will go faster! Updates on my iPhone, iPad, MacBook Pro are complete within minutes and I expected the same with Apple TV. All in all, I really enjoy the Apple products and technology.

Why does the iTunes 10.4.1 update take me to Apple's download webpage instead of the usual Safari/Quicktime dialog box?

Why does the iTunes 10.4.1 update take me to to Apple's download webpage (to download a full version of iTunes) instead of the usual Safari/Quicktime pop-up/dialog box where I usually perform the updates?

iTunes 10.4 and Safari 5.1 contain more than 'just' the OSX Lion-release but stability and security improvements as well.
For example, here is http://support.apple.com/kb/DL1070 what the Safari 5.1 contains.
In here http://www.apple.com/macosx/uptodate/ I can't find an "end-date" for the download of the Lion installer.
Nonetheless, personaly I would download the Lion installer and then copy it (from your Apllications folder) to a secure place (backup harddisk, external hardisk etc.).
When your IT gives it a go you can then use te Lion installer from inside the Applications folder, but I would also say to make a bootable clone of your current OSX Snow Leopard before starting the Lion installation.
Stefan

Since the itunes 10.4.1 update I have memory leaks problems.

Since the itunes 10.4.1 update I have memory leaks problems, Itunes used memory start at about 100 megs as usual but when it play the ram usage climb about 4 kb per second ( one time I had itunes using 690 megs !). I had to periodically close and restart Itunes to clear the memory.
Someone has suggestion to resolve this problem?

Same issue, Running Windows 7 x64 with 6 Gigs of RAM and have iTunes 10.4.1 32bit version.
I wanted to break in some headphones over the weekend, so left it playing a loop of songs. Came back on Monday to see my machine using a huge amount of RAM and iTunes just froze.
Here is a shot of my Task Manager showing iTunes was using 1.5gigs of Memory.

IMac will not start following OS X 10.9.4 update - takes 30 minutes to load and then turns off

iMac will not start following OS X 10.9.4 update - takes 30 minutes to load with spinning wheel and progress bar and then when it appears to be finished it powers off?

Thanks for the suggestion - this was the 1st thing I tried but it does not appear to work either. I'm still getting the 30 minute spinning wheel and slow moving progress bar on a grey background - even if I try to start the iMac in 'safe' mode!

I have a new hp tower running windows 8.1 and have been trying to install the adobe reader. The installer downloads (1meg) and I choose to run it but it just sits with an empty screen. I've checked task manager and it takes up memory but does nothing.

I have a new hp tower running windows 8.1 and have been trying to install the adobe reader. The installer downloads (1meg) and I choose to run it but it just sits with an empty screen. I've checked task manager and it takes up memory but does nothing. After letting it run for 3-4 minutes I kill the task. What can I do to get the reader installed on this machine? I've tried using chrome, firefox and explorer and get the same results with each.

Try the offline installer from http://get.adobe.com/reader/enterprise/

HT201442 My iPhone 4s hasnt been used in over 6 months. Everytime I plug it into my computer and iTunes, it says it requires a restore and update. It then comes up with an error after completing the download for the restore and update (takes around 10 min

My iPhone 4s hasnt been used in over 6 months. Everytime I plug it into my computer and iTunes, it says it requires a restore and update. It then comes up with an error after completing the download for the restore and update (takes around 10 minutes).Someone help me as I'm using the original iPhone 3 at the moment and it won't even take an ios 7 update!

Just to confirm on the screen of the iPhone do you see the itunes symbol with a cable pointing up to it?. If you do then your iPhone is inrecovery mode and would require you to restore it.
Now first you want to make sure iTunes is up to date and the cable you are using is not damaged. You also want to make sure iTunes is up to date.
Now if you get an error message then follow the article below to find out what causes the issue:
http://support.apple.com/kb/TS3694
In terms of the iPhone 3G that is definitely not able to update to iOS 7. Only the iPhone 4 and larter can update to iOS 7.

Do updates take up memory?

Similar Messages

Maybe you are looking for