Do we hav to create a separate repository for Designer Repository??

Hi
I have created a repository using a Repository Assistant. Do we have to create a separate repository for Designer Repository??? If so, how do we create a Designer Repository??
Message was edited by:
user536189

Hi,
The basic installation of OWB paris makes a repository owner and a repository user for you.
This owner serves as the design repository owner as well as the runtime repository owner.
For creating your mappings and deploying and executing them you just need to associate a target schema with the repository owner which you can do from the repository assistant from within the design center.
I hope you are talking about OWB paris and I have been able to guess your question correctly.
Regards
-AP

Similar Messages

How can I sum up raws? the sum function seems to work for columns only and right now I have to create a separate formula for each raw

How can I sum up raws? the Sum function seems to work only on columns. Right now I have to create a separate formula for each raw

Hi dah,
"Thanks, but can I do one formula for all present and future raws? as raws are being added, I have to do the sum function again and again"
You do need a separate formula for each group of values to be summed.
If the values are in columns, you need a copy of the formula for each column.
If the values are in rows, you need a copy of the formula for for each row.
If you set up your formulas as SGIII did in his example (shown below), where every non-header row has the same formula, Numbers will automtically add the formula to new rows as you add them.
"Same formula" in this context means exactly the same as all the formulas above, with one exception: the row reference in each formula is incremented (by Numbers) to match the row containing the formula.
Here the formula looks like this in the three rows shown.
B2: =SUM(2)
B3: =SUM(3)
B4: =SUM(4)
That pattern will continue as rows are added to the table.
Also, because the row token (2) references all of the non-header cells in row 2, the formula will automatically include new columns as they are added to the table.
Regards,
Barry

I have an email address that was used on one Appleid account and I have now created a separate Appleid for another device. Is it possible to transfer that icloud email address to the new Appleid account?

I had multiple iPhones and iPads associated with the same apple account and I have now created a separate account for two of them. The question that I have is whether there is a way to transfer the icloud email address to the new account?

Welcome to the Apple community 1960gmd.
Once an iCloud address is used for an Apple ID, you can't use it for any other.
Why would you want to use another Apple ID if you already have the address you want to use in another.
If you want your email on all devices but use a different ID for iCloud add it as a secondary account at settings > mail, contacts, calendars and just enable mail.

Do I really have to create two separate Apps for Ipad1/2 and iPad3?

Hi there DPS-Team
I want to create an iPad-Magazine using the DPS. I read all the stuff about the alternate layouts and watched the videos on the channels. Now I ran into what I might call a problem for that I couln't find a solution yet. With my creative cloud membership I can create unlimited app using DPS...but I simply cannot create one app that supports iPad 1&2 + iPad 3 display resolution???
Here in that article that I ran into where you suggest NOT to create an only iPad3 version: http://blogs.adobe.com/indesigndocs/2012/03/guidelines-for-creating-folios-for-ipad-3.html
- So if I want one issue of a magazine to be iPad3 compatible then I have to create another app?
- Or how this works? I have no expierience in how that looks in the App Store. But does Apple show both versions of the same App in the Store?
- Does the user see both versions of my App in the App Store or only one depending on the version of the iPad he posseses?
- Do I would have to create a diffrent icon for the SD as well as the HD-app so reader could choose in the App Store?
Example: All my apps on my iPad2 of course have 1024x768 but when I recently syncronized the iPad3 with iTunes then I automatically get the update-Info over the App Store icon that I can update the new version of the App optimized for the Retina-Display.
I mean that is a simple feature that nearly all apps are offering. Of course if I would not use the DPS I would have to again hire a developer and pay him for updating my already published app...but at least he could resubmit it supporting both resoutions.
I hope you are getting my point here. That is an important feature that should be build in no matter if I am a Single Edition customer or Business or Enterprise one. If you would do a catalog or something else for your client, he sees that all his apps on his iPad are updating according to his new device. But the catalog app that I did for him not. He would ask why can't you build it that way for me? I would have to explain him: Sorry I cannot create both version in one app, you and your clients have to download two versions of your app if you want to have it look nice. That is not a very good selling argument for me.
I really have to say that if there is no workaround, I am a bit disapointed because it does not make sense to create two seperate apps of the same app. I really would be happy to receive some helpfull advise on how to get both resolutions supported and when that is going to happen or even better...I misinterpreted the whole thing.
And please: NO I don't want to upgrade to business or enterprise edition!
Thank you for your words of advise, opinions and help.
Regards
Sushil

Dear Bob,
I will try that out. But do you see any chance in the near future that when you create an article out of InDesign, that you can then add multiple layouts with different resolutions? Then I wouldhave one article that contains iPad SD&HD as well as V&H.
So that would be a time saver. Create only one folio that already have the different resolutions covered. I only would have to work with one article inside folio-file for all the devices. Just a thought.
Thank you for your quick response.

I currently have one iTunes account for my personal iPod Touch and for my work iPhone and iPad. Can I create a separate account for work and keep my current account for my personal use - on the same computers?

I have an iTunes account for my personal iPod Touch - have had for several years. When my work provided me with an iPhone and now and iPad 2, they all fall under my personal iTunes account. Is it possible for me to create a separate account for my work devices and apps, while leaving my personal account intact? I use both my compter at home and at work to sync occasionally.

A much simpler solution would be to go into Settings > Store and turn off Automatic Downloads

Hi, can anyone tell me if I can have more than one iTunes account on the same PC. I've just bought my wife an iPad2 and want to create a separate account for her. Can I do that on the same PC as mine?

Hi, can anyone tell me if I can have more than one iTunes account on the same PC. I've just bought my wife an iPad2 and want to create a separate account for her. Can I do that on the same PC as mine? Thanks.

I would advise that you not set up a second Apple ID. It's really not necessary - having two Apple IDs won't affect how iTunes works with your iPads - and will just complicate matters. Each iPad will be treated independently and can be set to sync only the items you want on that particular iPad. If you really want to keep the two iPads separate, set up different iTunes libraries and have only those items you want on the related iPad in that library, rather than a different Apple ID. If you plan not to use a computer and just download directly to the iPads, you can again choose what apps and content each iPad gets.
But answering your specific question, you can have content from up to five iTunes Store accounts on any one computer or iPad. To create a new iTunes Store account, you'll need a different email address, and from there you just create the account the same way you did the first one.
Regards.

I have 2 iphones4! Do I have to create one apple id for each device or I can have both in one apple id? I'm asking cause I'm trying to run findmyiphone app for both devices!

I have 2 iphones4! Do I have to create one apple id for each device or I can have both in one apple id? I'm asking cause I'm trying to run findmyiphone app for both devices!

Here's what I do. My wife and I each have an iPhone. We each have our own Apple ID. I also have another totally separate Apple ID. The ONLY thing that one has been used for was to set up Find my iPhone for our phones and my iPad. There is no reason the MobileMe setting for find my iphone can't be something completely different from your regular Apple ID UNLESS you already use MobileMe, in which case the 2 conflict in ways I don't understand as I don't subscribe to it.

Why Dev Guide says "create a separate project for each ADF task flow ..."

Hi,
We have a BPM process application which is having a few human tasks. The form for each of the human tasks is similar. We’d like to be able to share some page fragments or code between them and create single web application to handle all the human tasks for this BPM process application. Then I found the following in the Oracle document “Developer’s Guide for Oracle SOA Suite 11g Release 1 (11.1.1.4.0)”:
“If the SOA composite contains multiple human tasks, create a separate project for each ADF task flow associated with each human task.”
I wonder if we have to do that and if so, what is the reason.
Do you have any clue? Please help.
Thanks a lot,
Helen

Hi Helen
1. I do not know the reason why they mentioned like separate project for each human task. NO, this is not required and we can have just one UI Project like MyTaskForms and have all the JSPs in this same project for each Human Task.
2. On our side, we have like 10 Human Tasks, all using the same Payload. So we have 10 .task file. For the very first .task file, we used Auto Generate Project and gave project name like OurAppTaskForms. The reason we did this is, so that it adds all the required dependent libraries, tag libs etc properly. For all remaining 9 .tasks file, we did NOT use auto generate. Instead we used standard New -> JSF From Human Task and select one task at a time and follow the steps. These steps are covered in the online documentation. At the end in our BPM App, we have just one UI Project with all the 10 screens.
3. ALSO, all the 10 screens have some common data. This we put in a reusable JSF Fragment page. And associated a custom Managed Bean for this to set and get values from this fragment and also some Actions for some buttons in the JSF. Then we included this JSF in each taskform jsf file, uisng the include tag. We added this include tag, somewhere in the top. So all screens share common jsf fragment page.
4. We can refine the above stuff further. As per above, we still have 10 JSF screens for each one of the 10 .tasks. Ofcourse all these 10 jsf have same common jsf fragment. BUT instead of 10 individual jsf screens, we can have only ONE Jsf screen also. Refer online docs for the details. The challenging part is, since we have only one jsf, there may be some bussiness stuff, validatoin stuff to take care of in custom ValidationCallback Handler classes. Say for Task1, we had to show some buttons, but NOT for Task2. So we had to handle this logic. Also in validation call back, we can always get each Tasks, title also. So we can workaround this issue also. We are in the process of doing this right now. But first 3, we already did and they are working fine.
My personal suggestion is first go with single jsf fragment and include in all tasks jsp files. Any changes to common elements need to make only in one place i.e fragment page.
Thanks
Ravi Jegga

FM import into RH project creates a separate folder for every FM chapter

I am importing a FM book into RH 9 to create a new help project. RH creates a separate folder for every FM chapter! The folder contains the html and CSS. This is messy and useless since all html will point to a single help CSS for the project. It will be tedious to move all the html topics to one folder plus I will lose the FM link for future updates.
Did I miss a step in the import that controls how the project is created in RH?

Yes, this is deliberate - in fact most people want to sub-divide their .fm files into even finer topics - that's what the pagination setting in the Conversion Settings screen is for. Why do you want them all to be mashed together anyway?
I've only heard of one other poster wanting to stuff all their FM content into one folder - try searching the forums. I seem to remember there were a bunch of suggestions to things to do from either the FM end of things or the RH side.
The reason why Adobe did it this way was to give you individual control over the CSS to be applied to individual topics (even if most of us just apply a common one across the board in the SSL recipe when we create our help).

I have 2 computers. Do I have to buy 2 separate downloads for each computer? Or can I save money and buy one download for both laptops.

I have 2 computers. Do I have to buy 2 separate downloads for each computer? Or can I save money and buy one download for both laptops.

Also, downloads are for only one platform, so the answer is yes only if both computers are windows computers or both are macs. To do one each you need the boxed version.

HT2534 I have just created an Apple Id for itunes, it is allowing me to get to the debit card stage but they no longer accept Visa Debit, there is no other option for me as i dont have any other cards and there isnt a 'none' option! HELP!!

I have just created an Apple Id for itunes, it is allowing me to get to the debit card stage but they no longer accept Visa Debit, there is no other option for me as i dont have any other cards and there isnt a 'none' option! HELP!!

How did you create the account ? Unless you followed the instructions on the page that you post from exactly then you won't get the 'none' option and you will need to enter payment details - those instructions won't work on existing accounts.
I tried those instructions a week ago in response to another thread and I got the 'none' option on it e.g. on my computer's iTunes I logged out of my existing account, found a free app in the store, clicked on its 'free' price, clicked on 'create Apple id' on the popup, and after agreeing to the terms and filling in my details I was able to select 'none' as my payment option and download a free app with it.

I have mistakenly created two separate catalogs, one in 5.6 and one in Lightroom 5 original. The latter is on my external drive, the former is on my hard drive. How do I merge them and upgrade the 5.0 main catalog?

In trying to dump my Elements 10 catalog into my LR catalog, I can see I have mistakenly created a second catalog. My main catalog is on the external drive and remains in the original 5.0 version, the "elements 10 upgraded" was imported into the 5.6 upgrade of LR and is on my hard drive. Can you advise how I can fix this?
Thanks in advance.
Barb in Virginia

OK Jim Hess, that step is done. So on the hard drive, can I now delete:
1. the "extra" LR catalog?
2. the Elements 10 Catalog (which I had previously imported into one of the LR catalogs?
That leaves me with a single catalog on an external drive. The only question is: what about backup catalogs? how do I determine where my "new consolidated" catalog is backing up to?
thanks in advance.

Do I have to create a new account for my iPhone, or can I use my iPod Touch account?

I have an iPod Touch 32GB which I have an iTunes account for, & I need to know whether I have to create a new iTunes account for my new iPhone 4 16GB, or whether I can use the other one for. Would syncing cause problems?

You don't need another iTunes account for your iPhone. You can link as many iDevices to your account as you wish. Each device will have its own name/identity and you can sync different apps/music/media to each.

Can I create a separate Library for specific music?

I've created a Playlist for Christmas music which works just fine but I don't want it in general rotation (we use Shuffle a lot). Can I create a separate library just for that - I can't seem to find any info on whether this is doable.
Thx

why not create a *smart playlist* that excludes genres such as "holidays" and "christmas" ?
JGG

I Have problems creating the file .lbs for a CIN.

I need to use code in C in a LabVIEW application, but I have problems creating the file .lbs that I have to include in the CIN node. I can do the file .c well, but I can't generate the file .lbs. I'm using CVI for doing the .c file. Could someone tell me the steps I have to do exactly?

T Sreedhar wrote:
> Hi Enrique,
>
> Can you resend the Example again please, I think ther is some problem
> with that file as I am unable to unzip it
I think you should check that the FTP download is configured right in
your client/web browser and you have no firewall problems. The file
unzips just fine here.
Rolf Kalbermatter
Rolf Kalbermatter
CIT Engineering Netherlands
a division of Test & Measurement Solutions

Do we hav to create a separate repository for Designer Repository??

Similar Messages

Maybe you are looking for